Alsa-devel September 2018

alsa-devel@alsa-project.org

98 participants
231 discussions

[alsa-devel] [PATCH] ASoC: nau8822: new codec driver
by David Lin 19 Oct '18

19 Oct '18

Add driver for NAU88C22. Signed-off-by: David Lin <CTLIN0(a)nuvoton.com> --- .../devicetree/bindings/sound/nau8822.txt | 16 + sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/nau8822.c | 1136 +++++++++++++++++ sound/soc/codecs/nau8822.h | 204 +++ 5 files changed, 1363 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/nau8822.txt create mode 100644 sound/soc/codecs/nau8822.c create mode 100644 sound/soc/codecs/nau8822.h diff --git a/Documentation/devicetree/bindings/sound/nau8822.txt b/Documentation/devicetree/bindings/sound/nau8822.txt new file mode 100644 index 000000000000..a471d162d4e5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/nau8822.txt @@ -0,0 +1,16 @@ +NAU8822 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "nuvoton,nau8822" + + - reg : the I2C address of the device. + +Example: + +codec: nau8822@1a { + compatible = "nuvoton,nau8822"; + reg = <0x1a>; +}; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index efb095dbcd71..57365dbc1581 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -109,6 +109,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_MT6351 if MTK_PMIC_WRAP select SND_SOC_NAU8540 if I2C select SND_SOC_NAU8810 if I2C + select SND_SOC_NAU8822 if I2C select SND_SOC_NAU8824 if I2C select SND_SOC_NAU8825 if I2C select SND_SOC_HDMI_CODEC @@ -1299,6 +1300,10 @@ config SND_SOC_NAU8810 tristate "Nuvoton Technology Corporation NAU88C10 CODEC" depends on I2C +config SND_SOC_NAU8822 + tristate "Nuvoton Technology Corporation NAU88C22 CODEC" + depends on I2C + config SND_SOC_NAU8824 tristate "Nuvoton Technology Corporation NAU88L24 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 7ae7c85e8219..181a7d222fd7 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -106,6 +106,7 @@ snd-soc-msm8916-digital-objs := msm8916-wcd-digital.o snd-soc-mt6351-objs := mt6351.o snd-soc-nau8540-objs := nau8540.o snd-soc-nau8810-objs := nau8810.o +snd-soc-nau8822-objs := nau8822.o snd-soc-nau8824-objs := nau8824.o snd-soc-nau8825-objs := nau8825.o snd-soc-hdmi-codec-objs := hdmi-codec.o @@ -366,6 +367,7 @@ obj-$(CONFIG_SND_SOC_MSM8916_WCD_DIGITAL) +=snd-soc-msm8916-digital.o obj-$(CONFIG_SND_SOC_MT6351) += snd-soc-mt6351.o obj-$(CONFIG_SND_SOC_NAU8540) += snd-soc-nau8540.o obj-$(CONFIG_SND_SOC_NAU8810) += snd-soc-nau8810.o +obj-$(CONFIG_SND_SOC_NAU8822) += snd-soc-nau8822.o obj-$(CONFIG_SND_SOC_NAU8824) += snd-soc-nau8824.o obj-$(CONFIG_SND_SOC_NAU8825) += snd-soc-nau8825.o obj-$(CONFIG_SND_SOC_HDMI_CODEC) += snd-soc-hdmi-codec.o diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c new file mode 100644 index 000000000000..622ce947f134 --- /dev/null +++ b/sound/soc/codecs/nau8822.c @@ -0,0 +1,1136 @@ +/* + * nau8822.c -- NAU8822 ALSA Soc Audio Codec driver + * + * Copyright 2017 Nuvoton Technology Corp. + * + * Author: David Lin <ctlin0(a)nuvoton.com> + * Co-author: John Hsu <kchsu0(a)nuvoton.com> + * Co-author: Seven Li <wtli(a)nuvoton.com> + * + * Based on WM8974.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <asm/div64.h> +#include "nau8822.h" + +#define NAU_PLL_FREQ_MAX 100000000 +#define NAU_PLL_FREQ_MIN 90000000 +#define NAU_PLL_REF_MAX 33000000 +#define NAU_PLL_REF_MIN 8000000 +#define NAU_PLL_OPTOP_MIN 6 + +static const int nau8822_mclk_scaler[] = { 10, 15, 20, 30, 40, 60, 80, 120 }; + +static const struct reg_default nau8822_reg_defaults[] = { + { NAU8822_REG_POWER_MANAGEMENT_1, 0x0000 }, + { NAU8822_REG_POWER_MANAGEMENT_2, 0x0000 }, + { NAU8822_REG_POWER_MANAGEMENT_3, 0x0000 }, + { NAU8822_REG_AUDIO_INTERFACE, 0x0050 }, + { NAU8822_REG_COMPANDING_CONTROL, 0x0000 }, + { NAU8822_REG_CLOCKING, 0x0140 }, + { NAU8822_REG_ADDITIONAL_CONTROL, 0x0000 }, + { NAU8822_REG_GPIO_CONTROL, 0x0000 }, + { NAU8822_REG_JACK_DETECT_CONTROL_1, 0x0000 }, + { NAU8822_REG_DAC_CONTROL, 0x0000 }, + { NAU8822_REG_LEFT_DAC_DIGITAL_VOLUME, 0x00ff }, + { NAU8822_REG_RIGHT_DAC_DIGITAL_VOLUME, 0x00ff }, + { NAU8822_REG_JACK_DETECT_CONTROL_2, 0x0000 }, + { NAU8822_REG_ADC_CONTROL, 0x0100 }, + { NAU8822_REG_LEFT_ADC_DIGITAL_VOLUME, 0x00ff }, + { NAU8822_REG_RIGHT_ADC_DIGITAL_VOLUME, 0x00ff }, + { NAU8822_REG_EQ1, 0x012c }, + { NAU8822_REG_EQ2, 0x002c }, + { NAU8822_REG_EQ3, 0x002c }, + { NAU8822_REG_EQ4, 0x002c }, + { NAU8822_REG_EQ5, 0x002c }, + { NAU8822_REG_DAC_LIMITER_1, 0x0032 }, + { NAU8822_REG_DAC_LIMITER_2, 0x0000 }, + { NAU8822_REG_NOTCH_FILTER_1, 0x0000 }, + { NAU8822_REG_NOTCH_FILTER_2, 0x0000 }, + { NAU8822_REG_NOTCH_FILTER_3, 0x0000 }, + { NAU8822_REG_NOTCH_FILTER_4, 0x0000 }, + { NAU8822_REG_ALC_CONTROL_1, 0x0038 }, + { NAU8822_REG_ALC_CONTROL_2, 0x000b }, + { NAU8822_REG_ALC_CONTROL_3, 0x0032 }, + { NAU8822_REG_NOISE_GATE, 0x0010 }, + { NAU8822_REG_PLL_N, 0x0008 }, + { NAU8822_REG_PLL_K1, 0x000c }, + { NAU8822_REG_PLL_K2, 0x0093 }, + { NAU8822_REG_PLL_K3, 0x00e9 }, + { NAU8822_REG_3D_CONTROL, 0x0000 }, + { NAU8822_REG_RIGHT_SPEAKER_CONTROL, 0x0000 }, + { NAU8822_REG_INPUT_CONTROL, 0x0033 }, + { NAU8822_REG_LEFT_INP_PGA_CONTROL, 0x0010 }, + { NAU8822_REG_RIGHT_INP_PGA_CONTROL, 0x0010 }, + { NAU8822_REG_LEFT_ADC_BOOST_CONTROL, 0x0100 }, + { NAU8822_REG_RIGHT_ADC_BOOST_CONTROL, 0x0100 }, + { NAU8822_REG_OUTPUT_CONTROL, 0x0002 }, + { NAU8822_REG_LEFT_MIXER_CONTROL, 0x0001 }, + { NAU8822_REG_RIGHT_MIXER_CONTROL, 0x0001 }, + { NAU8822_REG_LHP_VOLUME, 0x0039 }, + { NAU8822_REG_RHP_VOLUME, 0x0039 }, + { NAU8822_REG_LSPKOUT_VOLUME, 0x0039 }, + { NAU8822_REG_RSPKOUT_VOLUME, 0x0039 }, + { NAU8822_REG_AUX2_MIXER, 0x0001 }, + { NAU8822_REG_AUX1_MIXER, 0x0001 }, + { NAU8822_REG_POWER_MANAGEMENT_4, 0x0000 }, + { NAU8822_REG_LEFT_TIME_SLOT, 0x0000 }, + { NAU8822_REG_MISC, 0x0020 }, + { NAU8822_REG_RIGHT_TIME_SLOT, 0x0000 }, + { NAU8822_REG_DEVICE_REVISION, 0x007f }, + { NAU8822_REG_DEVICE_ID, 0x001a }, + { NAU8822_REG_DAC_DITHER, 0x0114 }, + { NAU8822_REG_ALC_ENHANCE_1, 0x0000 }, + { NAU8822_REG_ALC_ENHANCE_2, 0x0000 }, + { NAU8822_REG_192KHZ_SAMPLING, 0x0008 }, + { NAU8822_REG_MISC_CONTROL, 0x0000 }, + { NAU8822_REG_INPUT_TIEOFF, 0x0000 }, + { NAU8822_REG_POWER_REDUCTION, 0x0000 }, + { NAU8822_REG_AGC_PEAK2PEAK, 0x0000 }, + { NAU8822_REG_AGC_PEAK_DETECT, 0x0000 }, + { NAU8822_REG_AUTOMUTE_CONTROL, 0x0000 }, + { NAU8822_REG_OUTPUT_TIEOFF, 0x0000 }, +}; + +static bool nau8822_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8822_REG_RESET ... NAU8822_REG_JACK_DETECT_CONTROL_1: + case NAU8822_REG_DAC_CONTROL ... NAU8822_REG_LEFT_ADC_DIGITAL_VOLUME: + case NAU8822_REG_RIGHT_ADC_DIGITAL_VOLUME: + case NAU8822_REG_EQ1 ... NAU8822_REG_EQ5: + case NAU8822_REG_DAC_LIMITER_1 ... NAU8822_REG_DAC_LIMITER_2: + case NAU8822_REG_NOTCH_FILTER_1 ... NAU8822_REG_NOTCH_FILTER_4: + case NAU8822_REG_ALC_CONTROL_1 ...NAU8822_REG_PLL_K3: + case NAU8822_REG_3D_CONTROL: + case NAU8822_REG_RIGHT_SPEAKER_CONTROL: + case NAU8822_REG_INPUT_CONTROL ... NAU8822_REG_LEFT_ADC_BOOST_CONTROL: + case NAU8822_REG_RIGHT_ADC_BOOST_CONTROL ... NAU8822_REG_AUX1_MIXER: + case NAU8822_REG_POWER_MANAGEMENT_4 ... NAU8822_REG_DEVICE_ID: + case NAU8822_REG_DAC_DITHER: + case NAU8822_REG_ALC_ENHANCE_1 ... NAU8822_REG_MISC_CONTROL: + case NAU8822_REG_INPUT_TIEOFF ... NAU8822_REG_OUTPUT_TIEOFF: + return true; + default: + return false; + } +} + +static bool nau8822_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8822_REG_RESET ... NAU8822_REG_JACK_DETECT_CONTROL_1: + case NAU8822_REG_DAC_CONTROL ... NAU8822_REG_LEFT_ADC_DIGITAL_VOLUME: + case NAU8822_REG_RIGHT_ADC_DIGITAL_VOLUME: + case NAU8822_REG_EQ1 ... NAU8822_REG_EQ5: + case NAU8822_REG_DAC_LIMITER_1 ... NAU8822_REG_DAC_LIMITER_2: + case NAU8822_REG_NOTCH_FILTER_1 ... NAU8822_REG_NOTCH_FILTER_4: + case NAU8822_REG_ALC_CONTROL_1 ...NAU8822_REG_PLL_K3: + case NAU8822_REG_3D_CONTROL: + case NAU8822_REG_RIGHT_SPEAKER_CONTROL: + case NAU8822_REG_INPUT_CONTROL ... NAU8822_REG_LEFT_ADC_BOOST_CONTROL: + case NAU8822_REG_RIGHT_ADC_BOOST_CONTROL ... NAU8822_REG_AUX1_MIXER: + case NAU8822_REG_POWER_MANAGEMENT_4 ... NAU8822_REG_DEVICE_ID: + case NAU8822_REG_DAC_DITHER: + case NAU8822_REG_ALC_ENHANCE_1 ... NAU8822_REG_MISC_CONTROL: + case NAU8822_REG_INPUT_TIEOFF ... NAU8822_REG_OUTPUT_TIEOFF: + return true; + default: + return false; + } +} + +static bool nau8822_volatile(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8822_REG_RESET: + case NAU8822_REG_DEVICE_REVISION: + case NAU8822_REG_DEVICE_ID: + case NAU8822_REG_AGC_PEAK2PEAK: + case NAU8822_REG_AGC_PEAK_DETECT: + case NAU8822_REG_AUTOMUTE_CONTROL: + return true; + default: + return false; + } +} + +/* The EQ parameters get function is