February 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: SOF: Intel: Fix stream cleanup on pcm close
by Cezary Rojewski 12 Mar '20

12 Mar '20

Field "substream" gets assigned during stream setup in hda_dsp_pcm_hw_params() but it is never cleared afterwards during hda_dsp_pcm_close(). Now, any non-pcm operation e.g.: compress can mistakenly make use of that pointer as it's bypassing all "if (s->substream)" checks. Nulling the pointer during close operation ensures no wild pointers are left behind. Fixes: cdae3b9a47aa ("ASoC: SOF: Intel: Add Intel specific HDA PCM operations") Signed-off-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- sound/soc/sof/intel/hda-pcm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/sof/intel/hda-pcm.c b/sound/soc/sof/intel/hda-pcm.c index a46a6baa1c3f..4b3a89cf20e7 100644 --- a/sound/soc/sof/intel/hda-pcm.c +++ b/sound/soc/sof/intel/hda-pcm.c @@ -246,5 +246,6 @@ int hda_dsp_pcm_close(struct snd_sof_dev *sdev, /* unbinding pcm substream to hda stream */ substream->runtime->private_data = NULL; + hstream->substream = NULL; return 0; } -- 2.17.1

2 4

[alsa-devel] [PATCH v3] ASoC: dt-bindings: stm32: convert spdfirx to json-schema
by Olivier Moysan 11 Mar '20

11 Mar '20

Convert the STM32 SPDIFRX bindings to DT schema format using json-schema. Signed-off-by: Olivier Moysan <olivier.moysan(a)st.com> --- Changes in v2: - Add "additionalProperties: false" - Also change minItems to 2 for dmas property, as both DMAs are required. Changes in v3: - Drop minItems/maxItems for dmas property, remove ref to stm32-dma.txt. --- .../bindings/sound/st,stm32-spdifrx.txt | 56 ------------- .../bindings/sound/st,stm32-spdifrx.yaml | 80 +++++++++++++++++++ 2 files changed, 80 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt deleted file mode 100644 index 33826f2459fa..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt +++ /dev/null @@ -1,56 +0,0 @@ -STMicroelectronics STM32 S/PDIF receiver (SPDIFRX). - -The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with -IEC-60958 and IEC-61937. - -Required properties: - - compatible: should be "st,stm32h7-spdifrx" - - reg: cpu DAI IP base address and size - - clocks: must contain an entry for kclk (used as S/PDIF signal reference) - - clock-names: must contain "kclk" - - interrupts: cpu DAI interrupt line - - dmas: DMA specifiers for audio data DMA and iec control flow DMA - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt - - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" - -Optional properties: - - resets: Reference to a reset controller asserting the SPDIFRX - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -spdifrx: spdifrx@40004000 { - compatible = "st,stm32h7-spdifrx"; - reg = <0x40004000 0x400>; - clocks = <&rcc SPDIFRX_CK>; - clock-names = "kclk"; - interrupts = <97>; - dmas = <&dmamux1 2 93 0x400 0x0>, - <&dmamux1 3 94 0x400 0x0>; - dma-names = "rx", "rx-ctrl"; - pinctrl-0 = <&spdifrx_pins>; - pinctrl-names = "default"; - - spdifrx_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - }; - }; -}; - -spdif_in: spdif-in { - compatible = "linux,spdif-dir"; - - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; - -soundcard { - compatible = "audio-graph-card"; - dais = <&spdifrx_port>; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml new file mode 100644 index 000000000000..b7f7dc452231 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX) + +maintainers: + - Olivier Moysan <olivier.moysan(a)st.com> + +description: | + The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with + IEC-60958 and IEC-61937. + +properties: + compatible: + enum: + - st,stm32h7-spdifrx + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: kclk + + interrupts: + maxItems: 1 + + dmas: + items: + - description: audio data capture DMA + - description: IEC status bits capture DMA + + dma-names: + items: + - const: rx + - const: rx-ctrl + + resets: + maxItems: 1 + +required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - interrupts + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + spdifrx: spdifrx@40004000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x40004000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 2 93 0x400 0x0>, + <&dmamux1 3 94 0x400 0x0>; + dma-names = "rx", "rx-ctrl"; + pinctrl-0 = <&spdifrx_pins>; + pinctrl-names = "default"; + }; + +... -- 2.17.1

3 6

[alsa-devel] [PATCH alsa-ucm-conf] bytcht-es8316: Fix missing including of HeadPhones.conf after ucm2 conversion
by Hans de Goede 07 Mar '20

