December 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v6 0/6] TDA1997x HDMI video receiver
by Tim Harvey 01 Feb '18

01 Feb '18

This is a v4l2 subdev driver supporting the TDA1997x HDMI video receiver. I've tested this on a Gateworks GW54xx/GW551x with an IMX6Q/IMX6DL which uses the TDA19971 with 16bits connected to the IMX6 CSI and single-lane I2S audio providing 2-channel audio. For this configuration I've tested both 16bit YUV422 and 8bit BT656 parallel video bus modes. While the driver should support the TDA1993 I do not have one for testing. Further potential development efforts include: - CEC support - HDCP support - mbus format selection support for bus widths that support multiple formats - TDA19972 support (2 inputs) Media graphs can be found at http://dev.gateworks.com/docs/linux/media History: v6: - tda1997x: fix return on regulator enablei in tda1997x_set_power() (Fabio) - tda1997x: fix colorspace handling (Hans) - bindings: added Robs's ack (Rob) - replace copyright with SPDX tag (Philippe) v5: - added v4l2_hdmi_colorimetry() patch from Hans to series - bindings: added Sakari's ack - tda1997x: uppercase string constants - tda1997x: use v4l2_hdmi_rx_coloriemtry to fill format - tda1997x: fix V4L2_CID_DV_RX_RGB_RANGE - tda1997x: fix interlaced mode format - dts: remove leading 0 from unit address - dts: add newline between property list and child node - dts: added missing audmux in GW551x dts v4: - move include/dt-bindings/media/tda1997x.h to bindings patch - clarify port node details in bindings - fix typos - fix default quant range for VGA - fix quant range handling and conv matrix - add additional standards and capabilities to timings_cap v3: - fix typo in dt bindings - added dt bindings for GW551x - use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros - fixed missing break - use only hdmi_infoframe_log for infoframe logging - simplify tda1997x_s_stream error handling - add delayed work proc to handle hotplug enable/disable - fix set_edid (disable HPD before writing, enable after) - remove enabling edid by default - initialize timings - take quant range into account in colorspace conversion - remove vendor/product tracking (we provide this in log_status via infoframes) - add v4l_controls - add more detail to log_status - calculate vhref generator timings - timing detection fixes (rounding errors, hswidth errors) - rename configure_input/configure_conv functions v2: - encorporate feedback into dt bindings - change audio dt bindings - implement dv timings enum/cap - remove deprecated g_mbus_config op - fix dv_query_timings - add EDID get/set handling - remove max-pixel-rate support - add audio codec DAI support - added media-ctl and v4l2-compliance details v1: - initial RFC Media device topology: # media-ctl -d /dev/media0 -p Media controller API version 4.13.0 Media device information ------------------------ driver imx-media model imx-media serial bus info hw revision 0x0 driver version 4.13.0 Device topology - entity 1: adv7180 2-0020 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 20004 device node name /dev/v4l-subdev0 pad0: Source [fmt:UYVY8_2X8/720x480 field:interlaced colorspace:smpte170m] -> "ipu2_csi1_mux":1 [] - entity 3: tda19971 2-0048 (1 pad, 1 link) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev1 pad0: Source [fmt:UYVY8_1X16/640x480 field:none colorspace:srgb] [dv.caps:BT.656/1120 min:640x480@13000000 max:1920x1080@165000000 stds:CEA-861,DMT caps:progressive] [dv.detect:BT.656/1120 640x480p59 (800x525) stds:CEA-861,DMT flags:has-cea861-vic] [dv.current:BT.656/1120 1920x1080p60 (2200x1125) stds:CEA-861,DMT flags:can-reduce-fps,CE-video,has-cea861-vic] -> "ipu1_csi0_mux":1 [] - entity 5: ipu1_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev2 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] - entity 9: ipu2_vdic (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev3 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] pad2: Source [fmt:AYUV8_1X32/640x480@1/60 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] - entity 13: ipu1_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev4 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_vdic":2 [] <- "ipu1_csi0":1 [] <- "ipu1_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf":0 [] - entity 17: ipu1_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev5 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpenc capture":0 [] - entity 20: ipu1_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video0 pad0: Sink <- "ipu1_ic_prpenc":1 [] - entity 26: ipu1_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev6 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu1_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prpvf capture":0 [] - entity 29: ipu1_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video1 pad0: Sink <- "ipu1_ic_prpvf":1 [] - entity 35: ipu2_ic_prp (3 pads, 5 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev7 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_vdic":2 [] <- "ipu2_csi0":1 [] <- "ipu2_csi1":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf":0 [] - entity 39: ipu2_ic_prpenc (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev8 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":1 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpenc capture":0 [] - entity 42: ipu2_ic_prpenc capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video2 pad0: Sink <- "ipu2_ic_prpenc":1 [] - entity 48: ipu2_ic_prpvf (2 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev9 pad0: Sink [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] <- "ipu2_ic_prp":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prpvf capture":0 [] - entity 51: ipu2_ic_prpvf capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video3 pad0: Sink <- "ipu2_ic_prpvf":1 [] - entity 57: ipu1_csi0 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev10 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu1_csi0_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi0 capture":0 [] - entity 61: ipu1_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video4 pad0: Sink <- "ipu1_csi0":2 [] - entity 67: ipu1_csi1 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev11 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_ic_prp":0 [] -> "ipu1_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu1_csi1 capture":0 [] - entity 71: ipu1_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video5 pad0: Sink <- "ipu1_csi1":2 [] - entity 77: ipu2_csi0 (3 pads, 3 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev12 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi0 capture":0 [] - entity 81: ipu2_csi0 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video6 pad0: Sink <- "ipu2_csi0":2 [] - entity 87: ipu2_csi1 (3 pads, 4 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev13 pad0: Sink [fmt:UYVY8_2X8/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range crop.bounds:(0,0)/640x480 crop:(0,0)/640x480 compose.bounds:(0,0)/640x480 compose:(0,0)/640x480] <- "ipu2_csi1_mux":2 [] pad1: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_ic_prp":0 [] -> "ipu2_vdic":0 [] pad2: Source [fmt:AYUV8_1X32/640x480@1/30 field:none colorspace:smpte170m xfer:709 ycbcr:601 quantization:lim-range] -> "ipu2_csi1 capture":0 [] - entity 91: ipu2_csi1 capture (1 pad, 1 link) type Node subtype V4L flags 0 device node name /dev/video7 pad0: Sink <- "ipu2_csi1":2 [] - entity 97: ipu1_csi0_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev14 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "tda19971 2-0048":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu1_csi0":0 [] - entity 101: ipu2_csi1_mux (3 pads, 2 links) type V4L2 subdev subtype Unknown