May 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH v2 0/6] soundwire: intel: transition to 3 steps initialization
by Bard Liao 22 Jun '20

22 Jun '20

This series is to split the original "soundwire: intel: transition to 3 steps initialization" patch into different patches for better review. It also address comments from Vinod. Pierre-Louis Bossart (6): soundwire: intel: cleanups for indirections/logs soundwire: intel: clarify drvdata and remove more indirections soundwire: intel_init: remove useless test soundwire: intel_init: use devm_ allocation soundwire: intel_init: pass link information as platform data soundwire: intel: transition to 3 steps initialization drivers/soundwire/intel.c | 138 +++++++++-------- drivers/soundwire/intel.h | 13 ++ drivers/soundwire/intel_init.c | 261 ++++++++++++++++++++++++++------- 3 files changed, 295 insertions(+), 117 deletions(-) -- 2.17.1

2 7

[PATCH] soundwire: bus: clock_stop: don't deal with UNATTACHED Slave devices
by Bard Liao 22 Jun '20

22 Jun '20

We don't need to do anything for the slave if it is unattached during clock stop prepare and exit sequences. Signed-off-by: Bard Liao <yung-chuan.liao(a)linux.intel.com> --- drivers/soundwire/bus.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c index 2289c2ac8c5a..405335fb790a 100644 --- a/drivers/soundwire/bus.c +++ b/drivers/soundwire/bus.c @@ -863,13 +863,13 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus) if (!slave->dev_num) continue; - /* Identify if Slave(s) are available on Bus */ - is_slave = true; - if (slave->status != SDW_SLAVE_ATTACHED && slave->status != SDW_SLAVE_ALERT) continue; + /* Identify if Slave(s) are available on Bus */ + is_slave = true; + slave_mode = sdw_get_clk_stop_mode(slave); slave->curr_clk_stop_mode = slave_mode; @@ -900,6 +900,10 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus) return ret; } + /* Don't need to inform slaves if there is no slave attached */ + if (!is_slave) + return ret; + /* Inform slaves that prep is done */ list_for_each_entry(slave, &bus->slaves, node) { if (!slave->dev_num) @@ -985,13 +989,13 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus) if (!slave->dev_num) continue; - /* Identify if Slave(s) are available on Bus */ - is_slave = true; - if (slave->status != SDW_SLAVE_ATTACHED && slave->status != SDW_SLAVE_ALERT) continue; + /* Identify if Slave(s) are available on Bus */ + is_slave = true; + mode = slave->curr_clk_stop_mode; if (mode == SDW_CLK_STOP_MODE1) { @@ -1016,6 +1020,13 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus) if (is_slave && !simple_clk_stop) sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM); + /* + * Don't need to call slave callback function if there is no slave + * attached + */ + if (!is_slave) + return 0; + list_for_each_entry(slave, &bus->slaves, node) { if (!slave->dev_num) continue; -- 2.17.1

2 1

Lock-free dmix considered harmful
by Maarten Baert 20 Jun '20

20 Jun '20

I'm in the process of adding monitoring support to dmix (i.e. the ability for applications to capture the sound being played back through the speakers) - expect patches for this soon. However while reading the dmix source code I came across something weird. Dmix uses a lock-free mixing implementation based on (architecture-dependent) atomic operations such as atomic addition and compare-exchange. However at the same time dmix also uses a semaphore to prevent multiple processes from accessing the shared memory buffers simultaneously. This is redundant and makes the lock-free implementation rather pointless. Out of curiosity I decided to measure the time it takes to execute snd_pcm_dmix_sync_area for these three cases: - A simple locked implementation, which acquires the semaphore and then does mixing using the non-concurrent code from pcm_dmix_generic.c. - The current (redundant) implementation, which acquires the semaphore and then does atomic mixing. - A lock-free implementation, which does not acquire the semaphore and does atomic mixing. The resulting sound is identical in all three cases. (As a sanity check I also tested the 4th case, non-concurrent code without locking, which as expected produces audio with glitches.) I tested each case with 1, 4 and 20 simultaneous playback streams (multiple instances of 'aplay') on a system with 4 physical CPU cores (Intel Core i7-4770). You can see the results here: https://misc.maartenbaert.be/dmix_perf_locked_atomic.png The results are quite surprising: - The locked implementation is 3 to 6 times *faster* than the current redundant implementation. - The lock-free implementation is usually about as fast as the current redundant implementation, but has extreme outliers that are up to 3 times *slower* than the redundant implementation when there are multiple threads. It seems that the overhead of the atomic operations is so high that it completely negates the theoretical advantage of being able to mix from multiple threads simultaneously. This may be the result of 'false sharing' when multiple threads are accessing different words in the same cache line (which is almost impossible to avoid when mixing audio). On a related note, I believe that I have also found a bug in the lock-free implementation. The logic which is used to clear the 'sum' buffer is as follows: sample = *src; old_sample = *sum; if (ARCH_CMPXCHG(dst, 0, 1) == 0) sample -= old_sample; ARCH_ADD(sum, sample); This takes advantage of the fact that the hardware driver clears the playback buffer after reading it. However it does not account for the possibility that 'dst' might be zero for other reasons, such as: - An application plays back silence. - An application plays back sound, but then rewinds it. - Multiple applications play back sound which just happens to sum to zero occasionally. These all result in situations where 'dst' is changed from 0 to 1 by the compare-exchange operation, but then changed back to zero later, resulting in the classic 'ABA problem'. However this problem is currently hidden by the fact that the lock-free implementation is in fact still locked. Because of these reasons I think it would be better to drop the lock-free implementation entirely and just use the existing non-concurrent architecture-independent implementation from pcm_dmix_generic.c. Aside from being faster, it would also eliminate a lot of architecture-dependent code and inline assembly. Should I submit a patch for this? Best regards, Maarten Baert

3 5

[PATCH] ASoC: Intel: haswell: Power transition refactor
by Cezary Rojewski 20 Jun '20

