December 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] New codec support for ALC257
by Kailang 05 Dec '17

05 Dec '17

Hi Takashi, This patch was support new codec for ALC257. BR, Kailang

2 1

[alsa-devel] [PATCH v6 00/13] Add STM32 DFSDM support
by Arnaud Pouliquen 04 Dec '17

04 Dec '17

Hello, Here is a new version to fix kbuild test warnings Main deltas V6 vs V5: - Fix warning reported by kbuild test in : include/linux/iio/consumer.h sound/soc/stm/stm32_adfsdm.c Main deltas V5 vs V4: - Integrate ASOC DAI as a subnode of the DFSDM. - Add in kernel consumer interface to allow to manipulate attribute. Context reminder: ----------------- DFSDM peripheral is a peripheral that allows to connect some sigma delta ADCs or PDM microphones via a SPI or Manchester bus. DFSDM integrates digital filters to offer up to 24 bits final resolution. In term of SW architecture. 2 use-cases have to be supported: 1) Sigma delta ADC conversion through IIO framework. Sigma delta ADC is handled by generic sigma delta modulator driver. DFSDM peripheral is binded to a SD modulator ADC using the IIO HW consumer interface. Please notice that IIO HW consumer interface has be proposed by Lars, but is part of this patchset with Lars's agreement. User interface is IIO one. Notice that this patch-set propose only a raw conversion, to simplify review. Buffer and trigger management will be added in next patch-sets. 2) PDM microphone record through ALSA framework. PDM microphone is handled by ASOC Generic DMIC codec driver. ADFSDM ASOC DAI driver is binded to IIO driver using the IIO consumer interface ADFSDM ASOC DAI driver is binded to a PDM microphone ASOC component using ASOC Of_graph. User interface is ALSA one. As IIO DMA management is not adapted to an audio realtime stream. A specific DMA management has been implemented in IIO driver for audio purposes. Regards, Arnaud Arnaud Pouliquen (12): docs: driver-api: add iio hw consumer section IIO: hw_consumer: add devm_iio_hw_consumer_alloc IIO: inkern: API for manipulating channel attributes IIO: Add DT bindings for sigma delta adc modulator IIO: ADC: add sigma delta modulator support IIO: add DT bindings for stm32 DFSDM filter IIO: ADC: add stm32 DFSDM core support IIO: ADC: add STM32 DFSDM sigma delta ADC support IIO: ADC: add stm32 DFSDM support for PDM microphone IIO: consumer: allow to set buffer sizes ASoC: add bindings for stm32 DFSDM filter ASoC: stm32: add DFSDM DAI support Lars-Peter Clausen (1): iio: Add hardware consumer buffer support .../ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 | 16 + .../bindings/iio/adc/sigma-delta-modulator.txt | 13 + .../bindings/iio/adc/st,stm32-dfsdm-adc.txt | 127 ++ .../devicetree/bindings/sound/st,stm32-adfsdm.txt | 62 + Documentation/driver-api/iio/hw-consumer.rst | 51 + Documentation/driver-api/iio/index.rst | 1 + drivers/iio/adc/Kconfig | 37 + drivers/iio/adc/Makefile | 3 + drivers/iio/adc/sd_adc_modulator.c | 81 ++ drivers/iio/adc/stm32-dfsdm-adc.c | 1232 ++++++++++++++++++++ drivers/iio/adc/stm32-dfsdm-core.c | 318 +++++ drivers/iio/adc/stm32-dfsdm.h | 319 +++++ drivers/iio/buffer/Kconfig | 10 + drivers/iio/buffer/Makefile | 1 + drivers/iio/buffer/industrialio-buffer-cb.c | 11 + drivers/iio/buffer/industrialio-hw-consumer.c | 248 ++++ drivers/iio/inkern.c | 18 +- include/linux/iio/adc/stm32-dfsdm-adc.h | 28 + include/linux/iio/consumer.h | 39 +- include/linux/iio/hw-consumer.h | 22 + sound/soc/stm/Kconfig | 11 + sound/soc/stm/Makefile | 3 + sound/soc/stm/stm32_adfsdm.c | 386 ++++++ 23 files changed, 3031 insertions(+), 6 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-dfsdm-adc-stm32 create mode 100644 Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt create mode 100644 Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.txt create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-adfsdm.txt create mode 100644 Documentation/driver-api/iio/hw-consumer.rst create mode 100644 drivers/iio/adc/sd_adc_modulator.c create mode 100644 drivers/iio/adc/stm32-dfsdm-adc.c create mode 100644 drivers/iio/adc/stm32-dfsdm-core.c create mode 100644 drivers/iio/adc/stm32-dfsdm.h create mode 100644 drivers/iio/buffer/industrialio-hw-consumer.c create mode 100644 include/linux/iio/adc/stm32-dfsdm-adc.h create mode 100644 include/linux/iio/hw-consumer.h create mode 100644 sound/soc/stm/stm32_adfsdm.c -- 2.7.4

