April 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v3 00/11] Add STM32 DFSDM support
by Arnaud Pouliquen 11 Sep '17

11 Sep '17

Hello, I kept it as RFC as i reworked the global design (but also because not full validated...). Regarding Mark and Jonathan's comments, I decided to try an implementation with DMA support in IIO instead of handling it in ASOC. Solution seems more straightforward but as DMA cyclic mode and associated buffer block API is not part of IIO today, I still need some hacks... To be honest, I tried to integrate DMA cyclic management and associated buffer block Consumer API. but no enough expertise on IIO to success... :( Advantage vs V2: - No more data processing need in ASoC , done in IIO - ASoC uses IIO consumer interface ( except for buffer callback) Drawback : - Need to create a "SPI bus" trigger to allo to use Buffer consumer API => Need to find a solution to set this trigger by default in IIO audio driver - No standard buffer management - Implement DMA cyclic in DFSDM IIO driver. - Define specific API to handle buffer callback per period instead of callback per samples generated by iio_push_to_buffers_with_timestamp. V2-V3 delta: - New patches to support ASoC DMA codec in DT - ASoC: Add Bindins for DMIC codec driver. - ASoC: codec: add DT support in dmic codec. - New patches to allow in-kernel set of IIO buffer size and watermark - IIO: consumer: allow to set buffer sizes. - IIO DFSDM drivers - Split audio and ADC support in 2 drivers. - Implement DMA cyclic mode. - Add SPI bus Trigger for buffer management. - IIO sigma delta adc drivers - Suppress "simple and rename driver. - ASoC driver - Suppress DMA engine. - Suppress copy ops. - Use IIO consmumer interface to enable/Disable DFSDM. Regards, Arnaud Arnaud Pouliquen (11): iio: Add hardware consumer support IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM support for Sigma delta ADC IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: Add Bindins for DMIC codec driver ASoC: codec: add DT support in dmic codec ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 120 ++++ Documentation/devicetree/bindings/sound/dmic.txt | 11 + .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 41 ++ drivers/iio/Kconfig | 6 + drivers/iio/Makefile | 1 + drivers/iio/adc/Kconfig | 50 ++ drivers/iio/adc/Makefile | 4 + drivers/iio/adc/sd_adc_modulator.c | 98 +++ drivers/iio/adc/stm32-dfsdm-adc.c | 419 ++++++++++++ drivers/iio/adc/stm32-dfsdm-audio.c | 720 +++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 658 +++++++++++++++++++ drivers/iio/adc/stm32-dfsdm.h | 372 +++++++++++ drivers/iio/buffer/industrialio-buffer-cb.c | 12 + drivers/iio/hw_consumer.c | 156 +++++ include/linux/iio/adc/stm32-dfsdm-audio.h | 41 ++ include/linux/iio/consumer.h | 13 + include/linux/iio/hw_consumer.h | 12 + sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/codecs/dmic.c | 8 + sound/soc/stm/Kconfig | 10 + sound/soc/stm/Makefile | 2 + sound/soc/stm/stm32_adfsdm.c | 362 +++++++++++ 24 files changed, 3131 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/dmic.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-audio.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/hw_consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-audio.h create mode 100644 include/linux/iio/hw_consumer.h create mode 100644 sound/soc/stm/Kconfig create mode 100644 sound/soc/stm/Makefile create mode 100644 sound/soc/stm/stm32_adfsdm.c V2: Patch-set associated to this RFC proposes an implementation of the DFSDM features shared between ASoC and IIO frameworks. Patch-set is only a Skeleton of the drivers, so a base to discuss and validate a design. It contains minimum code to allow probing (with DT) and to expose the ASoC and IIO ABI. Hope that is sufficent in a first step to allow to focus on APIs. In this patch-set there are two new APIs used: - IIO in-kern API: based on hw_customer API proposed by Lars - ASOC <-> IIO API inspired by API defined for hdmi-codec for ASoC/DRM interconnect. API is dedicated to DFSDM only. Notice also that this design is based on following assumption: - Audio stream ABI interface is ASoC, no access to data through IIO ABI for PDM. - ASoC DMA should be used for audio transfer as designed for real time stream. - Need some runtime parameters exchange between ASoC and IIO due to the correlation between the sample frequency, the DFSDM decimation factor and the associated scaling. - "ASoC: dmaengine_pcm: add copy support" patch: I added a patch in ASoC that allows to implement a copy function to process data after DMA transfer. Requested, as DFSDM samples captured contain channel ID on 8-LSB bits and need also a potential rescale to present DAT on 24-bits. - "IIO: ADC: add sigma delta modulator support" patch: Simple dummy driver created to support external Sigma delta modulator. It is binded to DFSDM driver through hw_customer API. - 1.9.1

