April 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH v3 0/7] Add H6 I2S support
by Clément Péron 04 Sep '20

04 Sep '20

Hi, This is a sequel of Marcus Cooper serie[0], where remarks made by Maxime have been fixed. I have tested it on my Beelink GS1 board. Thanks, Clement 0: https://lore.kernel.org/patchwork/cover/1139949/ Changes since v2 (thanks Maxime): - Add details in commit log about sign extend sample - Only set FIFO regs as volatile in regmap - Missing a space (detected by checkpatch) Changes since v1: - Fix missing header in set sign extend sample Jernej Skrabec (3): dt-bindings: ASoC: sun4i-i2s: Add H6 compatible ASoC: sun4i-i2s: Add support for H6 I2S arm64: dts: sun50i-h6: Add HDMI audio to H6 DTSI Marcus Cooper (4): ASoC: sun4i-i2s: Adjust LRCLK width ASoC: sun4i-i2s: Set sign extend sample ASoc: sun4i-i2s: Add 20 and 24 bit support ASoC: sun4i-i2s: Adjust regmap settings .../sound/allwinner,sun4i-a10-i2s.yaml | 2 + arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 31 ++ sound/soc/sunxi/sun4i-i2s.c | 265 +++++++++++++++++- 3 files changed, 296 insertions(+), 2 deletions(-) -- 2.20.1

6 28

[alsa-devel] Attempting to understand odd snd-usb-audio code and behavior
by Keith A. Milner 21 Aug '20

21 Aug '20

Over the last few weeks I've been trying to dig through the snd-usb-audio code to try to get an understanding of it. I've used ftrace and also a local version which I have heavily polluted with kprintf(KERN_INFO statements so I can track what it's doing in practice. I've been playing with this with some USB audio interfaces I have some which work, and some which don't, and trying to understand the differences and, ultimately, what I can do to make the non-functioning ones work. I've got to the point where I have a fairly good understanding of some parts, but I'm struggling to understand why the code is behaving as it does in practice. My observation when plugging the USB device in is that, as expected, it tries to build the audio device, and add components to it including attaching capture and playback streams. It seems to go through this phase without too many surprises, and we get to the standard dmesg output: usbcore: registered new interface driver snd-usb-audio After this, it gets confusing. It seems to open and close the PCMs (e.g, snd_usb_capture_open) several times in a row. Each time it sets up the hardware info, checks and sets the format and then closes the PCM. I don't see anything obviously different between most of these cycles. Here's an example my logging output (hopefully this will make sense): Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Called: pcm.c - snd_usb_capture_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Called: pcm.c - snd_usb_pcm_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Setting up hw info Aug 22 20:04:16 kerneldev kernel: [ 923.140789] Checking format: Aug 22 20:04:16 kerneldev kernel: [ 923.140790] Interface number = 2 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] alt setting = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] alt setting index = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] format type = 1 Aug 22 20:04:16 kerneldev kernel: [ 923.140790] frame size = 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140791] Setting pt=125 ptmin=125 Aug 22 20:04:16 kerneldev kernel: [ 923.140792] Checking for unusual bit rates Aug 22 20:04:16 kerneldev kernel: [ 923.140794] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.140921] Called: pcm.c - snd_usb_hw_params for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Setting format: Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Bytes per period = 8816 Aug 22 20:04:16 kerneldev kernel: [ 923.140945] Frames per period = 1102 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Periods per buffer = 4 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Channels = 2 Aug 22 20:04:16 kerneldev kernel: [ 923.140946] Rate = 44100 Aug 22 20:04:16 kerneldev kernel: [ 923.141279] Called: endpoint.c - snd_usb_add_endpoint of type 0 with direction 1 Aug 22 20:04:16 kerneldev kernel: [ 923.141292] Called: pcm.c - snd_usb_pcm_prepare for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141293] Called: pcm.c - configure_endpoint Aug 22 20:04:16 kerneldev kernel: [ 923.141294] Called: endpoint.c - snd_usb_endpoint_set_params for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] Setting endpoint params for endpoint num 142 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] channels=2 Aug 22 20:04:16 kerneldev kernel: [ 923.141294] period bytes=8816 Aug 22 20:04:16 kerneldev kernel: [ 923.141295] frames per period=1102 Aug 22 20:04:16 kerneldev kernel: [ 923.141295] periods per buffer=4 Aug 22 20:04:16 kerneldev kernel: [ 923.141296] Called: endpoint.c - data_ep_set_params