January 2018 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [alsa-utils] [PATCH] Add support for no-rewind flag in aplay utility
by Sriram Periyasamy 07 Feb '18

07 Feb '18

From: Ramesh Babu <ramesh.babu(a)intel.com> The "no-rewind" flag is introduced in alsa. Application can use this flag to assure kernel driver that rewind won't be exercised. Driver could use this flag to alter it's buffering scheme to optimize power and performance. Signed-off-by: Ramesh Babu <ramesh.babu(a)intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy(a)intel.com> --- aplay/aplay.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/aplay/aplay.c b/aplay/aplay.c index 6b740c281f8e..b50602a59024 100644 --- a/aplay/aplay.c +++ b/aplay/aplay.c @@ -108,6 +108,7 @@ static snd_pcm_stream_t stream = SND_PCM_STREAM_PLAYBACK; static int mmap_flag = 0; static int interleaved = 1; static int nonblock = 0; +static int no_rewind = 0; static volatile sig_atomic_t in_aborting = 0; static u_char *audiobuf = NULL; static snd_pcm_uframes_t chunk_size = 0; @@ -229,6 +230,7 @@ _("Usage: %s [OPTION]... [FILE]...\n" "-I, --separate-channels one file for each channel\n" "-i, --interactive allow interactive operation from stdin\n" "-m, --chmap=ch1,ch2,.. Give the channel map to override or follow\n" +"-w, --no-rewind enables no rewind mode\n" " --disable-resample disable automatic rate resample\n" " --disable-channels disable automatic channel conversions\n" " --disable-format disable automatic format conversions\n" @@ -470,7 +472,7 @@ int main(int argc, char *argv[]) { int duration_or_sample = 0; int option_index; - static const char short_options[] = "hnlLD:qt:c:f:r:d:s:MNF:A:R:T:B:vV:IPCi" + static const char short_options[] = "hnlLD:qt:c:f:r:d:s:w:MNF:A:R:T:B:vV:IPCi" #ifdef CONFIG_SUPPORT_CHMAP "m:" #endif @@ -514,6 +516,7 @@ int main(int argc, char *argv[]) {"process-id-file", 1, 0, OPT_PROCESS_ID_FILE}, {"use-strftime", 0, 0, OPT_USE_STRFTIME}, {"interactive", 0, 0, 'i'}, + {"no-rewind", 0, 0, 'w'}, {"dump-hw-params", 0, 0, OPT_DUMP_HWPARAMS}, {"fatal-errors", 0, 0, OPT_FATAL_ERRORS}, #ifdef CONFIG_SUPPORT_CHMAP @@ -753,6 +756,9 @@ int main(int argc, char *argv[]) case 'i': interactive = 1; break; + case 'w': + no_rewind = 1; + break; case OPT_DISABLE_RESAMPLE: open_mode |= SND_PCM_NO_AUTO_RESAMPLE; break; @@ -1396,6 +1402,12 @@ static void set_params(void) &buffer_frames); } assert(err >= 0); + + if (no_rewind) { + err = snd_pcm_hw_params_set_no_rewind(handle, params, 1); + assert(err >= 0); + } + monotonic = snd_pcm_hw_params_is_monotonic(params); can_pause = snd_pcm_hw_params_can_pause(params); err = snd_pcm_hw_params(handle, params); -- 2.7.4

3 4

[alsa-devel] [PATCH v7 0/6] TDA1997x HDMI video receiver
by Tim Harvey 06 Feb '18

06 Feb '18

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q/IMX6DL which uses the TDA19971 with 16bits connected to the IMX6 CSI and single-lane I2S audio providing 2-channel audio. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - mbus format selection support for bus widths that support multiple formats - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media History: v7: - fix interlaced mode - support no AVI infoframe (ie DVI) (Hans) - add support for multiple output formats (Hans) v6: - tda1997x: fix return on regulator enablei in tda1997x_set_power() (Fabio) - tda1997x: fix colorspace handling (Hans) - bindings: added Robs's ack (Rob) - replace copyright with SPDX tag (Philippe) v5: - added v4l2_hdmi_colorimetry() patch from Hans to series - bindings: added Sakari's ack - tda1997x: uppercase string constants - tda1997x: use v4l2_hdmi_rx_coloriemtry to fill format - tda1997x: fix V4L2_CID_DV_RX_RGB_RANGE - tda1997x: fix interlaced mode format - dts: remove leading 0 from unit address - dts: add newline between property list and child node - dts: added missing audmux in GW551x dts v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC Media device topology: # media-ctl -d /dev/media0 -p Media controller API version 4.13.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.13.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x480@13000000 max:1920x1080@165000000 stds:CEA-861,DMT caps:progressive] [dv.detect:BT.656/1120 640x480p59 (800x525) stds:CEA-861,DMT flags:has-cea861-vic] [dv.current:BT.656/1120 1920x1080p60 (2200x1125) stds:CEA-861,DMT flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu1_csi0_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "tda19971 2-0048":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu1_csi0":0 [] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: (on /dev/video6 as v4l2-compliance doesn't yet support subdevs) Driver Info: Driver name : imx-media-captu Card type : imx-media-capture Bus info : platform:ipu2_csi0 Driver version: 4.13.0 Capabilities : 0x84200001 Video Capture Streaming Extended Pix Format Device Capabilities Device Caps : 0x04200001 Video Capture Streaming Extended Pix Format Compliance test for device /dev/video6 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) fail: v4l2-test-input-output.cpp(418): G_INPUT not supported for a capture device test VIDIOC_G/S/ENUMINPUT: FAIL test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK fail: v4l2-test-controls.cpp(574): g_ext_ctrls does not support count == 0 test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Total: 42, Succeeded: 40, Failed: 2, Warnings: 0 Hans Verkuil (1): v4l2-dv-timings: add v4l2_hdmi_colorimetry() Tim Harvey (5): MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 105 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 3476 ++++++++++++++++++++ drivers/media/v4l2-core/v4l2-dv-timings.c | 141 + include/dt-bindings/media/tda1997x.h | 74 + include/media/i2c/tda1997x.h | 41 + include/media/v4l2-dv-timings.h | 21 + 12 files changed, 4219 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

2 7

[alsa-devel] [PATCH] ASoC: codecs: Add support for AK5558 ADC driver
by Daniel Baluta 02 Feb '18