07 Mar '20

The conversion to ucm2 format missed adding an include for: codecs/es8316/HeadPhones.conf Leading to no sound on the headphones output, this commit adds the missing include fixing this. Cc: youling 257 <youling257(a)gmail.com> Reported-by: youling 257 <youling257(a)gmail.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- ucm2/bytcht-es8316/HiFi-Components.conf | 2 ++ ucm2/bytcht-es8316/HiFi-LongName.conf | 2 ++ 2 files changed, 4 insertions(+) diff --git a/ucm2/bytcht-es8316/HiFi-Components.conf b/ucm2/bytcht-es8316/HiFi-Components.conf index 314d355..c40bd49 100644 --- a/ucm2/bytcht-es8316/HiFi-Components.conf +++ b/ucm2/bytcht-es8316/HiFi-Components.conf @@ -20,6 +20,8 @@ If.mono { } } +<codecs/es8316/HeadPhones.conf> + If.in1 { Condition { Type String diff --git a/ucm2/bytcht-es8316/HiFi-LongName.conf b/ucm2/bytcht-es8316/HiFi-LongName.conf index ea7d1c3..03cf17b 100644 --- a/ucm2/bytcht-es8316/HiFi-LongName.conf +++ b/ucm2/bytcht-es8316/HiFi-LongName.conf @@ -20,6 +20,8 @@ If.mono { } } +<codecs/es8316/HeadPhones.conf> + If.in1 { Condition { Type String -- 2.24.1

3 3

[PATCH] ALSA: dmaengine_pcm: No need to take runtime reference twice in pcm_pointer
by Peter Ujfalusi 06 Mar '20

06 Mar '20

The runtime pointer has been taken in functional level so there is no need to take it again under the if () case. Fixes: 9d789dc047e3 ("ALSA: dmaengine_pcm: Consider DMA cache caused delay in pointer callback") Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> --- Hi Mark, it looks like that the DMA caused delay reporting patch went in in two pieces: fa1f875c120f ALSA: dmaengine_pcm: Consider DMA cache caused delay in pointer callback 9d789dc047e3 ALSA: dmaengine_pcm: Consider DMA cache caused delay in pointer callback and the second one missed removing the runtime pointer initialization from the if () case. Regards, Peter sound/core/pcm_dmaengine.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c index 6f1507f992d1..4d059ff2b2e4 100644 --- a/sound/core/pcm_dmaengine.c +++ b/sound/core/pcm_dmaengine.c @@ -248,8 +248,6 @@ snd_pcm_uframes_t snd_dmaengine_pcm_pointer(struct snd_pcm_substream *substream) status = dmaengine_tx_status(prtd->dma_chan, prtd->cookie, &state); if (status == DMA_IN_PROGRESS || status == DMA_PAUSED) { - struct snd_pcm_runtime *runtime = substream->runtime; - buf_size = snd_pcm_lib_buffer_bytes(substream); if (state.residue > 0 && state.residue <= buf_size) pos = buf_size - state.residue; -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

2 1

[PATCH] ALSA: usb-audio: Add support for MOTU MicroBook IIc
by Alexander Tsoy 06 Mar '20