for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.141301] Called: pcm.c - snd_usb_pcm_prepare for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142768] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.142772] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.142774] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.142830] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.142836] Called: pcm.c - snd_usb_hw_free for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142837] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 142, type 0 Aug 22 20:04:16 kerneldev kernel: [ 923.142846] Called: pcm.c - snd_usb_capture_close for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146760] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.146834] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146838] Called: init.c - snd_card_file_remove Aug 22 20:04:16 kerneldev kernel: [ 923.146841] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146845] Called: init.c - snd_card_file_add Aug 22 20:04:16 kerneldev kernel: [ 923.146848] Called: pcm.c - snd_usb_capture_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146849] Called: pcm.c - snd_usb_pcm_open for pcm substream 0 Aug 22 20:04:16 kerneldev kernel: [ 923.146849] Setting up hw info It seems to do this several times, before the behavior changing slightly, as it now starts to try to set the endpoint parameters and seems to leave the stream open. However, it then tries to open the stream and set the endpoint parameters again resulting in errors: Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] Called: endpoint.c - snd_usb_endpoint_set_params for endpoint 142, type 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] Setting endpoint params for endpoint num 142 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] channels=2 Aug 22 20:22:00 kerneldev kernel: [ 1987.452945] period bytes=1768 Aug 22 20:22:00 kerneldev kernel: [ 1987.452946] frames per period=221 Aug 22 20:22:00 kerneldev kernel: [ 1987.452946] periods per buffer=593 Aug 22 20:22:00 kerneldev kernel: [ 1987.452947] usb 1-1: Unable to change format on ep #8e: already in use Maybe this is driven by hotplug or something, but it seems to be performing a lot of pointless activities. Eventually it seems to try to open the PCM playback or capture stream (with some devices it opens playback, with others capture) and then checks the pointer: Aug 22 20:22:00 kerneldev kernel: [ 1987.470194] Called: pcm.c - snd_usb_substream_playback_trigger for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470198] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470198] Pointer is 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470656] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470657] Pointer is 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470660] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:00 kerneldev kernel: [ 1987.470660] Pointer is 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473567] Called: pcm.c - snd_usb_pcm_pointer for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473569] Pointer is 0 The above is from a non-working device. For a working device the pointer increments. Eventually this activity ends: Aug 22 20:22:05 kerneldev kernel: [ 1992.473575] Called: pcm.c - snd_usb_substream_playback_trigger for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473576] Called: endpoint.c - snd_usb_endpoint_stop for endpoint 142, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473578] Called: endpoint.c - snd_usb_endpoint_stop for endpoint 13, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.473602] Called: pcm.c - snd_usb_hw_free for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503287] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 142, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503288] Called: endpoint.c - snd_usb_endpoint_deactivate for endpoint 13, type 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503323] Called: pcm.c - snd_usb_playback_close for pcm substream 0 Aug 22 20:22:05 kerneldev kernel: [ 1992.503656] Called: init.c - snd_card_file_remove This seems as if it might be some sort of test of the PCMs, to make sure they are working. Certainly in non-working devices the pcm_pointer stays at zero and in working devices it increments. It also seems to try harder with some devices than others, even though the device descriptors seem very similar. Can anyone explain any of this to me, particularly why it's exhibiting this behaviour. I've uploaded one of the logs from a non-working device to Pastebin if anyone wants to look at a full example: https://pastebin.com/uBZEuQ57 Also, is this the best way to approach this, or are there other tools/techniques that can help? I've experimented with ftrace and that was useful, but didn't give the level of detail I wanted. Cheers, Keith