4 25

[alsa-devel] [PATCH] ASoC: amd: added error checks in dma driver
by Vijendar Mukunda 04 Dec '17

04 Dec '17

added additional error checks in acp dma driver v2: printed error codes for acp init & acp deinit failure cases. Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda(a)amd.com> --- sound/soc/amd/acp-pcm-dma.c | 35 ++++++++++++++++++++++++++++++----- 1 file changed, 30 insertions(+), 5 deletions(-) diff --git a/sound/soc/amd/acp-pcm-dma.c b/sound/soc/amd/acp-pcm-dma.c index fb09578..29be517 100644 --- a/sound/soc/amd/acp-pcm-dma.c +++ b/sound/soc/amd/acp-pcm-dma.c @@ -848,6 +848,9 @@ static snd_pcm_uframes_t acp_dma_pointer(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct audio_substream_data *rtd = runtime->private_data; + if (!rtd) + return -EINVAL; + buffersize = frames_to_bytes(runtime, runtime->buffer_size); bytescount = acp_get_byte_count(rtd->acp_mmio, substream->stream); @@ -873,6 +876,8 @@ static int acp_dma_prepare(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct audio_substream_data *rtd = runtime->private_data; + if (!rtd) + return -EINVAL; if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { config_acp_dma_channel(rtd->acp_mmio, SYSRAM_TO_ACP_CH_NUM, PLAYBACK_START_DMA_DESCR_CH12, @@ -1082,7 +1087,11 @@ static int acp_audio_probe(struct platform_device *pdev) dev_set_drvdata(&pdev->dev, audio_drv_data); /* Initialize the ACP */ - acp_init(audio_drv_data->acp_mmio, audio_drv_data->asic_type); + status = acp_init(audio_drv_data->acp_mmio, audio_drv_data->asic_type); + if (status) { + dev_err(&pdev->dev, "ACP Init failed status:%d\n", status); + return status; + } status = snd_soc_register_platform(&pdev->dev, &acp_asoc_platform); if (status != 0) { @@ -1099,9 +1108,12 @@ static int acp_audio_probe(struct platform_device *pdev) static int acp_audio_remove(struct platform_device *pdev) { + int status; struct audio_drv_data *adata = dev_get_drvdata(&pdev->dev); - acp_deinit(adata->acp_mmio); + status = acp_deinit(adata->acp_mmio); + if (status) + dev_err(&pdev->dev, "ACP Deinit failed status:%d\n", status); snd_soc_unregister_platform(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -1111,9 +1123,14 @@ static int acp_audio_remove(struct platform_device *pdev) static int acp_pcm_resume(struct device *dev) { u16 bank; + int status; struct audio_drv_data *adata = dev_get_drvdata(dev); - acp_init(adata->acp_mmio, adata->asic_type); + status = acp_init(adata->acp_mmio, adata->asic_type); + if (status) { + dev_err(dev, "ACP Init failed status:%d\n", status); + return status; + } if (adata->play_stream && adata->play_stream->runtime) { /* For Stoney, Memory gating is disabled,i.e SRAM Banks @@ -1145,18 +1162,26 @@ static int acp_pcm_resume(struct device *dev) static int acp_pcm_runtime_suspend(struct device *dev) { + int status; struct audio_drv_data *adata = dev_get_drvdata(dev); - acp_deinit(adata->acp_mmio); + status = acp_deinit(adata->acp_mmio); + if (status) + dev_err(dev, "ACP Deinit failed status:%d\n", status); acp_reg_write(0, adata->acp_mmio, mmACP_EXTERNAL_INTR_ENB); return 0; } static int acp_pcm_runtime_resume(struct device *dev) { + int status; struct audio_drv_data *adata = dev_get_drvdata(dev); - acp_init(adata->acp_mmio, adata->asic_type); + status = acp_init(adata->acp_mmio, adata->asic_type); + if (status) { + dev_err(dev, "ACP Init failed status:%d\n", status); + return status; + } acp_reg_write(1, adata->acp_mmio, mmACP_EXTERNAL_INTR_ENB); return 0; } -- 2.7.4