06 Mar '20

MicroBook IIc operates in UAC2 mode by default. This patch addresses several issues with it: - MicroBook II and IIc shares the same USB ID. We can distinguish them by interface class. - MaxPacketsOnly attribute is erroneously set in endpoint descriptors. As a result this card produces noise with all sample rates other than 96 KHz. This also causes issues like IOMMU page faults and other problems with host controller. - Sample rate changes takes more than 2 seconds for this device. Clock validity request returns false during that period, so the clock validity quirk is required. Signed-off-by: Alexander Tsoy <alexander(a)tsoy.me> --- sound/usb/clock.c | 59 ++++++++++++++++++++++++++++++++-------- sound/usb/pcm.c | 7 ++++- sound/usb/quirks-table.h | 2 +- sound/usb/quirks.c | 18 +++++++++++- 4 files changed, 72 insertions(+), 14 deletions(-) diff --git a/sound/usb/clock.c b/sound/usb/clock.c index a48313dfa967..b118cf97607f 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -151,16 +151,15 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i return ret; } -/* - * Assume the clock is valid if clock source supports only one single sample - * rate, the terminal is connected directly to it (there is no clock selector) - * and clock type is internal. This is to deal with some Denon DJ controllers - * that always reports that clock is invalid. - */ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, struct audioformat *fmt, int source_id) { + bool ret = false; + int count; + unsigned char data; + struct usb_device *dev = chip->dev; + if (fmt->protocol == UAC_VERSION_2) { struct uac_clock_source_descriptor *cs_desc = snd_usb_find_clock_source(chip->ctrl_intf, source_id); @@ -168,13 +167,51 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, if (!cs_desc) return false; - return (fmt->nr_rates == 1 && - (fmt->clock & 0xff) == cs_desc->bClockID && - (cs_desc->bmAttributes & 0x3) != - UAC_CLOCK_SOURCE_TYPE_EXT); + /* + * Assume the clock is valid if clock source supports only one + * single sample rate, the terminal is connected directly to it + * (there is no clock selector) and clock type is internal. + * This is to deal with some Denon DJ controllers that always + * reports that clock is invalid. + */ + if (fmt->nr_rates == 1 && + (fmt->clock & 0xff) == cs_desc->bClockID && + (cs_desc->bmAttributes & 0x3) != + UAC_CLOCK_SOURCE_TYPE_EXT) + return true; + } + + /* + * MOTU MicroBook IIc + * Sample rate changes takes more than 2 seconds for this device. Clock + * validity request returns false during that period. + */ + if (chip->usb_id == USB_ID(0x07fd, 0x0004)) { + count = 0; + + while ((!ret) && (count < 50)) { + int err; + + msleep(100); + + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_CLOCK_VALID << 8, + snd_usb_ctrl_intf(chip) | (source_id << 8), + &data, sizeof(data)); + if (err < 0) { + dev_warn(&dev->dev, + "%s(): cannot get clock validity for id %d\n", + __func__, source_id); + return false; + } + + ret = !!data; + count++; + } } - return false; + return ret; } static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index bd258f1ec2dd..a4e4064f9aee 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -357,7 +357,12 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ep = 0x81; ifnum = 1; goto add_sync_ep_from_ifnum; - case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ + case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II/IIc */ + /* MicroBook IIc */ + if (altsd->bInterfaceClass == USB_CLASS_AUDIO) + return 0; + + /* MicroBook II */ ep = 0x84; ifnum = 0; goto add_sync_ep_from_ifnum; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index d187aa6d50db..1c8719292eee 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3472,7 +3472,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), }, /* MOTU Microbook II */ { - USB_DEVICE(0x07fd, 0x0004), + USB_DEVICE_VENDOR_SPEC(0x07fd, 0x0004), .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { .vendor_name = "MOTU", .product_name = "MicroBookII", diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 7f558f4b4520..a7bd32bd301c 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1316,7 +1316,15 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */ return snd_usb_axefx3_boot_quirk(dev); case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ - return snd_usb_motu_microbookii_boot_quirk(dev); + /* + * For some reason interface 3 with vendor-spec class is + * detected on MicroBook IIc. + */ + if (get_iface_desc(intf->altsetting)->bInterfaceClass == + USB_CLASS_VENDOR_SPEC && + get_iface_desc(intf->altsetting)->bInterfaceNumber < 3) + return snd_usb_motu_microbookii_boot_quirk(dev); + break; } return 0; @@ -1754,5 +1762,13 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, else fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; break; + case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook IIc */ + /* + * MaxPacketsOnly attribute is erroneously set in endpoint + * descriptors. As a result this card produces noise with + * all sample rates other than 96 KHz. + */ + fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX; + break; } } -- 2.24.1

2 1

[PATCH] sound: korg1212: fix if-statement empty body warnings
by Randy Dunlap 06 Mar '20

06 Mar '20

From: Randy Dunlap <rdunlap(a)infradead.org> Fix gcc warnings when -Wextra is used by using an empty do-while block instead of <nothing>. Fixes these build warnings: ../sound/pci/korg1212/korg1212.c:674:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:708:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:730:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:853:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1013:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1035:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1052:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1066:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1087:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1094:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:1208:43: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] ../sound/pci/korg1212/korg1212.c:2360:102: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Cc: Jaroslav Kysela <perex(a)perex.cz> Cc: Takashi Iwai <tiwai(a)suse.com> Cc: alsa-devel(a)alsa-project.org --- sound/pci/korg1212/korg1212.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- linux-next-20200225.orig/sound/pci/korg1212/korg1212.c +++ linux-next-20200225/sound/pci/korg1212/korg1212.c @@ -30,7 +30,7 @@ #if K1212_DEBUG_LEVEL > 0 #define K1212_DEBUG_PRINTK(fmt,args...) printk(KERN_DEBUG fmt,##args) #else -#define K1212_DEBUG_PRINTK(fmt,...) +#define K1212_DEBUG_PRINTK(fmt,...) do { } while (0) #endif #if K1212_DEBUG_LEVEL > 1 #define K1212_DEBUG_PRINTK_VERBOSE(fmt,args...) printk(KERN_DEBUG fmt,##args)

