January 2020 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v3 0/9] x86: Easy way of detecting MS Surface 3
by Andy Shevchenko 16 Mar '20

16 Mar '20

While working on RTC regression, I noticed that we are using the same DMI check over and over in the drivers for MS Surface 3 platform. This series dedicated for making it easier in the same way how it's done for Apple machines. Changelog v3: - fixed typo in patch 5 (Jonathan) - returned back to if {} else {} condition in ASoC driver (Mark) - added Mark's Ack tag Changelog v2: - removed RTC patches for now (the fix will be independent to this series) - added couple more clean ups to arch/x86/kernel/quirks.c - redone DMI quirk to use driver_data instead of callback - simplified check in soc-acpi-intel-cht-match.c to be oneliner - added a new patch to cover rt5645 codec driver Cc: Cezary Rojewski <cezary.rojewski(a)intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Cc: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> Cc: Jie Yang <yang.jie(a)linux.intel.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: alsa-devel(a)alsa-project.org Andy Shevchenko (9): x86/platform: Rename x86/apple.h -> x86/machine.h x86/quirks: Add missed include to satisfy static checker x86/quirks: Introduce hpet_dev_print_force_hpet_address() helper x86/quirks: Join string literals back x86/quirks: Convert DMI matching to use a table x86/quirks: Add a DMI quirk for Microsoft Surface 3 platform/x86: surface3_wmi: Switch DMI table match to a test of variable ASoC: rt5645: Switch DMI table match to a test of variable ASoC: Intel: Switch DMI table match to a test of variable arch/x86/kernel/quirks.c | 91 +++++++++++++------ drivers/platform/x86/surface3-wmi.c | 16 +--- include/linux/platform_data/x86/apple.h | 14 +-- include/linux/platform_data/x86/machine.h | 20 ++++ sound/soc/codecs/rt5645.c | 14 ++- .../intel/common/soc-acpi-intel-cht-match.c | 28 +----- 6 files changed, 93 insertions(+), 90 deletions(-) create mode 100644 include/linux/platform_data/x86/machine.h -- 2.24.1

2 6

[alsa-devel] [PATCH 0/6] ASoC: soc-acpi: add support for SoundWire-based machines
by Pierre-Louis Bossart 14 Mar '20

14 Mar '20

SoundWire support on Intel platforms relies on ACPI _ADR fields exposed in DSDT tables, with a 64-bit value defining which link a Slave device is connected to and its partId/manufacturerID/uniqueID. The existing definitions based on a globally-visible _HID used for I2C/I2S are no longer sufficient and need to be extended to detect during the probe steps which machine driver should be selected. This patchset adds the structure changes, and a set of static tables already used by Intel developers and customers. These tables are provided ahead of time, but they will only be used once all SoundWire-related parts are merged upstream and SoundWire is enabled in the builds. For reference, the complete set of 100+ patches required for SoundWire on Intel platforms is available here: https://github.com/thesofproject/linux/pull/1692 Bard Liao (1): ASoC: Intel: common: add match tables for ICL w/ SoundWire Pierre-Louis Bossart (4): ASoC: soc-acpi: add _ADR-based link descriptors ASoC: Intel: common: soc-acpi: declare new tables for SoundWire ASoC: Intel: common: add match tables for TGL w/ SoundWire ASoC: SOF: Intel: reference SoundWire machine lists Rander Wang (1): ASoC: Intel: common: add match tables for CNL/CFL/CML w/ SoundWire include/sound/soc-acpi-intel-match.h | 6 ++ include/sound/soc-acpi.h | 21 ++++ .../intel/common/soc-acpi-intel-cfl-match.c | 5 + .../intel/common/soc-acpi-intel-cml-match.c | 89 +++++++++++++++++ .../intel/common/soc-acpi-intel-cnl-match.c | 5 + .../intel/common/soc-acpi-intel-icl-match.c | 98 +++++++++++++++++++ .../intel/common/soc-acpi-intel-tgl-match.c | 51 +++++++++- sound/soc/sof/sof-pci-dev.c | 5 + 8 files changed, 278 insertions(+), 2 deletions(-) base-commit: b2e2a13796889e10ba0390ab338949ba63d89462 -- 2.20.1

4 20

[alsa-devel] [PATCH v3] ASoC: dt-bindings: stm32: convert spdfirx to json-schema
by Olivier Moysan 11 Mar '20

11 Mar '20

Convert the STM32 SPDIFRX bindings to DT schema format using json-schema. Signed-off-by: Olivier Moysan <olivier.moysan(a)st.com> --- Changes in v2: - Add "additionalProperties: false" - Also change minItems to 2 for dmas property, as both DMAs are required. Changes in v3: - Drop minItems/maxItems for dmas property, remove ref to stm32-dma.txt. --- .../bindings/sound/st,stm32-spdifrx.txt | 56 ------------- .../bindings/sound/st,stm32-spdifrx.yaml | 80 +++++++++++++++++++ 2 files changed, 80 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt deleted file mode 100644 index 33826f2459fa..000000000000 --- a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.txt +++ /dev/null @@ -1,56 +0,0 @@ -STMicroelectronics STM32 S/PDIF receiver (SPDIFRX). - -The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with -IEC-60958 and IEC-61937. - -Required properties: - - compatible: should be "st,stm32h7-spdifrx" - - reg: cpu DAI IP base address and size - - clocks: must contain an entry for kclk (used as S/PDIF signal reference) - - clock-names: must contain "kclk" - - interrupts: cpu DAI interrupt line - - dmas: DMA specifiers for audio data DMA and iec control flow DMA - See STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt - - dma-names: two dmas have to be defined, "rx" and "rx-ctrl" - -Optional properties: - - resets: Reference to a reset controller asserting the SPDIFRX - -The device node should contain one 'port' child node with one child 'endpoint' -node, according to the bindings defined in Documentation/devicetree/bindings/ -graph.txt. - -Example: -spdifrx: spdifrx@40004000 { - compatible = "st,stm32h7-spdifrx"; - reg = <0x40004000 0x400>; - clocks = <&rcc SPDIFRX_CK>; - clock-names = "kclk"; - interrupts = <97>; - dmas = <&dmamux1 2 93 0x400 0x0>, - <&dmamux1 3 94 0x400 0x0>; - dma-names = "rx", "rx-ctrl"; - pinctrl-0 = <&spdifrx_pins>; - pinctrl-names = "default"; - - spdifrx_port: port { - cpu_endpoint: endpoint { - remote-endpoint = <&codec_endpoint>; - }; - }; -}; - -spdif_in: spdif-in { - compatible = "linux,spdif-dir"; - - codec_port: port { - codec_endpoint: endpoint { - remote-endpoint = <&cpu_endpoint>; - }; - }; -}; - -soundcard { - compatible = "audio-graph-card"; - dais = <&spdifrx_port>; -}; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml new file mode 100644 index 000000000000..b7f7dc452231 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/st,stm32-spdifrx.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/st,stm32-spdifrx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics STM32 S/PDIF receiver (SPDIFRX) + +maintainers: + - Olivier Moysan <olivier.moysan(a)st.com> + +description: | + The SPDIFRX peripheral, is designed to receive an S/PDIF flow compliant with + IEC-60958 and IEC-61937. + +properties: + compatible: + enum: + - st,stm32h7-spdifrx + + "#sound-dai-cells": + const: 0 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: kclk + + interrupts: + maxItems: 1 + + dmas: + items: + - description: audio data capture DMA + - description: IEC status bits capture DMA + + dma-names: + items: + - const: rx + - const: rx-ctrl + + resets: + maxItems: 1 + +required: + - compatible + - "#sound-dai-cells" + - reg + - clocks + - clock-names + - interrupts + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + spdifrx: spdifrx@40004000 { + compatible = "st,stm32h7-spdifrx"; + #sound-dai-cells = <0>; + reg = <0x40004000 0x400>; + clocks = <&rcc SPDIF_K>; + clock-names = "kclk"; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dmamux1 2 93 0x400 0x0>, + <&dmamux1 3 94 0x400 0x0>; + dma-names = "rx", "rx-ctrl"; + pinctrl-0 = <&spdifrx_pins>; + pinctrl-names = "default"; + }; + +... -- 2.17.1

3 6

[alsa-devel] [PATCH alsa-ucm-conf] bytcht-es8316: Fix missing including of HeadPhones.conf after ucm2 conversion
by Hans de Goede 07 Mar '20

07 Mar '20

The conversion to ucm2 format missed adding an include for: codecs/es8316/HeadPhones.conf Leading to no sound on the headphones output, this commit adds the missing include fixing this. Cc: youling 257 <youling257(a)gmail.com> Reported-by: youling 257 <youling257(a)gmail.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> --- ucm2/bytcht-es8316/HiFi-Components.conf | 2 ++ ucm2/bytcht-es8316/HiFi-LongName.conf | 2 ++ 2 files changed, 4 insertions(+) diff --git a/ucm2/bytcht-es8316/HiFi-Components.conf b/ucm2/bytcht-es8316/HiFi-Components.conf index 314d355..c40bd49 100644 --- a/ucm2/bytcht-es8316/HiFi-Components.conf +++ b/ucm2/bytcht-es8316/HiFi-Components.conf @@ -20,6 +20,8 @@ If.mono { } } +<codecs/es8316/HeadPhones.conf> + If.in1 { Condition { Type String diff --git a/ucm2/bytcht-es8316/HiFi-LongName.conf b/ucm2/bytcht-es8316/HiFi-LongName.conf index ea7d1c3..03cf17b 100644 --- a/ucm2/bytcht-es8316/HiFi-LongName.conf +++ b/ucm2/bytcht-es8316/HiFi-LongName.conf @@ -20,6 +20,8 @@ If.mono { } } +<codecs/es8316/HeadPhones.conf> + If.in1 { Condition { Type String -- 2.24.1

3 3

[alsa-devel] Add headset Mic no shutup for ALC283
by Kailang 26 Feb '20

26 Feb '20

Hi Takashi, ChromeBox machine had humming noise from external skeaker plugin at codec D3 state. BR, Kailang

