February 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: hdac_hdmi: Program pin-port-mux during jack report event
by Guneshwor Singh 19 Mar '18

19 Mar '18

From: Sriram Periyasamy <sriramx.periyasamy(a)intel.com> During d3/d0 cycle, the connection selection index of all pins points to the default value. This needs to be restored to ensure audio is restored after d3/d0 cycle. So store the connection selection index and program it during jack report event which gets invoked in cases like d3/d0 cycle, hot plug detection when multiple displays are connected. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy(a)intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale(a)intel.com> Signed-off-by: Jeeja KP <jeeja.kp(a)intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh(a)intel.com> --- sound/soc/codecs/hdac_hdmi.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index dba6f4c5074a..cabcb75bf4fc 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -32,6 +32,7 @@ #include <sound/hda_chmap.h> #include "../../hda/local.h" #include "hdac_hdmi.h" +#include <sound/hda_regmap.h> #define NAME_SIZE 32 @@ -83,6 +84,7 @@ struct hdac_hdmi_pin { struct list_head head; hda_nid_t nid; bool mst_capable; + int conn_index; struct hdac_hdmi_port *ports; int num_ports; struct hdac_ext_device *edev; @@ -141,6 +143,9 @@ struct hdac_hdmi_priv { #define hdev_to_hdmi_priv(_hdev) ((to_ehdac_device(_hdev))->private_data) +static int hdac_hdmi_port_select_set(struct hdac_ext_device *edev, + struct hdac_hdmi_port *port); + static struct hdac_hdmi_pcm * hdac_hdmi_get_pcm_from_cvt(struct hdac_hdmi_priv *hdmi, struct hdac_hdmi_cvt *cvt) @@ -159,6 +164,7 @@ static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm, struct hdac_hdmi_port *port, bool is_connect) { struct hdac_ext_device *edev = port->pin->edev; + int cmd, err; if (is_connect) snd_soc_dapm_enable_pin(port->dapm, port->jack_pin); @@ -166,6 +172,29 @@ static void hdac_hdmi_jack_report(struct hdac_hdmi_pcm *pcm, snd_soc_dapm_disable_pin(port->dapm, port->jack_pin); if (is_connect) { + /* set the device if pin is mst_capable */ + if (hdac_hdmi_port_select_set(edev, port) < 0) { + dev_err(&edev->hdev.dev, + "port %d device select fail\n", port->id); + return; + } + /* + * Restore the connection selection index of the + * respective pin. + */ + if (port->pin->conn_index > 0) { + cmd = snd_hdac_regmap_encode_verb(port->pin->nid, + AC_VERB_SET_CONNECT_SEL); + err = snd_hdac_regmap_write_raw(&edev->hdev, cmd, + port->pin->conn_index - 1); + if (err < 0) { + dev_err(&edev->hdev.dev, + "pin %d conn select index fail %d\n", + port->pin->nid, err); + return; + } + } + /* * Report Jack connect event when a device is connected * for the first time where same PCM is attached to multiple @@ -891,6 +920,9 @@ static int hdac_hdmi_set_pin_port_mux(struct snd_kcontrol *kcontrol, } } + if (ucontrol->value.enumerated.item[0] > 0) + port->pin->conn_index = ucontrol->value.enumerated.item[0]; + /* * Jack status is not reported during device probe as the * PCMs are not registered by then. So report it here. -- 2.16.1

2 1

[alsa-devel] [BUG] Kernel crash on Allwinner H3 due to sound core changes
by Jernej Škrabec 19 Mar '18

19 Mar '18

Hi all, with todays linux-next (next-20180228), kernel on Allwinner H3 SoC crashes with dmesg like that: https://pastebin.com/raw/0D5JeaJ8 I bisected the kernel and first offending commit is: be7ee5f32a9a ("ASoC: soc-generic-dmaengine-pcm: replace platform to component") I know that crash message is completely unrelated to sound subsystem, but it turns out that if I disable CONFIG_SND_SUN4I_CODEC kernel works ok, but this way I lose analog audio output. Any suggestions what can be the issue? Best regards, Jernej

3 12

[alsa-devel] [PATCH v1 0/6] ALSA: usb: UAC3. Add support for Basic Audio Device (BADD)
by Jorge Sanjuan 19 Mar '18