02 Feb '18

AK5558 is a 32-bit, 768 kHZ sampling, differential input ADC for digital audio systems. Datasheet is available at: https://www.akm.com/akm/en/file/datasheet/AK5558VN.pdf Initial patch includes support for normal and TDM modes. Signed-off-by: Junichi Wakasugi <wakasugi.jb(a)om.asahi-kasei.co.jp> Signed-off-by: Mihai Serban <mihai.serban(a)nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang(a)nxp.com> Signed-off-by: Daniel Baluta <daniel.baluta(a)nxp.com> --- Documentation/devicetree/bindings/sound/ak5558.txt | 20 + sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/ak5558.c | 754 +++++++++++++++++++++ sound/soc/codecs/ak5558.h | 60 ++ 5 files changed, 842 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ak5558.txt create mode 100644 sound/soc/codecs/ak5558.c create mode 100644 sound/soc/codecs/ak5558.h diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt new file mode 100644 index 0000000..c6c71af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -0,0 +1,20 @@ +AK5558 8 channel differential 32-bit delta-sigma ADC + +This device supports I2C mode only. + +Required properties: + +- compatible : "asahi-kasei,ak5558" +- reg : The I2C address of the device for I2C. +- asahi-kasei,pdn-gpios: A GPIO specifier for the GPIO controlling + the power down & reset pin. + +Example: + +&i2c { + ak5558: ak5558@10 { + compatible = "asahi-kasei,ak5558"; + reg = <0x10>; + asahi-kasei,pdn-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index c367d11..84a15d4 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -42,6 +42,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_AK4642 if I2C select SND_SOC_AK4671 if I2C select SND_SOC_AK5386 + select SND_SOC_AK5558 if I2C select SND_SOC_ALC5623 if I2C select SND_SOC_ALC5632 if I2C select SND_SOC_BT_SCO @@ -394,6 +395,11 @@ config SND_SOC_AK4671 config SND_SOC_AK5386 tristate "AKM AK5638 CODEC" +config SND_SOC_AK5558 + tristate "AKM AK5558 CODEC" + depends on I2C + select REGMAP_I2C + config SND_SOC_ALC5623 tristate "Realtek ALC5623 CODEC" depends on I2C diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 77c1818..3a3d8b1 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -33,6 +33,7 @@ snd-soc-ak4641-objs := ak4641.o snd-soc-ak4642-objs := ak4642.o snd-soc-ak4671-objs := ak4671.o snd-soc-ak5386-objs := ak5386.o +snd-soc-ak5558-objs := ak5558.o snd-soc-arizona-objs := arizona.o snd-soc-bt-sco-objs := bt-sco.o snd-soc-cq93vc-objs := cq93vc.o @@ -271,6 +272,7 @@ obj-$(CONFIG_SND_SOC_AK4641) += snd-soc-ak4641.o obj-$(CONFIG_SND_SOC_AK4642) += snd-soc-ak4642.o obj-$(CONFIG_SND_SOC_AK4671) += snd-soc-ak4671.o obj-$(CONFIG_SND_SOC_AK5386) += snd-soc-ak5386.o +obj-$(CONFIG_SND_SOC_AK5558) += snd-soc-ak5558.o obj-$(CONFIG_SND_SOC_ALC5623) += snd-soc-alc5623.o obj-$(CONFIG_SND_SOC_ALC5632) += snd-soc-alc5632.o obj-$(CONFIG_SND_SOC_ARIZONA) += snd-soc-arizona.o diff --git a/sound/soc/codecs/ak5558.c b/sound/soc/codecs/ak5558.c new file mode 100644 index 0000000..eeaeea9 --- /dev/null +++ b/sound/soc/codecs/ak5558.c @@ -0,0 +1,754 @@ +/* + * ak5558.c -- audio driver for AK5558 ADC + * + * Copyright (C) 2015 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/gpio/consumer.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/tlv.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/pm_runtime.h> + +#include "ak5558.h" + +#define AK5558_SLAVE_CKS_AUTO + +/* AK5558 Codec Private Data */ +struct ak5558_priv { + struct snd_soc_codec codec; + struct regmap *regmap; + struct i2c_client *i2c; + int fs; /* Sampling Frequency */ + int rclk; /* Master Clock */ + int pdn_gpio; /* Power on / Reset GPIO */ + int slots; + int slot_width; +}; + +/* ak5558 register cache & default register settings */ +static const struct reg_default ak5558_reg[] = { + { 0x0, 0xFF }, /* 0x00 AK5558_00_POWER_MANAGEMENT1 */ + { 0x1, 0x01 }, /* 0x01 AK5558_01_POWER_MANAGEMENT2 */ + { 0x2, 0x01 }, /* 0x02 AK5558_02_CONTROL1 */ + { 0x3, 0x00 }, /* 0x03 AK5558_03_CONTROL2 */ + { 0x4, 0x00 }, /* 0x04 AK5558_04_CONTROL3 */ + { 0x5, 0x00 } /* 0x05 AK5558_05_DSD */ +}; + +static const char * const mono_texts[] = { + "8 Slot", "2 Slot", "4 Slot", "1 Slot", +}; + +static const struct soc_enum ak5558_mono_enum[] = { + SOC_ENUM_SINGLE(AK5558_01_POWER_MANAGEMENT2, 1, + ARRAY_SIZE(mono_texts), mono_texts) +}; + +static const char * const tdm_texts[] = { + "Off", "TDM128", "TDM256", "TDM512", +}; + +static const char * const digfil_texts[] = { + "Sharp Roll-Off", "Show Roll-Off", + "Short Delay Sharp Roll-Off", "Short Delay Show Roll-Off", +}; + +static const struct soc_enum ak5558_adcset_enum[] = { + SOC_ENUM_SINGLE(AK5558_03_CONTROL2, 5, + ARRAY_SIZE(tdm_texts), tdm_texts), + SOC_ENUM_SINGLE(AK5558_04_CONTROL3, 0, + ARRAY_SIZE(digfil_texts), digfil_texts), +}; + +static const char * const dsdon_texts[] = { + "PCM", "DSD", +}; + +static const char * const dsdsel_texts[] = { + "64fs", "128fs", "256fs" +}; + +static const char * const dckb_texts[] = { + "Falling", "Rising", +}; + +static const char * const dcks_texts[] = { + "512fs", "768fs", +}; + +static const struct soc_enum ak5558_dsdset_enum[] = { + SOC_ENUM_SINGLE(AK5558_04_CONTROL3, 7, + ARRAY_SIZE(dsdon_texts), dsdon_texts), + SOC_ENUM_SINGLE(AK5558_05_DSD, 0, + ARRAY_SIZE(dsdsel_texts), dsdsel_texts), + SOC_ENUM_SINGLE(AK5558_05_DSD, 2, ARRAY_SIZE(dckb_texts), dckb_texts), + SOC_ENUM_SINGLE(AK5558_05_DSD, 5, ARRAY_SIZE(dcks_texts), dcks_texts), +}; + +static const struct snd_kcontrol_new ak5558_snd_controls[] = { + SOC_ENUM("AK5558 Monaural Mode", ak5558_mono_enum[0]), + SOC_ENUM("AK5558 TDM mode", ak5558_adcset_enum[0]), + SOC_ENUM("AK5558 Digital