May 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: Intel: Atom: Remove unneeded linux/miscdevice.h include
by Corentin Labbe 19 Sep '17

19 Sep '17

No file in sound/soc/intel/ use any miscdevice. This patch remove this uncessary include. Signed-off-by: Corentin Labbe <clabbe.montjoie(a)gmail.com> --- sound/soc/intel/atom/sst/sst_acpi.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c index f4d92bb..a971a58 100644 --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -23,7 +23,6 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/io.h> -#include <linux/miscdevice.h> #include <linux/platform_device.h> #include <linux/firmware.h> #include <linux/pm_runtime.h> -- 2.10.2

2 1

[alsa-devel] [PATCH 0/9] AC97 device/driver model revamp
by Robert Jarzmik 19 Sep '17

19 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 Last submission was a RFC in here: http://www.gossamer-threads.com/lists/linux/kernel/2446863 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 The driving ideas are still the same, and I put them in [1] for memory. This is the first post RFC submission. In order to make a full demonstration of the framework, wm97xx was converted to an MFD, see [2] for the "why". As this serie is a complete wm9713 change towards the new AC97 bus, here is the patch organization : - 1/9, 2/9, 3/9 and 5/9: the new AC97 bus, for Mark and Takashi to review - 4/9: wm9713 conversion, this one has ugly #ifdefs, should be reviewed more carefully - 6/9: prerequisite for final 9/9, for Marek and Sebastian to approve => this one is independent and can flow through Sebastian's tree in this next-cycle if accepted - 7/9: prerequisite for final 9/9, for Mark/Dmitry => this one is also independent and can flow in this cycle if accepted - 8/9: prerequisite for final 9/9, for Lee to review => this one has a dependency on 2/9, so it probably can't fit in this next-cycle - 9/9: this last one depends on all the patches before, so it can't fit in this next-cycle As a sum-up, I'd like to push for review for this -next cycle at least the patches 1, 2, 3, 5, 6 and 9. Happy review. Robert Jarzmik (9): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: add new ac97 bus support ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support power_supply: wm97xx_battery: use power_supply_get_drvdata Input: wm97xx: split out touchscreen registering mfd: wm97xx-core: core support for wm97xx Codec Input: wm97xx: add new AC97 bus support drivers/input/touchscreen/Kconfig | 2 +- drivers/input/touchscreen/wm97xx-core.c | 247 +++++++++++----- drivers/mfd/Kconfig | 14 + drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 ++++++++++++++++++ drivers/power/supply/wm97xx_battery.c | 25 +- include/linux/mfd/wm97xx.h | 31 ++ include/sound/ac97/codec.h | 115 +++++++ include/sound/ac97/compat.h | 21 ++ include/sound/ac97/controller.h | 85 ++++++ include/sound/ac97/regs.h | 262 ++++++++++++++++ include/sound/ac97_codec.h | 239 +-------------- include/sound/pxa2xx-lib.h | 15 +- sound/Kconfig | 2 + sound/Makefile | 1 + sound/ac97/Kconfig | 19 ++ sound/ac97/Makefile | 8 + sound/ac97/ac97_core.h | 10 + sound/ac97/bus.c | 510 ++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 + sound/ac97/snd_ac97_compat.c | 105 +++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 39 ++- sound/soc/Kconfig | 4 + sound/soc/codecs/Kconfig | 3 +- sound/soc/codecs/wm9713.c | 37 ++- sound/soc/pxa/Kconfig | 5 +- sound/soc/pxa/pxa2xx-ac97.c | 22 +- 28 files changed, 1738 insertions(+), 382 deletions(-) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4 [1] RFC PATCH reminder: Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. [2] As a corollary, wm97xx is changed into a MFD device, which at least spawns: - the touchscreen device - the ac97 codec - the problem to solve was stated in http://www.gossamer-threads.com/lists/linux/kernel/2510113#2510113

9 38

[alsa-devel] [PATCH 0/2] Add ACPI table for the ts3a227e driver
by Thierry Escande 19 Sep '17