2 1

[PATCH] ALSA: hda/realtek - Enable the headset of ASUS B9450FA with ALC294
by Jian-Hong Pan 05 Mar '20

05 Mar '20

A headset on the laptop like ASUS B9450FA does not work, until quirk ALC294_FIXUP_ASUS_HPE is applied. Signed-off-by: Jian-Hong Pan <jian-hong(a)endlessm.com> Singed-off-by: Kailang Yang <kailang(a)realtek.com> --- sound/pci/hda/patch_realtek.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 477589e7ec1d..a47f6404aea9 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5920,7 +5920,7 @@ enum { ALC289_FIXUP_DUAL_SPK, ALC294_FIXUP_SPK2_TO_DAC1, ALC294_FIXUP_ASUS_DUAL_SPK, - + ALC294_FIXUP_ASUS_HPE, }; static const struct hda_fixup alc269_fixups[] = { @@ -7040,7 +7040,17 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC294_FIXUP_SPK2_TO_DAC1 }, - + [ALC294_FIXUP_ASUS_HPE] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* Set EAPD high */ + { 0x20, AC_VERB_SET_COEF_INDEX, 0x0f }, + { 0x20, AC_VERB_SET_PROC_COEF, 0x7774 }, + { } + }, + .chained = true, + .chain_id = ALC294_FIXUP_ASUS_HEADSET_MIC + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -7204,6 +7214,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x17d1, "ASUS UX431FL", ALC294_FIXUP_ASUS_DUAL_SPK), SND_PCI_QUIRK(0x1043, 0x18b1, "Asus MJ401TA", ALC256_FIXUP_ASUS_HEADSET_MIC), + SND_PCI_QUIRK(0x1043, 0x19ce, "ASUS B9450FA", ALC294_FIXUP_ASUS_HPE), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x1a30, "ASUS X705UD", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), -- 2.25.1

2 1

Enable Headset Button for ThinkPad X1
by Kailang 05 Mar '20

05 Mar '20

Hi Takashi, Lenovo ThinkPad X1 want to support Headset Button. Attach patch will enable it. BR, Kailang

2 1

RE: Enable Headset Mic for Dell desktop
by Kailang 05 Mar '20

05 Mar '20

Sorry! Forgot attach file. > -----Original Message----- > From: Kailang > Sent: Thursday, February 20, 2020 4:30 PM > To: Takashi Iwai (tiwai(a)suse.de) <tiwai(a)suse.de> > Cc: (alsa-devel(a)alsa-project.org) <alsa-devel(a)alsa-project.org> > Subject: Enable Headset Mic for Dell desktop > > Hi Takashi, > > Attach patch was supported headset Mic. > > BR, > Kailang

2 1

[PATCH v2 0/8] ASoC: soc-pcm cleanup step5
by Kuninori Morimoto 05 Mar '20

05 Mar '20

Hi Mark These are v2 of soc-pcm cleanup step5. These are based on latest for-5.7 branch. Mainly v2 fixed the points reviewed in v1. [7/8] patch might exchange the behavior Kuninori Morimoto (8): 1) ASoC: soc-pcm: use defined stream 2) ASoC: soc-pcm: remove duplicate be check from dpcm_add_paths() 3) ASoC: soc-pcm: move dpcm_fe_dai_close() 4) ASoC: soc-pcm: add dpcm_fe_dai_cleanup() 5) ASoC: soc-pcm: use snd_soc_dai_get_pcm_stream() at dpcm_set_fe_runtime() 6) ASoC: soc-pcm: check DAI's activity more simply 7) ASoC: soc-pcm: Do Digital Mute for both CPU/Codec in same timing. 8) ASoC: soc-pcm: tidyup dulicate handing at dpcm_fe_dai_startup() sound/soc/soc-pcm.c | 114 +++++++++++++++++++------------------------- 1 file changed, 50 insertions(+), 64 deletions(-) -- 2.17.1

2 12