December 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH] ASoC: wm_adsp: Improve handling of raw byte streams
by Richard Fitzgerald 28 Dec '20

28 Dec '20

As the register map is 16-bit or 32-bit big-endian, the 24-bit DSP words appear padded and with the bytes swapped. When reading a raw stream of bytes, the pad bytes must be removed and the data bytes swapped back to their original order. The previous implementation of this assumed that the be32_to_cpu() in wm_adsp_read_data_block() would swap back to little-endian. But this is obviously only true on a little-endian CPU. It also made two walks through the data, once to endian-swap and again to strip the pad bytes. This patch re-works the code so that the endian-swap and unpad are done together in a single walk, and it is not dependent on the endianness of the CPU. The data_word_size argument to wm_adsp_remove_padding() has been dropped because currently this is always 3. Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> --- sound/soc/codecs/wm_adsp.c | 55 +++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 25 deletions(-) diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index bcf18bf15a02..7c52ada10af3 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -3662,12 +3662,12 @@ int wm_adsp_compr_get_caps(struct snd_soc_component *component, } EXPORT_SYMBOL_GPL(wm_adsp_compr_get_caps); -static int wm_adsp_read_data_block(struct wm_adsp *dsp, int mem_type, - unsigned int mem_addr, - unsigned int num_words, u32 *data) +static int wm_adsp_read_raw_data_block(struct wm_adsp *dsp, int mem_type, + unsigned int mem_addr, + unsigned int num_words, __be32 *data) { struct wm_adsp_region const *mem = wm_adsp_find_region(dsp, mem_type); - unsigned int i, reg; + unsigned int reg; int ret; if (!mem) @@ -3680,16 +3680,22 @@ static int wm_adsp_read_data_block(struct wm_adsp *dsp, int mem_type, if (ret < 0) return ret; - for (i = 0; i < num_words; ++i) - data[i] = be32_to_cpu(data[i]) & 0x00ffffffu; - return 0; } static inline int wm_adsp_read_data_word(struct wm_adsp *dsp, int mem_type, unsigned int mem_addr, u32 *data) { - return wm_adsp_read_data_block(dsp, mem_type, mem_addr, 1, data); + __be32 raw; + int ret; + + ret = wm_adsp_read_raw_data_block(dsp, mem_type, mem_addr, 1, &raw); + if (ret) + return ret; + + *data = be32_to_cpu(raw) & 0x00ffffffu; + + return 0; } static int wm_adsp_write_data_word(struct wm_adsp *dsp, int mem_type, @@ -3722,18 +3728,22 @@ static inline int wm_adsp_buffer_write(struct wm_adsp_compr_buf *buf, buf->host_buf_ptr + field_offset, data); } -static void wm_adsp_remove_padding(u32 *buf, int nwords, int data_word_size) +static void wm_adsp_remove_padding(u32 *buf, int nwords) { - u8 *pack_in = (u8 *)buf; + const __be32 *pack_in = (__be32 *)buf; u8 *pack_out = (u8 *)buf; - int i, j; + int i; - /* Remove the padding bytes from the data read from the DSP */ + /* + * DSP words from the register map have pad bytes and the data bytes + * are in swapped order. This swaps back to the original little-endian + * order and strips the pad bytes. + */ for (i = 0; i < nwords; i++) { - for (j = 0; j < data_word_size; j++) - *pack_out++ = *pack_in++; - - pack_in += sizeof(*buf) - data_word_size; + u32 word = be32_to_cpu(*pack_in++); + *pack_out++ = (u8)word; + *pack_out++ = (u8)(word >> 8); + *pack_out++ = (u8)(word >> 16); } } @@ -3917,12 +3927,7 @@ static int wm_adsp_buffer_parse_coeff(struct wm_coeff_ctl *ctl) return -EINVAL; } - for (i = 0; i < ARRAY_SIZE(coeff_v1.name); i++) - coeff_v1.name[i] = be32_to_cpu(coeff_v1.name[i]); - - wm_adsp_remove_padding((u32 *)&coeff_v1.name, - ARRAY_SIZE(coeff_v1.name), - WM_ADSP_DATA_WORD_SIZE); + wm_adsp_remove_padding((u32 *)&coeff_v1.name, ARRAY_SIZE(coeff_v1.name)); buf->name = kasprintf(GFP_KERNEL, "%s-dsp-%s", ctl->dsp->part, (char *)&coeff_v1.name); @@ -4261,12 +4266,12 @@ static int wm_adsp_buffer_capture_block(struct wm_adsp_compr *compr, int target) return 0; /* Read data from DSP */ - ret = wm_adsp_read_data_block(buf->dsp, mem_type, adsp_addr, - nwords, compr->raw_buf); + ret = wm_adsp_read_raw_data_block(buf->dsp, mem_type, adsp_addr, + nwords, compr->raw_buf); if (ret < 0) return ret; - wm_adsp_remove_padding(compr->raw_buf, nwords, WM_ADSP_DATA_WORD_SIZE); + wm_adsp_remove_padding(compr->raw_buf, nwords); /* update read index to account for words read */ buf->read_index += nwords; -- 2.20.1

