September 2019 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] Propagating audio properties along the audio path
by Marc Gonzalez 24 Sep '19

24 Sep '19

Hello everyone, Disclaimer: I've never worked in the sound/ layer, and it is possible that some of my questions are silly or obvious. Basically, I'm trying to implement some form of eARC(*) on an arm64 SoC. (*) enhanced Audio Return Channel (from HDMI 2.1) The setup looks like this: A = Some kind of audio source, typically a TV or game console B = The arm64 SoC, equipped with some nice speakers HDMI A ------> B If we look inside B, we actually have B1 = an eARC receiver (input = HDMI, output = I2S) B2 = an audio DSP (input = I2S, output = speakers) I2S ? B1 -----> B2 -----> speakers If I read the standard right, B is supposed to advertise which audio formats it supports, and A is supposed to pick "the best". For the sake of argument, let's say A picks "PCM, 48 kHz, 8 channels, 16b". At some point, B receives audio packets, parses the Channel Status, and determines that A is sending "PCM, 48 kHz, 8 channels, 16b". The driver then configures the I2S link, and forwards the audio stream over I2S to the DSP. QUESTION_1: How is the DSP supposed to "learn" the properties of the audio stream? (AFAIU, they're not embedded in the data, so there must be some side-channel?) I assume the driver of B1 is supposed to propagate the info to the driver of B2? (Via some call-backs? By calling a function in B2?) QUESTION_2: Does it ever make sense for B2 to ask B1 to change the audio properties? (Not sure if B1 is even allowed to renegotiate.) Regards.

3 6

[alsa-devel] [PATCH 0/2] Add CML M/C for RT5682 and RT1011
by sathya.prakash.m.r＠intel.com 24 Sep '19

24 Sep '19

From: Sathya Prakash M R <sathya.prakash.m.r(a)intel.com> The series adds CML m/c driver with RT5682 on SSP0 and RT1011 on SSP1. The RT1011 is smart AMP which supports 2 Whoofers and 2 tweeter support. RT5682 is headset codec supporting playback and record. The m/c supports HDMI playback and DMIC record. Naveen Manohar (2): ASoC: Intel: boards: Add CML m/c using RT1011 and RT5682 ASoC: Intel: Add acpi match for rt1011 based m/c driver sound/soc/intel/boards/Kconfig | 18 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/cml_rt1011_rt5682.c | 475 ++++++++++++++++++++++ sound/soc/intel/common/soc-acpi-intel-cnl-match.c | 7 + 4 files changed, 502 insertions(+) create mode 100644 sound/soc/intel/boards/cml_rt1011_rt5682.c -- V1: Acked-by:pierre-louis.bossart@linux.intel.com at https://github.com/thesofproject/linux/pull/1161 1.9.1

4 5

[alsa-devel] [PATCH v4] dt-bindings: sound: Convert Samsung I2S controller to dt-schema
by Marek Szyprowski 24 Sep '19