3 2

[alsa-devel] motu microbook iic
by thomas rost 26 Feb '20

26 Feb '20

Hello, can anybody help me get the 'class compliant' motu microbook iic to run? this is my alsa-info.sh output: http://alsa-project.org/db/?f=0fd9a8df7bae3400d83b6af8b75c45aa0760d84d thanks in advance. thomas

2 1

[alsa-devel] [PATCH] ASoC: rt1015: add rt1015 amplifier driver
by jack.yu＠realtek.com 25 Feb '20

25 Feb '20

From: Jack Yu <jack.yu(a)realtek.com> This is initial amplifier driver for rt1015. Signed-off-by: Jack Yu <jack.yu(a)realtek.com> --- .../devicetree/bindings/sound/rt1015.txt | 17 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/rt1015.c | 1016 +++++++++++++++++ sound/soc/codecs/rt1015.h | 368 ++++++ 5 files changed, 1409 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rt1015.txt create mode 100644 sound/soc/codecs/rt1015.c create mode 100644 sound/soc/codecs/rt1015.h diff --git a/Documentation/devicetree/bindings/sound/rt1015.txt b/Documentation/devicetree/bindings/sound/rt1015.txt new file mode 100644 index 000000000000..fcfd02d8d32f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt1015.txt @@ -0,0 +1,17 @@ +RT1015 Mono Class D Audio Amplifier + +This device supports I2C only. + +Required properties: + +- compatible : "realtek,rt1015". + +- reg : The I2C address of the device. + + +Example: + +rt1015: codec@28 { + compatible = "realtek,rt1015"; + reg = <0x28>; +}; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index cdfd912d5f8f..d7475e06c3e6 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -149,6 +149,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_RT286 if I2C select SND_SOC_RT298 if I2C select SND_SOC_RT1011 if I2C + select SND_SOC_RT1015 if I2C select SND_SOC_RT1305 if I2C select SND_SOC_RT1308 if I2C select SND_SOC_RT5514 if I2C @@ -956,6 +957,7 @@ config SND_SOC_RL6231 default y if SND_SOC_RT5677=y default y if SND_SOC_RT5682=y default y if SND_SOC_RT1011=y + default y if SND_SOC_RT1015=y default y if SND_SOC_RT1305=y default y if SND_SOC_RT1308=y default m if SND_SOC_RT5514=m @@ -972,6 +974,7 @@ config SND_SOC_RL6231 default m if SND_SOC_RT5677=m default m if SND_SOC_RT5682=m default m if SND_SOC_RT1011=m + default m if SND_SOC_RT1015=m default m if SND_SOC_RT1305=m default m if SND_SOC_RT1308=m @@ -999,6 +1002,9 @@ config SND_SOC_RT298 config SND_SOC_RT1011 tristate +config SND_SOC_RT1015 + tristate + config SND_SOC_RT1305 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index ce285b33a806..3efe6a5797e2 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -152,6 +152,7 @@ snd-soc-rk3328-objs := rk3328_codec.o snd-soc-rl6231-objs := rl6231.o snd-soc-rl6347a-objs := rl6347a.o snd-soc-rt1011-objs := rt1011.o +snd-soc-rt1015-objs := rt1015.o snd-soc-rt1305-objs := rt1305.o snd-soc-rt1308-objs := rt1308.o snd-soc-rt274-objs := rt274.o @@ -446,6 +447,7 @@ obj-$(CONFIG_SND_SOC_RK3328) += snd-soc-rk3328.o obj-$(CONFIG_SND_SOC_RL6231) += snd-soc-rl6231.o obj-$(CONFIG_SND_SOC_RL6347A) += snd-soc-rl6347a.o obj-$(CONFIG_SND_SOC_RT1011) += snd-soc-rt1011.o +obj-$(CONFIG_SND_SOC_RT1015) += snd-soc-rt1015.o obj-$(CONFIG_SND_SOC_RT1305) += snd-soc-rt1305.o obj-$(CONFIG_SND_SOC_RT1308) += snd-soc-rt1308.o obj-$(CONFIG_SND_SOC_RT274) += snd-soc-rt274.o diff --git a/sound/soc/codecs/rt1015.c b/sound/soc/codecs/rt1015.c new file mode 100644 index 000000000000..317c914cbfc9 --- /dev/null +++ b/sound/soc/codecs/rt1015.c @@ -0,0 +1,1016 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * rt1015.c -- RT1015 ALSA SoC audio amplifier driver + * + * Copyright 2019 Realtek Semiconductor Corp. + * Author: Jack Yu <jack.yu(a)realtek.com> + * + */ + +#include <linux/fs.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/firmware.h> +#include <linux/gpio.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> +#include <sound/tlv.h> + +#include "rl6231.h" +#include "rt1015.h" + +static const struct reg_sequence init_list[] = { + { 0x0000, 0x0000 }, + { 0x0104, 0xA213 }, + { 0x010E, 0x0058 }, + { 0x0111, 0x2000 }, + { 0x0322, 0xF7DF }, + { 0x1302, 0x12F7 }, + { 0x0336, 0x0010 }, + { 0x04FC, 0x35CF }, + { 0x0102, 0xed02 }, +}; +#define RT1015_INIT_REG_LEN ARRAY_SIZE(init_list) + +static const struct reg_default rt1015_reg[] = { + { 0x0000, 0x0000 }, + { 0x0004, 0xa000 }, + { 0x0006, 0x0003 }, + { 0x000a, 0x0802 }, + { 0x000c, 0x0020 }, + { 0x000e, 0x0000 }, + { 0x0010, 0x0000 }, + { 0x0012, 0x0000 }, + { 0x0020, 0x8000 }, + { 0x0022, 0x471b }, + { 0x006a, 0x0000 }, + { 0x006c, 0x4020 }, + { 0x0076, 0x0000 }, + { 0x0078, 0x0000 }, + { 0x007a, 0x0000 }, + { 0x007c, 0x10ec }, + { 0x007d, 0x1015 }, + { 0x00f0, 0x5000 }, + { 0x00f2, 0x0774 }, + { 0x00f3, 0x8400 }, + { 0x00f4, 0x0000 }, + { 0x0100, 0x0028 }, + { 0x0102, 0xff02 }, + { 0x0104, 0x8232 }, + { 0x0106, 0x200c }, + { 0x010c, 0x002f }, + { 0x010e, 0xc000 }, + { 0x0111, 0x0200 }, + { 0x0112, 0x0400 }, + { 0x0114, 0x0022 }, + { 0x0116, 0x0000 }, + { 0x0118, 0x0000 }, + { 0x011a, 0x0123 }, + { 0x011c, 0x4567 }, + { 0x0300, 0xdddd }, + { 0x0302, 0x0000 }, + { 0x0311, 0x9330 }, + { 0x0313, 0x0000 }, + { 0x0314, 0x0000 }, + { 0x031a, 0x00a0 }, + { 0x031c, 0x001f }, + { 0x031d, 0xffff }, + { 0x031e, 0x0000 }, + { 0x031f, 0x0000 }, + { 0x0321, 0x0000 }, + { 0x0322, 0x0000 }, + { 0x0328, 0x0000 }, + { 0x0329, 0x0000 }, + { 0x032a, 0x0000 }, + { 0x032b, 0x0000 }, + { 0x032c, 0x0000 }, + { 0x032d, 0x0000 }, + { 0x032e, 0x030e }, + { 0x0330, 0x0080 }, + { 0x0332, 0x0034 }, + { 0x0334, 0x0000 }, + { 0x0336, 0x0000 }, + { 0x0506, 0x04ff }, + { 0x0508, 0x0030 }, + { 0x050a, 0x0018 }, + { 0x0519, 0x307f }, + { 0x051a, 0xffff }, + { 0x051b, 0x4000 }, + { 0x051d, 0x0000 }, + { 0x051f, 0x0000 }, + { 0x0536, 0x1000 }, + { 0x0538, 0x0000 }, + { 0x053a, 0x0000 }, + { 0x053c, 0x0000 }, + { 0x053d, 0x0000 }, + { 0x053e, 0x0000 }, + { 0x053f, 0x0000 }, + { 0x0540, 0x0000 }, + { 0x0541, 0x0000 }, + { 0x0542, 0x0000 }, + { 0x0543, 0x0000 }, + { 0x0544, 0x0000 }, + { 0x0568, 0x0000 }, + { 0x056a, 0x0000 }, + { 0x1000, 0x0000 }, + { 0x1002, 0x6505 }, + { 0x1006, 0x5515 }, + { 0x1007, 0x003f }, + { 0x1009, 0x770f }, + { 0x100a, 0x01ff }, + { 0x100c, 0x0000 }, + { 0x100d, 0x0003 }, + { 0x1010, 0xa433 }, + { 0x1020, 0x0000 }, + { 0x1200, 0x3d02 }, + { 0x1202, 0x0813 }, + { 0x1204, 0x0211 }, + { 0x1206, 0x0000 }, + { 0x1208, 0x0000 }, + { 0x120a, 0x0000 }, + { 0x120c, 0x0000 }, + { 0x120e, 0x0000 }, + { 0x1210, 0x0000 }, + { 0x1212, 0x0000 }, + { 0x1300, 0x0701 }, + { 0x1302, 0x12f9 }, + { 0x1304, 0x3405 }, + { 0x1305, 0x0844 }, + { 0x1306, 0x1611 }, + { 0x1308, 0x555e }, + { 0x130a, 0x0000 }, + { 0x130c, 0x2400}, + { 0x130e, 0x7700 }, + { 0x130f, 0x0000 }, + { 0x1310, 0x0000 }, + { 0x1312, 0x0000 }, + { 0x1314, 0x0000 }, + { 0x1316, 0x0000 }, + { 0x1318, 0x0000 }, + { 0x131a, 0x0000 }, + { 0x1322, 0x0029 }, + { 0x1323, 0x4a52 }, + { 0x1324, 0x002c }, + { 0x1325, 0x0b02 }, + { 0x1326, 0x002d }, + { 0x1327, 0x6b5a }, + { 0x1328, 0x002e }, + { 0x1329, 0xcbb2 }, + { 0x132a, 0x0030 }, + { 0x132b, 0x2c0b }, + { 0x1330, 0x0031 }, + { 0x1331, 0x8c63 }, + { 0x1332, 0x0032 }, + { 0x1333, 0xecbb }, + { 0x1334, 0x0034 }, + { 0x1335, 0x4d13 }, + { 0x1336, 0x0037 }, + { 0x1337, 0x0dc3 }, + { 0x1338, 0x003d }, + { 0x1339, 0xef7b }, + { 0x133a, 0x0044 }, + { 0x133b, 0xd134 }, + { 0x133c, 0x0047 }, + { 0x133d, 0x91e4 }, + { 0x133e, 0x004d }, + { 0x133f, 0xc370 }, + { 0x1340, 0x0053 }, + { 0x1341, 0xf4fd }, + { 0x1342, 0x0060 }, + { 0x1343, 0x5816 }, + { 0x1344, 0x006c }, + { 0x1345, 0xbb2e }, + { 0x1346, 0x0072 }, + { 0x1347, 0xecbb }, + { 0x1348, 0x0076 }, + { 0x1349, 0x5d97 }, +}; + +static int rt1015_reg_init(struct snd_soc_component *component) +{ + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + + regmap_multi_reg_write(rt1015->regmap, init_list, RT1015_INIT_REG_LEN); + return 0; +} + +static bool rt1015_volatile_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RT1015_RESET: + case RT1015_CLK_DET: + case RT1015_SIL_DET: + case RT1015_VER_ID: + case RT1015_VENDOR_ID: + case RT1015_DEVICE_ID: + case RT1015_PRO_ALT: + case RT1015_DAC3: + case RT1015_VBAT_TEST_OUT1: + case RT1015_VBAT_TEST_OUT2: + case RT1015_VBAT_PROT_ATT: + case RT1015_VBAT_DET_CODE: + case RT1015_SMART_BST_CTRL1: + case RT1015_SPK_DC_DETECT1: + case RT1015_SPK_DC_DETECT4: + case RT1015_SPK_DC_DETECT5: + case RT1015_DC_CALIB_CLSD1: + case RT1015_DC_CALIB_CLSD5: + case RT1015_DC_CALIB_CLSD6: + case RT1015_DC_CALIB_CLSD7: + case RT1015_DC_CALIB_CLSD8: + case RT1015_S_BST_TIMING_INTER1: + return true; + + default: + return false; + } +} + +static bool rt1015_readable_register(struct device *dev, unsigned int reg) +{ + switch (reg) { + case RT1015_RESET: + case RT1015_CLK2: + case RT1015_CLK3: + case RT1015_PLL1: + case RT1015_PLL2: + case RT1015_CLK_DET: + case RT1015_SIL_DET: + case RT1015_CUSTOMER_ID: + case RT1015_PCODE_FWVER: + case RT1015_VER_ID: + case RT1015_VENDOR_ID: + case RT1015_DEVICE_ID: + case RT1015_PAD_DRV1: + case RT1015_PAD_DRV2: + case RT1015_GAT_BOOST: + case RT1015_PRO_ALT: + case RT1015_MAN_I2C: + case RT1015_DAC1: + case RT1015_DAC2: + case RT1015_DAC3: + case RT1015_ADC1: + case RT1015_ADC2: + case RT1015_TDM_MASTER: + case RT1015_TDM_TCON: + case RT1015_TDM1_1: + case RT1015_TDM1_2: + case RT1015_TDM1_3: + case RT1015_TDM1_4: + case RT1015_TDM1_5: + case RT1015_MIXER1: + case RT1015_MIXER2: + case RT1015_ANA_PROTECT1: + case RT1015_ANA_CTRL_SEQ1: + case RT1015_ANA_CTRL_SEQ2: + case RT1015_VBAT_DET_DEB: + case RT1015_VBAT_VOLT_DET1: + case RT1015_VBAT_VOLT_DET2: + case RT1015_VBAT_TEST_OUT1: + case RT1015_VBAT_TEST_OUT2: + case RT1015_VBAT_PROT_ATT: + case RT1015_VBAT_DET_CODE: + case RT1015_PWR1: + case RT1015_PWR4: + case RT1015_PWR5: + case RT1015_PWR6: + case RT1015_PWR7: + case RT1015_PWR8: + case RT1015_PWR9: + case RT1015_CLASSD_SEQ: + case RT1015_SMART_BST_CTRL1: + case RT1015_SMART_BST_CTRL2: + case RT1015_ANA_CTRL1: + case RT1015_ANA_CTRL2: + case RT1015_SPK_VOL: + case RT1015_SHORT_DETTOP1: + case RT1015_SHORT_DETTOP2: + case RT1015_SPK_DC_DETECT1: + case RT1015_SPK_DC_DETECT2: + case RT1015_SPK_DC_DETECT3: + case RT1015_SPK_DC_DETECT4: + case RT1015_SPK_DC_DETECT5: + case RT1015_BAT_RPO_STEP1: + case RT1015_BAT_RPO_STEP2: + case RT1015_BAT_RPO_STEP3: + case RT1015_BAT_RPO_STEP4: + case RT1015_BAT_RPO_STEP5: + case RT1015_BAT_RPO_STEP6: + case RT1015_BAT_RPO_STEP7: + case RT1015_BAT_RPO_STEP8: + case RT1015_BAT_RPO_STEP9: + case RT1015_BAT_RPO_STEP10: + case RT1015_BAT_RPO_STEP11: + case RT1015_BAT_RPO_STEP12: + case RT1015_SPREAD_SPEC1: + case RT1015_SPREAD_SPEC2: + case RT1015_PAD_STATUS: + case RT1015_PADS_PULLING_CTRL1: + case RT1015_PADS_DRIVING: + case RT1015_SYS_RST1: + case RT1015_SYS_RST2: + case RT1015_SYS_GATING1: + case RT1015_TEST_MODE1: + case RT1015_TEST_MODE2: + case RT1015_TIMING_CTRL1: + case RT1015_PLL_INT: + case RT1015_TEST_OUT1: + case RT1015_DC_CALIB_CLSD1: + case RT1015_DC_CALIB_CLSD2: + case RT1015_DC_CALIB_CLSD3: + case RT1015_DC_CALIB_CLSD4: + case RT1015_DC_CALIB_CLSD5: + case RT1015_DC_CALIB_CLSD6: + case RT1015_DC_CALIB_CLSD7: + case RT1015_DC_CALIB_CLSD8: + case RT1015_DC_CALIB_CLSD9: + case RT1015_DC_CALIB_CLSD10: + case RT1015_CLSD_INTERNAL1: + case RT1015_CLSD_INTERNAL2: + case RT1015_CLSD_INTERNAL3: + case RT1015_CLSD_INTERNAL4: + case RT1015_CLSD_INTERNAL5: + case RT1015_CLSD_INTERNAL6: + case RT1015_CLSD_INTERNAL7: + case RT1015_CLSD_INTERNAL8: + case RT1015_CLSD_INTERNAL9: + case RT1015_CLSD_OCP_CTRL: + case RT1015_VREF_LV: + case RT1015_MBIAS1: + case RT1015_MBIAS2: + case RT1015_MBIAS3: + case RT1015_MBIAS4: + case RT1015_VREF_LV1: + case RT1015_S_BST_TIMING_INTER1: + case RT1015_S_BST_TIMING_INTER2: + case RT1015_S_BST_TIMING_INTER3: + case RT1015_S_BST_TIMING_INTER4: + case RT1015_S_BST_TIMING_INTER5: + case RT1015_S_BST_TIMING_INTER6: + case RT1015_S_BST_TIMING_INTER7: + case RT1015_S_BST_TIMING_INTER8: + case RT1015_S_BST_TIMING_INTER9: + case RT1015_S_BST_TIMING_INTER10: + case RT1015_S_BST_TIMING_INTER11: + case RT1015_S_BST_TIMING_INTER12: + case RT1015_S_BST_TIMING_INTER13: + case RT1015_S_BST_TIMING_INTER14: + case RT1015_S_BST_TIMING_INTER15: + case RT1015_S_BST_TIMING_INTER16: + case RT1015_S_BST_TIMING_INTER17: + case RT1015_S_BST_TIMING_INTER18: + case RT1015_S_BST_TIMING_INTER19: + case RT1015_S_BST_TIMING_INTER20: + case RT1015_S_BST_TIMING_INTER21: + case RT1015_S_BST_TIMING_INTER22: + case RT1015_S_BST_TIMING_INTER23: + case RT1015_S_BST_TIMING_INTER24: + case RT1015_S_BST_TIMING_INTER25: + case RT1015_S_BST_TIMING_INTER26: + case RT1015_S_BST_TIMING_INTER27: + case RT1015_S_BST_TIMING_INTER28: + case RT1015_S_BST_TIMING_INTER29: + case RT1015_S_BST_TIMING_INTER30: + case RT1015_S_BST_TIMING_INTER31: + case RT1015_S_BST_TIMING_INTER32: + case RT1015_S_BST_TIMING_INTER33: + case RT1015_S_BST_TIMING_INTER34: + case RT1015_S_BST_TIMING_INTER35: + case RT1015_S_BST_TIMING_INTER36: + return true; + + default: + return false; + } +} + +static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -9525, 75, 0); + +static const char * const rt1015_din_source_select[] = { + "Left", + "Right", + "Left + Right average", +}; + +static SOC_ENUM_SINGLE_DECL(rt1015_mono_lr_sel, RT1015_PAD_DRV2, 4, + rt1015_din_source_select); + +static const char * const rt1015_boost_mode[] = { + "Bypass", "Adaptive", "Fixed Adaptive" +}; + +static const SOC_ENUM_SINGLE_DECL(rt1015_boost_mode_enum, 0, 0, + rt1015_boost_mode); + +static int rt1015_boost_mode_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct rt1015_priv *rt1015 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1015->boost_mode; + + return 0; +} + +static int rt1015_boost_mode_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct rt1015_priv *rt1015 = + snd_soc_component_get_drvdata(component); + + rt1015->boost_mode = ucontrol->value.integer.value[0]; + if (rt1015->boost_mode == 0) { + /* Bypass */ + snd_soc_component_update_bits(component, + RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | + RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, + RT1015_ABST_REG_MODE | RT1015_ABST_FIX_TGT_DIS | + RT1015_BYPASS_SWRREG_BYPASS); + } else if (rt1015->boost_mode == 1) { + /* Adaptive */ + snd_soc_component_update_bits(component, + RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | + RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, + RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_DIS | + RT1015_BYPASS_SWRREG_PASS); + } else { + /* Fixed Adaptive */ + snd_soc_component_update_bits(component, + RT1015_SMART_BST_CTRL1, RT1015_ABST_AUTO_EN_MASK | + RT1015_ABST_FIX_TGT_MASK | RT1015_BYPASS_SWR_REG_MASK, + RT1015_ABST_AUTO_MODE | RT1015_ABST_FIX_TGT_EN | + RT1015_BYPASS_SWRREG_PASS); + } + + return 0; +} + +static int rt5518_bypass_boost_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct rt1015_priv *rt1015 = + snd_soc_component_get_drvdata(component); + + ucontrol->value.integer.value[0] = rt1015->bypass_boost; + + return 0; +} + +static int rt5518_bypass_boost_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct rt1015_priv *rt1015 = + snd_soc_component_get_drvdata(component); + + rt1015->bypass_boost = ucontrol->value.integer.value[0]; + if (rt1015->bypass_boost == 1) { + snd_soc_component_write(component, + RT1015_PWR4, 0x00b2); + snd_soc_component_write(component, + RT1015_CLSD_INTERNAL8, 0x2008); + snd_soc_component_write(component, + RT1015_CLSD_INTERNAL9, 0x0140); + snd_soc_component_write(component, + RT1015_GAT_BOOST, 0x00fe); + snd_soc_component_write(component, + RT1015_PWR_STATE_CTRL, 0x000d); + msleep(500); + snd_soc_component_write(component, + RT1015_PWR_STATE_CTRL, 0x000e); + } + + return 0; +} + +static const struct snd_kcontrol_new rt1015_snd_controls[] = { + SOC_SINGLE_TLV("DAC Playback Volume", RT1015_DAC1, RT1015_DAC_VOL_SFT, + 127, 0, dac_vol_tlv), + SOC_DOUBLE("DAC Playback Switch", RT1015_DAC3, + RT1015_DA_MUTE_SFT, RT1015_DVOL_MUTE_FLAG_SFT, 1, 1), + SOC_ENUM_EXT("Boost Mode", rt1015_boost_mode_enum, + rt1015_boost_mode_get, rt1015_boost_mode_put), + SOC_ENUM("Mono LR Select", rt1015_mono_lr_sel), + SOC_SINGLE_EXT("Bypass Boost", SND_SOC_NOPM, 0, 1, 