Filter", ak5558_adcset_enum[1]), + + SOC_ENUM("AK5558 DSD Mode", ak5558_dsdset_enum[0]), + SOC_ENUM("AK5558 Frequency of DCLK", ak5558_dsdset_enum[1]), + SOC_ENUM("AK5558 Polarity of DCLK", ak5558_dsdset_enum[2]), + SOC_ENUM("AK5558 Master Clock Frequency at DSD Mode", + ak5558_dsdset_enum[3]), + + SOC_SINGLE("AK5558 DSD Phase Modulation", AK5558_05_DSD, 3, 1, 0), +}; + +static const char * const ak5558_channel_select_texts[] = {"Off", "On"}; + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel1_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel1_mux_control = + SOC_DAPM_ENUM("Ch1 Switch", ak5558_channel1_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel2_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel2_mux_control = + SOC_DAPM_ENUM("Ch2 Switch", ak5558_channel2_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel3_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel3_mux_control = + SOC_DAPM_ENUM("Ch3 Switch", ak5558_channel3_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel4_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel4_mux_control = + SOC_DAPM_ENUM("Ch4 Switch", ak5558_channel4_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel5_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel5_mux_control = + SOC_DAPM_ENUM("Ch5 Switch", ak5558_channel5_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel6_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel6_mux_control = + SOC_DAPM_ENUM("Ch6 Switch", ak5558_channel6_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel7_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel7_mux_control = + SOC_DAPM_ENUM("Ch7 Switch", ak5558_channel7_mux_enum); + +static SOC_ENUM_SINGLE_VIRT_DECL(ak5558_channel8_mux_enum, + ak5558_channel_select_texts); + +static const struct snd_kcontrol_new ak5558_channel8_mux_control = + SOC_DAPM_ENUM("Ch8 Switch", ak5558_channel8_mux_enum); + +static const struct snd_soc_dapm_widget ak5558_dapm_widgets[] = { + /* Analog Input */ + SND_SOC_DAPM_INPUT("AIN1"), + SND_SOC_DAPM_INPUT("AIN2"), + SND_SOC_DAPM_INPUT("AIN3"), + SND_SOC_DAPM_INPUT("AIN4"), + SND_SOC_DAPM_INPUT("AIN5"), + SND_SOC_DAPM_INPUT("AIN6"), + SND_SOC_DAPM_INPUT("AIN7"), + SND_SOC_DAPM_INPUT("AIN8"), + + SND_SOC_DAPM_MUX("AK5558 Ch1 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel1_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch2 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel2_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch3 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel3_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch4 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel4_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch5 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel5_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch6 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel6_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch7 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel7_mux_control), + SND_SOC_DAPM_MUX("AK5558 Ch8 Enable", SND_SOC_NOPM, 0, 0, + &ak5558_channel8_mux_control), + + SND_SOC_DAPM_ADC("ADC Ch1", NULL, AK5558_00_POWER_MANAGEMENT1, 0, 0), + SND_SOC_DAPM_ADC("ADC Ch2", NULL, AK5558_00_POWER_MANAGEMENT1, 1, 0), + SND_SOC_DAPM_ADC("ADC Ch3", NULL, AK5558_00_POWER_MANAGEMENT1, 2, 0), + SND_SOC_DAPM_ADC("ADC Ch4", NULL, AK5558_00_POWER_MANAGEMENT1, 3, 0), + SND_SOC_DAPM_ADC("ADC Ch5", NULL, AK5558_00_POWER_MANAGEMENT1, 4, 0), + SND_SOC_DAPM_ADC("ADC Ch6", NULL, AK5558_00_POWER_MANAGEMENT1, 5, 0), + SND_SOC_DAPM_ADC("ADC Ch7", NULL, AK5558_00_POWER_MANAGEMENT1, 6, 0), + SND_SOC_DAPM_ADC("ADC Ch8", NULL, AK5558_00_POWER_MANAGEMENT1, 7, 0), + + SND_SOC_DAPM_AIF_OUT("SDTO", "Capture", 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route ak5558_intercon[] = { + {"AK5558 Ch1 Enable", "On", "AIN1"}, + {"ADC Ch1", NULL, "AK5558 Ch1 Enable"}, + {"SDTO", NULL, "ADC Ch1"}, + + {"AK5558 Ch2 Enable", "On", "AIN2"}, + {"ADC Ch2", NULL, "AK5558 Ch2 Enable"}, + {"SDTO", NULL, "ADC Ch2"}, + + {"AK5558 Ch3 Enable", "On", "AIN3"}, + {"ADC Ch3", NULL, "AK5558 Ch3 Enable"}, + {"SDTO", NULL, "ADC Ch3"}, + + {"AK5558 Ch4 Enable", "On", "AIN4"}, + {"ADC Ch4", NULL, "AK5558 Ch4 Enable"}, + {"SDTO", NULL, "ADC Ch4"}, + + {"AK5558 Ch5 Enable", "On", "AIN5"}, + {"ADC Ch5", NULL, "AK5558 Ch5 Enable"}, + {"SDTO", NULL, "ADC Ch5"}, + + {"AK5558 Ch6 Enable", "On", "AIN6"}, + {"ADC Ch6", NULL, "AK5558 Ch6 Enable"}, + {"SDTO", NULL, "ADC Ch6"}, + + {"AK5558 Ch7 Enable", "On", "AIN7"}, + {"ADC Ch7", NULL, "AK5558 Ch7 Enable"}, + {"SDTO", NULL, "ADC Ch7"}, + + {"AK5558 Ch8 Enable", "On", "AIN8"}, + {"ADC Ch8", NULL, "AK5558 Ch8 Enable"}, + {"SDTO", NULL, "ADC Ch8"}, +}; + +static int ak5558_set_mcki(struct snd_soc_codec *codec, int fs, int rclk) +{ + u8 mode; +#ifndef AK5558_SLAVE_CKS_AUTO + int mcki_rate; +#endif + + dev_dbg(codec->dev, "%s fs=%d rclk=%d\n", __func__, fs, rclk); + + mode = snd_soc_read(codec, AK5558_02_CONTROL1); + mode &= ~AK5558_CKS; + +#ifdef AK5558_SLAVE_CKS_AUTO + mode |= AK5558_CKS_AUTO; +#else + if (fs != 0 && rclk != 0) { + if (rclk % fs) + return -EINVAL; + mcki_rate = rclk / fs; + + if (fs > 400000) { + switch (mcki_rate) { + case 32: + mode |= AK5558_CKS_32FS_768KHZ; + break; + case 48: + mode |= AK5558_CKS_48FS_768KHZ; + break; + case 64: + mode |= AK5558_CKS_64FS_768KHZ; + break; + default: + return -EINVAL; + } + } else if (fs > 200000) { + switch (mcki_rate) { + case 64: + mode |= AK5558_CKS_64FS_384KHZ; + break; + case 96: + mode |= AK5558_CKS_96FS_384KHZ; + break; + default: + return -EINVAL; + } + } else if (fs > 108000) { + switch (mcki_rate) { + case 