24 Sep '19

From: Maciej Falkowski <m.falkowski(a)samsung.com> Convert Samsung I2S controller to newer dt-schema format. Signed-off-by: Maciej Falkowski <m.falkowski(a)samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski(a)samsung.com> --- v4: - Removed description of i2s device nodes' clocks from 'clocks' property. - Added 'clock-output-names' property. - Added description of clock names. - Added '#clock-cells' property to required properties - Description of the provided clocks moved to samsung-i2s.h in separate patch Best regards, Maciej Falkowski --- .../devicetree/bindings/sound/samsung-i2s.txt | 84 ----------- .../bindings/sound/samsung-i2s.yaml | 136 ++++++++++++++++++ 2 files changed, 136 insertions(+), 84 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/samsung-i2s.txt create mode 100644 Documentation/devicetree/bindings/sound/samsung-i2s.yaml diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt deleted file mode 100644 index a88cb00fa096..000000000000 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Samsung I2S controller - -Required SoC Specific Properties: - -- compatible : should be one of the following. - - samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. - - samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with - secondary fifo, s/w reset control and internal mux for root clk src. - - samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for - playback, stereo channel capture, secondary fifo using internal - or external dma, s/w reset control, internal mux for root clk src - and 7.1 channel TDM support for playback. TDM (Time division multiplexing) - is to allow transfer of multiple channel audio data on single data line. - - samsung,exynos7-i2s: with all the available features of exynos5 i2s, - exynos7 I2S has 7.1 channel TDM support for capture, secondary fifo - with only external dma and more no.of root clk sampling frequencies. - - samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports - stereo channels. exynos7 i2s1 upgraded to 5.1 multichannel with - slightly modified bit offsets. - -- reg: physical base address of the controller and length of memory mapped - region. -- dmas: list of DMA controller phandle and DMA request line ordered pairs. -- dma-names: identifier string for each DMA request line in the dmas property. - These strings correspond 1:1 with the ordered pairs in dmas. -- clocks: Handle to iis clock and RCLK source clk. -- clock-names: - i2s0 uses some base clocks from CMU and some are from audio subsystem internal - clock controller. The clock names for i2s0 should be "iis", "i2s_opclk0" and - "i2s_opclk1" as shown in the example below. - i2s1 and i2s2 uses clocks from CMU. The clock names for i2s1 and i2s2 should - be "iis" and "i2s_opclk0". - "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources of the root - clk. i2s0 has internal mux to select the source of root clk and i2s1 and i2s2 - doesn't have any such mux. -- #clock-cells: should be 1, this property must be present if the I2S device - is a clock provider in terms of the common clock bindings, described in - ../clock/clock-bindings.txt. -- clock-output-names (deprecated): from the common clock bindings, names of - the CDCLK I2S output clocks, suggested values are "i2s_cdclk0", "i2s_cdclk1", - "i2s_cdclk3" for the I2S0, I2S1, I2S2 devices respectively. - -There are following clocks available at the I2S device nodes: - CLK_I2S_CDCLK - the CDCLK (CODECLKO) gate clock, - CLK_I2S_RCLK_PSR - the RCLK prescaler divider clock (corresponding to the - IISPSR register), - CLK_I2S_RCLK_SRC - the RCLKSRC mux clock (corresponding to RCLKSRC bit in - IISMOD register). - -Refer to the SoC datasheet for availability of the above clocks. -The CLK_I2S_RCLK_PSR and CLK_I2S_RCLK_SRC clocks are usually only available -in the IIS Multi Audio Interface. - -Note: Old DTs may not have the #clock-cells property and then not use the I2S -node as a clock supplier. - -Optional SoC Specific Properties: - -- samsung,idma-addr: Internal DMA register base address of the audio - sub system(used in secondary sound source). -- pinctrl-0: Should specify pin control groups used for this controller. -- pinctrl-names: Should contain only one value - "default". -- #sound-dai-cells: should be 1. - - -Example: - -i2s0: i2s@3830000 { - compatible = "samsung,s5pv210-i2s"; - reg = <0x03830000 0x100>; - dmas = <&pdma0 10 - &pdma0 9 - &pdma0 8>; - dma-names = "tx", "rx", "tx-sec"; - clocks = <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_I2S_BUS>, - <&clock_audss EXYNOS_SCLK_I2S>; - clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; - #clock-cells = <1>; - samsung,idma-addr = <0x03000000>; - pinctrl-names = "default"; - pinctrl-0 = <&i2s0_bus>; - #sound-dai-cells = <1>; -}; diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.yaml b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml new file mode 100644 index 000000000000..7d2750c26f11 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.yaml @@ -0,0 +1,136 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/samsung-i2s.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC I2S controller + +maintainers: + - Krzysztof Kozlowski <krzk(a)kernel.org> + - Sylwester Nawrocki <s.nawrocki(a)samsung.com> + +properties: + compatible: + description: | + samsung,s3c6410-i2s: for 8/16/24bit stereo I2S. + + samsung,s5pv210-i2s: for 8/16/24bit multichannel(5.1) I2S with + secondary fifo, s/w reset control and internal mux for root clk src. + + samsung,exynos5420-i2s: for 8/16/24bit multichannel(5.1) I2S for + playback, stereo channel capture, secondary fifo using internal + or external dma, s/w reset control, internal mux for root clk src + and 7.1 channel TDM support for playback. TDM (Time division multiplexing) + is to allow transfer of multiple channel audio data on single data line. + + samsung,exynos7-i2s: with all the available features of exynos5 i2s. + exynos7 I2S has 7.1 channel TDM support for capture, secondary fifo + with only external dma and more no.of root clk sampling frequencies. + + samsung,exynos7-i2s1: I2S1 on previous samsung platforms supports + stereo channels. exynos7 i2s1 upgraded to 5.1 multichannel with + slightly modified bit offsets. + enum: + - samsung,s3c6410-i2s + - samsung,s5pv210-i2s + - samsung,exynos5420-i2s + - samsung,exynos7-i2s + - samsung,exynos7-i2s1 + + reg: + maxItems: 1 + + dmas: + minItems: 2 + maxItems: 3 + + dma-names: + oneOf: + - items: + - const: tx + - const: rx + - items: + - const: tx + - const: rx + - const: tx-sec + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + oneOf: + - items: + - const: iis + - items: # for i2s0 + - const: iis + - const: i2s_opclk0 + - const: i2s_opclk1 + - items: # for i2s1 and i2s2 + - const: iis + - const: i2s_opclk0 + description: | + "iis" is the i2s bus clock and i2s_opclk0, i2s_opclk1 are sources + of the root clk. i2s0 has internal mux to select the source + of root clk and i2s1 and i2s2 doesn't have any such mux. + + "#clock-cells": + const: 1 + + clock-output-names: # deprecated + oneOf: + - items: # for i2s0 + - const: i2s_cdclk0 + - items: # for i2s1 + - const: i2s_cdclk1 + - items: # for i2s2 + - const: i2s_cdclk2 + description: Names of the CDCLK I2S output clocks. + + samsung,idma-addr: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Internal DMA register base address of the audio + sub system(used in secondary sound source). + + pinctrl-0: + description: Should specify pin control groups used for this controller. + + pinctrl-names: + const: default + + "#sound-dai-cells": + const: 1 + +required: + - compatible + - reg + - dmas + - dma-names + - clocks + - clock-names + - "#clock-cells" + +examples: + - | + #include <dt-bindings/clock/exynos-audss-clk.h> + + i2s0: i2s@3830000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0x03830000 0x100>; + dmas = <&pdma0 10>, + <&pdma0 9>, + <&pdma0 8>; + dma-names = "tx", "rx", "tx-sec"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; + #clock-cells = <1>; + samsung,idma-addr = <0x03000000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <1>; + }; + -- 2.17.1

2 1

[alsa-devel] [PATCH] ALSA: usb-audio: Add DSD support for EVGA NU Audio
by Jussi Laako 24 Sep '19

