October 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: nuc900: Fix a loop timeout test
by Dan Carpenter 11 Dec '17

11 Dec '17

We should be finishing the loop with timeout set to zero but because this is a post-op we exit with timeout == -1. Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index b6615affe571..fde974d52bb2 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97, /* polling the AC_R_FINISH */ while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout) { @@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg, /* polling the AC_W_FINISH */ while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout)

2 1

[alsa-devel] Cherry Trail + RT5645 devices with a mono speaker ?
by Hans de Goede 08 Dec '17

08 Dec '17

Hi Pierre-Louis, Bard, I've been looking into getting some Cherry Trail + RT5645 devices with a mono speaker I have to work properly. Specifically the goal is to mix the right channel into the left output, so that sounds which are only played over the right channel do not get lost. I'm using this UCM file: https://github.com/plbossart/UCM/blob/master/byt-rt5640/HiFi Looking at the rtl5640 UCM file, getting the mono speaker to work (in a first simple attempt) should be as simple as replacing: cset "name='SPOR MIX SPKVOL R Switch' on" With cset "name='SPOL MIX SPKVOL R Switch' on" But this does not work, the speaker test sound for the right speaker is still silent (works with headphones). I've also looked into directly poking the RT5645_SPO_MIXER i2c register for testing, but when checking its value with the original unmodified UCM file: [root@localhost ~]# i2cget -y -f 1 0x1a 0x48 w 0x06c8 That is: 0xc806 as the output of i2cget "w" mode needs byteswapping. Note that both the RT5645_M_SV_L_SPM_L and RT5645_M_SV_R_SPM_L bits are already cleared, which is weird as this is before I've modified anything. Also the RT5645_M_SV_R_SPM_R bit is cleared, but that is expected. Even if I manually set reg 0x48 to 0x07c8 which AFAIK should enable output of both left and right channels on the left speaker I still only get sounds played on the left channel. Any insights / help with this would be very much welcome. Regards, Hans

2 7

[alsa-devel] [PATCH] ASoC: fsl_asrc: protect macro argument
by Stefan Agner 06 Dec '17

06 Dec '17

Protect macro argument with parentheses to avoid ambiguity. This fixes a warning seen with clang: warning: logical not is only applied to the left hand side of this comparison Signed-off-by: Stefan Agner <stefan(a)agner.ch> --- sound/soc/fsl/fsl_asrc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h index 0f163abe4ba3..ec33dab4b909 100644 --- a/sound/soc/fsl/fsl_asrc.h +++ b/sound/soc/fsl/fsl_asrc.h @@ -57,7 +57,7 @@ #define REG_ASRDOC 0x74 #define REG_ASRDI(i) (REG_ASRDIA + (i << 3)) #define REG_ASRDO(i) (REG_ASRDOA + (i << 3)) -#define REG_ASRDx(x, i) (x == IN ? REG_ASRDI(i) : REG_ASRDO(i)) +#define REG_ASRDx(x, i) ((x) == IN ? REG_ASRDI(i) : REG_ASRDO(i)) #define REG_ASRIDRHA 0x80 #define REG_ASRIDRLA 0x84 -- 2.13.3

3 7

[alsa-devel] [PATCH] ASoC: fsl_ssi: Override bit clock rate based on slot number
by Nicolin Chen 26 Nov '17