to get the 5 band equalizer control. + * The regmap raw read can't work here because regmap doesn't provide + * value format for value width of 9 bits. Therefore, the driver reads data + * from cache and makes value format according to the endianness of + * bytes type control element. + */ +static int nau8822_eq_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + int i, reg; + u16 reg_val, *val; + + val = (u16 *)ucontrol->value.bytes.data; + reg = NAU8822_REG_EQ1; + for (i = 0; i < params->max / sizeof(u16); i++) { + reg_val = snd_soc_component_read32(component, reg + i); + /* conversion of 16-bit integers between native CPU format + * and big endian format + */ + reg_val = cpu_to_be16(reg_val); + memcpy(val + i, &reg_val, sizeof(reg_val)); + } + + return 0; +} + +/* The EQ parameters put function is to make configuration of 5 band equalizer + * control. These configuration includes central frequency, equalizer gain, + * cut-off frequency, bandwidth control, and equalizer path. + * The regmap raw write can't work here because regmap doesn't provide + * register and value format for register with address 7 bits and value 9 bits. + * Therefore, the driver makes value format according to the endianness of + * bytes type control element and writes data to codec. + */ +static int nau8822_eq_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = + snd_soc_kcontrol_component(kcontrol); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + void *data; + u16 *val, value; + int i, reg, ret; + + data = kmemdup(ucontrol->value.bytes.data, + params->max, GFP_KERNEL | GFP_DMA); + if (!data) + return -ENOMEM; + + val = (u16 *)data; + reg = NAU8822_REG_EQ1; + for (i = 0; i < params->max / sizeof(u16); i++) { + /* conversion of 16-bit integers between native CPU format + * and big endian format + */ + value = be16_to_cpu(*(val + i)); + ret = snd_soc_component_write(component, reg + i, value); + if (ret) { + dev_err(component->dev, + "EQ configuration fail, register: %x ret: %d\n", + reg + i, ret); + kfree(data); + return ret; + } + } + kfree(data); + + return 0; +} + +static const char * const nau8822_companding[] = { + "Off", "NC", "u-law", "A-law"}; + +static const struct soc_enum nau8822_companding_adc_enum = + SOC_ENUM_SINGLE(NAU8822_REG_COMPANDING_CONTROL, NAU8822_ADCCM_SFT, + ARRAY_SIZE(nau8822_companding), nau8822_companding); + +static const struct soc_enum nau8822_companding_dac_enum = + SOC_ENUM_SINGLE(NAU8822_REG_COMPANDING_CONTROL, NAU8822_DACCM_SFT, + ARRAY_SIZE(nau8822_companding), nau8822_companding); + +static const char * const nau8822_eqmode[] = {"Capture", "Playback"}; + +static const struct soc_enum nau8822_eqmode_enum = + SOC_ENUM_SINGLE(NAU8822_REG_EQ1, NAU8822_EQM_SFT, + ARRAY_SIZE(nau8822_eqmode), nau8822_eqmode); + +static const char * const nau8822_alc1[] = {"Off", "Right", "Left", "Both"}; +static const char * const nau8822_alc3[] = {"Normal", "Limiter"}; + +static const struct soc_enum nau8822_alc_enable_enum = + SOC_ENUM_SINGLE(NAU8822_REG_ALC_CONTROL_1, NAU8822_ALCEN_SFT, + ARRAY_SIZE(nau8822_alc1), nau8822_alc1); + +static const struct soc_enum nau8822_alc_mode_enum = + SOC_ENUM_SINGLE(NAU8822_REG_ALC_CONTROL_3, NAU8822_ALCM_SFT, + ARRAY_SIZE(nau8822_alc3), nau8822_alc3); + +static const DECLARE_TLV_DB_SCALE(digital_tlv, -12750, 50, 1); +static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1200, 75, 0); +static const DECLARE_TLV_DB_SCALE(spk_tlv, -5700, 100, 0); +static const DECLARE_TLV_DB_SCALE(pga_boost_tlv, 0, 2000, 0); +static const DECLARE_TLV_DB_SCALE(boost_tlv, -1500, 300, 1); +static const DECLARE_TLV_DB_SCALE(limiter_tlv, 0, 100, 0); + +static const struct snd_kcontrol_new nau8822_snd_controls[] = { + SOC_ENUM("ADC Companding", nau8822_companding_adc_enum), + SOC_ENUM("DAC Companding", nau8822_companding_dac_enum), + + SOC_ENUM("EQ Function", nau8822_eqmode_enum), + SND_SOC_BYTES_EXT("EQ Parameters", 10, + nau8822_eq_get, nau8822_eq_put), + + SOC_DOUBLE("DAC Inversion Switch", + NAU8822_REG_DAC_CONTROL, 0, 1, 1, 0), + SOC_DOUBLE_R_TLV("PCM Volume", + NAU8822_REG_LEFT_DAC_DIGITAL_VOLUME, + NAU8822_REG_RIGHT_DAC_DIGITAL_VOLUME, 0, 255, 0, digital_tlv), + + SOC_SINGLE("High Pass Filter Switch", + NAU8822_REG_ADC_CONTROL, 8, 1, 0), + SOC_SINGLE("High Pass Cut Off", + NAU8822_REG_ADC_CONTROL, 4, 7, 0), + + SOC_DOUBLE("ADC Inversion Switch", + NAU8822_REG_ADC_CONTROL, 0, 1, 1, 0), + SOC_DOUBLE_R_TLV("ADC Volume", + NAU8822_REG_LEFT_ADC_DIGITAL_VOLUME, + NAU8822_REG_RIGHT_ADC_DIGITAL_VOLUME, 0, 255, 0, digital_tlv), + + SOC_SINGLE("DAC Limiter Switch", + NAU8822_REG_DAC_LIMITER_1, 8, 1, 0), + SOC_SINGLE("DAC Limiter Decay", + NAU8822_REG_DAC_LIMITER_1, 4, 15, 0), + SOC_SINGLE("DAC Limiter Attack", + NAU8822_REG_DAC_LIMITER_1, 0, 15, 0), + SOC_SINGLE("DAC Limiter Threshold", + NAU8822_REG_DAC_LIMITER_2, 4, 7, 0), + SOC_SINGLE_TLV("DAC Limiter Volume", + NAU8822_REG_DAC_LIMITER_2, 0, 12, 0, limiter_tlv), + + SOC_ENUM("ALC Mode", nau8822_alc_mode_enum), + SOC_ENUM("ALC Enable Switch", nau8822_alc_enable_enum), + SOC_SINGLE("ALC Min Gain", + NAU8822_REG_ALC_CONTROL_1, 0, 7, 0), + SOC_SINGLE("ALC Max Gain", + NAU8822_REG_ALC_CONTROL_1, 3, 7, 0), + SOC_SINGLE("ALC Hold", + NAU8822_REG_ALC_CONTROL_2, 4, 10, 0), + SOC_SINGLE("ALC Target", + NAU8822_REG_ALC_CONTROL_2, 0, 15, 0), + SOC_SINGLE("ALC Decay", + NAU8822_REG_ALC_CONTROL_3, 4, 10, 0), + SOC_SINGLE("ALC Attack", + NAU8822_REG_ALC_CONTROL_3, 0, 10, 0), + SOC_SINGLE("ALC Noise Gate Switch", + NAU8822_REG_NOISE_GATE, 3, 1, 0), + SOC_SINGLE("ALC Noise Gate Threshold", + NAU8822_REG_NOISE_GATE, 0, 7, 0), + + SOC_DOUBLE_R("PGA ZC Switch", + NAU8822_REG_LEFT_INP_PGA_CONTROL, + NAU8822_REG_RIGHT_INP_PGA_CONTROL, + 7, 1, 0), + SOC_DOUBLE_R_TLV("PGA Volume", + NAU8822_REG_LEFT_INP_PGA_CONTROL, + NAU8822_REG_RIGHT_INP_PGA_CONTROL, 0, 63, 0, inpga_tlv), + + SOC_DOUBLE_R("Headphone ZC Switch", + NAU8822_REG_LHP_VOLUME, + NAU8822_REG_RHP_VOLUME, 7, 1, 0), + SOC_DOUBLE_R("Headphone Playback Switch", + NAU8822_REG_LHP_VOLUME, + NAU8822_REG_RHP_VOLUME, 6, 1, 1), + SOC_DOUBLE_R_TLV("Headphone Volume", + NAU8822_REG_LHP_VOLUME, + NAU8822_REG_RHP_VOLUME, 0, 63, 0, spk_tlv), + + SOC_DOUBLE_R("Speaker ZC Switch", + NAU8822_REG_LSPKOUT_VOLUME, + NAU8822_REG_RSPKOUT_VOLUME, 7, 1, 0), + SOC_DOUBLE_R("Speaker Playback Switch", + NAU8822_REG_LSPKOUT_VOLUME, + NAU8822_REG_RSPKOUT_VOLUME, 6, 1, 1), + SOC_DOUBLE_R_TLV("Speaker Volume", + NAU8822_REG_LSPKOUT_VOLUME, + NAU8822_REG_RSPKOUT_VOLUME, 0, 63, 0, spk_tlv), + + SOC_DOUBLE_R("AUXOUT Playback Switch", + NAU8822_REG_AUX2_MIXER, + NAU8822_REG_AUX1_MIXER, 6, 1, 1), + + SOC_DOUBLE_R_TLV("PGA Boost Volume", + NAU8822_REG_LEFT_ADC_BOOST_CONTROL, + NAU8822_REG_RIGHT_ADC_BOOST_CONTROL, 8, 1, 0, pga_boost_tlv), + SOC_DOUBLE_R_TLV("L2/R2 Boost Volume", + NAU8822_REG_LEFT_ADC_BOOST_CONTROL, + NAU8822_REG_RIGHT_ADC_BOOST_CONTROL, 4, 7, 0, boost_tlv), + SOC_DOUBLE_R_TLV("Aux Boost Volume", + NAU8822_REG_LEFT_ADC_BOOST_CONTROL, + NAU8822_REG_RIGHT_ADC_BOOST_CONTROL, 0, 7, 0, boost_tlv), + + SOC_SINGLE("DAC 128x Oversampling Switch", + NAU8822_REG_DAC_CONTROL, 5, 1, 0), + SOC_SINGLE("ADC 128x Oversampling Switch", + NAU8822_REG_ADC_CONTROL, 5, 1, 0), +}; + +/* LMAIN and RMAIN Mixer */ +static const struct snd_kcontrol_new nau8822_left_out_mixer[] = { + SOC_DAPM_SINGLE("LINMIX Switch", + NAU8822_REG_LEFT_MIXER_CONTROL, 1, 1, 0), + SOC_DAPM_SINGLE("LAUX Switch", + NAU8822_REG_LEFT_MIXER_CONTROL, 5, 1, 0), + SOC_DAPM_SINGLE("LDAC Switch", + NAU8822_REG_LEFT_MIXER_CONTROL, 0, 1, 0), + SOC_DAPM_SINGLE("RDAC Switch", + NAU8822_REG_OUTPUT_CONTROL, 5, 1, 0), +}; + +static const struct snd_kcontrol_new nau8822_right_out_mixer[] = { + SOC_DAPM_SINGLE("RINMIX Switch", + NAU8822_REG_RIGHT_MIXER_CONTROL, 1, 1, 0), + SOC_DAPM_SINGLE("RAUX Switch", + NAU8822_REG_RIGHT_MIXER_CONTROL, 5, 1, 0), + SOC_DAPM_SINGLE("RDAC Switch", + NAU8822_REG_RIGHT_MIXER_CONTROL, 0, 1, 0), + SOC_DAPM_SINGLE("LDAC Switch", + NAU8822_REG_OUTPUT_CONTROL, 6, 1, 0), +}; + +/* AUX1 and AUX2 Mixer */ +static const struct snd_kcontrol_new nau8822_auxout1_mixer[] = { + SOC_DAPM_SINGLE("RDAC Switch", NAU8822_REG_AUX1_MIXER, 0, 1, 0), + SOC_DAPM_SINGLE("RMIX Switch", NAU8822_REG_AUX1_MIXER, 1, 1, 0), + SOC_DAPM_SINGLE("RINMIX Switch", NAU8822_REG_AUX1_MIXER, 2, 1, 0), + SOC_DAPM_SINGLE("LDAC Switch", NAU8822_REG_AUX1_MIXER, 3, 1, 0), + SOC_DAPM_SINGLE("LMIX Switch", NAU8822_REG_AUX1_MIXER, 4, 1, 0), +}; + +static const struct snd_kcontrol_new nau8822_auxout2_mixer[] = { + SOC_DAPM_SINGLE("LDAC Switch", NAU8822_REG_AUX2_MIXER, 0, 1, 0), + SOC_DAPM_SINGLE("LMIX Switch", NAU8822_REG_AUX2_MIXER, 1, 1, 0), + SOC_DAPM_SINGLE("LINMIX Switch", NAU8822_REG_AUX2_MIXER, 