20 Jun '20

Update D0 <-> D3 sequence to correctly transition hardware and DSP core from and to D3. On top of that, set SHIM registers to their recommended defaults during D0 and D3 proceduces as HW does not reset registers for us. Connected to: [alsa-devel][BUG] bdw-rt5650 DSP boot timeout https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html Github issue ticket reference: https://github.com/thesofproject/linux/pull/1842 Tested on: - BDW-Y RVP with rt286 - SAMUS with rt5677 Proposed solution (both in July 2019 and on github): 'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"' is NAKed as it only covers the problem up and actually brings back the undefined behavior: some registers (e.g.: APLLSE) are describing LPT offsets rather than WPT ones. In consequence, during power-transitions driver issues incorrect writes and leaves the regs of interest alone. Existing patch - the non-revert - does not resolve the HW D3 issue at all as it ignores the recommended sequence and does not initialize hardware registers as expected. And thus, leaving things as are is also unacceptable. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- sound/soc/intel/haswell/sst-haswell-dsp.c | 185 ++++++++++++---------- 1 file changed, 104 insertions(+), 81 deletions(-) diff --git a/sound/soc/intel/haswell/sst-haswell-dsp.c b/sound/soc/intel/haswell/sst-haswell-dsp.c index 88c3f63bded9..de80e19454c1 100644 --- a/sound/soc/intel/haswell/sst-haswell-dsp.c +++ b/sound/soc/intel/haswell/sst-haswell-dsp.c @@ -243,45 +243,92 @@ static irqreturn_t hsw_irq(int irq, void *context) return ret; } +#define CSR_DEFAULT_VALUE 0x8480040E +#define ISC_DEFAULT_VALUE 0x0 +#define ISD_DEFAULT_VALUE 0x0 +#define IMC_DEFAULT_VALUE 0x7FFF0003 +#define IMD_DEFAULT_VALUE 0x7FFF0003 +#define IPCC_DEFAULT_VALUE 0x0 +#define IPCD_DEFAULT_VALUE 0x0 +#define CLKCTL_DEFAULT_VALUE 0x7FF +#define CSR2_DEFAULT_VALUE 0x0 +#define LTR_CTRL_DEFAULT_VALUE 0x0 +#define HMD_CTRL_DEFAULT_VALUE 0x0 + +static void hsw_set_shim_defaults(struct sst_dsp *sst) +{ + sst_dsp_shim_write_unlocked(sst, SST_CSR, CSR_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_ISRX, ISC_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_ISRD, ISD_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IMRX, IMC_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IMRD, IMD_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IPCX, IPCC_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IPCD, IPCD_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_CLKCTL, CLKCTL_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_CSR2, CSR2_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_LTRC, LTR_CTRL_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_HMDC, HMD_CTRL_DEFAULT_VALUE); +} + +/* all clock-gating minus DCLCGE and DTCGE */ +#define SST_VDRTCL2_CG_OTHER 0xB7D + static void hsw_set_dsp_D3(struct sst_dsp *sst) { - u32 val; u32 reg; - /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ + /* disable clock core gating */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE); + reg &= ~(SST_VDRTCL2_DCLCGE); writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* enable power gating and switch off DRAM & IRAM blocks */ - val = readl(sst->addr.pci_cfg + SST_VDRTCTL0); - val |= SST_VDRTCL0_DSRAMPGE_MASK | - SST_VDRTCL0_ISRAMPGE_MASK; - val &= ~(SST_VDRTCL0_D3PGD | SST_VDRTCL0_D3SRAMPGD); - writel(val, sst->addr.pci_cfg + SST_VDRTCTL0); + /* stall, reset and set 24MHz XOSC */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, + SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST, + SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST); - /* switch off audio PLL */ - val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - val |= SST_VDRTCL2_APLLSE_MASK; - writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); + /* DRAM power gating all */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); + reg |= SST_VDRTCL0_ISRAMPGE_MASK | + SST_VDRTCL0_DSRAMPGE_MASK; + reg &= ~(SST_VDRTCL0_D3SRAMPGD); + reg |= SST_VDRTCL0_D3PGD; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + udelay(50); - /* disable MCLK(clkctl.smos = 0) */ - sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, - SST_CLKCTL_MASK, 0); + /* PLL shutdown enable */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_APLLSE_MASK; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* Set D3 state, delay 50 us */ - val = readl(sst->addr.pci_cfg + SST_PMCS); - val |= SST_PMCS_PS_MASK; - writel(val, sst->addr.pci_cfg + SST_PMCS); - udelay(50); + /* disable MCLK */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, + SST_CLKCTL_MASK, 0); - /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ + /* switch clock gating */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_CG_OTHER; + reg &= ~(SST_VDRTCL2_DTCGE); + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + /* enable DTCGE separatelly */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE; + reg |= SST_VDRTCL2_DTCGE; writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + /* set shim defaults */ + hsw_set_shim_defaults(sst); + + /* set D3 */ + reg = readl(sst->addr.pci_cfg + SST_PMCS); + reg |= SST_PMCS_PS_MASK; + writel(reg, sst->addr.pci_cfg + SST_PMCS); udelay(50); + /* enable clock core gating */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_DCLCGE; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + udelay(50); } static void hsw_reset(struct sst_dsp *sst) @@ -299,75 +346,62 @@ static void hsw_reset(struct sst_dsp *sst) SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL); } +/* recommended CSR state for power-up */ +#define SST_CSR_D0_MASK (0x18A09C0C | SST_CSR_DCS_MASK) + static int hsw_set_dsp_D0(struct sst_dsp *sst) { - int tries = 10; - u32 reg, fw_dump_bit; + u32 reg; - /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ + /* disable clock core gating */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE); + reg &= ~(SST_VDRTCL2_DCLCGE); writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* Disable D3PG (VDRTCTL0.D3PGD = 1) */ - reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); - reg |= SST_VDRTCL0_D3PGD; - writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + /* switch clock gating */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_CG_OTHER; + reg &= ~(SST_VDRTCL2_DTCGE); + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* Set D0 state */ + /* set D0 */ reg = readl(sst->addr.pci_cfg + SST_PMCS); - reg &= ~SST_PMCS_PS_MASK; + reg &= ~(SST_PMCS_PS_MASK); writel(reg, sst->addr.pci_cfg + SST_PMCS); - /* check that ADSP shim is enabled */ - while (tries--) { - reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK; - if (reg == 0) - goto finish; - - msleep(1); - } - - return -ENODEV; - -finish: - /* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */ - sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, - SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0); + /* DRAM power gating none */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); + reg &= ~(SST_VDRTCL0_ISRAMPGE_MASK | + SST_VDRTCL0_DSRAMPGE_MASK); + reg |= SST_VDRTCL0_D3SRAMPGD; + reg |= SST_VDRTCL0_D3PGD; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + mdelay(10); - /* stall DSP core, set clk to 192/96Mhz */ - sst_dsp_shim_update_bits_unlocked(sst, - SST_CSR, SST_CSR_STALL | SST_CSR_DCS_MASK, - SST_CSR_STALL | SST_CSR_DCS(4)); + /* set shim defaults */ + hsw_set_shim_defaults(sst); - /* Set 24MHz MCLK, prevent local clock gating, enable SSP0 clock */ + /* restore MCLK */ sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, - SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0, - SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0); + SST_CLKCTL_MASK, SST_CLKCTL_MASK); - /* Stall and reset core, set CSR */ - hsw_reset(sst); - - /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ + /* PLL shutdown disable */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE; + reg &= ~(SST_VDRTCL2_APLLSE_MASK); writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, + SST_CSR_D0_MASK, SST_CSR_SBCS0 | SST_CSR_SBCS1 | + SST_CSR_STALL | SST_CSR_DCS(4)); udelay(50); - /* switch on audio PLL */ + /* enable clock core gating */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg &= ~SST_VDRTCL2_APLLSE_MASK; + reg |= SST_VDRTCL2_DCLCGE; writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* set default power gating control, enable power gating control for all blocks. that is, - can't be accessed, please enable each block before accessing. */ - reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); - reg |= SST_VDRTCL0_DSRAMPGE_MASK | SST_VDRTCL0_ISRAMPGE_MASK; - /* for D0, always enable the block(DSRAM[0]) used for FW dump */ - fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT; - writel(reg & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0); - + /* clear reset */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_RST, 0); /* disable DMA finish function for SSP0 & SSP1 */ sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1, @@ -384,12 +418,6 @@ static int hsw_set_dsp_D0(struct sst_dsp *sst) sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY | SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0); - /* clear IPC registers */ - sst_dsp_shim_write(sst, SST_IPCX, 0x0); - sst_dsp_shim_write(sst, SST_IPCD, 0x0); - sst_dsp_shim_write(sst, 0x80, 0x6); - sst_dsp_shim_write(sst, 0xe0, 0x300a); - return 0; } @@ -415,11 +443,6 @@ static void hsw_sleep(struct sst_dsp *sst) { dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n"); - /* put DSP into reset and stall */ - sst_dsp_shim_update_bits(sst, SST_CSR, - SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL, - SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS); - hsw_set_dsp_D3(sst); dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n"); } -- 2.17.1

