June 2020 - Alsa-devel - mailman.alsa-project.org

[v2, 1/2] ASoC: mediatek: mt6358: support DMIC one-wire mode
by Jiaxin Yu 05 Jun '20

05 Jun '20

Supports DMIC one-wire mode. Uses a DT property "dmic-mode" to select. Signed-off-by: Jiaxin Yu <jiaxin.yu(a)mediatek.com> --- sound/soc/codecs/mt6358.c | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c index 1b830ea..1f39d59 100644 --- a/sound/soc/codecs/mt6358.c +++ b/sound/soc/codecs/mt6358.c @@ -95,6 +95,8 @@ struct mt6358_priv { struct regulator *avdd_reg; int wov_enabled; + + unsigned int dmic_one_wire_mode; }; int mt6358_set_mtkaif_protocol(struct snd_soc_component *cmpnt, @@ -1831,7 +1833,10 @@ static int mt6358_dmic_enable(struct mt6358_priv *priv) mt6358_mtkaif_tx_enable(priv); /* UL dmic setting */ - regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_H, 0x0080); + if (priv->dmic_one_wire_mode) + regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_H, 0x0400); + else + regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_H, 0x0080); /* UL turn on */ regmap_write(priv->regmap, MT6358_AFE_UL_SRC_CON0_L, 0x0003); @@ -2426,6 +2431,20 @@ static int mt6358_codec_probe(struct snd_soc_component *cmpnt) .num_dapm_routes = ARRAY_SIZE(mt6358_dapm_routes), }; +static void mt6358_parse_dt(struct mt6358_priv *priv) +{ + int ret; + struct device *dev = priv->dev; + + ret = of_property_read_u32(dev->of_node, "mediatek,dmic-mode", + &priv->dmic_one_wire_mode); + if (ret) { + dev_warn(priv->dev, "%s() failed to read dmic-mode\n", + __func__); + priv->dmic_one_wire_mode = 0; + } +} + static int mt6358_platform_driver_probe(struct platform_device *pdev) { struct mt6358_priv *priv; @@ -2445,6 +2464,8 @@ static int mt6358_platform_driver_probe(struct platform_device *pdev) if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); + mt6358_parse_dt(priv); + dev_info(priv->dev, "%s(), dev name %s\n", __func__, dev_name(&pdev->dev)); -- 1.8.1.1.dirty

1 1

[PATCH v2] ALSA: usb-audio: Manage auto-pm of all bundled interfaces
by Takashi Iwai 05 Jun '20