24 Sep '19

EVGA NU Audio is actually a USB audio device on a PCIexpress card, with it's own USB controller. It supports both PCM and DSD. Signed-off-by: Jussi Laako <jussi(a)sonarnerd.net> --- sound/usb/quirks.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 5fd4ccce452d..fbfde996fee7 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1658,6 +1658,7 @@ u64 snd_usb_interface_dsd_format_quirks(struct snd_usb_audio *chip, case 0x25ce: /* Mytek devices */ case 0x278b: /* Rotel? */ case 0x2ab6: /* T+A devices */ + case 0x3842: /* EVGA */ case 0xc502: /* HiBy devices */ if (fp->dsd_raw) return SNDRV_PCM_FMTBIT_DSD_U32_BE; -- 2.17.1

2 1

[alsa-devel] [PATCH alsa-lib] pcm: chmap: Fix memory leak at snd_pcm_set_chmap()
by Takashi Iwai 24 Sep '19

24 Sep '19

snd_pcm_set_chmap() leaks the memory returned from snd_pcm_get_chmap() without releasing. Add the missing free() call as well as a slight code refactoring. Reported-by: Conrad Jones BugLink: https://github.com/alsa-project/alsa-lib/pull/11 Fixes: d20e24e5d161 ("chmap: Always succeed setting the map to what it already is") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- src/pcm/pcm.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 178d43875f00..d6bf31ac7ae3 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -8099,8 +8099,13 @@ snd_pcm_chmap_t *snd_pcm_get_chmap(snd_pcm_t *pcm) */ int snd_pcm_set_chmap(snd_pcm_t *pcm, const snd_pcm_chmap_t *map) { - const snd_pcm_chmap_t *oldmap = snd_pcm_get_chmap(pcm); - if (oldmap && chmap_equal(oldmap, map)) + const snd_pcm_chmap_t *oldmap; + int nochange; + + oldmap = snd_pcm_get_chmap(pcm); + nochange = (oldmap && chmap_equal(oldmap, map)); + free((void *)oldmap); + if (nochange) return 0; if (!pcm->ops->set_chmap) -- 2.16.4

1 0

[alsa-devel] TDM audio support and sample size updates for tegra30
by Ben Dooks 24 Sep '19

24 Sep '19

A patch series for TDM audio, non 16bit sample size and a small fifo fix for tegra30 series SoC. Changes since v1: - moved edge-control and data-offset to the set_fmt callbacks - fixed dev_dbg in set_tdm callback - fixed dev_dbg message contents in set_tdm callback - changed fsync width to be permanently 1 clock

3 11

Re: [alsa-devel] [PATCH V3 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8
by S.j. Wang 24 Sep '19

24 Sep '19

Hi > > One issue for error-out and some nit-pickings inline. Thanks. > > On Thu, Sep 19, 2019 at 08:11:42PM +0800, Shengjiu Wang wrote: > > There is error "aplay: pcm_write:2023: write error: Input/output error" > > on i.MX8QM/i.MX8QXP platform for S24_3LE format. > > > > In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit > > sample, but we didn't add any constraint, that cause issues. > > > > So we need to query the caps of dma, then update the hw parameters > > according to the caps. > > > > Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> > > --- > > sound/soc/fsl/fsl_asrc.c | 4 +-- > > sound/soc/fsl/fsl_asrc.h | 3 +++ > > sound/soc/fsl/fsl_asrc_dma.c | 52 > > +++++++++++++++++++++++++++++++----- > > 3 files changed, 50 insertions(+), 9 deletions(-) > > > > @@ -276,6 +274,11 @@ static int fsl_asrc_dma_startup(struct > snd_pcm_substream *substream) > > struct device *dev = component->dev; > > struct fsl_asrc *asrc_priv = dev_get_drvdata(dev); > > struct fsl_asrc_pair *pair; > > + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; > > + u8 dir = tx ? OUT : IN; > > + struct dma_chan *tmp_chan; > > + struct snd_dmaengine_dai_dma_data *dma_data; > > Nit: would it be possible to reorganize these a bit? Usually we put struct > things together unless there is a dependency, similar to > fsl_asrc_dma_hw_params(). > > > @@ -285,9 +288,44 @@ static int fsl_asrc_dma_startup(struct > > snd_pcm_substream *substream) > > > > runtime->private_data = pair; > > > > + /* Request a temp pair, which is release in the end */ > > Nit: "which will be released later" or "and will release it later"? And could > we use a work like "dummy"? Or at least I would love to see the comments > explaining the parameter "1" > in the function call below. > > > + ret = fsl_asrc_request_pair(1, pair); > > + if (ret < 0) { > > + dev_err(dev, "failed to request asrc pair\n"); > > + return ret; > > + } > > + > > + tmp_chan = fsl_asrc_get_dma_channel(pair, dir); > > + if (!tmp_chan) { > > + dev_err(dev, "can't get dma channel\n"); > > Could we align with other error messages using "failed to"? > > > + ret = snd_soc_set_runtime_hwparams(substream, > &snd_imx_hardware); > > + if (ret) > > + return ret; > > + > [...] > > + dma_release_channel(tmp_chan); > > + fsl_asrc_release_pair(pair); > > I think we need an "out:" here for those error-out routines to goto. > Otherwise, it'd be a pair leak? > > > + > > Could we drop this? There is a blank line below already :) > Will update them. Best regards Wang Shengjiu

1 0

[alsa-devel] [PATCH] ASoC: soc-component: fix a couple missing error assignments
by Dan Carpenter 23 Sep '19

