April 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/3] soundwire: bus_type: add sdw_master_device support
by Bard Liao 13 May '20

13 May '20

This series adds sdw master devices support. Pierre-Louis Bossart (3): soundwire: bus: rename sdw_bus_master_add/delete, add arguments soundwire: bus_type: introduce sdw_slave_type and sdw_master_type soundwire: bus_type: add sdw_master_device support .../driver-api/soundwire/summary.rst | 7 +- drivers/soundwire/Makefile | 2 +- drivers/soundwire/bus.c | 27 ++++--- drivers/soundwire/bus.h | 3 + drivers/soundwire/bus_type.c | 19 +++-- drivers/soundwire/intel.c | 9 ++- drivers/soundwire/master.c | 79 +++++++++++++++++++ drivers/soundwire/qcom.c | 7 +- drivers/soundwire/slave.c | 8 +- include/linux/soundwire/sdw.h | 22 +++++- include/linux/soundwire/sdw_type.h | 9 ++- 11 files changed, 160 insertions(+), 32 deletions(-) create mode 100644 drivers/soundwire/master.c -- 2.17.1

4 15

[alsa-devel] [PATCH] sound/soc: only first codec is master in multicodec setup
by Johannes Krude 11 May '20

11 May '20

When using multiple codecs, at most one codec should generate the master clock. All codecs except the first are therefore configured for slave mode. Before this patch all codecs in a multicodec setup had to be slaves. This is needed when e.g., connecting multiple sound hats for simultaneous playback to the raspberry pi I2S output and one of the sound hats generates the I2S clocks (https://github.com/raspberrypi/linux/pull/3337). I checked the raspberry pi kernel tree for multicodec usage with `fgrep num_codecs -R sound/soc/` and verified that all existing multicodec drivers with hardcoded format have indeed configured all codecs for slave mode. Doing a similar check on the current for-5.5 tree is more difficult since .num_codecs is now hidden behind a preprocessor macro. Signed-off-by: Johannes Krude <johannes(a)krude.de> --- sound/soc/soc-core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 058e038df..cb8952527 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1688,6 +1688,14 @@ int snd_soc_runtime_set_dai_fmt(struct snd_soc_pcm_runtime *rtd, for_each_rtd_codec_dai(rtd, i, codec_dai) { + unsigned int codec_dai_fmt = dai_fmt; + - ret = snd_soc_dai_set_fmt(codec_dai, dai_fmt); + // there can only be one master when using multiple codecs + if (i && (codec_dai_fmt & SND_SOC_DAIFMT_MASTER_MASK)) { + codec_dai_fmt &= ~SND_SOC_DAIFMT_MASTER_MASK; + codec_dai_fmt |= SND_SOC_DAIFMT_CBS_CFS; + } + + ret = snd_soc_dai_set_fmt(codec_dai, codec_dai_fmt); if (ret != 0 && ret != -ENOTSUPP) { dev_warn(codec_dai->dev, "ASoC: Failed to set DAI format: %d\n", ret); -- 2.17.1

2 2

[PATCH] ASoC: core: Make sure component driver names are unique
by Ranjani Sridharan 11 May '20

11 May '20

When registering a component, make sure that the driver names are unique. This will ensure that the snd_soc_rtdcom_lookup() function returns the right component based on the name. Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> --- sound/soc/soc-core.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8321e75ff244..00c1f8ce46af 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -286,14 +286,6 @@ struct snd_soc_component *snd_soc_rtdcom_lookup(struct snd_soc_pcm_runtime *rtd, if (!driver_name) return NULL; - /* - * NOTE - * - * snd_soc_rtdcom_lookup() will find component from rtd by using - * specified driver name. - * But, if many components which have same driver name are connected - * to 1 rtd, this function will return 1st found component. - */ for_each_rtd_components(rtd, i, component) { const char *component_name = component->driver->name; @@ -2640,6 +2632,22 @@ int snd_soc_add_component(struct device *dev, } EXPORT_SYMBOL_GPL(snd_soc_add_component); +static bool +snd_soc_component_driver_name_is_unique(const struct snd_soc_component_driver *component_driver) +{ + struct snd_soc_component *component; + + mutex_lock(&client_mutex); + for_each_component(component) + if (!strcmp(component->driver->name, component_driver->name)) { + mutex_unlock(&client_mutex); + return false; + } + + mutex_unlock(&client_mutex); + return true; +} + int snd_soc_register_component(struct device *dev, const struct snd_soc_component_driver *component_driver, struct snd_soc_dai_driver *dai_drv, @@ -2647,6 +2655,13 @@ int snd_soc_register_component(struct device *dev, { struct snd_soc_component *component; + if (component_driver->name && + !snd_soc_component_driver_name_is_unique(component_driver)) { + dev_err(dev, "component driver name %s is not unique\n", + component_driver->name); + return -EINVAL; + } + component = devm_kzalloc(dev, sizeof(*component), GFP_KERNEL); if (!component) return -ENOMEM; -- 2.17.1