05 Jun '20

Currently USB-audio driver manages the auto-pm of the primary interface although a card may consist of multiple interfaces. This may leave the secondary and other interfaces left running unnecessarily after the auto-suspend. This patch allows the driver managing the auto-pm of all bundled interfaces per card. The chip->pm_intf field is extended as chip->intf[] to contain the array of assigned interfaces, and the runtime-PM is performed to all those interfaces. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- v1->v2: fix a typo that caused a build error sound/usb/card.c | 35 ++++++++++++++++++++++++++++++----- sound/usb/usbaudio.h | 4 +++- 2 files changed, 33 insertions(+), 6 deletions(-) diff --git a/sound/usb/card.c b/sound/usb/card.c index 359f7a04be1c..162bdd6eb4d4 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -634,7 +634,6 @@ static int usb_audio_probe(struct usb_interface *intf, id, &chip); if (err < 0) goto __error; - chip->pm_intf = intf; break; } else if (vid[i] != -1 || pid[i] != -1) { dev_info(&dev->dev, @@ -651,6 +650,13 @@ static int usb_audio_probe(struct usb_interface *intf, goto __error; } } + + if (chip->num_interfaces >= MAX_CARD_INTERFACES) { + dev_info(&dev->dev, "Too many interfaces assigned to the single USB-audio card\n"); + err = -EINVAL; + goto __error; + } + dev_set_drvdata(&dev->dev, chip); /* @@ -703,6 +709,7 @@ static int usb_audio_probe(struct usb_interface *intf, } usb_chip[chip->index] = chip; + chip->intf[chip->num_interfaces] = intf; chip->num_interfaces++; usb_set_intfdata(intf, chip); atomic_dec(&chip->active); @@ -818,19 +825,37 @@ void snd_usb_unlock_shutdown(struct snd_usb_audio *chip) int snd_usb_autoresume(struct snd_usb_audio *chip) { + int i, err; + if (atomic_read(&chip->shutdown)) return -EIO; - if (atomic_inc_return(&chip->active) == 1) - return usb_autopm_get_interface(chip->pm_intf); + if (atomic_inc_return(&chip->active) != 1) + return 0; + + for (i = 0; i < chip->num_interfaces; i++) { + err = usb_autopm_get_interface(chip->intf[i]); + if (err < 0) { + /* rollback */ + while (--i >= 0) + usb_autopm_put_interface(chip->intf[i]); + atomic_dec(&chip->active); + return err; + } + } return 0; } void snd_usb_autosuspend(struct snd_usb_audio *chip) { + int i; + if (atomic_read(&chip->shutdown)) return; - if (atomic_dec_and_test(&chip->active)) - usb_autopm_put_interface(chip->pm_intf); + if (!atomic_dec_and_test(&chip->active)) + return; + + for (i = 0; i < chip->num_interfaces; i++) + usb_autopm_put_interface(chip->intf[i]); } static int usb_audio_suspend(struct usb_interface *intf, pm_message_t message) diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index e0ebfb25fbd5..b91c4c0807ec 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -19,11 +19,13 @@ struct media_device; struct media_intf_devnode; +#define MAX_CARD_INTERFACES 16 + struct snd_usb_audio { int index; struct usb_device *dev; struct snd_card *card; - struct usb_interface *pm_intf; + struct usb_interface *intf[MAX_CARD_INTERFACES]; u32 usb_id; struct mutex mutex; unsigned int system_suspend; -- 2.16.4

1 0

[sound:for-next 141/141] sound/usb/card.c:841:29: error: expected ';' after expression
by kernel test robot 04 Jun '20

04 Jun '20

tree: https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git for-next head: 3398e5c7b0383a1795090d76545884091636644c commit: 3398e5c7b0383a1795090d76545884091636644c [141/141] ALSA: usb-audio: Manage auto-pm of all bundled interfaces config: x86_64-allyesconfig (attached as .config) compiler: clang version 11.0.0 (https://github.com/llvm/llvm-project ac47588bc4ff5927a01ed6fcd269ce86aba52a7c) reproduce (this is a W=1 build): wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross # install x86_64 cross compiling tool for clang build # apt-get install binutils-x86-64-linux-gnu git checkout 3398e5c7b0383a1795090d76545884091636644c # save the attached .config to linux build tree COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross ARCH=x86_64 If you fix the issue, kindly add following tag as appropriate Reported-by: kernel test robot <lkp(a)intel.com> All errors (new ones prefixed by >>, old ones prefixed by <<): >> sound/usb/card.c:841:29: error: expected ';' after expression atomic_dec(&chip->active)) ^ ; >> sound/usb/card.c:841:29: error: expected expression 2 errors generated. vim +841 sound/usb/card.c 825 826 int snd_usb_autoresume(struct snd_usb_audio *chip) 827 { 828 int i, err; 829 830 if (atomic_read(&chip->shutdown)) 831 return -EIO; 832 if (atomic_inc_return(&chip->active) != 1) 833 return 0; 834 835 for (i = 0; i < chip->num_interfaces; i++) { 836 err = usb_autopm_get_interface(chip->intf[i]); 837 if (err < 0) { 838 /* rollback */ 839 while (--i >= 0) 840 usb_autopm_put_interface(chip->intf[i]); > 841 atomic_dec(&chip->active)) 842 return err; 843 } 844 } 845 return 0; 846 } 847 --- 0-DAY CI Kernel Test Service, Intel Corporation https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

1 0

[PATCH] sound/pci/hda: add sienna_cichlid audio asic id for sienna_cichlid up
by Alex Deucher 04 Jun '20

