June 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: rsnd: merge snd_pcm_ops::open and snd_soc_dai_ops::startup
by Kuninori Morimoto 28 Jul '17

28 Jul '17

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Current rsnd driver has snd_pcm_ops::open and snd_soc_dai_ops::startup, but, these are called from soc_pcm_open in same time. This patch merge these into rsnd_soc_dai_startup() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/sh/rcar/core.c | 80 +++++++++++++++++++----------------------------- 1 file changed, 31 insertions(+), 49 deletions(-) diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index 8dcf1a8..6fbbcbf 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -844,12 +844,28 @@ static int rsnd_soc_hw_rule_channels(struct snd_pcm_hw_params *params, ir, &ic); } -static void rsnd_soc_hw_constraint(struct snd_pcm_runtime *runtime, - struct snd_soc_dai *dai) +static struct snd_pcm_hardware rsnd_pcm_hardware = { + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID, + .buffer_bytes_max = 64 * 1024, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 1, + .periods_max = 32, + .fifo_size = 256, +}; + +static int rsnd_soc_dai_startup(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) { struct rsnd_dai *rdai = rsnd_dai_to_rdai(dai); + struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai); + struct rsnd_dai_stream *io = rsnd_rdai_to_io(rdai, substream); struct snd_pcm_hw_constraint_list *constraint = &rdai->constraint; + struct snd_pcm_runtime *runtime = substream->runtime; unsigned int max_channels = rsnd_rdai_channels_get(rdai); + int ret; int i; /* @@ -866,34 +882,26 @@ static void rsnd_soc_hw_constraint(struct snd_pcm_runtime *runtime, constraint->count = i + 1; } + snd_soc_set_runtime_hwparams(substream, &rsnd_pcm_hardware); + snd_pcm_hw_constraint_list(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, constraint); + snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + /* * Sampling Rate / Channel Limitation * It depends on Clock Master Mode */ - if (!rsnd_rdai_is_clk_master(rdai)) - return; - - snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, - rsnd_soc_hw_rule_rate, dai, - SNDRV_PCM_HW_PARAM_CHANNELS, -1); - snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, - rsnd_soc_hw_rule_channels, dai, - SNDRV_PCM_HW_PARAM_RATE, -1); -} - -static int rsnd_soc_dai_startup(struct snd_pcm_substream *substream, - struct snd_soc_dai *dai) -{ - struct rsnd_dai *rdai = rsnd_dai_to_rdai(dai); - struct rsnd_priv *priv = rsnd_rdai_to_priv(rdai); - struct rsnd_dai_stream *io = rsnd_rdai_to_io(rdai, substream); - int ret; - - /* rsnd_io_to_runtime() is not yet enabled here */ - rsnd_soc_hw_constraint(substream->runtime, dai); + if (rsnd_rdai_is_clk_master(rdai)) { + snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_RATE, + rsnd_soc_hw_rule_rate, dai, + SNDRV_PCM_HW_PARAM_CHANNELS, -1); + snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_CHANNELS, + rsnd_soc_hw_rule_channels, dai, + SNDRV_PCM_HW_PARAM_RATE, -1); + } /* * call rsnd_dai_call without spinlock @@ -1105,31 +1113,6 @@ static int rsnd_dai_probe(struct rsnd_priv *priv) /* * pcm ops */ -static struct snd_pcm_hardware rsnd_pcm_hardware = { - .info = SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID, - .buffer_bytes_max = 64 * 1024, - .period_bytes_min = 32, - .period_bytes_max = 8192, - .periods_min = 1, - .periods_max = 32, - .fifo_size = 256, -}; - -static int rsnd_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &rsnd_pcm_hardware); - - ret = snd_pcm_hw_constraint_integer(runtime, - SNDRV_PCM_HW_PARAM_PERIODS); - - return ret; -} - static int rsnd_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *hw_params) { @@ -1159,7 +1142,6 @@ static snd_pcm_uframes_t rsnd_pointer(struct snd_pcm_substream *substream) } static struct snd_pcm_ops rsnd_pcm_ops = { - .open = rsnd_pcm_open, .ioctl = snd_pcm_lib_ioctl, .hw_params = rsnd_hw_params, .hw_free = snd_pcm_lib_free_pages, -- 1.9.1

2 1

[alsa-devel] [PATCH v3 00/17] Add support for Cirrus Logic CS47L35/L85/L90/L91 codecs
by Richard Fitzgerald 27 Jul '17