0, + rt5518_bypass_boost_get, rt5518_bypass_boost_put), +}; + +static int rt1015_is_sys_clk_from_pll(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(source->dapm); + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + + if (rt1015->sysclk_src == RT1015_SCLK_S_PLL) + return 1; + else + return 0; +} + +static int r1015_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(w->dapm); + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + if (rt1015->bypass_boost == 0) { + snd_soc_component_write(component, + RT1015_SYS_RST1, 0x05f7); + snd_soc_component_write(component, + RT1015_GAT_BOOST, 0xacfe); + snd_soc_component_write(component, + RT1015_PWR9, 0xaa00); + snd_soc_component_write(component, + RT1015_GAT_BOOST, 0xecfe); + } else { + snd_soc_component_write(component, + RT1015_SYS_RST1, 0x05f7); + snd_soc_component_write(component, + RT1015_PWR_STATE_CTRL, 0x026e); + } + break; + + case SND_SOC_DAPM_POST_PMD: + if (rt1015->bypass_boost == 0) { + snd_soc_component_write(component, + RT1015_PWR9, 0xa800); + snd_soc_component_write(component, + RT1015_SYS_RST1, 0x05f5); + } else { + snd_soc_component_write(component, + RT1015_PWR_STATE_CTRL, 0x0268); + snd_soc_component_write(component, + RT1015_SYS_RST1, 0x05f5); + } + break; + + default: + break; + } + return 0; +} + +static const struct snd_soc_dapm_widget rt1015_dapm_widgets[] = { + SND_SOC_DAPM_SUPPLY("LDO2", RT1015_PWR1, RT1015_PWR_LDO2_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("INT RC CLK", RT1015_PWR1, RT1015_PWR_INTCLK_BIT, + 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ISENSE", RT1015_PWR1, RT1015_PWR_ISENSE_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("VSENSE", RT1015_PWR1, RT1015_PWR_VSENSE_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL", RT1015_PWR1, RT1015_PWR_PLL_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("BG1 BG2", RT1015_PWR1, RT1015_PWR_BG_1_2_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("MBIAS BG", RT1015_PWR1, RT1015_PWR_MBIAS_BG_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("VBAT", RT1015_PWR1, RT1015_PWR_VBAT_BIT, 0, NULL, + 0), + SND_SOC_DAPM_SUPPLY("MBIAS", RT1015_PWR1, RT1015_PWR_MBIAS_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("ADCV", RT1015_PWR1, RT1015_PWR_ADCV_BIT, 0, NULL, + 0), + SND_SOC_DAPM_SUPPLY("MIXERV", RT1015_PWR1, RT1015_PWR_MIXERV_BIT, 0, + NULL, 0), + SND_SOC_DAPM_SUPPLY("SUMV", RT1015_PWR1, RT1015_PWR_SUMV_BIT, 0, NULL, + 0), + SND_SOC_DAPM_SUPPLY("VREFLV", RT1015_PWR1, RT1015_PWR_VREFLV_BIT, 0, + NULL, 0), + + SND_SOC_DAPM_AIF_IN("AIFRX", "AIF Playback", 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC_E("DAC", NULL, RT1015_PWR1, RT1015_PWR_DAC_BIT, 0, + r1015_dac_event, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + + SND_SOC_DAPM_OUTPUT("SPO"), +}; + +static const struct snd_soc_dapm_route rt1015_dapm_routes[] = { + { "DAC", NULL, "AIFRX" }, + { "DAC", NULL, "LDO2" }, + { "DAC", NULL, "PLL", rt1015_is_sys_clk_from_pll}, + { "DAC", NULL, "INT RC CLK" }, + { "DAC", NULL, "ISENSE" }, + { "DAC", NULL, "VSENSE" }, + { "DAC", NULL, "BG1 BG2" }, + { "DAC", NULL, "MBIAS BG" }, + { "DAC", NULL, "VBAT" }, + { "DAC", NULL, "MBIAS" }, + { "DAC", NULL, "ADCV" }, + { "DAC", NULL, "MIXERV" }, + { "DAC", NULL, "SUMV" }, + { "DAC", NULL, "VREFLV" }, + { "SPO", NULL, "DAC" }, +}; + +static int rt1015_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + int pre_div, bclk_ms, frame_size; + unsigned int val_len = 0; + + rt1015->lrck = params_rate(params); + pre_div = rl6231_get_clk_info(rt1015->sysclk, rt1015->lrck); + if (pre_div < 0) { + dev_err(component->dev, "Unsupported clock rate\n"); + return -EINVAL; + } + + frame_size = snd_soc_params_to_frame_size(params); + if (frame_size < 0) { + dev_err(component->dev, "Unsupported frame size: %d\n", + frame_size); + return -EINVAL; + } + + bclk_ms = frame_size > 32; + rt1015->bclk = rt1015->lrck * (32 << bclk_ms); + + dev_dbg(component->dev, "bclk_ms is %d and pre_div is %d for iis %d\n", + bclk_ms, pre_div, dai->id); + + dev_dbg(component->dev, "lrck is %dHz and pre_div is %d for iis %d\n", + rt1015->lrck, pre_div, dai->id); + + switch (params_width(params)) { + case 16: + break; + case 20: + val_len = RT1015_I2S_DL_20; + break; + case 24: + val_len = RT1015_I2S_DL_24; + break; + case 8: + val_len = RT1015_I2S_DL_8; + break; + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, RT1015_TDM_MASTER, + RT1015_I2S_DL_MASK, val_len); + snd_soc_component_update_bits(component, RT1015_CLK2, + RT1015_FS_PD_MASK, pre_div); + + return 0; +} + +static int rt1015_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + unsigned int reg_val = 0, reg_val2 = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + reg_val |= RT1015_TCON_TDM_MS_M; + break; + case SND_SOC_DAIFMT_CBS_CFS: + reg_val |= RT1015_TCON_TDM_MS_S; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + reg_val2 |= RT1015_TDM_INV_BCLK; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + break; + + case SND_SOC_DAIFMT_LEFT_J: + reg_val |= RT1015_I2S_M_DF_LEFT; + break; + + case SND_SOC_DAIFMT_DSP_A: + reg_val |= RT1015_I2S_M_DF_PCM_A; + break; + + case SND_SOC_DAIFMT_DSP_B: + reg_val |= RT1015_I2S_M_DF_PCM_B; + break; + + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, RT1015_TDM_MASTER, + RT1015_TCON_TDM_MS_MASK | RT1015_I2S_M_DF_MASK, + reg_val); + snd_soc_component_update_bits(component, RT1015_TDM1_1, + RT1015_TDM_INV_BCLK_MASK, reg_val2); + + return 0; +} + +static int rt1015_set_component_sysclk(struct snd_soc_component *component, + int clk_id, int source, unsigned int freq, int dir) +{ + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + unsigned int reg_val = 0; + + if (freq == rt1015->sysclk && clk_id == rt1015->sysclk_src) + return 0; + + switch (clk_id) { + case RT1015_SCLK_S_MCLK: + reg_val |= RT1015_CLK_SYS_PRE_SEL_MCLK; + break; + + case RT1015_SCLK_S_PLL: + reg_val |= RT1015_CLK_SYS_PRE_SEL_PLL; + break; + + default: + dev_err(component->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + + rt1015->sysclk = freq; + rt1015->sysclk_src = clk_id; + + dev_dbg(component->dev, "Sysclk is %dHz and clock id is %d\n", + freq, clk_id); + + snd_soc_component_update_bits(component, RT1015_CLK2, + RT1015_CLK_SYS_PRE_SEL_MASK, reg_val); + + return 0; +} + +static int rt1015_set_component_pll(struct snd_soc_component *component, + int pll_id, int source, unsigned int freq_in, + unsigned int freq_out) +{ + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + struct rl6231_pll_code pll_code; + int ret; + + if (!freq_in || !freq_out) { + dev_dbg(component->dev, "PLL disabled\n"); + + rt1015->pll_in = 0; + rt1015->pll_out = 0; + + return 0; + } + + if (source == rt1015->pll_src && freq_in == rt1015->pll_in && + freq_out == rt1015->pll_out) + return 0; + + switch (source) { + case RT1015_PLL_S_MCLK: + snd_soc_component_update_bits(component, RT1015_CLK2, + RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_PLL_SRC2); + break; + + case RT1015_PLL_S_BCLK: + snd_soc_component_update_bits(component, RT1015_CLK2, + RT1015_PLL_SEL_MASK, RT1015_PLL_SEL_BCLK); + break; + + default: + dev_err(component->dev, "Unknown PLL Source %d\n", source); + return -EINVAL; + } + + ret = rl6231_pll_calc(freq_in, freq_out, &pll_code); + if (ret < 0) { + dev_err(component->dev, "Unsupport input clock %d\n", freq_in); + return ret; + } + + dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n", + pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code), + pll_code.n_code, pll_code.k_code); + + snd_soc_component_write(component, RT1015_PLL1, + (pll_code.m_bp ? 0 : pll_code.m_code) << RT1015_PLL_M_SFT | + pll_code.m_bp << RT1015_PLL_M_BP_SFT | pll_code.n_code); + snd_soc_component_write(component, RT1015_PLL2, + pll_code.k_code); + + rt1015->pll_in = freq_in; + rt1015->pll_out = freq_out; + rt1015->pll_src = source; + + return 0; +} + +static int rt1015_probe(struct snd_soc_component *component) +{ + struct rt1015_priv *rt1015 = + snd_soc_component_get_drvdata(component); + + rt1015->component = component; + + switch (snd_soc_component_read32(component, RT1015_VER_ID) + & RT1015_ID_MASK) { + case RT1015_ID_VERA: + rt1015_reg_init(component); + break; + case RT1015_ID_VERB: + snd_soc_component_write(component, RT1015_BAT_RPO_STEP1, + 0x061c); + break; + default: + dev_err(component->dev, "Unknown version id!