5 35

[alsa-devel] [RFC PATCH 0/7] AC97 device/driver model revamp
by Robert Jarzmik 04 Sep '17

04 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 And now it transformed into this RFC, which would bring a ground for AC'97 devices closer to the linux device/driver model. This is just an RFC to see if we understand each other Mark. Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. Cheers. -- Robert Robert Jarzmik (7): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support ARM: pxa: mioa701 remove wm9713 from platform devices ASoC: mioa701_wm9713: convert to new ac97 bus ASoC: add new ac97 bus support arch/arm/mach-pxa/mioa701.c | 1 - include/sound/ac97/codec.h | 98 ++++++++++++ include/sound/ac97/compat.h | 21 +++ include/sound/ac97/controller.h | 39 +++++ include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++ include/sound/ac97_codec.h | 239 +---------------------------- include/sound/pxa2xx-lib.h | 14 +- sound/Kconfig | 7 + sound/Makefile | 1 + sound/ac97/Kconfig | 9 ++ sound/ac97/Makefile | 5 + sound/ac97/ac97_core.h | 10 ++ sound/ac97/bus.c | 330 ++++++++++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 ++ sound/ac97/snd_ac97_compat.c | 104 +++++++++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 31 ++-- sound/soc/Kconfig | 4 + sound/soc/codecs/wm9713.c | 62 +++++++- sound/soc/pxa/Kconfig | 4 +- sound/soc/pxa/mioa701_wm9713.c | 4 +- sound/soc/pxa/pxa2xx-ac97.c | 12 +- 22 files changed, 1000 insertions(+), 273 deletions(-) create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4

3 29

[alsa-devel] [PATCH] ASoC: spear: Remove redundant message
by dspmihai 10 Aug '17

10 Aug '17

This was reported by checkpatch.pl Signed-off-by: Despotovici Mihai <despotovici.mihai(a)gmail.com> --- sound/soc/spear/spdif_in.c | 4 +--- sound/soc/spear/spdif_out.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/spear/spdif_in.c b/sound/soc/spear/spdif_in.c index 977a078..0f3b1a8 100644 --- a/sound/soc/spear/spdif_in.c +++ b/sound/soc/spear/spdif_in.c @@ -216,10 +216,8 @@ static int spdif_in_probe(struct platform_device *pdev) return -EINVAL; host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_warn(&pdev->dev, "kzalloc fail\n"); + if (!host) return -ENOMEM; - } host->io_base = io_base; host->irq = platform_get_irq(pdev, 0); diff --git a/sound/soc/spear/spdif_out.c b/sound/soc/spear/spdif_out.c index 0a72d52..58d5843 100644 --- a/sound/soc/spear/spdif_out.c +++ b/sound/soc/spear/spdif_out.c @@ -282,10 +282,8 @@ static int spdif_out_probe(struct platform_device *pdev) int ret; host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_warn(&pdev->dev, "kzalloc fail\n"); + if (!host) return -ENOMEM; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, res); -- 2.7.4

