November 2020 - Alsa-devel - mailman.alsa-project.org

[PATCH 0/5] regmap/SoundWire/ASoC: Add SoundWire SDCA support
by Bard Liao 30 Nov '20

30 Nov '20

The MIPI SoundWire Device Class standard will define audio functionality beyond the scope of the existing SoundWire 1.2 standard, which is limited to the bus and interface. The description is inspired by the USB Audio Class, with "functions", "entities", "control selectors", "audio clusters". The main difference with the USB Audio class is that the devices are typically on a motherboard and descriptors stored in platform firmware instead of being retrieved from the device. The current set of devices managed in this patchset are conformant with the SDCA 0.6 specification and require dedicated drivers since the descriptors and platform firmware specification is not complete at this time. They do however rely on the hierarchical addressing required by the SDCA standard. Future devices conformant with SDCA 1.0 should rely on a class driver. This series adds support for the hierarchical SDCA addressing and extends regmap. It then provides 3 codecs for RT711-sdca headset codec, RT1316 amplifier and RT715-scda microphone codec. Note that the release of this code before the formal adoption of the SDCA 1.0 specification was formally endorsed by the MIPI Board to make sure there is no delay for Linux-based support of this specification. Jack Yu (1): ASoC/SoundWire: rt715-sdca: First version of rt715 sdw sdca codec driver Pierre-Louis Bossart (2): soundwire: SDCA: add helper macro to access controls regmap/SoundWire: sdw: add support for SoundWire 1.2 MBQ Shuming Fan (2): ASoC/SoundWire: rt1316: Add RT1316 SDCA vendor-specific driver ASoC/SoundWire: rt711-sdca: Add RT711 SDCA vendor-specific driver drivers/base/regmap/Kconfig | 6 +- drivers/base/regmap/Makefile | 1 + drivers/base/regmap/regmap-sdw-mbq.c | 101 ++ include/linux/regmap.h | 35 + include/linux/soundwire/sdw_registers.h | 32 + sound/soc/codecs/Kconfig | 20 + sound/soc/codecs/Makefile | 6 + sound/soc/codecs/rt1316-sdw.c | 756 ++++++++++++ sound/soc/codecs/rt1316-sdw.h | 115 ++ sound/soc/codecs/rt711-sdca-sdw.c | 424 +++++++ sound/soc/codecs/rt711-sdca-sdw.h | 101 ++ sound/soc/codecs/rt711-sdca.c | 1481 +++++++++++++++++++++++ sound/soc/codecs/rt711-sdca.h | 246 ++++ sound/soc/codecs/rt715-sdca-sdw.c | 278 +++++ sound/soc/codecs/rt715-sdca-sdw.h | 170 +++ sound/soc/codecs/rt715-sdca.c | 936 ++++++++++++++ sound/soc/codecs/rt715-sdca.h | 124 ++ 17 files changed, 4831 insertions(+), 1 deletion(-) create mode 100644 drivers/base/regmap/regmap-sdw-mbq.c create mode 100644 sound/soc/codecs/rt1316-sdw.c create mode 100644 sound/soc/codecs/rt1316-sdw.h create mode 100644 sound/soc/codecs/rt711-sdca-sdw.c create mode 100644 sound/soc/codecs/rt711-sdca-sdw.h create mode 100644 sound/soc/codecs/rt711-sdca.c create mode 100644 sound/soc/codecs/rt711-sdca.h create mode 100644 sound/soc/codecs/rt715-sdca-sdw.c create mode 100644 sound/soc/codecs/rt715-sdca-sdw.h create mode 100644 sound/soc/codecs/rt715-sdca.c create mode 100644 sound/soc/codecs/rt715-sdca.h -- 2.17.1

4 12

[PATCH] soundwire: Fix error return code in sdw_compute_port_params
by Qinglang Miao 30 Nov '20

30 Nov '20

Fix to return the error code -EINVAL in sdw_compute_port_params instead of 0. Fixes: 9026118f20e2 ("soundwire: Add generic bandwidth allocation algorithm") Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang(a)huawei.com> --- drivers/soundwire/generic_bandwidth_allocation.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/soundwire/generic_bandwidth_allocation.c b/drivers/soundwire/generic_bandwidth_allocation.c index 0bdef38c9..ad857ac62 100644 --- a/drivers/soundwire/generic_bandwidth_allocation.c +++ b/drivers/soundwire/generic_bandwidth_allocation.c @@ -283,8 +283,10 @@ static int sdw_compute_port_params(struct sdw_bus *bus) if (ret < 0) return ret; - if (group.count == 0) + if (group.count == 0) { + ret = -EINVAL; goto out; + } params = kcalloc(group.count, sizeof(*params), GFP_KERNEL); if (!params) { -- 2.23.0