27 Jul '17

The Cirrus Logic CS47L35, CS47L85, CS47L90/91 codecs are complex audio SoC devices. In addition to the core audio capability they have onboard GPIO, regulators, DSPs and interrupt controller and a large register map space accessed over SPI or I2C. This family of codecs is based around common IP blocks and they are managed by a set of common drivers referred to as "Madera". Summary of main changes since V1: - Removed child DT nodes and of_compatibles to make the DT flat - Fixed review comments on irqchip driver - Used new field names for IRQ1_STATUS_33 register - Moved the gpio driver bindings into the main MFD binding doc - Some code improvements to the pinctrl driver Richard Fitzgerald (17): mfd: madera: Add register definitions for Cirrus Logic Madera codecs mfd: madera: Add DT bindings for Cirrus Logic Madera codecs mfd: madera: Add common support for Cirrus Logic Madera codecs mfd: madera: Register map tables for Cirrus Logic CS47L35 mfd: madera: Register map tables for Cirrus Logic CS47L85 mfd: madera: Register map tables for Cirrus Logic CS47L90/91 regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs irqchip: Add driver for Cirrus Logic Madera codecs pinctrl: madera: Add DT bindings for Cirrus Logic Madera codecs pinctrl: madera: Add driver for Cirrus Logic Madera codecs gpio: madera: Support Cirrus Logic Madera class codecs ASoC: madera: Add DT bindings for Cirrus Logic Madera codecs ASoC: madera: Add common support for Cirrus Logic Madera codecs ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35 ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85 ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90 Documentation/devicetree/bindings/mfd/madera.txt | 102 + .../bindings/pinctrl/cirrus,madera-pinctrl.txt | 99 + .../bindings/regulator/arizona-regulator.txt | 3 +- Documentation/devicetree/bindings/sound/madera.txt | 67 + MAINTAINERS | 23 + drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-madera.c | 196 + drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-madera.c | 301 + drivers/mfd/Kconfig | 46 + drivers/mfd/Makefile | 13 + drivers/mfd/cs47l35-tables.c | 1688 ++++ drivers/mfd/cs47l85-tables.c | 3169 +++++++ drivers/mfd/cs47l90-tables.c | 2830 +++++++ drivers/mfd/madera-core.c | 632 ++ drivers/mfd/madera-i2c.c | 131 + drivers/mfd/madera-spi.c | 132 + drivers/mfd/madera.h | 52 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cirrus/Kconfig | 15 + drivers/pinctrl/cirrus/Makefile | 11 + drivers/pinctrl/cirrus/pinctrl-cs47l35.c | 46 + drivers/pinctrl/cirrus/pinctrl-cs47l85.c | 60 + drivers/pinctrl/cirrus/pinctrl-cs47l90.c | 58 + drivers/pinctrl/cirrus/pinctrl-madera.c | 1074 +++ drivers/pinctrl/cirrus/pinctrl-madera.h | 40 + drivers/regulator/Kconfig | 15 +- drivers/regulator/arizona-ldo1.c | 82 +- drivers/regulator/arizona-micsupp.c | 71 +- include/dt-bindings/sound/madera.h | 27 + include/linux/irqchip/irq-madera-pdata.h | 23 + include/linux/irqchip/irq-madera.h | 96 + include/linux/mfd/madera/core.h | 180 + include/linux/mfd/madera/pdata.h | 61 + include/linux/mfd/madera/registers.h | 8832 ++++++++++++++++++++ include/sound/madera-pdata.h | 61 + sound/soc/codecs/Kconfig | 23 + sound/soc/codecs/Makefile | 8 + sound/soc/codecs/cs47l35.c | 1747 ++++ sound/soc/codecs/cs47l85.c | 2706 ++++++ sound/soc/codecs/cs47l90.c | 2645 ++++++ sound/soc/codecs/madera.c | 4430 ++++++++++ sound/soc/codecs/madera.h | 470 ++ 46 files changed, 32268 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/sound/madera.txt create mode 100644 drivers/gpio/gpio-madera.c create mode 100644 drivers/irqchip/irq-madera.c create mode 100644 drivers/mfd/cs47l35-tables.c create mode 100644 drivers/mfd/cs47l85-tables.c create mode 100644 drivers/mfd/cs47l90-tables.c create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 drivers/pinctrl/cirrus/Kconfig create mode 100644 drivers/pinctrl/cirrus/Makefile create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l35.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l85.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l90.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.h create mode 100644 include/dt-bindings/sound/madera.h create mode 100644 include/linux/irqchip/irq-madera-pdata.h create mode 100644 include/linux/irqchip/irq-madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h create mode 100644 include/linux/mfd/madera/registers.h create mode 100644 include/sound/madera-pdata.h create mode 100644 sound/soc/codecs/cs47l35.c create mode 100644 sound/soc/codecs/cs47l85.c create mode 100644 sound/soc/codecs/cs47l90.c create mode 100644 sound/soc/codecs/madera.c create mode 100644 sound/soc/codecs/madera.h -- 1.9.1