3 6

snd_dice: Clicking artifacts with TC StudioKonnekt 48
by Mathias Buhr 10 May '20

10 May '20

Hi, thanks to this group, both of my firewire interfaces are (almost) working! Big thank you! While the TC Konnekt 24D works fine (playback and recording), the StudioKonnekt 48 produces clicking artifacts during playback when using snd_dice. This interface is working flawless on Windows and on a Jack/FFADO combination. This artifact occurs in all use cases (alsa via aplay, pulseaudio and jack) and does not seem to be in recorded streams. After recording the playback with another device, it looks like the level of the artifact is scaling with the signal and its interval is interestingly 256ms. Is there anything I can do to further debug this issue? Capture firewire packets? I would love to get this device fully working. I'm using kernel version 5.5.4 but this issue has been there for a long time. Thanks, Mathias

3 9

[alsa-devel] [alsa-lib][RFC PATCH] ucm: reset config id of condition items
by libin.yang＠linux.intel.com 09 May '20

09 May '20

From: Libin Yang <libin.yang(a)intel.com> UCMv2 supports "If" statement and will merge the same items with compound_merge(). If the items have the same id, it will fail to add the config items. And the id of the item in an array is automatically generated with the increased number. It is probably that some items to be merged have the same id. Let's add prefix in the id to avoid such situation. For example: If.seq1 { Condition { Type ControlExists Control "name='PGA1.0 1 Master Playback Volume'" } True { EnableSequence [ cset "name='PGA1.0 1 Master Playback Volume' 50" ] } } If.seq2 { Condition { Type ControlExists Control "name='PGA2.0 2 Master Playback Volume'" } True { EnableSequence [ cset "name='PGA2.0 2 Master Playback Volume' 50" ] } } If.seq3 { Condition { Type ControlExists Control "name='PGA3.0 3 Master Playback Volume'" } True { EnableSequence [ cset "name='PGA3.0 3 Master Playback Volume' 50" ] } } If seq1, seq2 and seq3 conditions are true, UCM will fail to initialize. This patch rename the config id to avoid the same id conflict. Signed-off-by: Libin Yang <libin.yang(a)intel.com> --- include/conf.h | 2 +- src/conf.c | 21 +++++++++++++++++++++ src/ucm/ucm_cond.c | 28 ++++++++++++++++++++++++---- 3 files changed, 46 insertions(+), 5 deletions(-) diff --git a/include/conf.h b/include/conf.h index 456b272..adb3d84 100644 --- a/include/conf.h +++ b/include/conf.h @@ -139,7 +139,7 @@ int snd_config_imake_safe_string(snd_config_t **config, const char *key, const c int snd_config_imake_pointer(snd_config_t **config, const char *key, const void *ptr); snd_config_type_t snd_config_get_type(const snd_config_t *config); - +int snd_config_of_array(const snd_config_t *config); int snd_config_set_id(snd_config_t *config, const char *id); int snd_config_set_integer(snd_config_t *config, long value); int snd_config_set_integer64(snd_config_t *config, long long value); diff --git a/src/conf.c b/src/conf.c index 50d0403..43d565b 100644 --- a/src/conf.c +++ b/src/conf.c @@ -435,6 +435,8 @@ struct _snd_config { char *id; snd_config_type_t type; int refcount; /* default = 0 */ + /* member of an array */ + int of_array; union { long integer; long long integer64; @@ -1123,6 +1125,7 @@ static int _snd_config_make(snd_config_t **config, char **id, snd_config_type_t *id = NULL; } n->type = type; + n->of_array = 0; if (type == SND_CONFIG_TYPE_COMPOUND) INIT_LIST_HEAD(&n->u.compound.fields); *config = n; @@ -1316,6 +1319,8 @@ static int parse_array_def(snd_config_t *parent, input_t *input, int *idx, int s default: unget_char(c, input); err = parse_value(&n, parent, input, &id, skip); + /* this is a member of an array */ + n->of_array = 1; if (err < 0) goto __end; break; @@ -1784,6 +1789,22 @@ snd_config_type_t snd_config_get_type(const snd_config_t *config) } /** + * \brief Returns the of_array of a configuration node. + * \param config Handle to the configuration node. + * \return of_array of the node + * + * The returned value indicates whether the node is a member of an array. + * + * \par Conforming to: + * LSB 3.2 + */ +int snd_config_of_array(const snd_config_t *config) +{ + assert(config); + return config->of_array; +} + +/** * \brief Returns the id of a configuration node. * \param[in] config Handle to the configuration node. * \param[out] id The function puts the pointer to the id string at the diff --git a/src/ucm/ucm_cond.c b/src/ucm/ucm_cond.c index 22b418d..725a69e 100644 --- a/src/ucm/ucm_cond.c +++ b/src/ucm/ucm_cond.c @@ -347,14 +347,15 @@ static void config_dump(snd_config_t *cfg) } #endif -static int compound_merge(const char *id, +static int compound_merge(const char *id, const char *cname, snd_config_t *dst, snd_config_t *src, snd_config_t *before, snd_config_t *after) { snd_config_iterator_t i, next; snd_config_t *n, *_before = NULL, *_after = NULL; const char *s; - int err; + char s1[32]; + int err, cnt; if (snd_config_get_type(src) != SND_CONFIG_TYPE_COMPOUND) { uc_error("compound type expected for If True/False block"); @@ -387,8 +388,22 @@ static int compound_merge(const char *id, return -EINVAL; } + cnt = 0; snd_config_for_each(i, next, src) { n = snd_config_iterator_entry(i); + /* + * If n is an array member, n->id is automatically generated. + * It is prossible that n->id is used by other array member, + * which will be merged with this one. So let's add prefix + * to the id to avoid the conflict. + */ + if (snd_config_of_array(n)) { + err = snd_config_get_id(n, &s); + if (err < 0) + return err; /* FIXME: this will never happen */ + snprintf(s1, sizeof(s1), "%s-%d-%s", cname, cnt++, s); + snd_config_set_id(n, (const char *)s1); + } err = snd_config_remove(n); if (err < 0) return err; @@ -422,7 +437,7 @@ int uc_mgr_evaluate_condition(snd_use_case_mgr_t *uc_mgr, { snd_config_iterator_t i, i2, next, next2; snd_config_t *a, *n, *n2, *parent2, *before, *after; - const char *id; + const char *id, *cname; int err; if (uc_mgr->conf_format < 2) { @@ -437,6 +452,10 @@ int uc_mgr_evaluate_condition(snd_use_case_mgr_t *uc_mgr, snd_config_for_each(i, next, cond) { n = snd_config_iterator_entry(i); + err = snd_config_get_id(n, &cname); + if (err < 0) + return err; /* FIXME: this will never happen */ + before = after = NULL; err = if_eval_one(uc_mgr, n, &a, &before, &after); if (err < 0) @@ -469,7 +488,8 @@ __add: err = snd_config_search(parent, id, &parent2); if (err == -ENOENT) goto __add; - err = compound_merge(id, parent2, n2, before, after); + err = compound_merge(id, cname, parent2, n2, + before, after); if (err < 0) return err; } -- 2.7.4

