March 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v3 00/11] Add STM32 DFSDM support
by Arnaud Pouliquen 11 Sep '17

11 Sep '17

Hello, I kept it as RFC as i reworked the global design (but also because not full validated...). Regarding Mark and Jonathan's comments, I decided to try an implementation with DMA support in IIO instead of handling it in ASOC. Solution seems more straightforward but as DMA cyclic mode and associated buffer block API is not part of IIO today, I still need some hacks... To be honest, I tried to integrate DMA cyclic management and associated buffer block Consumer API. but no enough expertise on IIO to success... :( Advantage vs V2: - No more data processing need in ASoC , done in IIO - ASoC uses IIO consumer interface ( except for buffer callback) Drawback : - Need to create a "SPI bus" trigger to allo to use Buffer consumer API => Need to find a solution to set this trigger by default in IIO audio driver - No standard buffer management - Implement DMA cyclic in DFSDM IIO driver. - Define specific API to handle buffer callback per period instead of callback per samples generated by iio_push_to_buffers_with_timestamp. V2-V3 delta: - New patches to support ASoC DMA codec in DT - ASoC: Add Bindins for DMIC codec driver. - ASoC: codec: add DT support in dmic codec. - New patches to allow in-kernel set of IIO buffer size and watermark - IIO: consumer: allow to set buffer sizes. - IIO DFSDM drivers - Split audio and ADC support in 2 drivers. - Implement DMA cyclic mode. - Add SPI bus Trigger for buffer management. - IIO sigma delta adc drivers - Suppress "simple and rename driver. - ASoC driver - Suppress DMA engine. - Suppress copy ops. - Use IIO consmumer interface to enable/Disable DFSDM. Regards, Arnaud Arnaud Pouliquen (11): iio: Add hardware consumer support IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM support for Sigma delta ADC IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: Add Bindins for DMIC codec driver ASoC: codec: add DT support in dmic codec ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 120 ++++ Documentation/devicetree/bindings/sound/dmic.txt | 11 + .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 41 ++ drivers/iio/Kconfig | 6 + drivers/iio/Makefile | 1 + drivers/iio/adc/Kconfig | 50 ++ drivers/iio/adc/Makefile | 4 + drivers/iio/adc/sd_adc_modulator.c | 98 +++ drivers/iio/adc/stm32-dfsdm-adc.c | 419 ++++++++++++ drivers/iio/adc/stm32-dfsdm-audio.c | 720 +++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 658 +++++++++++++++++++ drivers/iio/adc/stm32-dfsdm.h | 372 +++++++++++ drivers/iio/buffer/industrialio-buffer-cb.c | 12 + drivers/iio/hw_consumer.c | 156 +++++ include/linux/iio/adc/stm32-dfsdm-audio.h | 41 ++ include/linux/iio/consumer.h | 13 + include/linux/iio/hw_consumer.h | 12 + sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + sound/soc/codecs/dmic.c | 8 + sound/soc/stm/Kconfig | 10 + sound/soc/stm/Makefile | 2 + sound/soc/stm/stm32_adfsdm.c | 362 +++++++++++ 24 files changed, 3131 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/dmic.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-audio.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/hw_consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-audio.h create mode 100644 include/linux/iio/hw_consumer.h create mode 100644 sound/soc/stm/Kconfig create mode 100644 sound/soc/stm/Makefile create mode 100644 sound/soc/stm/stm32_adfsdm.c V2: Patch-set associated to this RFC proposes an implementation of the DFSDM features shared between ASoC and IIO frameworks. Patch-set is only a Skeleton of the drivers, so a base to discuss and validate a design. It contains minimum code to allow probing (with DT) and to expose the ASoC and IIO ABI. Hope that is sufficent in a first step to allow to focus on APIs. In this patch-set there are two new APIs used: - IIO in-kern API: based on hw_customer API proposed by Lars - ASOC <-> IIO API inspired by API defined for hdmi-codec for ASoC/DRM interconnect. API is dedicated to DFSDM only. Notice also that this design is based on following assumption: - Audio stream ABI interface is ASoC, no access to data through IIO ABI for PDM. - ASoC DMA should be used for audio transfer as designed for real time stream. - Need some runtime parameters exchange between ASoC and IIO due to the correlation between the sample frequency, the DFSDM decimation factor and the associated scaling. - "ASoC: dmaengine_pcm: add copy support" patch: I added a patch in ASoC that allows to implement a copy function to process data after DMA transfer. Requested, as DFSDM samples captured contain channel ID on 8-LSB bits and need also a potential rescale to present DAT on 24-bits. - "IIO: ADC: add sigma delta modulator support" patch: Simple dummy driver created to support external Sigma delta modulator. It is binded to DFSDM driver through hw_customer API. - 1.9.1

