August 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH v2] ALSA: HDA: Early Forbid of runtime PM
by Harsha Priya 18 Sep '20

18 Sep '20

For certain codecs (like Realtek), pm_runtime_forbid() is invoked in the probe function after build_controls(). In a stress test, its observed occasionally that runtime PM calls are invoked before controls are built. This causes the codec to be runtime suspended before probe completes. Because of this, not all controls are enumerated correctly, and audio does not work until system is rebooted. This issue being common across all codecs, pm_runtime_forbid() is called when the codec object is created to fix this issue. A codec enables or disables runtime pm in its own probe function. Multiple stress tests of 2000+ cycles has been done to test the fix. Signed-off-by: Harsha Priya <harshapriya.n(a)intel.com> Signed-off-by: Emmanuel Jillela <emmanuel.jillela(a)intel.com> Reviewed-by: Kailang Yang <kailang(a)realtek.com> --- sound/pci/hda/hda_codec.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index e96a87f1b611..a356c21edb90 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -1000,6 +1000,9 @@ int snd_hda_codec_device_new(struct hda_bus *bus, struct snd_card *card, if (err < 0) goto error; + /* PM runtime needs to be enabled later after binding codec */ + pm_runtime_forbid(&codec->core.dev); + return 0; error: -- 2.17.1

3 3

[PATCH 01/10] dt-bindings: arm: samsung: pmu: Use unevaluatedProperties
by Krzysztof Kozlowski 16 Sep '20

16 Sep '20

Additional properties actually might appear (e.g. assigned-clocks) so use unevaluatedProperties to fix dtbs_check warnings like: arch/arm64/boot/dts/exynos/exynos5433-tm2.dt.yaml: system-controller@105c0000: 'assigned-clock-parents', 'assigned-clocks' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> --- Documentation/devicetree/bindings/arm/samsung/pmu.yaml | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml index 686c13c14e32..30ff2da81416 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml @@ -86,7 +86,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false allOf: - if: -- 2.17.1

6 35

[PATCH v2 0/2] ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation
by Kuninori Morimoto 10 Sep '20

10 Sep '20

Hi Rob, Mark These are v2 of switch to yaml base Documentation for audio-graph-card and renesas,rsnd which uses audio-graph-card. v1 -> v2 - upgrade dt-schema, and fixup errors for [2/2] patch Kuninori Morimoto (2): ASoC: dt-bindings: audio-graph-card: switch to yaml base Documentation ASoC: dt-bindings: renesas,rsnd: switch to yaml base Documentation .../bindings/sound/audio-graph-card.txt | 337 ------------ .../bindings/sound/audio-graph-card.yaml | 135 +++++ .../bindings/sound/renesas,rsnd.txt | 520 ------------------ .../bindings/sound/renesas,rsnd.yaml | 454 +++++++++++++++ .../devicetree/bindings/vendor-prefixes.yaml | 2 +- 5 files changed, 590 insertions(+), 858 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.yaml create mode 100644 Documentation/devicetree/bindings/sound/renesas,rsnd.yaml -- 2.25.1