2, 1, 0), + SOC_DAPM_SINGLE("AUX1MIX Output Switch", + NAU8822_REG_AUX2_MIXER, 3, 1, 0), +}; + +/* Input PGA */ +static const struct snd_kcontrol_new nau8822_left_input_mixer[] = { + SOC_DAPM_SINGLE("L2 Switch", NAU8822_REG_INPUT_CONTROL, 2, 1, 0), + SOC_DAPM_SINGLE("MicN Switch", NAU8822_REG_INPUT_CONTROL, 1, 1, 0), + SOC_DAPM_SINGLE("MicP Switch", NAU8822_REG_INPUT_CONTROL, 0, 1, 0), +}; +static const struct snd_kcontrol_new nau8822_right_input_mixer[] = { + SOC_DAPM_SINGLE("R2 Switch", NAU8822_REG_INPUT_CONTROL, 6, 1, 0), + SOC_DAPM_SINGLE("MicN Switch", NAU8822_REG_INPUT_CONTROL, 5, 1, 0), + SOC_DAPM_SINGLE("MicP Switch", NAU8822_REG_INPUT_CONTROL, 4, 1, 0), +}; + +/* Loopback Switch */ +static const struct snd_kcontrol_new nau8822_loopback = + SOC_DAPM_SINGLE("Switch", NAU8822_REG_COMPANDING_CONTROL, + NAU8822_ADDAP_SFT, 1, 0); + +static int check_mclk_select_pll(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + struct snd_soc_component *component = + snd_soc_dapm_to_component(source->dapm); + unsigned int value; + + value = snd_soc_component_read32(component, NAU8822_REG_CLOCKING); + + return (value & NAU8822_CLKM_MASK); +} + +static const struct snd_soc_dapm_widget nau8822_dapm_widgets[] = { + SND_SOC_DAPM_DAC("Left DAC", "Left HiFi Playback", + NAU8822_REG_POWER_MANAGEMENT_3, 0, 0), + SND_SOC_DAPM_DAC("Right DAC", "Right HiFi Playback", + NAU8822_REG_POWER_MANAGEMENT_3, 1, 0), + SND_SOC_DAPM_ADC("Left ADC", "Left HiFi Capture", + NAU8822_REG_POWER_MANAGEMENT_2, 0, 0), + SND_SOC_DAPM_ADC("Right ADC", "Right HiFi Capture", + NAU8822_REG_POWER_MANAGEMENT_2, 1, 0), + + SOC_MIXER_ARRAY("Left Output Mixer", + NAU8822_REG_POWER_MANAGEMENT_3, 2, 0, nau8822_left_out_mixer), + SOC_MIXER_ARRAY("Right Output Mixer", + NAU8822_REG_POWER_MANAGEMENT_3, 3, 0, nau8822_right_out_mixer), + SOC_MIXER_ARRAY("AUX1 Output Mixer", + NAU8822_REG_POWER_MANAGEMENT_1, 7, 0, nau8822_auxout1_mixer), + SOC_MIXER_ARRAY("AUX2 Output Mixer", + NAU8822_REG_POWER_MANAGEMENT_1, 6, 0, nau8822_auxout2_mixer), + + SOC_MIXER_ARRAY("Left Input Mixer", + NAU8822_REG_POWER_MANAGEMENT_2, + 2, 0, nau8822_left_input_mixer), + SOC_MIXER_ARRAY("Right Input Mixer", + NAU8822_REG_POWER_MANAGEMENT_2, + 3, 0, nau8822_right_input_mixer), + + SND_SOC_DAPM_PGA("Left Boost Mixer", + NAU8822_REG_POWER_MANAGEMENT_2, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right Boost Mixer", + NAU8822_REG_POWER_MANAGEMENT_2, 5, 0, NULL, 0), + + SND_SOC_DAPM_PGA("Left Capture PGA", + NAU8822_REG_LEFT_INP_PGA_CONTROL, 6, 1, NULL, 0), + SND_SOC_DAPM_PGA("Right Capture PGA", + NAU8822_REG_RIGHT_INP_PGA_CONTROL, 6, 1, NULL, 0), + + SND_SOC_DAPM_PGA("Left Headphone Out", + NAU8822_REG_POWER_MANAGEMENT_2, 7, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right Headphone Out", + NAU8822_REG_POWER_MANAGEMENT_2, 8, 0, NULL, 0), + + SND_SOC_DAPM_PGA("Left Speaker Out", + NAU8822_REG_POWER_MANAGEMENT_3, 6, 0, NULL, 0), + SND_SOC_DAPM_PGA("Right Speaker Out", + NAU8822_REG_POWER_MANAGEMENT_3, 5, 0, NULL, 0), + + SND_SOC_DAPM_PGA("AUX1 Out", + NAU8822_REG_POWER_MANAGEMENT_3, 8, 0, NULL, 0), + SND_SOC_DAPM_PGA("AUX2 Out", + NAU8822_REG_POWER_MANAGEMENT_3, 7, 0, NULL, 0), + + SND_SOC_DAPM_SUPPLY("Mic Bias", + NAU8822_REG_POWER_MANAGEMENT_1, 4, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("PLL", + NAU8822_REG_POWER_MANAGEMENT_1, 5, 0, NULL, 0), + + SND_SOC_DAPM_SWITCH("Digital Loopback", SND_SOC_NOPM, 0, 0, + &nau8822_loopback), + + SND_SOC_DAPM_INPUT("LMICN"), + SND_SOC_DAPM_INPUT("LMICP"), + SND_SOC_DAPM_INPUT("RMICN"), + SND_SOC_DAPM_INPUT("RMICP"), + SND_SOC_DAPM_INPUT("LAUX"), + SND_SOC_DAPM_INPUT("RAUX"), + SND_SOC_DAPM_INPUT("L2"), + SND_SOC_DAPM_INPUT("R2"), + SND_SOC_DAPM_OUTPUT("LHP"), + SND_SOC_DAPM_OUTPUT("RHP"), + SND_SOC_DAPM_OUTPUT("LSPK"), + SND_SOC_DAPM_OUTPUT("RSPK"), + SND_SOC_DAPM_OUTPUT("AUXOUT1"), + SND_SOC_DAPM_OUTPUT("AUXOUT2"), +}; + +static const struct snd_soc_dapm_route nau8822_dapm_routes[] = { + {"Right DAC", NULL, "PLL", check_mclk_select_pll}, + {"Left DAC", NULL, "PLL", check_mclk_select_pll}, + + /* LMAIN and RMAIN Mixer */ + {"Right Output Mixer", "LDAC Switch", "Left DAC"}, + {"Right Output Mixer", "RDAC Switch", "Right DAC"}, + {"Right Output Mixer", "RAUX Switch", "RAUX"}, + {"Right Output Mixer", "RINMIX Switch", "Right Boost Mixer"}, + + {"Left Output Mixer", "LDAC Switch", "Left DAC"}, + {"Left Output Mixer", "RDAC Switch", "Right DAC"}, + {"Left Output Mixer", "LAUX Switch", "LAUX"}, + {"Left Output Mixer", "LINMIX Switch", "Left Boost Mixer"}, + + /* AUX1 and AUX2 Mixer */ + {"AUX1 Output Mixer", "RDAC Switch", "Right DAC"}, + {"AUX1 Output Mixer", "RMIX Switch", "Right Output Mixer"}, + {"AUX1 Output Mixer", "RINMIX Switch", "Right Boost Mixer"}, + {"AUX1 Output Mixer", "LDAC Switch", "Left DAC"}, + {"AUX1 Output Mixer", "LMIX Switch", "Left Output Mixer"}, + + {"AUX2 Output Mixer", "LDAC Switch", "Left DAC"}, + {"AUX2 Output Mixer", "LMIX Switch", "Left Output Mixer"}, + {"AUX2 Output Mixer", "LINMIX Switch", "Left Boost Mixer"}, + {"AUX2 Output Mixer", "AUX1MIX Output Switch", "AUX1 Output Mixer"}, + + /* Outputs */ + {"Right Headphone Out", NULL, "Right Output Mixer"}, + {"RHP", NULL, "Right Headphone Out"}, + + {"Left Headphone Out", NULL, "Left Output Mixer"}, + {"LHP", NULL, "Left Headphone Out"}, + + {"Right Speaker Out", NULL, "Right Output Mixer"}, + {"RSPK", NULL, "Right Speaker Out"}, + + {"Left Speaker Out", NULL, "Left Output Mixer"}, + {"LSPK", NULL, "Left Speaker Out"}, + + {"AUX1 Out", NULL, "AUX1 Output Mixer"}, + {"AUX2 Out", NULL, "AUX2 Output Mixer"}, + {"AUXOUT1", NULL, "AUX1 Out"}, + {"AUXOUT2", NULL, "AUX2 Out"}, + + /* Boost Mixer */ + {"Right ADC", NULL, "PLL", check_mclk_select_pll}, + {"Left ADC", NULL, "PLL", check_mclk_select_pll}, + + {"Right ADC", NULL, "Right Boost Mixer"}, + + {"Right Boost Mixer", NULL, "RAUX"}, + {"Right Boost Mixer", NULL, "Right Capture PGA"}, + {"Right Boost Mixer", NULL, "R2"}, + + {"Left ADC", NULL, "Left Boost Mixer"}, + + {"Left Boost Mixer", NULL, "LAUX"}, + {"Left Boost Mixer", NULL, "Left Capture PGA"}, + {"Left Boost Mixer", NULL, "L2"}, + + /* Input PGA */ + {"Right Capture PGA", NULL, "Right Input Mixer"}, + {"Left Capture PGA", NULL, "Left Input Mixer"}, + + /* Enable Microphone Power */ + {"Right Capture PGA", NULL, "Mic Bias"}, + {"Left Capture PGA", NULL, "Mic Bias"}, + + {"Right Input Mixer", "R2 Switch", "R2"}, + {"Right Input Mixer", "MicN Switch", "RMICN"}, + {"Right Input Mixer", "MicP Switch", "RMICP"}, + + {"Left Input Mixer", "L2 Switch", "L2"}, + {"Left Input Mixer", "MicN Switch", "LMICN"}, + {"Left Input Mixer", "MicP Switch", "LMICP"}, + + /* Digital Loopback */ + {"Digital Loopback", "Switch", "Left ADC"}, + {"Digital Loopback", "Switch", "Right ADC"}, + {"Left DAC", NULL, "Digital Loopback"}, + {"Right DAC", NULL, "Digital Loopback"}, +}; + +static int nau8822_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_component *component = dai->component; + struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); + + nau8822->div_id = clk_id; + nau8822->sysclk = freq; + dev_dbg(component->dev, "master sysclk %dHz, source %s\n", freq, + clk_id == NAU8822_CLK_PLL ? "PLL" : "MCLK"); + + return 0; +} + +static int nau8822_calc_pll(unsigned int pll_in, unsigned int fs, + struct nau8822_pll *pll_param) +{ + u64 f2, f2_max, pll_ratio; + int i, scal_sel; + + if (pll_in > NAU_PLL_REF_MAX || pll_in < NAU_PLL_REF_MIN) + return -EINVAL; + f2_max = 0; + scal_sel = ARRAY_SIZE(nau8822_mclk_scaler); + + for (i = 0; i < scal_sel; i++) { + f2 = 256 * fs * 4 * nau8822_mclk_scaler[i] / 10; + if (f2 > NAU_PLL_FREQ_MIN && f2 < NAU_PLL_FREQ_MAX && + f2_max < f2) { + f2_max = f2; + scal_sel = i; + } + } + + if (ARRAY_SIZE(nau8822_mclk_scaler) == scal_sel) + return -EINVAL; + pll_param->mclk_scaler = scal_sel; + f2 = f2_max; + + /* Calculate the PLL 4-bit integer input and the PLL 24-bit fractional + * input; round up the 24+4bit. + */ + pll_ratio = div_u64(f2 << 28, pll_in); + pll_param->pre_factor = 0; + if (((pll_ratio >> 28) & 0xF) < NAU_PLL_OPTOP_MIN) { + pll_ratio <<= 1; + pll_param->pre_factor = 1; + } + pll_param->pll_int = (pll_ratio >> 28) & 0xF; + pll_param->pll_frac = ((pll_ratio & 0xFFFFFFF) >> 4); + + return 0; +} + +static int nau8822_config_clkdiv(struct snd_soc_dai *dai, int div, int rate) +{ + struct snd_soc_component *component = dai->component; + struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); + struct nau8822_pll *pll = &nau8822->pll; + int i, sclk, imclk; + + switch (nau8822->div_id) { + case NAU8822_CLK_MCLK: + /* Configure the master clock prescaler div to make system + * clock to approximate