23 Sep '19

There were a couple places where the return value wasn't assigned so the error handling wouldn't trigger. Fixes: 5c0769af4caf ("ASoC: soc-dai: add snd_soc_dai_bespoke_trigger()") Fixes: 95aef3553384 ("ASoC: soc-dai: add snd_soc_dai_trigger()") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> --- sound/soc/soc-pcm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index e163dde5eab1..a1b99ac57d9e 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -1070,7 +1070,7 @@ static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd) return ret; } - snd_soc_dai_trigger(cpu_dai, substream, cmd); + ret = snd_soc_dai_trigger(cpu_dai, substream, cmd); if (ret < 0) return ret; @@ -1097,7 +1097,7 @@ static int soc_pcm_bespoke_trigger(struct snd_pcm_substream *substream, return ret; } - snd_soc_dai_bespoke_trigger(cpu_dai, substream, cmd); + ret = snd_soc_dai_bespoke_trigger(cpu_dai, substream, cmd); if (ret < 0) return ret; -- 2.20.1

2 1

[alsa-devel] [PATCH trivial] sound: Fix Kconfig indentation
by Krzysztof Kozlowski 23 Sep '19

23 Sep '19

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> --- sound/core/Kconfig | 28 ++++++++++---------- sound/drivers/Kconfig | 20 +++++++------- sound/firewire/Kconfig | 6 ++--- sound/isa/Kconfig | 18 ++++++------- sound/mips/Kconfig | 12 ++++----- sound/pci/Kconfig | 2 +- sound/soc/cirrus/Kconfig | 14 +++++----- sound/soc/codecs/Kconfig | 32 +++++++++++------------ sound/soc/intel/Kconfig | 2 +- sound/soc/intel/boards/Kconfig | 48 +++++++++++++++++----------------- sound/soc/pxa/Kconfig | 16 ++++++------ sound/soc/qcom/Kconfig | 20 +++++++------- sound/soc/samsung/Kconfig | 8 +++--- sound/soc/sof/imx/Kconfig | 12 ++++----- sound/soc/sof/intel/Kconfig | 22 ++++++++-------- sound/soc/xilinx/Kconfig | 20 +++++++------- sound/soc/zte/Kconfig | 12 ++++----- sound/usb/Kconfig | 32 +++++++++++------------ 18 files changed, 162 insertions(+), 162 deletions(-) diff --git a/sound/core/Kconfig b/sound/core/Kconfig index 4ee79ad6ae22..4044c42d8595 100644 --- a/sound/core/Kconfig +++ b/sound/core/Kconfig @@ -72,11 +72,11 @@ config SND_PCM_OSS config SND_PCM_OSS_PLUGINS bool "OSS PCM (digital audio) API - Include plugin system" depends on SND_PCM_OSS - default y + default y help - If you disable this option, the ALSA's OSS PCM API will not - support conversion of channels, formats and rates. It will - behave like most of new OSS/Free drivers in 2.4/2.6 kernels. + If you disable this option, the ALSA's OSS PCM API will not + support conversion of channels, formats and rates. It will + behave like most of new OSS/Free drivers in 2.4/2.6 kernels. config SND_PCM_TIMER bool "PCM timer interface" if EXPERT @@ -128,13 +128,13 @@ config SND_SUPPORT_OLD_API or older). config SND_PROC_FS - bool "Sound Proc FS Support" if EXPERT - depends on PROC_FS - default y - help - Say 'N' to disable Sound proc FS, which may reduce code size about - 9KB on x86_64 platform. - If unsure say Y. + bool "Sound Proc FS Support" if EXPERT + depends on PROC_FS + default y + help + Say 'N' to disable Sound proc FS, which may reduce code size about + 9KB on x86_64 platform. + If unsure say Y. config SND_VERBOSE_PROCFS bool "Verbose procfs contents" @@ -142,8 +142,8 @@ config SND_VERBOSE_PROCFS default y help Say Y here to include code for verbose procfs contents (provides - useful information to developers when a problem occurs). On the - other side, it makes the ALSA subsystem larger. + useful information to developers when a problem occurs). On the + other side, it makes the ALSA subsystem larger. config SND_VERBOSE_PRINTK bool "Verbose printk" @@ -164,7 +164,7 @@ config SND_DEBUG_VERBOSE depends on SND_DEBUG help Say Y here to enable extra-verbose debugging messages. - + Let me repeat: it enables EXTRA-VERBOSE DEBUGGING messages. So, say Y only if you are ready to be annoyed. diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig index 09932cc98e9d..15d6d46acf9c 100644 --- a/sound/drivers/Kconfig +++ b/sound/drivers/Kconfig @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only config SND_MPU401_UART - tristate - select SND_RAWMIDI + tristate + select SND_RAWMIDI config SND_OPL3_LIB tristate @@ -90,16 +90,16 @@ config SND_DUMMY will be called snd-dummy. config SND_ALOOP - tristate "Generic loopback driver (PCM)" - select SND_PCM - help - Say 'Y' or 'M' to include support for the PCM loopback device. + tristate "Generic loopback driver (PCM)" + select SND_PCM + help + Say 'Y' or 'M' to include support for the PCM loopback device. This module returns played samples back to the user space using the standard ALSA PCM device. The devices are routed 0->1 and - 1->0, where first number is the playback PCM device and second + 1->0, where first number is the playback PCM device and second number is the capture device. Module creates two PCM devices and configured number of substreams (see the pcm_substreams module - parameter). + parameter). The loopback device allows time sychronization with an external timing source using the time shift universal control (+-20% @@ -142,12 +142,12 @@ config SND_MTS64 select SND_RAWMIDI help The ESI Miditerminal 4140 is a 4 In 4 Out MIDI Interface with - additional SMPTE Timecode capabilities for the parallel port. + additional SMPTE Timecode capabilities for the parallel port. Say 'Y' to include support for this device. To compile this driver as a module, chose 'M' here: the module - will be called snd-mts64. + will be called snd-mts64. config SND_SERIAL_U16550 tristate "UART16550 serial MIDI driver" diff --git a/sound/firewire/Kconfig b/sound/firewire/Kconfig index b0a904cdb932..995c2cefc222 100644 --- a/sound/firewire/Kconfig +++ b/sound/firewire/Kconfig @@ -77,7 +77,7 @@ config SND_BEBOB tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware" select SND_FIREWIRE_LIB select SND_HWDEP - help + help Say Y here to include support for FireWire devices based on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware: * Edirol FA-66/FA-101 @@ -111,8 +111,8 @@ config