2 6

[PATCH] drm/vc4/vc4_hdmi: fill ASoC card owner
by Marek Szyprowski 09 Sep '20

09 Sep '20

card->owner is a required property and since commit 81033c6b584b ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Fix lack of it. This fixes following warning observed on RaspberryPi 3B board with ARM 32bit kernel and multi_v7_defconfig: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 210 at sound/core/init.c:207 snd_card_new+0x378/0x398 [snd] Modules linked in: vc4(+) snd_soc_core ac97_bus snd_pcm_dmaengine bluetooth snd_pcm snd_timer crc32_arm_ce raspberrypi_hwmon snd soundcore ecdh_generic ecc bcm2835_thermal phy_generic CPU: 1 PID: 210 Comm: systemd-udevd Not tainted 5.8.0-rc1-00027-g81033c6b584b #1087 Hardware name: BCM2835 [<c03113c0>] (unwind_backtrace) from [<c030bcb4>] (show_stack+0x10/0x14) [<c030bcb4>] (show_stack) from [<c071cef8>] (dump_stack+0xd4/0xe8) [<c071cef8>] (dump_stack) from [<c0345bfc>] (__warn+0xdc/0xf4) [<c0345bfc>] (__warn) from [<c0345cc4>] (warn_slowpath_fmt+0xb0/0xb8) [<c0345cc4>] (warn_slowpath_fmt) from [<bf02ff74>] (snd_card_new+0x378/0x398 [snd]) [<bf02ff74>] (snd_card_new [snd]) from [<bf11f0b4>] (snd_soc_bind_card+0x280/0x99c [snd_soc_core]) [<bf11f0b4>] (snd_soc_bind_card [snd_soc_core]) from [<bf12f000>] (devm_snd_soc_register_card+0x34/0x6c [snd_soc_core]) [<bf12f000>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf165654>] (vc4_hdmi_bind+0x43c/0x5f4 [vc4]) [<bf165654>] (vc4_hdmi_bind [vc4]) from [<c09d660c>] (component_bind_all+0xec/0x24c) [<c09d660c>] (component_bind_all) from [<bf15c44c>] (vc4_drm_bind+0xd4/0x174 [vc4]) [<bf15c44c>] (vc4_drm_bind [vc4]) from [<c09d6ac0>] (try_to_bring_up_master+0x160/0x1b0) [<c09d6ac0>] (try_to_bring_up_master) from [<c09d6f38>] (component_master_add_with_match+0xd0/0x104) [<c09d6f38>] (component_master_add_with_match) from [<bf15c588>] (vc4_platform_drm_probe+0x9c/0xbc [vc4]) [<bf15c588>] (vc4_platform_drm_probe [vc4]) from [<c09df740>] (platform_drv_probe+0x6c/0xa4) [<c09df740>] (platform_drv_probe) from [<c09dd6f0>] (really_probe+0x210/0x350) [<c09dd6f0>] (really_probe) from [<c09dd940>] (driver_probe_device+0x5c/0xb4) [<c09dd940>] (driver_probe_device) from [<c09ddb38>] (device_driver_attach+0x58/0x60) [<c09ddb38>] (device_driver_attach) from [<c09ddbc0>] (__driver_attach+0x80/0xbc) [<c09ddbc0>] (__driver_attach) from [<c09db820>] (bus_for_each_dev+0x68/0xb4) [<c09db820>] (bus_for_each_dev) from [<c09dc9f8>] (bus_add_driver+0x130/0x1e8) [<c09dc9f8>] (bus_add_driver) from [<c09de648>] (driver_register+0x78/0x110) [<c09de648>] (driver_register) from [<c0302038>] (do_one_initcall+0x50/0x220) [<c0302038>] (do_one_initcall) from [<c03db544>] (do_init_module+0x60/0x210) [<c03db544>] (do_init_module) from [<c03da4f8>] (load_module+0x1e34/0x2338) [<c03da4f8>] (load_module) from [<c03dac00>] (sys_finit_module+0xac/0xbc) [<c03dac00>] (sys_finit_module) from [<c03000c0>] (ret_fast_syscall+0x0/0x54) Exception stack(0xeded9fa8 to 0xeded9ff0) ... ---[ end trace 6414689569c2bc08 ]--- Suggested-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- drivers/gpu/drm/vc4/vc4_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 625bfcf52dc4..bdcc54c87d7e 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -1117,6 +1117,7 @@ static int vc4_hdmi_audio_init(struct vc4_hdmi *hdmi) card->num_links = 1; card->name = "vc4-hdmi"; card->dev = dev; + card->owner = THIS_MODULE; /* * Be careful, snd_soc_register_card() calls dev_set_drvdata() and -- 2.17.1

3 5

[PATCH] soundwire: cadence: fix race condition between suspend and Slave device alerts
by Bard Liao 09 Sep '20