flags 0 device node name /dev/v4l-subdev15 pad0: Sink [fmt:unknown/0x0] pad1: Sink [fmt:unknown/0x0] <- "adv7180 2-0020":0 [] pad2: Source [fmt:unknown/0x0] -> "ipu2_csi1":0 [] v4l2-compliance test results: (on /dev/video6 as v4l2-compliance doesn't yet support subdevs) Driver Info: Driver name : imx-media-captu Card type : imx-media-capture Bus info : platform:ipu2_csi0 Driver version: 4.13.0 Capabilities : 0x84200001 Video Capture Streaming Extended Pix Format Device Capabilities Device Caps : 0x04200001 Video Capture Streaming Extended Pix Format Compliance test for device /dev/video6 (not using libv4l2): Required ioctls: test VIDIOC_QUERYCAP: OK Allow for multiple opens: test second video open: OK test VIDIOC_QUERYCAP: OK test VIDIOC_G/S_PRIORITY: OK Debug ioctls: test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported) test VIDIOC_LOG_STATUS: OK (Not Supported) Input ioctls: test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported) test VIDIOC_ENUMAUDIO: OK (Not Supported) fail: v4l2-test-input-output.cpp(418): G_INPUT not supported for a capture device test VIDIOC_G/S/ENUMINPUT: FAIL test VIDIOC_G/S_AUDIO: OK (Not Supported) Inputs: 0 Audio Inputs: 0 Tuners: 0 Output ioctls: test VIDIOC_G/S_MODULATOR: OK (Not Supported) test VIDIOC_G/S_FREQUENCY: OK (Not Supported) test VIDIOC_ENUMAUDOUT: OK (Not Supported) test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported) test VIDIOC_G/S_AUDOUT: OK (Not Supported) Outputs: 0 Audio Outputs: 0 Modulators: 0 Input/Output configuration ioctls: test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported) test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported) test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported) test VIDIOC_G/S_EDID: OK (Not Supported) Control ioctls: test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK test VIDIOC_QUERYCTRL: OK test VIDIOC_G/S_CTRL: OK fail: v4l2-test-controls.cpp(574): g_ext_ctrls does not support count == 0 test VIDIOC_G/S/TRY_EXT_CTRLS: FAIL test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK (Not Supported) test VIDIOC_G/S_JPEGCOMP: OK (Not Supported) Standard Controls: 0 Private Controls: 0 Format ioctls: test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK test VIDIOC_G/S_PARM: OK test VIDIOC_G_FBUF: OK (Not Supported) test VIDIOC_G_FMT: OK test VIDIOC_TRY_FMT: OK test VIDIOC_S_FMT: OK test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported) test Cropping: OK (Not Supported) test Composing: OK (Not Supported) test Scaling: OK (Not Supported) Codec ioctls: test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported) test VIDIOC_G_ENC_INDEX: OK (Not Supported) test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported) Buffer ioctls: test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK test VIDIOC_EXPBUF: OK Test input 0: Total: 42, Succeeded: 40, Failed: 2, Warnings: 0 Hans Verkuil (1): v4l2-dv-timings: add v4l2_hdmi_colorimetry() Tim Harvey (5): MAINTAINERS: add entry for NXP TDA1997x driver media: dt-bindings: Add bindings for TDA1997X media: i2c: Add TDA1997x HDMI receiver driver ARM: dts: imx: Add TDA19971 HDMI Receiver to GW54xx ARM: dts: imx: Add TDA19971 HDMI Receiver to GW551x .../devicetree/bindings/media/i2c/tda1997x.txt | 179 + MAINTAINERS | 8 + arch/arm/boot/dts/imx6q-gw54xx.dts | 105 + arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 29 +- arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 138 + drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 3476 ++++++++++++++++++++ drivers/media/v4l2-core/v4l2-dv-timings.c | 141 + include/dt-bindings/media/tda1997x.h | 74 + include/media/i2c/tda1997x.h | 41 + include/media/v4l2-dv-timings.h | 21 + 12 files changed, 4219 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/i2c/tda1997x.txt create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h -- 2.7.4