2 2

[alsa-devel] [PATCH 1/2] ASoC: Intel: Skylake: Make local functions static
by Guneshwor Singh 04 Dec '17

04 Dec '17

Some functions are local to the source and do not need to be in global scope, so make them static. Signed-off-by: Guneshwor Singh <guneshwor.o.singh(a)intel.com> --- sound/soc/intel/skylake/skl-nhlt.c | 4 ++-- sound/soc/intel/skylake/skl.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/intel/skylake/skl-nhlt.c b/sound/soc/intel/skylake/skl-nhlt.c index 6734a439196b..e2121ddc8ef0 100644 --- a/sound/soc/intel/skylake/skl-nhlt.c +++ b/sound/soc/intel/skylake/skl-nhlt.c @@ -283,7 +283,7 @@ void skl_nhlt_remove_sysfs(struct skl *skl) * stores all possible rates supported in a rate table for the corresponding * sclk/sclkfs. */ -void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks, +static void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks, struct nhlt_fmt *fmt, u8 id) { struct skl_i2s_config_blob_legacy *i2s_config; @@ -374,7 +374,7 @@ void skl_get_ssp_clks(struct skl *skl, struct skl_ssp_clk *ssp_clks, } } -void skl_get_mclk(struct skl *skl, struct skl_ssp_clk *mclk, +static void skl_get_mclk(struct skl *skl, struct skl_ssp_clk *mclk, struct nhlt_fmt *fmt, u8 id) { struct skl_i2s_config_blob_legacy *i2s_config; diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 9e90a50dd9cd..90cc207869c7 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -568,7 +568,7 @@ struct skl_clk_parent_src *skl_get_parent_clk(u8 clk_id) return NULL; } -void init_skl_xtal_rate(int pci_id) +static void init_skl_xtal_rate(int pci_id) { switch (pci_id) { case 0x9d70: -- 2.15.1

3 4

[alsa-devel] [PATCH 9/9] ASoC: eukrea-tlv320: Remove include line of fsl_ssi.h
by Nicolin Chen 04 Dec '17

04 Dec '17

The machine driver links both imx-ssi (legacy non-DT driver) and fsl_ssi (up-to-date DT based driver). So It also includes both imx-ssi.h and fsl_ssi.h header files. This creates a limitation for two header files -- they can't define anything with identical names. Since the eukrea-tlv320 machine driver now does not really need anything being defined in the fsl_ssi header file, and it's also going to take some time to clean up two SSI drivers, this patch takes a quick way to remove the #include fsl_ssi.h line for now. It can be added back once the header files are done refactoring. The eukrea-tlv320 driver is still compiled successfully without any erorr using imx_v6_v6_defconfig, after removing it. Signed-off-by: Nicolin Chen <nicoleotsuka(a)gmail.com> --- sound/soc/fsl/eukrea-tlv320.c | 1 - 1 file changed, 1 deletion(-) diff --git a/sound/soc/fsl/eukrea-tlv320.c b/sound/soc/fsl/eukrea-tlv320.c index 84ef638..191426a 100644 --- a/sound/soc/fsl/eukrea-tlv320.c +++ b/sound/soc/fsl/eukrea-tlv320.c @@ -29,7 +29,6 @@ #include "../codecs/tlv320aic23.h" #include "imx-ssi.h" -#include "fsl_ssi.h" #include "imx-audmux.h" #define CODEC_CLOCK 12000000 -- 2.7.4