4 8

[PATCH] ASoC: mxs-saif: Add variable dev to simplify code
by Tang Bin 08 May '20

08 May '20

Add variable 'dev' to make the code cleaner in the function mxs_saif_probe(). And now that the function mxs_saif_mclk_init() have defined the variables 'ret' as the error returned value, then it should be used instead in this place. Signed-off-by: Zhang Shengju <zhangshengju(a)cmss.chinamobile.com> Signed-off-by: Tang Bin <tangbin(a)cmss.chinamobile.com> --- sound/soc/mxs/mxs-saif.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index dc197883e..f4e441183 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -719,7 +719,7 @@ static int mxs_saif_mclk_init(struct platform_device *pdev) if (ret == -EEXIST) return 0; dev_err(&pdev->dev, "failed to register mclk: %d\n", ret); - return PTR_ERR(clk); + return ret; } ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); @@ -732,6 +732,7 @@ static int mxs_saif_mclk_init(struct platform_device *pdev) static int mxs_saif_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; struct mxs_saif *saif; int irq, ret; struct device_node *master; @@ -739,7 +740,7 @@ static int mxs_saif_probe(struct platform_device *pdev) if (!np) return -EINVAL; - saif = devm_kzalloc(&pdev->dev, sizeof(*saif), GFP_KERNEL); + saif = devm_kzalloc(dev, sizeof(*saif), GFP_KERNEL); if (!saif) return -ENOMEM; @@ -750,7 +751,7 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->id = ret; if (saif->id >= ARRAY_SIZE(mxs_saif)) { - dev_err(&pdev->dev, "get wrong saif id\n"); + dev_err(dev, "get wrong saif id\n"); return -EINVAL; } @@ -770,18 +771,17 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->master_id = ret; if (saif->master_id >= ARRAY_SIZE(mxs_saif)) { - dev_err(&pdev->dev, "get wrong master id\n"); + dev_err(dev, "get wrong master id\n"); return -EINVAL; } } mxs_saif[saif->id] = saif; - saif->clk = devm_clk_get(&pdev->dev, NULL); + saif->clk = devm_clk_get(dev, NULL); if (IS_ERR(saif->clk)) { ret = PTR_ERR(saif->clk); - dev_err(&pdev->dev, "Cannot get the clock: %d\n", - ret); + dev_err(dev, "Cannot get the clock: %d\n", ret); return ret; } @@ -793,11 +793,11 @@ static int mxs_saif_probe(struct platform_device *pdev) if (irq < 0) return irq; - saif->dev = &pdev->dev; - ret = devm_request_irq(&pdev->dev, irq, mxs_saif_irq, 0, - dev_name(&pdev->dev), saif); + saif->dev = dev; + ret = devm_request_irq(dev, irq, mxs_saif_irq, 0, + dev_name(dev), saif); if (ret) { - dev_err(&pdev->dev, "failed to request irq\n"); + dev_err(dev, "failed to request irq\n"); return ret; } @@ -807,19 +807,19 @@ static int mxs_saif_probe(struct platform_device *pdev) if (saif->id == 0) { ret = mxs_saif_mclk_init(pdev); if (ret) - dev_warn(&pdev->dev, "failed to init clocks\n"); + dev_warn(dev, "failed to init clocks\n"); } - ret = devm_snd_soc_register_component(&pdev->dev, &mxs_saif_component, + ret = devm_snd_soc_register_component(dev, &mxs_saif_component, &mxs_saif_dai, 1); if (ret) { - dev_err(&pdev->dev, "register DAI failed\n"); + dev_err(dev, "register DAI failed\n"); return ret; } - ret = mxs_pcm_platform_register(&pdev->dev); + ret = mxs_pcm_platform_register(dev); if (ret) { - dev_err(&pdev->dev, "register PCM failed: %d\n", ret); + dev_err(dev, "register PCM failed: %d\n", ret); return ret; } -- 2.20.1.windows.1

2 1

[alsa-devel] [PATCH v4 00/12] ASoC: Add support to WCD9340/WCD9341 codec
by Srinivas Kandagatla 08 May '20