2 14

[alsa-devel] [PATCH v5 0/6] ASoC: Intel: Skylake: Add a clk driver to enable ssp clks early
by Sriram Periyasamy 26 Jan '18

26 Jan '18

For certain platforms, clocks (mclk/sclk/fs) are required to be up before the stream start. Example: some codecs needs the mclk/sclk/fs to be enabled early for a successful clock synchronization. Some platforms require clock to be enabled at boot and be always ON. By sending set_dma_control IPC (with the i2s blobs queried from NHLT), these clocks can be enabled early after the firmware is downloaded. With this series, a virtual clock driver is created which provides interface to send the required IPCs from machine driver to enable the clocks. NHLT is parsed during probe and the clock information is populated. The pointer to blob is cached and sent along with the set_dma_control IPC structure during the clk prepare/unprepare callback. Clocks are created for a ssp if the nhlt table has endpoint configuration for that particular ssp. Kabylake machine driver uses the clock interface to enable the clocks early as it is required by the rt5663 driver for clock synchronization. v4 -> v5 - Remove checks for clock enable status from machine driver since taken care in the framework already - Add check in the skl_clk_set_rate to avoid different rates when clock is enabled already v3 -> v4 - Add missing signed-offs v2 -> v3 - Moved the clk ops and IPCs from Skylake driver to clk driver and reordered commits accordingly - Add the support for extended I2S blob config which supports multiple mclk dividers in NHLT - Enable the clocks as well in DAPM PMU event instead of hw_params in machine drivers as confirmed by codec vendor - Do not register the clk if there is no valid clock source is avail in the I2S blob - Take care of error return in the clk driver - Address rest of the review comments and more optimization added - Fix the warning sound/soc/intel/skylake/skl.c:724:1-3: WARNING: PTR_ERR_OR_ZERO can be used reported by scripts/coccinelle/api/ptr_ret.cocci - Modified DSP replies as human readable to ease the debugging - Add firmware replies for MCLK/SCLK clocks if they are running already v1 -> v2 - Register parent clocks with skylake device. With the patch "clk: Add support for runtime PM" soon to be merged will help DSP to stay active on call to clock enable. Reference: (https://patchwork.kernel.org/patch/9911741/) - Fix the machine driver to enable clocks early for headphone playback path as well to fix a pop noise issue Harsha Priya (1): ASoC: Intel: kbl: Enable mclk and ssp sclk early Naveen M (1): ASoC: Intel: eve: Enable mclk and ssp sclk early Sriram Periyasamy (2): ASoC: Intel: Skylake: Add ssp clock driver ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driver Subhransu S. Prusty (2): ASoC: Intel: Skylake: Make DSP replies more human readable ASoC: Intel: Skylake: Add FW reply for MCLK/SCLK IPC sound/soc/intel/Kconfig | 3 + sound/soc/intel/boards/Kconfig | 2 + sound/soc/intel/boards/kbl_rt5663_max98927.c | 95 ++++- .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 94 ++++ sound/soc/intel/skylake/Makefile | 5 + sound/soc/intel/skylake/skl-i2s.h | 31 ++ sound/soc/intel/skylake/skl-messages.c | 1 + sound/soc/intel/skylake/skl-nhlt.c | 41 +- sound/soc/intel/skylake/skl-ssp-clk.c | 473 +++++++++++++++++++++ sound/soc/intel/skylake/skl-ssp-clk.h | 38 ++ sound/soc/intel/skylake/skl-sst-ipc.c | 50 ++- sound/soc/intel/skylake/skl.h | 6 + 12 files changed, 815 insertions(+), 24 deletions(-) create mode 100644 sound/soc/intel/skylake/skl-ssp-clk.c -- 2.7.4

6 19

[alsa-devel] [PATCH] ASoC: rockchip: Use dummy_dai for rt5514 dsp dailink
by Jeffy Chen 25 Jan '18