2 3

[alsa-devel] ASoC: nau8825: improve semaphore control
by John Hsu 04 Dec '17

04 Dec '17

After reviewing the crosstalk protection, there are two flaws at semaphore control. The first one is that the semaphore releases are not enough; and the other is that down_interruptible has an risk to make the ISR sleep. Therefore, the driver add more releases before the funcitons return. Take down_trylock to replace down_interruptible. The ISR can control the protection as well and never sleep by semaphore. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- sound/soc/codecs/nau8825.c | 38 +++++++++++++++++++++++--------------- 1 file changed, 23 insertions(+), 15 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 7947b11..2aea642 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -245,13 +245,14 @@ static const unsigned short logtable[256] = { * tasks are allowed to acquire the semaphore, calling this function will * put the task to sleep. If the semaphore is not released within the * specified number of jiffies, this function returns. - * Acquires the semaphore without jiffies. If no more tasks are allowed - * to acquire the semaphore, calling this function will put the task to - * sleep until the semaphore is released. * If the semaphore is not released within the specified number of jiffies, - * this function returns -ETIME. - * If the sleep is interrupted by a signal, this function will return -EINTR. - * It returns 0 if the semaphore was acquired successfully. + * this function returns -ETIME. If the sleep is interrupted by a signal, + * this function will return -EINTR. It returns 0 if the semaphore was + * acquired successfully. + * + * Acquires the semaphore without jiffies. Try to acquire the semaphore + * atomically. Returns 0 if the semaphore has been acquired successfully + * or 1 if it it cannot be acquired. */ static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) { @@ -262,8 +263,8 @@ static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) if (ret < 0) dev_warn(nau8825->dev, "Acquire semaphore timeout\n"); } else { - ret = down_interruptible(&nau8825->xtalk_sem); - if (ret < 0) + ret = down_trylock(&nau8825->xtalk_sem); + if (ret) dev_warn(nau8825->dev, "Acquire semaphore fail\n"); } @@ -1258,8 +1259,10 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, regmap_read(nau8825->regmap, NAU8825_REG_DAC_CTRL1, &osr); osr &= NAU8825_DAC_OVERSAMPLE_MASK; if (nau8825_clock_check(nau8825, substream->stream, - params_rate(params), osr)) + params_rate(params), osr)) { + nau8825_sema_release(nau8825); return -EINVAL; + } regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_DAC_SRC_MASK, osr_dac_sel[osr].clk_src << NAU8825_CLK_DAC_SRC_SFT); @@ -1267,8 +1270,10 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, regmap_read(nau8825->regmap, NAU8825_REG_ADC_RATE, &osr); osr &= NAU8825_ADC_SYNC_DOWN_MASK; if (nau8825_clock_check(nau8825, substream->stream, - params_rate(params), osr)) + params_rate(params), osr)) { + nau8825_sema_release(nau8825); return -EINVAL; + } regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_ADC_SRC_MASK, osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT); @@ -1285,8 +1290,10 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, bclk_div = 1; else if (bclk_fs <= 128) bclk_div = 0; - else + else { + nau8825_sema_release(nau8825); return -EINVAL; + } regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK, ((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div); @@ -1306,6 +1313,7 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream, val_len |= NAU8825_I2S_DL_32; break; default: + nau8825_sema_release(nau8825); return -EINVAL; } @@ -1324,8 +1332,6 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); unsigned int ctrl1_val = 0, ctrl2_val = 0; - nau8825_sema_acquire(nau8825, 3 * HZ); - switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBM_CFM: ctrl2_val |= NAU8825_I2S_MS_MASTER; @@ -1367,6 +1373,8 @@ static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) return -EINVAL; } + nau8825_sema_acquire(nau8825, 3 * HZ); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK | NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK, @@ -1713,7 +1721,7 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) int ret; nau8825->xtalk_protect = true; ret = nau8825_sema_acquire(nau8825, 0); - if (ret < 0) + if (ret) nau8825->xtalk_protect = false; } /* Startup cross talk detection process */ @@ -2399,7 +2407,7 @@ static int __maybe_unused nau8825_resume(struct snd_soc_codec *codec) regcache_sync(nau8825->regmap); nau8825->xtalk_protect = true; ret = nau8825_sema_acquire(nau8825, 0); - if (ret < 0) + if (ret) nau8825->xtalk_protect = false; enable_irq(nau8825->irq); -- 2.6.4

2 1

[alsa-devel] ASoC: nau8825: improve crosstalk measurement protection
by John Hsu 04 Dec '17