the internal master clock (IMCLK); + * and large or equal to IMCLK. + */ + div = 0; + imclk = rate * 256; + for (i = 1; i < ARRAY_SIZE(nau8822_mclk_scaler); i++) { + sclk = (nau8822->sysclk * 10) / nau8822_mclk_scaler[i]; + if (sclk < imclk) + break; + div = i; + } + dev_dbg(component->dev, "master clock prescaler %x for fs %d\n", + div, rate); + + /* master clock from MCLK and disable PLL */ + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_MCLKSEL_MASK, + (div << NAU8822_MCLKSEL_SFT)); + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_CLKM_MASK, + NAU8822_CLKM_MCLK); + break; + + case NAU8822_CLK_PLL: + /* master clock from PLL and enable PLL */ + if (pll->mclk_scaler != div) { + dev_err(component->dev, + "master clock prescaler not meet PLL parameters\n"); + return -EINVAL; + } + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_MCLKSEL_MASK, + (div << NAU8822_MCLKSEL_SFT)); + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_CLKM_MASK, + NAU8822_CLKM_PLL); + break; + + default: + return -EINVAL; + } + + return 0; +} + +static int nau8822_set_pll(struct snd_soc_dai *dai, int pll_id, int source, + unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_component *component = dai->component; + struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); + struct nau8822_pll *pll_param = &nau8822->pll; + int ret, fs; + + fs = freq_out / 256; + + ret = nau8822_calc_pll(freq_in, fs, pll_param); + if (ret < 0) { + dev_err(component->dev, "Unsupported input clock %d\n", + freq_in); + return ret; + } + + dev_info(component->dev, + "pll_int=%x pll_frac=%x mclk_scaler=%x pre_factor=%x\n", + pll_param->pll_int, pll_param->pll_frac, + pll_param->mclk_scaler, pll_param->pre_factor); + + snd_soc_component_update_bits(component, + NAU8822_REG_PLL_N, NAU8822_PLLMCLK_DIV2 | NAU8822_PLLN_MASK, + (pll_param->pre_factor ? NAU8822_PLLMCLK_DIV2 : 0) | + pll_param->pll_int); + snd_soc_component_write(component, + NAU8822_REG_PLL_K1, (pll_param->pll_frac >> NAU8822_PLLK1_SFT) & + NAU8822_PLLK1_MASK); + snd_soc_component_write(component, + NAU8822_REG_PLL_K2, (pll_param->pll_frac >> NAU8822_PLLK2_SFT) & + NAU8822_PLLK2_MASK); + snd_soc_component_write(component, + NAU8822_REG_PLL_K3, pll_param->pll_frac & NAU8822_PLLK3_MASK); + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_MCLKSEL_MASK, + pll_param->mclk_scaler << NAU8822_MCLKSEL_SFT); + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_CLKM_MASK, NAU8822_CLKM_PLL); + + return 0; +} + +static int nau8822_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_component *component = dai->component; + u16 ctrl1_val = 0, ctrl2_val = 0; + + dev_dbg(component->dev, "%s\n", __func__); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ctrl2_val |= 1; + break; + case SND_SOC_DAIFMT_CBS_CFS: + ctrl2_val &= ~1; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ctrl1_val |= 0x10; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + ctrl1_val |= 0x8; + break; + case SND_SOC_DAIFMT_DSP_A: + ctrl1_val |= 0x18; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + ctrl1_val |= 0x180; + break; + case SND_SOC_DAIFMT_IB_NF: + ctrl1_val |= 0x100; + break; + case SND_SOC_DAIFMT_NB_IF: + ctrl1_val |= 0x80; + break; + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, + NAU8822_REG_AUDIO_INTERFACE, + NAU8822_AIFMT_MASK | NAU8822_LRP_MASK | NAU8822_BCLKP_MASK, + ctrl1_val); + snd_soc_component_update_bits(component, + NAU8822_REG_CLOCKING, NAU8822_CLKIOEN_MASK, ctrl2_val); + + return 0; +} + +static int nau8822_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); + int val_len = 0, val_rate = 0; + + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + break; + case SNDRV_PCM_FORMAT_S20_3LE: + val_len |= NAU8822_WLEN_20; + break; + case SNDRV_PCM_FORMAT_S24_LE: + val_len |= NAU8822_WLEN_24; + break; + case SNDRV_PCM_FORMAT_S32_LE: + val_len |= NAU8822_WLEN_32; + break; + default: + return -EINVAL; + } + + switch (params_rate(params)) { + case 8000: + val_rate |= NAU8822_SMPLR_8K; + break; + case 11025: + val_rate |= NAU8822_SMPLR_12K; + break; + case 16000: + val_rate |= NAU8822_SMPLR_16K; + break; + case 22050: + val_rate |= NAU8822_SMPLR_24K; + break; + case 32000: + val_rate |= NAU8822_SMPLR_32K; + break; + case 44100: + case 48000: + break; + default: + return -EINVAL; + } + + snd_soc_component_update_bits(component, + NAU8822_REG_AUDIO_INTERFACE, NAU8822_WLEN_MASK, val_len); + snd_soc_component_update_bits(component, + NAU8822_REG_ADDITIONAL_CONTROL, NAU8822_SMPLR_MASK, val_rate); + + /* If the master clock is from MCLK, provide the runtime FS for driver + * to get the master clock prescaler configuration. + */ + if (nau8822->div_id == NAU8822_CLK_MCLK) + nau8822_config_clkdiv(dai, 0, params_rate(params)); + + return 0; +} + +static int nau8822_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_component *component = dai->component; + + dev_dbg(component->dev, "%s: %d\n", __func__, mute); + + if (mute) + snd_soc_component_update_bits(component, + NAU8822_REG_DAC_CONTROL, 0x40, 0x40); + else + snd_soc_component_update_bits(component, + NAU8822_REG_DAC_CONTROL, 0x40, 0); + + return 0; +} + +static int nau8822_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + snd_soc_component_update_bits(component, + NAU8822_REG_POWER_MANAGEMENT_1, + NAU8822_REFIMP_MASK, NAU8822_REFIMP_80K); + break; + + case SND_SOC_BIAS_STANDBY: + snd_soc_component_update_bits(component, + NAU8822_REG_POWER_MANAGEMENT_1, + NAU8822_IOBUF_EN | NAU8822_ABIAS_EN, + NAU8822_IOBUF_EN | NAU8822_ABIAS_EN); + + if (snd_soc_component_get_bias_level(component) == + SND_SOC_BIAS_OFF) { + snd_soc_component_update_bits(component, + NAU8822_REG_POWER_MANAGEMENT_1, + NAU8822_REFIMP_MASK, NAU8822_REFIMP_3K); + mdelay(100); + } + snd_soc_component_update_bits(component, + NAU8822_REG_POWER_MANAGEMENT_1, + NAU8822_REFIMP_MASK, NAU8822_REFIMP_300K); + break; + + case SND_SOC_BIAS_OFF: + snd_soc_component_write(component, + NAU8822_REG_POWER_MANAGEMENT_1, 0); + snd_soc_component_write(component, + NAU8822_REG_POWER_MANAGEMENT_2, 0); + snd_soc_component_write(component, + NAU8822_REG_POWER_MANAGEMENT_3, 0); + break; + } + + dev_dbg(component->dev, "%s: %d\n", __func__, level); + + return 0; +} + +#define NAU8822_RATES (SNDRV_PCM_RATE_8000_48000) + +#define NAU8822_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +static const struct snd_soc_dai_ops nau8822_dai_ops = { + .hw_params = nau8822_hw_params, + .digital_mute = nau8822_mute, + .set_fmt = nau8822_set_dai_fmt, + .set_sysclk = nau8822_set_dai_sysclk, + .set_pll = nau8822_set_pll, +}; + +static struct snd_soc_dai_driver nau8822_dai = { + .name = "nau8822-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = NAU8822_RATES, + .formats = NAU8822_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = NAU8822_RATES, + .formats = NAU8822_FORMATS, + }, + .ops = &nau8822_dai_ops, + .symmetric_rates = 1, +}; + +static int nau8822_suspend(struct snd_soc_component *component) +{ + struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); + + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF); + + regcache_mark_dirty(nau8822->regmap); + + return 0; +} + +static int nau8822_resume(struct snd_soc_component *component) +{ + struct nau8822 *nau8822 = snd_soc_component_get_drvdata(component); + + regcache_sync(nau8822->regmap); + + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_STANDBY); + + return 0; +} + +/* + * These registers contain an "update" bit - bit 8. This means, for example, + * that one can write new DAC digital volume for both channels, but only when + * the update bit is set, will also the volume be updated - simultaneously for + * both channels. + */ +static const int update_reg[] = { + NAU8822_REG_LEFT_DAC_DIGITAL_VOLUME, + NAU8822_REG_RIGHT_DAC_DIGITAL_VOLUME, + NAU8822_REG_LEFT_ADC_DIGITAL_VOLUME, + NAU8822_REG_RIGHT_ADC_DIGITAL_VOLUME, + NAU8822_REG_LEFT_INP_PGA_CONTROL, + NAU8822_REG_RIGHT_INP_PGA_CONTROL, + NAU8822_REG_LHP_VOLUME, + NAU8822_REG_RHP_VOLUME, + NAU8822_REG_LSPKOUT_VOLUME, + NAU8822_REG_RSPKOUT_VOLUME, +}; + +static int nau8822_probe(struct snd_soc_component *component) +{ + int i; + + /* + * Set the update bit in all registers, that have one. This way all + * writes to those registers will also cause the update bit to be + * written. + */ + for (i = 0; i < ARRAY_SIZE(update_reg); i++) + snd_soc_component_update_bits(component, + update_reg[i], 0x100, 0x100); + + return 0; +} + +static const struct snd_soc_component_driver soc_component_dev_nau8822 = { + .probe = nau8822_probe, + .suspend = nau8822_suspend, + .resume = nau8822_resume, + .set_bias_level = nau8822_set_bias_level, + .controls = nau8822_snd_controls, + .num_controls = ARRAY_SIZE(nau8822_snd_controls), + .dapm_widgets = nau8822_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(nau8822_dapm_widgets), + .dapm_routes = nau8822_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(nau8822_dapm_routes), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static const struct regmap_config nau8822_regmap_config = { + .reg_bits = 7, + .val_bits = 9, + + .max_register = NAU8822_REG_MAX_REGISTER, + .volatile_reg = nau8822_volatile, + + .readable_reg = nau8822_readable_reg, + .writeable_reg = nau8822_writeable_reg, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = nau8822_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(nau8822_reg_defaults), +}; + +static int nau8822_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct nau8822 *nau8822 = dev_get_platdata(dev); + int ret; + + if (!nau8822) { + nau8822 = devm_kzalloc(dev, sizeof(*nau8822), GFP_KERNEL); + if (nau8822 == NULL) + return -ENOMEM; + } + i2c_set_clientdata(i2c, nau8822); + + nau8822->regmap = devm_regmap_init_i2c(i2c, &nau8822_regmap_config); + if (IS_ERR(nau8822->regmap)) { + ret = PTR_ERR(nau8822->regmap); + dev_err(&i2c->dev, "Failed to allocate regmap: %d\n", ret); + return ret; + } + nau8822->dev = dev; + + /* Reset the codec */ + ret = regmap_write(nau8822->regmap, NAU8822_REG_RESET, 0x00); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret); + return ret; + } + + ret = devm_snd_soc_register_component(dev, &soc_component_dev_nau8822, + &nau8822_dai, 1); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); + return ret; + } + + return 0; +} + +static const struct i2c_device_id nau8822_i2c_id[] = { + { "nau8822", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, nau8822_i2c_id); + +#ifdef CONFIG_OF +static const struct of_device_id nau8822_of_match[] = { + { .compatible = "nuvoton,nau8822", }, + { } +}; +MODULE_DEVICE_TABLE(of, nau8822_of_match); +#endif + +static struct i2c_driver nau8822_i2c_driver = { + .driver = { + .name = "nau8822", + .of_match_table = of_match_ptr(nau8822_of_match), + }, + .probe = nau8822_i2c_probe, + .id_table = nau8822_i2c_id, +}; +module_i2c_driver(nau8822_i2c_driver); + +MODULE_DESCRIPTION("ASoC NAU8822 codec driver"); +MODULE_AUTHOR("David Lin <ctlin0(a)nuvoton.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/sound/soc/codecs/nau8822.h b/sound/soc/codecs/nau8822.h new file mode 100644 index 000000000000..aa79c969cd44 --- /dev/null +++ b/sound/soc/codecs/nau8822.h @@ -0,0 +1,204 @@ +/* + * nau8822.h -- NAU8822 Soc Audio Codec driver + * + * Author: David Lin <ctlin0(a)nuvoton.com> + * Co-author: John Hsu <kchsu0(a)nuvoton.com> + * Co-author: Seven Li <wtli(a)nuvoton.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __NAU8822_H__ +#define __NAU8822_H__ + +#define NAU8822_REG_RESET 0x00 +#define NAU8822_REG_POWER_MANAGEMENT_1 0x01 +#define NAU8822_REG_POWER_MANAGEMENT_2 0x02 +#define NAU8822_REG_POWER_MANAGEMENT_3 0x03 +#define NAU8822_REG_AUDIO_INTERFACE 0x04 +#define NAU8822_REG_COMPANDING_CONTROL 0x05 +#define NAU8822_REG_CLOCKING 0x06 +#define NAU8822_REG_ADDITIONAL_CONTROL 0x07 +#define NAU8822_REG_GPIO_CONTROL 0x08 +#define NAU8822_REG_JACK_DETECT_CONTROL_1 0x09 +#define NAU8822_REG_DAC_CONTROL 0x0A +#define NAU8822_REG_LEFT_DAC_DIGITAL_VOLUME 0x0B +#define NAU8822_REG_RIGHT_DAC_DIGITAL_VOLUME 0x0C +#define NAU8822_REG_JACK_DETECT_CONTROL_2 0x0D +#define NAU8822_REG_ADC_CONTROL 0x0E +#define NAU8822_REG_LEFT_ADC_DIGITAL_VOLUME 0x0F +#define NAU8822_REG_RIGHT_ADC_DIGITAL_VOLUME 0x10 +#define NAU8822_REG_EQ1 0x12 +#define NAU8822_REG_EQ2 0x13 +#define NAU8822_REG_EQ3 0x14 +#define NAU8822_REG_EQ4 0x15 +#define NAU8822_REG_EQ5 0x16 +#define NAU8822_REG_DAC_LIMITER_1 0x18 +#define NAU8822_REG_DAC_LIMITER_2 0x19 +#define NAU8822_REG_NOTCH_FILTER_1 0x1B +#define NAU8822_REG_NOTCH_FILTER_2 0x1C +#define NAU8822_REG_NOTCH_FILTER_3 0x1D +#define NAU8822_REG_NOTCH_FILTER_4 0x1E +#define NAU8822_REG_ALC_CONTROL_1 0x20 +#define NAU8822_REG_ALC_CONTROL_2 0x21 +#define NAU8822_REG_ALC_CONTROL_3 0x22 +#define NAU8822_REG_NOISE_GATE 0x23 +#define NAU8822_REG_PLL_N 0x24 +#define NAU8822_REG_PLL_K1 0x25 +#define NAU8822_REG_PLL_K2 0x26 +#define NAU8822_REG_PLL_K3 0x27 +#define NAU8822_REG_3D_CONTROL 0x29 +#define NAU8822_REG_RIGHT_SPEAKER_CONTROL 0x2B +#define NAU8822_REG_INPUT_CONTROL 0x2C +#define NAU8822_REG_LEFT_INP_PGA_CONTROL 0x2D +#define NAU8822_REG_RIGHT_INP_PGA_CONTROL 0x2E +#define NAU8822_REG_LEFT_ADC_BOOST_CONTROL 0x2F +#define NAU8822_REG_RIGHT_ADC_BOOST_CONTROL 0x30 +#define NAU8822_REG_OUTPUT_CONTROL 0x31 +#define NAU8822_REG_LEFT_MIXER_CONTROL 0x32 +#define NAU8822_REG_RIGHT_MIXER_CONTROL 0x33 +#define NAU8822_REG_LHP_VOLUME 0x34 +#define NAU8822_REG_RHP_VOLUME 0x35 +#define NAU8822_REG_LSPKOUT_VOLUME 0x36 +#define NAU8822_REG_RSPKOUT_VOLUME 0x37 +#define NAU8822_REG_AUX2_MIXER 0x38 +#define NAU8822_REG_AUX1_MIXER 0x39 +#define NAU8822_REG_POWER_MANAGEMENT_4 0x3A +#define NAU8822_REG_LEFT_TIME_SLOT 0x3B +#define NAU8822_REG_MISC 0x3C +#define NAU8822_REG_RIGHT_TIME_SLOT 0x3D +#define NAU8822_REG_DEVICE_REVISION 0x3E +#define NAU8822_REG_DEVICE_ID 0x3F +#define NAU8822_REG_DAC_DITHER 0x41 +#define NAU8822_REG_ALC_ENHANCE_1 0x46 +#define NAU8822_REG_ALC_ENHANCE_2 0x47 +#define NAU8822_REG_192KHZ_SAMPLING 0x48 +#define NAU8822_REG_MISC_CONTROL 0x49 +#define NAU8822_REG_INPUT_TIEOFF 0x4A +#define NAU8822_REG_POWER_REDUCTION 0x4B +#define NAU8822_REG_AGC_PEAK2PEAK 0x4C +#define NAU8822_REG_AGC_PEAK_DETECT 0x4D +#define NAU8822_REG_AUTOMUTE_CONTROL 0x4E +#define NAU8822_REG_OUTPUT_TIEOFF 0x4F +#define NAU8822_REG_MAX_REGISTER NAU8822_REG_OUTPUT_TIEOFF + +/* NAU8822_REG_POWER_MANAGEMENT_1 (0x1) */ +#define NAU8822_REFIMP_MASK 0x3 +#define NAU8822_REFIMP_80K 0x1 +#define NAU8822_REFIMP_300K 0x2 +#define NAU8822_REFIMP_3K 0x3 +#define NAU8822_IOBUF_EN (0x1 << 2) +#define NAU8822_ABIAS_EN (0x1 << 3) + +/* NAU8822_REG_AUDIO_INTERFACE (0x4) */ +#define NAU8822_AIFMT_MASK (0x3 << 3) +#define NAU8822_WLEN_MASK (0x3 << 5) +#define NAU8822_WLEN_20 (0x1 << 5) +#define NAU8822_WLEN_24 (0x2 << 5) +#define NAU8822_WLEN_32 (0x3 << 5) +#define NAU8822_LRP_MASK (0x1 << 7) +#define NAU8822_BCLKP_MASK (0x1 << 8) + +/* NAU8822_REG_COMPANDING_CONTROL (0x5) */ +#define NAU8822_ADDAP_SFT 0 +#define NAU8822_ADCCM_SFT 1 +#define NAU8822_DACCM_SFT 3 + +/* NAU8822_REG_CLOCKING (0x6) */ +#define NAU8822_CLKIOEN_MASK 0x1 +#define NAU8822_MCLKSEL_SFT 5 +#define NAU8822_MCLKSEL_MASK (0x7 << 5) +#define NAU8822_BCLKSEL_SFT 2 +#define NAU8822_BCLKSEL_MASK (0x7 << 2) +#define NAU8822_CLKM_MASK (0x1 << 8) +#define NAU8822_CLKM_MCLK (0x0 << 8) +#define NAU8822_CLKM_PLL (0x1 << 8) + +/* NAU8822_REG_ADDITIONAL_CONTROL (0x08) */ +#define NAU8822_SMPLR_SFT 1 +#define NAU8822_SMPLR_MASK (0x7 << 1) +#define NAU8822_SMPLR_48K (0x0 << 1) +#define NAU8822_SMPLR_32K (0x1 << 1) +#define NAU8822_SMPLR_24K (0x2 << 1) +#define NAU8822_SMPLR_16K (0x3 << 1) +#define NAU8822_SMPLR_12K (0x4 << 1) +#define NAU8822_SMPLR_8K (0x5 << 1) + +/* NAU8822_REG_EQ1 (0x12) */ +#define NAU8822_EQ1GC_SFT 0 +#define NAU8822_EQ1CF_SFT 5 +#define NAU8822_EQM_SFT 8 + +/* NAU8822_REG_EQ2 (0x13) */ +#define NAU8822_EQ2GC_SFT 0 +#define NAU8822_EQ2CF_SFT 5 +#define NAU8822_EQ2BW_SFT 8 + +/* NAU8822_REG_EQ3 (0x14) */ +#define NAU8822_EQ3GC_SFT 0 +#define NAU8822_EQ3CF_SFT 5 +#define NAU8822_EQ3BW_SFT 8 + +/* NAU8822_REG_EQ4 (0x15) */ +#define NAU8822_EQ4GC_SFT 0 +#define NAU8822_EQ4CF_SFT 5 +#define NAU8822_EQ4BW_SFT 8 + +/* NAU8822_REG_EQ5 (0x16) */ +#define NAU8822_EQ5GC_SFT 0 +#define NAU8822_EQ5CF_SFT 5 + +/* NAU8822_REG_ALC_CONTROL_1 (0x20) */ +#define NAU8822_ALCMINGAIN_SFT 0 +#define NAU8822_ALCMXGAIN_SFT 3 +#define NAU8822_ALCEN_SFT 7 + +/* NAU8822_REG_ALC_CONTROL_2 (0x21) */ +#define NAU8822_ALCSL_SFT 0 +#define NAU8822_ALCHT_SFT 4 + +/* NAU8822_REG_ALC_CONTROL_3 (0x22) */ +#define NAU8822_ALCATK_SFT 0 +#define NAU8822_ALCDCY_SFT 4 +#define NAU8822_ALCM_SFT 8 + +/* NAU8822_REG_PLL_N (0x24) */ +#define NAU8822_PLLMCLK_DIV2 (0x1 << 4) +#define NAU8822_PLLN_MASK 0xF + +#define NAU8822_PLLK1_SFT 18 +#define NAU8822_PLLK1_MASK 0x3F + +/* NAU8822_REG_PLL_K2 (0x26) */ +#define NAU8822_PLLK2_SFT 9 +#define NAU8822_PLLK2_MASK 0x1FF + +/* NAU8822_REG_PLL_K3 (0x27) */ +#define NAU8822_PLLK3_MASK 0x1FF + +/* System Clock Source */ +enum { + NAU8822_CLK_MCLK, + NAU8822_CLK_PLL, +}; + +struct nau8822_pll { + int pre_factor; + int mclk_scaler; + int pll_frac; + int pll_int; +}; + +/* Codec Private Data */ +struct nau8822 { + struct device *dev; + struct regmap *regmap; + int mclk_idx; + struct nau8822_pll pll; + int sysclk; + int div_id; +}; + +#endif /* __NAU8822_H__ */ -- 2.18.0