19 Mar '18

This adds functionality for the Basic Audio Device (BADD) subset that is defined in the USB Audio Class 3 (UAC3). In a BADD compliant driver, all Class Specific descriptors are inferred and so they should all be generated in the *host* as the device wont expose those. This also applies to the new HIGH CAPABILITY descriptor as the GET request is not to be supported in a BADD compliant driver. The new class requires the device to have 3 usb configurations as follows: 1: Legacy Mode: UAC1 or UAC2. 2: BADD device with a prefined topology. (Minimum). 3: UAC3 device for more detailed description or more complex devices that can't be covered by the BADD profile. This patch series also includes some minor fixes to sound/usb. It has been tested with an actual UAC3 compliant device in different host machines and all configs (UAC1/2, BADD and UAC3) work. Also, this has been implemented on top of the the patch which adds UAC3 support to the usb sound card driver: commit ddd452d7b04b86fb5f9285a19ac54deca9264ac1 Author: Ruslan Bilovol <ruslan.bilovol(a)gmail.com> Date: Tue Nov 7 04:01:20 2017 +0200 Jorge Sanjuan (6): usb: audio: Add bi-directional terminal types. usb: audio: Fix variable length field to be variable. ALSA: usb: UAC3. Add initial mixer support. ALSA: usb: Only get AudioControl header for UAC1 class. ALSA: usb: Use Class Specific EP for UAC3 devices. ALSA: usb: ADC3: Add initial BADD spec support include/linux/usb/audio-v3.h | 2 +- include/uapi/linux/usb/audio.h | 21 +- sound/usb/Makefile | 3 +- sound/usb/badd.c | 518 +++++++++++++++++++++++++++++++++++++++++ sound/usb/badd.h | 14 ++ sound/usb/card.c | 25 +- sound/usb/mixer.c | 24 ++ sound/usb/stream.c | 165 ++++++++----- sound/usb/usbaudio.h | 1 + 9 files changed, 702 insertions(+), 71 deletions(-) create mode 100644 sound/usb/badd.c create mode 100644 sound/usb/badd.h -- 2.11.0

4 11

[alsa-devel] [PATCH 0/2] TDA7419 audio processor driver
by Matt Porter 18 Mar '18

18 Mar '18

This series adds an ASoC component driver for the ST TDA7419 audio processor which is commonly used in automotive audio applications. The datasheet can be found at http://www.st.com/resource/en/datasheet/tda7419.pdf Matt Porter (2): ASoC: add tda7419 audio processor binding ASoC: add tda7419 audio processor driver .../devicetree/bindings/sound/tda7419.txt | 15 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tda7419.c | 571 +++++++++++++++++++++ 4 files changed, 594 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tda7419.txt create mode 100644 sound/soc/codecs/tda7419.c -- 2.11.0

4 10

[alsa-devel] [PATCH v2] sound: omap-twl4030: do not complain on -EPROBE_DEFER when initializing
by Ladislav Michl 14 Mar '18

14 Mar '18

Don't complain on -EPROBE_DEFER when initializing, the driver probe will be retried later. Signed-off-by: Ladislav Michl <ladis(a)linux-mips.org> Acked-by: Jarkko Nikula <jarkko.nikula(a)bitmer.com> --- Changes: -v2: fixed typo in commit log, added Jarkko Nikula's ack sound/soc/omap/omap-twl4030.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/omap/omap-twl4030.c b/sound/soc/omap/omap-twl4030.c index cccc316743fa..7c1f71884768 100644 --- a/sound/soc/omap/omap-twl4030.c +++ b/sound/soc/omap/omap-twl4030.c @@ -322,8 +322,10 @@ static int omap_twl4030_probe(struct platform_device *pdev) snd_soc_card_set_drvdata(card, priv); ret = devm_snd_soc_register_card(&pdev->dev, card); if (ret) { - dev_err(&pdev->dev, "devm_snd_soc_register_card() failed: %d\n", - ret); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "devm_snd_soc_register_card() failed: %d\n", + ret); return ret; } -- 2.16.1

2 1

[alsa-devel] [Xen-devel][PATCH 0/2] sndif: add explicit back and front synchronization
by Oleksandr Andrushchenko 14 Mar '18