5 35

[alsa-devel] [RFC PATCH 0/7] AC97 device/driver model revamp
by Robert Jarzmik 04 Sep '17

04 Sep '17

It all started in the pxa device-tree submission here : https://lkml.org/lkml/2016/2/25/965 It will be maintained in : git fetch https://github.com/rjarzmik/linux.git work/ac97 And now it transformed into this RFC, which would bring a ground for AC'97 devices closer to the linux device/driver model. This is just an RFC to see if we understand each other Mark. Amongst the driving ideas behind this RFC : - use device/driver model for AC'97 device/driver binding is based on vendor_id{1,2} - use auto-probe of the AC'97 bus to enumerate codecs and create devices - be compatible with previous platform_data model for codecs => this enables a smooth transition, where a codec (here wm9713) can be used either through platform_device or automatic discovery - struct snd_ac97 is not used This structure is really heavy, and doesn't represent an AC97 device, but rather an AC'97 codec internals IIUC. I think it's right place would be in include/sound/ac97/codec.h. This is also a problem for regmap adherence, hence the include/sound/ac97/compat.h. - a new AC'97 bus Kconfig is created This was done for a smooth transition ... let's see if it's a good idea. - split the AC'97 into : - the codec - the digital controller - the bus Amongst the things that are not all touched yet : - ac97_codec.c The generic AC'97 codec in sound/pci/ac97/ac97_codec.c has really a lot features, which are not at all PCI related. They could be transfered to sound/ac97, without the pci specific field. => this deserves a deep ahead thinking, which I'll do if the current approach is accepted by the communauty. The most important patch is 2/7 "ALSA: ac97: add an ac97 bus". This is the main evaluation point for the serie, the others are here so that I can test it all. Well, this is a long term effort, which might need a complete rewrite according to the comments it'll get. Let's expose it for comments and see how I can progress with it. Cheers. -- Robert Robert Jarzmik (7): ALSA: ac97: split out the generic ac97 registers ALSA: ac97: add an ac97 bus ASoC: wm9713: add ac97 new bus support ASoC: pxa: switch to new ac97 bus support ARM: pxa: mioa701 remove wm9713 from platform devices ASoC: mioa701_wm9713: convert to new ac97 bus ASoC: add new ac97 bus support arch/arm/mach-pxa/mioa701.c | 1 - include/sound/ac97/codec.h | 98 ++++++++++++ include/sound/ac97/compat.h | 21 +++ include/sound/ac97/controller.h | 39 +++++ include/sound/ac97/regs.h | 262 +++++++++++++++++++++++++++++++ include/sound/ac97_codec.h | 239 +---------------------------- include/sound/pxa2xx-lib.h | 14 +- sound/Kconfig | 7 + sound/Makefile | 1 + sound/ac97/Kconfig | 9 ++ sound/ac97/Makefile | 5 + sound/ac97/ac97_core.h | 10 ++ sound/ac97/bus.c | 330 ++++++++++++++++++++++++++++++++++++++++ sound/ac97/codec.c | 15 ++ sound/ac97/snd_ac97_compat.c | 104 +++++++++++++ sound/arm/Kconfig | 1 - sound/arm/pxa2xx-ac97-lib.c | 31 ++-- sound/soc/Kconfig | 4 + sound/soc/codecs/wm9713.c | 62 +++++++- sound/soc/pxa/Kconfig | 4 +- sound/soc/pxa/mioa701_wm9713.c | 4 +- sound/soc/pxa/pxa2xx-ac97.c | 12 +- 22 files changed, 1000 insertions(+), 273 deletions(-) create mode 100644 include/sound/ac97/codec.h create mode 100644 include/sound/ac97/compat.h create mode 100644 include/sound/ac97/controller.h create mode 100644 include/sound/ac97/regs.h create mode 100644 sound/ac97/Kconfig create mode 100644 sound/ac97/Makefile create mode 100644 sound/ac97/ac97_core.h create mode 100644 sound/ac97/bus.c create mode 100644 sound/ac97/codec.c create mode 100644 sound/ac97/snd_ac97_compat.c -- 2.1.4