5 11

[v3] ASoC: AMD: Use mixer control to switch between DMICs
by Akshu Agrawal 16 Jun '20

16 Jun '20

Having mixer control to switch between DMICs prevents user to initiate capture simultaneously on both the DMIcs. Earlier 2 separate devices, one for each DMIC, gave an option of using them simultaneously, which is not supported. Signed-off-by: Akshu Agrawal <akshu.agrawal(a)amd.com> --- v2: Modified "Front Mic" to "DMIC Switch" v3: Changed to using of Mux sound/soc/amd/acp3x-rt5682-max9836.c | 58 +++++++++++++++------------- 1 file changed, 31 insertions(+), 27 deletions(-) diff --git a/sound/soc/amd/acp3x-rt5682-max9836.c b/sound/soc/amd/acp3x-rt5682-max9836.c index e499c00e0c66..f745b42dfd23 100644 --- a/sound/soc/amd/acp3x-rt5682-max9836.c +++ b/sound/soc/amd/acp3x-rt5682-max9836.c @@ -188,25 +188,27 @@ static int acp3x_ec_dmic0_startup(struct snd_pcm_substream *substream) machine->cap_i2s_instance = I2S_BT_INSTANCE; snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 0); return rt5682_clk_enable(substream); } -static int acp3x_ec_dmic1_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_card *card = rtd->card; - struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0); - struct acp3x_platform_info *machine = snd_soc_card_get_drvdata(card); +static int dmic_switch; - machine->cap_i2s_instance = I2S_BT_INSTANCE; - snd_soc_dai_set_bclk_ratio(codec_dai, 64); - if (dmic_sel) - gpiod_set_value(dmic_sel, 1); +static int dmic_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + ucontrol->value.integer.value[0] = dmic_switch; + return 0; +} - return rt5682_clk_enable(substream); +static int dmic_set(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + if (dmic_sel) { + dmic_switch = ucontrol->value.integer.value[0]; + gpiod_set_value(dmic_sel, dmic_switch); + } + return 0; } static void rt5682_shutdown(struct snd_pcm_substream *substream) @@ -229,11 +231,6 @@ static const struct snd_soc_ops acp3x_ec_cap0_ops = { .shutdown = rt5682_shutdown, }; -static const struct snd_soc_ops acp3x_ec_cap1_ops = { - .startup = acp3x_ec_dmic1_startup, - .shutdown = rt5682_shutdown, -}; - SND_SOC_DAILINK_DEF(acp3x_i2s, DAILINK_COMP_ARRAY(COMP_CPU("acp3x_i2s_playcap.0"))); SND_SOC_DAILINK_DEF(acp3x_bt, @@ -279,21 +276,26 @@ static struct snd_soc_dai_link acp3x_dai_5682_98357[] = { .ops = &acp3x_ec_cap0_ops, SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), }, - { - .name = "acp3x-ec-dmic1-capture", - .stream_name = "Capture DMIC1", - .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF - | SND_SOC_DAIFMT_CBS_CFS, - .dpcm_capture = 1, - .ops = &acp3x_ec_cap1_ops, - SND_SOC_DAILINK_REG(acp3x_bt, cros_ec, platform), - }, }; +static const char * const dmic_mux_text[] = { + "Front Mic", + "Rear Mic", +}; + +static SOC_ENUM_SINGLE_DECL( + acp3x_dmic_enum, SND_SOC_NOPM, 0, dmic_mux_text); + +static const struct snd_kcontrol_new acp3x_dmic_mux_control = + SOC_DAPM_ENUM_EXT("DMIC Select Mux", acp3x_dmic_enum, + dmic_get, dmic_set); + static const struct snd_soc_dapm_widget acp3x_widgets[] = { SND_SOC_DAPM_HP("Headphone Jack", NULL), SND_SOC_DAPM_SPK("Spk", NULL), SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MUX("Dmic Mux", SND_SOC_NOPM, 0, 0, + &acp3x_dmic_mux_control), }; static const struct snd_soc_dapm_route acp3x_audio_route[] = { @@ -301,6 +303,8 @@ static const struct snd_soc_dapm_route acp3x_audio_route[] = { {"Headphone Jack", NULL, "HPOR"}, {"IN1P", NULL, "Headset Mic"}, {"Spk", NULL, "Speaker"}, + {"Dmic Mux", "Front Mic", "DMIC"}, + {"Dmic Mux", "Rear Mic", "DMIC"}, }; static const struct snd_kcontrol_new acp3x_mc_controls[] = { -- 2.20.1