128: + mode |= AK5558_CKS_128FS_192KHZ; + break; + case 192: + mode |= AK5558_CKS_192FS_192KHZ; + break; + default: + return -EINVAL; + } + } else if (fs > 54000) { + switch (mcki_rate) { + case 256: + mode |= AK5558_CKS_256FS_96KHZ; + break; + case 384: + mode |= AK5558_CKS_384FS_96KHZ; + break; + default: + return -EINVAL; + } + } else { + switch (mcki_rate) { + case 256: + mode |= AK5558_CKS_256FS_48KHZ; + break; + case 384: + mode |= AK5558_CKS_384FS_48KHZ; + break; + case 512: + mode |= AK5558_CKS_512FS_48KHZ; + break; + case 768: + mode |= AK5558_CKS_768FS_48KHZ; + break; + case 1024: + if (fs > 32000) + return -EINVAL; + mode |= AK5558_CKS_1024FS_16KHZ; + break; + default: + return -EINVAL; + } + } + } +#endif + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, mode); + + return 0; +} + +static int ak5558_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + u8 bits; + int pcm_width = max(params_physical_width(params), ak5558->slot_width); + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__); + + /* set master/slave audio interface */ + bits = snd_soc_read(codec, AK5558_02_CONTROL1); + bits &= ~AK5558_BITS; + + switch (pcm_width) { + case 16: + bits |= AK5558_DIF_24BIT_MODE; + break; + case 32: + bits |= AK5558_DIF_32BIT_MODE; + break; + default: + return -EINVAL; + } + + ak5558->fs = params_rate(params); + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_BITS, bits); + + ak5558_set_mcki(codec, ak5558->fs, ak5558->rclk); + + return 0; +} + +static int ak5558_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, + unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__); + + ak5558->rclk = freq; + ak5558_set_mcki(codec, ak5558->fs, ak5558->rclk); + + return 0; +} + +static int ak5558_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt) +{ + struct snd_soc_codec *codec = dai->codec; + u8 format; + + dev_dbg(dai->dev, "%s(%d)\n", __func__, __LINE__); + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: +#ifdef AK5558_SLAVE_CKS_AUTO + break; +#else + return -EINVAL; +#endif + case SND_SOC_DAIFMT_CBS_CFM: + case SND_SOC_DAIFMT_CBM_CFS: + default: + dev_err(codec->dev, "Clock mode unsupported"); + return -EINVAL; + } + + /* set master/slave audio interface */ + format = snd_soc_read(codec, AK5558_02_CONTROL1); + format &= ~AK5558_DIF; + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format |= AK5558_DIF_I2S_MODE; + break; + case SND_SOC_DAIFMT_LEFT_J: + format |= AK5558_DIF_MSB_MODE; + break; + case SND_SOC_DAIFMT_DSP_B: + format |= AK5558_DIF_MSB_MODE; + break; + default: + return -EINVAL; + } + + snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_DIF, format); + + return 0; +} + +static int ak5558_set_dai_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int ndt; + + if (mute) { + ndt = 0; + if (ak5558->fs != 0) + ndt = 583000 / ak5558->fs; + if (ndt < 5) + ndt = 5; + msleep(ndt); + } + + return 0; +} + +static int ak5558_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + dev_dbg(codec->dev, "%s bias level=%d\n", __func__, (int)level); + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + case SND_SOC_BIAS_STANDBY: + break; + case SND_SOC_BIAS_OFF: + snd_soc_write(codec, AK5558_00_POWER_MANAGEMENT1, 0x00); + break; + } + return 0; +} + +static int ak5558_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask, + unsigned int rx_mask, int slots, + int slot_width) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int tdm_mode = 0; + int reg; + + ak5558->slots = slots; + ak5558->slot_width = slot_width; + + switch (slots * slot_width) { + case 128: + tdm_mode = AK5558_MODE_TDM128; + break; + case 256: + tdm_mode = AK5558_MODE_TDM256; + break; + case 512: + tdm_mode = AK5558_MODE_TDM512; + break; + default: + tdm_mode = AK5558_MODE_NORMAL; + break; + } + + reg = snd_soc_read(codec, AK5558_03_CONTROL2); + reg &= ~AK5558_MODE_BITS; + reg |= tdm_mode; + snd_soc_write(codec, AK5558_03_CONTROL2, reg); + + return 0; +} + +#define AK5558_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) + +static const unsigned int ak5558_rates[] = { + 8000, 11025, 16000, 22050, + 32000, 44100, 48000, 88200, + 96000, 176400, 192000, 352800, + 384000, 705600, 768000, 1411200, + 2822400, +}; + +static const struct snd_pcm_hw_constraint_list ak5558_rate_constraints = { + .count = ARRAY_SIZE(ak5558_rates), + .list = ak5558_rates, +}; + +static int ak5558_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + int ret; + + ret = snd_pcm_hw_constraint_list(substream->runtime, 0, + SNDRV_PCM_HW_PARAM_RATE, + &ak5558_rate_constraints); + return ret; +} + +static struct snd_soc_dai_ops ak5558_dai_ops = { + .startup = ak5558_startup, + .hw_params = ak5558_hw_params, + .set_sysclk = ak5558_set_dai_sysclk, + .set_fmt = ak5558_set_dai_fmt, + .digital_mute = ak5558_set_dai_mute, + .set_tdm_slot = ak5558_set_tdm_slot, +}; + +static struct snd_soc_dai_driver ak5558_dai = { + .name = "ak5558-aif", + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 8, + .rates = SNDRV_PCM_RATE_KNOT, + .formats = AK5558_FORMATS, + }, + .ops = &ak5558_dai_ops, +}; + +static int ak5558_init_reg(struct snd_soc_codec *codec) +{ + int ret; + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__); + + usleep_range(10000, 11000); + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + gpio_set_value_cansleep(ak5558->pdn_gpio, 1); + usleep_range(1000, 2000); + } + + ret = snd_soc_write(codec, AK5558_00_POWER_MANAGEMENT1, 0x0); + if (ret < 0) + return ret; + + ret = snd_soc_update_bits(codec, AK5558_02_CONTROL1, AK5558_CKS, + AK5558_CKS_AUTO); + if (ret < 0) + return ret; + + return 0; +} + +static int ak5558_probe(struct snd_soc_codec *codec) +{ + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + int ret = 0; + + dev_dbg(codec->dev, "%s(%d)\n", __func__, __LINE__); + + ret = ak5558_init_reg(codec); + + ak5558->fs = 48000; + ak5558->rclk = 0; + + return ret; +} + +static int ak5558_remove(struct snd_soc_codec *codec) +{ + struct ak5558_priv *ak5558 = snd_soc_codec_get_drvdata(codec); + + ak5558_set_bias_level(codec, SND_SOC_BIAS_OFF); + + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + } + + return 0; +} + +#ifdef CONFIG_PM +static int ak5558_runtime_suspend(struct device *dev) +{ + struct ak5558_priv *ak5558 = dev_get_drvdata(dev); + + regcache_cache_only(ak5558->regmap, true); + + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + } + + return 0; +} + +static int ak5558_runtime_resume(struct device *dev) +{ + struct ak5558_priv *ak5558 = dev_get_drvdata(dev); + + if (gpio_is_valid(ak5558->pdn_gpio)) { + gpio_set_value_cansleep(ak5558->pdn_gpio, 0); + usleep_range(1000, 2000); + gpio_set_value_cansleep(ak5558->pdn_gpio, 1); + usleep_range(1000, 2000); + } + + regcache_cache_only(ak5558->regmap, false); + regcache_mark_dirty(ak5558->regmap); + + return regcache_sync(ak5558->regmap); +} +#endif + +const struct dev_pm_ops ak5558_pm = { + SET_RUNTIME_PM_OPS(ak5558_runtime_suspend, ak5558_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) +}; + +struct snd_soc_codec_driver soc_codec_dev_ak5558 = { + .probe = ak5558_probe, + .remove = ak5558_remove, + .idle_bias_off = true, + .set_bias_level = ak5558_set_bias_level, + + .component_driver = { + .controls = ak5558_snd_controls, + .num_controls = ARRAY_SIZE(ak5558_snd_controls), + .dapm_widgets = ak5558_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(ak5558_dapm_widgets), + .dapm_routes = ak5558_intercon, + .num_dapm_routes = ARRAY_SIZE(ak5558_intercon), + }, +}; + +static const struct regmap_config ak5558_regmap = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = AK5558_05_DSD, + .reg_defaults = ak5558_reg, + .num_reg_defaults = ARRAY_SIZE(ak5558_reg), + .cache_type = REGCACHE_RBTREE, +}; + +static int ak5558_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c->dev.of_node; + struct ak5558_priv *ak5558; + int ret = 0; + + dev_err(&i2c->dev, "%s(%d)\n", __func__, __LINE__); + + ak5558 = devm_kzalloc(&i2c->dev, sizeof(struct ak5558_priv), + GFP_KERNEL); + if (!ak5558) + return -ENOMEM; + + ak5558->regmap = devm_regmap_init_i2c(i2c, &ak5558_regmap); + if (IS_ERR(ak5558->regmap)) + return PTR_ERR(ak5558->regmap); + + i2c_set_clientdata(i2c, ak5558); + ak5558->i2c = i2c; + + ak5558->pdn_gpio = of_get_named_gpio(np, "ak5558,pdn-gpio", 0); + if (gpio_is_valid(ak5558->pdn_gpio)) { + ret = devm_gpio_request_one(&i2c->dev, ak5558->pdn_gpio, + GPIOF_OUT_INIT_LOW, "ak5558,pdn"); + if (ret) { + dev_err(&i2c->dev, "unable to get pdn gpio\n"); + return ret; + } + } + + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_ak5558, + &ak5558_dai, 1); + if (ret) + return ret; + + pm_runtime_enable(&i2c->dev); + + return 0; +} + +static int ak5558_i2c_remove(struct i2c_client *client) +{ + snd_soc_unregister_codec(&client->dev); + pm_runtime_disable(&client->dev); + + return 0; +} + +static const struct of_device_id ak5558_i2c_dt_ids[] = { + { .compatible = "asahi-kasei,ak5558"}, + { } +}; + +static const struct i2c_device_id ak5558_i2c_id[] = { + { "ak5558", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ak5558_i2c_id); + +static struct i2c_driver ak5558_i2c_driver = { + .driver = { + .name = "ak5558", + .of_match_table = of_match_ptr(ak5558_i2c_dt_ids), + .pm = &ak5558_pm, + }, + .probe = ak5558_i2c_probe, + .remove = ak5558_i2c_remove, + .id_table = ak5558_i2c_id, +}; + +module_i2c_driver(ak5558_i2c_driver); + +MODULE_AUTHOR("Junichi Wakasugi <wakasugi.jb(a)om.asahi-kasei.co.jp>"); +MODULE_AUTHOR("Mihai Serban <mihai.serban(a)nxp.com>"); +MODULE_DESCRIPTION("ASoC AK5558 ADC driver"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/ak5558.h b/sound/soc/codecs/ak5558.h new file mode 100644 index 0000000..0e40c4a --- /dev/null +++ b/sound/soc/codecs/ak5558.h @@ -0,0 +1,60 @@ +/* + * ak5558.h -- audio driver for AK5558 + * + * Copyright (C) 2016 Asahi Kasei Microdevices Corporation + * Copyright 2018 NXP + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _AK5558_H +#define _AK5558_H + +#define AK5558_00_POWER_MANAGEMENT1 0x00 +#define AK5558_01_POWER_MANAGEMENT2 0x01 +#define AK5558_02_CONTROL1 0x02 +#define AK5558_03_CONTROL2 0x03 +#define AK5558_04_CONTROL3 0x04 +#define AK5558_05_DSD 0x05 + +/* AK5558_02_CONTROL1 fields */ +#define AK5558_DIF 0x02 +#define AK5558_DIF_MSB_MODE (0 << 1) +#define AK5558_DIF_I2S_MODE (1 << 1) + +#define AK5558_BITS 0x04 +#define AK5558_DIF_24BIT_MODE (0 << 2) +#define AK5558_DIF_32BIT_MODE (1 << 2) + +#define AK5558_CKS 0x78 +#define AK5558_CKS_128FS_192KHZ (0 << 3) +#define AK5558_CKS_192FS_192KHZ (1 << 3) +#define AK5558_CKS_256FS_48KHZ (2 << 3) +#define AK5558_CKS_256FS_96KHZ (3 << 3) +#define AK5558_CKS_384FS_96KHZ (4 << 3) +#define AK5558_CKS_384FS_48KHZ (5 << 3) +#define AK5558_CKS_512FS_48KHZ (6 << 3) +#define AK5558_CKS_768FS_48KHZ (7 << 3) +#define AK5558_CKS_64FS_384KHZ (8 << 3) +#define AK5558_CKS_32FS_768KHZ (9 << 3) +#define AK5558_CKS_96FS_384KHZ (10 << 3) +#define AK5558_CKS_48FS_768KHZ (11 << 3) +#define AK5558_CKS_64FS_768KHZ (12 << 3) +#define AK5558_CKS_1024FS_16KHZ (13 << 3) +#define AK5558_CKS_AUTO (15 << 3) + +/* AK5558_03_CONTROL2 fields */ +#define AK5558_MODE_BITS 0x60 +#define AK5558_MODE_NORMAL (0 << 5) +#define AK5558_MODE_TDM128 (1 << 5) +#define AK5558_MODE_TDM256 (2 << 5) +#define AK5558_MODE_TDM512 (3 << 5) + +#endif -- 2.7.4