14 Mar '18

From: Oleksandr Andrushchenko <oleksandr_andrushchenko(a)epam.com> Hi, all! Foreword ======== This change is aimed to add support for explicit back and front synchronization during playback and capture in response to comments raised during upstream attempt of the para-virtualized sound frontend driver for Xen [1], [2] and gather opinions from the relevant communities (ALSA, Xen) on the change. The relevant backend is implemented as a user-space application [3] and uses accompanying helper library [4]. Both frontend driver and backend were tested on real HW running Xen hypervisor (Renesas R-Car ARM based H3/M3 boards, x86) to make sure the proposed solution does work. Rationale ========= During the first attempt to upstream the Linux front driver [5] number of comments and concerns were raised, one of the biggest flaws in the design were questioned by both Clemens Ladisch [6] and Takashi Sakamoto [7]: the absence of synchronization between frontend and backend during capture/playback. Two options were discussed: “In design of ALSA PCM core, drivers are expected to synchronize to actual hardwares for semi-realtime data transmission. The synchronization is done by two points: 1) Interrupts to respond events from actual hardwares. 2) Positions of actual data transmission in any serial sound interfaces of actual hardwares. “ and finally a change to the existing protocol was suggested: “In 'include/xen/interface/io/sndif.h', there's no functionalities I described the above: 1. notifications from DomU to Dom0 about the size of period for interrupts from actual hardwares. Or no way from Dom0 to DomU about the configured size of the period. 2. notifications of the interrupts from actual hardwares to DomU.” This is implemented as a change to the sndif protocol and allows removing period emulation: 1. Introduced a new event channel from back to front 2. New event with number of bytes played/captured (XENSND_EVT_CUR_POS, to be used for sending snd_pcm_period_elapsed at frontend (in Linux implementation). Sent in bytes, not frames to make the protocol generic and consistent) 3. New request for playback/capture control (XENSND_OP_TRIGGER) with start/pause/stop/resume sub-ops 4. Playback/capture buffer size is set on the backend side via XENSND_FIELD_BUFFER_SIZE XenStore entry Waiting for your valuable comments, Thank you, Oleksandr [1] https://github.com/andr2000/linux/commits/snd_upstream_v1 [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/inc… [3] https://github.com/xen-troops/snd_be [4] https://github.com/xen-troops/libxenbe [5] https://lkml.org/lkml/2017/8/7/363 [6] http://mailman.alsa-project.org/pipermail/alsa-devel/2017-August/123617.html [7] http://mailman.alsa-project.org/pipermail/alsa-devel/2017-August/123744.html Oleksandr Andrushchenko (2): sndif: introduce protocol version sndif: add explicit back and front synchronization xen/include/public/io/sndif.h | 173 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 170 insertions(+), 3 deletions(-) -- 2.7.4

4 29

[alsa-devel] [PATCH] ASoC: mt8173-rt5650: fix child-node lookup
by Johan Hovold 12 Mar '18

12 Mar '18

This driver used the wrong OF-helper when looking up the optional capture-codec child node during probe. Instead of searching just children of the sound node, a tree-wide depth-first search starting at the unrelated platform node was done. Not only could this end up matching an unrelated node or no node at all; the platform node could also be prematurely freed since of_find_node_by_name() drops a reference to its first argument. This particular pattern has been observed leading to crashes after probe deferrals in other drivers. Fix this by dropping the broken call to of_find_node_by_name() and keeping only the second, correct lookup using of_get_child_by_name() while taking care not to bail out if the optional node is missing. Note that this also addresses two capture-codec node-reference leaks (one for each of the original helper calls). Compile tested only. Fixes: d349caeb0510 ("ASoC: mediatek: Add second I2S on mt8173-rt5650 machine driver") Cc: PC Liao <pc.liao(a)mediatek.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> --- sound/soc/mediatek/mt8173/mt8173-rt5650.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/sound/soc/mediatek/mt8173/mt8173-rt5650.c b/sound/soc/mediatek/mt8173/mt8173-rt5650.c index 40ebefd625c1..679fc8bea0a3 100644 --- a/sound/soc/mediatek/mt8173/mt8173-rt5650.c +++ b/sound/soc/mediatek/mt8173/mt8173-rt5650.c @@ -272,15 +272,10 @@ static int mt8173_rt5650_dev_probe(struct platform_device *pdev) } mt8173_rt5650_codecs[1].of_node = mt8173_rt5650_codecs[0].of_node; - if (of_find_node_by_name(platform_node, "codec-capture")) { - np = of_get_child_by_name(pdev->dev.of_node, "codec-capture"); - if (!np) { - dev_err(&pdev->dev, - "%s: Can't find codec-capture DT node\n", - __func__); - return -EINVAL; - } + np = of_get_child_by_name(pdev->dev.of_node, "codec-capture"); + if (np) { ret = snd_soc_of_get_dai_name(np, &codec_capture_dai); + of_node_put(np); if (ret < 0) { dev_err(&pdev->dev, "%s codec_capture_dai name fail %d\n", -- 2.13.6

2 3

[alsa-devel] [PATCH 0/9] Enablement of BT I2S controller instance for AMD APUs
by Vijendar Mukunda 09 Mar '18