SND_BEBOB * M-Audio FireWire 1814/ProjectMix IO * Digidesign Mbox 2 Pro - To compile this driver as a module, choose M here: the module - will be called snd-bebob. + To compile this driver as a module, choose M here: the module + will be called snd-bebob. config SND_FIREWIRE_DIGI00X tristate "Digidesign Digi 002/003 family support" diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index b690ed937cbe..6ffa48dd5983 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -2,22 +2,22 @@ # ALSA ISA drivers config SND_WSS_LIB - tristate - select SND_PCM + tristate + select SND_PCM select SND_TIMER config SND_SB_COMMON - tristate + tristate config SND_SB8_DSP - tristate - select SND_PCM - select SND_SB_COMMON + tristate + select SND_PCM + select SND_SB_COMMON config SND_SB16_DSP - tristate - select SND_PCM - select SND_SB_COMMON + tristate + select SND_PCM + select SND_SB_COMMON menuconfig SND_ISA bool "ISA sound devices" diff --git a/sound/mips/Kconfig b/sound/mips/Kconfig index 8a33402fd415..b497b803c834 100644 --- a/sound/mips/Kconfig +++ b/sound/mips/Kconfig @@ -14,15 +14,15 @@ config SND_SGI_O2 tristate "SGI O2 Audio" depends on SGI_IP32 select SND_PCM - help - Sound support for the SGI O2 Workstation. + help + Sound support for the SGI O2 Workstation. config SND_SGI_HAL2 - tristate "SGI HAL2 Audio" - depends on SGI_HAS_HAL2 + tristate "SGI HAL2 Audio" + depends on SGI_HAS_HAL2 select SND_PCM - help - Sound support for the SGI Indy and Indigo2 Workstation. + help + Sound support for the SGI Indy and Indigo2 Workstation. endif # SND_MIPS diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 7630f808d087..93bc9bef7641 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -217,7 +217,7 @@ config SND_CMIPCI will be called snd-cmipci. config SND_OXYGEN_LIB - tristate + tristate config SND_OXYGEN tristate "C-Media 8786, 8787, 8788 (Oxygen)" diff --git a/sound/soc/cirrus/Kconfig b/sound/soc/cirrus/Kconfig index 2333efac758a..8039a8febefa 100644 --- a/sound/soc/cirrus/Kconfig +++ b/sound/soc/cirrus/Kconfig @@ -33,13 +33,13 @@ config SND_EP93XX_SOC_AC97 select SND_SOC_AC97_BUS config SND_EP93XX_SOC_SNAPPERCL15 - tristate "SoC Audio support for Bluewater Systems Snapper CL15 module" - depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15 && I2C - select SND_EP93XX_SOC_I2S - select SND_SOC_TLV320AIC23_I2C - help - Say Y or M here if you want to add support for I2S audio on the - Bluewater Systems Snapper CL15 module. + tristate "SoC Audio support for Bluewater Systems Snapper CL15 module" + depends on SND_EP93XX_SOC && MACH_SNAPPER_CL15 && I2C + select SND_EP93XX_SOC_I2S + select SND_SOC_TLV320AIC23_I2C + help + Say Y or M here if you want to add support for I2S audio on the + Bluewater Systems Snapper CL15 module. config SND_EP93XX_SOC_SIMONE tristate "SoC Audio support for Simplemachines Sim.One board" diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 229cc89f8c5a..ef9d73b89623 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -257,16 +257,16 @@ config SND_SOC_ALL_CODECS select SND_SOC_WM9705 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) select SND_SOC_WM9712 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) select SND_SOC_WM9713 if (SND_SOC_AC97_BUS || SND_SOC_AC97_BUS_NEW) - help - Normally ASoC codec drivers are only built if a machine driver which - uses them is also built since they are only usable with a machine - driver. Selecting this option will allow these drivers to be built - without an explicit machine driver for test and development purposes. + help + Normally ASoC codec drivers are only built if a machine driver which + uses them is also built since they are only usable with a machine + driver. Selecting this option will allow these drivers to be built + without an explicit machine driver for test and development purposes. Support for the bus types used to access the codecs to be built must be selected separately. - If unsure select "N". + If unsure select "N". config SND_SOC_88PM860X tristate @@ -570,8 +570,8 @@ config SND_SOC_CS42XX8_I2C # Cirrus Logic CS43130 HiFi DAC config SND_SOC_CS43130 - tristate "Cirrus Logic CS43130 CODEC" - depends on I2C + tristate "Cirrus Logic CS43130 CODEC" + depends on I2C config SND_SOC_CS4341 tristate "Cirrus Logic CS4341 CODEC" @@ -643,19 +643,19 @@ config SND_SOC_L3 tristate config SND_SOC_DA7210 - tristate + tristate config SND_SOC_DA7213 - tristate + tristate config SND_SOC_DA7218 tristate config SND_SOC_DA7219 - tristate + tristate config SND_SOC_DA732X - tristate + tristate config SND_SOC_DA9055 tristate @@ -717,7 +717,7 @@ config SND_SOC_INNO_RK3036 select REGMAP_MMIO config SND_SOC_ISABELLE - tristate + tristate config SND_SOC_LM49453 tristate @@ -988,7 +988,7 @@ config SND_SOC_RT5640 tristate config SND_SOC_RT5645 - tristate + tristate config SND_SOC_RT5651 tristate @@ -1220,7 +1220,7 @@ config SND_SOC_UDA134X tristate config SND_SOC_UDA1380 - tristate + tristate depends on I2C config SND_SOC_WCD9335 @@ -1348,7 +1348,7 @@ config SND_SOC_WM8904 depends on I2C config SND_SOC_WM8940 - tristate + tristate config SND_SOC_WM8955 tristate diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 01c99750212a..597516c0c192 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -113,7 +113,7 @@ config SND_SOC_INTEL_SKYLAKE select SND_SOC_INTEL_CNL select SND_SOC_INTEL_CFL help - This is a backwards-compatible option to select all devices + This is a backwards-compatible option to select all devices supported by the Intel SST/Skylake driver. This option is no longer recommended and will be deprecated when the SOF driver is introduced. Distributions should explicitly diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig index 5c27f7ab4a5f..882ff36a7c9c 100644 --- a/sound/soc/intel/boards/Kconfig +++ b/sound/soc/intel/boards/Kconfig @@ -3,13 +3,13 @@ menuconfig SND_SOC_INTEL_MACH bool "Intel Machine drivers" depends on SND_SOC_INTEL_SST_TOPLEVEL || SND_SOC_SOF_INTEL_TOPLEVEL help - Intel ASoC Machine Drivers. If you have a Intel machine