\n"); + } + + return 0; +} + +static void rt1015_remove(struct snd_soc_component *component) +{ + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + + regmap_write(rt1015->regmap, RT1015_RESET, 0); +} + +#define RT1015_STEREO_RATES SNDRV_PCM_RATE_8000_192000 +#define RT1015_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) + +struct snd_soc_dai_ops rt1015_aif_dai_ops = { + .hw_params = rt1015_hw_params, + .set_fmt = rt1015_set_dai_fmt, +}; + +struct snd_soc_dai_driver rt1015_dai[] = { + { + .name = "rt1015-aif", + .id = 0, + .playback = { + .stream_name = "AIF Playback", + .channels_min = 1, + .channels_max = 4, + .rates = RT1015_STEREO_RATES, + .formats = RT1015_FORMATS, + }, + } +}; + +#ifdef CONFIG_PM +static int rt1015_suspend(struct snd_soc_component *component) +{ + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1015->regmap, true); + regcache_mark_dirty(rt1015->regmap); + + return 0; +} + +static int rt1015_resume(struct snd_soc_component *component) +{ + struct rt1015_priv *rt1015 = snd_soc_component_get_drvdata(component); + + regcache_cache_only(rt1015->regmap, false); + regcache_sync(rt1015->regmap); + return 0; +} +#else +#define rt1015_suspend NULL +#define rt1015_resume NULL +#endif + +static const struct snd_soc_component_driver soc_component_dev_rt1015 = { + .probe = rt1015_probe, + .remove = rt1015_remove, + .suspend = rt1015_suspend, + .resume = rt1015_resume, + .controls = rt1015_snd_controls, + .num_controls = ARRAY_SIZE(rt1015_snd_controls), + .dapm_widgets = rt1015_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(rt1015_dapm_widgets), + .dapm_routes = rt1015_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(rt1015_dapm_routes), + .set_sysclk = rt1015_set_component_sysclk, + .set_pll = rt1015_set_component_pll, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config rt1015_regmap = { + .reg_bits = 16, + .val_bits = 16, + .max_register = RT1015_S_BST_TIMING_INTER36, + .volatile_reg = rt1015_volatile_register, + .readable_reg = rt1015_readable_register, + .cache_type = REGCACHE_RBTREE, + .reg_defaults = rt1015_reg, + .num_reg_defaults = ARRAY_SIZE(rt1015_reg), +}; + +static const struct i2c_device_id rt1015_i2c_id[] = { + { "rt1015", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, rt1015_i2c_id); + +#if defined(CONFIG_OF) +static const struct of_device_id rt1015_of_match[] = { + { .compatible = "realtek,rt1015", }, + {}, +}; +MODULE_DEVICE_TABLE(of, rt1015_of_match); +#endif + +#ifdef CONFIG_ACPI +static struct acpi_device_id rt1015_acpi_match[] = { + {"10EC1015", 0,}, + {}, +}; +MODULE_DEVICE_TABLE(acpi, rt1015_acpi_match); +#endif + +static int rt1015_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct rt1015_priv *rt1015; + int ret; + unsigned int val; + + rt1015 = devm_kzalloc(&i2c->dev, sizeof(struct rt1015_priv), + GFP_KERNEL); + if (rt1015 == NULL) + return -ENOMEM; + + i2c_set_clientdata(i2c, rt1015); + + rt1015->regmap = devm_regmap_init_i2c(i2c, &rt1015_regmap); + if (IS_ERR(rt1015->regmap)) { + ret = PTR_ERR(rt1015->regmap); + dev_err(&i2c->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + regmap_read(rt1015->regmap, RT1015_DEVICE_ID, &val); + if ((val != RT1015_DEVICE_ID_VAL) && (val != RT1015_DEVICE_ID_VAL2)) { + dev_err(&i2c->dev, + "Device with ID register %x is not rt1015\n", val); + return -ENODEV; + } + + return devm_snd_soc_register_component(&i2c->dev, + &soc_component_dev_rt1015, + rt1015_dai, ARRAY_SIZE(rt1015_dai)); +} + +static void rt1015_i2c_shutdown(struct i2c_client *client) +{ + struct rt1015_priv *rt1015 = i2c_get_clientdata(client); + + regmap_write(rt1015->regmap, RT1015_RESET, 0); +} + +static struct i2c_driver rt1015_i2c_driver = { + .driver = { + .name = "rt1015", + .of_match_table = of_match_ptr(rt1015_of_match), + .acpi_match_table = ACPI_PTR(rt1015_acpi_match), + }, + .probe = rt1015_i2c_probe, + .shutdown = rt1015_i2c_shutdown, + .id_table = rt1015_i2c_id, +}; +module_i2c_driver(rt1015_i2c_driver); + +MODULE_DESCRIPTION("ASoC RT1015 driver"); +MODULE_AUTHOR("Jack Yu <jack.yu(a)realtek.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/rt1015.h b/sound/soc/codecs/rt1015.h new file mode 100644 index 000000000000..8d75cadaa0d5 --- /dev/null +++ b/sound/soc/codecs/rt1015.h @@ -0,0 +1,368 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * rt1015.h -- RT1015 ALSA SoC audio amplifier driver + * + * Copyright 2019 Realtek Semiconductor Corp. + * Author: Jack Yu <jack.yu(a)realtek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __RT1015_H__ +#define __RT1015_H__ + +#define RT1015_DEVICE_ID_VAL 0x1011 +#define RT1015_DEVICE_ID_VAL2 0x1015 + +#define RT1015_RESET 0x0000 +#define RT1015_CLK2 0x0004 +#define RT1015_CLK3 0x0006 +#define RT1015_PLL1 0x000a +#define RT1015_PLL2 0x000c +#define RT1015_CLK_DET 0x0020 +#define RT1015_SIL_DET 0x0022 +#define RT1015_CUSTOMER_ID 0x0076 +#define RT1015_PCODE_FWVER 0x0078 +#define RT1015_VER_ID 0x007a +#define RT1015_VENDOR_ID 0x007c +#define RT1015_DEVICE_ID 0x007d +#define RT1015_PAD_DRV1 0x00f0 +#define RT1015_PAD_DRV2 0x00f2 +#define RT1015_GAT_BOOST 0x00f3 +#define RT1015_PRO_ALT 0x00f4 +#define RT1015_MAN_I2C 0x0100 +#define RT1015_DAC1 0x0102 +#define RT1015_DAC2 0x0104 +#define RT1015_DAC3 0x0106 +#define RT1015_ADC1 0x010c +#define RT1015_ADC2 0x010e +#define RT1015_TDM_MASTER 0x0111 +#define RT1015_TDM_TCON 0x0112 +#define RT1015_TDM1_1 0x0114 +#define RT1015_TDM1_2 0x0116 +#define RT1015_TDM1_3 0x0118 +#define RT1015_TDM1_4 0x011a +#define RT1015_TDM1_5 0x011c +#define RT1015_MIXER1 0x0300 +#define RT1015_MIXER2 0x0302 +#define RT1015_ANA_PROTECT1 0x0311 +#define RT1015_ANA_CTRL_SEQ1 0x0313 +#define RT1015_ANA_CTRL_SEQ2 0x0314 +#define RT1015_VBAT_DET_DEB 0x031a +#define RT1015_VBAT_VOLT_DET1 0x031c +#define RT1015_VBAT_VOLT_DET2 0x031d +#define RT1015_VBAT_TEST_OUT1 0x031e +#define RT1015_VBAT_TEST_OUT2 0x031f +#define RT1015_VBAT_PROT_ATT 0x0320 +#define RT1015_VBAT_DET_CODE 0x0321 +#define RT1015_PWR1 0x0322 +#define RT1015_PWR4 0x0328 +#define RT1015_PWR5 0x0329 +#define RT1015_PWR6 0x032a +#define RT1015_PWR7 0x032b +#define RT1015_PWR8 0x032c +#define RT1015_PWR9 0x032d +#define RT1015_CLASSD_SEQ 0x032e +#define RT1015_SMART_BST_CTRL1 0x0330 +#define RT1015_SMART_BST_CTRL2 0x0332 +#define RT1015_ANA_CTRL1 0x0334 +#define RT1015_ANA_CTRL2 0x0336 +#define RT1015_PWR_STATE_CTRL 0x0338 +#define RT1015_SPK_VOL 0x0506 +#define RT1015_SHORT_DETTOP1 0x0508 +#define RT1015_SHORT_DETTOP2 0x050a +#define RT1015_SPK_DC_DETECT1 0x0519 +#define RT1015_SPK_DC_DETECT2 0x051a +#define RT1015_SPK_DC_DETECT3 0x051b +#define RT1015_SPK_DC_DETECT4 0x051d +#define RT1015_SPK_DC_DETECT5 0x051f +#define RT1015_BAT_RPO_STEP1 0x0536 +#define RT1015_BAT_RPO_STEP2 0x0538 +#define RT1015_BAT_RPO_STEP3 0x053a +#define RT1015_BAT_RPO_STEP4 0x053c +#define RT1015_BAT_RPO_STEP5 0x053d +#define RT1015_BAT_RPO_STEP6 0x053e +#define RT1015_BAT_RPO_STEP7 0x053f +#define RT1015_BAT_RPO_STEP8 0x0540 +#define RT1015_BAT_RPO_STEP9 0x0541 +#define RT1015_BAT_RPO_STEP10 0x0542 +#define RT1015_BAT_RPO_STEP11 0x0543 +#define RT1015_BAT_RPO_STEP12 0x0544 +#define RT1015_SPREAD_SPEC1 0x0568 +#define RT1015_SPREAD_SPEC2 0x056a +#define RT1015_PAD_STATUS 0x1000 +#define RT1015_PADS_PULLING_CTRL1 0x1002 +#define RT1015_PADS_DRIVING 0x1006 +#define RT1015_SYS_RST1 0x1007 +#define RT1015_SYS_RST2 0x1009 +#define RT1015_SYS_GATING1 0x100a +#define RT1015_TEST_MODE1 0x100c +#define RT1015_TEST_MODE2 0x100d +#define RT1015_TIMING_CTRL1 0x100e +#define RT1015_PLL_INT 0x1010 +#define RT1015_TEST_OUT1 0x1020 +#define RT1015_DC_CALIB_CLSD1 0x1200 +#define RT1015_DC_CALIB_CLSD2 0x1202 +#define RT1015_DC_CALIB_CLSD3 0x1204 +#define RT1015_DC_CALIB_CLSD4 0x1206 +#define RT1015_DC_CALIB_CLSD5 0x1208 +#define RT1015_DC_CALIB_CLSD6 