September 2019 - Alsa-devel - mailman.alsa-project.org

Re: [alsa-devel] [PATCH 2/2] ASoC: rt1011: ADCDAT pin config modification
by Shuming [范書銘] 02 Sep '19

02 Sep '19

> > > So really this is setting up a loopback for testing? > > > We would not like to change ADCDAT pin to input mode in normal case. > > That's why the driver enables ADCDAT pin to the output mode in default. > > The rt1011 supports the feedback signal which could be playback data or I/V > data, etc. > > If the system wants the AEC reference data, rt1011 could feedback the > playback data. > > > The product could connect 2/4/6/8 rt1011 chips on the same I2S bus. > > In a test or debug mode, we could toggle ADCDAT pin to input mode that > > also helps HW engineer check the slot of feedback signal for each rt1011. > > I think this needs more than just a straight userspace control on one device, > these use cases make sense but they'll need to be configured over multiple > chips simultaneously otherwise there's some possibility of hardware damage > (eg, if two chips try to drive the signal at the same time). If this really can be > usefully varied at runtime then the driver bit of this should probably be an API > that the machine driver can call, the machine driver can then expose a control > that sets all the chips involved up together. I understand your concerns and comments. In a design-in project, we will provide the proper control settings to arrange the slot location of ADCDAT signal for each rt1011. HW engineer will confirm the ADCDAT signal, too. So, the customer should not make two chips drive the signal at the same slot and at the same time. But, there is a chance to happen if the customer sets the wrong control settings. We will take your suggestion to make it as API call. The machine driver knows how many rt1011 chips connect and make pin config change together. Thanks. > ------Please consider the environment before printing this e-mail.