04 Jun '20

From: Hersen Wu <hersenxs.wu(a)amd.com> dp/hdmi ati hda is not shown in audio settings Signed-off-by: Hersen Wu <hersenxs.wu(a)amd.com> Reviewed-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- sound/pci/hda/hda_intel.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 92a042e34d3e..4188bc4bd4e2 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2643,6 +2643,9 @@ static const struct pci_device_id azx_ids[] = { { PCI_DEVICE(0x1002, 0xab38), .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS | AZX_DCAPS_PM_RUNTIME }, + { PCI_DEVICE(0x1002, 0xab28), + .driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI_NS | + AZX_DCAPS_PM_RUNTIME }, /* VIA VT8251/VT8237A */ { PCI_DEVICE(0x1106, 0x3288), .driver_data = AZX_DRIVER_VIA }, /* VIA GFX VT7122/VX900 */ -- 2.25.4

2 2

[v2 PATCH] ASoC: max98390: Fix potential crash during param fw loading
by Steve Lee 04 Jun '20

04 Jun '20

malformed firmware file can cause out-of-bound access and crash during dsm_param bin loading. - add MIN/MAX param size to avoid out-of-bound access. - read start addr and size of param and check bound. - add condition that fw->size > param_size + _PAYLOAD_OFFSET to confirm enough data. Signed-off-by: Steve Lee <steves.lee(a)maximintegrated.com> --- Change log v2: * add condtion that param_size + _PAYLOAD_OFFSET is less than fw->size to confirm enough data * remove unintended code sound/soc/codecs/max98390.c | 24 ++++++++++++++++++++---- sound/soc/codecs/max98390.h | 3 ++- 2 files changed, 22 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index be7cd0aeb6a6..0d63ebfbff2f 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -754,6 +754,7 @@ static struct snd_soc_dai_driver max98390_dai[] = { static int max98390_dsm_init(struct snd_soc_component *component) { int ret; + int param_size, param_start_addr; char filename[128]; const char *vendor, *product; struct max98390_priv *max98390 = @@ -780,14 +781,29 @@ static int max98390_dsm_init(struct snd_soc_component *component) dev_dbg(component->dev, "max98390: param fw size %zd\n", fw->size); + if (fw->size < MAX98390_DSM_PARAM_MIN_SIZE) { + dev_err(component->dev, + "param fw is invalid.\n"); + goto err_alloc; + } dsm_param = (char *)fw->data; + param_start_addr = (dsm_param[0] & 0xff) | (dsm_param[1] & 0xff) << 8; + param_size = (dsm_param[2] & 0xff) | (dsm_param[3] & 0xff) << 8; + if (param_size > MAX98390_DSM_PARAM_MAX_SIZE || + param_start_addr < DSM_STBASS_HPF_B0_BYTE0 || + fw->size < param_size + MAX98390_DSM_PAYLOAD_OFFSET) { + dev_err(component->dev, + "param fw is invalid.\n"); + goto err_alloc; + } + regmap_write(max98390->regmap, MAX98390_R203A_AMP_EN, 0x80); dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; - regmap_bulk_write(max98390->regmap, DSM_EQ_BQ1_B0_BYTE0, - dsm_param, - fw->size - MAX98390_DSM_PAYLOAD_OFFSET); - release_firmware(fw); + regmap_bulk_write(max98390->regmap, param_start_addr, + dsm_param, param_size); regmap_write(max98390->regmap, MAX98390_R23E1_DSP_GLOBAL_EN, 0x01); +err_alloc: + release_firmware(fw); err: return ret; } diff --git a/sound/soc/codecs/max98390.h b/sound/soc/codecs/max98390.h index f59cb114d957..5f444e7779b0 100644 --- a/sound/soc/codecs/max98390.h +++ b/sound/soc/codecs/max98390.h @@ -650,7 +650,8 @@ /* DSM register offset */ #define MAX98390_DSM_PAYLOAD_OFFSET 16 -#define MAX98390_DSM_PAYLOAD_OFFSET_2 495 +#define MAX98390_DSM_PARAM_MAX_SIZE 770 +#define MAX98390_DSM_PARAM_MIN_SIZE 670 struct max98390_priv { struct regmap *regmap; -- 2.17.1