3 10

[PATCH] ASoC: Intel: haswell: Power transition refactor
by Cezary Rojewski 20 Jun '20

20 Jun '20

Update D0 <-> D3 sequence to correctly transition hardware and DSP core from and to D3. On top of that, set SHIM registers to their recommended defaults during D0 and D3 proceduces as HW does not reset registers for us. Connected to: [alsa-devel][BUG] bdw-rt5650 DSP boot timeout https://mailman.alsa-project.org/pipermail/alsa-devel/2019-July/153098.html Github issue ticket reference: https://github.com/thesofproject/linux/pull/1842 Tested on: - BDW-Y RVP with rt286 - SAMUS with rt5677 Proposed solution (both in July 2019 and on github): 'Revert "ASoC: Intel: Work around to fix HW d3 potential crash issue"' is NAKed as it only covers the problem up and actually brings back the undefined behavior: some registers (e.g.: APLLSE) are describing LPT offsets rather than WPT ones. In consequence, during power-transitions driver issues incorrect writes and leaves the regs of interest alone. Existing patch - the non-revert - does not resolve the HW D3 issue at all as it ignores the recommended sequence and does not initialize hardware registers as expected. And thus, leaving things as are is also unacceptable. Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- sound/soc/intel/haswell/sst-haswell-dsp.c | 185 ++++++++++++---------- 1 file changed, 104 insertions(+), 81 deletions(-) diff --git a/sound/soc/intel/haswell/sst-haswell-dsp.c b/sound/soc/intel/haswell/sst-haswell-dsp.c index 88c3f63bded9..de80e19454c1 100644 --- a/sound/soc/intel/haswell/sst-haswell-dsp.c +++ b/sound/soc/intel/haswell/sst-haswell-dsp.c @@ -243,45 +243,92 @@ static irqreturn_t hsw_irq(int irq, void *context) return ret; } +#define CSR_DEFAULT_VALUE 0x8480040E +#define ISC_DEFAULT_VALUE 0x0 +#define ISD_DEFAULT_VALUE 0x0 +#define IMC_DEFAULT_VALUE 0x7FFF0003 +#define IMD_DEFAULT_VALUE 0x7FFF0003 +#define IPCC_DEFAULT_VALUE 0x0 +#define IPCD_DEFAULT_VALUE 0x0 +#define CLKCTL_DEFAULT_VALUE 0x7FF +#define CSR2_DEFAULT_VALUE 0x0 +#define LTR_CTRL_DEFAULT_VALUE 0x0 +#define HMD_CTRL_DEFAULT_VALUE 0x0 + +static void hsw_set_shim_defaults(struct sst_dsp *sst) +{ + sst_dsp_shim_write_unlocked(sst, SST_CSR, CSR_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_ISRX, ISC_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_ISRD, ISD_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IMRX, IMC_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IMRD, IMD_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IPCX, IPCC_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_IPCD, IPCD_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_CLKCTL, CLKCTL_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_CSR2, CSR2_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_LTRC, LTR_CTRL_DEFAULT_VALUE); + sst_dsp_shim_write_unlocked(sst, SST_HMDC, HMD_CTRL_DEFAULT_VALUE); +} + +/* all clock-gating minus DCLCGE and DTCGE */ +#define SST_VDRTCL2_CG_OTHER 0xB7D + static void hsw_set_dsp_D3(struct sst_dsp *sst) { - u32 val; u32 reg; - /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ + /* disable clock core gating */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE); + reg &= ~(SST_VDRTCL2_DCLCGE); writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* enable power gating and switch off DRAM & IRAM blocks */ - val = readl(sst->addr.pci_cfg + SST_VDRTCTL0); - val |= SST_VDRTCL0_DSRAMPGE_MASK | - SST_VDRTCL0_ISRAMPGE_MASK; - val &= ~(SST_VDRTCL0_D3PGD | SST_VDRTCL0_D3SRAMPGD); - writel(val, sst->addr.pci_cfg + SST_VDRTCTL0); + /* stall, reset and set 24MHz XOSC */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, + SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST, + SST_CSR_24MHZ_LPCS | SST_CSR_STALL | SST_CSR_RST); - /* switch off audio PLL */ - val = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - val |= SST_VDRTCL2_APLLSE_MASK; - writel(val, sst->addr.pci_cfg + SST_VDRTCTL2); + /* DRAM power gating all */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); + reg |= SST_VDRTCL0_ISRAMPGE_MASK | + SST_VDRTCL0_DSRAMPGE_MASK; + reg &= ~(SST_VDRTCL0_D3SRAMPGD); + reg |= SST_VDRTCL0_D3PGD; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + udelay(50); - /* disable MCLK(clkctl.smos = 0) */ - sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, - SST_CLKCTL_MASK, 0); + /* PLL shutdown enable */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_APLLSE_MASK; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* Set D3 state, delay 50 us */ - val = readl(sst->addr.pci_cfg + SST_PMCS); - val |= SST_PMCS_PS_MASK; - writel(val, sst->addr.pci_cfg + SST_PMCS); - udelay(50); + /* disable MCLK */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, + SST_CLKCTL_MASK, 0); - /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ + /* switch clock gating */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_CG_OTHER; + reg &= ~(SST_VDRTCL2_DTCGE); + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + /* enable DTCGE separatelly */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE; + reg |= SST_VDRTCL2_DTCGE; writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + /* set shim defaults */ + hsw_set_shim_defaults(sst); + + /* set D3 */ + reg = readl(sst->addr.pci_cfg + SST_PMCS); + reg |= SST_PMCS_PS_MASK; + writel(reg, sst->addr.pci_cfg + SST_PMCS); udelay(50); + /* enable clock core gating */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_DCLCGE; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + udelay(50); } static void hsw_reset(struct sst_dsp *sst) @@ -299,75 +346,62 @@ static void hsw_reset(struct sst_dsp *sst) SST_CSR_RST | SST_CSR_STALL, SST_CSR_STALL); } +/* recommended CSR state for power-up */ +#define SST_CSR_D0_MASK (0x18A09C0C | SST_CSR_DCS_MASK) + static int hsw_set_dsp_D0(struct sst_dsp *sst) { - int tries = 10; - u32 reg, fw_dump_bit; + u32 reg; - /* Disable core clock gating (VDRTCTL2.DCLCGE = 0) */ + /* disable clock core gating */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg &= ~(SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE); + reg &= ~(SST_VDRTCL2_DCLCGE); writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* Disable D3PG (VDRTCTL0.D3PGD = 1) */ - reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); - reg |= SST_VDRTCL0_D3PGD; - writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + /* switch clock gating */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); + reg |= SST_VDRTCL2_CG_OTHER; + reg &= ~(SST_VDRTCL2_DTCGE); + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* Set D0 state */ + /* set D0 */ reg = readl(sst->addr.pci_cfg + SST_PMCS); - reg &= ~SST_PMCS_PS_MASK; + reg &= ~(SST_PMCS_PS_MASK); writel(reg, sst->addr.pci_cfg + SST_PMCS); - /* check that ADSP shim is enabled */ - while (tries--) { - reg = readl(sst->addr.pci_cfg + SST_PMCS) & SST_PMCS_PS_MASK; - if (reg == 0) - goto finish; - - msleep(1); - } - - return -ENODEV; - -finish: - /* select SSP1 19.2MHz base clock, SSP clock 0, turn off Low Power Clock */ - sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, - SST_CSR_S1IOCS | SST_CSR_SBCS1 | SST_CSR_LPCS, 0x0); + /* DRAM power gating none */ + reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); + reg &= ~(SST_VDRTCL0_ISRAMPGE_MASK | + SST_VDRTCL0_DSRAMPGE_MASK); + reg |= SST_VDRTCL0_D3SRAMPGD; + reg |= SST_VDRTCL0_D3PGD; + writel(reg, sst->addr.pci_cfg + SST_VDRTCTL0); + mdelay(10); - /* stall DSP core, set clk to 192/96Mhz */ - sst_dsp_shim_update_bits_unlocked(sst, - SST_CSR, SST_CSR_STALL | SST_CSR_DCS_MASK, - SST_CSR_STALL | SST_CSR_DCS(4)); + /* set shim defaults */ + hsw_set_shim_defaults(sst); - /* Set 24MHz MCLK, prevent local clock gating, enable SSP0 clock */ + /* restore MCLK */ sst_dsp_shim_update_bits_unlocked(sst, SST_CLKCTL, - SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0, - SST_CLKCTL_MASK | SST_CLKCTL_DCPLCG | SST_CLKCTL_SCOE0); + SST_CLKCTL_MASK, SST_CLKCTL_MASK); - /* Stall and reset core, set CSR */ - hsw_reset(sst); - - /* Enable core clock gating (VDRTCTL2.DCLCGE = 1), delay 50 us */ + /* PLL shutdown disable */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg |= SST_VDRTCL2_DCLCGE | SST_VDRTCL2_DTCGE; + reg &= ~(SST_VDRTCL2_APLLSE_MASK); writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, + SST_CSR_D0_MASK, SST_CSR_SBCS0 | SST_CSR_SBCS1 | + SST_CSR_STALL | SST_CSR_DCS(4)); udelay(50); - /* switch on audio PLL */ + /* enable clock core gating */ reg = readl(sst->addr.pci_cfg + SST_VDRTCTL2); - reg &= ~SST_VDRTCL2_APLLSE_MASK; + reg |= SST_VDRTCL2_DCLCGE; writel(reg, sst->addr.pci_cfg + SST_VDRTCTL2); - /* set default power gating control, enable power gating control for all blocks. that is, - can't be accessed, please enable each block before accessing. */ - reg = readl(sst->addr.pci_cfg + SST_VDRTCTL0); - reg |= SST_VDRTCL0_DSRAMPGE_MASK | SST_VDRTCL0_ISRAMPGE_MASK; - /* for D0, always enable the block(DSRAM[0]) used for FW dump */ - fw_dump_bit = 1 << SST_VDRTCL0_DSRAMPGE_SHIFT; - writel(reg & ~fw_dump_bit, sst->addr.pci_cfg + SST_VDRTCTL0); - + /* clear reset */ + sst_dsp_shim_update_bits_unlocked(sst, SST_CSR, SST_CSR_RST, 0); /* disable DMA finish function for SSP0 & SSP1 */ sst_dsp_shim_update_bits_unlocked(sst, SST_CSR2, SST_CSR2_SDFD_SSP1, @@ -384,12 +418,6 @@ static int hsw_set_dsp_D0(struct sst_dsp *sst) sst_dsp_shim_update_bits(sst, SST_IMRD, (SST_IMRD_DONE | SST_IMRD_BUSY | SST_IMRD_SSP0 | SST_IMRD_DMAC), 0x0); - /* clear IPC registers */ - sst_dsp_shim_write(sst, SST_IPCX, 0x0); - sst_dsp_shim_write(sst, SST_IPCD, 0x0); - sst_dsp_shim_write(sst, 0x80, 0x6); - sst_dsp_shim_write(sst, 0xe0, 0x300a); - return 0; } @@ -415,11 +443,6 @@ static void hsw_sleep(struct sst_dsp *sst) { dev_dbg(sst->dev, "HSW_PM dsp runtime suspend\n"); - /* put DSP into reset and stall */ - sst_dsp_shim_update_bits(sst, SST_CSR, - SST_CSR_24MHZ_LPCS | SST_CSR_RST | SST_CSR_STALL, - SST_CSR_RST | SST_CSR_STALL | SST_CSR_24MHZ_LPCS); - hsw_set_dsp_D3(sst); dev_dbg(sst->dev, "HSW_PM dsp runtime suspend exit\n"); } -- 2.17.1