7 42

[alsa-devel] [PATCH v3 00/12] AC97 device/driver model revamp
by Robert Jarzmik 20 Jul '17

20 Jul '17

Hi Lars, Mark, Charles, Lee, This is a resend of the v2, with patch 1 added (forgotten in v2). Patch 12 was slightly modified after module unloading tests, and Dmitry acks were added. This serie has been stalled for almost one year, as I wasn't feeling that well lately. I'm quite better now, so let's get back to it. The following sentences is a what was already said in v2. As it's been so long since the last review, I basically withdrew all my former objections and took into account all remarks regardless of my own judgement. This is especially the case with Lars's review on the bus code, where I tried to address all his comments. For this next round, let's sum up what happened : - I rebased against latest Linus's tree => as Lars had made ports to regmap of several impacted wm97xx drivers, all the better for me. - ALSA: ac97: add an ac97 bus => this addresses Lars's comments => history : https://patchwork.kernel.org/patch/9398229/ => there is one remark which was left out, the drop of the table ac97_controller->codecs. The reason is that there are traversals required in the bus scan and controller removal, and the code is way simpler with a table, and the data structure very compact. - Input: wm97xx: split out touchscreen registering => Charles's comment taken into account => history: http://https://patchwork.kernel.org/patch/9398223/ Have a happy review. -- Robert Robert Jarzmik (12): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: arm: make pxa2xx-ac97-lib ac97 codec agnostic Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support ASoC: wm9713: add ac97 new bus support ASoC: wm9712: add ac97 new bus support ASoC: wm9705: add private structure ASoC: wm9705: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 252 ++++++++++----- drivers/mfd/Kconfig | 14 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 +++++++++++++++++ include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 118 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 85 ++++++ include/sound/ac97/regs.h | 262 ++++++++++++++++ include/sound/ac97_codec.h | 239 +-------------- include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 526 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 37 ++- sound/arm/pxa2xx-ac97.c | 35 ++- sound/soc/Kconfig | 4 + sound/soc/codecs/Kconfig | 9 +- sound/soc/codecs/wm9705.c | 59 ++-- sound/soc/codecs/wm9712.c | 37 ++- sound/soc/codecs/wm9713.c | 39 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 46 ++- 30 files changed, 1866 insertions(+), 414 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.11.0

4 22

[alsa-devel] [PATCH v3] ASoC: sgtl5000: add avc support
by Richard Leitner 20 Jul '17