19 Sep '17

Hi, This series adds ACPI match table for the ts3a227e driver. The ts3a227e is an Autonomous Audio Accessory Detection and Configuration Switch used to detect audio accessory features like jack plugging and unplugging, mic presence, and button pressed events. This series also fixes a null pointer dereference occurring in the TI max9890 driver when the ts3a227e hardware is present and its driver probed. The jack detection was enabled in the ts3a227e driver before the jack structure was allocated, causing the null pointer access. Regards, Thierry Fang, Yang A (1): ASoC: ts3a227e: add acpi table Thierry Escande (1): ASoc: cht_bsw_max98090_ti: Fix jack initialization sound/soc/codecs/ts3a227e.c | 10 ++++++ sound/soc/intel/boards/cht_bsw_max98090_ti.c | 52 +++++++++++++++++----------- 2 files changed, 41 insertions(+), 21 deletions(-) -- 2.7.4

3 6

[alsa-devel] [PATCH v3 00/11] Add STM32 DFSDM support
by Arnaud Pouliquen 11 Sep '17

11 Sep '17

Hello, I kept it as RFC as i reworked the global design (but also because not full validated...). Regarding Mark and Jonathan's comments, I decided to try an implementation with DMA support in IIO instead of handling it in ASOC. Solution seems more straightforward but as DMA cyclic mode and associated buffer block API is not part of IIO today, I still need some hacks... To be honest, I tried to integrate DMA cyclic management and associated buffer block Consumer API. but no enough expertise on IIO to success... :( Advantage vs V2: - No more data processing need in ASoC , done in IIO - ASoC uses IIO consumer interface ( except for buffer callback) Drawback : - Need to create a "SPI bus" trigger to allo to use Buffer consumer API => Need to find a solution to set this trigger by default in IIO audio driver - No standard buffer management - Implement DMA cyclic in DFSDM IIO driver. - Define specific API to handle buffer callback per period instead of callback per samples generated by iio_push_to_buffers_with_timestamp. V2-V3 delta: - New patches to support ASoC DMA codec in DT - ASoC: Add Bindins for DMIC codec driver. - ASoC: codec: add DT support in dmic codec. - New patches to allow in-kernel set of IIO buffer size and watermark - IIO: consumer: allow to set buffer sizes. - IIO DFSDM drivers - Split audio and ADC support in 2 drivers. - Implement DMA cyclic mode. - Add SPI bus Trigger for buffer management. - IIO sigma delta adc drivers - Suppress "simple and rename driver. - ASoC driver - Suppress DMA engine. - Suppress copy ops. - Use IIO consmumer interface to enable/Disable DFSDM. Regards, Arnaud Arnaud Pouliquen (11): iio: Add hardware consumer support IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM support for Sigma delta ADC IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: Add Bindins for DMIC codec driver ASoC: codec: add DT support in dmic codec ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 120 ++++ Documentation/devicetree/bindings/sound/dmic.txt | 11 + .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 41 ++ drivers/iio/Kconfig | 6 + drivers/iio/Makefile | 1 + drivers/iio/adc/Kconfig | 50 ++ drivers/iio/adc/Makefile | 4 + drivers/iio/adc/sd_adc_modulator.c | 98 +++ drivers/iio/adc/stm32-dfsdm-adc.c | 419 ++++++++++++ drivers/iio/adc/stm32-dfsdm-audio.c | 720 +++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 658 +++++++++++++++++++ drivers/iio/adc/stm32-dfsdm.h | 372 +++++++++++ drivers/iio/buffer/industrialio-buffer-cb.c | 12 + drivers/iio/hw_consumer.c | 156 +++++ include/linux/iio/adc/stm32-dfsdm-audio.h | 41 ++ include/linux/iio/consumer.h | 13 + include/linux/iio/hw_consumer.h | 12 + sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/codecs/dmic.c | 8 + sound/soc/stm/Kconfig | 10 + sound/soc/stm/Makefile | 2 + sound/soc/stm/stm32_adfsdm.c | 362 +++++++++++ 24 files changed, 3131 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/dmic.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-audio.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/hw_consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-audio.h create mode 100644 include/linux/iio/hw_consumer.h create mode 100644 sound/soc/stm/Kconfig create mode 100644 sound/soc/stm/Makefile create mode 100644 sound/soc/stm/stm32_adfsdm.c V2: Patch-set associated to this RFC proposes an implementation of the DFSDM features shared between ASoC and IIO frameworks. Patch-set is only a Skeleton of the drivers, so a base to discuss and validate a design. It contains minimum code to allow probing (with DT) and to expose the ASoC and IIO ABI. Hope that is sufficent in a first step to allow to focus on APIs. In this patch-set there are two new APIs used: - IIO in-kern API: based on hw_customer API proposed by Lars - ASOC <-> IIO API inspired by API defined for hdmi-codec for ASoC/DRM interconnect. API is dedicated to DFSDM only. Notice also that this design is based on following assumption: - Audio stream ABI interface is ASoC, no access to data through IIO ABI for PDM. - ASoC DMA should be used for audio transfer as designed for real time stream. - Need some runtime parameters exchange between ASoC and IIO due to the correlation between the sample frequency, the DFSDM decimation factor and the associated scaling. - "ASoC: dmaengine_pcm: add copy support" patch: I added a patch in ASoC that allows to implement a copy function to process data after DMA transfer. Requested, as DFSDM samples captured contain channel ID on 8-LSB bits and need also a potential rescale to present DAT on 24-bits. - "IIO: ADC: add sigma delta modulator support" patch: Simple dummy driver created to support external Sigma delta modulator. It is binded to DFSDM driver through hw_customer API. - 1.9.1