3 2

[alsa-devel] [PATCH] streamline TLV320AIC23 drivers
by Jens Rottmann 01 Aug '17

01 Aug '17

The iMX-TLV320AIC23 driver isn't from Freescale, but from a company named Eukrea Electromatique, originally for their own boards. From the code I get the impression it is a bit older, its DT options use a differing naming scheme. Patch it up a bit: - Remove Eukrea naming, i.MX is from Freescale, TLV320AIC23 is from TI, driver was written by Eukrea, but it's DT capable, so it's not exclusive: - Kconfig option title - 'model' option - driver 'compatible' string - Other options just have changed over time, this driver remaining (one of) the last with the old semantics: - 'audio-codec' option (also moved from ssi node) - 'mux-int/ext-port' options - All options stay backwards compatible, the DT binding documents new and old names. CONFIG variable and files have not been renamed, though, so no need to change old defconfigs. Signed-off-by: Jens Rottmann <Jens.Rottmann(a)ADLINKtech.com> --- --- a/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt +++ b/Documentation/devicetree/bindings/sound/eukrea-tlv320.txt @@ -1,16 +1,23 @@ -Audio complex for Eukrea boards with tlv320aic23 codec. +Audio complex for Freescale i.MX boards with TI TLV320AIC23 I2S codecs, +like those from Eukrea Electromatique. Required properties: - - compatible : "eukrea,asoc-tlv320" + - compatible : "fsl,imx-audio-tlv320aic23" or + "eukrea,asoc-tlv320" (deprecated) - - eukrea,model : The user-visible name of this sound complex. + - model : The user-visible name of this sound complex. + - eukrea,model : Dito, deprecated. - ssi-controller : The phandle of the SSI controller. - - fsl,mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). + - mux-int-port : The internal port of the i.MX audio muxer (AUDMUX). + - fsl,mux-int-port : Dito, deprecated. - - fsl,mux-ext-port : The external port of the i.MX audio muxer. + - mux-ext-port : The external port of the i.MX audio muxer. + - fsl,mux-ext-port : Dito, deprecated. + + - audio-codec : The phandle of the audio codec. Note: The AUDMUX port numbering should start at 1, which is consistent with hardware manual. @@ -18,9 +25,10 @@ hardware manual. Example: sound { - compatible = "eukrea,asoc-tlv320"; - eukrea,model = "imx51-eukrea-tlv320aic23"; + compatible = "fsl,imx-audio-tlv320aic23"; + model = "imx51-eukrea-tlv320aic23"; ssi-controller = <&ssi2>; - fsl,mux-int-port = <2>; - fsl,mux-ext-port = <3>; + mux-int-port = <2>; + mux-ext-port = <3>; + audio-codec = <&codec>; }; --- a/sound/soc/fsl/Kconfig +++ b/sound/soc/fsl/Kconfig @@ -220,7 +220,7 @@ config SND_SOC_PHYCORE_AC97 and phyCARD boards in AC97 mode config SND_SOC_EUKREA_TLV320 - tristate "Eukrea TLV320" + tristate "SoC Audio support for i.MX boards with TLV320AIC23" depends on ARCH_MXC && I2C select SND_SOC_TLV320AIC23_I2C select SND_SOC_IMX_AUDMUX --- a/sound/soc/fsl/eukrea-tlv320.c +++ b/sound/soc/fsl/eukrea-tlv320.c @@ -92,11 +92,13 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) eukrea_tlv320.dev = &pdev->dev; if (np) { - ret = snd_soc_of_parse_card_name(&eukrea_tlv320, - "eukrea,model"); + ret = snd_soc_of_parse_card_name(&eukrea_tlv320, "model"); + if (ret) /* backwards compatible */ + ret = snd_soc_of_parse_card_name(&eukrea_tlv320, + "eukrea,model"); if (ret) { dev_err(&pdev->dev, - "eukrea,model node missing or invalid.\n"); + "model node missing or invalid.\n"); goto err; } @@ -109,22 +111,28 @@ static int eukrea_tlv320_probe(struct platform_device *pdev) goto err; } - codec_np = of_parse_phandle(ssi_np, "codec-handle", 0); + codec_np = of_parse_phandle(pdev->dev.of_node, "audio-codec", 0); + if (!codec_np) /* backwards compatible */ + codec_np = of_parse_phandle(ssi_np, "codec-handle", 0); if (codec_np) eukrea_tlv320_dai.codec_of_node = codec_np; else - dev_err(&pdev->dev, "codec-handle node missing or invalid.\n"); + dev_err(&pdev->dev, "audio-codec node missing or invalid.\n"); - ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port); + ret = of_property_read_u32(np, "mux-int-port", &int_port); + if (ret) /* backwards compatible */ + ret = of_property_read_u32(np, "fsl,mux-int-port", &int_port); if (ret) { dev_err(&pdev->dev, - "fsl,mux-int-port node missing or invalid.\n"); + "mux-int-port node missing or invalid.\n"); return ret; } - ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port); + ret = of_property_read_u32(np, "mux-ext-port", &ext_port); + if (ret) /* backwards compatible */ + ret = of_property_read_u32(np, "fsl,mux-ext-port", &ext_port); if (ret) { dev_err(&pdev->dev, - "fsl,mux-ext-port node missing or invalid.\n"); + "mux-ext-port node missing or invalid.\n"); return ret; } @@ -213,7 +221,8 @@ static int eukrea_tlv320_remove(struct platform_device *pdev) } static const struct of_device_id imx_tlv320_dt_ids[] = { - { .compatible = "eukrea,asoc-tlv320"}, + { .compatible = "eukrea,asoc-tlv320"}, /* backwards compatible */ + { .compatible = "fsl,imx-audio-tlv320aic23"}, { /* sentinel */ } }; MODULE_DEVICE_TABLE(of, imx_tlv320_dt_ids); _