20 Jul '17

The sgtl5000 features a automatic volume control block (AVC), which reduces loud signals and amplifies low level signals for easier listening. This patch adds support for this AVC block to the driver. Apart from the "AVC Switch" control which enables the block following controls for the configuration of AVC are added: + AVC Threshold Volume: threshold where audio is compressed when the measured level is above or expanded when below + AVC Max Gain Volume: maximum gain which can be applied when the measured audio level is below threshold + AVC Hard Limiter Switch: when enabled the signal is limited to the programmed threshold. + AVC Integrator Response: response time of the integrator The AVC block is enabled and configured using the DAP_AVC_CTRL and DAP_AVC_THRESHOLD registers. Following 2 checkpatch.pl strict checks are ignored because the indentation style is different for the struct snd_kcontrol_new definition: patch:145: CHECK: Alignment should match open parenthesis patch:148: CHECK: Alignment should match open parenthesis Signed-off-by: Richard Leitner <richard.leitner(a)skidata.com> --- CHANGES v3: - rename "AVC Enable Switch" to "AVC Switch" - add AVC configuration controls CHANGES v2: - added trailing "Switch" as covered in ControlNames.txt --- sound/soc/codecs/sgtl5000.c | 87 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 5a2702e..5d4b69f 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -74,6 +74,20 @@ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_DAP_AVC_DECAY, 0x0050 }, }; +/* AVC: Threshold dB -> register: pre-calculated values */ +static const u16 avc_thr_db2reg[97] = { + 0x5168, 0x488E, 0x40AA, 0x39A1, 0x335D, 0x2DC7, 0x28CC, 0x245D, 0x2068, + 0x1CE2, 0x19BE, 0x16F1, 0x1472, 0x1239, 0x103E, 0x0E7A, 0x0CE6, 0x0B7F, + 0x0A3F, 0x0922, 0x0824, 0x0741, 0x0677, 0x05C3, 0x0522, 0x0493, 0x0414, + 0x03A2, 0x033D, 0x02E3, 0x0293, 0x024B, 0x020B, 0x01D2, 0x019F, 0x0172, + 0x014A, 0x0126, 0x0106, 0x00E9, 0x00D0, 0x00B9, 0x00A5, 0x0093, 0x0083, + 0x0075, 0x0068, 0x005D, 0x0052, 0x0049, 0x0041, 0x003A, 0x0034, 0x002E, + 0x0029, 0x0025, 0x0021, 0x001D, 0x001A, 0x0017, 0x0014, 0x0012, 0x0010, + 0x000E, 0x000D, 0x000B, 0x000A, 0x0009, 0x0008, 0x0007, 0x0006, 0x0005, + 0x0005, 0x0004, 0x0004, 0x0003, 0x0003, 0x0002, 0x0002, 0x0002, 0x0002, + 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000}; + /* regulator supplies for sgtl5000, VDDD is an optional external supply */ enum sgtl5000_regulator_supplies { VDDA, @@ -382,6 +396,63 @@ static int dac_put_volsw(struct snd_kcontrol *kcontrol, return 0; } +/* + * custom function to get AVC threshold + * + * The threshold dB is calculated by rearranging the calculation from the + * avc_put_threshold function: register_value = 10^(dB/20) * 0.636 * 2^15 ==> + * dB = ( fls(register_value) - 14.347 ) * 6.02 + * + * As this calculation is expensive and the threshold dB values may not exeed + * 0 to 96 we use pre-calculated values. + */ +static int avc_get_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int db, i; + u16 reg = snd_soc_read(codec, SGTL5000_DAP_AVC_THRESHOLD); + + /* register value 0 => -96dB */ + if (!reg) { + ucontrol->value.integer.value[0] = 96; + ucontrol->value.integer.value[1] = 96; + return 0; + } + + /* get dB from register value (rounded down) */ + for (i = 0; avc_thr_db2reg[i] > reg; i++) + ; + db = i; + + ucontrol->value.integer.value[0] = db; + ucontrol->value.integer.value[1] = db; + + return 0; +} + +/* + * custom function to put AVC threshold + * + * The register value is calculated by following formula: + * register_value = 10^(dB/20) * 0.636 * 2^15 + * As this calculation is expensive and the threshold dB values may not exeed + * 0 to 96 we use pre-calculated values. + */ +static int avc_put_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int db; + u16 reg; + + db = clamp((int)ucontrol->value.integer.value[0], 0, 96); + reg = avc_thr_db2reg[db]; + snd_soc_write(codec, SGTL5000_DAP_AVC_THRESHOLD, reg); + + return 0; +} + static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); /* tlv for mic gain, 0db 20db 30db 40db */ @@ -396,6 +467,12 @@ static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0); /* tlv for lineout volume, 31 steps of .5db each */ static const DECLARE_TLV_DB_SCALE(lineout_volume, -1550, 50, 0); +/* tlv for dap avc max gain, 0db, 6db, 12db */ +static const DECLARE_TLV_DB_SCALE(avc_max_gain, 0, 600, 0); + +/* tlv for dap avc threshold, */ +static const DECLARE_TLV_DB_MINMAX(avc_threshold, 0, 9600); + static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { /* SOC_DOUBLE_S8_TLV with invert */ { @@ -434,6 +511,16 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { 0x1f, 1, lineout_volume), SOC_SINGLE("Lineout Playback Switch", SGTL5000_CHIP_ANA_CTRL, 8, 1, 1), + + /* Automatic Volume Control (DAP AVC) */ + SOC_SINGLE("AVC Switch", SGTL5000_DAP_AVC_CTRL, 0, 1, 0), + SOC_SINGLE("AVC Hard Limiter Switch", SGTL5000_DAP_AVC_CTRL, 5, 1, 0), + SOC_SINGLE_TLV("AVC Max Gain Volume", SGTL5000_DAP_AVC_CTRL, 12, 2, 0, + avc_max_gain), + SOC_SINGLE("AVC Integrator Response", SGTL5000_DAP_AVC_CTRL, 8, 3, 0), + SOC_SINGLE_EXT_TLV("AVC Threshold Volume", SGTL5000_DAP_AVC_THRESHOLD, + 0, 96, 0, avc_get_threshold, avc_put_threshold, + avc_threshold), }; /* mute the codec used by alsa core */ -- 2.1.4

3 6

[alsa-devel] Patch for Digidesign Mbox 2 (set sample rate)
by Viktor Radnai 19 Jul '17