5 35

[alsa-devel] [RFC PATCH 0/7] AC97 device/driver model revamp
by Robert Jarzmik 04 Sep '17

04 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 And now it transformed into this RFC, which would bring a ground for AC'97 devices closer to the linux device/driver model. This is just an RFC to see if we understand each other Mark. Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. Cheers. -- Robert Robert Jarzmik (7): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support ARM: pxa: mioa701 remove wm9713 from platform devices ASoC: mioa701_wm9713: convert to new ac97 bus ASoC: add new ac97 bus support arch/arm/mach-pxa/mioa701.c | 1 - include/sound/ac97/codec.h | 98 ++++++++++++ include/sound/ac97/compat.h | 21 +++ include/sound/ac97/controller.h | 39 +++++ include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++ include/sound/ac97_codec.h | 239 +---------------------------- include/sound/pxa2xx-lib.h | 14 +- sound/Kconfig | 7 + sound/Makefile | 1 + sound/ac97/Kconfig | 9 ++ sound/ac97/Makefile | 5 + sound/ac97/ac97_core.h | 10 ++ sound/ac97/bus.c | 330 ++++++++++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 ++ sound/ac97/snd_ac97_compat.c | 104 +++++++++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 31 ++-- sound/soc/Kconfig | 4 + sound/soc/codecs/wm9713.c | 62 +++++++- sound/soc/pxa/Kconfig | 4 +- sound/soc/pxa/mioa701_wm9713.c | 4 +- sound/soc/pxa/pxa2xx-ac97.c | 12 +- 22 files changed, 1000 insertions(+), 273 deletions(-) create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4

3 29

[alsa-devel] [PATCH 4/5] staging: max98927: Added missing \n to end of dev_err messages
by Ryan Lee 31 Aug '17

31 Aug '17

Signed-off-by: Ryan Lee <ryans.lee(a)maximintegrated.com> --- sound/soc/codecs/max98927.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/max98927.c b/sound/soc/codecs/max98927.c index e787a03..9b864e2 100644 --- a/sound/soc/codecs/max98927.c +++ b/sound/soc/codecs/max98927.c @@ -160,7 +160,7 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) mode = MAX98927_PCM_MASTER_MODE_MASTER; break; default: - dev_err(codec->dev, "DAI clock mode unsupported"); + dev_err(codec->dev, "DAI clock mode unsupported\n"); return -EINVAL; } @@ -176,7 +176,7 @@ static int max98927_dai_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) invert = MAX98927_PCM_MODE_CFG_PCM_BCLKEDGE; break; default: - dev_err(codec->dev, "DAI invert mode unsupported"); + dev_err(codec->dev, "DAI invert mode unsupported\n"); return -EINVAL; } @@ -331,7 +331,7 @@ static int max98927_dai_hw_params(struct snd_pcm_substream *substream, chan_sz = MAX98927_PCM_MODE_CFG_CHANSZ_32; break; default: - dev_err(codec->dev, "format unsupported %d", + dev_err(codec->dev, "format unsupported %d\n", params_format(params)); goto err; } -- 2.7.4

2 1

[alsa-devel] [PATCH] ASoC: spear: Remove redundant message
by dspmihai 10 Aug '17