5 11

[alsa-devel] [PATCH 0/2 v4] ALSA: pcm: anonymous dup implementation
by Jaroslav Kysela 12 Jun '20

12 Jun '20

This patchset contains the anonymous dup implementation with permissions checking for the ALSA's PCM interface in kernel to enable the restricted DMA sound buffer sharing for the restricted tasks. The code was tested through qemu and it seems to be pretty stable. The initial tinyalsa implementation can be found here: https://github.com/perexg/tinyalsa/commits/anondup v2 of the patches: - change clone parameter to subdevice number for the pcm attach - change SNDRV_PCM_PERM_MAX to SNDRV_PCM_PERM_MASK - the tinyalsa implementation was a little updated (restructured) v3 of the patches: - group integer declarations in snd_pcm_anonymous_dup() - replaced substream->pcm with pcm in snd_pcm_anonymous_dup() - added SNDRV_PCM_PERM_RW check for read/write/readv/writev syscalls v4 of the patches: - more simple restriction control (only two modes - full/buffer) - the tinyalsa implementation follows this change Cc: Phil Burk <philburk(a)google.com> Cc: Zach Riggle <riggle(a)google.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Leo Yan <leo.yan(a)linaro.org> Cc: Baolin Wang <baolin.wang(a)linaro.org> Jaroslav Kysela (2): ALSA: pcm: implement the anonymous dup (inode file descriptor) ALSA: pcm: implement the mmap buffer mode for the anonymous dup include/sound/pcm.h | 10 +++-- include/uapi/sound/asound.h | 6 ++- sound/core/oss/pcm_oss.c | 2 +- sound/core/pcm.c | 13 +++--- sound/core/pcm_compat.c | 1 + sound/core/pcm_native.c | 97 ++++++++++++++++++++++++++++++++++++++++++--- 6 files changed, 110 insertions(+), 19 deletions(-) -- 2.13.6

4 17

[PATCH v2 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms
by Michal Simek 03 Jun '20