2 1

[PATCH] ASoC: rl6231: Modify the target DMIC clock rate
by Oder Chiou 04 Jun '20

04 Jun '20

Some DMIC components will not work correctly in the clock rate 3.072MHz. We recommend the clock rate 1.536MHz in the gerenal case. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- sound/soc/codecs/rl6231.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/rl6231.c b/sound/soc/codecs/rl6231.c index 2586d1cafc0c..8c9daf32bab8 100644 --- a/sound/soc/codecs/rl6231.c +++ b/sound/soc/codecs/rl6231.c @@ -80,8 +80,8 @@ int rl6231_calc_dmic_clk(int rate) for (i = 0; i < ARRAY_SIZE(div); i++) { if ((div[i] % 3) == 0) continue; - /* find divider that gives DMIC frequency below 3.072MHz */ - if (3072000 * div[i] >= rate) + /* find divider that gives DMIC frequency below 1.536MHz */ + if (1536000 * div[i] >= rate) return i; } -- 2.25.1

2 1

[PATCH] ASoC: max98390: Fix incorrect printf qualifier
by Takashi Iwai 04 Jun '20

04 Jun '20

This patch addresses a compile warning: sound/soc/codecs/max98390.c:781:3: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 4 has type ‘size_t {aka const unsigned int}’ [-Wformat=] Fixes: a6e3f4f34cdb ("ASoC: max98390: Added Amplifier Driver") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/soc/codecs/max98390.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/max98390.c b/sound/soc/codecs/max98390.c index b9ce44dda886..be7cd0aeb6a6 100644 --- a/sound/soc/codecs/max98390.c +++ b/sound/soc/codecs/max98390.c @@ -778,7 +778,7 @@ static int max98390_dsm_init(struct snd_soc_component *component) } dev_dbg(component->dev, - "max98390: param fw size %ld\n", + "max98390: param fw size %zd\n", fw->size); dsm_param = (char *)fw->data; dsm_param += MAX98390_DSM_PAYLOAD_OFFSET; -- 2.16.4

2 2

[PATCH] ASoC: fsl-asoc-card: Defer probe when fail to find codec device
by Shengjiu Wang 04 Jun '20

04 Jun '20

Defer probe when fail to find codec device, because the codec device maybe probed later than machine driver. Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> --- sound/soc/fsl/fsl-asoc-card.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c index cf4feb835743..00be73900888 100644 --- a/sound/soc/fsl/fsl-asoc-card.c +++ b/sound/soc/fsl/fsl-asoc-card.c @@ -581,7 +581,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev) if (!fsl_asoc_card_is_ac97(priv) && !codec_dev) { dev_err(&pdev->dev, "failed to find codec device\n"); - ret = -EINVAL; + ret = -EPROBE_DEFER; goto asrc_fail; } -- 2.21.0

2 1

Re: [PATCH] ASoC: max98390: fix build warning detected by -Wformat
by Mark Brown 04 Jun '20

04 Jun '20

On Thu, Jun 04, 2020 at 04:49:34PM +0800, Xiaoming Ni wrote: > Fix build warning: > sound/soc/codecs/max98390.c:781:3: warning: format '%ld' expects > argument of type 'long int', but argument 4 has type 'size_t {aka > const unsigned int}' [-Wformat=] Thanks but this was already fixed.

1 0

alsa-gobject: ctl: fulfill documentation for ALSACtl
by GitHub pull_request - opened 04 Jun '20

04 Jun '20

alsa-project/alsa-gobject pull request #22 was opened from takaswie: This patch fulfills alsactl documentation for GObject-derived objects and boxed objects. Request URL : https://github.com/alsa-project/alsa-gobject/pull/22 Patch URL : https://github.com/alsa-project/alsa-gobject/pull/22.patch Repository URL: https://github.com/alsa-project/alsa-gobject

1 0