3 29

[alsa-devel] [PATCH] ASoC: spear: Remove redundant message
by dspmihai 10 Aug '17

10 Aug '17

This was reported by checkpatch.pl Signed-off-by: Despotovici Mihai <despotovici.mihai(a)gmail.com> --- sound/soc/spear/spdif_in.c | 4 +--- sound/soc/spear/spdif_out.c | 4 +--- 2 files changed, 2 insertions(+), 6 deletions(-) diff --git a/sound/soc/spear/spdif_in.c b/sound/soc/spear/spdif_in.c index 977a078..0f3b1a8 100644 --- a/sound/soc/spear/spdif_in.c +++ b/sound/soc/spear/spdif_in.c @@ -216,10 +216,8 @@ static int spdif_in_probe(struct platform_device *pdev) return -EINVAL; host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_warn(&pdev->dev, "kzalloc fail\n"); + if (!host) return -ENOMEM; - } host->io_base = io_base; host->irq = platform_get_irq(pdev, 0); diff --git a/sound/soc/spear/spdif_out.c b/sound/soc/spear/spdif_out.c index 0a72d52..58d5843 100644 --- a/sound/soc/spear/spdif_out.c +++ b/sound/soc/spear/spdif_out.c @@ -282,10 +282,8 @@ static int spdif_out_probe(struct platform_device *pdev) int ret; host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); - if (!host) { - dev_warn(&pdev->dev, "kzalloc fail\n"); + if (!host) return -ENOMEM; - } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); host->io_base = devm_ioremap_resource(&pdev->dev, res); -- 2.7.4

3 2

[alsa-devel] [PATCH v8 0/5] Add platform clock for BayTrail platforms
by Pierre-Louis Bossart 10 Jul '17

10 Jul '17

These patches specifically enable the audio MCLK required by Baytrail CR devices. It is the remaining part of a bigger set of patches (already merged in Mark Brown's tree) that enable sound for Baytrail CR devices (especially Asus T100TAF) [1]. They include the clock driver and clock enabling in the pmc_atom code (along with moving of the non-architectural pmc_atom driver code into drivers/platform/x86 as suggested by Thomas Gleixner [2]). This move includes a new header in include/linux/platform_data/x86/. While there is an agreement that the definitions for PMC clocks are not really platform data this location is seen as a good-enough compromise with an agreement between Darren Hart and Andy Shevchenko [3] [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-August/111704.html [2] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-October/113936.ht… [3] http://mailman.alsa-project.org/pipermail/alsa-devel/2016-December/115892.h… Changes from v7: - Replaced clk-readl/writel by regular readl/writel - Fixed two nitpick comments (newline and driver name string) - Fixed [5:0] to [0..5] in comment (missed in v6) Changes from v6: - Addressed comments from Stephen Boyd, Andy Shevchenko and Vinod Koul - Renamed clk-byt-plt to clk-pmc-atom - Rebase to 4.10-rc3 (broonie/for-next) - Added helper functions to make error handling more compact - Removed module-related code since it's not possible/supported - Removed useless tests on remove - PMC_CLK_OFFSET move to clk-pcm-atom (more logical) - Split typo correction and makefile fix in separate patches - small fixes (spaces, defaults in switches, alphabetical order, use of clk_writel/readl and no test on write, simpler error handling, use of while(i--), unsigned loop variables, kernel doc fields, format-patch -M -C -D, use of PLATFORM_DEVID_NONE) Changes from v5: - fix build error reported by kbuild test robot - split the clk driver code from x86 platform changes Changes from v4: - move the pmc_atom driver from arch/x86/platform/atom to drivers/platform/x86 Changes from v3: - replace devm_kzalloc with devm_kcalloc - add x86 architecture maintainers Changes from v2: - move clk platform data structures to a separate include file - store clk_hw pointer for the fixed rate clocks Changes from v1: - register the clk device as child of pmc device - pass iomem pointer from pmc driver to clk driver to avoid using pmc_atom_read()/write() and use readl/writel API instead - use devm_clk_hw_register/clkdev_hw_create instead of clk_register/clkdev_create Irina Tirdea (3): clk: x86: Add Atom PMC platform clocks arch/x86/platform/atom: Move pmc_atom to drivers/platform/x86 platform/x86: Enable Atom PMC platform clocks Pierre-Louis Bossart (2): clk: Make x86/ conditional on CONFIG_COMMON_CLK platform/x86: fix typo in comment arch/x86/Kconfig | 4 - arch/x86/platform/atom/Makefile | 1 - drivers/acpi/acpi_lpss.c | 2 +- drivers/clk/Makefile | 2 + drivers/clk/x86/Makefile | 1 + drivers/clk/x86/clk-pmc-atom.c | 371 +++++++++++++++++++++ drivers/platform/x86/Kconfig | 5 + drivers/platform/x86/Makefile | 1 + .../atom => drivers/platform/x86}/pmc_atom.c | 88 ++++- include/linux/platform_data/x86/clk-pmc-atom.h | 44 +++ .../linux/platform_data/x86}/pmc_atom.h | 2 +- 11 files changed, 506 insertions(+), 15 deletions(-) create mode 100644 drivers/clk/x86/clk-pmc-atom.c rename {arch/x86/platform/atom => drivers/platform/x86}/pmc_atom.c (87%) create mode 100644 include/linux/platform_data/x86/clk-pmc-atom.h rename {arch/x86/include/asm => include/linux/platform_data/x86}/pmc_atom.h (98%) -- 2.7.4