2 1

[PATCH 0/5] ASoC: SOF: Intel: fix ICL boot sequence
by Kai Vehmanen 30 Nov '20

30 Nov '20

Series introducing a modified boot sequence for the Intel Ice Lake platform. While no bugs are currently open for this, the current DSP boot implementation does not follow the full programming sequence. This patchset is the first instance where SOF driver uses data in the extended manifest (part of the firmware binary), to influence the boot process. IPC cannot be used to get this information, as it is already needed for early boot. This change is backwards compatible with old firmware versions, where extended manifest is not available. Fred Oh (5): ASoC: SOF: ops: add parse_platform_ext_manifest() op ASoC: SOF: Intel: hda: define parse_platform_ext_manifest op ASoC: SOF: ext_manifest: parse cavs extra config data elem ASoC: SOF: ops: modify the signature of stall op ASoC: SOF: Intel: hda: add sof_icl_ops for ICL platforms include/sound/sof/ext_manifest.h | 1 + sound/soc/sof/intel/Makefile | 2 +- sound/soc/sof/intel/apl.c | 3 + sound/soc/sof/intel/cnl.c | 19 +--- sound/soc/sof/intel/ext_manifest.h | 35 +++++++ sound/soc/sof/intel/hda-loader.c | 100 ++++++++++++++++++++ sound/soc/sof/intel/hda.h | 11 +++ sound/soc/sof/intel/icl.c | 145 +++++++++++++++++++++++++++++ sound/soc/sof/intel/tgl.c | 3 + sound/soc/sof/loader.c | 3 + sound/soc/sof/ops.h | 14 ++- sound/soc/sof/sof-pci-dev.c | 2 +- sound/soc/sof/sof-priv.h | 7 +- 13 files changed, 324 insertions(+), 21 deletions(-) create mode 100644 sound/soc/sof/intel/ext_manifest.h create mode 100644 sound/soc/sof/intel/icl.c -- 2.28.0

2 6

[PATCH] ASoC: mediatek: btcvsd fix tx stream assign
by Lumi Lee 30 Nov '20

30 Nov '20

From: Lumi Lee <lumi.lee(a)mediatek.com> Fix tx/rx stream assign in write. Write should use tx instead of rx. Signed-off-by: Lumi Lee <lumi.lee(a)mediatek.com> --- sound/soc/mediatek/common/mtk-btcvsd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/mediatek/common/mtk-btcvsd.c b/sound/soc/mediatek/common/mtk-btcvsd.c index 668fef3..a554c57 100644 --- a/sound/soc/mediatek/common/mtk-btcvsd.c +++ b/sound/soc/mediatek/common/mtk-btcvsd.c @@ -808,7 +808,7 @@ static ssize_t mtk_btcvsd_snd_write(struct mtk_btcvsd_snd *bt, spin_unlock_irqrestore(&bt->tx_lock, flags); if (!avail) { - int ret = wait_for_bt_irq(bt, bt->rx); + int ret = wait_for_bt_irq(bt, bt->tx); if (ret) return written_size; -- 1.7.9.5

2 1

[PATCH 0/2] ASoC: tidyup for jack.h
by Kuninori Morimoto 30 Nov '20

30 Nov '20

Hi Mark These are jack.h related tidyup. Kuninori Morimoto (2): ASoC: soc-core: tidyup jack.h ASoC: add soc-jack.h include/sound/soc-jack.h | 132 ++++++++++++++++++++++++++++++++++++ include/sound/soc.h | 122 +-------------------------------- include/trace/events/asoc.h | 1 + sound/soc/soc-core.c | 1 - 4 files changed, 134 insertions(+), 122 deletions(-) create mode 100644 include/sound/soc-jack.h -- 2.25.1

2 3

[PATCH 0/2] ASoC: amd: Minor fixes for error handling
by Takashi Iwai 30 Nov '20

30 Nov '20

Hi, this is a set of patches to address the errors appearing on the machine that has no I2S DMIC on AMD machine but probed. Takashi === Takashi Iwai (2): ASoC: amd: Downgrade print level for invalid ACP mode ASoC: amd: Return -ENODEV for non-existing ACPI call sound/soc/amd/raven/pci-acp3x.c | 2 +- sound/soc/amd/renoir/rn-pci-acp3x.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) -- 2.26.2

2 3

[PATCH v2 1/2] dt-bindings: sound: adau1372: Add bindings documentation
by Alexandre Belloni 30 Nov '20

30 Nov '20

Add device tree binding documentation for Analog Devices ADAU1372. Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Reviewed-by: Rob Herring <robh(a)kernel.org> --- Changes in v2: - Added Rob's reviewed-by .../bindings/sound/adi,adau1372.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,adau1372.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml new file mode 100644 index 000000000000..701449311fec --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + + +title: Analog Devices ADAU1372 CODEC + +maintainers: + - Alexandre Belloni <alexandre.belloni(a)bootlin.om> + +description: | + Analog Devices ADAU1372 four inputs and two outputs codec. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU137… + +properties: + compatible: + enum: + - adi,adau1372 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: "mclk" + + powerdown-gpios: + description: GPIO used for hardware power-down. + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@3c { + compatible = "adi,adau1372"; + reg = <0x3c>; + #sound-dai-cells = <0>; + clock-names = "mclk"; + clocks = <&adau1372z_xtal>; + }; + }; + + adau1372z_xtal: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +... + -- 2.28.0