3 5

Re: [alsa-devel] [PATCH 1/3] MIPS: jz4780: Allow access to jz4740-i2s
by Paul Burton 17 Oct '18

17 Oct '18

Hi Matthieu, On Wed, Jun 06, 2018 at 09:38:08PM +0200, Mathieu Malaterre wrote: > diff --git a/sound/soc/jz4740/Kconfig b/sound/soc/jz4740/Kconfig > index 1a354a6b6e87..35d82d96e781 100644 > --- a/sound/soc/jz4740/Kconfig > +++ b/sound/soc/jz4740/Kconfig > @@ -1,20 +1,20 @@ > config SND_JZ4740_SOC > - tristate "SoC Audio for Ingenic JZ4740 SoC" > - depends on MACH_JZ4740 || COMPILE_TEST > + tristate "SoC Audio for Ingenic JZ4740/JZ4780 SoC" > + depends on MACH_JZ4740 || MACH_JZ4780 || COMPILE_TEST Perhaps this could be MACH_INGENIC, or even just MIPS? Thanks, Paul

2 4

[alsa-devel] [ANNOUNCE] 2018 Linux Audio miniconference
by Mark Brown 16 Oct '18

16 Oct '18

Hi, As in previous years we're trying to organize an audio miniconference so we can get together and talk through issues, especially design decisons, face to face. This year's event will be held on Sunday October 21st in Edinburgh, the day before ELC Europe starts there. We're still finalizing the venue (we expect to be able to confirm next week) but it'll be outside the ELC venue so there will be no need to purchase an ELC ticket to attend. As with previous years let's pull together an agenda through a mailing list discussion - if people could reply to this mail with any topics they'd like to discuss we can take it from there. Of course if we can sort things out more quickly via the mailing list that's even better! If you're planning to attend please fill out the form here: https://docs.google.com/spreadsheets/d/11p2pSNxS7sJysg1JwErWi0T2Dq7XKRtAGng… Thanks, Mark

6 10

[alsa-devel] Fixing EAPD for STAC9202 on an embedded platform.
by Andy Davison 10 Oct '18

10 Oct '18

Hi everyone, I’m hoping that somebody here might be able to spot where I’m going wrong; I'm working with a picture-frame-like device manufactured by the late OpenPeak Inc. known as the OpenFrame (or O2 Joggler in the UK). It has an internal speaker and a 3.5mm line out socket; none of the other connections to its STAC9202 codec chip are exposed to the end user. I've been porting Ubuntu Bionic to the device and everything is done, except for the audio driver. Back in kernel 3.18 it was possible to use the following kernel patch and userland ALSA patch to have these two outputs work correctly, with the insertion of a plug into the line out properly muting the internal speaker. https://github.com/andydvsn/OpenFrame-Kernel/blob/master/patches/03-stac920… https://github.com/andydvsn/OpenFrame-Ubuntu/blob/master/overlay-trusty/lib… In kernel 4.14 the same trick no longer works, so I've rewritten the patch to more properly add support for this variant of STAC9202 to ALSA. It now looks like this: https://gist.github.com/andydvsn/7bffa8de0ed691b14508485d75501ffc This seems to line up the pin configurations appropriately, but when a plug is inserted to the line out, although the audio to the internal speaker is muted, the speaker emits a crackling sound whenever the device is processing. It seems that it is not being properly powered down and is amplifying general circuit noise. Disconnecting the plug returns sound to the internal speaker and the crackling ceases. This is reliable across multiple devices. Here is the alsa-info output from both the crackling kernel 4.14 and the working-just-fine kernel 3.18. https://gist.github.com/andydvsn/ccf55e6f7961dd405fc39d41a6ce9ef6 I don't have sufficient knowledge of ALSA drivers and patches and have been working purely from the configurations used by others over the years, so I would really appreciate somebody looking at the alsa-info output and the new patch to determine where I should go from here. I believe this is all to do with EAPD control, but what options I have for controlling that aren't known to me right now. Ideally, I want to end up with the audio muting and switching correctly when the jack is inserted. A bonus would be to lose the unused (or at least inaccessible) audio input and output options in alsamixer and gain individual control of the internal speaker and line out levels (which appear to be paired together at the moment). All the best, A. -- Andrew Davison

2 11

[alsa-devel] [PATCH 00/11] Add ZxR support + bugfixes
by Connor McAdams 08 Oct '18

08 Oct '18

This patch series adds support for the Sound Blaster ZxR, as well as a few bug fixes. This should be the last ca0132 based Creative card that needed support to be added. Also, I did check to make sure each patch compiles properly this time, but you can check yourself just to be sure. :) Connor McAdams (11): ALSA: hda/ca0132 - Fix AE-5 control type ALSA: hda/ca0132 - Fix surround sound with output effects ALSA: hda/ca0132 - Add ZxR quirks + new quirk check function ALSA: hda/ca0132 - Add ZxR pincfg ALSA: hda/ca0132 - Add DBpro hda_codec_ops ALSA: hda/ca0132 - Add ZxR init commands ALSA: hda/ca0132 - Add ZxR DSP post-download commands ALSA: hda/ca0132 - Add ZxR input/output select commands ALSA: hda/ca0132 - Remove input select enum for ZxR ALSA: hda/ca0132 - Add ZxR 600 ohm gain control ALSA: hda/ca0132 - Add ZxR exit commands sound/pci/hda/patch_ca0132.c | 369 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 345 insertions(+), 24 deletions(-) -- 2.7.4

3 17

Re: [alsa-devel] Microphone detected, but no output for all ASUS G751xx with ALC668 chipset
by Connor McAdams 08 Oct '18