0x120a +#define RT1015_DC_CALIB_CLSD7 0x120c +#define RT1015_DC_CALIB_CLSD8 0x120e +#define RT1015_DC_CALIB_CLSD9 0x1210 +#define RT1015_DC_CALIB_CLSD10 0x1212 +#define RT1015_CLSD_INTERNAL1 0x1300 +#define RT1015_CLSD_INTERNAL2 0x1302 +#define RT1015_CLSD_INTERNAL3 0x1304 +#define RT1015_CLSD_INTERNAL4 0x1305 +#define RT1015_CLSD_INTERNAL5 0x1306 +#define RT1015_CLSD_INTERNAL6 0x1308 +#define RT1015_CLSD_INTERNAL7 0x130a +#define RT1015_CLSD_INTERNAL8 0x130c +#define RT1015_CLSD_INTERNAL9 0x130e +#define RT1015_CLSD_OCP_CTRL 0x130f +#define RT1015_VREF_LV 0x1310 +#define RT1015_MBIAS1 0x1312 +#define RT1015_MBIAS2 0x1314 +#define RT1015_MBIAS3 0x1316 +#define RT1015_MBIAS4 0x1318 +#define RT1015_VREF_LV1 0x131a +#define RT1015_S_BST_TIMING_INTER1 0x1322 +#define RT1015_S_BST_TIMING_INTER2 0x1323 +#define RT1015_S_BST_TIMING_INTER3 0x1324 +#define RT1015_S_BST_TIMING_INTER4 0x1325 +#define RT1015_S_BST_TIMING_INTER5 0x1326 +#define RT1015_S_BST_TIMING_INTER6 0x1327 +#define RT1015_S_BST_TIMING_INTER7 0x1328 +#define RT1015_S_BST_TIMING_INTER8 0x1329 +#define RT1015_S_BST_TIMING_INTER9 0x132a +#define RT1015_S_BST_TIMING_INTER10 0x132b +#define RT1015_S_BST_TIMING_INTER11 0x1330 +#define RT1015_S_BST_TIMING_INTER12 0x1331 +#define RT1015_S_BST_TIMING_INTER13 0x1332 +#define RT1015_S_BST_TIMING_INTER14 0x1333 +#define RT1015_S_BST_TIMING_INTER15 0x1334 +#define RT1015_S_BST_TIMING_INTER16 0x1335 +#define RT1015_S_BST_TIMING_INTER17 0x1336 +#define RT1015_S_BST_TIMING_INTER18 0x1337 +#define RT1015_S_BST_TIMING_INTER19 0x1338 +#define RT1015_S_BST_TIMING_INTER20 0x1339 +#define RT1015_S_BST_TIMING_INTER21 0x133a +#define RT1015_S_BST_TIMING_INTER22 0x133b +#define RT1015_S_BST_TIMING_INTER23 0x133c +#define RT1015_S_BST_TIMING_INTER24 0x133d +#define RT1015_S_BST_TIMING_INTER25 0x133e +#define RT1015_S_BST_TIMING_INTER26 0x133f +#define RT1015_S_BST_TIMING_INTER27 0x1340 +#define RT1015_S_BST_TIMING_INTER28 0x1341 +#define RT1015_S_BST_TIMING_INTER29 0x1342 +#define RT1015_S_BST_TIMING_INTER30 0x1343 +#define RT1015_S_BST_TIMING_INTER31 0x1344 +#define RT1015_S_BST_TIMING_INTER32 0x1345 +#define RT1015_S_BST_TIMING_INTER33 0x1346 +#define RT1015_S_BST_TIMING_INTER34 0x1347 +#define RT1015_S_BST_TIMING_INTER35 0x1348 +#define RT1015_S_BST_TIMING_INTER36 0x1349 + +/* 0x0004 */ +#define RT1015_CLK_SYS_PRE_SEL_MASK (0x3 << 14) +#define RT1015_CLK_SYS_PRE_SEL_SFT 14 +#define RT1015_CLK_SYS_PRE_SEL_MCLK (0x0 << 14) +#define RT1015_CLK_SYS_PRE_SEL_PLL (0x2 << 14) +#define RT1015_PLL_SEL_MASK (0x1 << 13) +#define RT1015_PLL_SEL_SFT 13 +#define RT1015_PLL_SEL_PLL_SRC2 (0x0 << 13) +#define RT1015_PLL_SEL_BCLK (0x1 << 13) +#define RT1015_FS_PD_MASK (0x7 << 4) +#define RT1015_FS_PD_SFT 4 + +/* 0x000a */ +#define RT1015_PLL_M_MAX 0xf +#define RT1015_PLL_M_MASK (RT1015_PLL_M_MAX << 12) +#define RT1015_PLL_M_SFT 12 +#define RT1015_PLL_M_BP (0x1 << 11) +#define RT1015_PLL_M_BP_SFT 11 +#define RT1015_PLL_N_MAX 0x1ff +#define RT1015_PLL_N_MASK (RT1015_PLL_N_MAX << 0) +#define RT1015_PLL_N_SFT 0 + +/* 0x000c */ +#define RT1015_PLL_BPK_MASK (0x1 << 5) +#define RT1015_PLL_BPK (0x0 << 5) +#define RT1015_PLL_K_MAX 0x1f +#define RT1015_PLL_K_MASK (RT1015_PLL_K_MAX) +#define RT1015_PLL_K_SFT 0 + +/* 0x007a */ +#define RT1015_ID_MASK 0xff +#define RT1015_ID_VERA 0x0 +#define RT1015_ID_VERB 0x1 + +/* 0x0102 */ +#define RT1015_DAC_VOL_MASK (0x7f << 9) +#define RT1015_DAC_VOL_SFT 9 + +/* 0x0104 */ +#define RT1015_DAC_CLK (0x1 << 13) +#define RT1015_DAC_CLK_BIT 13 + +/* 0x0106 */ +#define RT1015_DAC_MUTE_MASK (0x1 << 15) +#define RT1015_DA_MUTE_SFT 15 +#define RT1015_DVOL_MUTE_FLAG_SFT 12 + +/* 0x0111 */ +#define RT1015_TCON_TDM_MS_MASK (0x1 << 14) +#define RT1015_TCON_TDM_MS_SFT 14 +#define RT1015_TCON_TDM_MS_S (0x0 << 14) +#define RT1015_TCON_TDM_MS_M (0x1 << 14) +#define RT1015_I2S_DL_MASK (0x7 << 8) +#define RT1015_I2S_DL_SFT 8 +#define RT1015_I2S_DL_16 (0x0 << 8) +#define RT1015_I2S_DL_20 (0x1 << 8) +#define RT1015_I2S_DL_24 (0x2 << 8) +#define RT1015_I2S_DL_8 (0x3 << 8) +#define RT1015_I2S_M_DF_MASK (0x7 << 0) +#define RT1015_I2S_M_DF_SFT 0 +#define RT1015_I2S_M_DF_I2S (0x0) +#define RT1015_I2S_M_DF_LEFT (0x1) +#define RT1015_I2S_M_DF_PCM_A (0x2) +#define RT1015_I2S_M_DF_PCM_B (0x3) +#define RT1015_I2S_M_DF_PCM_A_N (0x6) +#define RT1015_I2S_M_DF_PCM_B_N (0x7) + +/* TDM_tcon Setting (0x0112) */ +#define RT1015_I2S_TCON_DF_MASK (0x7 << 13) +#define RT1015_I2S_TCON_DF_SFT 13 +#define RT1015_I2S_TCON_DF_I2S (0x0 << 13) +#define RT1015_I2S_TCON_DF_LEFT (0x1 << 13) +#define RT1015_I2S_TCON_DF_PCM_A (0x2 << 13) +#define RT1015_I2S_TCON_DF_PCM_B (0x3 << 13) +#define RT1015_I2S_TCON_DF_PCM_A_N (0x6 << 13) +#define RT1015_I2S_TCON_DF_PCM_B_N (0x7 << 13) +#define RT1015_TCON_BCLK_SEL_MASK (0x3 << 10) +#define RT1015_TCON_BCLK_SEL_SFT 10 +#define RT1015_TCON_BCLK_SEL_32FS (0x0 << 10) +#define RT1015_TCON_BCLK_SEL_64FS (0x1 << 10) +#define RT1015_TCON_BCLK_SEL_128FS (0x2 << 10) +#define RT1015_TCON_BCLK_SEL_256FS (0x3 << 10) +#define RT1015_TCON_CH_LEN_MASK (0x3 << 5) +#define RT1015_TCON_CH_LEN_SFT 5 +#define RT1015_TCON_CH_LEN_16B (0x0 << 5) +#define RT1015_TCON_CH_LEN_20B (0x1 << 5) +#define RT1015_TCON_CH_LEN_24B (0x2 << 5) +#define RT1015_TCON_CH_LEN_32B (0x3 << 5) +#define RT1015_TCON_BCLK_MST_MASK (0x1 << 4) +#define RT1015_TCON_BCLK_MST_SFT 4 +#define RT1015_TCON_BCLK_MST_INV (0x1 << 4) + +/* TDM1 Setting-1 (0x0114) */ +#define RT1015_TDM_INV_BCLK_MASK (0x1 << 15) +#define RT1015_TDM_INV_BCLK_SFT 15 +#define RT1015_TDM_INV_BCLK (0x1 << 15) + +/* 0x0330 */ +#define RT1015_ABST_AUTO_EN_MASK (0x1 << 13) +#define RT1015_ABST_AUTO_MODE (0x1 << 13) +#define RT1015_ABST_REG_MODE (0x0 << 13) +#define RT1015_ABST_FIX_TGT_MASK (0x1 << 12) +#define RT1015_ABST_FIX_TGT_EN (0x1 << 12) +#define RT1015_ABST_FIX_TGT_DIS (0x0 << 12) +#define RT1015_BYPASS_SWR_REG_MASK (0x1 << 7) +#define RT1015_BYPASS_SWRREG_BYPASS (0x1 << 7) +#define RT1015_BYPASS_SWRREG_PASS (0x0 << 7) + +/* 0x0322 */ +#define RT1015_PWR_LDO2 (0x1 << 15) +#define RT1015_PWR_LDO2_BIT 15 +#define RT1015_PWR_DAC (0x1 << 14) +#define RT1015_PWR_DAC_BIT 14 +#define RT1015_PWR_INTCLK (0x1 << 13) +#define RT1015_PWR_INTCLK_BIT 13 +#define RT1015_PWR_ISENSE (0x1 << 12) +#define RT1015_PWR_ISENSE_BIT 12 +#define RT1015_PWR_VSENSE (0x1 << 10) +#define RT1015_PWR_VSENSE_BIT 10 +#define RT1015_PWR_PLL (0x1 << 9) +#define RT1015_PWR_PLL_BIT 9 +#define RT1015_PWR_BG_1_2 (0x1 << 8) +#define RT1015_PWR_BG_1_2_BIT 8 +#define RT1015_PWR_MBIAS_BG (0x1 << 7) +#define RT1015_PWR_MBIAS_BG_BIT 7 +#define RT1015_PWR_VBAT (0x1 << 6) +#define RT1015_PWR_VBAT_BIT 6 +#define RT1015_PWR_MBIAS (0x1 << 4) +#define RT1015_PWR_MBIAS_BIT 4 +#define RT1015_PWR_ADCV (0x1 << 3) +#define RT1015_PWR_ADCV_BIT 3 +#define RT1015_PWR_MIXERV (0x1 << 2) +#define RT1015_PWR_MIXERV_BIT 2 +#define RT1015_PWR_SUMV (0x1 << 1) +#define RT1015_PWR_SUMV_BIT 1 +#define RT1015_PWR_VREFLV (0x1 << 0) +#define RT1015_PWR_VREFLV_BIT 0 + +/* 0x0324 */ +#define RT1015_PWR_BASIC (0x1 << 15) +#define RT1015_PWR_BASIC_BIT 15 +#define RT1015_PWR_SD (0x1 << 14) +#define RT1015_PWR_SD_BIT 14 +#define RT1015_PWR_IBIAS (0x1 << 13) +#define RT1015_PWR_IBIAS_BIT 13 +#define RT1015_PWR_VCM (0x1 << 11) +#define RT1015_PWR_VCM_BIT 11 + +/* 0x0328 */ +#define RT1015_PWR_SWR (0x1 << 12) +#define RT1015_PWR_SWR_BIT 12 + +/* 0x1300 */ +#define RT1015_PWR_CLSD (0x1 << 12) +#define RT1015_PWR_CLSD_BIT 12 + +/* 0x007a */ +#define RT1015_ID_MASK 0xff +#define RT1015_ID_VERA 0x0 +#define RT1015_ID_VERB 0x1 + +/* System Clock Source */ +enum { + RT1015_SCLK_S_MCLK, + RT1015_SCLK_S_PLL, +}; + +/* PLL1 Source */ +enum { + RT1015_PLL_S_MCLK, + RT1015_PLL_S_BCLK, +}; + +enum { + RT1015_AIF1, + RT1015_AIFS, +}; + +enum { + RT1015_VERA, + RT1015_VERB, +}; + +struct rt1015_priv { + struct snd_soc_component *component; + struct regmap *regmap; + int sysclk; + int sysclk_src; + int lrck; + int bclk; + int id; + int pll_src; + int pll_in; + int pll_out; + int boost_mode; + int bypass_boost; + int amp_ver; +}; + +#endif /* __RT1015_H__ */ -- 2.24.1