that - has an audio controller with a DSP and I2S or DMIC port, then - enable this option by saying Y + Intel ASoC Machine Drivers. If you have a Intel machine that + has an audio controller with a DSP and I2S or DMIC port, then + enable this option by saying Y - Note that the answer to this question doesn't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about Intel ASoC machine drivers. + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Intel ASoC machine drivers. if SND_SOC_INTEL_MACH @@ -114,11 +114,11 @@ config SND_SOC_INTEL_CHT_BSW_RT5672_MACH depends on X86_INTEL_LPSS || COMPILE_TEST select SND_SOC_ACPI select SND_SOC_RT5670 - help - This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell - platforms with RT5672 audio codec. - Say Y or m if you have such a device. This is a recommended option. - If unsure select "N". + help + This adds support for ASoC machine driver for Intel(R) Cherrytrail & Braswell + platforms with RT5672 audio codec. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". config SND_SOC_INTEL_CHT_BSW_RT5645_MACH tristate "Cherrytrail & Braswell with RT5645/5650 codec" @@ -311,20 +311,20 @@ config SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH If unsure select "N". config SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH - tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" + tristate "KBL with RT5663, RT5514 and MAX98927 in I2S Mode" depends on I2C && ACPI depends on MFD_INTEL_LPSS || COMPILE_TEST - depends on SPI - select SND_SOC_RT5663 - select SND_SOC_RT5514 - select SND_SOC_RT5514_SPI - select SND_SOC_MAX98927 - select SND_SOC_HDAC_HDMI - help - This adds support for ASoC Onboard Codec I2S machine driver. This will - create an alsa sound card for RT5663 + RT5514 + MAX98927. - Say Y or m if you have such a device. This is a recommended option. - If unsure select "N". + depends on SPI + select SND_SOC_RT5663 + select SND_SOC_RT5514 + select SND_SOC_RT5514_SPI + select SND_SOC_MAX98927 + select SND_SOC_HDAC_HDMI + help + This adds support for ASoC Onboard Codec I2S machine driver. This will + create an alsa sound card for RT5663 + RT5514 + MAX98927. + Say Y or m if you have such a device. This is a recommended option. + If unsure select "N". config SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH tristate "KBL with DA7219 and MAX98357A in I2S Mode" @@ -393,7 +393,7 @@ config SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH help This adds support for ASoC machine driver for Intel platforms SKL/KBL/BXT/APL with iDisp, HDA audio codecs. - Say Y or m if you have such a device. This is a recommended option. + Say Y or m if you have such a device. This is a recommended option. If unsure select "N". endif ## SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC || SND_SOC_SOF_HDA_AUDIO_CODEC diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 213d4dab0346..295cfffa4646 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -190,14 +190,14 @@ config SND_PXA2XX_SOC_MAGICIAN HTC Magician. config SND_PXA2XX_SOC_MIOA701 - tristate "SoC Audio support for MIO A701" - depends on SND_PXA2XX_SOC && MACH_MIOA701 + tristate "SoC Audio support for MIO A701" + depends on SND_PXA2XX_SOC && MACH_MIOA701 depends on AC97_BUS=n - select SND_PXA2XX_SOC_AC97 - select SND_SOC_WM9713 - help - Say Y if you want to add support for SoC audio on the - MIO A701. + select SND_PXA2XX_SOC_AC97 + select SND_SOC_WM9713 + help + Say Y if you want to add support for SoC audio on the + MIO A701. config SND_PXA2XX_SOC_IMOTE2 tristate "SoC Audio support for IMote 2" @@ -205,7 +205,7 @@ config SND_PXA2XX_SOC_IMOTE2 select SND_PXA2XX_SOC_I2S select SND_SOC_WM8940 help - Say Y if you want to add support for SoC audio on the + Say Y if you want to add support for SoC audio on the IMote 2. config SND_MMP_SOC_BROWNSTONE diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 60086858e920..6530d2462a9e 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -3,8 +3,8 @@ config SND_SOC_QCOM tristate "ASoC support for QCOM platforms" depends on ARCH_QCOM || COMPILE_TEST help - Say Y or M if you want to add support to use audio devices - in Qualcomm Technologies SOC-based platforms. + Say Y or M if you want to add support to use audio devices + in Qualcomm Technologies SOC-based platforms. config SND_SOC_LPASS_CPU tristate @@ -30,17 +30,17 @@ config SND_SOC_STORM select SND_SOC_LPASS_IPQ806X select SND_SOC_MAX98357A help - Say Y or M if you want add support for SoC audio on the - Qualcomm Technologies IPQ806X-based Storm board. + Say Y or M if you want add support for SoC audio on the + Qualcomm Technologies IPQ806X-based Storm board. config SND_SOC_APQ8016_SBC tristate "SoC Audio support for APQ8016 SBC platforms" depends on SND_SOC_QCOM select SND_SOC_LPASS_APQ8016 help - Support for Qualcomm Technologies LPASS audio block in - APQ8016 SOC-based systems. - Say Y if you want to use audio devices on MI2S. + Support for Qualcomm Technologies LPASS audio block in + APQ8016 SOC-based systems. + Say Y if you want to use audio devices on MI2S. config SND_SOC_QCOM_COMMON tristate @@ -93,9 +93,9 @@ config SND_SOC_MSM8996 select SND_SOC_QDSP6 select SND_SOC_QCOM_COMMON help - Support for Qualcomm Technologies LPASS audio block in - APQ8096 SoC-based systems. - Say Y if you want to use audio device on this SoCs + Support for Qualcomm Technologies LPASS audio block in + APQ8096 SoC-based systems. + Say Y if you want to use audio device on this SoCs config SND_SOC_SDM845 tristate "SoC Machine driver for SDM845 boards" diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig index 638983123d8f..9304177de78a 100644 --- a/sound/soc/samsung/Kconfig +++ b/sound/soc/samsung/Kconfig @@ -195,10 +195,10 @@ config SND_SOC_ODROID Say Y here to enable audio support for the Odroid XU3/XU4. config SND_SOC_ARNDALE_RT5631_ALC5631 - tristate "Audio support for RT5631(ALC5631) on Arndale Board" - depends on I2C - select SND_SAMSUNG_I2S - select SND_SOC_RT5631 + tristate "Audio support for RT5631(ALC5631) on