08 May '20

This patchset adds support to Qualcomm WCD9340/WCD9341 Codec which is a standalone Hi-Fi audio codec IC. This codec supports both I2S/I2C and SLIMbus audio interfaces. On slimbus interface it supports two data lanes; 16 Tx ports and 8 Rx ports. It has Five DACs and seven dedicated interpolators, Multibutton headset control (MBHC), Active noise cancellation, Sidetone paths, MAD (mic activity detection) and codec processing engine. It supports Class-H differential earpiece out and stereo single ended headphones out. This codec also has integrated SoundWire controller. Patchset for this is already sent for review at https://patchwork.kernel.org/cover/11185769/ This patchset has been tested on SDM845 based DragonBoard DB845c and Lenovo Yoga C630 laptop with WSA881x smart speaker amplifiers via soundwire and 4 DMICs. gpio controller patch does not have any link dependency, it can go by its own. Most of the code in this driver is rework of Qualcomm downstream drivers used in Andriod. Credits to Banajit Goswami and Patrick Lai's Team. Thanks, srini Changes since v3: - Added new SLIMBus common bindings suggested by Rob. - renamed microvolts to microvolt in bindings as suggested by Rob - dumped pinctrl driver and added new simple gpio driver - few cosmetic cleanups in mfd driver. Srinivas Kandagatla (12): dt-bindings: SLIMBus: add slim devices optional properties ASoC: dt-bindings: add dt bindings for WCD9340/WCD9341 audio codec mfd: wcd934x: add support to wcd9340/wcd9341 codec ASoC: wcd934x: add support to wcd9340/wcd9341 codec ASoC: wcd934x: add basic controls ASoC: wcd934x: add playback dapm widgets ASoC: wcd934x: add capture dapm widgets ASoC: wcd934x: add audio routings dt-bindings: gpio: wcd934x: Add bindings for gpio gpio: wcd934x: Add support to wcd934x gpio controller ASoC: qcom: dt-bindings: Add compatible for DB845c and Lenovo Yoga ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga .../bindings/gpio/qcom,wcd934x-gpio.yaml | 47 + .../devicetree/bindings/slimbus/bus.txt | 10 + .../devicetree/bindings/sound/qcom,sdm845.txt | 5 +- .../bindings/sound/qcom,wcd934x.yaml | 163 + drivers/gpio/Kconfig | 8 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-wcd934x.c | 104 + drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/wcd934x.c | 306 + include/linux/mfd/wcd934x/registers.h | 531 ++ include/linux/mfd/wcd934x/wcd934x.h | 31 + sound/soc/codecs/Kconfig | 10 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/wcd934x.c | 5084 +++++++++++++++++ sound/soc/qcom/sdm845.c | 86 +- 16 files changed, 6399 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/qcom,wcd934x-gpio.yaml create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd934x.yaml create mode 100644 drivers/gpio/gpio-wcd934x.c create mode 100644 drivers/mfd/wcd934x.c create mode 100644 include/linux/mfd/wcd934x/registers.h create mode 100644 include/linux/mfd/wcd934x/wcd934x.h create mode 100644 sound/soc/codecs/wcd934x.c -- 2.21.0

4 17

[PATCH] ASoC: Intel: sst: ipc command timeout
by Brent Lu 07 May '20

07 May '20

After sending an ipc command to DSP, the host waits for the reply message which will be read from SST_IPCD register in sst_byt_irq_thread() to complete the transaction. Sometimes the value read from SST_IPCD register is still the reply message for previous command instead of the waiting command so ipc command timeout happens. In an experiment we read the same SST_IPCD register again when the defect happens and found the value of second read is different from previous one and is the correct reply message. It suggests the DSP is okay but the way we read the register may be the cause. Currently the driver is using memcpy_fromio() to read the value of 64-bit registers. This function is based on __builtin_memcpy() call and depends on the implementation of compiler. Since this issue happens right after the toolchain switched from clang 10 to clang 11, we replace the register read with two readl() function calls to avoid all optimization from compiler's library. Signed-off-by: Brent Lu <brent.lu(a)intel.com> --- sound/soc/intel/common/sst-dsp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/common/sst-dsp.c b/sound/soc/intel/common/sst-dsp.c index ec66be2..12af7aa 100644 --- a/sound/soc/intel/common/sst-dsp.c +++ b/sound/soc/intel/common/sst-dsp.c @@ -42,7 +42,7 @@ u64 sst_shim32_read64(void __iomem *addr, u32 offset) { u64 val; - memcpy_fromio(&val, addr + offset, sizeof(val)); + sst_memcpy_fromio_32(NULL, &val, addr + offset, sizeof(val)); return val; } EXPORT_SYMBOL_GPL(sst_shim32_read64); -- 2.7.4