1 0

[alsa-devel] bug
by liebrecht＠grossmann-venter.com 02 Sep '19

02 Sep '19

Clearly a problem with Alsa. Alsa reports "Most likely this is a bug in the ALSA driver 'snd_usb_audio'." Alsa used to work great. howevere recently it takes 1/2-1hour for pulseaudio to convince alsa to make the 1818VSL available. Jack is not involved at all. Pulseaudio connects straight to alsa. Pulseaudio is my saving grace roight now as it perpetually tries to initialize and get alsa to present the audio interface, which it eventually after an hour does "waking up" Also sorts of decides to "wake up" and then suddenly the 1818vsl is found. How do I "wake up" alsa so that I can use soundcards. I cannot wait an hour after reboot or logout to get alsa to work again. See below What happens after starting pulseaudio is that it cycles the 1818 for about 1/2 hour to get a link to the 181vsl soundcard. That is the first paragraph (1) below which is perpetually cycled by pulseaudio. Eventually it succeeds which gives the BUG comment as below in paragraph (2) ------------------------------------------------------- 1) E: [pulseaudio] udev-util.c: Failed to get card object. E: [pulseaudio] module-alsa-card.c: Failed to find a working profile. E: [pulseaudio] module.c: Failed to load module "module-alsa-card" (argument: "device_id="3" name="usb-PreSonus_AudioBox_1818_VSL_2209-00" card_name="alsa_card.usb-PreSonus_Audio.Box_1818_VSL_2209-00" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1""): initialization failed. (**Note this message is cycled for an hour**) 2) (**Then miraculously....Alsa wakes up and pulseaudio can connect to 1818vsl **) E: [alsa-sink-USB Audio] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write. E: [alsa-sink-USB Audio] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_usb_audio'. Please report this issue to the ALSA developers. E: [alsa-sink-USB Audio] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. ------------------------------------------------------ Dont know what happened top Also to behave this way. Maybe someone has an idea ? upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.64 !!################################ !!Script ran on: Mon Sep 2 03:27:26 UTC 2019 !!Linux Distribution !!------------------ [1;36mWelcome to [1;33mMX Linux[1;36m! Powered by [1;33mDebian[1;36m.[0m PRETTY_NAME="Debian GNU/Linux 9 (stretch)" NAME="Debian GNU/Linux" ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" MX-18.3_x64 Continuum Dec 20, 2018 MX-18.3_x64 Continuum Dec 20, 2018 !!DMI Information !!--------------- Manufacturer: Supermicro Product Name: H8DGU Product Version: 1234567890 Firmware Version: 3.5c Board Vendor: Supermicro Board Name: H8DGU !!ACPI Device Status Information !!--------------- /sys/bus/acpi/devices/PNP0103:00/status 15 /sys/bus/acpi/devices/PNP0501:00/status 15 /sys/bus/acpi/devices/PNP0501:01/status 15 /sys/bus/acpi/devices/PNP0C0C:00/status 11 /sys/bus/acpi/devices/PNP0C0F:00/status 9 /sys/bus/acpi/devices/PNP0C0F:01/status 9 /sys/bus/acpi/devices/PNP0C0F:02/status 9 /sys/bus/acpi/devices/PNP0C0F:03/status 9 /sys/bus/acpi/devices/PNP0C0F:04/status 9 /sys/bus/acpi/devices/PNP0C0F:05/status 9 /sys/bus/acpi/devices/PNP0C0F:06/status 9 /sys/bus/acpi/devices/PNP0C0F:07/status 9 /sys/bus/acpi/devices/device:1e/status 15 /sys/bus/acpi/devices/device:1f/status 15 /sys/bus/acpi/devices/device:21/status 15 /sys/bus/acpi/devices/device:22/status 15 !!Kernel Information !!------------------ Kernel release: 4.19.0-5-amd64 Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k4.19.0-5-amd64 Library version: 1.1.9 Utilities version: 1.1.3 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_usb_audio snd_usb_audio !!Sound Servers on this system !!---------------------------- Pulseaudio: Installed - Yes (/usr/bin/pulseaudio) Running - Yes Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [HDMI ]: HDA-Intel - HDA ATI HDMI HDA ATI HDMI at 0xfebfc000 irq 46 1 [Interface ]: USB-Audio - USB Uno MIDI Interface M-Audio USB Uno MIDI Interface at usb-0000:00:12.2-1.2.3, full speed 2 [M1x1 ]: USB-Audio - MidiSport 1x1 M-Audio MidiSport 1x1 at usb-0000:00:12.2-1.2.2, full speed !!PCI Soundcards installed in the system !!-------------------------------------- 03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aae0 !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 03:00.1 0403: 1002:aae0 Subsystem: 1462:aae0 !!Modprobe options (Sound related) !!-------------------------------- snd_pcsp: index=-2 snd_usb_audio: index=-2 snd_atiixp_modem: index=-2 snd_intel8x0m: index=-2 snd_via82xx_modem: index=-2 !!Loaded sound module options !!--------------------------- !!Module: snd_hda_intel align_buffer_size : -1 bdl_pos_adj : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) pm_blacklist : Y position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 0 power_save_controller : N probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : -1 snoop : -1 !