09 Sep '20

From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> In system suspend stress cases, the SOF CI reports timeouts. The root cause is that an alert is generated while the system suspends. The interrupt handling generates transactions on the bus that will never be handled because the interrupts are disabled in parallel. As a result, the transaction never completes and times out on resume. This error doesn't seem too problematic since it happens in a work queue, and the system recovers without issues. Nevertheless, this race condition should not happen. When doing a system suspend, or when disabling interrupts, we should make sure the current transaction can complete, and prevent new work from being queued. BugLink: https://github.com/thesofproject/linux/issues/2344 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Reviewed-by: Rander Wang <rander.wang(a)linux.intel.com> Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/cadence_master.c | 24 +++++++++++++++++++++++- drivers/soundwire/cadence_master.h | 1 + 2 files changed, 24 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 24eafe0aa1c3..1330ffc47596 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -791,7 +791,16 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id) CDNS_MCP_INT_SLAVE_MASK, 0); int_status &= ~CDNS_MCP_INT_SLAVE_MASK; - schedule_work(&cdns->work); + + /* + * Deal with possible race condition between interrupt + * handling and disabling interrupts on suspend. + * + * If the master is in the process of disabling + * interrupts, don't schedule a workqueue + */ + if (cdns->interrupt_enabled) + schedule_work(&cdns->work); } cdns_writel(cdns, CDNS_MCP_INTSTAT, int_status); @@ -924,6 +933,19 @@ int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns, bool state) slave_state = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1); cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT1, slave_state); } + cdns->interrupt_enabled = state; + + /* + * Complete any on-going status updates before updating masks, + * and cancel queued status updates. + * + * There could be a race with a new interrupt thrown before + * the 3 mask updates below are complete, so in the interrupt + * we use the 'interrupt_enabled' status to prevent new work + * from being queued. + */ + if (!state) + cancel_work_sync(&cdns->work); cdns_writel(cdns, CDNS_MCP_SLAVE_INTMASK0, slave_intmask0); cdns_writel(cdns, CDNS_MCP_SLAVE_INTMASK1, slave_intmask1); diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h index fdec62b912d3..4d1aab5b5ec2 100644 --- a/drivers/soundwire/cadence_master.h +++ b/drivers/soundwire/cadence_master.h @@ -133,6 +133,7 @@ struct sdw_cdns { bool link_up; unsigned int msg_count; + bool interrupt_enabled; struct work_struct work; -- 2.17.1

4 8

[PATCH 0/7] soundwire: filter out invalid PARITY errors
by Bard Liao 09 Sep '20

09 Sep '20

Some codecs may report fake PARITY errors in the initial state. This series will filter them out. Pierre-Louis Bossart (7): soundwire: bus: use property to set interrupt masks soundwire: bus: filter-out unwanted interrupt reports soundwire: slave: add first_interrupt_done status soundwire: bus: use quirk to filter out invalid parity errors ASoC: codecs: realtek-soundwire: ignore initial PARITY errors soundwire: bus: export broadcast read/write capability for tests soundwire: cadence: add parity error injection through debugfs drivers/soundwire/bus.c | 93 ++++++++++++++++++++++++------ drivers/soundwire/bus.h | 4 ++ drivers/soundwire/cadence_master.c | 86 +++++++++++++++++++++++++++ drivers/soundwire/slave.c | 1 + include/linux/soundwire/sdw.h | 9 +++ sound/soc/codecs/max98373-sdw.c | 3 + sound/soc/codecs/rt1308-sdw.c | 3 + sound/soc/codecs/rt5682-sdw.c | 5 ++ sound/soc/codecs/rt700-sdw.c | 5 ++ sound/soc/codecs/rt711-sdw.c | 5 ++ sound/soc/codecs/rt715-sdw.c | 5 ++ sound/soc/codecs/wsa881x.c | 1 + 12 files changed, 202 insertions(+), 18 deletions(-) -- 2.17.1

6 19

[PATCH V2] ASoC: Intel: boards: Use FS as nau8825 sysclk in nau88125_* machine
by Radoslaw Biernacki 08 Sep '20