08 Oct '18

I might not get around to writing the fix myself, but, here's the COEF's from within Windows. I've marked the ones missing inside the main init function. So, if anyone else wants to add these in, feel free. On Wed, Sep 12, 2018 at 1:16 PM, Håvard <hovardslill(a)gmail.com> wrote: > That was without running the program (sorry) > > This is output when running program: > > Before there was no "Current verb...." > They came when I opened up windows microphone settings. (something I didn't > do before) > > -Håvard > > Den ons. 12. sep. 2018 kl. 19:11 skrev Håvard <hovardslill(a)gmail.com>: >> >> I think this is right! >> >> I first booted up, then tested speakers (That I could not hear) and then >> tested microphone (Which worked perfectly) in windows settings. >> >> (My first email was dissaproved as it was too large) >> >> Den ons. 12. sep. 2018 kl. 19:05 skrev Håvard <hovardslill(a)gmail.com>: >>> >>> I think this is right! >>> >>> I first booted up, then tested speakers (That I could not hear) and then >>> tested microphone (Which worked perfectly) in windows settings. >>> >>> -Håvard >>> >>> Den ons. 12. sep. 2018 kl. 18:49 skrev Connor McAdams >>> <conmanx360(a)gmail.com>: >>>> >>>> Also, sorry to keep sending more replies, make sure the only trace you >>>> have on is vfio_region_write, and not the read one. The read spams up >>>> the console. >>>> >>>> On Wed, Sep 12, 2018 at 12:43 PM, Connor McAdams <conmanx360(a)gmail.com> >>>> wrote: >>>> > Reason being, it may not have identified the CORB buffer properly or >>>> > something. That's very odd to have no data. Never seen that before. >>>> > >>>> > On Wed, Sep 12, 2018 at 12:42 PM, Connor McAdams >>>> > <conmanx360(a)gmail.com> wrote: >>>> >> Could you try again and make a copy of your terminal output? >>>> >> >>>> >> On Wed, Sep 12, 2018 at 12:41 PM, Håvard <hovardslill(a)gmail.com> >>>> >> wrote: >>>> >>> Hi again. >>>> >>> Sorry for not noticing all files were empty, did it not run for long >>>> >>> enough? >>>> >>> >>>> >>> -Håvard >>>> >>> >>>> >>> Den ons. 12. sep. 2018 kl. 18:39 skrev Håvard >>>> >>> <hovardslill(a)gmail.com>: >>>> >>>> >>>> >>>> Sorry my bad again it was working perfectly, just missed a step. >>>> >>>> >>>> >>>> I'll add the dumps as an attatchment. I had both external headset >>>> >>>> and >>>> >>>> microphone plugged in and let the VM run in the background for >>>> >>>> ~30min while >>>> >>>> doing other stuff. I did not play music or test my microphone in >>>> >>>> the VM >>>> >>>> either, If i did anything wrong, please tell me! >>>> >>>> >>>> >>>> It stopped at 0x104f4 >>>> >>>> >>>> >>>> -Håvard >>>> >>>> >>>> >>>> Den ons. 12. sep. 2018 kl. 00:31 skrev Connor McAdams >>>> >>>> <conmanx360(a)gmail.com>: >>>> >>>>> >>>> >>>>> Hm.... that's odd. They should show up in the folder you ran the >>>> >>>>> command from. Does your console show any "DumpMem entered..." or >>>> >>>>> something like that? You may have a permissions error. I've had >>>> >>>>> some >>>> >>>>> people report that as an issue before. >>>> >>>>> >>>> >>>>> On Tue, Sep 11, 2018 at 5:08 PM, Håvard <hovardslill(a)gmail.com> >>>> >>>>> wrote: >>>> >>>>> > Hi! >>>> >>>>> > >>>> >>>>> > Took a while, but I think I got it working. Did not see any >>>> >>>>> > "frame[xx]" >>>> >>>>> > files though. What dumps do you want? >>>> >>>>> > >>>> >>>>> > -Håvard >>>> >>>>> > >>>> >>>>> > Den tir. 11. sep. 2018 kl. 21:27 skrev Håvard >>>> >>>>> > <hovardslill(a)gmail.com>: >>>> >>>>> >> >>>> >>>>> >> Sorry about that, I forgot to enable a kernel config... >>>> >>>>> >> >>>> >>>>> >> -Håvard >>>> >>>>> >> >>>> >>>>> >> Den tir. 11. sep. 2018 kl. 21:20 skrev Connor McAdams >>>> >>>>> >> <conmanx360(a)gmail.com>: >>>> >>>>> >>> >>>> >>>>> >>> When it's bound as a stub, it shouldn't show up in alsamixer >>>> >>>>> >>> controls. >>>> >>>>> >>> You can check what module is loaded by doing lspci -v . It >>>> >>>>> >>> should say >>>> >>>>> >>> kernel driver in use: pci-stub. Also, did you run the >>>> >>>>> >>> vfio-bind >>>> >>>>> >>> script >>>> >>>>> >>> before trying it? >>>> >>>>> >>> >>>> >>>>> >>> On Tue, Sep 11, 2018 at 3:18 PM, Håvard >>>> >>>>> >>> <hovardslill(a)gmail.com> >>>> >>>>> >>> wrote: >>>> >>>>> >>> > Thank you for the offer! >>>> >>>>> >>> > >>>> >>>>> >>> > I run gentoo, but your github guide is very useful. I can't >>>> >>>>> >>> > seem to >>>> >>>>> >>> > bind my >>>> >>>>> >>> > audio driver to a pci-stud. Is the Sound card still supposed >>>> >>>>> >>> > to >>>> >>>>> >>> > function as >>>> >>>>> >>> > normal when I (think I) have bound it to a stud. >>>> >>>>> >>> > >>>> >>>>> >>> > -Håvard >>>> >>>>> >>> > >>>> >>>>> >>> > Den tir. 11. sep. 2018 kl. 20:26 skrev Connor McAdams >>>> >>>>> >>> > <conmanx360(a)gmail.com>: >>>> >>>>> >>> >> >>>> >>>>> >>> >> One thing you could try, is using the program I used to >>>> >>>>> >>> >> reverse >>>> >>>>> >>> >> engineer the Sound Blaster Z series of cards, QemuHDADump. >>>> >>>>> >>> >> If your >>>> >>>>> >>> >> processor supports pci-passthrough with a virtual machine, >>>> >>>>> >>> >> you >>>> >>>>> >>> >> could >>>> >>>>> >>> >> run a Windows virtual machine with the sound card in it and >>>> >>>>> >>> >> capture >>>> >>>>> >>> >> the commands. I'd be willing to look through the dumps to >>>> >>>>> >>> >> see if >>>> >>>>> >>> >> there >>>> >>>>> >>> >> are any special verbs or anything. >>>> >>>>> >>> >> >>>> >>>>> >>> >> You can find the program here: >>>> >>>>> >>> >> https://github.com/Conmanx360/QemuHDADump >>>> >>>>> >>> >> >>>> >>>>> >>> >> Let me know. >>>> >>>>> >>> >> >>>> >>>>> >>> >> On Tue, Sep 11, 2018 at 2:15 PM, Håvard >>>> >>>>> >>> >> <hovardslill(a)gmail.com> >>>> >>>>> >>> >> wrote: >>>> >>>>> >>> >> > Sorry, my gmail didn't update so I wrote my response >>>> >>>>> >>> >> > before I >>>> >>>>> >>> >> > read >>>> >>>>> >>> >> > your >>>> >>>>> >>> >> > last one. >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > It is a separate mic port as the G751JT doesn't have any >>>> >>>>> >>> >> > headset >>>> >>>>> >>> >> > multijacks. >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > I'll try and dig around in the kernel! Thanks for the >>>> >>>>> >>> >> > tip! >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > -Håvard >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > Den tir. 11. sep. 2018 kl. 20:09 skrev Håvard >>>> >>>>> >>> >> > <hovardslill(a)gmail.com>: >>>> >>>>> >>> >> > >>>> >>>>> >>> >> >> Thank you for taking your time and trying to help! :) >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >> Do you know where I can ask around for more help on the >>>> >>>>> >>> >> >> issue? >>>> >>>>> >>> >> >> I >>>> >>>>> >>> >> >> don't >>>> >>>>> >>> >> >> want to give up yet. >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >> -Håvard >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >> Den tir. 11. sep. 2018 kl. 20:02 skrev Takashi Iwai >>>> >>>>> >>> >> >> <tiwai(a)suse.de>: >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> >>> On Tue, 11 Sep 2018 19:14:37 +0200, >>>> >>>>> >>> >> >>> Håvard wrote: >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> > Yes, microphone gets detected instantly and it >>>> >>>>> >>> >> >>> > automatically >>>> >>>>> >>> >> >>> > changes >>>> >>>>> >>> >> >>> > to >>>> >>>>> >>> >> >>> it >>>> >>>>> >>> >> >>> > in pavucontrol. >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> Then it likely requires some additional initialization >>>> >>>>> >>> >> >>> outside >>>> >>>>> >>> >> >>> HD-audio. It's hard to know, as it's pretty much >>>> >>>>> >>> >> >>> vendor-specific. >>>> >>>>> >>> >> >>> You can dig down the Windows, but I have no idea about >>>> >>>>> >>> >> >>> Windows >>>> >>>>> >>> >> >>> implementation, so can't give any hints, unfortunately. >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> Takashi >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> > Den tir. 11. sep. 2018 kl. 18:52 skrev Takashi Iwai >>>> >>>>> >>> >> >>> > <tiwai(a)suse.de>: >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> > > On Tue, 11 Sep 2018 18:40:23 +0200, >>>> >>>>> >>> >> >>> > > Håvard wrote: >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > Thank you for replying! >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > Enabling loopback in alsamixer: >>>> >>>>> >>> >> >>> > > > http://i.imgur.com/lNo6e7T.png >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > And unmuting more and more things in "Mic >>>> >>>>> >>> >> >>> > > > Playback >>>> >>>>> >>> >> >>> > > > Volume" >>>> >>>>> >>> >> >>> > > > in >>>> >>>>> >>> >> >>> > > hdaanalyzer: >>>> >>>>> >>> >> >>> > > > http://i.imgur.com/H0HiOhy.png >>>> >>>>> >>> >> >>> > > > made white noise come from the headset. However >>>> >>>>> >>> >> >>> > > > it did >>>> >>>>> >>> >> >>> > > > not >>>> >>>>> >>> >> >>> > > > change or >>>> >>>>> >>> >> >>> > > react >>>> >>>>> >>> >> >>> > > > at all when I talked or even muted the microphone >>>> >>>>> >>> >> >>> > > > physically. >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > I couldn't find "Mic Playback Switch" anywhere in >>>> >>>>> >>> >> >>> > > > either >>>> >>>>> >>> >> >>> > > > alsamixer >>>> >>>>> >>> >> >>> or >>>> >>>>> >>> >> >>> > > > hdaanalyzer. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > It's a mixer mute switch. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > > The microphone works perfectly fine under >>>> >>>>> >>> >> >>> > > > Windows, so I >>>> >>>>> >>> >> >>> > > > don't >>>> >>>>> >>> >> >>> > > > think >>>> >>>>> >>> >> >>> it is >>>> >>>>> >>> >> >>> > > > the mic pin. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > But the fact above indicates the possibility of the >>>> >>>>> >>> >> >>> > > wrong >>>> >>>>> >>> >> >>> > > pin, >>>> >>>>> >>> >> >>> > > too. >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > Does the jack detection of the ext mic pin work? >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > Takashi >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > -Håvard >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > Den man. 10. sep. 2018 kl. 22:39 skrev Takashi >>>> >>>>> >>> >> >>> > > > Iwai >>>> >>>>> >>> >> >>> > > > <tiwai(a)suse.de >>>> >>>>> >>> >> >>> >: >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > > > On Thu, 06 Sep 2018 20:44:30 +0200, >>>> >>>>> >>> >> >>> > > > > Håvard wrote: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > Additional relevant info: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > A similar issue was also discussed three >>>> >>>>> >>> >> >>> > > > > > years ago >>>> >>>>> >>> >> >>> > > > > > on >>>> >>>>> >>> >> >>> > > > > > Sun >>>> >>>>> >>> >> >>> > > > > > Jun >>>> >>>>> >>> >> >>> > > 17:15:54 >>>> >>>>> >>> >> >>> > > > > CEST >>>> >>>>> >>> >> >>> > > > > > 2015 and was about his surround sound setup, >>>> >>>>> >>> >> >>> > > > > > but did >>>> >>>>> >>> >> >>> > > > > > not >>>> >>>>> >>> >> >>> > > > > > touch >>>> >>>>> >>> >> >>> on the >>>> >>>>> >>> >> >>> > > > > > external microphone problem: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> http://mailman.alsa-project.org/pipermail/alsa-devel/2015-June/093317.html >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > alsa-info.sh: >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >>> http://www.alsa-project.org/db/?f=1d8616ba5977308e03db6c3a86e36e9e9b38d6f0 >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > Graph of ALC668 chipset from hdaanalyzer: >>>> >>>>> >>> >> >>> > > > > > http://i.imgur.com/c08DNJW.png >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > setting alsa-mode[1-8] does nothing to help >>>> >>>>> >>> >> >>> > > > > > the >>>> >>>>> >>> >> >>> > > > > > issue. >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > There are several of similar bug reports >>>> >>>>> >>> >> >>> > > > > > around the >>>> >>>>> >>> >> >>> > > > > > web >>>> >>>>> >>> >> >>> experiencing >>>> >>>>> >>> >> >>> > > > > > similar issues, and on different distros. >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > Microphone works perfectly in windows >>>> >>>>> >>> >> >>> > > > > > >>>> >>>>> >>> >> >>> > > > > > I have a ASUS ROG G751JT, but this problem >>>> >>>>> >>> >> >>> > > > > > seems to >>>> >>>>> >>> >> >>> > > > > > happen >>>> >>>>> >>> >> >>> > > > > > with >>>> >>>>> >>> >> >>> all >>>> >>>>> >>> >> >>> > > > > laptops >>>> >>>>> >>> >> >>> > > > > > under the G751 name. >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > When you enable the loopback volume and switch, >>>> >>>>> >>> >> >>> > > > > and >>>> >>>>> >>> >> >>> > > > > unmute/adjust >>>> >>>>> >>> >> >>> "Mic >>>> >>>>> >>> >> >>> > > > > Playback Volume", and "Mic Playback Switch", do >>>> >>>>> >>> >> >>> > > > > you >>>> >>>>> >>> >> >>> > > > > hear >>>> >>>>> >>> >> >>> > > > > the >>>> >>>>> >>> >> >>> > > > > input >>>> >>>>> >>> >> >>> > > > > from the ext mic? It's a route directly from >>>> >>>>> >>> >> >>> > > > > NID 0x18 >>>> >>>>> >>> >> >>> > > > > to >>>> >>>>> >>> >> >>> > > > > the >>>> >>>>> >>> >> >>> mixer >>>> >>>>> >>> >> >>> > > > > NID 0x0b, then output mixer NID 0x0c, then >>>> >>>>> >>> >> >>> > > > > outputs. >>>> >>>>> >>> >> >>> > > > > So >>>> >>>>> >>> >> >>> > > > > this >>>> >>>>> >>> >> >>> > > > > can >>>> >>>>> >>> >> >>> be >>>> >>>>> >>> >> >>> > > > > used to verify the hardware routing. >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > If you don't hear via this route, it means that >>>> >>>>> >>> >> >>> > > > > the >>>> >>>>> >>> >> >>> > > > > input >>>> >>>>> >>> >> >>> > > > > from >>>> >>>>> >>> >> >>> the ext >>>> >>>>> >>> >> >>> > > > > mic pin itself is broken, and it implies that >>>> >>>>> >>> >> >>> > > > > something >>>> >>>>> >>> >> >>> > > > > outside >>>> >>>>> >>> >> >>> > > > > HD-audio codec. >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > > Takashi >>>> >>>>> >>> >> >>> > > > > >>>> >>>>> >>> >> >>> > > > [2 <text/html; UTF-8 (quoted-printable)>] >>>> >>>>> >>> >> >>> > > > >>>> >>>>> >>> >> >>> > > >>>> >>>>> >>> >> >>> > [2 <text/html; UTF-8 (quoted-printable)>] >>>> >>>>> >>> >> >>> > >>>> >>>>> >>> >> >>> >>>> >>>>> >>> >> >> >>>> >>>>> >>> >> > _______________________________________________ >>>> >>>>> >>> >> > Alsa-devel mailing list >>>> >>>>> >>> >> > Alsa-devel(a)alsa-project.org >>>> >>>>> >>> >> > >>>> >>>>> >>> >> > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