03 Jun '20

Hi, recently we wanted to update xilinx intc driver and we found that function which we wanted to remove is still wired by ancient Xilinx PowerPC platforms. Here is the thread about it. https://lore.kernel.org/linux-next/48d3232d-0f1d-42ea-3109-f44bbabfa2e8@xil… I have been talking about it internally and there is no interest in these platforms and it is also orphan for quite a long time. None is really running/testing these platforms regularly that's why I think it makes sense to remove them also with drivers which are specific to this platform. U-Boot support was removed in 2017 without anybody complain about it https://github.com/Xilinx/u-boot-xlnx/commit/98f705c9cefdfdba62c069821bbba1… Based on current ppc/next. If anyone has any objection about it, please let me know. Thanks, Michal Changes in v2: - Remove also sound/drivers/pcm-indirect2.[ch] files Reported-by: Takashi Iwai <tiwai(a)suse.de> - Based on my chat with Arnd I removed arch/powerpc/xmon/ changes done in v1 to keep them the same as before. (kbuild reported some issues with it too) Michal Simek (2): sound: ac97: Remove sound driver for ancient platform powerpc: Remove Xilinx PPC405/PPC440 support Documentation/devicetree/bindings/xilinx.txt | 143 -- Documentation/powerpc/bootwrapper.rst | 28 +- MAINTAINERS | 6 - arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/boot/Makefile | 7 +- arch/powerpc/boot/dts/Makefile | 1 - arch/powerpc/boot/dts/virtex440-ml507.dts | 406 ------ arch/powerpc/boot/dts/virtex440-ml510.dts | 466 ------- arch/powerpc/boot/ops.h | 1 - arch/powerpc/boot/serial.c | 5 - arch/powerpc/boot/uartlite.c | 79 -- arch/powerpc/boot/virtex.c | 97 -- arch/powerpc/boot/virtex405-head.S | 31 - arch/powerpc/boot/wrapper | 8 - arch/powerpc/configs/40x/virtex_defconfig | 75 - arch/powerpc/configs/44x/virtex5_defconfig | 74 - arch/powerpc/configs/ppc40x_defconfig | 8 - arch/powerpc/configs/ppc44x_defconfig | 8 - arch/powerpc/include/asm/xilinx_intc.h | 16 - arch/powerpc/include/asm/xilinx_pci.h | 21 - arch/powerpc/kernel/cputable.c | 39 - arch/powerpc/platforms/40x/Kconfig | 31 - arch/powerpc/platforms/40x/Makefile | 1 - arch/powerpc/platforms/40x/virtex.c | 54 - arch/powerpc/platforms/44x/Kconfig | 37 - arch/powerpc/platforms/44x/Makefile | 2 - arch/powerpc/platforms/44x/virtex.c | 60 - arch/powerpc/platforms/44x/virtex_ml510.c | 30 - arch/powerpc/platforms/Kconfig | 4 - arch/powerpc/sysdev/Makefile | 2 - arch/powerpc/sysdev/xilinx_intc.c | 88 -- arch/powerpc/sysdev/xilinx_pci.c | 132 -- drivers/char/Kconfig | 2 +- drivers/video/fbdev/Kconfig | 2 +- sound/drivers/Kconfig | 12 - sound/drivers/Makefile | 2 - sound/drivers/ml403-ac97cr.c | 1298 ------------------ sound/drivers/pcm-indirect2.c | 560 -------- sound/drivers/pcm-indirect2.h | 127 -- 39 files changed, 7 insertions(+), 3958 deletions(-) delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts delete mode 100644 arch/powerpc/boot/uartlite.c delete mode 100644 arch/powerpc/boot/virtex.c delete mode 100644 arch/powerpc/boot/virtex405-head.S delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h delete mode 100644 arch/powerpc/platforms/40x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c delete mode 100644 sound/drivers/ml403-ac97cr.c delete mode 100644 sound/drivers/pcm-indirect2.c delete mode 100644 sound/drivers/pcm-indirect2.h -- 2.26.0

5 12

Pioneer DJ DJM-900NXS2 support patches
by Dmitry Panchenko | d-Systems 01 Jun '20

01 Jun '20

Pioneer DJ DJM-900NXS2 is a widely used DJ mixer with 2 audio USB interfaces. Both have a MIDI controller, 10 playback and 12 capture channels. Audio endpoints are vendor-specific and 3 files need to be patched. All playback and capture channels work fine with all supported sample rates (44.1k, 48k, 96k). Patches are attached. -- Kind regards, Dmitry Panchenko d-Systems Ltd Lai 6, Tartu 51005, Estonia www.d-systems.ee

3 5

[PATCH 0/4] Kconfig updates for DMIC and SOF HDMI support
by Ranjani Sridharan 28 May '20

28 May '20

This series provides the following updtes to the Intel machine driver Kconfig: 1. The first patch adds the explicit dependency on GPIOLIB when SND_SOC_DMIC is selected. 2. SND_SOC_SOF_HDA_AUDIO_CODEC is required for using the legacy HDA codec driver for HDMI support in SOF. The last 3 three patches make the required changes to account for this. Libin Yang (3): ASoC: intel: add depends on SND_SOC_SOF_HDA_AUDIO_CODEC for common hdmi ASoC: sof-sdw: remove CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC condition ASoC: sof_pcm512x: remove CONFIG_SND_HDA_CODEC_HDMI condition Pierre-Louis Bossart (1): ASoC: Intel: boards: add explicit dependency on GPIOLIB when DMIC is used sound/soc/intel/boards/Kconfig | 51 ++++++++++++++------------- sound/soc/intel/boards/sof_pcm512x.c | 9 ----- sound/soc/intel/boards/sof_sdw.c | 8 ----- sound/soc/intel/boards/sof_sdw_hdmi.c | 7 ---- 4 files changed, 26 insertions(+), 49 deletions(-) -- 2.17.1

3 9

[PATCH RESEND 0/4] Minor WM8994 MFD/codec fixes
by Marek Szyprowski 22 May '20

22 May '20

Hi! This is a resend of the minor WM8994 MFD/codec driver fixes posted in last days of the February 2020: https://lore.kernel.org/patchwork/project/lkml/list/?series=431296 https://lore.kernel.org/patchwork/project/lkml/list/?series=431721 I hope this time the patches will find their way to mainline. Best regards, Marek Szyprowski Patch summary: Marek Szyprowski (4): mfd: wm8994: Fix driver operation if loaded as modules mfd: wm8994: Fix unbalanced calls to regulator_bulk_disable() mfd: wm8994: Silence warning about supplies during deferred probe ASoC: wm8994: Silence warnings during deferred probe drivers/mfd/wm8994-core.c | 8 +++++++- sound/soc/codecs/wm8994.c | 3 ++- 2 files changed, 9 insertions(+), 2 deletions(-) -- 2.17.1