08 Sep '20

This single fix address two issues on machines with nau88125: 1) Audio distortion, due to lack of required clock rate on MCLK line 2) Loud audible "pops" on headphones if there is no sysclk during nau8825 playback power up sequence Explanation for: 1) Due to Skylake HW limitation, MCLK pin can only output 24MHz clk rate (it can be only connected to XTAL parent clk). The BCLK pin can be driven by dividers and therefore FW is able to set it to rate required by chosen audio format. According to nau8825 datasheet, 256*FS sysclk gives the best audio quality and the only way to achieve this (taking into account the above limitations) its to regenerate the MCLK from BCLK on nau8825 side by FFL. Without required clk rate, audio is distorted by added harmonics. 2) Currently Skylake does not output MCLK/FS when the back-end DAI op hw_param is called, so we cannot switch to MCLK/FS in hw_param. This patch reduces pop by letting nau8825 keep using its internal VCO clock during widget power up sequence, until SNDRV_PCM_TRIGGER_START when MCLK/FS is available. Once device resumes, the system will only enable power sequence for playback without doing hardware parameter, audio format, and PLL configure. In the mean time, the jack detecion sequence has changed PLL parameters and switched to internal clock. Thus, the playback signal distorted without correct PLL parameters. That is why we need to configure the PLL again in SNDRV_PCM_TRIGGER_RESUME case. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> Signed-off-by: Yong Zhi <yong.zhi(a)intel.com> Signed-off-by: Mac Chiang <mac.chiang(a)intel.com> Signed-off-by: Ben Zhang <benzh(a)chromium.org> Signed-off-by: Radoslaw Biernacki <rad(a)semihalf.com> --- .../soc/intel/boards/skl_nau88l25_max98357a.c | 72 +++++++++++++----- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 73 ++++++++++++++----- 2 files changed, 107 insertions(+), 38 deletions(-) diff --git a/sound/soc/intel/boards/skl_nau88l25_max98357a.c b/sound/soc/intel/boards/skl_nau88l25_max98357a.c index d7b8154c43a4..0f3cea1342d1 100644 --- a/sound/soc/intel/boards/skl_nau88l25_max98357a.c +++ b/sound/soc/intel/boards/skl_nau88l25_max98357a.c @@ -8,6 +8,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/jack.h> #include <sound/pcm.h> @@ -47,7 +48,7 @@ enum { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; @@ -60,14 +61,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -292,24 +286,40 @@ static const struct snd_soc_ops skylake_nau8825_fe_ops = { .startup = skl_fe_startup, }; -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); + int ret = 0; - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + case SNDRV_PCM_TRIGGER_RESUME: + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + msleep(20); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, @@ -630,10 +640,34 @@ static int skylake_card_late_probe(struct snd_soc_card *card) return hdac_hdmi_jack_port_init(component, &card->dapm); } +static int __maybe_unused skylake_nau8825_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai; + + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found\n"); + return -EIO; + } + + dev_dbg(codec_dai->dev, "playback_active:%d playback_widget->active:%d codec_dai->rate:%d\n", + codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK], + codec_dai->playback_widget->active, + codec_dai->rate); + + if (codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK] && + codec_dai->playback_widget->active) + snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + + return 0; +} + /* skylake audio machine driver for SPT + NAU88L25 */ static struct snd_soc_card skylake_audio_card = { .name = "sklnau8825max", .owner = THIS_MODULE, + .resume_post = skylake_nau8825_resume_post, .dai_link = skylake_dais, .num_links = ARRAY_SIZE(skylake_dais), .controls = skylake_controls, diff --git a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c index 4b317bcf6ea0..be44a40067f0 100644 --- a/sound/soc/intel/boards/skl_nau88l25_ssm4567.c +++ b/sound/soc/intel/boards/skl_nau88l25_ssm4567.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/delay.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/soc.h> @@ -57,7 +58,7 @@ static const struct snd_kcontrol_new skylake_controls[] = { }; static int platform_clock_control(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *k, int event) + struct snd_kcontrol *k, int event) { struct snd_soc_dapm_context *dapm = w->dapm; struct snd_soc_card *card = dapm->card; @@ -70,14 +71,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } - if (SND_SOC_DAPM_EVENT_ON(event)) { - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); - if (ret < 0) { - dev_err(card->dev, "set sysclk err = %d\n", ret); - return -EIO; - } - } else { + if (!SND_SOC_DAPM_EVENT_ON(event)) { ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_INTERNAL, 0, SND_SOC_CLOCK_IN); if (ret < 0) { @@ -85,6 +79,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, return -EIO; } } + return ret; } @@ -344,24 +339,40 @@ static int skylake_dmic_fixup(struct snd_soc_pcm_runtime *rtd, return 0; } -static int skylake_nau8825_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int skylake_nau8825_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_pcm_runtime *runtime = substream->runtime; struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - int ret; - - ret = snd_soc_dai_set_sysclk(codec_dai, - NAU8825_CLK_MCLK, 24000000, SND_SOC_CLOCK_IN); + int ret = 0; - if (ret < 0) - dev_err(rtd->dev, "snd_soc_dai_set_sysclk err = %d\n", ret); + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + ret = snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(codec_dai->dev, "can't set FS clock %d\n", ret); + break; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + break; + case SNDRV_PCM_TRIGGER_RESUME: + ret = snd_soc_dai_set_pll(codec_dai, 0, 0, runtime->rate, + runtime->rate * 256); + if (ret < 0) + dev_err(codec_dai->dev, "can't set FLL: %d\n", ret); + msleep(20); + break; + } return ret; } -static const struct snd_soc_ops skylake_nau8825_ops = { - .hw_params = skylake_nau8825_hw_params, +static struct snd_soc_ops skylake_nau8825_ops = { + .trigger = skylake_nau8825_trigger, }; static const unsigned int channels_dmic[] = { @@ -671,10 +682,34 @@ static int skylake_card_late_probe(struct snd_soc_card *card) return hdac_hdmi_jack_port_init(component, &card->dapm); } +static int __maybe_unused skylake_nau8825_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_dai *codec_dai; + + codec_dai = snd_soc_card_get_codec_dai(card, SKL_NUVOTON_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found\n"); + return -EIO; + } + + dev_dbg(codec_dai->dev, "playback_active:%d playback_widget->active:%d codec_dai->rate:%d\n", + codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK], + codec_dai->playback_widget->active, + codec_dai->rate); + + if (codec_dai->stream_active[SNDRV_PCM_STREAM_PLAYBACK] && + codec_dai->playback_widget->active) + snd_soc_dai_set_sysclk(codec_dai, NAU8825_CLK_FLL_FS, 0, + SND_SOC_CLOCK_IN); + + return 0; +} + /* skylake audio machine driver for SPT + NAU88L25 */ static struct snd_soc_card skylake_audio_card = { .name = "sklnau8825adi", .owner = THIS_MODULE, + .resume_post = skylake_nau8825_resume_post, .dai_link = skylake_dais, .num_links = ARRAY_SIZE(skylake_dais), .controls = skylake_controls, -- 2.17.1