4 4

[alsa-devel] Patch for Digidesign Mbox 2 (set sample rate)
by Viktor Radnai 19 Jul '17

19 Jul '17

Hi there, I have recently bought a Digidesign Mbox 2 Mini and found the lack of support for 44100Hz sample rate in the driver limiting (the sample rate was hard-set to 48000Hz by the original author even though the device supports it, because he couldn't get the frame rate switching to work reliably). I had a go at hacking the driver and came up with the following patch which appears to work on the MBox 2 Mini: https://pastebin.com/kzzTDj9T I have built and tested this with Linux 4.8.15 without any realtime patches. I am planning to pick up a "full size" Mbox 2 as well, in the meantime if anyone on the list owns one I would appreciate if you could test this and let me know the result. There is a possibility that it will not work without the "magic" init sequence that I have removed because it does not look like it's needed on the Mini. Although I would be a bit surprised because the two devices are apparently identical to the point that the Mini allows the use of it's physically nonexistent features. Once someone could confirm that this works, I would like to get it merged. This is my first attempt at submitting a patch for any Linux device driver so please let me know if I need to do anything else :) Cheers, Vik -- My other sig is hilarious

3 6

[alsa-devel] [PATCH v2 00/18] Add support for Cirrus Logic CS47L35/L85/L90/L91 codecs
by Richard Fitzgerald 14 Jul '17