2 2

[PATCH 1/2] dt-bindings: sound: adau1372: Add bindings documentation
by Alexandre Belloni 30 Nov '20

30 Nov '20

Add device tree binding documentation for Analog Devices ADAU1372. Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> --- Cc: Rob Herring <robh+dt(a)kernel.org> .../bindings/sound/adi,adau1372.yaml | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/adi,adau1372.yaml diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml new file mode 100644 index 000000000000..701449311fec --- /dev/null +++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/adi,adau1372.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + + +title: Analog Devices ADAU1372 CODEC + +maintainers: + - Alexandre Belloni <alexandre.belloni(a)bootlin.om> + +description: | + Analog Devices ADAU1372 four inputs and two outputs codec. + https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU137… + +properties: + compatible: + enum: + - adi,adau1372 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + maxItems: 1 + + clock-names: + const: "mclk" + + powerdown-gpios: + description: GPIO used for hardware power-down. + maxItems: 1 + +required: + - "#sound-dai-cells" + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + audio-codec@3c { + compatible = "adi,adau1372"; + reg = <0x3c>; + #sound-dai-cells = <0>; + clock-names = "mclk"; + clocks = <&adau1372z_xtal>; + }; + }; + + adau1372z_xtal: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12288000>; + }; +... + -- 2.28.0

4 4

[PATCH] ALSA: usb-audio: Add quirk for Pioneer DJ DDJ-SR2
by Takashi Iwai 30 Nov '20

30 Nov '20

Yet another quirk for Pioneer DJ DDJ-SR2, which is quite similar like other DJ DDJ models but with slightly different EPs or channels. Reported-by: Geraldo <geraldogabriel(a)gmail.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/usb/quirks-table.h | 57 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 7454011f6006..0e11cb96fa8c 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3579,6 +3579,63 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), } }, +{ + /* + * PIONEER DJ DDJ-SR2 + * PCM is 4 channels out, 6 channels in @ 44.1 fixed + * The Feedback for the output is the input + */ + USB_DEVICE_VENDOR_SPEC(0x2b73, 0x001e), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 4, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x01, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC, + .rates = SNDRV_PCM_RATE_44100, + .rate_min = 44100, + .rate_max = 44100, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 44100 } + } + }, + { + .ifnum = 0, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S24_3LE, + .channels = 6, + .iface = 0, + .altsetting = 1, + .altset_idx = 1, + .endpoint = 0x82, + .ep_attr = USB_ENDPOINT_XFER_ISOC| + USB_ENDPOINT_SYNC_ASYNC| + USB_ENDPOINT_USAGE_IMPLICIT_FB, + .rates = SNDRV_PCM_RATE_44100, + .rate_min = 44100, + .rate_max = 44100, + .nr_rates = 1, + .rate_table = (unsigned int[]) { 44100 } + } + }, + { + .ifnum = -1 + } + } + } +}, + { /* * Pioneer DJ DJM-900NXS2 -- 2.26.2

1 0

[PATCH v5 0/7] Enable rk3066a HDMI sound
by Johan Jonker 30 Nov '20

30 Nov '20

First fix some legacy things in clk-rk3188.c that was never updated, because probably nobody used rk3066a I2S before in the mainline kernel. Update the rk3066a HDMI documents with a #sound-dai-cells property. Include the code for sound in the HDMI driver. Add a simple-sound-card compatible node to rk3066a.dtsi, because I2S0 and HDMI TX are connected internally. And as last enable rk3066a HDMI sound in the rk3066a-mk808.dts file. Changed v5: removed unused variable fill frame structure Johan Jonker (6): clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: fix i2s gate bits on rk3066 and rk3188 dt-bindings: display: add #sound-dai-cells property to rockchip rk3066 hdmi ARM: dts: rockchip: rk3066a: add #sound-dai-cells to hdmi node ARM: dts: rockchip: add hdmi-sound node to rk3066a.dtsi ARM: dts: rockchip: enable hdmi_sound and i2s0 for rk3066a-mk808 Zheng Yang (1): drm: rockchip: add sound support to rk3066 hdmi driver .../display/rockchip/rockchip,rk3066-hdmi.yaml | 4 + arch/arm/boot/dts/rk3066a-mk808.dts | 8 + arch/arm/boot/dts/rk3066a.dtsi | 17 ++ drivers/clk/rockchip/clk-rk3188.c | 35 +-- drivers/gpu/drm/rockchip/Kconfig | 2 + drivers/gpu/drm/rockchip/rk3066_hdmi.c | 275 ++++++++++++++++++++- 6 files changed, 323 insertions(+), 18 deletions(-) -- 2.11.0

2 8