26 Nov '17

The set_sysclk() now is used to override the output bit clock rate. But this is not a common way to implement a set_dai_sysclk(). And this creates a problem when a general machine driver (simple-card for example) tries to do set_dai_sysclk() by passing an input clock rate for the baud clock instead of setting the bit clock rate as fsl_ssi driver expected. So this patch solves this problem by firstly removing set_sysclk() since the hw_params() can calculate the bit clock rate. Secondly, in order not to break those TDM use cases which previously might have been using set_sysclk() to override the bit clock rate, this patch changes the driver to override it based on the slot number. The patch also removes an obsolete comment of the dir parameter. Signed-off-by: Nicolin Chen <nicoleotsuka(a)gmail.com> --- sound/soc/fsl/fsl_ssi.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 64598d1..3657c88 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -197,12 +197,12 @@ struct fsl_ssi_soc_data { * @use_dma: DMA is used or FIQ with stream filter * @use_dual_fifo: DMA with support for both FIFOs used * @fifo_deph: Depth of the SSI FIFOs + * @slots: number of slots * @rxtx_reg_val: Specific register settings for receive/transmit configuration * * @clk: SSI clock * @baudclk: SSI baud clock for master mode * @baudclk_streams: Active streams that are using baudclk - * @bitclk_freq: bitclock frequency set by .set_dai_sysclk * * @dma_params_tx: DMA transmit parameters * @dma_params_rx: DMA receive parameters @@ -233,12 +233,12 @@ struct fsl_ssi_private { bool use_dual_fifo; bool has_ipg_clk_name; unsigned int fifo_depth; + unsigned int slots; struct fsl_ssi_rxtx_reg_val rxtx_reg_val; struct clk *clk; struct clk *baudclk; unsigned int baudclk_streams; - unsigned int bitclk_freq; /* regcache for volatile regs */ u32 regcache_sfcsr; @@ -700,8 +700,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, * Note: This function can be only called when using SSI as DAI master * * Quick instruction for parameters: - * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels - * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK. + * freq: Output BCLK frequency = samplerate * 32 (fixed) * slots (or channels) */ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai, @@ -716,9 +715,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, unsigned int freq; bool baudclk_is_used; - /* Prefer the explicitly set bitclock frequency */ - if (ssi_private->bitclk_freq) - freq = ssi_private->bitclk_freq; + /* Generate bit clock based on the slot or channel number */ + if (ssi_private->slots) + freq = ssi_private->slots * 32 * params_rate(hw_params); else freq = params_channels(hw_params) * 32 * params_rate(hw_params); @@ -805,16 +804,6 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, return 0; } -static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); - - ssi_private->bitclk_freq = freq; - - return 0; -} - /** * fsl_ssi_hw_params - program the sample size * @@ -1121,6 +1110,8 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, val); + ssi_private->slots = slots; + return 0; } @@ -1191,7 +1182,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = { .hw_params = fsl_ssi_hw_params, .hw_free = fsl_ssi_hw_free, .set_fmt = fsl_ssi_set_dai_fmt, - .set_sysclk = fsl_ssi_set_dai_sysclk, .set_tdm_slot = fsl_ssi_set_dai_tdm_slot, .trigger = fsl_ssi_trigger, }; -- 2.7.4

4 10

[alsa-devel] LADSPA ALSA plugin
by Robert Bielik 26 Nov '17

26 Nov '17

Hi all, Started experimenting with using LADSPA plugins with the ALSA LADSPA PCM plugin, and it works nicely. However, it seems only the PCM is interface is exposed from the plugin. Question is if there is a way to expose the LADSPA plugin parameters directly to alsamixer ? Regards /Rob

1 1

Re: [alsa-devel] KASAN: use-after-free Read in snd_timer_user_info_compat
by Takashi Iwai 21 Nov '17

21 Nov '17

On Fri, 27 Oct 2017 10:34:01 +0200, syzbot wrote: > > Hello, > > syzkaller hit the following crash on > 33d930e59a98fa10a0db9f56c7fa2f21a4aef9b9 > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/master > compiler: gcc (GCC) 7.1.1 20170620 > .config is attached > Raw console output is attached. > > syzkaller reproducer is attached. See https://goo.gl/kgGztJ > for information about syzkaller reproducers > > > BUG: KASAN: use-after-free in > snd_timer_user_info_compat.isra.6+0x46c/0x480 > sound/core/timer_compat.c:71 > Read of size 8 at addr ffff8801d0dd9d00 by task syz-executor0/3342 OK, this is a real bug, and obviously a forgotten code path from the previous fixes. The patch below should address it, but I checked only compile-tested, so far. Let me know if it really works. thanks, Takashi -- 8< -- From: Takashi Iwai <tiwai(a)suse.de> Subject: [PATCH] ALSA: timer: Add missing mutex lock for compat ioctls The races among ioctl and other operations were protected by the commit af368027a49a ("ALSA: timer: Fix race among timer ioctls") and later fixes, but one code path was forgotten in the scenario: the 32bit compat ioctl. As syzkaller recently spotted, a very similar use-after-free may happen with the combination of compat ioctls. The fix is simply to apply the same ioctl_lock to the compat_ioctl callback, too. Fixes: af368027a49a ("ALSA: timer: Fix race among timer ioctls") Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com Reported-by: syzbot <bot+e5f3c9783e7048a74233054febbe9f1bdf54b6da(a)syzkaller.appspotmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/timer_compat.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/sound/core/timer_compat.c b/sound/core/timer_compat.c index 6a437eb66115..59127b6ef39e 100644 --- a/sound/core/timer_compat.c +++ b/sound/core/timer_compat.c @@ -133,7 +133,8 @@ enum { #endif /* CONFIG_X86_X32 */ }; -static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, unsigned long arg) +static long __snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = compat_ptr(arg); @@ -153,7 +154,7 @@ static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, uns case SNDRV_TIMER_IOCTL_PAUSE: case SNDRV_TIMER_IOCTL_PAUSE_OLD: case SNDRV_TIMER_IOCTL_NEXT_DEVICE: - return snd_timer_user_ioctl(file, cmd, (unsigned long)argp); + return __snd_timer_user_ioctl(file, cmd, (unsigned long)argp); case SNDRV_TIMER_IOCTL_GPARAMS32: return snd_timer_user_gparams_compat(file, argp); case SNDRV_TIMER_IOCTL_INFO32: @@ -167,3 +168,15 @@ static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, uns } return -ENOIOCTLCMD; } + +static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct snd_timer_user *tu = file->private_data; + long ret; + + mutex_lock(&tu->ioctl_lock); + ret = __snd_timer_user_ioctl_compat(file, cmd, arg); + mutex_unlock(&tu->ioctl_lock); + return ret; +} -- 2.14.2