19 Jul '17

Hi there, I have recently bought a Digidesign Mbox 2 Mini and found the lack of support for 44100Hz sample rate in the driver limiting (the sample rate was hard-set to 48000Hz by the original author even though the device supports it, because he couldn't get the frame rate switching to work reliably). I had a go at hacking the driver and came up with the following patch which appears to work on the MBox 2 Mini: https://pastebin.com/kzzTDj9T I have built and tested this with Linux 4.8.15 without any realtime patches. I am planning to pick up a "full size" Mbox 2 as well, in the meantime if anyone on the list owns one I would appreciate if you could test this and let me know the result. There is a possibility that it will not work without the "magic" init sequence that I have removed because it does not look like it's needed on the Mini. Although I would be a bit surprised because the two devices are apparently identical to the point that the Mini allows the use of it's physically nonexistent features. Once someone could confirm that this works, I would like to get it merged. This is my first attempt at submitting a patch for any Linux device driver so please let me know if I need to do anything else :) Cheers, Vik -- My other sig is hilarious

3 6

[alsa-devel] [PATCH] ASoC: sgtl5000: add AVC configuration controls
by Richard Leitner 18 Jul '17

18 Jul '17

For the configuration of the automatic volume control block (AVC), which reduces loud signals and amplifies low level signals for easier listening, following controls are added: + AVC Threshold Volume: threshold where audio is compressed when the measured level is above or expanded when below + AVC Max Gain Volume: maximum gain which can be applied when the measured audio level is below threshold + AVC Hard Limiter Switch: when enabled the signal is limited to the programmed threshold. + AVC Integrator Response These controls use the DAP_AVC_CTRL and DAP_AVC_THRESHOLD registers for configuration. This patch depends on "ASoC: sgtl5000: add avc enable control" Following 2 checkpatch.pl strict checks are ignored because the indentation style is different for the struct snd_kcontrol_new definition: patch:144: CHECK: Alignment should match open parenthesis patch:147: CHECK: Alignment should match open parenthesis Signed-off-by: Richard Leitner <richard.leitner(a)skidata.com> --- sound/soc/codecs/sgtl5000.c | 85 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index 0477f2e..2bb3235 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -74,6 +74,20 @@ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_DAP_AVC_DECAY, 0x0050 }, }; +/* AVC: Threshold dB -> register: pre-calculated values */ +static const u16 avc_thr_db2reg[97] = { + 0x5168, 0x488E, 0x40AA, 0x39A1, 0x335D, 0x2DC7, 0x28CC, 0x245D, 0x2068, + 0x1CE2, 0x19BE, 0x16F1, 0x1472, 0x1239, 0x103E, 0x0E7A, 0x0CE6, 0x0B7F, + 0x0A3F, 0x0922, 0x0824, 0x0741, 0x0677, 0x05C3, 0x0522, 0x0493, 0x0414, + 0x03A2, 0x033D, 0x02E3, 0x0293, 0x024B, 0x020B, 0x01D2, 0x019F, 0x0172, + 0x014A, 0x0126, 0x0106, 0x00E9, 0x00D0, 0x00B9, 0x00A5, 0x0093, 0x0083, + 0x0075, 0x0068, 0x005D, 0x0052, 0x0049, 0x0041, 0x003A, 0x0034, 0x002E, + 0x0029, 0x0025, 0x0021, 0x001D, 0x001A, 0x0017, 0x0014, 0x0012, 0x0010, + 0x000E, 