10 Aug '17

This was reported by checkpatch.pl Signed-off-by: Despotovici Mihai <despotovici.mihai(a)gmail.com> --- sound/soc/spear/spdif_in.c | 4 +--- sound/soc/spear/spdif_out.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/spear/spdif_in.c b/sound/soc/spear/spdif_in.c index 977a078..0f3b1a8 100644 --- a/sound/soc/spear/spdif_in.c +++ b/sound/soc/spear/spdif_in.c @@ -216,10 +216,8 @@ static int spdif_in_probe(struct platform_device *pdev) return -EINVAL; host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_warn(&pdev->dev, "kzalloc fail\n"); + if (!host) return -ENOMEM; - } host->io_base = io_base; host->irq = platform_get_irq(pdev, 0); diff --git a/sound/soc/spear/spdif_out.c b/sound/soc/spear/spdif_out.c index 0a72d52..58d5843 100644 --- a/sound/soc/spear/spdif_out.c +++ b/sound/soc/spear/spdif_out.c @@ -282,10 +282,8 @@ static int spdif_out_probe(struct platform_device *pdev) int ret; host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_warn(&pdev->dev, "kzalloc fail\n"); + if (!host) return -ENOMEM; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, res); -- 2.7.4

3 2

[alsa-devel] [PATCH] streamline TLV320AIC23 drivers
by Jens Rottmann 01 Aug '17

01 Aug '17

The iMX-TLV320AIC23 driver isn't from Freescale, but from a company named Eukrea Electromatique, originally for their own boards. From the code I get the impression it is a bit older, its DT options use a differing naming scheme. Patch it up a bit: - Remove Eukrea naming, i.MX is from Freescale, TLV320AIC23 is from TI, driver was written by Eukrea, but it's DT capable, so it's not exclusive: - Kconfig option title - 'model' option - driver 'compatible' string - Other options just have changed over time, this driver remaining (one of) the last with the old semantics: - 'audio-codec' option (also moved from ssi node) - 'mux-int/ext-port' options - All options stay backwards compatible, the DT binding documents new and old names. CONFIG variable and files have not been renamed, though, so no need to change old defconfigs. Signed-off-by: Jens Rottmann <Jens.Rottmann(a)ADLINKtech.com> --- --- a/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt +++ b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt @@ -1,16 +1,23 @@ -Audio complex for Eukrea boards with tlv320aic23 codec. +Audio complex for Freescale i.MX boards with TI TLV320AIC23 I2S codecs, +like those from Eukrea Electromatique. Required properties: - - compatible : "eukrea,asoc-tlv320" + - compatible : "fsl,imx-audio-tlv320aic23" or + "eukrea,asoc-tlv320" (deprecated) - - eukrea,model : The user-visible name of this sound complex. + - model : The user-visible name of this sound complex. + - eukrea,model : Dito, deprecated. - ssi-controller : The phandle of the SSI controller. - - fsl,mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). + - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). + - fsl,mux-int-port : Dito, deprecated. - - fsl,mux-ext-port : The external port of the i.MX audio muxer. + - mux-ext-port : The external port of the i.MX audio muxer. + - fsl,mux-ext-port : Dito, deprecated. + + - audio-codec : The phandle of the audio codec. Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. @@ -18,9 +25,10 @@ hardware manual. Example: sound { - compatible = "eukrea,asoc-tlv320"; - eukrea,model = "imx51-eukrea-tlv320aic23"; + compatible = "fsl,imx-audio-tlv320aic23"; + model = "imx51-eukrea-tlv320aic23"; ssi-controller = <&ssi2>; - fsl,mux-int-port = <2>; - fsl,mux-ext-port = <3>; + mux-int-port = <2>; + mux-ext-port = <3>; + audio-codec = <&codec>; }; --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -220,7 +220,7 @@ config SND_SOC_PHYCORE_AC97 and phyCARD boards in AC97 mode config SND_SOC_EUKREA_TLV320 - tristate "Eukrea TLV320" + tristate "SoC Audio support for i.MX boards with TLV320AIC23" depends on ARCH_MXC && I2C select SND_SOC_TLV320AIC23_I2C select SND_SOC_IMX_AUDMUX --- a/sound/soc/fsl/eukrea-tlv320.c +++ b/sound/soc/fsl/eukrea-tlv320.c @@ -92,11 +92,13 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) eukrea_tlv320.dev = &pdev->dev; if (np) { - ret = snd_soc_of_parse_card_name(&eukrea_tlv320, - "eukrea,model"); + ret = snd_soc_of_parse_card_name(&eukrea_tlv320, "model"); + if (ret) /* backwards compatible */ + ret = snd_soc_of_parse_card_name(&eukrea_tlv320, + "eukrea,model"); if (ret) { dev_err(&pdev->dev, - "eukrea,model node missing or invalid.\n"); + "model node missing or invalid.\n"); goto err; } @@ -109,22 +111,28 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) goto err; } - codec_np = of_parse_phandle(ssi_np, "codec-handle", 0); + codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0); + if (!codec_np) /* backwards compatible */ + codec_np = of_parse_phandle(ssi_np, "codec-handle", 0); if (codec_np) eukrea_tlv320_dai.codec_of_node = codec_np; else - dev_err(&pdev->dev, "codec-handle node missing or invalid.\n"); + dev_err(&pdev->dev, "audio-codec node missing or invalid.\n"); - ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port); + ret = of_property_read_u32(np, "mux-int-port", &int_port); + if (ret) /* backwards compatible */ + ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port); if (ret) { dev_err(&pdev->dev, - "fsl,mux-int-port node missing or invalid.\n"); + "mux-int-port node missing or invalid.\n"); return ret; } - ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port); + ret = of_property_read_u32(np, "mux-ext-port", &ext_port); + if (ret) /* backwards compatible */ + ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port); if (ret) { dev_err(&pdev->dev, - "fsl,mux-ext-port node missing or invalid.\n"); + "mux-ext-port node missing or invalid.\n"); return ret; } @@ -213,7 +221,8 @@ static int eukrea_tlv320_remove(struct platform_device *pdev) } static const struct of_device_id imx_tlv320_dt_ids[] = { - { .compatible = "eukrea,asoc-tlv320"}, + { .compatible = "eukrea,asoc-tlv320"}, /* backwards compatible */ + { .compatible = "fsl,imx-audio-tlv320aic23"}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_tlv320_dt_ids); _