4 11

[alsa-devel] additional high input device for snd-dice (A&H Zed R16)
by Allan Klinbail 26 Jun '17

26 Jun '17

Hi, I noticed on the changelog that some devices are able to access all channels without doing any .asoundrc funkiness. Form 4.6 kernel onwards - Add support for previously unavailable higher PCM channels on certain devices with high channel count, notably Focusrite Saffire PRO 40, Focusrite Liquid Saffire 56, and TC Electronic Studio Konnekt 48. These devices spread the PCM and MIDI channels across 2 tx + 2 rx IEEE 1394 channels instead of just 1 tx + 1 rx IEEE 1394 channel, as most other devices do. Pretty sure I've tested with 4.6 and wasn't able to achieve this with my device. But can test again with 4.8 if I am wrong. My device is an Allen and Heath Zed R16.. While latency performance in the way ALSA works is not satisfactory for my usage others may wish to use this device with ALSA for simplicity. (remove the need for FFADO entirely as there is no software mixer for this device and remove the need for any MIDI bridge) Currently under ALSA in 44.1k or 48k the device has 16 inputs and 16 outputs on the first firewire channel, and then and additional 10 ins and 10 outs on the second. If this is any help, here is the vendor info, as used by FFADO { # Allen and Heath Zed R16. Information from Brendan Pike. vendorid = 0x000004C4; modelid = 0x00000000; vendorname = "Allen and Heath"; modelname = "Zed R16"; driver = "DICE"; mixer = "Generic_Dice_EAP"; } On that latency topic- just voicing my opinion and I don't expect change. When the paradigm of using periods/frames and buffers is common across all OS and driver platforms, I don't believe that the driver should force developers to implement a new method, even if there are better ways of doing things. That might be okay for small open source projects, but bigger commercial applications would not be likely to maintain separate configuration options for Linux, they are more likely to drop Linux altogether if forced to adopt I also know that Takashi S, does not agree but as FFADO devs have agreed to keep the driver in FFADO I don't mind..

2 3

Re: [alsa-devel] Dell USB audio driver workaround
by Takashi Iwai 21 Jun '17

21 Jun '17

On Wed, 06 Apr 2016 08:29:12 +0200, Kailang wrote: > > Hi Takashi, > > Dell had USB dock. > Maybe firmware issue, the master volume always keep at 0x57. > Attach patch will fix it to keep at Max volume. > > Could you help us to update it? Well, I don't get how this patch works.. > diff --git a/sound/usb/mixer.c b/sound/usb/mixer.c > index 4f85757..84d9a4e 100644 > --- a/sound/usb/mixer.c > +++ b/sound/usb/mixer.c > @@ -846,6 +846,12 @@ static void volume_control_quirks(struct usb_mixer_elem_info *cval, > { > struct snd_usb_audio *chip = cval->head.mixer->chip; > switch (chip->usb_id) { > + case USB_ID(0x0bda, 0x4014): /* Dell workaround */ > + if (strstr(kctl->id.name, "Playback Volume") != NULL) { > + cval->min = 0x0000; > + cval->max = 0x0000; > + } > + break; So, this means that this value has to be fixed to 0? If yes, can't we simply remove this volume instead? thanks, Takashi