3 2

[PATCH v2] catpt: Switch to use list_entry_is_head() helper
by Andy Shevchenko 28 Dec '20

28 Dec '20

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski(a)intel.com> --- v2: left the structure definition at its initial location (Cezary) sound/soc/intel/catpt/pcm.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/catpt/pcm.c b/sound/soc/intel/catpt/pcm.c index e5d54bb1c42a..9d304b3a817f 100644 --- a/sound/soc/intel/catpt/pcm.c +++ b/sound/soc/intel/catpt/pcm.c @@ -331,7 +331,7 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, { struct catpt_dev *cdev = dev_get_drvdata(dai->dev); struct snd_soc_component *component = dai->component; - struct snd_kcontrol *pos, *kctl = NULL; + struct snd_kcontrol *pos; const char *name; int ret; u32 id = stream->info.stream_hw_id; @@ -356,17 +356,15 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, list_for_each_entry(pos, &component->card->snd_card->controls, list) { if (pos->private_data == component && - !strncmp(name, pos->id.name, sizeof(pos->id.name))) { - kctl = pos; + !strncmp(name, pos->id.name, sizeof(pos->id.name))) break; - } } - if (!kctl) + if (list_entry_is_head(pos, &component->card->snd_card->controls, list)) return -ENOENT; if (stream->template->type != CATPT_STRM_TYPE_LOOPBACK) - return catpt_set_dspvol(cdev, id, (long *)kctl->private_value); - ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)kctl->private_value); + return catpt_set_dspvol(cdev, id, (long *)pos->private_value); + ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)pos->private_value); if (ret) return CATPT_IPC_ERROR(ret); return 0; -- 2.29.2

2 2

[PATCH v1] ASoC: sprd: Switch to use list_entry_is_head() helper
by Andy Shevchenko 28 Dec '20

28 Dec '20

Since we got list_entry_is_head() helper in the generic header, we may switch driver to use it. This eliminates the need in additional variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- sound/soc/sprd/sprd-mcdt.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/sprd/sprd-mcdt.c b/sound/soc/sprd/sprd-mcdt.c index f439e5503a3c..34b2ce733b54 100644 --- a/sound/soc/sprd/sprd-mcdt.c +++ b/sound/soc/sprd/sprd-mcdt.c @@ -866,23 +866,23 @@ EXPORT_SYMBOL_GPL(sprd_mcdt_chan_dma_disable); struct sprd_mcdt_chan *sprd_mcdt_request_chan(u8 channel, enum sprd_mcdt_channel_type type) { - struct sprd_mcdt_chan *temp, *chan = NULL; + struct sprd_mcdt_chan *temp; mutex_lock(&sprd_mcdt_list_mutex); list_for_each_entry(temp, &sprd_mcdt_chan_list, list) { if (temp->type == type && temp->id == channel) { - chan = temp; + list_del_init(&temp->list); break; } } - if (chan) - list_del(&chan->list); + if (list_entry_is_head(temp, &sprd_mcdt_chan_list, list)) + temp = NULL; mutex_unlock(&sprd_mcdt_list_mutex); - return chan; + return temp; } EXPORT_SYMBOL_GPL(sprd_mcdt_request_chan); -- 2.29.2

2 1

[PATCH v1] catpt: Switch to use list_entry_is_head() helper
by Andy Shevchenko 28 Dec '20

28 Dec '20

Since we got list_entry_is_head() helper in the generic header, we may switch catpt to use it. It removes the need in additional variable. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- sound/soc/intel/catpt/pcm.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/sound/soc/intel/catpt/pcm.c b/sound/soc/intel/catpt/pcm.c index e5d54bb1c42a..1c7260db3238 100644 --- a/sound/soc/intel/catpt/pcm.c +++ b/sound/soc/intel/catpt/pcm.c @@ -331,10 +331,10 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, { struct catpt_dev *cdev = dev_get_drvdata(dai->dev); struct snd_soc_component *component = dai->component; - struct snd_kcontrol *pos, *kctl = NULL; const char *name; int ret; u32 id = stream->info.stream_hw_id; + struct snd_kcontrol *pos; /* only selected streams have individual controls */ switch (id) { @@ -356,17 +356,15 @@ static int catpt_dai_apply_usettings(struct snd_soc_dai *dai, list_for_each_entry(pos, &component->card->snd_card->controls, list) { if (pos->private_data == component && - !strncmp(name, pos->id.name, sizeof(pos->id.name))) { - kctl = pos; + !strncmp(name, pos->id.name, sizeof(pos->id.name))) break; - } } - if (!kctl) + if (list_entry_is_head(pos, &component->card->snd_card->controls, list)) return -ENOENT; if (stream->template->type != CATPT_STRM_TYPE_LOOPBACK) - return catpt_set_dspvol(cdev, id, (long *)kctl->private_value); - ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)kctl->private_value); + return catpt_set_dspvol(cdev, id, (long *)pos->private_value); + ret = catpt_ipc_mute_loopback(cdev, id, *(bool *)pos->private_value); if (ret) return CATPT_IPC_ERROR(ret); return 0; -- 2.29.2