4 4

[alsa-devel] Patch for Digidesign Mbox 2 (set sample rate)
by Viktor Radnai 19 Jul '17

19 Jul '17

Hi there, I have recently bought a Digidesign Mbox 2 Mini and found the lack of support for 44100Hz sample rate in the driver limiting (the sample rate was hard-set to 48000Hz by the original author even though the device supports it, because he couldn't get the frame rate switching to work reliably). I had a go at hacking the driver and came up with the following patch which appears to work on the MBox 2 Mini: https://pastebin.com/kzzTDj9T I have built and tested this with Linux 4.8.15 without any realtime patches. I am planning to pick up a "full size" Mbox 2 as well, in the meantime if anyone on the list owns one I would appreciate if you could test this and let me know the result. There is a possibility that it will not work without the "magic" init sequence that I have removed because it does not look like it's needed on the Mini. Although I would be a bit surprised because the two devices are apparently identical to the point that the Mini allows the use of it's physically nonexistent features. Once someone could confirm that this works, I would like to get it merged. This is my first attempt at submitting a patch for any Linux device driver so please let me know if I need to do anything else :) Cheers, Vik -- My other sig is hilarious

3 6

[alsa-devel] [PATCH v2 00/18] Add support for Cirrus Logic CS47L35/L85/L90/L91 codecs
by Richard Fitzgerald 14 Jul '17