3 2

[alsa-devel] [PATCH 00/10] soundwire: bus: fix race conditions, add suspend-resume
by Pierre-Louis Bossart 25 Feb '20

25 Feb '20

The existing mainline code for SoundWire does not handle critical race conditions, and does not have any support for pm_runtime suspend or clock-stop modes needed for e.g. jack detection or external VAD. As suggested by Vinod, these patches for the bus are shared first - with the risk that they are separated from their actual use in Intel drivers, so reviewers might wonder why they are needed in the first place. For reference, the complete set of 90+ patches required for SoundWire on Intel platforms is available here: https://github.com/thesofproject/linux/pull/1692 These patches are not Intel-specific and are likely required for e.g. Qualcomm-based implementations. All the patches in this series were generated during the joint Intel-Realtek validation effort on Intel reference designs and form-factor devices. The support for the initialization_complete signaling is already available in the Realtek codecs drivers merged in the ASoC tree (rt700, rt711, rt1308, rt715) Pierre-Louis Bossart (8): soundwire: bus: fix race condition with probe_complete signaling soundwire: bus: fix race condition with enumeration_complete signaling soundwire: bus: fix race condition with initialization_complete signaling soundwire: bus: add PM/no-PM versions of read/write functions soundwire: bus: write Slave Device Number without runtime_pm soundwire: bus: add helper to clear Slave status to UNATTACHED soundwire: bus: disable pm_runtime in sdw_slave_delete soundwire: bus: don't treat CMD_IGNORED as error on ClockStop Rander Wang (2): soundwire: bus: fix io error when processing alert event soundwire: bus: add clock stop helpers drivers/soundwire/bus.c | 509 ++++++++++++++++++++++++++++++++-- drivers/soundwire/bus.h | 9 + drivers/soundwire/bus_type.c | 5 + drivers/soundwire/slave.c | 4 + include/linux/soundwire/sdw.h | 24 ++ 5 files changed, 526 insertions(+), 25 deletions(-) -- 2.20.1

2 13

[alsa-devel] [PATCH] ASoC: fsl: Add generic CPU DAI driver
by Daniel Baluta (OSS) 25 Feb '20