Arndale Board" + depends on I2C + select SND_SAMSUNG_I2S + select SND_SOC_RT5631 config SND_SOC_SAMSUNG_TM2_WM5110 tristate "SoC I2S Audio support for WM5110 on TM2 board" diff --git a/sound/soc/sof/imx/Kconfig b/sound/soc/sof/imx/Kconfig index 5acae75f5750..6315fba8ce71 100644 --- a/sound/soc/sof/imx/Kconfig +++ b/sound/soc/sof/imx/Kconfig @@ -5,9 +5,9 @@ config SND_SOC_SOF_IMX_TOPLEVEL depends on ARM64|| COMPILE_TEST depends on SND_SOC_SOF_OF help - This adds support for Sound Open Firmware for NXP i.MX platforms. - Say Y if you have such a device. - If unsure select "N". + This adds support for Sound Open Firmware for NXP i.MX platforms. + Say Y if you have such a device. + If unsure select "N". if SND_SOC_SOF_IMX_TOPLEVEL @@ -16,8 +16,8 @@ config SND_SOC_SOF_IMX8 depends on IMX_SCU depends on IMX_DSP help - This adds support for Sound Open Firmware for NXP i.MX8 platforms - Say Y if you have such a device. - If unsure select "N". + This adds support for Sound Open Firmware for NXP i.MX8 platforms + Say Y if you have such a device. + If unsure select "N". endif ## SND_SOC_SOF_IMX_IMX_TOPLEVEL diff --git a/sound/soc/sof/intel/Kconfig b/sound/soc/sof/intel/Kconfig index 479ba249e219..18c41fdc47c8 100644 --- a/sound/soc/sof/intel/Kconfig +++ b/sound/soc/sof/intel/Kconfig @@ -36,7 +36,7 @@ config SND_SOC_SOF_INTEL_PCI config SND_SOC_SOF_INTEL_HIFI_EP_IPC tristate help - This option is not user-selectable but automagically handled by + This option is not user-selectable but automagically handled by 'select' statements at a higher level config SND_SOC_SOF_INTEL_ATOM_HIFI_EP @@ -217,31 +217,31 @@ config SND_SOC_SOF_COMETLAKE_H_SUPPORT config SND_SOC_SOF_TIGERLAKE_SUPPORT bool "SOF support for Tigerlake" help - This adds support for Sound Open Firmware for Intel(R) platforms - using the Tigerlake processors. - Say Y if you have such a device. - If unsure select "N". + This adds support for Sound Open Firmware for Intel(R) platforms + using the Tigerlake processors. + Say Y if you have such a device. + If unsure select "N". config SND_SOC_SOF_TIGERLAKE tristate select SND_SOC_SOF_HDA_COMMON help - This option is not user-selectable but automagically handled by + This option is not user-selectable but automagically handled by 'select' statements at a higher level config SND_SOC_SOF_ELKHARTLAKE_SUPPORT bool "SOF support for ElkhartLake" help - This adds support for Sound Open Firmware for Intel(R) platforms - using the ElkhartLake processors. - Say Y if you have such a device. - If unsure select "N". + This adds support for Sound Open Firmware for Intel(R) platforms + using the ElkhartLake processors. + Say Y if you have such a device. + If unsure select "N". config SND_SOC_SOF_ELKHARTLAKE tristate select SND_SOC_SOF_HDA_COMMON help - This option is not user-selectable but automagically handled by + This option is not user-selectable but automagically handled by 'select' statements at a higher level config SND_SOC_SOF_HDA_COMMON diff --git a/sound/soc/xilinx/Kconfig b/sound/soc/xilinx/Kconfig index 69973179ef15..1d3586b68db7 100644 --- a/sound/soc/xilinx/Kconfig +++ b/sound/soc/xilinx/Kconfig @@ -9,15 +9,15 @@ config SND_SOC_XILINX_I2S encapsulates PCM in AES format and sends AES data. config SND_SOC_XILINX_AUDIO_FORMATTER - tristate "Audio support for the the Xilinx audio formatter" - help - Select this option to enable Xilinx audio formatter - support. This provides DMA platform device support for - audio functionality. + tristate "Audio support for the the Xilinx audio formatter" + help + Select this option to enable Xilinx audio formatter + support. This provides DMA platform device support for + audio functionality. config SND_SOC_XILINX_SPDIF - tristate "Audio support for the the Xilinx SPDIF" - help - Select this option to enable Xilinx SPDIF Audio. - This provides playback and capture of SPDIF audio in - AES format. + tristate "Audio support for the the Xilinx SPDIF" + help + Select this option to enable Xilinx SPDIF Audio. + This provides playback and capture of SPDIF audio in + AES format. diff --git a/sound/soc/zte/Kconfig b/sound/soc/zte/Kconfig index a7842e4b791c..a23d4f13ca19 100644 --- a/sound/soc/zte/Kconfig +++ b/sound/soc/zte/Kconfig @@ -18,9 +18,9 @@ config ZX_I2S ZTE ZX I2S interface config ZX_TDM - tristate "ZTE ZX TDM Driver Support" - depends on COMMON_CLK - select SND_SOC_GENERIC_DMAENGINE_PCM - help - Say Y or M if you want to add support for codecs attached to the - ZTE ZX TDM interface + tristate "ZTE ZX TDM Driver Support" + depends on COMMON_CLK + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M if you want to add support for codecs attached to the + ZTE ZX TDM interface diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig index e2c53a0841da..059242f15d75 100644 --- a/sound/usb/Kconfig +++ b/sound/usb/Kconfig @@ -107,24 +107,24 @@ config SND_USB_US122L will be called snd-usb-us122l. config SND_USB_6FIRE - tristate "TerraTec DMX 6Fire USB" - select FW_LOADER - select BITREVERSE - select SND_RAWMIDI - select SND_PCM - select SND_VMASTER - help - Say Y here to include support for TerraTec 6fire DMX USB interface. - - You will need firmware files in order to be able to use the device - after it has been coldstarted. An install script for the firmware - and further help can be found at - http://sixfireusb.sourceforge.net + tristate "TerraTec DMX 6Fire USB" + select FW_LOADER + select BITREVERSE + select SND_RAWMIDI + select SND_PCM + select SND_VMASTER + help + Say Y here to include support for TerraTec 6fire DMX USB interface. + + You will need firmware files in order to be able to use the device + after it has been coldstarted. An install script for the firmware + and further help can be found at + http://sixfireusb.sourceforge.net config SND_USB_HIFACE - tristate "M2Tech hiFace USB-SPDIF driver" - select SND_PCM - help + tristate "M2Tech hiFace USB-SPDIF driver" + select SND_PCM + help Select this option to include support for M2Tech hiFace USB-SPDIF interface. -- 2.17.1