3 26

[alsa-devel] [PATCH v2 0/5] ASoC: qdsp6: add compress offload support
by Srinivas Kandagatla 05 Oct '18

05 Oct '18

This patchset adds support to very basic MP3 playback compress offload support via QDSP ASM module. Tested this patchset on DB410c with APQ8016 and DB820c with APQ8096 using tinycompress library. Adding other codec support should be trivial w.r.t qdsp6 side, however there are other dependencies like compress UAPI header changes and FastRPC which are being worked in parallel. Once ready will post them! thanks, srini Changes since v1 (https://patchwork.kernel.org/cover/10585805/) - added support to snd_compr_set_runtime_buffer() - make use of generic copy function - few trivial cleanups suggested by Vinod Koul Srinivas Kandagatla (5): ALSA: soc-compress: add support to snd_compr_set_runtime_buffer() ALSA: compress: make use of runtime buffer for copy ASoC: q6asm-dai: dt-bindings: Add support to compress dais ASoC: qdsp6: q6asm: add support to MP3 format ASoC: qdsp6: q6asm-dai: Add support to compress offload .../devicetree/bindings/sound/qcom,q6asm.txt | 27 ++ include/sound/compress_driver.h | 19 + sound/core/compress_offload.c | 18 +- sound/soc/qcom/Kconfig | 1 + sound/soc/qcom/qdsp6/q6asm-dai.c | 377 +++++++++++++++++- sound/soc/qcom/qdsp6/q6asm.c | 5 + 6 files changed, 443 insertions(+), 4 deletions(-) -- 2.19.0

2 9

[alsa-devel] Problem and Patch for B&W PX Bluetooth Headphones
by Nicolas Herochao 04 Oct '18

04 Oct '18

Hello, I'm writing this mail because of a Crash when connecting the B&W PX headphones via usb. Half a year ago this used to work with Linux after setting the default sample rate of pulseaudio to 48000k. A Launchpad Bug seems to describe this exact issue (detailed description below): https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1773697. It pointed me to the right direction, and today I have successfully compiled and tested a small patch that fixes the errors while also setting the sample rate to 48000k, making these headphones plug&play on any newer firmware. They sound awesome via USB! I would like to submit this patch, but it would be my first contribution and it could potentially break the B&W PX on older firmware. I can't test it since I see no obvious ways to downgrade the firmware. The automatic detection of these headphones always worked except for the sample-rate and perhaps the worst result is that old firmware will show a non-functional microphone, like on Windows. So I decided to first present the patch on this mailing list and ask for feedback and help. If anyone wants to pick the patch up, I'd appreciate that as well. My questions: * Can a quirk somehow handle multiple firmware versions of a usb device? * If not: Will this quirk allow old firmware to work out of the box but show a non-functional microphone? (And is that okay?) Thanks for your time and any feedback you can provide! Sincerely, Nicolas PS: more detail on the cause of the issue: ------ A quirk in snd-usb-audio was added to automate setting sample rate to 4800k and remove the previously exposed nonfunctional microphone: commit 240a8af929c7c57dcde28682725b29cf8474e8e5 https://lore.kernel.org/patchwork/patch/919689/ However the headphones where updated shortly after that to remove the unintentional microphone functionality. I guess because of this the headphones now crash when connecting them via USB while the quirk is active with the following dmesg errors: snd-usb-audio: probe of 2-3:1.0 failed with error -22 usb 2-3: 2:1: cannot get min/max values for control 2 (id 2) --------------- Finally, here is the patch (based on the current mainline kernel and generated according to all Guidelines I could find) which fixes the quirk by removing the microphone part: ---------------- From 748587283db85e219902abf4ac012864005943c8 Mon Sep 17 00:00:00 2001 From: Nicolas Huaman <nicolas(a)herochao.de> Date: Fri, 28 Sep 2018 18:05:15 +0200 Subject: [PATCH 1/1] SOUND: update quirk for B&W PX to remove microphone Signed-off-by: Nicolas Huaman <nicolas(a)herochao.de> --- sound/usb/quirks-table.h | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 08aa78007020..849953e5775c 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3346,19 +3346,14 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), .ifnum = 0, .type = QUIRK_AUDIO_STANDARD_MIXER, }, - /* Capture */ - { - .ifnum = 1, - .type = QUIRK_IGNORE_INTERFACE, - }, /* Playback */ { - .ifnum = 2, + .ifnum = 1, .type = QUIRK_AUDIO_FIXED_ENDPOINT, .data = &(const struct audioformat) { .formats = SNDRV_PCM_FMTBIT_S16_LE, .channels = 2, - .iface = 2, + .iface = 1, .altsetting = 1, .altset_idx = 1, .attributes = UAC_EP_CS_ATTR_FILL_MAX | -- 2.19.0

2 1

[alsa-devel] [PATCH 0/7] Add devres support to card resources
by Takashi Iwai 04 Oct '18

04 Oct '18

Hi, here is the patchset containing the changes to support a device-managed resource management for ALSA card and memory pages. The actual code changes are identical with the previous RFC series, but a few documentation updates are included in this official set. Takashi === Takashi Iwai (7): ALSA: core: Add device-managed page allocator helper ALSA: core: Add managed card creation ALSA: intel8x0: Allocate resources with device-managed APIs ALSA: atiixp: Allocate resources with device-managed APIs ALSA: hda: Allocate resources with device-managed APIs ALSA: doc: Brush up the old writing-an-alsa-driver ALSA: doc: Add device-managed resource section .../kernel-api/writing-an-alsa-driver.rst | 340 ++++++++++-------- include/sound/core.h | 5 + include/sound/memalloc.h | 4 + sound/core/init.c | 95 ++++- sound/core/memalloc.c | 88 ++++- sound/pci/atiixp.c | 104 ++---- sound/pci/atiixp_modem.c | 104 ++---- sound/pci/hda/hda_controller.h | 1 - sound/pci/hda/hda_intel.c | 43 +-- sound/pci/intel8x0.c | 143 +++----- sound/pci/intel8x0m.c | 143 +++----- 11 files changed, 514 insertions(+), 556 deletions(-) -- 2.18.0

2 19

[alsa-devel] Thread spinning in kernel snd_pcm_link()/snd_pcm_unlink()
by Rob Duncan 02 Oct '18

02 Oct '18

I'm trying to address a bug where we end up with a thread spinning and consuming an entire cpu. The issue seems to be this code in sound/core/pcm_native.c: /* Writer in rwsem may block readers even during its waiting in queue, * and this may lead to a deadlock when the code path takes read sem * twice (e.g. one in snd_pcm_action_nonatomic() and another in * snd_pcm_stream_lock()). As a (suboptimal) workaround, let writer to * spin until it gets the lock. */ static inline void down_write_nonblock(struct rw_semaphore *lock) { while (!down_write_trylock(lock)) cond_resched(); } The original commit for this is 67ec1072b053c15564e6090ab30127895dc77a89 What we're suspecting is that a normal thread (SCHED_OTHER) has a reader lock and a real-time thread using SCHED_RR or SCHED_FIFO is trying to take the writer lock. If both threads are pinned to the same CPU for some reason then the reader thread will never get scheduled (because the real-time writer thread is still runnable), and we will never make progress. Does this sound right? What can we do to fix this? Thanks, Rob.

2 2

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel September 2018