14 Jul '17

The Cirrus Logic CS47L35, CS47L85, CS47L90/91 codecs are complex audio SoC devices. In addition to the core audio capability they have onboard GPIO, regulators, DSPs and interrupt controller and a large register map space accessed over SPI or I2C. This family of codecs is based around common IP blocks and they are managed by a set of common drivers referred to as "Madera". Summary of main changes since V1: - dt bindings moved to separate patches - pdata struct descriptions fixed to be kerneldoc format - now re-uses the arizona micsupp and ldo1 regulators - various fixes and improvements to the pinctrl driver - gpio driver can now interoperate with the pinctrl driver - some changes to the way Kconfig options are selected Richard Fitzgerald (18): mfd: madera: Add register definitions for Cirrus Logic Madera codecs mfd: madera: Add common support for Cirrus Logic Madera codecs dt-bindings: mfd: Add bindings for Cirrus Logic Madera codecs mfd: madera: Register map tables for Cirrus Logic CS47L35 mfd: madera: Register map tables for Cirrus Logic CS47L85 mfd: madera: Register map tables for Cirrus Logic CS47L90/91 regulator: arizona-micsupp: Add support for Cirrus Logic Madera codecs regulator: arizona-ldo1: Add support for Cirrus Logic Madera codecs irqchip: Add driver for Cirrus Logic Madera codecs pinctrl: madera: Add driver for Cirrus Logic Madera codecs dt-bindings: pinctrl: Add bindings for Cirrus Logic Madera codecs gpio: madera: Support Cirrus Logic Madera class codecs dt-bindings: gpio: Add bindings for GPIO on Cirrus Logic Madera codecs ASoC: madera: Add common support for Cirrus Logic Madera codecs dt-bindings: sound: Add bindings for Cirrus Logic Madera codecs ASoC: cs47l35: Add codec driver for Cirrus Logic CS47L35 ASoC: cs47l85: Add codec driver for Cirrus Logic CS47L85 ASoC: cs47l90: Add codec driver for Cirrus Logic CS47L90 .../devicetree/bindings/gpio/gpio-madera.txt | 27 + Documentation/devicetree/bindings/mfd/madera.txt | 96 + .../bindings/pinctrl/cirrus,madera-pinctrl.txt | 102 + .../bindings/regulator/arizona-regulator.txt | 3 +- Documentation/devicetree/bindings/sound/madera.txt | 66 + MAINTAINERS | 24 + drivers/gpio/Kconfig | 6 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-madera.c | 196 + drivers/irqchip/Kconfig | 3 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-madera.c | 349 + drivers/mfd/Kconfig | 50 + drivers/mfd/Makefile | 13 + drivers/mfd/cs47l35-tables.c | 1688 ++++ drivers/mfd/cs47l85-tables.c | 3169 +++++++ drivers/mfd/cs47l90-tables.c | 2830 +++++++ drivers/mfd/madera-core.c | 635 ++ drivers/mfd/madera-i2c.c | 131 + drivers/mfd/madera-spi.c | 132 + drivers/mfd/madera.h | 52 + drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/cirrus/Kconfig | 15 + drivers/pinctrl/cirrus/Makefile | 11 + drivers/pinctrl/cirrus/pinctrl-cs47l35.c | 46 + drivers/pinctrl/cirrus/pinctrl-cs47l85.c | 60 + drivers/pinctrl/cirrus/pinctrl-cs47l90.c | 58 + drivers/pinctrl/cirrus/pinctrl-madera.c | 1106 +++ drivers/pinctrl/cirrus/pinctrl-madera.h | 40 + drivers/regulator/Kconfig | 15 +- drivers/regulator/arizona-ldo1.c | 82 +- drivers/regulator/arizona-micsupp.c | 71 +- include/dt-bindings/sound/madera.h | 18 + include/linux/irqchip/irq-madera-pdata.h | 19 + include/linux/irqchip/irq-madera.h | 96 + include/linux/mfd/madera/core.h | 180 + include/linux/mfd/madera/pdata.h | 61 + include/linux/mfd/madera/registers.h | 8832 ++++++++++++++++++++ include/sound/madera-pdata.h | 58 + sound/soc/codecs/Kconfig | 23 + sound/soc/codecs/Makefile | 8 + sound/soc/codecs/cs47l35.c | 1747 ++++ sound/soc/codecs/cs47l85.c | 2706 ++++++ sound/soc/codecs/cs47l90.c | 2645 ++++++ sound/soc/codecs/madera.c | 4430 ++++++++++ sound/soc/codecs/madera.h | 470 ++ 47 files changed, 32363 insertions(+), 10 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/gpio-madera.txt create mode 100644 Documentation/devicetree/bindings/mfd/madera.txt create mode 100644 Documentation/devicetree/bindings/pinctrl/cirrus,madera-pinctrl.txt create mode 100644 Documentation/devicetree/bindings/sound/madera.txt create mode 100644 drivers/gpio/gpio-madera.c create mode 100644 drivers/irqchip/irq-madera.c create mode 100644 drivers/mfd/cs47l35-tables.c create mode 100644 drivers/mfd/cs47l85-tables.c create mode 100644 drivers/mfd/cs47l90-tables.c create mode 100644 drivers/mfd/madera-core.c create mode 100644 drivers/mfd/madera-i2c.c create mode 100644 drivers/mfd/madera-spi.c create mode 100644 drivers/mfd/madera.h create mode 100644 drivers/pinctrl/cirrus/Kconfig create mode 100644 drivers/pinctrl/cirrus/Makefile create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l35.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l85.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-cs47l90.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.c create mode 100644 drivers/pinctrl/cirrus/pinctrl-madera.h create mode 100644 include/dt-bindings/sound/madera.h create mode 100644 include/linux/irqchip/irq-madera-pdata.h create mode 100644 include/linux/irqchip/irq-madera.h create mode 100644 include/linux/mfd/madera/core.h create mode 100644 include/linux/mfd/madera/pdata.h create mode 100644 include/linux/mfd/madera/registers.h create mode 100644 include/sound/madera-pdata.h create mode 100644 sound/soc/codecs/cs47l35.c create mode 100644 sound/soc/codecs/cs47l85.c create mode 100644 sound/soc/codecs/cs47l90.c create mode 100644 sound/soc/codecs/madera.c create mode 100644 sound/soc/codecs/madera.h -- 1.9.1