0x000D, 0x000B, 0x000A, 0x0009, 0x0008, 0x0007, 0x0006, 0x0005, + 0x0005, 0x0004, 0x0004, 0x0003, 0x0003, 0x0002, 0x0002, 0x0002, 0x0002, + 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0001, 0x0000, 0x0000, 0x0000, + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000}; + /* regulator supplies for sgtl5000, VDDD is an optional external supply */ enum sgtl5000_regulator_supplies { VDDA, @@ -382,6 +396,63 @@ static int dac_put_volsw(struct snd_kcontrol *kcontrol, return 0; } +/* + * custom function to get AVC threshold + * + * The threshold dB is calculated by rearranging the calculation from the + * avc_put_threshold function: register_value = 10^(dB/20) * 0.636 * 2^15 ==> + * dB = ( fls(register_value) - 14.347 ) * 6.02 + * + * As this calculation is expensive and the threshold dB values may not exeed + * 0 to 96 we use pre-calculated values. + */ +static int avc_get_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int db, i; + u16 reg = snd_soc_read(codec, SGTL5000_DAP_AVC_THRESHOLD); + + /* register value 0 => -96dB */ + if (!reg) { + ucontrol->value.integer.value[0] = 96; + ucontrol->value.integer.value[1] = 96; + return 0; + } + + /* get dB from register value (rounded down) */ + for (i = 0; avc_thr_db2reg[i] > reg; i++) + ; + db = i; + + ucontrol->value.integer.value[0] = db; + ucontrol->value.integer.value[1] = db; + + return 0; +} + +/* + * custom function to put AVC threshold + * + * The register value is calculated by following formula: + * register_value = 10^(dB/20) * 0.636 * 2^15 + * As this calculation is expensive and the threshold dB values may not exeed + * 0 to 96 we use pre-calculated values. + */ +static int avc_put_threshold(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol); + int db; + u16 reg; + + db = clamp((int)ucontrol->value.integer.value[0], 0, 96); + reg = avc_thr_db2reg[db]; + snd_soc_write(codec, SGTL5000_DAP_AVC_THRESHOLD, reg); + + return 0; +} + static const DECLARE_TLV_DB_SCALE(capture_6db_attenuate, -600, 600, 0); /* tlv for mic gain, 0db 20db 30db 40db */ @@ -396,6 +467,12 @@ static const DECLARE_TLV_DB_SCALE(headphone_volume, -5150, 50, 0); /* tlv for lineout volume, 31 steps of .5db each */ static const DECLARE_TLV_DB_SCALE(lineout_volume, -1550, 50, 0); +/* tlv for dap avc max gain, 0db, 6db, 12db */ +static const DECLARE_TLV_DB_SCALE(avc_max_gain, 0, 600, 0); + +/* tlv for dap avc threshold, */ +static const DECLARE_TLV_DB_MINMAX(avc_threshold, 0, 9600); + static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { /* SOC_DOUBLE_S8_TLV with invert */ { @@ -435,7 +512,15 @@ static const struct snd_kcontrol_new sgtl5000_snd_controls[] = { lineout_volume), SOC_SINGLE("Lineout Playback Switch", SGTL5000_CHIP_ANA_CTRL, 8, 1, 1), + /* Automatic Volume Control (DAP AVC) */ SOC_SINGLE("AVC Enable Switch", SGTL5000_DAP_AVC_CTRL, 0, 1, 0), + SOC_SINGLE("AVC Hard Limiter Switch", SGTL5000_DAP_AVC_CTRL, 5, 1, 0), + SOC_SINGLE_TLV("AVC Max Gain Volume", SGTL5000_DAP_AVC_CTRL, 12, 2, 0, + avc_max_gain), + SOC_SINGLE("AVC Integrator Response", SGTL5000_DAP_AVC_CTRL, 8, 3, 0), + SOC_SINGLE_EXT_TLV("AVC Threshold Volume", SGTL5000_DAP_AVC_THRESHOLD, + 0, 96, 0, avc_get_threshold, avc_put_threshold, + avc_threshold), }; /* mute the codec used by alsa core */ -- 2.1.4