7 14

[PATCH] ASoC: dt-bindings: ak4642: switch to yaml base Documentation
by Kuninori Morimoto 06 May '20

06 May '20

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> This patch switches from .txt base to .yaml base Document. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- .../devicetree/bindings/sound/ak4642.txt | 37 ------------ .../devicetree/bindings/sound/ak4642.yaml | 58 +++++++++++++++++++ 2 files changed, 58 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/ak4642.txt create mode 100644 Documentation/devicetree/bindings/sound/ak4642.yaml diff --git a/Documentation/devicetree/bindings/sound/ak4642.txt b/Documentation/devicetree/bindings/sound/ak4642.txt deleted file mode 100644 index 58e48ee97175..000000000000 --- a/Documentation/devicetree/bindings/sound/ak4642.txt +++ /dev/null @@ -1,37 +0,0 @@ -AK4642 I2C transmitter - -This device supports I2C mode only. - -Required properties: - - - compatible : "asahi-kasei,ak4642" or "asahi-kasei,ak4643" or "asahi-kasei,ak4648" - - reg : The chip select number on the I2C bus - -Optional properties: - - - #clock-cells : common clock binding; shall be set to 0 - - clocks : common clock binding; MCKI clock - - clock-frequency : common clock binding; frequency of MCKO - - clock-output-names : common clock binding; MCKO clock name - -Example 1: - -&i2c { - ak4648: ak4648@12 { - compatible = "asahi-kasei,ak4642"; - reg = <0x12>; - }; -}; - -Example 2: - -&i2c { - ak4643: codec@12 { - compatible = "asahi-kasei,ak4643"; - reg = <0x12>; - #clock-cells = <0>; - clocks = <&audio_clock>; - clock-frequency = <12288000>; - clock-output-names = "ak4643_mcko"; - }; -}; diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml new file mode 100644 index 000000000000..6cd213be2266 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak4642.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/ak4642.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AK4642 I2C transmitter Device Tree Bindings + +maintainers: + - Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> + +properties: + compatible: + enum: + - asahi-kasei,ak4642 + - asahi-kasei,ak4643 + - asahi-kasei,ak4648 + + reg: + maxItems: 1 + + "#clock-cells": + const: 0 + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-frequency: + description: common clock binding; frequency of MCKO + $ref: /schemas/types.yaml#/definitions/uint32 + + clock-output-names: + description: common clock name + $ref: /schemas/types.yaml#/definitions/string + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + ak4643: codec@12 { + compatible = "asahi-kasei,ak4643"; + #sound-dai-cells = <0>; + reg = <0x12>; + #clock-cells = <0>; + clocks = <&audio_clock>; + clock-frequency = <12288000>; + clock-output-names = "ak4643_mcko"; + }; + }; -- 2.17.1

2 1

[PATCH] [inline assembly] fix pcm_dmix_i386.h assembly chunk interfaces
by frederic.recoules＠univ-grenoble-alpes.fr 06 May '20