2 1

Cannot get Lenovo P520/Realtek ALC662 (rev 3) to produce sound
by Jan Pokorny 14 Jun '20

14 Jun '20

Hello list, this time within wider circle (and with more experience so far). I am seeking for help with shiny new Lenovo P520 machine that only lacks one thing for me to be entirely happy it. I believe this is relatively a new batch -- intentionally mentioning it since the topic of this very machine appears to be a settled case already: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… With newest BIOS, running the most recent kernel from Fedora Rawhide (but I did try 5.5.10 kernel from Fedora 30 as well), booted via UEFI (incl. secure boot), the only way to get it to produce any sound whatsoever is to manually load snd-pcsp [*1]. With that done, virtual terminal starts to beep as expected (as in printf '\a'), I am able to run "beep" program, and even "aplay -D hw:pcsp /usr/share/sound/alsa/*.wav" is producing the respective sounds, despite suffering from surrounding noise[*]. That validates that basic function of the built-in speaker works just fine (and previously, it was validated under Windows that it worked just fine). As the linked commit indicates, the proper model parameter to snd-hda-audio module is dual-codecs. I've tried that, and a handful of other models, to no avail. I considered the possibility the problem is just that I cannot work with "mute" state properly, so tried everything I could (incl. alsaunmute), again, without any change. Next dimension to the matrix was attaching external speaker to the front connector. Nothing has helped. Comparing outputs from alsa-info.sh for both states, "no model specified" and "dual-codecs" specified, there was no observable change other than this sole "model" parameter not/being (null). I am not sure whether this means this particular predefined quirk was applied properly, or the same observation is to be expected in general. Note that said quirk is, IIUIC, normally hooked onto the presence of "Subsystem: Lenovo Device 1036" (as in from lspci), and it is what this machine assuredly satisfies. I am attaching the output from the plain/default case, and looking forward to being able to move at least a bit with this. I'd be fine, for the time being, to use the sketched "PC speaker" workaround, if only it wasn't spoiled with so much noise/hum (no audio connector was used at that time). But that won't solve the urging general teleconferencing problem of these days, apparently. [*1] at a matter of fact, even it should play no role here, there was a change between this 5.7.0.rc7 kernel and the other tested, 5.5.10, in that the respective (another, IIRC) module got loaded automatically in the latter/older, whereas it needed to be loaded manually with the former/newer [*2] perhaps resembled https://bugzilla.redhat.com/show_bug.cgi?id=1660581 that I found when trying to do an extensive search around similar problems Thanks -- Jan

3 6

[alsa-devel] [PATCH 0/2 v4] ALSA: pcm: anonymous dup implementation
by Jaroslav Kysela 12 Jun '20

12 Jun '20

This patchset contains the anonymous dup implementation with permissions checking for the ALSA's PCM interface in kernel to enable the restricted DMA sound buffer sharing for the restricted tasks. The code was tested through qemu and it seems to be pretty stable. The initial tinyalsa implementation can be found here: https://github.com/perexg/tinyalsa/commits/anondup v2 of the patches: - change clone parameter to subdevice number for the pcm attach - change SNDRV_PCM_PERM_MAX to SNDRV_PCM_PERM_MASK - the tinyalsa implementation was a little updated (restructured) v3 of the patches: - group integer declarations in snd_pcm_anonymous_dup() - replaced substream->pcm with pcm in snd_pcm_anonymous_dup() - added SNDRV_PCM_PERM_RW check for read/write/readv/writev syscalls v4 of the patches: - more simple restriction control (only two modes - full/buffer) - the tinyalsa implementation follows this change Cc: Phil Burk <philburk(a)google.com> Cc: Zach Riggle <riggle(a)google.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Leo Yan <leo.yan(a)linaro.org> Cc: Baolin Wang <baolin.wang(a)linaro.org> Jaroslav Kysela (2): ALSA: pcm: implement the anonymous dup (inode file descriptor) ALSA: pcm: implement the mmap buffer mode for the anonymous dup include/sound/pcm.h | 10 +++-- include/uapi/sound/asound.h | 6 ++- sound/core/oss/pcm_oss.c | 2 +- sound/core/pcm.c | 13 +++--- sound/core/pcm_compat.c | 1 + sound/core/pcm_native.c | 97 ++++++++++++++++++++++++++++++++++++++++++--- 6 files changed, 110 insertions(+), 19 deletions(-) -- 2.13.6