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) use_vmalloc : Y vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -2,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 quirk_alias : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) use_vmalloc : Y vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: ATI R6xx HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x1002aa01 Subsystem Id: 0x00aa0100 Revision Id: 0x100700 No Modem Function Group found Default PCM: rates [0x70]: 32000 44100 48000 bits [0x2]: 16 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=01, enabled=1 Connection: 1 0x02 Node 0x04 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x05 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=02, enabled=1 Connection: 1 0x04 Node 0x06 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x07 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=2, device=0 Control: name="IEC958 Playback Pro Mask", index=2, device=0 Control: name="IEC958 Playback Default", index=2, device=0 Control: name="IEC958 Playback Switch", index=2, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=03, enabled=1 Connection: 1 0x06 Node 0x08 [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x09 [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=3, device=0 Control: name="IEC958 Playback Pro Mask", index=3, device=0 Control: name="IEC958 Playback Default", index=3, device=0 Control: name="IEC958 Playback Switch", index=3, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=04, enabled=1 Connection: 1 0x08 Node 0x0a [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=1, channel=0 Digital: Enabled Digital category: 0x0 IEC Coding Type: 0x0 Node 0x0b [Pin Complex] wcaps 0x400381: Stereo Digital Control: name="IEC958 Playback Con Mask", index=4, device=0 Control: name="IEC958 Playback Pro Mask", index=4, device=0 Control: name="IEC958 Playback Default", index=4, device=0 Control: name="IEC958 Playback Switch", index=4, device=0 Pincap 0x00000094: OUT Detect HDMI Pin Default 0x185600f0: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=05, enabled=1 Connection: 1 0x0a Node 0x0c [Audio Output] wcaps 0x221: Stereo Digital Stripe Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 Node 0x0d [Pin Complex] wcaps 0x400381: Stereo Digital Pincap 0x00000094: OUT Detect HDMI Pin Default 0x585600f0: [N/A] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x0c --endcollapse-- !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x07630150, ctrlif=0, ctlerr=0 Card: M-Audio USB Uno MIDI Interface at usb-0000:00:12.2-1.2.3, full speed --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw---- 1 root audio 116, 8 Sep 1 04:44 /dev/snd/controlC0 crw-rw---- 1 root audio 116, 10 Sep 1 06:36 /dev/snd/controlC1 crw-rw---- 1 root audio 116, 12 Sep 1 06:36 /dev/snd/controlC2 crw-rw---- 1 root audio 116, 7 Sep 1 04:44 /dev/snd/hwC0D0 crw-rw---- 1 root audio 116, 9 Sep 1 06:36 /dev/snd/midiC1D0 crw-rw---- 1 root audio 116, 11 Sep 1 06:36 /dev/snd/midiC2D0 crw-rw---- 1 root audio 116, 6 Sep 1 23:17 /dev/snd/pcmC0D10p crw-rw---- 1 root audio 116, 2 Sep 1 23:17 /dev/snd/pcmC0D3p crw-rw---- 1 root audio 116, 3 Sep 1 23:17 /dev/snd/pcmC0D7p crw-rw---- 1 root audio 116, 4 Sep 1 23:17 /dev/snd/pcmC0D8p crw-rw---- 1 root audio 116, 5 Sep 1 23:17 /dev/snd/pcmC0D9p crw-rw---- 1 root audio 116, 1 Sep 1 05:13 /dev/snd/seq crw-rw---- 1 root audio 116, 33 Sep 1 04:44 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 80 Sep 1 22:40 . drwxr-xr-x 4 root root 340 Sep 1 22:40 .. lrwxrwxrwx 1 root root 12 Sep 1 06:36 usb-0763_1011-00 -> ../controlC2 lrwxrwxrwx 1 root root 12 Sep 1 06:36 usb-M-Audio_USB_Uno_MIDI_Interface-00 -> ../controlC1 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 100 Sep 1 22:40 . drwxr-xr-x 4 root root 340 Sep 1 22:40 .. lrwxrwxrwx 1 root root 12 Sep 1 06:36 pci-0000:00:12.2-usb-0:1.2.2:1.0 -> ../controlC2 lrwxrwxrwx 1 root root 12 Sep 1 06:36 pci-0000:00:12.2-usb-0:1.2.3:1.0 -> ../controlC1 lrwxrwxrwx 1 root root 12 Sep 1 04:44 pci-0000:03:00.1 -> ../controlC0 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) # v4.0 # Requires alsa-utils libasound2-plugin-equal # ***** Defaults ******************************************************* # Audio card/chip and device to use and control # In most cases these settings should remain commented (#) # When commented, card and device 0 are usually automatically selected # When uncommented, the item corresponding to the number is selected #defaults.pcm.card 0 #defaults.pcm.device 0 #defaults.ctl.card 0 # ***** Reset ********************************************************** # override the existing definition of the default device pcm.!default { type plug # point output to the equalizer device slave.pcm plugequal } # ***** Equalizer ****************************************************** # set up the control interface of the equalizer device ctl.equalizer { type equal } # set up the equalizer device pcm.plugequal { type equal # point output to device named preamp slave.pcm "plug:preamp" } # ***** Pre-Amp ******************************************************** # set up the preamp device pcm.preamp { type softvol # name of slider control to display in alsamixer interface control.name Pre-Amp # minimum dB when slider is at 0% min_dB -5.0 # maximum dB when slider is at 100% max_dB 40.0 # point output to device named duplex slave.pcm "duplex" } # ***** Playback and Capture ******************************************* # set up the playback/capture device pcm.duplex { type asym # point playback output to use dmix playback.pcm "dmix" # point capture input record to use dsnoop capture.pcm "dsnoop" } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA ATI HDMI], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA ATI HDMI], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA ATI HDMI], device 9: HDMI 3 [HDMI 3] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA ATI HDMI], device 10: HDMI 4 [HDMI 4] Subdevices: 1/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** !!Amixer output !!------------- !!