4 16

[alsa-devel] Problems with the DP MST audio support patchset
by Pascal Wichmann 26 May '17

26 May '17

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Hello, I am not sure whether alsa-devel is the right place for this kind of question. If it is not, please tell me a better place for them. I am building my kernel against the drm-tip freedesktop repository which includes the patches from December 2016 (message id <1480992519-108079-1-git-send-email-libin.yang(a)intel.com> and follow-ups on alsa-devel). I am using a ThinkPad X250 and the ThinkPad Ultra Dock with the HDMI output connected to my YAMAHA HTR-2866; this hdmi output is seen as display port and uses DP MST from the dock. In principle, everything is working quite well; however, I frequently recognize two weird behaviours: * First of all, my audio receiver has 5.1 support. When I configure my laptop to send 5.1 audio using alsa or pulseaudio, there is only silence and no audio signal reaches the receiver; however, when I choose 7.1 digital surround (which my receiver actually does not suppo rt natively), everything works well and the two additional speakers are split to the existing ones (I do not know whether alsa/the kernel or the receiver does this, probably it is the receiver). This problem is pretty much only esthetical, as everything works fine if I use the 7.1 "work-around" (Digital Stereo does work also, but obviously does not support the full 5.1 setup) * The other problem -- which is actually very annoying -- is that there frequently is silence though there is audio playing; this happens now and then, but when there has been *no* output for a while, it always happens a few seconds after starting the new output and lasts for two to three seconds. During these periods of silence, the icons on my receiver indicating that there is an audio source are also gone. This problem occurs with 7.1 configuration as well as with Digital Stereo. I am not sure what these problems are caused by and do not know what kin d of debug information you may require to get more hints on how to solve them. Any hints are appreciated. Thank you for your advice, Pascal Wichmann -----BEGIN PGP SIGNATURE----- iQIzBAEBCAAdFiEE/gJ8Tpn0OtJz8hxD6+YIa34W/zYFAljbj5cACgkQ6+YIa34W /zbIVg//QP4A0wUE2MyaEAenN8nUpNV5ASglRTZ0N5hXBjD+B/sxIMkJdtSynlcB eBYL90ZLuFHxdfXsltifeY29D7CaHfyqQCeJUfzV+RgUGrlv0wqk2vA9Dfc+RTIT PBORlyuknqIV14z8vxMGO/1+Po/S8AFplK/QJs9Y+irGAX+CAhBMlVMt8V5rbL+e oD8KRWgPIwuYShhd0f3tmgqdhRn9RUQgBaYOaq1pXdI/nNDHZuRA021zytkkV4rR NGG2zOsgrrXo82ac1AAeUXlNczqUCM7UXNLjpVYUQQotEMZd9d6oL5/Iq/bD7Z8i Z+bzOWymzaaThqarc11UL9ngJr6JsDNXgdDrLgLbkSE1r6Knq66qzOmzZL7qeUDI 1JeCNkmztn82VLovRogQTY8p8Ye7gXwVUPNDocCoeBKgRA6u2VGs+zJljCDOiyT9 cCA+QGMpRMz+KLt82Bt5/vE6TzngUEOZli34wNhf6DaHYo+0j4TpiCZT3roIVlp+ C+tPvDsbt9SfVLKvmoDCKAS8o5wp7+jESAsTEMzssBeN6LYKTWeAJeZHymf17ckb Y3oub8Wk5bEvZh0AO5q7wqdWMLuTc9BSmJ8eJA0jNV+m9sGKxaTB/qFMfNoJjfFD yvBBeYvic0btTtOiQAPEia1igNR9vt1hpj5wCI6xNQwSekM1bOQ= =/6Dp -----END PGP SIGNATURE-----

4 13

[alsa-devel] [PATCH] base: export symbol of_phandle_iterator_init/next
by Kuninori Morimoto 17 May '17