3 4

cross-compilation broken since cf09b6742a507555bb712101aff9e919009f0683
by GitHub issues - opened 28 Dec '20

28 Dec '20

alsa-project/alsa-firmware issue #3 was opened from flokli: I was excited to see c9e5b369919a956cf56d50a6f0be076e364f7820 getting merged, but realized this broke immediately afterwards in cf09b6742a507555bb712101aff9e919009f0683: ``` git bisect start # good: [c9e5b369919a956cf56d50a6f0be076e364f7820] Get cross compilation to work git bisect good c9e5b369919a956cf56d50a6f0be076e364f7820 # bad: [3ab9711ae106851b4185da42d5873702a3008744] Release v1.2.4 git bisect bad 3ab9711ae106851b4185da42d5873702a3008744 # bad: [41008541de9bd2b184058ec2204f172e3c9f64fe] introduce Makefile.hotplug git bisect bad 41008541de9bd2b184058ec2204f172e3c9f64fe # bad: [546aa5b30694889b00b424a6e9de2c5f34ce5da2] introduce Makefile.fw_writer git bisect bad 546aa5b30694889b00b424a6e9de2c5f34ce5da2 # bad: [cf09b6742a507555bb712101aff9e919009f0683] upgrade ax_prog_cc_for_build.m4 to serial 18 git bisect bad cf09b6742a507555bb712101aff9e919009f0683 # first bad commit: [cf09b6742a507555bb712101aff9e919009f0683] upgrade ax_prog_cc_for_build.m4 to serial 18 ``` cc @perexg Issue URL : https://github.com/alsa-project/alsa-firmware/issues/3 Repository URL: https://github.com/alsa-project/alsa-firmware

1 0

[PATCH] dt-bindings: Drop redundant maxItems/items
by Rob Herring 28 Dec '20

28 Dec '20

'maxItems' equal to the 'items' list length is redundant. 'maxItems' is preferred for a single entry while greater than 1 should have an 'items' list. A meta-schema check for this is pending once these existing cases are fixed. Cc: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Cc: Vinod Koul <vkoul(a)kernel.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Jassi Brar <jaswinder.singh(a)linaro.org> Cc: dri-devel(a)lists.freedesktop.org Cc: dmaengine(a)vger.kernel.org Cc: alsa-devel(a)alsa-project.org Cc: linux-usb(a)vger.kernel.org Signed-off-by: Rob Herring <robh(a)kernel.org> --- .../devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml | 1 - Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml | 1 - Documentation/devicetree/bindings/mailbox/arm,mhu.yaml | 1 - .../devicetree/bindings/sound/nvidia,tegra30-hda.yaml | 2 -- Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml | 1 - Documentation/devicetree/bindings/usb/renesas,usbhs.yaml | 3 --- 6 files changed, 9 deletions(-) diff --git a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml index 7b9d468c3e52..403d57977ee7 100644 --- a/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml +++ b/Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.yaml @@ -98,7 +98,6 @@ properties: maxItems: 1 dmas: - maxItems: 4 items: - description: Video layer, plane 0 (RGB or luma) - description: Video layer, plane 1 (U/V or U) diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml index b548e4723936..c07eb6f2fc8d 100644 --- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.yaml @@ -73,7 +73,6 @@ properties: maxItems: 1 clock-names: - maxItems: 1 items: - const: fck diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml index d43791a2dde7..d07eb00b97c8 100644 --- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -61,7 +61,6 @@ properties: - description: low-priority non-secure - description: high-priority non-secure - description: Secure - maxItems: 3 clocks: maxItems: 1 diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml index e543a6123792..b55775e21de6 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.yaml @@ -44,7 +44,6 @@ properties: maxItems: 3 clock-names: - maxItems: 3 items: - const: hda - const: hda2hdmi @@ -54,7 +53,6 @@ properties: maxItems: 3 reset-names: - maxItems: 3 items: - const: hda - const: hda2hdmi diff --git a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml index 0f078bd0a3e5..22603256ddf8 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usb-xhci.yaml @@ -51,7 +51,6 @@ properties: maxItems: 1 phy-names: - maxItems: 1 items: - const: usb diff --git a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml index 737c1f47b7de..54c361d4a7af 100644 --- a/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml +++ b/Documentation/devicetree/bindings/usb/renesas,usbhs.yaml @@ -74,11 +74,8 @@ properties: phys: maxItems: 1 - items: - - description: phandle + phy specifier pair. phy-names: - maxItems: 1 items: - const: usb -- 2.27.0