-------Mixer controls for card 0 [HDMI] Card hw:0 'HDMI'/'HDA ATI HDMI at 0xfebfc000 irq 46' Mixer name : 'ATI R6xx HDMI' Components : 'HDA:1002aa01,00aa0100,00100700' Controls : 35 Simple ctrls : 5 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',3 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',4 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [Interface] Card hw:1 'Interface'/'M-Audio USB Uno MIDI Interface at usb-0000:00:12.2-1.2.3, full speed' Mixer name : 'USB Mixer' Components : 'USB0763:0150' Controls : 1 Simple ctrls : 0 !!-------Mixer controls for card 2 [M1x1] Card hw:2 'M1x1'/'M-Audio MidiSport 1x1 at usb-0000:00:12.2-1.2.2, full speed' Mixer name : '' Components : 'USB0763:1011' Controls : 0 Simple ctrls : 0 !!Alsactl output !!-------------- --startcollapse-- state.HDMI { control.1 { iface CARD name 'HDMI/DP,pcm=3 Jack' value false comment { access read type BOOLEAN count 1 } } control.2 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface PCM device 3 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.7 { iface CARD name 'HDMI/DP,pcm=7 Jack' value false comment { access read type BOOLEAN count 1 } } control.8 { iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.9 { iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.10 { iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.11 { iface MIXER name 'IEC958 Playback Switch' index 1 value true comment { access 'read write' type BOOLEAN count 1 } } control.12 { iface PCM device 7 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.13 { iface CARD name 'HDMI/DP,pcm=8 Jack' value false comment { access read type BOOLEAN count 1 } } control.14 { iface MIXER name 'IEC958 Playback Con Mask' index 2 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.15 { iface MIXER name 'IEC958 Playback Pro Mask' index 2 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.16 { iface MIXER name 'IEC958 Playback Default' index 2 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.17 { iface MIXER name 'IEC958 Playback Switch' index 2 value true comment { access 'read write' type BOOLEAN count 1 } } control.18 { iface PCM device 8 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.19 { iface CARD name 'HDMI/DP,pcm=9 Jack' value false comment { access read type BOOLEAN count 1 } } control.20 { iface MIXER name 'IEC958 Playback Con Mask' index 3 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.21 { iface MIXER name 'IEC958 Playback Pro Mask' index 3 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.22 { iface MIXER name 'IEC958 Playback Default' index 3 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.23 { iface MIXER name 'IEC958 Playback Switch' index 3 value true comment { access 'read write' type BOOLEAN count 1 } } control.24 { iface PCM device 9 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.25 { iface CARD name 'HDMI/DP,pcm=10 Jack' value false comment { access read type BOOLEAN count 1 } } control.26 { iface MIXER name 'IEC958 Playback Con Mask' index 4 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.27 { iface MIXER name 'IEC958 Playback Pro Mask' index 4 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.28 { iface MIXER name 'IEC958 Playback Default' index 4 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.29 { iface MIXER name 'IEC958 Playback Switch' index 4 value true comment { access 'read write' type BOOLEAN count 1 } } control.30 { iface PCM device 10 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.31 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.32 { iface PCM device 7 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.33 { iface PCM device 8 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.34 { iface PCM device 9 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.35 { iface PCM device 10 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } } state.Interface { control.1 { iface CARD name 'Keep Interface' value false comment { access 'read write' type BOOLEAN count 1 } } } state.M1x1 { control { } } --endcollapse-- !!All Loaded Modules !!------------------ Module snd_seq_dummy snd_seq_midi snd_seq_midi_event snd_seq bnep rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache cpufreq_userspace cpufreq_conservative cpufreq_powersave bluetooth pci_stub vboxpci drbg ansi_cprng vboxnetadp ecdh_generic rfkill vboxnetflt vboxdrv ftdi_sio usbserial binfmt_misc snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device joydev snd_hda_codec_hdmi snd_hda_intel snd_hda_codec amd64_edac_mod edac_mce_amd amdgpu snd_hda_core snd_hwdep snd_pcm_oss kvm_amd ccp mgag200 rng_core snd_mixer_oss kvm irqbypass chash snd_pcm gpu_sched ipmi_si crct10dif_pclmul evdev crc32_pclmul serio_raw ghash_clmulni_intel ipmi_devintf snd_timer ttm ipmi_msghandler drm_kms_helper k10temp sg snd fam15h_power sp5100_tco drm soundcore button nfsd auth_rpcgss nfs_acl lockd grace sunrpc loop vhba ecryptfs parport_pc ppdev lp parport ip_tables x_tables autofs4 sr_mod cdrom ext4 crc16 mbcache jbd2 fscrypto ecb uas usb_storage hid_generic usbhid hid btrfs xor zstd_decompress zstd_compress xxhash sd_mod raid6_pq libcrc32c crc32c_generic vmd crc32c_intel ohci_pci ata_generic aesni_intel aes_x86_64 ahci crypto_simd ehci_pci ohci_hcd pata_atiixp libahci cryptd glue_helper ehci_hcd psmouse libata igb usbcore i2c_piix4 i2c_algo_bit scsi_mod usb_common dca !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x03 0x185600f0 0x05 0x185600f0 0x07 0x185600f0 0x09 0x185600f0 0x0b 0x185600f0 0x0d 0x585600f0 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: !!ALSA/HDA dmesg !!--------------