4 10

[alsa-devel] [GIT PULL]: kbl audio firmware update
by Vinod Koul 01 Feb '18

01 Feb '18

Hi, Please PULL to receive the update for KBL audio DSP firmware. The following changes since commit 2a713be25a44bd6cec90d8affc54b246a2ca9c7b: amdgpu: update uvd firmware for polaris asics (2018-01-19 07:16:32 -0500) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/firmware.git kbl for you to fetch changes up to aab8b6fff9417a9938f6393dc09cf6ce90e55565: linux-firmware: intel: Update Kabylake audio firmware (2018-01-30 15:42:45 +0530) ---------------------------------------------------------------- Guneshwor Singh (1): linux-firmware: intel: Update Kabylake audio firmware WHENCE | 4 +++- intel/dsp_fw_kbl.bin | 2 +- intel/dsp_fw_kbl_v3266.bin | Bin 0 -> 243016 bytes 3 files changed, 4 insertions(+), 2 deletions(-) create mode 100644 intel/dsp_fw_kbl_v3266.bin Thanks -- ~Vinod

2 1

[alsa-devel] [PATCH 1/2] cplay: fix size and nmemb of mp3 header of fread
by Katsuhiro Suzuki 01 Feb '18

01 Feb '18

This patch swaps 'size' and 'nmemb' arguments of fread. The fread returns always 1 (because 'nmemb' is 1) so checking the return value is always failure. Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro(a)socionext.com> --- src/utils/cplay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/src/utils/cplay.c b/src/utils/cplay.c index e0603fd..bc95f0d 100644 --- a/src/utils/cplay.c +++ b/src/utils/cplay.c @@ -220,7 +220,7 @@ void play_samples(char *name, unsigned int card, unsigned int device, exit(EXIT_FAILURE); } - read = fread(&header, sizeof(header), 1, file); + read = fread(&header, 1, sizeof(header), file); if (read != sizeof(header)) { fprintf(stderr, "Unable to read header \n"); fclose(file); -- 2.15.0

2 3

[alsa-devel] [PATCH v6 0/6] TDA1997x HDMI video receiver
by Tim Harvey 01 Feb '18

01 Feb '18

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q/IMX6DL which uses the TDA19971 with 16bits connected to the IMX6 CSI and single-lane I2S audio providing 2-channel audio. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - mbus format selection support for bus widths that support multiple formats - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media History: v6: - tda1997x: fix return on regulator enablei in tda1997x_set_power() (Fabio) - tda1997x: fix colorspace handling (Hans) - bindings: added Robs's ack (Rob) - replace copyright with SPDX tag (Philippe) v5: - added v4l2_hdmi_colorimetry() patch from Hans to series - bindings: added Sakari's ack - tda1997x: uppercase string constants - tda1997x: use v4l2_hdmi_rx_coloriemtry to fill format - tda1997x: fix V4L2_CID_DV_RX_RGB_RANGE - tda1997x: fix interlaced mode format - dts: remove leading 0 from unit address - dts: add newline between property list and child node - dts: added missing audmux in GW551x dts v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC Media device topology: # media-ctl -d /dev/media0 -p Media controller API version 4.13.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.13.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x480@13000000 max:1920x1080@165000000 stds:CEA-861,DMT caps:progressive] [dv.detect:BT.656/1120 640x480p59 (800x525) stds:CEA-861,DMT flags:has-cea861-vic] [dv.current:BT.656/1120 1920x1080p60 (2200x1125) stds:CEA-861,DMT flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu1_csi0_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "tda19971 2-0048":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu1_csi0":0 [] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: (on /dev/video6 as v4l2-compliance doesn't yet support subdevs) Driver Info: Driver name : imx-media-captu Card type : imx-media-capture Bus info : platform:ipu2_csi0 Driver version: 4.13.0 Capabilities : 0x84200001 Video Capture Streaming Extended Pix Format Device Capabilities Device Caps : 0x04200001 Video Capture Streaming Extended Pix Format Compliance test for device /dev/video6 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) fail: v4l2-test-input-output.cpp(418): G_INPUT not supported for a capture device test VIDIOC_G/S/ENUMINPUT: FAIL test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK fail: v4l2-test-controls.cpp(574): g_ext_ctrls does not support count == 0 test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Total: 42, Succeeded: 40, Failed: 2, Warnings: 0 Hans Verkuil (1): v4l2-dv-timings: add v4l2_hdmi_colorimetry() Tim Harvey (5): MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 105 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 3476 ++++++++++++++++++++ drivers/media/v4l2-core/v4l2-dv-timings.c | 141 + include/dt-bindings/media/tda1997x.h | 74 + include/media/i2c/tda1997x.h | 41 + include/media/v4l2-dv-timings.h | 21 + 12 files changed, 4219 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