09 Mar '18

This patch set updates Audio CoProcessor (ACP) audio drivers to enable BT I2S controller instance. Default enabled I2S controller instance is I2S SP instance. There is a requirement to enable BT I2S controller Instance along with I2S SP controller instance. This patch set bring up functionality to render & capture on BT I2S controller instance. The current code is based on asoc-next, but I'm happy to rebase on whatever tree this ends up going through if there are any problems applying. Vijendar Mukunda (9): ASoC: amd: renaming pcm substream names and bytescount params ASoC: amd: Coding style changes for acp dma driver ASoC: amd: dma driver changes for BT I2S controller instance ASoC: amd: dma descriptor changes for BT I2S Instance ASoC: amd: Interrupt handler changes for BT I2S instance ASoC: amd: pcm callbacks modifications for bt i2s instance ASoC: amd: modifications in dma stop sequence ASoC: amd: 16bit resolution support for bt i2s instance ASoC: amd: enabling bt i2s config after acp reset sound/soc/amd/acp-pcm-dma.c | 623 ++++++++++++++++++++++++++++++++------------ sound/soc/amd/acp.h | 61 ++++- 2 files changed, 514 insertions(+), 170 deletions(-) -- 2.7.4

3 16

[alsa-devel] [PATCH] ASoC: TSCS42xx: make const array norm_addrs static, reduces object code size
by Colin King 09 Mar '18

09 Mar '18

From: Colin Ian King <colin.king(a)canonical.com> Don't populate the const array norm_addrs on the stack, instead make it static. Makes the object code smaller by over 230 bytes. Also re-format array data as the insertion of the static keywork made the first line overly long. Before: text data bss dec hex filename 53780 34752 256 88788 15ad4 linux/sound/soc/codecs/tscs42xx.o After: text data bss dec hex filename 53461 34840 256 88557 159ed linux/sound/soc/codecs/tscs42xx.o (gcc version 7.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king(a)canonical.com> --- sound/soc/codecs/tscs42xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/tscs42xx.c b/sound/soc/codecs/tscs42xx.c index e7661d0315e6..205a55a0329e 100644 --- a/sound/soc/codecs/tscs42xx.c +++ b/sound/soc/codecs/tscs42xx.c @@ -1317,11 +1317,13 @@ static struct snd_soc_codec_driver soc_codec_dev_tscs42xx = { static inline void init_coeff_ram_cache(struct tscs42xx *tscs42xx) { - const u8 norm_addrs[] = { 0x00, 0x05, 0x0a, 0x0f, 0x14, 0x19, 0x1f, - 0x20, 0x25, 0x2a, 0x2f, 0x34, 0x39, 0x3f, 0x40, 0x45, 0x4a, - 0x4f, 0x54, 0x59, 0x5f, 0x60, 0x65, 0x6a, 0x6f, 0x74, 0x79, - 0x7f, 0x80, 0x85, 0x8c, 0x91, 0x96, 0x97, 0x9c, 0xa3, 0xa8, - 0xad, 0xaf, 0xb0, 0xb5, 0xba, 0xbf, 0xc4, 0xc9, }; + static const u8 norm_addrs[] = { + 0x00, 0x05, 0x0a, 0x0f, 0x14, 0x19, 0x1f, 0x20, 0x25, 0x2a, + 0x2f, 0x34, 0x39, 0x3f, 0x40, 0x45, 0x4a, 0x4f, 0x54, 0x59, + 0x5f, 0x60, 0x65, 0x6a, 0x6f, 0x74, 0x79, 0x7f, 0x80, 0x85, + 0x8c, 0x91, 0x96, 0x97, 0x9c, 0xa3, 0xa8, 0xad, 0xaf, 0xb0, + 0xb5, 0xba, 0xbf, 0xc4, 0xc9, + }; u8 *coeff_ram = tscs42xx->coeff_ram; int i; -- 2.15.1

3 2

[alsa-devel] [PATCH v2 00/32] ASoC: rt5651: jack-detect fixes and improvements
by Hans de Goede 07 Mar '18

07 Mar '18

Hi All, Here is v2 of my rt5651 codec and Intel machine-driver series which mainly consists of various jack-detect related fixes and improvements. As discussed in the review of v1 I've made the following changes: 1) Get rid of platform_data and use device-properties instead 2) Split up a couple of the micbias / OVCD / jack-detect patches into smaller patches, as they were doing too much in a single patch 3) Improved commit messages 4) Concentrate the knowledge that SSP0 is 16 bits on BYTCR in the fixup function and extract the sample-format from the hw_params in other places Regards, Hans

4 64