14 Jul '17

The Cirrus Logic CS47L35, CS47L85, CS47L90/91 codecs are complex audio SoC devices. In addition to the core audio capability they have onboard GPIO, regulators, DSPs and interrupt controller and a large register map space accessed over SPI or I2C. This family of codecs is based around common IP blocks and they are managed by a set of common drivers referred to as "Madera". Summary of main changes since V1: - dt bindings moved to separate patches - pdata struct descriptions fixed to be kerneldoc format - now re-uses the arizona micsupp and ldo1 regulators - various fixes and improvements to the pinctrl driver - gpio driver can now interoperate with the pinctrl driver - some changes to the way Kconfig options are selected Richard Fitzgerald (18): mfd: madera: Add register definitions for Cirrus Logic Madera codecs mfd: madera: Add common support for Cirrus Logic Madera codecs dt-bindings: mfd: Add bindings for Cirrus Logic Madera codecs mfd: madera: Register map tables for Cirrus Logic CS47L35 mfd: madera: Register map tables for Cirrus Logic CS47L85 mfd: madera: Register map tables for Cirrus Logic CS47L90/91 regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs irqchip: Add driver for Cirrus Logic Madera codecs pinctrl: madera: Add driver for Cirrus Logic Madera codecs dt-bindings: pinctrl: Add bindings for Cirrus Logic Madera codecs gpio: madera: Support Cirrus Logic Madera class codecs dt-bindings: gpio: Add bindings for GPIO on Cirrus Logic Madera codecs ASoC: madera: Add common support for Cirrus Logic Madera codecs dt-bindings: sound: Add bindings for Cirrus Logic Madera codecs ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35 ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85 ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90 .../devicetree/bindings/gpio/gpio-madera.txt | 27 + Documentation/devicetree/bindings/mfd/madera.txt | 96 + .../bindings/pinctrl/cirrus,madera-pinctrl.txt | 102 + .../bindings/regulator/arizona-regulator.txt | 3 +- Documentation/devicetree/bindings/sound/madera.txt | 66 + MAINTAINERS | 24 + drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-madera.c | 196 + drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-madera.c | 349 + drivers/mfd/Kconfig | 50 + drivers/mfd/Makefile | 13 + drivers/mfd/cs47l35-tables.c | 1688 ++++ drivers/mfd/cs47l85-tables.c | 3169 +++++++ drivers/mfd/cs47l90-tables.c | 2830 +++++++ drivers/mfd/madera-core.c | 635 ++ drivers/mfd/madera-i2c.c | 131 + drivers/mfd/madera-spi.c | 132 + drivers/mfd/madera.h | 52 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cirrus/Kconfig | 15 + drivers/pinctrl/cirrus/Makefile | 11 + drivers/pinctrl/cirrus/pinctrl-cs47l35.c | 46 + drivers/pinctrl/cirrus/pinctrl-cs47l85.c | 60 + drivers/pinctrl/cirrus/pinctrl-cs47l90.c | 58 + drivers/pinctrl/cirrus/pinctrl-madera.c | 1106 +++ drivers/pinctrl/cirrus/pinctrl-madera.h | 40 + drivers/regulator/Kconfig | 15 +- drivers/regulator/arizona-ldo1.c | 82 +- drivers/regulator/arizona-micsupp.c | 71 +- include/dt-bindings/sound/madera.h | 18 + include/linux/irqchip/irq-madera-pdata.h | 19 + include/linux/irqchip/irq-madera.h | 96 + include/linux/mfd/madera/core.h | 180 + include/linux/mfd/madera/pdata.h | 61 + include/linux/mfd/madera/registers.h | 8832 ++++++++++++++++++++ include/sound/madera-pdata.h | 58 + sound/soc/codecs/Kconfig | 23 + sound/soc/codecs/Makefile | 8 + sound/soc/codecs/cs47l35.c | 1747 ++++ sound/soc/codecs/cs47l85.c | 2706 ++++++ sound/soc/codecs/cs47l90.c | 2645 ++++++ sound/soc/codecs/madera.c | 4430 ++++++++++ sound/soc/codecs/madera.h | 470 ++ 47 files changed, 32363 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-madera.txt create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/sound/madera.txt create mode 100644 drivers/gpio/gpio-madera.c create mode 100644 drivers/irqchip/irq-madera.c create mode 100644 drivers/mfd/cs47l35-tables.c create mode 100644 drivers/mfd/cs47l85-tables.c create mode 100644 drivers/mfd/cs47l90-tables.c create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 drivers/pinctrl/cirrus/Kconfig create mode 100644 drivers/pinctrl/cirrus/Makefile create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l35.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l85.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l90.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.h create mode 100644 include/dt-bindings/sound/madera.h create mode 100644 include/linux/irqchip/irq-madera-pdata.h create mode 100644 include/linux/irqchip/irq-madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h create mode 100644 include/linux/mfd/madera/registers.h create mode 100644 include/sound/madera-pdata.h create mode 100644 sound/soc/codecs/cs47l35.c create mode 100644 sound/soc/codecs/cs47l85.c create mode 100644 sound/soc/codecs/cs47l90.c create mode 100644 sound/soc/codecs/madera.c create mode 100644 sound/soc/codecs/madera.h -- 1.9.1

8 49