4 17

next-0519 on thinkpad x60: sound related? window manager crash
by Pavel Machek 11 Jun '20

11 Jun '20

Hi! My window manager stopped responding. I was able to recover machine using sysrq-k. I started writing nice report, when session failed second time. And then third time on next attempt. Any ideas? I'll send this out before this locks up... Best regards, Pavel [ 2801.147411] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2801.187449] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2801.192260] usb 1-2: new high-speed USB device number 5 using ehci-pci [ 2801.240241] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2801.300663] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it. [ 2801.352181] usb 1-2: New USB device found, idVendor=0525, idProduct=a4a1, bcdDevice= 5.07 [ 2801.352192] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2801.352200] usb 1-2: Product: Ethernet Gadget [ 2801.352207] usb 1-2: Manufacturer: Linux 5.7.0-rc4-00046-g6d7c0f75a522 with musb-hdrc [ 2801.419872] e1000e 0000:02:00.0 eth1: NIC Link is Down [ 2801.428760] cdc_ether 1-2:1.0 usb0: register 'cdc_ether' at usb-0000:00:1d.7-2, CDC Ethernet Device, 72:ed:12:23:c9:c2 [ 2804.020289] wlan0: authenticate with 5c:f4:ab:10:d2:bb [ 2804.020451] wlan0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) [ 2804.022385] wlan0: authenticated [ 2804.024243] wlan0: associate with 5c:f4:ab:10:d2:bb (try 1/3) [ 2804.026985] wlan0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=2) [ 2804.028961] wlan0: associated [ 2874.520955] perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750 [ 3730.016148] perf: interrupt took too long (3135 > 3133), lowering kernel.perf_event_max_sample_rate to 63750 [ 4274.984810] BUG: unable to handle page fault for address: f8600000 [ 4274.984821] #PF: supervisor write access in kernel mode [ 4274.984827] #PF: error_code(0x0002) - not-present page [ 4274.984833] *pdpt = 000000002c0b2001 *pde = 0000000000000000 [ 4274.984843] Oops: 0002 [#1] PREEMPT SMP PTI [ 4274.984853] CPU: 1 PID: 3351 Comm: marco Not tainted 5.7.0-rc6-next-20200519+ #115 [ 4274.984859] Hardware name: LENOVO 17097HU/17097HU, BIOS 7BETD8WW (2.19 ) 03/31/2011 [ 4274.984871] EIP: memset+0xb/0x20 [ 4274.984878] Code: f9 01 72 0b 8a 0e 88 0f 8d b4 26 00 00 00 00 8b 45 f0 83 c4 04 5b 5e 5f 5d c3 8d 74 26 00 90 55 89 e5 57 89 c7 53 89 c3 89 d0 <f3> aa 89 d8 5b 5f 5d c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 89 [ 4274.984885] EAX: 00000000 EBX: f85fe000 ECX: 0001e000 EDX: 00000000 [ 4274.984892] ESI: ed158400 EDI: f8600000 EBP: edcc9e6c ESP: edcc9e64 [ 4274.984898] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210246 [ 4274.984905] CR0: 80050033 CR2: f8600000 CR3: 2c114000 CR4: 000006b0 [ 4274.984910] Call Trace: [ 4274.984923] snd_pcm_hw_params+0x38d/0x400 [ 4274.984930] snd_pcm_ioctl+0x187/0xe80 [ 4274.984940] ? __fget_files+0x86/0xc0 [ 4274.984947] ? __fget_light+0x6b/0x80 [ 4274.984954] ? snd_pcm_status_user64+0x90/0x90 [ 4274.984962] ksys_ioctl+0x1cd/0x880 [ 4274.984971] ? ksys_mmap_pgoff+0x81/0xc0 [ 4274.984978] ? fput+0xd/0x10 [ 4274.984984] ? ksys_mmap_pgoff+0x8d/0xc0 [ 4274.984991] __ia32_sys_ioctl+0x10/0x12 [ 4274.985000] do_int80_syscall_32+0x3c/0x100 [ 4274.985010] entry_INT80_32+0x116/0x116 [ 4274.985016] EIP: 0xb7f17092 [ 4274.985023] Code: 00 00 00 e9 90 ff ff ff ff a3 24 00 00 00 68 30 00 00 00 e9 80 ff ff ff ff a3 e8 ff ff ff 66 90 00 00 00 00 00 00 00 00 cd 80 <c3> 8d b4 26 00 00 00 00 8d b6 00 00 00 00 8b 1c 24 c3 8d b4 26 00 [ 4274.985030] EAX: ffffffda EBX: 00000011 ECX: c25c4111 EDX: bf8d5280 [ 4274.985036] ESI: 08250880 EDI: bf8d5280 EBP: 082a4150 ESP: bf8d50a4 [ 4274.985042] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00200292 [ 4274.985051] ? nmi+0xcc/0x2bc [ 4274.985055] Modules linked in: [ 4274.985063] CR2: 00000000f8600000 [ 4274.985072] ---[ end trace 61b0852711d6de1d ]--- [ 4274.985079] EIP: memset+0xb/0x20 [ 4274.985086] Code: f9 01 72 0b 8a 0e 88 0f 8d b4 26 00 00 00 00 8b 45 f0 83 c4 04 5b 5e 5f 5d c3 8d 74 26 00 90 55 89 e5 57 89 c7 53 89 c3 89 d0 <f3> aa 89 d8 5b 5f 5d c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 89 [ 4274.985092] EAX: 00000000 EBX: f85fe000 ECX: 0001e000 EDX: 00000000 [ 4274.985099] ESI: ed158400 EDI: f8600000 EBP: edcc9e6c ESP: edcc9e64 [ 4274.985105] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00210246 [ 4274.985112] CR0: 80050033 CR2: f8600000 CR3: 2c114000 CR4: 000006b0 [ 4337.396551] sysrq: SAK [ 4337.397010] tty tty7: SAK: killed process 2963 (Xorg): by session [ 4337.397282] tty tty7: SAK: killed process 2963 (Xorg): by controlling tty [ 4337.397621] tty tty7: SAK: killed process 3484 (console-kit-dae): by fd#9 [ 4337.397934] tty tty7: SAK: killed process 3485 (console-kit-dae): by fd#9 [ 4337.397940] tty tty7: SAK: killed process 3486 (console-kit-dae): by fd#9 [ 4337.397945] tty tty7: SAK: killed process 3487 (console-kit-dae): by fd#9 [ 4337.397951] tty tty7: SAK: killed process 3488 (console-kit-dae): by fd#9 [ 4337.397956] tty tty7: SAK: killed process 3489 (console-kit-dae): by fd#9 [ 4337.397961] tty tty7: SAK: killed process 3490 (console-kit-dae): by fd#9 [ 4337.397967] tty tty7: SAK: killed process 3491 (console-kit-dae): by fd#9 [ 4337.397972] tty tty7: SAK: killed process 3492 (console-kit-dae): by fd#9 [ 4337.397978] tty tty7: SAK: killed process 3493 (console-kit-dae): by fd#9 [ 4337.397983] tty tty7: SAK: killed process 3494 (console-kit-dae): by fd#9 [ 4337.397989] tty tty7: SAK: killed process 3495 (console-kit-dae): by fd#9 [ 4337.397994] tty tty7: SAK: killed process 3496 (console-kit-dae): by fd#9 [ 4337.397999] tty tty7: SAK: killed process 3497 (console-kit-dae): by fd#9 [ 4337.398005] tty tty7: SAK: killed process 3498 (console-kit-dae): by fd#9 [ 4337.398010] tty tty7: SAK: killed process 3499 (console-kit-dae): by fd#9 [ 4337.398015] tty tty7: SAK: killed process 3500 (console-kit-dae): by fd#9 [ 4337.398021] tty tty7: SAK: killed process 3501 (console-kit-dae): by fd#9 [ 4337.398026] tty tty7: SAK: killed process 3502 (console-kit-dae): by fd#9 [ 4337.398032] tty tty7: SAK: killed process 3503 (console-kit-dae): by fd#9 [ 4337.398037] tty tty7: SAK: killed process 3504 (console-kit-dae): by fd#9 [ 4337.398042] tty tty7: SAK: killed process 3505 (console-kit-dae): by fd#9 [ 4337.398048] tty tty7: SAK: killed process 3506 (console-kit-dae): by fd#9 [ 4337.398053] tty tty7: SAK: killed process 3507 (console-kit-dae): by fd#9 [ 4337.398059] tty tty7: SAK: killed process 3508 (console-kit-dae): by fd#9 [ 4337.398064] tty tty7: SAK: killed process 3509 (console-kit-dae): by fd#9 [ 4337.398070] tty tty7: SAK: killed process 3510 (console-kit-dae): by fd#9 [ 4337.398075] tty tty7: SAK: killed process 3511 (console-kit-dae): by fd#9 [ 4337.398080] tty tty7: SAK: killed process 3512 (console-kit-dae): by fd#9 [ 4337.398086] tty tty7: SAK: killed process 3513 (console-kit-dae): by fd#9 [ 4337.398091] tty tty7: SAK: killed process 3514 (console-kit-dae): by fd#9 [ 4337.398097] tty tty7: SAK: killed process 3515 (console-kit-dae): by fd#9 [ 4337.398102] tty tty7: SAK: killed process 3516 (console-kit-dae): by fd#9 [ 4337.398107] tty tty7: SAK: killed process 3517 (console-kit-dae): by fd#9 [ 4337.398113] tty tty7: SAK: killed process 3518 (console-kit-dae): by fd#9 [ 4337.398118] tty tty7: SAK: killed process 3519 (console-kit-dae): by fd#9 [ 4337.398124] tty tty7: SAK: killed process 3520 (console-kit-dae): by fd#9 [ 4337.398129] tty tty7: SAK: killed process 3521 (console-kit-dae): by fd#9 [ 4337.398135] tty tty7: SAK: killed process 3522 (console-kit-dae): by fd#9 [ 4337.398141] tty tty7: SAK: killed process 3523 (console-kit-dae): by fd#9 [ 4337.398146] tty tty7: SAK: killed process 3524 (console-kit-dae): by fd#9 [ 4337.398151] tty tty7: SAK: killed process 3525 (console-kit-dae): by fd#9 [ 4337.398157] tty tty7: SAK: killed process 3526 (console-kit-dae): by fd#9 [ 4337.398162] tty tty7: SAK: killed process 3527 (console-kit-dae): by fd#9 [ 4337.398168] tty tty7: SAK: killed process 3528 (console-kit-dae): by fd#9 [ 4337.398173] tty tty7: SAK: killed process 3529 (console-kit-dae): by fd#9 [ 4337.398178] tty tty7: SAK: killed process 3530 (console-kit-dae): by fd#9 [ 4337.398184] tty tty7: SAK: killed process 3531 (console-kit-dae): by fd#9 [ 4337.398189] tty tty7: SAK: killed process 3532 (console-kit-dae): by fd#9 [ 4337.398194] tty tty7: SAK: killed process 3533 (console-kit-dae): by fd#9 [ 4337.398200] tty tty7: SAK: killed process 3534 (console-kit-dae): by fd#9 [ 4337.398205] tty tty7: SAK: killed process 3535 (console-kit-dae): by fd#9 [ 4337.398210] tty tty7: SAK: killed process 3536 (console-kit-dae): by fd#9 [ 4337.398216] tty tty7: SAK: killed process 3537 (console-kit-dae): by fd#9 [ 4337.398221] tty tty7: SAK: killed process 3538 (console-kit-dae): by fd#9 [ 4337.398227] tty tty7: SAK: killed process 3539 (console-kit-dae): by fd#9 [ 4337.398232] tty tty7: SAK: killed process 3540 (console-kit-dae): by fd#9 [ 4337.398237] tty tty7: SAK: killed process 3541 (console-kit-dae): by fd#9 [ 4337.398243] tty tty7: SAK: killed process 3542 (console-kit-dae): by fd#9 [ 4337.398248] tty tty7: SAK: killed process 3543 (console-kit-dae): by fd#9 [ 4337.398253] tty tty7: SAK: killed process 3544 (console-kit-dae): by fd#9 [ 4337.398260] tty tty7: SAK: killed process 3545 (console-kit-dae): by fd#9 [ 4337.398265] tty tty7: SAK: killed process 3546 (console-kit-dae): by fd#9 [ 4337.398270] tty tty7: SAK: killed process 3548 (gmain): by fd#9 [ 4337.398276] tty tty7: SAK: killed process 3549 (gdbus): by fd#9 [ 4337.743402] wlan0: deauthenticating from 5c:f4:ab:10:d2:bb by local choice (Reason: 3=DEAUTH_LEAVING) [ 4349.750345] traps: clock-applet[7160] trap int3 ip:b71bafc0 sp:bffdd3b0 error:0 in libglib-2.0.so.0.5000.3[b716e000+12a000] [ 4349.751834] traps: mateweather-app[7164] trap int3 ip:b729ffc0 sp:bfc45bf0 error:0 in libglib-2.0.so.0.5000.3[b7253000+12a000] [ 4352.181317] wlan0: authenticate with 5c:f4:ab:10:d2:bb [ 4352.183330] wlan0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) [ 4352.187927] wlan0: authenticated [ 4352.192203] wlan0: associate with 5c:f4:ab:10:d2:bb (try 1/3) [ 4352.194932] wlan0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=2) [ 4352.199395] wlan0: associated [ 4688.523006] sysrq: SAK [ 4688.523318] tty tty7: SAK: killed process 6791 (Xorg): by session [ 4688.523683] tty tty7: SAK: killed process 6791 (Xorg): by controlling tty [ 4688.523930] tty tty7: SAK: killed process 7017 (console-kit-dae): by fd#9 [ 4688.524330] tty tty7: SAK: killed process 7018 (console-kit-dae): by fd#9 [ 4688.524337] tty tty7: SAK: killed process 7019 (console-kit-dae): by fd#9 [ 4688.524342] tty tty7: SAK: killed process 7020 (console-kit-dae): by fd#9 [ 4688.524347] tty tty7: SAK: killed process 7021 (console-kit-dae): by fd#9 [ 4688.524353] tty tty7: SAK: killed process 7022 (console-kit-dae): by fd#9 [ 4688.524358] tty tty7: SAK: killed process 7023 (console-kit-dae): by fd#9 [ 4688.524363] tty tty7: SAK: killed process 7024 (console-kit-dae): by fd#9 [ 4688.524369] tty tty7: SAK: killed process 7025 (console-kit-dae): by fd#9 [ 4688.524374] tty tty7: SAK: killed process 7026 (console-kit-dae): by fd#9 [ 4688.524380] tty tty7: SAK: killed process 7027 (console-kit-dae): by fd#9 [ 4688.524385] tty tty7: SAK: killed process 7028 (console-kit-dae): by fd#9 [ 4688.524391] tty tty7: SAK: killed process 7029 (console-kit-dae): by fd#9 [ 4688.524396] tty tty7: SAK: killed process 7030 (console-kit-dae): by fd#9 [ 4688.524402] tty tty7: SAK: killed process 7031 (console-kit-dae): by fd#9 [ 4688.524407] tty tty7: SAK: killed process 7032 (console-kit-dae): by fd#9 [ 4688.524412] tty tty7: SAK: killed process 7033 (console-kit-dae): by fd#9 [ 4688.524419] tty tty7: SAK: killed process 7034 (console-kit-dae): by fd#9 [ 4688.524424] tty tty7: SAK: killed process 7035 (console-kit-dae): by fd#9 [ 4688.524429] tty tty7: SAK: killed process 7036 (console-kit-dae): by fd#9 [ 4688.524435] tty tty7: SAK: killed process 7037 (console-kit-dae): by fd#9 [ 4688.524440] tty tty7: SAK: killed process 7038 (console-kit-dae): by fd#9 [ 4688.524446] tty tty7: SAK: killed process 7039 (console-kit-dae): by fd#9 [ 4688.524451] tty tty7: SAK: killed process 7040 (console-kit-dae): by fd#9 [ 4688.524456] tty tty7: SAK: killed process 7041 (console-kit-dae): by fd#9 [ 4688.524462] tty tty7: SAK: killed process 7042 (console-kit-dae): by fd#9 [ 4688.524467] tty tty7: SAK: killed process 7043 (console-kit-dae): by fd#9 [ 4688.524473] tty tty7: SAK: killed process 7044 (console-kit-dae): by fd#9 [ 4688.524478] tty tty7: SAK: killed process 7045 (console-kit-dae): by fd#9 [ 4688.524483] tty tty7: SAK: killed process 7046 (console-kit-dae): by fd#9 [ 4688.524489] tty tty7: SAK: killed process 7047 (console-kit-dae): by fd#9 [ 4688.524494] tty tty7: SAK: killed process 7048 (console-kit-dae): by fd#9 [ 4688.524500] tty tty7: SAK: killed process 7049 (console-kit-dae): by fd#9 [ 4688.524505] tty tty7: SAK: killed process 7050 (console-kit-dae): by fd#9 [ 4688.524511] tty tty7: SAK: killed process 7051 (console-kit-dae): by fd#9 [ 4688.524516] tty tty7: SAK: killed process 7052 (console-kit-dae): by fd#9 [ 4688.524521] tty tty7: SAK: killed process 7053 (console-kit-dae): by fd#9 [ 4688.524527] tty tty7: SAK: killed process 7054 (console-kit-dae): by fd#9 [ 4688.524532] tty tty7: SAK: killed process 7055 (console-kit-dae): by fd#9 [ 4688.524538] tty tty7: SAK: killed process 7056 (console-kit-dae): by fd#9 [ 4688.524543] tty tty7: SAK: killed process 7057 (console-kit-dae): by fd#9 [ 4688.524549] tty tty7: SAK: killed process 7058 (console-kit-dae): by fd#9 [ 4688.524554] tty tty7: SAK: killed process 7059 (console-kit-dae): by fd#9 [ 4688.524560] tty tty7: SAK: killed process 7060 (console-kit-dae): by fd#9 [ 4688.524565] tty tty7: SAK: killed process 7061 (console-kit-dae): by fd#9 [ 4688.524570] tty tty7: SAK: killed process 7062 (console-kit-dae): by fd#9 [ 4688.524576] tty tty7: SAK: killed process 7063 (console-kit-dae): by fd#9 [ 4688.524581] tty tty7: SAK: killed process 7064 (console-kit-dae): by fd#9 [ 4688.524587] tty tty7: SAK: killed process 7065 (console-kit-dae): by fd#9 [ 4688.524593] tty tty7: SAK: killed process 7066 (console-kit-dae): by fd#9 [ 4688.524598] tty tty7: SAK: killed process 7067 (console-kit-dae): by fd#9 [ 4688.524603] tty tty7: SAK: killed process 7068 (console-kit-dae): by fd#9 [ 4688.524609] tty tty7: SAK: killed process 7069 (console-kit-dae): by fd#9 [ 4688.524614] tty tty7: SAK: killed process 7070 (console-kit-dae): by fd#9 [ 4688.524620] tty tty7: SAK: killed process 7071 (console-kit-dae): by fd#9 [ 4688.524625] tty tty7: SAK: killed process 7072 (console-kit-dae): by fd#9 [ 4688.524631] tty tty7: SAK: killed process 7073 (console-kit-dae): by fd#9 [ 4688.524636] tty tty7: SAK: killed process 7074 (console-kit-dae): by fd#9 [ 4688.524642] tty tty7: SAK: killed process 7075 (console-kit-dae): by fd#9 [ 4688.524648] tty tty7: SAK: killed process 7076 (console-kit-dae): by fd#9 [ 4688.524653] tty tty7: SAK: killed process 7077 (console-kit-dae): by fd#9 [ 4688.524659] tty tty7: SAK: killed process 7078 (console-kit-dae): by fd#9 [ 4688.524664] tty tty7: SAK: killed process 7079 (console-kit-dae): by fd#9 [ 4688.524670] tty tty7: SAK: killed process 7083 (gmain): by fd#9 [ 4688.524675] tty tty7: SAK: killed process 7085 (gdbus): by fd#9 [ 4688.780517] wlan0: deauthenticating from 5c:f4:ab:10:d2:bb by local choice (Reason: 3=DEAUTH_LEAVING) [ 4698.601308] traps: clock-applet[7813] trap int3 ip:b71e9fc0 sp:bf901050 error:0 in libglib-2.0.so.0.5000.3[b719d000+12a000] [ 4698.676549] traps: mateweather-app[7814] trap int3 ip:b7260fc0 sp:bfcfb9d0 error:0 in libglib-2.0.so.0.5000.3[b7214000+12a000] [ 4700.456620] wlan0: authenticate with 5c:f4:ab:10:d2:bb [ 4700.456710] wlan0: send auth to 5c:f4:ab:10:d2:bb (try 1/3) [ 4700.459606] wlan0: authenticated [ 4700.460449] wlan0: associate with 5c:f4:ab:10:d2:bb (try 1/3) [ 4700.463153] wlan0: RX AssocResp from 5c:f4:ab:10:d2:bb (capab=0x411 status=0 aid=2) [ 4700.465007] wlan0: associated -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