25 Feb '20

From: Daniel Baluta <daniel.baluta(a)nxp.com> On i.MX8 platforms that have a DSP the DAI handling is taken care of by two entities: * Application Processor (AP), which runs Linux * DSP, which runs a firmware (typically Sound Open Firmware) The DSP has access to DAI IP registers, but it cannot easily handle resources like: * clocks * power domain management * pinctrl For this reason we introduce a generic FSL DAI driver which will take care of the resources above. --- sound/soc/fsl/Kconfig | 8 ++ sound/soc/fsl/Makefile | 2 + sound/soc/fsl/fsl_dai.c | 276 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 286 insertions(+) create mode 100644 sound/soc/fsl/fsl_dai.c diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig index 65e8cd4be930..bea8ab2c24f9 100644 --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -75,6 +75,14 @@ config SND_SOC_FSL_ESAI This option is only useful for out-of-tree drivers since in-tree drivers select it automatically. +config SND_SOC_FSL_DAI + tristate "Generic FSL DAI support for Sound Open Firmware" + help + Say Y if you want to enable generic FSL DAI support to be used + with Sound Open Firmware. This module takes care of enabling + clocks, power domain, pinctrl for FSL DAIs. The rest of DAI + control is taken care of by SOF firmware. + config SND_SOC_FSL_MICFIL tristate "Pulse Density Modulation Microphone Interface (MICFIL) module support" select REGMAP_MMIO diff --git a/sound/soc/fsl/Makefile b/sound/soc/fsl/Makefile index 8cde88c72d93..e4ed253b6657 100644 --- a/sound/soc/fsl/Makefile +++ b/sound/soc/fsl/Makefile @@ -20,6 +20,7 @@ snd-soc-fsl-ssi-y := fsl_ssi.o snd-soc-fsl-ssi-$(CONFIG_DEBUG_FS) += fsl_ssi_dbg.o snd-soc-fsl-spdif-objs := fsl_spdif.o snd-soc-fsl-esai-objs := fsl_esai.o +snd-soc-fsl-dai-objs := fsl_dai.o snd-soc-fsl-micfil-objs := fsl_micfil.o snd-soc-fsl-utils-objs := fsl_utils.o snd-soc-fsl-dma-objs := fsl_dma.o @@ -32,6 +33,7 @@ obj-$(CONFIG_SND_SOC_FSL_SAI) += snd-soc-fsl-sai.o obj-$(CONFIG_SND_SOC_FSL_SSI) += snd-soc-fsl-ssi.o obj-$(CONFIG_SND_SOC_FSL_SPDIF) += snd-soc-fsl-spdif.o obj-$(CONFIG_SND_SOC_FSL_ESAI) += snd-soc-fsl-esai.o +obj-$(CONFIG_SND_SOC_FSL_DAI) += snd-soc-fsl-dai.o obj-$(CONFIG_SND_SOC_FSL_MICFIL) += snd-soc-fsl-micfil.o obj-$(CONFIG_SND_SOC_FSL_UTILS) += snd-soc-fsl-utils.o obj-$(CONFIG_SND_SOC_FSL_MQS) += snd-soc-fsl-mqs.o diff --git a/sound/soc/fsl/fsl_dai.c b/sound/soc/fsl/fsl_dai.c new file mode 100644 index 000000000000..f70889939801 --- /dev/null +++ b/sound/soc/fsl/fsl_dai.c @@ -0,0 +1,276 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Freescale Generic DAI driver for DSP +// +// Copyright 2019 NXP +// Author: Daniel Baluta <daniel.baluta(a)nxp.com> + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> +#include <linux/pm_domain.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +enum fsl_dai_type { + FSL_DAI_TYPE_NONE, + FSL_DAI_TYPE_SAI, + FSL_DAI_TYPE_ESAI, +}; + +#define FSL_DAI_ESAI_CLK_NUM 4 +static const char *esai_clks[FSL_DAI_ESAI_CLK_NUM] = { + "core", + "extal", + "fsys", + "spba", +}; + +#define FSL_DAI_SAI_CLK_NUM 5 +static const char *sai_clks[FSL_DAI_SAI_CLK_NUM] = { + "bus", + "mclk0", + "mclk1", + "mclk2", + "mclk3", +}; + +struct fsl_dai { + struct platform_device *pdev; + + /* DAI clocks */ + struct clk **clks; + const char **clk_names; + int num_clks; + + /* Power Domain handling */ + int num_domains; + struct device **pd_dev; + struct device_link **link; + + /* DAIS */ + struct snd_soc_dai_driver *dai_drv; + int num_drv; +}; + +static struct snd_soc_dai_driver fsl_esai_dai = { + .name = "esai0", +}; + +static struct snd_soc_dai_driver fsl_sai_dai = { + .name = "sai1", +}; + +static const struct snd_soc_component_driver fsl_dai_component = { + .name = "fsl-dai", +}; + +static int fsl_dai_init_clocks(struct fsl_dai *dai_priv) +{ + struct device *dev = &dai_priv->pdev->dev; + int i; + + dai_priv->clks = devm_kcalloc(dev, dai_priv->num_clks, + sizeof(*dai_priv->clks), GFP_KERNEL); + if (!dai_priv->clks) + return -ENOMEM; + + for (i = 0; i < dai_priv->num_clks; i++) { + dai_priv->clks[i] = devm_clk_get(dev, dai_priv->clk_names[i]); + if (IS_ERR(dai_priv->clks[i])) { + dev_dbg(dev, "Failed to get clk %s\n", + dai_priv->clk_names[i]); + dai_priv->clks[i] = NULL; + } + } + + return 0; +} + +int fsl_get_dai_type(struct fsl_dai *dai_priv) +{ + struct device_node *np = dai_priv->pdev->dev.of_node; + + if (of_device_is_compatible(np, "fsl,esai-dai")) + return FSL_DAI_TYPE_ESAI; + + if (of_device_is_compatible(np, "fsl,sai-dai")) + return FSL_DAI_TYPE_SAI; + + return FSL_DAI_TYPE_NONE; +} + +static int fsl_dai_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct fsl_dai *priv; + int dai_type; + int ret; + int i; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pdev = pdev; + + dev_set_drvdata(&pdev->dev, priv); + + dai_type = fsl_get_dai_type(priv); + switch (dai_type) { + case FSL_DAI_TYPE_ESAI: + priv->clk_names = esai_clks; + priv->num_clks = FSL_DAI_ESAI_CLK_NUM; + priv->dai_drv = &fsl_esai_dai; + priv->num_drv = 1; + break; + case FSL_DAI_TYPE_SAI: + priv->clk_names = sai_clks; + priv->num_clks = FSL_DAI_SAI_CLK_NUM; + priv->dai_drv = &fsl_sai_dai; + priv->num_drv = 1; + break; + default: + dev_err(&pdev->dev, "Invalid DAI type %d\n", dai_type); + return -EINVAL; + } + + ret = fsl_dai_init_clocks(priv); + if (ret < 0) { + dev_err(&pdev->dev, "Error at init clocks\n"); + return ret; + } + + priv->num_domains = of_count_phandle_with_args(np, "power-domains", + "#power-domain-cells"); + if (priv->num_domains < 0) { + dev_err(&pdev->dev, "no power-domains property in %pOF\n", np); + return priv->num_domains; + } + + priv->pd_dev = devm_kmalloc_array(&pdev->dev, priv->num_domains, + sizeof(*priv->pd_dev), GFP_KERNEL); + if (!priv->pd_dev) + return -ENOMEM; + + priv->link = devm_kmalloc_array(&pdev->dev, priv->num_domains, + sizeof(*priv->link), GFP_KERNEL); + if (!priv->link) + return -ENOMEM; + + for (i = 0; i < priv->num_domains; i++) { + priv->pd_dev[i] = dev_pm_domain_attach_by_id(&pdev->dev, i); + if (IS_ERR(priv->pd_dev[i])) { + ret = PTR_ERR(priv->pd_dev[i]); + goto unroll_pm; + } + + priv->link[i] = device_link_add(&pdev->dev, priv->pd_dev[i], + DL_FLAG_STATELESS | + DL_FLAG_PM_RUNTIME | + DL_FLAG_RPM_ACTIVE); + if (!priv->link[i]) { + ret = -EINVAL; + dev_pm_domain_detach(priv->pd_dev[i], false); + goto unroll_pm; + } + } + + pm_runtime_enable(&pdev->dev); + + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_dai_component, + priv->dai_drv, priv->num_drv); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to register DAI ret = %d\n", ret); + return ret; + } + return 0; + +unroll_pm: + while (--i >= 0) { + device_link_del(priv->link[i]); + dev_pm_domain_detach(priv->pd_dev[i], false); + } + return ret; +} + +static int fsl_dai_remove(struct platform_device *pdev) +{ + struct fsl_dai *priv = platform_get_drvdata(pdev); + int i; + + pm_runtime_disable(&priv->pdev->dev); + + for (i = 0; i < priv->num_domains; i++) { + device_link_del(priv->link[i]); + dev_pm_domain_detach(priv->pd_dev[i], false); + } + + return 0; +} + +static const struct of_device_id fsl_dai_dt_ids[] = { + { .compatible = "fsl,esai-dai", }, + { .compatible = "fsl,sai-dai", }, + {} +}; +MODULE_DEVICE_TABLE(of, fsl_dai_dt_ids); + +#ifdef CONFIG_PM +static int fsl_dai_runtime_resume(struct device *dev) +{ + struct fsl_dai *priv = dev_get_drvdata(dev); + int i, ret; + + for (i = 0; i < priv->num_clks; i++) { + ret = clk_prepare_enable(priv->clks[i]); + if (ret < 0) { + dev_err(dev, "Failed to enable clk %s\n", + priv->clk_names[i]); + goto out; + } + } + return 0; +out: + while (--i >= 0) + clk_disable_unprepare(priv->clks[i]); + + return ret; +} + +static int fsl_dai_runtime_suspend(struct device *dev) +{ + struct fsl_dai *priv = dev_get_drvdata(dev); + int i; + + for (i = 0; i < priv->num_clks; i++) + clk_disable_unprepare(priv->clks[i]); + + return 0; +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops fsl_dai_pm_ops = { + SET_RUNTIME_PM_OPS(fsl_dai_runtime_suspend, + fsl_dai_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +static struct platform_driver fsl_dai_driver = { + .probe = fsl_dai_probe, + .remove = fsl_dai_remove, + .driver = { + .name = "fsl-dai", + .pm = &fsl_dai_pm_ops, + .of_match_table = fsl_dai_dt_ids, + }, +}; + +module_platform_driver(fsl_dai_driver); + +MODULE_ALIAS("platform:fsl-dai"); + +MODULE_AUTHOR("Daniel Baluta <daniel.baluta(a)nxp.com>"); +MODULE_DESCRIPTION("FSL Generic DAI driver for DSP"); +MODULE_LICENSE("GPL v2"); -- 2.17.1

4 3

[alsa-devel] [PATCH] ASoC: Intel: mrfld: fix incorrect check on p->sink
by Colin King 25 Feb '20

25 Feb '20

From: Colin Ian King <colin.king(a)canonical.com> The check on p->sink looks bogus, I believe it should be p->source since the following code blocks are related to p->source. Fix this by replacing p->sink with p->source. Addresses-Coverity: ("Copy-paste error") Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- [ Note: this has not been tested ] --- sound/soc/intel/atom/sst-atom-controls.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/intel/atom/sst-atom-controls.c b/sound/soc/intel/atom/sst-atom-controls.c index baef461a99f1..f883c9340eee 100644 --- a/sound/soc/intel/atom/sst-atom-controls.c +++ b/sound/soc/intel/atom/sst-atom-controls.c @@ -1333,7 +1333,7 @@ int sst_send_pipe_gains(struct snd_soc_dai *dai, int stream, int mute) dai->capture_widget->name); w = dai->capture_widget; snd_soc_dapm_widget_for_each_source_path(w, p) { - if (p->connected && !p->connected(w, p->sink)) + if (p->connected && !p->connected(w, p->source)) continue; if (p->connect && p->source->power && -- 2.24.0

3 2