8 49

[alsa-devel] [PATCH v8 0/5] Add platform clock for BayTrail platforms
by Pierre-Louis Bossart 10 Jul '17

10 Jul '17

These patches specifically enable the audio MCLK required by Baytrail CR devices. It is the remaining part of a bigger set of patches (already merged in Mark Brown's tree) that enable sound for Baytrail CR devices (especially Asus T100TAF) [1]. They include the clock driver and clock enabling in the pmc_atom code (along with moving of the non-architectural pmc_atom driver code into drivers/platform/x86 as suggested by Thomas Gleixner [2]). This move includes a new header in include/linux/platform_data/x86/. While there is an agreement that the definitions for PMC clocks are not really platform data this location is seen as a good-enough compromise with an agreement between Darren Hart and Andy Shevchenko [3] [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/111704.html [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-October/113936.ht… [3] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-December/115892.h… Changes from v7: - Replaced clk-readl/writel by regular readl/writel - Fixed two nitpick comments (newline and driver name string) - Fixed [5:0] to [0..5] in comment (missed in v6) Changes from v6: - Addressed comments from Stephen Boyd, Andy Shevchenko and Vinod Koul - Renamed clk-byt-plt to clk-pmc-atom - Rebase to 4.10-rc3 (broonie/for-next) - Added helper functions to make error handling more compact - Removed module-related code since it's not possible/supported - Removed useless tests on remove - PMC_CLK_OFFSET move to clk-pcm-atom (more logical) - Split typo correction and makefile fix in separate patches - small fixes (spaces, defaults in switches, alphabetical order, use of clk_writel/readl and no test on write, simpler error handling, use of while(i--), unsigned loop variables, kernel doc fields, format-patch -M -C -D, use of PLATFORM_DEVID_NONE) Changes from v5: - fix build error reported by kbuild test robot - split the clk driver code from x86 platform changes Changes from v4: - move the pmc_atom driver from arch/x86/platform/atom to drivers/platform/x86 Changes from v3: - replace devm_kzalloc with devm_kcalloc - add x86 architecture maintainers Changes from v2: - move clk platform data structures to a separate include file - store clk_hw pointer for the fixed rate clocks Changes from v1: - register the clk device as child of pmc device - pass iomem pointer from pmc driver to clk driver to avoid using pmc_atom_read()/write() and use readl/writel API instead - use devm_clk_hw_register/clkdev_hw_create instead of clk_register/clkdev_create Irina Tirdea (3): clk: x86: Add Atom PMC platform clocks arch/x86/platform/atom: Move pmc_atom to drivers/platform/x86 platform/x86: Enable Atom PMC platform clocks Pierre-Louis Bossart (2): clk: Make x86/ conditional on CONFIG_COMMON_CLK platform/x86: fix typo in comment arch/x86/Kconfig | 4 - arch/x86/platform/atom/Makefile | 1 - drivers/acpi/acpi_lpss.c | 2 +- drivers/clk/Makefile | 2 + drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-pmc-atom.c | 371 +++++++++++++++++++++ drivers/platform/x86/Kconfig | 5 + drivers/platform/x86/Makefile | 1 + .../atom => drivers/platform/x86}/pmc_atom.c | 88 ++++- include/linux/platform_data/x86/clk-pmc-atom.h | 44 +++ .../linux/platform_data/x86}/pmc_atom.h | 2 +- 11 files changed, 506 insertions(+), 15 deletions(-) create mode 100644 drivers/clk/x86/clk-pmc-atom.c rename {arch/x86/platform/atom => drivers/platform/x86}/pmc_atom.c (87%) create mode 100644 include/linux/platform_data/x86/clk-pmc-atom.h rename {arch/x86/include/asm => include/linux/platform_data/x86}/pmc_atom.h (98%) -- 2.7.4