1 0

[alsa-devel] [PATCH] drm: dw-hdmi-i2s: enable audio clock in audio_startup
by Cheng-Yi Chiang 02 Sep '19

02 Sep '19

In the designware databook, the sequence of enabling audio clock and setting format is not clearly specified. Currently, audio clock is enabled in the end of hw_param ops after setting format. On some monitors, there is a possibility that audio does not come out. Fix this by enabling audio clock in audio_startup ops before hw_param ops setting format. Signed-off-by: Cheng-Yi Chiang <cychiang(a)chromium.org> --- drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c index 5cbb71a866d5..08b4adbb1ddc 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c @@ -69,6 +69,14 @@ static int dw_hdmi_i2s_hw_params(struct device *dev, void *data, hdmi_write(audio, conf0, HDMI_AUD_CONF0); hdmi_write(audio, conf1, HDMI_AUD_CONF1); + return 0; +} + +static int dw_hdmi_i2s_audio_startup(struct device *dev, void *data) +{ + struct dw_hdmi_i2s_audio_data *audio = data; + struct dw_hdmi *hdmi = audio->hdmi; + dw_hdmi_audio_enable(hdmi); return 0; @@ -105,6 +113,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component, } static struct hdmi_codec_ops dw_hdmi_i2s_ops = { + .audio_startup = dw_hdmi_i2s_audio_startup, .hw_params = dw_hdmi_i2s_hw_params, .audio_shutdown = dw_hdmi_i2s_audio_shutdown, .get_dai_id = dw_hdmi_i2s_get_dai_id, -- 2.23.0.187.g17f5b7556c-goog

3 3

[alsa-devel] [PATCH] alsa-lib: Remove usleep usage
by Rosen Penev 02 Sep '19

02 Sep '19

usleep was deprecated by POSIX 2008 and is unavailable without deprecated APIs enabled in uClibc-ng. Signed-off-by: Rosen Penev <rosenp(a)gmail.com> --- src/pcm/pcm_shm.c | 3 ++- src/ucm/main.c | 3 ++- test/mixtest.c | 2 +- 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/src/pcm/pcm_shm.c b/src/pcm/pcm_shm.c index 26a27a57..30a77cd4 100644 --- a/src/pcm/pcm_shm.c +++ b/src/pcm/pcm_shm.c @@ -485,12 +485,13 @@ static int snd_pcm_shm_drain(snd_pcm_t *pcm) snd_pcm_shm_t *shm = pcm->private_data; volatile snd_pcm_shm_ctrl_t *ctrl = shm->ctrl; int err; + struct timespec req = { 0, 10 * 1000 * 1000 }; do { ctrl->cmd = SNDRV_PCM_IOCTL_DRAIN; err = snd_pcm_shm_action(pcm); if (err != -EAGAIN) break; - usleep(10000); + nanosleep(&req, NULL); } while (1); if (err < 0) return err; diff --git a/src/ucm/main.c b/src/ucm/main.c index 99b1cd08..0e5236cb 100644 --- a/src/ucm/main.c +++ b/src/ucm/main.c @@ -359,6 +359,7 @@ static int execute_sequence(snd_use_case_mgr_t *uc_mgr, { struct list_head *pos; struct sequence_element *s; + struct timespec sleep = { 0, s->data.sleep * 1000 }; char *cdev = NULL; snd_ctl_t *ctl = NULL; int err = 0; @@ -440,7 +441,7 @@ static int execute_sequence(snd_use_case_mgr_t *uc_mgr, } break; case SEQUENCE_ELEMENT_TYPE_SLEEP: - usleep(s->data.sleep); + nanosleep(&sleep, NULL); break; case SEQUENCE_ELEMENT_TYPE_EXEC: err = system(s->data.exec); diff --git a/test/mixtest.c b/test/mixtest.c index 57ca5d53..f0940344 100644 --- a/test/mixtest.c +++ b/test/mixtest.c @@ -77,7 +77,7 @@ static double detect_cpu_clock() rdtscll(tsc_begin); clock_gettime(CLOCK_MONOTONIC, &tm_begin); - usleep(1000000); + sleep(1); rdtscll(tsc_end); clock_gettime(CLOCK_MONOTONIC, &tm_end); -- 2.17.1

1 0