04 Dec '17

The sequence of crosstalk measurement is not robust. The driver add more protections to make it stronger. The improvements as follows: (1)Give backup table the default value. The values are the same with the default of hardware registers. The impact will decline once restoring the backup table in the wrong way. (2)Add xtalk_baktab_initialized flag. The flag can keep the initiation status of backup table. It helps to backup and restore the backup-table correctly. (3)Add cancel parameter in the restore function. The volume ramping should do in crosstalk DONE state only. Otherwise, the delay action is not allowed because the restore may happen during the jack eject interruption. (4)Add xtalk_protect condition check before scheduling work in ISR. It makes sure the semaphore hold during the crosstalk measurement. The sequence is still under protection from playback interference. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- sound/soc/codecs/nau8825.c | 45 +++++++++++++++++++++++++++++++-------------- sound/soc/codecs/nau8825.h | 1 + 2 files changed, 32 insertions(+), 14 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 603cd72..7947b11 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -194,10 +194,10 @@ static const struct reg_default nau8825_reg_defaults[] = { /* register backup table when cross talk detection */ static struct reg_default nau8825_xtalk_baktab[] = { - { NAU8825_REG_ADC_DGAIN_CTRL, 0 }, + { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf }, { NAU8825_REG_HSVOL_CTRL, 0 }, - { NAU8825_REG_DACL_CTRL, 0 }, - { NAU8825_REG_DACR_CTRL, 0 }, + { NAU8825_REG_DACL_CTRL, 0x00cf }, + { NAU8825_REG_DACR_CTRL, 0x02cf }, }; static const unsigned short logtable[256] = { @@ -454,22 +454,32 @@ static void nau8825_xtalk_backup(struct nau8825 *nau8825) { int i; + if (nau8825->xtalk_baktab_initialized) + return; + /* Backup some register values to backup table */ for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, &nau8825_xtalk_baktab[i].def); + + nau8825->xtalk_baktab_initialized = true; } -static void nau8825_xtalk_restore(struct nau8825 *nau8825) +static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel) { int i, volume; + if (!nau8825->xtalk_baktab_initialized) + return; + /* Restore register values from backup table; When the driver restores - * the headphone volumem, it needs recover to original level gradually - * with 3dB per step for less pop noise. + * the headphone volume in XTALK_DONE state, it needs recover to + * original level gradually with 3dB per step for less pop noise. + * Otherwise, the restore should do ASAP. */ for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) { - if (nau8825_xtalk_baktab[i].reg == NAU8825_REG_HSVOL_CTRL) { + if (!cause_cancel && nau8825_xtalk_baktab[i].reg == + NAU8825_REG_HSVOL_CTRL) { /* Ramping up the volume change to reduce pop noise */ volume = nau8825_xtalk_baktab[i].def & NAU8825_HPR_VOL_MASK; @@ -479,6 +489,8 @@ static void nau8825_xtalk_restore(struct nau8825 *nau8825) regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, nau8825_xtalk_baktab[i].def); } + + nau8825->xtalk_baktab_initialized = false; } static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) @@ -644,7 +656,7 @@ static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); } -static void nau8825_xtalk_clean(struct nau8825 *nau8825) +static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel) { /* Enable internal VCO needed for interruptions */ nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); @@ -660,7 +672,7 @@ static void nau8825_xtalk_clean(struct nau8825 *nau8825) NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE); /* Restore value of specific register for cross talk */ - nau8825_xtalk_restore(nau8825); + nau8825_xtalk_restore(nau8825, cause_cancel); } static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) @@ -779,7 +791,7 @@ static void nau8825_xtalk_measure(struct nau8825 *nau8825) dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone); regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, (sidetone << 8) | sidetone); - nau8825_xtalk_clean(nau8825); + nau8825_xtalk_clean(nau8825, false); nau8825->xtalk_state = NAU8825_XTALK_DONE; break; default: @@ -822,7 +834,7 @@ static void nau8825_xtalk_cancel(struct nau8825 *nau8825) if (nau8825->xtalk_enable && nau8825->xtalk_state != NAU8825_XTALK_DONE) { cancel_work_sync(&nau8825->xtalk_work); - nau8825_xtalk_clean(nau8825); + nau8825_xtalk_clean(nau8825, true); } /* Reset parameters for cross talk suppression function */ nau8825_sema_reset(nau8825); @@ -1705,8 +1717,11 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_protect = false; } /* Startup cross talk detection process */ - nau8825->xtalk_state = NAU8825_XTALK_PREPARE; - schedule_work(&nau8825->xtalk_work); + if (nau8825->xtalk_protect) { + nau8825->xtalk_state = + NAU8825_XTALK_PREPARE; + schedule_work(&nau8825->xtalk_work); + } } else { /* The cross talk suppression shouldn't apply * in the headset with high impedance. Thus, @@ -1733,7 +1748,8 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) nau8825->xtalk_event_mask = event_mask; } } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { - if (nau8825->xtalk_enable) + /* crosstalk detection enable and process on going */ + if (nau8825->xtalk_enable && nau8825->xtalk_protect) schedule_work(&nau8825->xtalk_work); clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == @@ -2570,6 +2586,7 @@ static int nau8825_i2c_probe(struct i2c_client *i2c, */ nau8825->xtalk_state = NAU8825_XTALK_DONE; nau8825->xtalk_protect = false; + nau8825->xtalk_baktab_initialized = false; sema_init(&nau8825->xtalk_sem, 1); INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work); diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 199d6ea..f7e7321 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -477,6 +477,7 @@ struct nau8825 { bool xtalk_protect; int imp_rms[NAU8825_XTALK_IMM]; int xtalk_enable; + bool xtalk_baktab_initialized; /* True if initialized. */ }; int nau8825_enable_jack_detect(struct snd_soc_codec *codec, -- 2.6.4