5 8

[PATCH V2] ASoC: fsl: imx-es8328: add missing put_device() call in imx_es8328_probe()
by Yu Kuai 08 Sep '20

08 Sep '20

if of_find_device_by_node() succeed, imx_es8328_probe() doesn't have a corresponding put_device(). Thus add a jump target to fix the exception handling for this function implementation. Fixes: 7e7292dba215 ("ASoC: fsl: add imx-es8328 machine driver") Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- Changes from V1: - remove the first patch in patch series sound/soc/fsl/imx-es8328.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/imx-es8328.c b/sound/soc/fsl/imx-es8328.c index 15a27a2cd0ca..fad1eb6253d5 100644 --- a/sound/soc/fsl/imx-es8328.c +++ b/sound/soc/fsl/imx-es8328.c @@ -145,13 +145,13 @@ static int imx_es8328_probe(struct platform_device *pdev) data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) { ret = -ENOMEM; - goto fail; + goto put_device; } comp = devm_kzalloc(dev, 3 * sizeof(*comp), GFP_KERNEL); if (!comp) { ret = -ENOMEM; - goto fail; + goto put_device; } data->dev = dev; @@ -182,12 +182,12 @@ static int imx_es8328_probe(struct platform_device *pdev) ret = snd_soc_of_parse_card_name(&data->card, "model"); if (ret) { dev_err(dev, "Unable to parse card name\n"); - goto fail; + goto put_device; } ret = snd_soc_of_parse_audio_routing(&data->card, "audio-routing"); if (ret) { dev_err(dev, "Unable to parse routing: %d\n", ret); - goto fail; + goto put_device; } data->card.num_links = 1; data->card.owner = THIS_MODULE; @@ -196,10 +196,12 @@ static int imx_es8328_probe(struct platform_device *pdev) ret = snd_soc_register_card(&data->card); if (ret) { dev_err(dev, "Unable to register: %d\n", ret); - goto fail; + goto put_device; } platform_set_drvdata(pdev, data); +put_device: + put_device(&ssi_pdev->dev); fail: of_node_put(ssi_np); of_node_put(codec_np); -- 2.25.4

2 1

[PATCH v2 0/2] ASoC: qcom: common: Parse auxiliary devices from device tree
by Stephan Gerhold 08 Sep '20