25 Jan '18

The rt5514 dsp captures pcm data through spi directly, so we should not use rockchip-i2s as it's cpu dai like other codecs. Use dummy_dai for rt5514 dsp dailink to make voice wakeup work again. Reported-by: Jimmy Cheng-Yi Chiang <cychiang(a)google.com> Fixes: (72cfb0f20c75 ASoC: rockchip: Use codec of_node and dai_name for rt5514 dsp) Signed-off-by: Jeffy Chen <jeffy.chen(a)rock-chips.com> --- sound/soc/rockchip/rk3399_gru_sound.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/sound/soc/rockchip/rk3399_gru_sound.c b/sound/soc/rockchip/rk3399_gru_sound.c index d64fbbd50544..aa8ffd035377 100644 --- a/sound/soc/rockchip/rk3399_gru_sound.c +++ b/sound/soc/rockchip/rk3399_gru_sound.c @@ -367,7 +367,8 @@ static const struct snd_soc_dai_link rockchip_dais[] = { [DAILINK_RT5514_DSP] = { .name = "RT5514 DSP", .stream_name = "Wake on Voice", - .codec_dai_name = "rt5514-dsp-cpu-dai", + .codec_name = "snd-soc-dummy", + .codec_dai_name = "snd-soc-dummy-dai", }, }; @@ -528,7 +529,18 @@ static int rockchip_sound_of_parse_dais(struct device *dev, if (index < 0) continue; - np_cpu = (index == DAILINK_CDNDP) ? np_cpu1 : np_cpu0; + switch (index) { + case DAILINK_CDNDP: + np_cpu = np_cpu1; + break; + case DAILINK_RT5514_DSP: + np_cpu = np_codec; + break; + default: + np_cpu = np_cpu0; + break; + } + if (!np_cpu) { dev_err(dev, "Missing 'rockchip,cpu' for %s\n", rockchip_dais[index].name); @@ -538,7 +550,8 @@ static int rockchip_sound_of_parse_dais(struct device *dev, dai = &card->dai_link[card->num_links++]; *dai = rockchip_dais[index]; - dai->codec_of_node = np_codec; + if (!dai->codec_name) + dai->codec_of_node = np_codec; dai->platform_of_node = np_cpu; dai->cpu_of_node = np_cpu; -- 2.11.0

3 2

[alsa-devel] [PATCH 0/2] sunxi: Add Capture support for sun8i-a33
by Mylène Josserand 25 Jan '18

25 Jan '18

Hello everyone, Here is a first series to add support for the capture for Allwinner Sun8I-A33 SoC (sun8i-codec). These patches have been tested on Sun8i-r16 parrot board and the two microphones are working well. Noticed that the DAPM route is not correct: "Right/Left Digital ADC Mixer" widgets should be after the "Right ADC" (according to what I understood from the datasheet). This is currently not the case but when I tried to update it, I got an error about "failing to add routes". I will investigate why in next weeks (and send a V2) but as it can take time, I think it is better to send a V1 and got reviews (because it is the first time I am implementing such features). Thank you in advance, Best regards, Mylène Mylène Josserand (2): ASoC: sun8i-codec: Add ADC support for a33 ARM: dts: sun8i: Add ADC routing arch/arm/boot/dts/sun8i-a33.dtsi | 10 ++++- sound/soc/sunxi/sun8i-codec.c | 82 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 89 insertions(+), 3 deletions(-) -- 2.11.0

3 4

[alsa-devel] [PATCH for-4.15] ASoC: rt5514: don't assume rt5514 component was "attached"
by Brian Norris 24 Jan '18

24 Jan '18

I've found that on Google's "Kevin" Chromebook, the rt5514 codec might not be set up completely, yet its device is still present, and therefore its PM suspend/resume is called. This hits a NULL pointer exception, since we never had the chance to set our drvdata pointer. This resolves crashes seen when trying to resume my system. Fixes: e9c50aa6bd39 ("ASoC: rt5514-spi: check irq status to schedule data copy in resume function") Signed-off-by: Brian Norris <briannorris(a)chromium.org> --- This is a v4.15-rc1 regression sound/soc/codecs/rt5514-spi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5514-spi.c b/sound/soc/codecs/rt5514-spi.c index 2df91db765ac..9255afcf2c3a 100644 --- a/sound/soc/codecs/rt5514-spi.c +++ b/sound/soc/codecs/rt5514-spi.c @@ -482,7 +482,7 @@ static int __maybe_unused rt5514_resume(struct device *dev) if (device_may_wakeup(dev)) disable_irq_wake(irq); - if (rt5514_dsp->substream) { + if (rt5514_dsp && rt5514_dsp->substream) { rt5514_spi_burst_read(RT5514_IRQ_CTRL, (u8 *)&buf, sizeof(buf)); if (buf[0] & RT5514_IRQ_STATUS_BIT) rt5514_schedule_copy(rt5514_dsp); -- 2.15.1.504.g5279b80103-goog