4 11

[alsa-devel] additional high input device for snd-dice (A&H Zed R16)
by Allan Klinbail 26 Jun '17

26 Jun '17

Hi, I noticed on the changelog that some devices are able to access all channels without doing any .asoundrc funkiness. Form 4.6 kernel onwards - Add support for previously unavailable higher PCM channels on certain devices with high channel count, notably Focusrite Saffire PRO 40, Focusrite Liquid Saffire 56, and TC Electronic Studio Konnekt 48. These devices spread the PCM and MIDI channels across 2 tx + 2 rx IEEE 1394 channels instead of just 1 tx + 1 rx IEEE 1394 channel, as most other devices do. Pretty sure I've tested with 4.6 and wasn't able to achieve this with my device. But can test again with 4.8 if I am wrong. My device is an Allen and Heath Zed R16.. While latency performance in the way ALSA works is not satisfactory for my usage others may wish to use this device with ALSA for simplicity. (remove the need for FFADO entirely as there is no software mixer for this device and remove the need for any MIDI bridge) Currently under ALSA in 44.1k or 48k the device has 16 inputs and 16 outputs on the first firewire channel, and then and additional 10 ins and 10 outs on the second. If this is any help, here is the vendor info, as used by FFADO { # Allen and Heath Zed R16. Information from Brendan Pike. vendorid = 0x000004C4; modelid = 0x00000000; vendorname = "Allen and Heath"; modelname = "Zed R16"; driver = "DICE"; mixer = "Generic_Dice_EAP"; } On that latency topic- just voicing my opinion and I don't expect change. When the paradigm of using periods/frames and buffers is common across all OS and driver platforms, I don't believe that the driver should force developers to implement a new method, even if there are better ways of doing things. That might be okay for small open source projects, but bigger commercial applications would not be likely to maintain separate configuration options for Linux, they are more likely to drop Linux altogether if forced to adopt I also know that Takashi S, does not agree but as FFADO devs have agreed to keep the driver in FFADO I don't mind..

2 3

Re: [alsa-devel] Dell USB audio driver workaround
by Takashi Iwai 21 Jun '17

21 Jun '17

On Wed, 06 Apr 2016 08:29:12 +0200, Kailang wrote: > > Hi Takashi, > > Dell had USB dock. > Maybe firmware issue, the master volume always keep at 0x57. > Attach patch will fix it to keep at Max volume. > > Could you help us to update it? Well, I don't get how this patch works.. > diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c > index 4f85757..84d9a4e 100644 > --- a/sound/usb/mixer.c > +++ b/sound/usb/mixer.c > @@ -846,6 +846,12 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, > { > struct snd_usb_audio *chip = cval->head.mixer->chip; > switch (chip->usb_id) { > + case USB_ID(0x0bda, 0x4014): /* Dell workaround */ > + if (strstr(kctl->id.name, "Playback Volume") != NULL) { > + cval->min = 0x0000; > + cval->max = 0x0000; > + } > + break; So, this means that this value has to be fixed to 0? If yes, can't we simply remove this volume instead? thanks, Takashi

4 16

[alsa-devel] [PATCH 0/3] ASoC: rsnd: fixup Ctrl-Z + fg behavior
by Kuninori Morimoto 13 Jun '17

13 Jun '17

Hi Mark Current rsnd driver has strange behavior if we do Ctrl-Z + fg, and its related operation. These patches fix these issues. Kuninori Morimoto (3): ASoC: rsnd: tidyup src->convert_rate reset timing ASoC: rsnd: merge rsnd_kctrl_new_m/s/e into rsnd_kctrl_new() ASoC: rsnd: control kctrl items acceptance anytime/runtime sound/soc/sh/rcar/core.c | 113 +++++++++++++++++++++-------------------------- sound/soc/sh/rcar/ctu.c | 6 +++ sound/soc/sh/rcar/dvc.c | 13 ++++-- sound/soc/sh/rcar/rsnd.h | 54 +++++++++++----------- sound/soc/sh/rcar/src.c | 5 ++- 5 files changed, 97 insertions(+), 94 deletions(-) -- 1.9.1

2 8