2 14

[alsa-devel] [PATCH - alsa-lib 1/1] Patch for two bugs in snd_pcm_area_silence().
by alsa2＠bushytails.net 01 Feb '18

01 Feb '18

From: furrywolf <alsa2(a)bushytails.net> First, after silencing the buffer 64 bits at a time, any remaining samples need to be silenced by the following width-specific code. However, instead of silencing the end of the buffer, the code instead re-silences the start of the buffer, leaving the end unsilenced. To fix this, update the pointer used by the width-specific code to point to the end of the area just silenced, instead of leaving it pointing to the start of the buffer. Second, the code for 24 bit samples can only silence a single sample, as there's no loop for multiple samples as with other formats. To fix this, add a loop similar to the ones used for every other width. The symptoms of these bugs are random data at the end of every supposedly silenced buffer with certain format/buffer size combinations, resulting in pops and noise. Signed-off-by: furrywolf <alsa2(a)bushytails.net> diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 69d7d66..1753cda 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -2955,6 +2955,7 @@ int snd_pcm_area_silence(const snd_pcm_channel_area_t *dst_area, snd_pcm_uframes *dstp++ = silence; if (samples == 0) return 0; + dst = (char *)dstp; } dst_step = dst_area->step / 8; switch (width) { @@ -2996,16 +2997,20 @@ int snd_pcm_area_silence(const snd_pcm_channel_area_t *dst_area, snd_pcm_uframes } break; } - case 24: + case 24: { + while (samples-- > 0) { #ifdef SNDRV_LITTLE_ENDIAN - *(dst + 0) = silence >> 0; - *(dst + 1) = silence >> 8; - *(dst + 2) = silence >> 16; + *(dst + 0) = silence >> 0; + *(dst + 1) = silence >> 8; + *(dst + 2) = silence >> 16; #else - *(dst + 2) = silence >> 0; - *(dst + 1) = silence >> 8; - *(dst + 0) = silence >> 16; + *(dst + 2) = silence >> 0; + *(dst + 1) = silence >> 8; + *(dst + 0) = silence >> 16; #endif + dst += dst_step; + } + } break; case 32: { uint32_t sil = silence; -- 1.7.10.4

2 2

Re: [alsa-devel] [PATCH] sound/tlv320dac33: Add device tree support
by Ladislav Michl 31 Jan '18

31 Jan '18

On Tue, Jan 30, 2018 at 10:11:02AM +0100, Filip Matijević wrote: > Hi, > > On 01/30/2018 09:53 AM, Pavel Machek wrote: > > On Tue 2018-01-30 09:34:46, Ladislav Michl wrote: > >> On Tue, Jan 30, 2018 at 12:33:01AM +0100, Pavel Machek wrote: > >>> On Tue 2018-01-30 00:20:31, Ladislav Michl wrote: > >>>> On Tue, Jan 30, 2018 at 12:05:39AM +0100, Pavel Machek wrote: > >>>>> > >>>>> This adds device tree support to tlv320dac33.c. > >>>>> > >>>>> Signed-off-by: Pavel Machek <pavel(a)ucw.cz> > >>>>> > >>>>> diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > >>>>> new file mode 100644 > >>>>> index 0000000..6cbd311 > >>>>> --- /dev/null > >>>>> +++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt > >>>>> @@ -0,0 +1,32 @@ > >>>>> +Texas Instruments - tlv320dac33 Codec module > >>>>> + > >>>>> +The tlv320dac33 serial control bus communicates through I2C protocols. > >>>>> + > >>>>> +Required properties: > >>>>> + > >>>>> +- compatible - "ti,tlv320dac33" > >>>>> +- reg - I2C slave address > >>>>> + > >>>>> +Optional properties: > >>>>> + > >>>>> +- power-gpios - gpio pin to power the device, active high > >>>> > >>>> While driver used gpio in platform data, isn't it more likely > >>>> regulator which powers device? > >>> > >>> power-gpios = <&gpio2 28 0>; /* gpio_60 */ > >>> > >>> Looks like GPIO to me -- example is from Nokia N9. So this appears to > >>> be correct. > >> > >> Device datasheet doesn't list any pin which looks like "power-gpio" > >> http://www.ti.com/lit/ds/symlink/tlv320dac32.pdf > >> Unfortunately I do not know much about N9, but was able to find Nokia 5610 > >> scheme to get clue how could be tlv320dac33 hardwired (see page 2): > >> http://mastermobile.spb.ru/service/nokia_5610_rm-242_service_schematics.pdf > >> Here AVDD is powered by LP3985 voltage regulator which is enabled using > >> VEN pin which might be connected to gpio. Or there could be completely > >> different voltage regulator with different controls. And since Linux > >> already has voltage regulator class, lets not limit ourselves to gpio > >> pins. > > > > Well, notice I'm converting existing driver to device tree. And that > > one already has GPIO dependency. It is possible that more work needs > > to be done there, but that should not be a reason to delay this. Feel > > free to help. Adding DT properties that need to be maintained for compatibility reasons is a bad idea and very good reason to delay merging unfinished stuff. And meanwhile it turned out it is not power-gpio :) > According to N9 schematics > http://www.s-manuals.com/manuals/phone/nokia/nokia_n9_rm-696_service_schema… > it's in fact GPIO pin that is connected to reset line (labeled > CODEC_RST). So calling it "power" might be misleading, but the driver > code is quite clear as it labels that GPIO as "tlv320dac33 reset" Thanks a lot! So now it is clear that gpio is connected to codec's nRESET pin, therefore "reset-gpios" property seems reasonable here. ladis