3 9

[alsa-devel] [PATCH] ASoC: soc-pcm: don't call flush_delayed_work() many times in soc_pcm_private_free()
by Kuninori Morimoto 24 Jan '18

24 Jan '18

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> commit f523acebbb74 ("ASoC: add Component level pcm_new/pcm_free v2") added component level pcm_new/pcm_free, but flush_delayed_work() on soc_pcm_private_free() is called in for_each_rtdcom() loop. It doesn't need to be called many times. This patch moves it out of loop. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- sound/soc/soc-pcm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 8075856..998800c 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2831,10 +2831,9 @@ static void soc_pcm_private_free(struct snd_pcm *pcm) struct snd_soc_rtdcom_list *rtdcom; struct snd_soc_component *component; + /* need to sync the delayed work before releasing resources */ + flush_delayed_work(&rtd->delayed_work); for_each_rtdcom(rtd, rtdcom) { - /* need to sync the delayed work before releasing resources */ - - flush_delayed_work(&rtd->delayed_work); component = rtdcom->component; if (component->pcm_free) -- 1.9.1

2 1

[alsa-devel] [PATCH v5] ASoC: ak4613: call dummy write for PW_MGMT1/3 when Playback
by Kuninori Morimoto 24 Jan '18

24 Jan '18

From: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> Power Down Release Command (PMVR, PMDAC, RSTN, PMDA1-PMDA6) which are located on PW_MGMT1 / PW_MGMT3 register must be write again after at least 5 LRCK cycle or later on each command. Otherwise, Playback volume will be 0dB. Basically, it should be 1. PowerDownRelease by Power Management1 <= call 1.x after 5LRCK 1.x Dummy write to Power Management1 2. PowerDownRelease by Power Management3 <= call 2.x after 5LRCK 2.x Dummy write to Power Management3 To avoid too many dummy write, this patch is merging these. 1. PowerDownRelease by Power Management1 2. PowerDownRelease by Power Management3 <= call after 5LRCK 2.x Dummy write to Power Management1/3 <= merge dummy write This patch adds dummy write when Playback Start timing. Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx(a)renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com> --- v4 -> v5 - added Note on comment - tidyup comment (delayed work -> schedule_work) sound/soc/codecs/ak4613.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c index ee9e822..d85c61e 100644 --- a/sound/soc/codecs/ak4613.c +++ b/sound/soc/codecs/ak4613.c @@ -15,6 +15,7 @@ */ #include <linux/clk.h> +#include <linux/delay.h> #include <linux/i2c.h> #include <linux/slab.h> #include <linux/of_device.h> @@ -95,6 +96,9 @@ struct ak4613_priv { struct mutex lock; const struct ak4613_interface *iface; struct snd_pcm_hw_constraint_list constraint; + struct work_struct dummy_write_work; + struct snd_soc_component *component; + unsigned int rate; unsigned int sysclk; unsigned int fmt; @@ -392,6 +396,7 @@ static int ak4613_dai_hw_params(struct snd_pcm_substream *substream, default: return -EINVAL; } + priv->rate = rate; /* * FIXME @@ -467,11 +472,83 @@ static int ak4613_set_bias_level(struct snd_soc_component *component, return 0; } +static void ak4613_dummy_write(struct work_struct *work) +{ + struct ak4613_priv *priv = container_of(work, + struct ak4613_priv, + dummy_write_work); + struct snd_soc_component *component = priv->component; + unsigned int mgmt1; + unsigned int mgmt3; + + /* + * PW_MGMT1 / PW_MGMT3 needs dummy write at least after 5 LR clocks + * + * Note + * + * To avoid extra delay, we want to avoid preemption here, + * but we can't. Because it uses I2C access which is using IRQ + * and sleep. Thus, delay might be more than 5 LR clocks + * see also + * ak4613_dai_trigger() + */ + udelay(5000000 / priv->rate); + + snd_soc_component_read(component, PW_MGMT1, &mgmt1); + snd_soc_component_read(component, PW_MGMT3, &mgmt3); + + snd_soc_component_write(component, PW_MGMT1, mgmt1); + snd_soc_component_write(component, PW_MGMT3, mgmt3); +} + +static int ak4613_dai_trigger(struct snd_pcm_substream *substream, int cmd, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct ak4613_priv *priv = snd_soc_codec_get_drvdata(codec); + + /* + * FIXME + * + * PW_MGMT1 / PW_MGMT3 needs dummy write at least after 5 LR clocks + * from Power Down Release. Otherwise, Playback volume will be 0dB. + * To avoid complex multiple delay/dummy_write method from + * ak4613_set_bias_level() / SND_SOC_DAPM_DAC_E("DACx", ...), + * call it once here. + * + * But, unfortunately, we can't "write" here because here is atomic + * context (It uses I2C access for writing). + * Thus, use schedule_work() to switching to normal context + * immediately. + * + * Note + * + * Calling ak4613_dummy_write() function might be delayed. + * In such case, ak4613 volume might be temporarily 0dB when + * beggining of playback. + * see also + * ak4613_dummy_write() + */ + + if ((cmd != SNDRV_PCM_TRIGGER_START) && + (cmd != SNDRV_PCM_TRIGGER_RESUME)) + return 0; + + if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) + return 0; + + priv->component = &codec->component; + schedule_work(&priv->dummy_write_work); + + return 0; +} + static const struct snd_soc_dai_ops ak4613_dai_ops = { .startup = ak4613_dai_startup, .shutdown = ak4613_dai_shutdown, .set_sysclk = ak4613_dai_set_sysclk, .set_fmt = ak4613_dai_set_fmt, + .trigger = ak4613_dai_trigger, .hw_params = ak4613_dai_hw_params, }; @@ -591,6 +668,7 @@ static int ak4613_i2c_probe(struct i2c_client *i2c, priv->iface = NULL; priv->cnt = 0; priv->sysclk = 0; + INIT_WORK(&priv->dummy_write_work, ak4613_dummy_write); mutex_init(&priv->lock); -- 1.9.1