08 Sep '20

In some cases we need to probe additional audio components that do not appear as part of the DAI links specified in the device tree. Examples for this are auxiliary devices such as analog amplifiers or codecs. The ASoC core provides a way to probe these components by adding them to snd_soc_card->aux_dev. This patch set allows specifying them in the device tree through a new "aux-devs" property. v1: https://lore.kernel.org/linux-arm-msm/20200819091533.2334-1-stephan@gerhold… Changes in v2: - Fix value type in device tree bindings: aux-devs should be array of phandles without any arguments, so change <phandles with arguments> -> <array of phandles> Stephan Gerhold (2): ASoC: dt-bindings: qcom: Document "aux-devs" property ASoC: qcom: common: Parse auxiliary devices from device tree .../devicetree/bindings/sound/qcom,apq8016-sbc.txt | 7 +++++++ Documentation/devicetree/bindings/sound/qcom,apq8096.txt | 8 ++++++++ Documentation/devicetree/bindings/sound/qcom,sdm845.txt | 8 ++++++++ sound/soc/qcom/common.c | 4 ++++ 4 files changed, 27 insertions(+) -- 2.28.0

2 3

[PATCH v2] Revert "ALSA: hda: Add support for Loongson 7A1000 controller"
by Tiezhu Yang 08 Sep '20

08 Sep '20

This reverts commit 61eee4a7fc40 ("ALSA: hda: Add support for Loongson 7A1000 controller") to fix the following error on the Loongson LS7A platform: rcu: INFO: rcu_preempt self-detected stall on CPU <SNIP> NMI backtrace for cpu 0 CPU: 0 PID: 68 Comm: kworker/0:2 Not tainted 5.8.0+ #3 Hardware name: , BIOS Workqueue: events azx_probe_work [snd_hda_intel] <SNIP> Call Trace: [<ffffffff80211a64>] show_stack+0x9c/0x130 [<ffffffff8065a740>] dump_stack+0xb0/0xf0 [<ffffffff80665774>] nmi_cpu_backtrace+0x134/0x140 [<ffffffff80665910>] nmi_trigger_cpumask_backtrace+0x190/0x200 [<ffffffff802b1abc>] rcu_dump_cpu_stacks+0x12c/0x190 [<ffffffff802b08cc>] rcu_sched_clock_irq+0xa2c/0xfc8 [<ffffffff802b91d4>] update_process_times+0x2c/0xb8 [<ffffffff802cad80>] tick_sched_timer+0x40/0xb8 [<ffffffff802ba5f0>] __hrtimer_run_queues+0x118/0x1d0 [<ffffffff802bab74>] hrtimer_interrupt+0x12c/0x2d8 [<ffffffff8021547c>] c0_compare_interrupt+0x74/0xa0 [<ffffffff80296bd0>] __handle_irq_event_percpu+0xa8/0x198 [<ffffffff80296cf0>] handle_irq_event_percpu+0x30/0x90 [<ffffffff8029d958>] handle_percpu_irq+0x88/0xb8 [<ffffffff80296124>] generic_handle_irq+0x44/0x60 [<ffffffff80b3cfd0>] do_IRQ+0x18/0x28 [<ffffffff8067ace4>] plat_irq_dispatch+0x64/0x100 [<ffffffff80209a20>] handle_int+0x140/0x14c [<ffffffff802402e8>] irq_exit+0xf8/0x100 Because AZX_DRIVER_GENERIC can not work well for Loongson LS7A HDA controller, it needs some workarounds which are not merged into the upstream kernel at this time, so it should revert this patch now. Fixes: 61eee4a7fc40 ("ALSA: hda: Add support for Loongson 7A1000 controller") Cc: <stable(a)vger.kernel.org> # 5.9-rc1+ Signed-off-by: Tiezhu Yang <yangtiezhu(a)loongson.cn> --- v2: update commit message sound/pci/hda/hda_intel.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index e34a4d5..0f86e37 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2745,8 +2745,6 @@ static const struct pci_device_id azx_ids[] = { .driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI }, /* Zhaoxin */ { PCI_DEVICE(0x1d17, 0x3288), .driver_data = AZX_DRIVER_ZHAOXIN }, - /* Loongson */ - { PCI_DEVICE(0x0014, 0x7a07), .driver_data = AZX_DRIVER_GENERIC }, { 0, } }; MODULE_DEVICE_TABLE(pci, azx_ids); -- 2.1.0

4 4