2 1

[alsa-devel] [PATCH 0/4] ALSA SoC TWL4030: Adjustments for two function implementations
by SF Markus Elfring 04 Dec '17

04 Dec '17

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Thu, 23 Nov 2017 22:02:44 +0100 A few update suggestions were taken into account from static source code analysis. Markus Elfring (4): Delete an error message for a failed memory allocation in twl4030_get_pdata() Use common error handling code in twl4030_get_pdata() Improve a size determination in two functions Delete an unnecessary variable initialisation in twl4030_get_pdata() sound/soc/codecs/twl4030.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-) -- 2.15.0

3 6

[alsa-devel] [PATCH 0/3] ALSA: usb-audio: fix OOB and return value check
by Jaejoong Kim 04 Dec '17

04 Dec '17

Hi, This patch series fixes the out-of-bound error caused by the return value of usb_string(). It was descovered by KASAN. The Patch 1 is the V2 about http://www.spinics.net/lists/alsa-devel/msg69487.html Chanes in V2: - put an explicit error bail out(by Takashi iwai) Patch1 was founded by connecting the following product. http://www.lg.com/uk/lg-friends/lg-AFD-1200 I found that it only check if the return value from usb_string() is always zero while modifying OOB KASAN message. So instead of making the modifications to OOB to V2, I sent a patch series. I am sorry to break the mail thread. Thanks jaejoong Jaejoong Kim (3): ALSA: usb-audio: Fix out-of-bound error ALSA: usb-audio: Fix return value check for usb_string() ALSA: usb-audio: Add check return value for usb_string() sound/usb/mixer.c | 41 ++++++++++++++++++++++++----------------- 1 file changed, 24 insertions(+), 17 deletions(-) -- 2.7.4

2 10

[alsa-devel] [PATCH 0/2] Add devicetree for Axentia Nattis
by Peter Rosin 03 Dec '17

03 Dec '17

Hi! I'd like to add a devicetree for our Nattis to the kernel. The Nattis is a device for showing departures for public transportation (optionally including a text-to-speech module for the visually impaired). I'm a bit unsure if the tfa9879 sound codec binding is needed, but I suppose it belongs in trivial-devices? Cheers, Peter Peter Rosin (2): dt-bindings: trivial: add tfa9879 device ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power Documentation/devicetree/bindings/arm/axentia.txt | 9 + .../devicetree/bindings/trivial-devices.txt | 1 + MAINTAINERS | 2 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-natte.dtsi | 245 +++++++++++++++++++ arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 258 +++++++++++++++++++++ 6 files changed, 516 insertions(+) create mode 100644 arch/arm/boot/dts/at91-natte.dtsi create mode 100644 arch/arm/boot/dts/at91-nattis-2-natte-2.dts -- 2.11.0

3 9