2 1

[alsa-devel] [PATCH 4/6] alsa-lib:pcm: fix the hw_ptr update until the boundary available.
by sutar.mounesh＠gmail.com 19 Jan '18

19 Jan '18

From: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> For long time test case, the slave_hw_ptr will exceed the boundary and wraparound the slave_hw_ptr. This slave boundary wraparound will cause the rate->hw_ptr to wraparound irrespective of the rate->boundary availability and due to that the available size goes wrong. Hence, To get the correct available size, - Its necessary to increment the rate->hw_ptr upto the rate->boundary and then wraparound the rate->hw_ptr. - While handling fraction part of slave period, rounded value will be introduced by input_frames(). To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Signed-off-by: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> Signed-off-by: Mounesh Sutar <mounesh_sutar(a)mentor.com> diff --git a/src/pcm/pcm_rate.c b/src/pcm/pcm_rate.c index 1f830dd..5bee77c 100644 --- a/src/pcm/pcm_rate.c +++ b/src/pcm/pcm_rate.c @@ -50,7 +50,7 @@ typedef struct _snd_pcm_rate snd_pcm_rate_t; struct _snd_pcm_rate { snd_pcm_generic_t gen; - snd_pcm_uframes_t appl_ptr, hw_ptr; + snd_pcm_uframes_t appl_ptr, hw_ptr, last_slave_hw_ptr; snd_pcm_uframes_t last_commit_ptr; snd_pcm_uframes_t orig_avail_min; snd_pcm_sw_params_t sw_params; @@ -563,14 +563,28 @@ static inline void snd_pcm_rate_sync_hwptr0(snd_pcm_t *pcm, snd_pcm_uframes_t sl { snd_pcm_rate_t *rate = pcm->private_data; + snd_pcm_sframes_t slave_hw_ptr_diff = slave_hw_ptr - rate->last_slave_hw_ptr; + snd_pcm_sframes_t last_slave_hw_ptr_frac; + if (pcm->stream != SND_PCM_STREAM_PLAYBACK) return; - /* FIXME: boundary overlap of slave hw_ptr isn't evaluated here! - * e.g. if slave rate is small... - */ - rate->hw_ptr = - (slave_hw_ptr / rate->gen.slave->period_size) * pcm->period_size + - rate->ops.input_frames(rate->obj, slave_hw_ptr % rate->gen.slave->period_size); + + if (slave_hw_ptr_diff < 0) + slave_hw_ptr_diff += rate->gen.slave->boundary; /* slave boundary wraparound */ + else if (slave_hw_ptr_diff == 0) + return; + last_slave_hw_ptr_frac = rate->last_slave_hw_ptr % rate->gen.slave->period_size; + /* While handling fraction part fo slave period, rounded value will be introduced by input_frames(). + * To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and + * add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Hence, + * rate->hw_ptr += [ (no. of updated slave periods * pcm rate period size) - + * fractional part of last_slave_hw_ptr rounded value + + * fractional part of updated slave hw ptr's rounded value ] */ + rate->hw_ptr += ( + (((last_slave_hw_ptr_frac + slave_hw_ptr_diff) / rate->gen.slave->period_size) * pcm->period_size) - + rate->ops.input_frames(rate->obj, last_slave_hw_ptr_frac) + + rate->ops.input_frames(rate->obj, (last_slave_hw_ptr_frac + slave_hw_ptr_diff) % rate->gen.slave->period_size)); + rate->last_slave_hw_ptr = slave_hw_ptr; rate->hw_ptr %= pcm->boundary; } @@ -635,6 +649,7 @@ static int snd_pcm_rate_prepare(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; @@ -650,6 +665,7 @@ static int snd_pcm_rate_reset(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; -- 1.7.9.5

3 2

[alsa-devel] [PATCH V3 0/2] ARM: dts: bcm283x: Fix probing of bcm2835-i2s
by Stefan Wahren 17 Jan '18

17 Jan '18

This small series fixes the probing of bcm2835-i2s, which is broken since 517e7a1537a ("ASoC: bcm2835: move to use the clock framework"). Changes in V3: * split up patch into dt-binding and functional part Changes in V2: * add Fixes, Reviewed-by and Tested-by tags Stefan Wahren (2): dt-bindings: bcm283x: Fix register ranges of bcm2835-i2s ARM: dts: bcm283x: Fix probing of bcm2835-i2s Documentation/devicetree/bindings/dma/brcm,bcm2835-dma.txt | 4 ++-- Documentation/devicetree/bindings/sound/brcm,bcm2835-i2s.txt | 9 ++++----- arch/arm/boot/dts/bcm283x.dtsi | 4 ++-- 3 files changed, 8 insertions(+), 9 deletions(-) -- 2.7.4

2 4

[alsa-devel] Silencing plops / click sounds on start / stop of playing audio when snd_hda_intel.power_save=1
by Hans de Goede 17 Jan '18

17 Jan '18

Hi All, For Fedora 28 we plan to ship the kernel with snd_hda_intel.power_save defaulting to 1: https://fedoraproject.org/wiki/Changes/ImprovedLaptopBatteryLife We've had an update for F27 in updates-testing for a while which made the same change for F27, but we've received several bug reports about plops / click sounds on start / stop of playing audio: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 I know others have probably already tried fixing this, but I'm wondering if there are any ideas how to fix this / things to try? Ideas of my own: 1) Mute the speakers / headphone output in the mixer before activating power-saving. Question how hard would it be to make this happen? 2) Put a delay between various steps involved in turning things off / on. Regards, Hans

2 2