7 9

pulse plugin crash when stream has a hole
by GitHub issues - edited 28 Dec '20

28 Dec '20

alsa-project/alsa-plugins issue #16 was edited from i-garrison: Following up on this debian bug report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=824850 Looks like this crash is caused by missing stream hole handling in pulse plugin. Pulseaudio change was done just before `pulseaudio-v3.0` release and this issue should be reproducible with all current versions: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dfd44036b54d6… quoting from there: ``` ... let the caller decide how the holes should be handled, so in case of holes, pa_stream_peek() will return NULL data pointer and the length of the hole in the nbytes argument ``` Here in pulse plugin, if there is a hole in stream `pa_stream_peek` would return NULL buffer pointer but non-zero `frag_length` and later memcpy is happily trying to copy from NULL source: https://github.com/alsa-project/alsa-plugins/blob/7028580da1db9a2362dd9b063… Instead, pulse plugin should detect there is a hole by checking if `src_buf` is still NULL while `frag_length` is not zero, and adjust transfer result accordingly. Issue URL : https://github.com/alsa-project/alsa-plugins/issues/16 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

[PATCH v3 0/1] ASoC: dpcm: acquire dpcm_lock in dpcm_do_trigger()
by Gyeongtaek Lee 28 Dec '20

28 Dec '20

>Hi Gyeongtaek > >Thank you for your help > >> I tried to find out some change from the history. >> However, I saw that dpcm_lock never be held in dpcm_be_dai_trigger() from the beginning. >> So, I just fixed some miss from the commit comment and resend. >> If you have another suggestion or request, just let me know. > >OK, thanks. >I just thought it was related to recent (especially mine :) patch. > >BYW, your posted v2 still doesn't have alignment on log. >Is it mailer issue ? Sorry. I didn't fully understand what alignment means. I fixed the log by looking at some previous commits. Thank you so much. Gyeongtaek Lee > >> And I have a question. >> This patch can?t be applied to stable branches directly by conflict. >> I found out following commits are needed to apply this patch into the 5.4 stable. >> ASoC: soc-pcm: remove snd_soc_dpcm_be_get/set_state() >> ASoC: soc-pcm: add snd_soc_dpcm_can_be() and remove duplicate code >> In this case, what should I do when stable maintainer requests resolving conflict to me? >> Should I send those patches to the maintainer? >> Or rewrite the patch on the latest of the each stable? > >Mark, please help him > >Thank you for your help !! > >Best regards >--- >Kuninori Morimoto > Gyeongtaek Lee (1): ASoC: dpcm: acquire dpcm_lock in dpcm_do_trigger() sound/soc/soc-pcm.c | 62 ++++++++++++++++++++++++++++++++------------- 1 file changed, 44 insertions(+), 18 deletions(-) base-commit: fa02fcd94b0c8dff6cc65714510cf25ad194b90d -- 2.21.0

1 0

pulse: handle reading pulse stream hole
by GitHub pull_request - opened 28 Dec '20

28 Dec '20

alsa-project/alsa-plugins pull request #17 was opened from i-garrison: If there is a hole in pulse stream, handle it by generating silence. This should fix #16 Request URL : https://github.com/alsa-project/alsa-plugins/pull/17 Patch URL : https://github.com/alsa-project/alsa-plugins/pull/17.patch Repository URL: https://github.com/alsa-project/alsa-plugins

1 0

pulse plugin crash when stream has a hole
by GitHub issues - opened 28 Dec '20

28 Dec '20

alsa-project/alsa-plugins issue #16 was opened from i-garrison: Following up on this debian bug report https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=824850 Looks like this crash is caused by missing stream hole handling in pulse plugin. Pulseaudio change was done just before `pulseaudio-v3.0` release and this issue should be reproducible with all current versions: https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/commit/dfd44036b54d6… quoting from there: ``` ... let the caller decide how the holes should be handled, so in case of holes, pa_stream_peek() will return NULL data pointer and the length of the hole in the nbytes argument ``` Here in pulse plugin, if there is a hole in stream `pa_stream_peek` would return NULL buffer pointer but non-zero `frag_length` and later memcpy is happily trying to copy from NULL source: https://github.com/alsa-project/alsa-plugins/blob/7028580da1db9a2362dd9b063… Instead, pulse plugin should detect there is a hole by checking if `src_buf` is still NULL while `frag_lenght` is not zero, and adjust transfer result accordingly. Issue URL : https://github.com/alsa-project/alsa-plugins/issues/16 Repository URL: https://github.com/alsa-project/alsa-plugins

1 0