3 2

[alsa-devel] [PATCH v2 00/18] Add support for Cirrus Logic CS47L35/L85/L90/L91 codecs
by Richard Fitzgerald 14 Jul '17

14 Jul '17

The Cirrus Logic CS47L35, CS47L85, CS47L90/91 codecs are complex audio SoC devices. In addition to the core audio capability they have onboard GPIO, regulators, DSPs and interrupt controller and a large register map space accessed over SPI or I2C. This family of codecs is based around common IP blocks and they are managed by a set of common drivers referred to as "Madera". Summary of main changes since V1: - dt bindings moved to separate patches - pdata struct descriptions fixed to be kerneldoc format - now re-uses the arizona micsupp and ldo1 regulators - various fixes and improvements to the pinctrl driver - gpio driver can now interoperate with the pinctrl driver - some changes to the way Kconfig options are selected Richard Fitzgerald (18): mfd: madera: Add register definitions for Cirrus Logic Madera codecs mfd: madera: Add common support for Cirrus Logic Madera codecs dt-bindings: mfd: Add bindings for Cirrus Logic Madera codecs mfd: madera: Register map tables for Cirrus Logic CS47L35 mfd: madera: Register map tables for Cirrus Logic CS47L85 mfd: madera: Register map tables for Cirrus Logic CS47L90/91 regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs irqchip: Add driver for Cirrus Logic Madera codecs pinctrl: madera: Add driver for Cirrus Logic Madera codecs dt-bindings: pinctrl: Add bindings for Cirrus Logic Madera codecs gpio: madera: Support Cirrus Logic Madera class codecs dt-bindings: gpio: Add bindings for GPIO on Cirrus Logic Madera codecs ASoC: madera: Add common support for Cirrus Logic Madera codecs dt-bindings: sound: Add bindings for Cirrus Logic Madera codecs ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35 ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85 ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90 .../devicetree/bindings/gpio/gpio-madera.txt | 27 + Documentation/devicetree/bindings/mfd/madera.txt | 96 + .../bindings/pinctrl/cirrus,madera-pinctrl.txt | 102 + .../bindings/regulator/arizona-regulator.txt | 3 +- Documentation/devicetree/bindings/sound/madera.txt | 66 + MAINTAINERS | 24 + drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-madera.c | 196 + drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-madera.c | 349 + drivers/mfd/Kconfig | 50 + drivers/mfd/Makefile | 13 + drivers/mfd/cs47l35-tables.c | 1688 ++++ drivers/mfd/cs47l85-tables.c | 3169 +++++++ drivers/mfd/cs47l90-tables.c | 2830 +++++++ drivers/mfd/madera-core.c | 635 ++ drivers/mfd/madera-i2c.c | 131 + drivers/mfd/madera-spi.c | 132 + drivers/mfd/madera.h | 52 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cirrus/Kconfig | 15 + drivers/pinctrl/cirrus/Makefile | 11 + drivers/pinctrl/cirrus/pinctrl-cs47l35.c | 46 + drivers/pinctrl/cirrus/pinctrl-cs47l85.c | 60 + drivers/pinctrl/cirrus/pinctrl-cs47l90.c | 58 + drivers/pinctrl/cirrus/pinctrl-madera.c | 1106 +++ drivers/pinctrl/cirrus/pinctrl-madera.h | 40 + drivers/regulator/Kconfig | 15 +- drivers/regulator/arizona-ldo1.c | 82 +- drivers/regulator/arizona-micsupp.c | 71 +- include/dt-bindings/sound/madera.h | 18 + include/linux/irqchip/irq-madera-pdata.h | 19 + include/linux/irqchip/irq-madera.h | 96 + include/linux/mfd/madera/core.h | 180 + include/linux/mfd/madera/pdata.h | 61 + include/linux/mfd/madera/registers.h | 8832 ++++++++++++++++++++ include/sound/madera-pdata.h | 58 + sound/soc/codecs/Kconfig | 23 + sound/soc/codecs/Makefile | 8 + sound/soc/codecs/cs47l35.c | 1747 ++++ sound/soc/codecs/cs47l85.c | 2706 ++++++ sound/soc/codecs/cs47l90.c | 2645 ++++++ sound/soc/codecs/madera.c | 4430 ++++++++++ sound/soc/codecs/madera.h | 470 ++ 47 files changed, 32363 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-madera.txt create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/sound/madera.txt create mode 100644 drivers/gpio/gpio-madera.c create mode 100644 drivers/irqchip/irq-madera.c create mode 100644 drivers/mfd/cs47l35-tables.c create mode 100644 drivers/mfd/cs47l85-tables.c create mode 100644 drivers/mfd/cs47l90-tables.c create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 drivers/pinctrl/cirrus/Kconfig create mode 100644 drivers/pinctrl/cirrus/Makefile create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l35.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l85.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l90.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.h create mode 100644 include/dt-bindings/sound/madera.h create mode 100644 include/linux/irqchip/irq-madera-pdata.h create mode 100644 include/linux/irqchip/irq-madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h create mode 100644 include/linux/mfd/madera/registers.h create mode 100644 include/sound/madera-pdata.h create mode 100644 sound/soc/codecs/cs47l35.c create mode 100644 sound/soc/codecs/cs47l85.c create mode 100644 sound/soc/codecs/cs47l90.c create mode 100644 sound/soc/codecs/madera.c create mode 100644 sound/soc/codecs/madera.h -- 1.9.1

8 49

[alsa-devel] [PATCH] ASoC: Intel: Skylake: Fix default dma_buffer_size
by Subhransu S. Prusty 10 Jul '17

10 Jul '17

If the dma_buffer_size is not defined in topology, fix it to 2ms default value to make backward compatible. Fixes: f6e6ab1d16ec ("ASoC: Intel: Skylake: Fix dma buffer size calculation") Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty(a)intel.com> --- sound/soc/intel/skylake/skl-messages.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c index eca85827dbd2..fb2f1f603f3c 100644 --- a/sound/soc/intel/skylake/skl-messages.c +++ b/sound/soc/intel/skylake/skl-messages.c @@ -540,6 +540,14 @@ static void skl_setup_cpr_gateway_cfg(struct skl_sst *ctx, cpr_mconfig->gtw_cfg.dma_buffer_size = mconfig->dma_buffer_size * dma_io_buf; + /* fallback to 2ms default value */ + if (!cpr_mconfig->gtw_cfg.dma_buffer_size) { + if (mconfig->hw_conn_type == SKL_CONN_SOURCE) + cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->obs; + else + cpr_mconfig->gtw_cfg.dma_buffer_size = 2 * mconfig->ibs; + } + cpr_mconfig->cpr_feature_mask = 0; cpr_mconfig->gtw_cfg.config_length = 0; -- 1.9.1

3 2

[alsa-devel] [PATCH v8 0/5] Add platform clock for BayTrail platforms
by Pierre-Louis Bossart 10 Jul '17