6 30

[PATCH v2 0/3] ASoC: ti: Add support for audio on J721e EVM
by Peter Ujfalusi 11 Jun '20

11 Jun '20

Hi, Changes since v1: - Fixed DT binding documentation errors - Rebased on ASoC head and updated the driver to compile and work This series adds support for the analog audio setup on the j721e EVM. The audio setup of the EVM is: Common Processor Board (CPB): McASP10 <-> pcm3168a Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a Both CPB and IVI wired in parallel serializer setup. The first patch adds the stream_name for McASP driver as it is needed in multicodec (and would be needed in DPCM) setup for proper DAPM handling. The second patch adds two DT schema, one for the cpb and one for the cpb+ivi card. Regards, Peter --- Peter Ujfalusi (3): ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture bindings: sound: Add documentation for TI j721e EVM (CPB and IVI) ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI) .../bindings/sound/ti,j721e-cpb-audio.yaml | 93 ++ .../sound/ti,j721e-cpb-ivi-audio.yaml | 142 +++ sound/soc/ti/Kconfig | 8 + sound/soc/ti/Makefile | 2 + sound/soc/ti/davinci-mcasp.c | 3 + sound/soc/ti/j721e-evm.c | 867 ++++++++++++++++++ 6 files changed, 1115 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml create mode 100644 sound/soc/ti/j721e-evm.c -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

2 8

[PATCH 0/2] alsa-lib: -ENODATA documentation
by Kai Vehmanen 05 Jun '20

05 Jun '20

Hello all, here's patch to document -ENODATA error as a PCM error code. We have recently merged patches to SOF firmware to use this error code: https://github.com/thesofproject/sof/pull/2918 Some additional background on the use-case: https://github.com/thesofproject/sof/issues/2564 In thread "Functionality of pcm_notify in snd-aloop?" https://mailman.alsa-project.org/pipermail/alsa-devel/2020-April/166974.html .. we discussed the possibility for ALSA to provide a mechanism for application to wait for the condition to change, but at least for the currently known usages, the synchronization responsibility will be in user-space (UCM file will describe the PCM dependencies). Anyways, this is orthogonal to documenting -ENODATA, so sending this now. Kai Vehmanen (2): pcm: add documentation for -ENODATA error code pcm: fix spelling in documentation for -EBADFD src/pcm/pcm.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) -- 2.26.2

2 3