4 17

[PATCH 0/2] powerpc: Remove support for ppc405/440 Xilinx platforms
by Michal Simek 21 May '20

21 May '20

Hi, recently we wanted to update xilinx intc driver and we found that function which we wanted to remove is still wired by ancient Xilinx PowerPC platforms. Here is the thread about it. https://lore.kernel.org/linux-next/48d3232d-0f1d-42ea-3109-f44bbabfa2e8@xil… I have been talking about it internally and there is no interest in these platforms and it is also orphan for quite a long time. None is really running/testing these platforms regularly that's why I think it makes sense to remove them also with drivers which are specific to this platform. U-Boot support was removed in 2017 without anybody complain about it https://github.com/Xilinx/u-boot-xlnx/commit/98f705c9cefdfdba62c069821bbba1… Based on current ppc/next. If anyone has any objection about it, please let me know. Thanks, Michal Michal Simek (2): sound: ac97: Remove sound driver for ancient platform powerpc: Remove Xilinx PPC405/PPC440 support Documentation/devicetree/bindings/xilinx.txt | 143 -- Documentation/powerpc/bootwrapper.rst | 28 +- MAINTAINERS | 6 - arch/powerpc/Kconfig.debug | 2 +- arch/powerpc/boot/Makefile | 7 +- arch/powerpc/boot/dts/Makefile | 1 - arch/powerpc/boot/dts/virtex440-ml507.dts | 406 ------ arch/powerpc/boot/dts/virtex440-ml510.dts | 466 ------- arch/powerpc/boot/ops.h | 1 - arch/powerpc/boot/serial.c | 5 - arch/powerpc/boot/uartlite.c | 79 -- arch/powerpc/boot/virtex.c | 97 -- arch/powerpc/boot/virtex405-head.S | 31 - arch/powerpc/boot/wrapper | 8 - arch/powerpc/configs/40x/virtex_defconfig | 75 - arch/powerpc/configs/44x/virtex5_defconfig | 74 - arch/powerpc/configs/ppc40x_defconfig | 8 - arch/powerpc/configs/ppc44x_defconfig | 8 - arch/powerpc/include/asm/xilinx_intc.h | 16 - arch/powerpc/include/asm/xilinx_pci.h | 21 - arch/powerpc/kernel/cputable.c | 39 - arch/powerpc/platforms/40x/Kconfig | 31 - arch/powerpc/platforms/40x/Makefile | 1 - arch/powerpc/platforms/40x/virtex.c | 54 - arch/powerpc/platforms/44x/Kconfig | 37 - arch/powerpc/platforms/44x/Makefile | 2 - arch/powerpc/platforms/44x/virtex.c | 60 - arch/powerpc/platforms/44x/virtex_ml510.c | 30 - arch/powerpc/platforms/Kconfig | 4 - arch/powerpc/sysdev/Makefile | 2 - arch/powerpc/sysdev/xilinx_intc.c | 88 -- arch/powerpc/sysdev/xilinx_pci.c | 132 -- arch/powerpc/xmon/ppc-dis.c | 6 - arch/powerpc/xmon/ppc-opc.c | 23 - arch/powerpc/xmon/ppc.h | 5 - drivers/char/Kconfig | 2 +- drivers/video/fbdev/Kconfig | 2 +- sound/drivers/Kconfig | 12 - sound/drivers/Makefile | 2 - sound/drivers/ml403-ac97cr.c | 1298 ------------------ 40 files changed, 7 insertions(+), 3305 deletions(-) delete mode 100644 arch/powerpc/boot/dts/virtex440-ml507.dts delete mode 100644 arch/powerpc/boot/dts/virtex440-ml510.dts delete mode 100644 arch/powerpc/boot/uartlite.c delete mode 100644 arch/powerpc/boot/virtex.c delete mode 100644 arch/powerpc/boot/virtex405-head.S delete mode 100644 arch/powerpc/configs/40x/virtex_defconfig delete mode 100644 arch/powerpc/configs/44x/virtex5_defconfig delete mode 100644 arch/powerpc/include/asm/xilinx_intc.h delete mode 100644 arch/powerpc/include/asm/xilinx_pci.h delete mode 100644 arch/powerpc/platforms/40x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex.c delete mode 100644 arch/powerpc/platforms/44x/virtex_ml510.c delete mode 100644 arch/powerpc/sysdev/xilinx_intc.c delete mode 100644 arch/powerpc/sysdev/xilinx_pci.c delete mode 100644 sound/drivers/ml403-ac97cr.c -- 2.26.0