2 1

[alsa-devel] [GIT PULL] ASoC fixes for v5.4
by Mark Brown 23 Sep '19

23 Sep '19

The following changes since commit fca11622d600228bec405456f41590155b3a3eca: ASoC: sdm845: remove unneeded semicolon (2019-09-15 10:29:51 +0100) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v5.4-rc1 for you to fetch changes up to 147162f575152db80000fb3de26358264768ee9f: ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies (2019-09-20 12:06:48 +0100) ---------------------------------------------------------------- ASoC: Fixes for v5.4 A small smattering of ASoC fixes for v5.4 - nothing too exciting here, all small standalone things. ---------------------------------------------------------------- Arnd Bergmann (1): ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies Bard Liao (1): ASoC: core: delete component->card_list in soc_remove_component only Bard liao (1): ASoC: core: use list_del_init and move it back to soc_cleanup_component Gregory CLEMENT (1): ASoC: atmel_ssc_dai: Remove wrong spinlock usage Kuninori Morimoto (1): ASoC: rsnd: do error check after rsnd_channel_normalization() Mihai Serban (1): ASoC: fsl_sai: Fix noise when using EDMA Peter Ujfalusi (1): ASoC: pcm3168a: The codec does not support S32_LE sound/soc/atmel/atmel_ssc_dai.c | 12 ++---------- sound/soc/atmel/atmel_ssc_dai.h | 1 - sound/soc/codecs/pcm3168a.c | 3 +-- sound/soc/fsl/fsl_sai.c | 15 +++++++++++++++ sound/soc/fsl/fsl_sai.h | 1 + sound/soc/sh/rcar/ssi.c | 10 +++++----- sound/soc/soc-core.c | 2 +- sound/soc/ti/Kconfig | 11 +++++++++-- 8 files changed, 34 insertions(+), 21 deletions(-)

2 1