10 Jul '17

These patches specifically enable the audio MCLK required by Baytrail CR devices. It is the remaining part of a bigger set of patches (already merged in Mark Brown's tree) that enable sound for Baytrail CR devices (especially Asus T100TAF) [1]. They include the clock driver and clock enabling in the pmc_atom code (along with moving of the non-architectural pmc_atom driver code into drivers/platform/x86 as suggested by Thomas Gleixner [2]). This move includes a new header in include/linux/platform_data/x86/. While there is an agreement that the definitions for PMC clocks are not really platform data this location is seen as a good-enough compromise with an agreement between Darren Hart and Andy Shevchenko [3] [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/111704.html [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-October/113936.ht… [3] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-December/115892.h… Changes from v7: - Replaced clk-readl/writel by regular readl/writel - Fixed two nitpick comments (newline and driver name string) - Fixed [5:0] to [0..5] in comment (missed in v6) Changes from v6: - Addressed comments from Stephen Boyd, Andy Shevchenko and Vinod Koul - Renamed clk-byt-plt to clk-pmc-atom - Rebase to 4.10-rc3 (broonie/for-next) - Added helper functions to make error handling more compact - Removed module-related code since it's not possible/supported - Removed useless tests on remove - PMC_CLK_OFFSET move to clk-pcm-atom (more logical) - Split typo correction and makefile fix in separate patches - small fixes (spaces, defaults in switches, alphabetical order, use of clk_writel/readl and no test on write, simpler error handling, use of while(i--), unsigned loop variables, kernel doc fields, format-patch -M -C -D, use of PLATFORM_DEVID_NONE) Changes from v5: - fix build error reported by kbuild test robot - split the clk driver code from x86 platform changes Changes from v4: - move the pmc_atom driver from arch/x86/platform/atom to drivers/platform/x86 Changes from v3: - replace devm_kzalloc with devm_kcalloc - add x86 architecture maintainers Changes from v2: - move clk platform data structures to a separate include file - store clk_hw pointer for the fixed rate clocks Changes from v1: - register the clk device as child of pmc device - pass iomem pointer from pmc driver to clk driver to avoid using pmc_atom_read()/write() and use readl/writel API instead - use devm_clk_hw_register/clkdev_hw_create instead of clk_register/clkdev_create Irina Tirdea (3): clk: x86: Add Atom PMC platform clocks arch/x86/platform/atom: Move pmc_atom to drivers/platform/x86 platform/x86: Enable Atom PMC platform clocks Pierre-Louis Bossart (2): clk: Make x86/ conditional on CONFIG_COMMON_CLK platform/x86: fix typo in comment arch/x86/Kconfig | 4 - arch/x86/platform/atom/Makefile | 1 - drivers/acpi/acpi_lpss.c | 2 +- drivers/clk/Makefile | 2 + drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-pmc-atom.c | 371 +++++++++++++++++++++ drivers/platform/x86/Kconfig | 5 + drivers/platform/x86/Makefile | 1 + .../atom => drivers/platform/x86}/pmc_atom.c | 88 ++++- include/linux/platform_data/x86/clk-pmc-atom.h | 44 +++ .../linux/platform_data/x86}/pmc_atom.h | 2 +- 11 files changed, 506 insertions(+), 15 deletions(-) create mode 100644 drivers/clk/x86/clk-pmc-atom.c rename {arch/x86/platform/atom => drivers/platform/x86}/pmc_atom.c (87%) create mode 100644 include/linux/platform_data/x86/clk-pmc-atom.h rename {arch/x86/include/asm => include/linux/platform_data/x86}/pmc_atom.h (98%) -- 2.7.4

4 11

[alsa-devel] [PATCH] ASoC: spear: fix error return code in spdif_in_probe()
by Gustavo A. R. Silva 07 Jul '17

07 Jul '17

platform_get_irq() returns an error code, but the spdif_in driver ignores it and always returns -EINVAL. This is not correct, and prevents -EPROBE_DEFER from being propagated properly. Notice that platform_get_irq() no longer returns 0 on error: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Print error message and propagate the return value of platform_get_irq on failure. Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> --- sound/soc/spear/spdif_in.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/sound/soc/spear/spdif_in.c b/sound/soc/spear/spdif_in.c index 977a078..7f32527 100644 --- a/sound/soc/spear/spdif_in.c +++ b/sound/soc/spear/spdif_in.c @@ -223,8 +223,10 @@ static int spdif_in_probe(struct platform_device *pdev) host->io_base = io_base; host->irq = platform_get_irq(pdev, 0); - if (host->irq < 0) - return -EINVAL; + if (host->irq < 0) { + dev_warn(&pdev->dev, "failed to get IRQ: %d\n", host->irq); + return host->irq; + } host->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(host->clk)) -- 2.5.0

2 1