10 29

[PATCH 1/5] drivers/powerpc: Replace _ALIGN_UP() by ALIGN()
by Christophe Leroy 20 May '20

20 May '20

_ALIGN_UP() is specific to powerpc ALIGN() is generic and does the same Replace _ALIGN_UP() by ALIGN() Signed-off-by: Christophe Leroy <christophe.leroy(a)c-s.fr> --- drivers/ps3/ps3-lpm.c | 6 +++--- drivers/vfio/pci/vfio_pci_nvlink2.c | 2 +- drivers/video/fbdev/ps3fb.c | 4 ++-- sound/ppc/snd_ps3.c | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c index 83c45659bc9d..064b5884ba13 100644 --- a/drivers/ps3/ps3-lpm.c +++ b/drivers/ps3/ps3-lpm.c @@ -1096,8 +1096,8 @@ int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, lpm_priv->tb_cache_internal = NULL; lpm_priv->tb_cache = NULL; } else if (tb_cache) { - if (tb_cache != (void *)_ALIGN_UP((unsigned long)tb_cache, 128) - || tb_cache_size != _ALIGN_UP(tb_cache_size, 128)) { + if (tb_cache != (void *)ALIGN((unsigned long)tb_cache, 128) + || tb_cache_size != ALIGN(tb_cache_size, 128)) { dev_err(sbd_core(), "%s:%u: unaligned tb_cache\n", __func__, __LINE__); result = -EINVAL; @@ -1116,7 +1116,7 @@ int ps3_lpm_open(enum ps3_lpm_tb_type tb_type, void *tb_cache, result = -ENOMEM; goto fail_malloc; } - lpm_priv->tb_cache = (void *)_ALIGN_UP( + lpm_priv->tb_cache = (void *)ALIGN( (unsigned long)lpm_priv->tb_cache_internal, 128); } diff --git a/drivers/vfio/pci/vfio_pci_nvlink2.c b/drivers/vfio/pci/vfio_pci_nvlink2.c index ed20d73cc27c..65c61710c0e9 100644 --- a/drivers/vfio/pci/vfio_pci_nvlink2.c +++ b/drivers/vfio/pci/vfio_pci_nvlink2.c @@ -67,7 +67,7 @@ static size_t vfio_pci_nvgpu_rw(struct vfio_pci_device *vdev, * * This is not fast path anyway. */ - sizealigned = _ALIGN_UP(posoff + count, PAGE_SIZE); + sizealigned = ALIGN(posoff + count, PAGE_SIZE); ptr = ioremap_cache(data->gpu_hpa + posaligned, sizealigned); if (!ptr) return -EFAULT; diff --git a/drivers/video/fbdev/ps3fb.c b/drivers/video/fbdev/ps3fb.c index 834f63edf700..9df78fb77267 100644 --- a/drivers/video/fbdev/ps3fb.c +++ b/drivers/video/fbdev/ps3fb.c @@ -44,7 +44,7 @@ #define GPU_CMD_BUF_SIZE (2 * 1024 * 1024) #define GPU_FB_START (64 * 1024) #define GPU_IOIF (0x0d000000UL) -#define GPU_ALIGN_UP(x) _ALIGN_UP((x), 64) +#define GPU_ALIGN_UP(x) ALIGN((x), 64) #define GPU_MAX_LINE_LENGTH (65536 - 64) #define GPU_INTR_STATUS_VSYNC_0 0 /* vsync on head A */ @@ -1015,7 +1015,7 @@ static int ps3fb_probe(struct ps3_system_bus_device *dev) } #endif - max_ps3fb_size = _ALIGN_UP(GPU_IOIF, 256*1024*1024) - GPU_IOIF; + max_ps3fb_size = ALIGN(GPU_IOIF, 256*1024*1024) - GPU_IOIF; if (ps3fb_videomemory.size > max_ps3fb_size) { dev_info(&dev->core, "Limiting ps3fb mem size to %lu bytes\n", max_ps3fb_size); diff --git a/sound/ppc/snd_ps3.c b/sound/ppc/snd_ps3.c index 6d2a33b8faa0..b8161a08f2ca 100644 --- a/sound/ppc/snd_ps3.c +++ b/sound/ppc/snd_ps3.c @@ -926,7 +926,7 @@ static int snd_ps3_driver_probe(struct ps3_system_bus_device *dev) PAGE_SHIFT, /* use system page size */ 0, /* dma type; not used */ NULL, - _ALIGN_UP(SND_PS3_DMA_REGION_SIZE, PAGE_SIZE)); + ALIGN(SND_PS3_DMA_REGION_SIZE, PAGE_SIZE)); dev->d_region->ioid = PS3_AUDIO_IOID; ret = ps3_dma_region_create(dev->d_region); -- 2.25.0

4 11