06 May '20

From: Frédéric Recoules <frederic.recoules(a)orange.fr> Enabler change: - set HAVE_MMX in configure if the compiler is aware of MMX technology Main changes are: - move 'size' and 'old_ebx' to the output list since they are clobbered - add the "memory" keyword since input pointers are dereferenced - add mmx registers in the clobber list and add an initialization for mm1 - add ebx in clobbers via a set of macro when GCC is newer than 5.0 (it will work for other compilers or non-PIC mode too) Minor changes are: - keep consistent the token numbering in the template - remove the manual save/restore ebx when it is in the clobber list - allows 'dst_step', 'src_step' and 'sum_step' to be given by immediates - allows 'size' to be given by register (e.g. ebp) - add "cc" keyword since the eflag register is clobbered Signed-off-by: Frédéric Recoules <frederic.recoules(a)orange.fr> --- configure.ac | 7 ++ src/pcm/pcm_dmix_i386.h | 174 +++++++++++++++++++++++----------------- 2 files changed, 106 insertions(+), 75 deletions(-) diff --git a/configure.ac b/configure.ac index 4b5ab662..1838e50b 100644 --- a/configure.ac +++ b/configure.ac @@ -516,6 +516,13 @@ if test -z "$gcc_have_atomics"; then fi AC_MSG_RESULT($gcc_have_atomics) +dnl check mmx register for pcm_dmix_i386 + +AC_TRY_LINK([], + [__asm__ volatile ("" : : : "mm0");], + [AC_DEFINE([HAVE_MMX], "1", [MMX technology is enabled])], + []) + PCM_PLUGIN_LIST="copy linear route mulaw alaw adpcm rate plug multi shm file null empty share meter hooks lfloat ladspa dmix dshare dsnoop asym iec958 softvol extplug ioplug mmap_emul" build_pcm_plugin="no" diff --git a/src/pcm/pcm_dmix_i386.h b/src/pcm/pcm_dmix_i386.h index 2778cb1d..aa1717f6 100644 --- a/src/pcm/pcm_dmix_i386.h +++ b/src/pcm/pcm_dmix_i386.h @@ -26,6 +26,13 @@ * */ +#define COMMA , +#if __GNUC__ < 5 && defined(__PIC__) +# define GCC_PIC_SWITCH(before,after) before +#else +# define GCC_PIC_SWITCH(before,after) after +#endif + /* * for plain i386 */ @@ -47,13 +54,14 @@ static void MIX_AREAS_16(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %%ebx, %1\n",) /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" + "\tmovl %2, %%edi\n" + "\tmovl %3, %%esi\n" + "\tmovl %4, %%ebx\n" "\tcmpl $0, %0\n" "\tjnz 2f\n" "\tjmp 7f\n" @@ -64,9 +72,9 @@ static void MIX_AREAS_16(unsigned int size, */ "\t.p2align 4,,15\n" "1:" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %5, %%edi\n" + "\tadd %6, %%esi\n" + "\tadd %7, %%ebx\n" /* * sample = *src; @@ -138,15 +146,16 @@ static void MIX_AREAS_16(unsigned int size, "\tjnz 4b\n" "\tdecl %0\n" "\tjnz 1b\n" - - "7:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ - : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) - : "esi", "edi", "edx", "ecx", "eax" + "7:" + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %1, %%ebx\n",) + + : "+&rm" (size), GCC_PIC_SWITCH("=m","=X") (old_ebx) + : "m" (dst), "m" (src), "m" (sum), + "im" (dst_step), "im" (src_step), "im" (sum_step) + : "esi", "edi", "edx", "ecx", GCC_PIC_SWITCH(,"ebx"COMMA) "eax", + "memory", "cc" ); } @@ -171,22 +180,24 @@ static void MIX_AREAS_16_MMX(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %%ebx, %1\n",) /* - * initialization, load ESI, EDI, EBX registers + * initialization, load ESI, EDI, EBX registers, clear MM1 */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" + "\tpxor %%mm1, %%mm1\n" + "\tmovl %2, %%edi\n" + "\tmovl %3, %%esi\n" + "\tmovl %4, %%ebx\n" "\tcmpl $0, %0\n" "\tjnz 2f\n" "\tjmp 5f\n" "\t.p2align 4,,15\n" "1:" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %5, %%edi\n" + "\tadd %6, %%esi\n" + "\tadd %7, %%ebx\n" "2:" /* @@ -230,13 +241,20 @@ static void MIX_AREAS_16_MMX(unsigned int size, "\tjnz 1b\n" "\temms\n" "5:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ - - : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) - : "esi", "edi", "edx", "ecx", "eax" + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %1, %%ebx\n",) + + : "+&rm" (size), GCC_PIC_SWITCH("=m","=X") (old_ebx) + : "m" (dst), "m" (src), "m" (sum), + "im" (dst_step), "im" (src_step), "im" (sum_step) + : "esi", "edi", "edx", "ecx", GCC_PIC_SWITCH(,"ebx"COMMA) "eax", + "memory", "cc", +# ifdef HAVE_MMX + "mm0", "mm1" +# else + "st", "st(1)", "st(2)", "st(3)", + "st(4)", "st(5)", "st(6)", "st(7)" +# endif ); } @@ -261,13 +279,14 @@ static void MIX_AREAS_32(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %%ebx, %1\n",) /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" + "\tmovl %2, %%edi\n" + "\tmovl %3, %%esi\n" + "\tmovl %4, %%ebx\n" "\tcmpl $0, %0\n" "\tjnz 1f\n" "\tjmp 6f\n" @@ -337,19 +356,20 @@ static void MIX_AREAS_32(unsigned int size, */ "\tdecl %0\n" "\tjz 6f\n" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %5, %%edi\n" + "\tadd %6, %%esi\n" + "\tadd %7, %%ebx\n" "\tjmp 1b\n" - - "6:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ - : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) - : "esi", "edi", "edx", "ecx", "eax" + "6:" + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %1, %%ebx\n",) + + : "+&rm" (size), GCC_PIC_SWITCH("=m","=X") (old_ebx) + : "m" (dst), "m" (src), "m" (sum), + "im" (dst_step), "im" (src_step), "im" (sum_step) + : "esi", "edi", "edx", "ecx", GCC_PIC_SWITCH(,"ebx"COMMA) "eax", + "memory", "cc" ); } @@ -374,13 +394,14 @@ static void MIX_AREAS_24(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %%ebx, %1\n",) /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" + "\tmovl %2, %%edi\n" + "\tmovl %3, %%esi\n" + "\tmovl %4, %%ebx\n" "\tcmpl $0, %0\n" "\tjnz 1f\n" "\tjmp 6f\n" @@ -443,19 +464,20 @@ static void MIX_AREAS_24(unsigned int size, */ "\tdecl %0\n" "\tjz 6f\n" - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %5, %%edi\n" + "\tadd %6, %%esi\n" + "\tadd %7, %%ebx\n" "\tjmp 1b\n" - - "6:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ - : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) - : "esi", "edi", "edx", "ecx", "eax" + "6:" + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %1, %%ebx\n",) + + : "+&rm" (size), GCC_PIC_SWITCH("=m","=X") (old_ebx) + : "m" (dst), "m" (src), "m" (sum), + "im" (dst_step), "im" (src_step), "im" (sum_step) + : "esi", "edi", "edx", "ecx", GCC_PIC_SWITCH(,"ebx"COMMA) "eax", + "memory", "cc" ); } @@ -480,13 +502,14 @@ static void MIX_AREAS_24_CMOV(unsigned int size, __asm__ __volatile__ ( "\n" - "\tmovl %%ebx, %7\n" /* ebx is GOT pointer (-fPIC) */ + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %%ebx, %1\n",) /* * initialization, load ESI, EDI, EBX registers */ - "\tmovl %1, %%edi\n" - "\tmovl %2, %%esi\n" - "\tmovl %3, %%ebx\n" + "\tmovl %2, %%edi\n" + "\tmovl %3, %%esi\n" + "\tmovl %4, %%ebx\n" "\tcmpl $0, %0\n" "\tjz 6f\n" @@ -541,19 +564,20 @@ static void MIX_AREAS_24_CMOV(unsigned int size, /* * while (size-- > 0) */ - "\tadd %4, %%edi\n" - "\tadd %5, %%esi\n" - "\tadd %6, %%ebx\n" + "\tadd %5, %%edi\n" + "\tadd %6, %%esi\n" + "\tadd %7, %%ebx\n" "\tdecl %0\n" "\tjnz 1b\n" - - "6:" - "\tmovl %7, %%ebx\n" /* ebx is GOT pointer (-fPIC) */ - : /* no output regs */ - : "m" (size), "m" (dst), "m" (src), - "m" (sum), "m" (dst_step), "m" (src_step), - "m" (sum_step), "m" (old_ebx) - : "esi", "edi", "edx", "ecx", "eax" + "6:" + /* ebx is GOT pointer (-fPIC) */ + GCC_PIC_SWITCH("\tmovl %1, %%ebx\n",) + + : "+&rm" (size), GCC_PIC_SWITCH("=m","=X") (old_ebx) + : "m" (dst), "m" (src), "m" (sum), + "im" (dst_step), "im" (src_step), "im" (sum_step) + : "esi", "edi", "edx", "ecx", GCC_PIC_SWITCH(,"ebx"COMMA) "eax", + "memory", "cc" ); } -- 2.17.1

3 5