17 May '17

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> of_for_each_phandle() uses of_phandle_iterator_init/next but these aren't exported. So kernel module complile will say ERROR: "of_phandle_iterator_init" [xxx.ko] undefined! ERROR: "of_phandle_iterator_next" [xxx.ko] undefined! This patch solves this issue Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- This patch is related to this patch-set Subject: [PATCH v5 0/9] ASoC: add OF-graph base simple-card Date: Tue, 21 Mar 2017 14:17:03 +0900 drivers/of/base.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/of/base.c b/drivers/of/base.c index 812edb9..bc42f91 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1570,6 +1570,7 @@ int of_phandle_iterator_init(struct of_phandle_iterator *it, return 0; } +EXPORT_SYMBOL_GPL(of_phandle_iterator_init); int of_phandle_iterator_next(struct of_phandle_iterator *it) { @@ -1639,6 +1640,7 @@ int of_phandle_iterator_next(struct of_phandle_iterator *it) return -EINVAL; } +EXPORT_SYMBOL_GPL(of_phandle_iterator_next); int of_phandle_iterator_args(struct of_phandle_iterator *it, uint32_t *args, -- 1.9.1

2 1

[alsa-devel] [PATCH 0/7] of_graph: prepare for ALSA graph support
by Kuninori Morimoto 17 May '17

17 May '17

Hi Rob, Mark Cc Guennadi, Laurent Now OF graph is mainly used by V4L2 SoC, and ALSA SoC is using different style for SoC <-> Codec binding. But, for example, HDMI case, V4L2 <-> ALSA need to collaborate, and then ALSA SoC needs to adjust to OF graph. OTOH, V4L2's "OF graph" position is same as ALSA SoC "sound card" position. And ALSA SoC side want to keep existing supported feature on new OF graph style. I'm posting this on ALSA SoC ML now. Now, current of_graph is indicating port/endpoint, but there is no way to understand that it is for video port ? or sound port ? or other device port ? For example, HDMI has video port, and sound port. Because of this reason, ALSA SoC side can't handle OF graph correctly. Thus, this patch-set tries to add new "type" on OF graph. And this patch-set includes small feature which are useful for ALSA SoC side OF graph support. Kuninori Morimoto (7): Documentation: of: add type property of_graph: add of_graph_get_remote_endpoint() of_graph: add of_graph_port/endpoint_type_is() of_graph: add of_graph_get_endpoint_count() of_graph: add of_graph_get_port_parent() of_graph: add of_graph_get_top_port() of_graph: add for_each_of_port() / for_each_of_endpoint_in_port() Documentation/devicetree/bindings/graph.txt | 26 ++++ drivers/of/base.c | 196 ++++++++++++++++++++++++++-- include/linux/of_graph.h | 67 ++++++++++ 3 files changed, 279 insertions(+), 10 deletions(-) -- 1.9.1

3 12

[alsa-devel] [PATCH v4 0/9] ASoC: add OF-graph base simple-card
by Kuninori Morimoto 17 May '17

17 May '17

Hi Rob, Mark These are v4 of OF-graph base audio card patch-set. Main difference from v3 is that it doesn't have prefix on DT, and have new "label", "dai-format". 1) - 3) : new OF-graph helper functions 4) - 5) : expand "label", "dai-format" 6) - 9) : OF-graph base simple-card Kuninori Morimoto (9): 1) of_graph: add of_graph_get_remote_endpoint() 2) of_graph: add of_graph_get_port_parent() 3) of_graph: add of_graph_get_endpoint_count() 4) ASoC: simple-card-utils: enable "label" on asoc_simple_card_parse_card_name 5) ASoC: soc-core: enable "dai-name" on snd_soc_of_parse_daifmt() 6) ASoC: add snd_soc_get_dai_id() 7) ASoC: simple-card-utils: add asoc_simple_card_parse_graph_dai() 8) ASoC: add audio-graph-card document 9) ASoC: add audio-graph-card support .../devicetree/bindings/sound/audio-graph-card.txt | 124 +++++++++ .../devicetree/bindings/sound/simple-card.txt | 3 +- .../devicetree/bindings/sound/simple-scu-card.txt | 4 +- drivers/of/base.c | 60 +++- include/linux/of_graph.h | 21 ++ include/sound/simple_card_utils.h | 10 + include/sound/soc.h | 1 + sound/soc/generic/Kconfig | 8 + sound/soc/generic/Makefile | 2 + sound/soc/generic/audio-graph-card.c | 301 +++++++++++++++++++++ sound/soc/generic/simple-card-utils.c | 54 +++- sound/soc/soc-core.c | 32 ++- 12 files changed, 602 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-card.txt create mode 100644 sound/soc/generic/audio-graph-card.c -- 1.9.1

4 25