3 5

[alsa-devel] [alsa-lib] [PATCH] pcm: add set and get methods for no-rewind flag
by Sriram Periyasamy 31 Jan '18

31 Jan '18

From: Ramesh Babu <ramesh.babu(a)intel.com> Add functions to set/get no-rewind flag Signed-off-by: Ramesh Babu <ramesh.babu(a)intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy(a)intel.com> --- include/pcm.h | 2 ++ include/sound/asound.h | 1 + src/pcm/pcm.c | 40 ++++++++++++++++++++++++++++++++++++++++ src/pcm/pcm_local.h | 1 + 4 files changed, 44 insertions(+) diff --git a/include/pcm.h b/include/pcm.h index 2619c8cd8bd4..8c0b19c106b0 100644 --- a/include/pcm.h +++ b/include/pcm.h @@ -805,6 +805,8 @@ int snd_pcm_hw_params_set_export_buffer(snd_pcm_t *pcm, snd_pcm_hw_params_t *par int snd_pcm_hw_params_get_export_buffer(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int *val); int snd_pcm_hw_params_set_period_wakeup(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int val); int snd_pcm_hw_params_get_period_wakeup(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int *val); +int snd_pcm_hw_params_set_no_rewind(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int val); +int snd_pcm_hw_params_get_no_rewind(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int *val); int snd_pcm_hw_params_get_period_time(const snd_pcm_hw_params_t *params, unsigned int *val, int *dir); int snd_pcm_hw_params_get_period_time_min(const snd_pcm_hw_params_t *params, unsigned int *val, int *dir); diff --git a/include/sound/asound.h b/include/sound/asound.h index 6041cab27a23..35fd50ec5395 100644 --- a/include/sound/asound.h +++ b/include/sound/asound.h @@ -375,6 +375,7 @@ typedef int snd_pcm_hw_param_t; #define SNDRV_PCM_HW_PARAMS_NORESAMPLE (1<<0) /* avoid rate resampling */ #define SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER (1<<1) /* export buffer */ #define SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP (1<<2) /* disable period wakeups */ +#define SNDRV_PCM_HW_PARAMS_NO_REWINDS (1<<3) /* disable rewinds */ struct snd_interval { unsigned int min, max; diff --git a/src/pcm/pcm.c b/src/pcm/pcm.c index 69d7d66500ea..c7041be47be6 100644 --- a/src/pcm/pcm.c +++ b/src/pcm/pcm.c @@ -4763,6 +4763,46 @@ int snd_pcm_hw_params_get_period_wakeup(snd_pcm_t *pcm, snd_pcm_hw_params_t *par } /** + * \brief Configure no-rewind flag through configuration space + * \param pcm PCM handle + * \param params Configuration space + * \param val 0 = disable (default), 1 = enable (default) no-rewind flag + * \return Zero on success, otherwise a negative error code. + * + * This function can be called to inform driver about application uses rewind or not + * + * Based on no-rewind flag, underlying driver could take decision on buffering scheme. + */ + +/* TODO: Invert the logic with function name set_rewind */ +int snd_pcm_hw_params_set_no_rewind(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int val) +{ + assert(pcm && params); + + if (val) { + params->flags |= SND_PCM_HW_PARAMS_NO_REWINDS; + } else + params->flags &= ~SND_PCM_HW_PARAMS_NO_REWINDS; + params->rmask = ~0; + + return snd_pcm_hw_refine(pcm, params); +} + +/** + * \brief Extract no-rewind flag from a configuration space + * \param pcm PCM handle + * \param params Configuration space + * \param val 0 = disabled, 1 = enabled no-rewind flag + * \return Zero on success, otherwise a negative error code. + */ +int snd_pcm_hw_params_get_no_rewind(snd_pcm_t *pcm, snd_pcm_hw_params_t *params, unsigned int *val) +{ + assert(pcm && params && val); + *val = params->flags & SND_PCM_HW_PARAMS_NO_REWINDS ? 0 : 1; + return 0; +} + +/** * \brief Extract period time from a configuration space * \param params Configuration space * \param val Returned approximate period duration in us diff --git a/src/pcm/pcm_local.h b/src/pcm/pcm_local.h index 3d95e1749169..91479cabff88 100644 --- a/src/pcm/pcm_local.h +++ b/src/pcm/pcm_local.h @@ -103,6 +103,7 @@ #define SND_PCM_HW_PARAMS_NORESAMPLE SNDRV_PCM_HW_PARAMS_NORESAMPLE #define SND_PCM_HW_PARAMS_EXPORT_BUFFER SNDRV_PCM_HW_PARAMS_EXPORT_BUFFER #define SND_PCM_HW_PARAMS_NO_PERIOD_WAKEUP SNDRV_PCM_HW_PARAMS_NO_PERIOD_WAKEUP +#define SND_PCM_HW_PARAMS_NO_REWINDS SNDRV_PCM_HW_PARAMS_NO_REWINDS #define SND_PCM_INFO_MONOTONIC 0x80000000 -- 2.7.4

3 2

[alsa-devel] [PATCH] iio: adc: STM32_DFSDM_ADC should depend on HAS_DMA
by Geert Uytterhoeven 30 Jan '18

30 Jan '18

If NO_DMA=y: ERROR: "bad_dma_ops" [drivers/iio/adc/stm32-dfsdm-adc.ko] undefined! Add a dependency on HAS_DMA to fix this. Fixes: e2e6771c64625165 ("IIO: ADC: add STM32 DFSDM sigma delta ADC support") Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- drivers/iio/adc/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 39e3b345a6c84033..d976c64107c8e9fd 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -683,6 +683,7 @@ config STM32_DFSDM_CORE config STM32_DFSDM_ADC tristate "STMicroelectronics STM32 dfsdm adc" depends on (ARCH_STM32 && OF) || COMPILE_TEST + depends on HAS_DMA select STM32_DFSDM_CORE select REGMAP_MMIO select IIO_BUFFER_HW_CONSUMER -- 2.7.4

2 3