2 1

[alsa-devel] [PATCH] SoC: intel: byt: Introduce new custom IN2 map
by Carlo Caione 21 Nov '17

21 Nov '17

From: Carlo Caione <carlo(a)endlessm.com> Introduce a new custom dapm routes map to quirk platforms with the internal mic connected to IN2P. Signed-off-by: Carlo Caione <carlo(a)endlessm.com> --- sound/soc/intel/boards/bytcr_rt5651.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 3076bfc0db5e..1dad5c98c9ef 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -37,6 +37,7 @@ enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, + BYT_RT5651_IN2_MAP, }; #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) @@ -58,6 +59,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk DMIC_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) dev_info(dev, "quirk IN1_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) + dev_info(dev, "quirk IN2_MAP enabled"); if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) dev_info(dev, "quirk DMIC enabled"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) @@ -143,7 +146,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"ssp2 Rx", NULL, "AIF1 Capture"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ - {"IN2P", NULL, "Headset Mic"}, {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Speaker", NULL, "LOUTL"}, @@ -151,15 +153,23 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { }; static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { + {"IN2P", NULL, "Headset Mic"}, {"DMIC L1", NULL, "Internal Mic"}, {"DMIC R1", NULL, "Internal Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, + {"IN2P", NULL, "Headset Mic"}, {"IN1P", NULL, "Internal Mic"}, }; +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { + {"Internal Mic", NULL, "micbias1"}, + {"IN1P", NULL, "Headset Mic"}, + {"IN2P", NULL, "Internal Mic"}, +}; + static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -246,6 +256,10 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; + case BYT_RT5651_IN2_MAP: + custom_map = byt_rt5651_intmic_in2_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); + break; default: custom_map = byt_rt5651_intmic_dmic_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); -- 2.14.2

3 5

[alsa-devel] [PATCH] ALSA: line6: add support for POD HD DESKTOP
by Hans P. Möller Ebner 20 Nov '17

20 Nov '17

Add support for the Line6 POD HD500X multi effect processor for playback and capture (in/out audio) through USB. Signed-off-by: Hans P. Moller <hmoller(a)uc.cl> --- sound/usb/line6/podhd.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/usb/line6/podhd.c b/sound/usb/line6/podhd.c index 956f847..ba4f71f 100644 --- a/sound/usb/line6/podhd.c +++ b/sound/usb/line6/podhd.c @@ -39,7 +39,8 @@ enum { LINE6_PODHD500_1, LINE6_PODX3, LINE6_PODX3LIVE, - LINE6_PODHD500X + LINE6_PODHD500X, + LINE6_PODHDDESKTOP }; struct usb_line6_podhd { @@ -377,6 +378,7 @@ static const struct usb_device_id podhd_id_table[] = { { LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 }, { LINE6_IF_NUM(0x414B, 0), .driver_info = LINE6_PODX3LIVE }, { LINE6_IF_NUM(0x4159, 0), .driver_info = LINE6_PODHD500X }, + { LINE6_IF_NUM(0x4156, 0), .driver_info = LINE6_PODHDDESKTOP }, {} }; @@ -463,6 +465,18 @@ static const struct line6_properties podhd_properties_table[] = { .ep_audio_r = 0x86, .ep_audio_w = 0x02, }, + [LINE6_PODHDDESKTOP] = { + .id = "PODHDDESKTOP", + .name = "POD HDDESKTOP", + .capabilities = LINE6_CAP_CONTROL + | LINE6_CAP_PCM | LINE6_CAP_HWMON, + .altsetting = 1, + .ep_ctrl_r = 0x81, + .ep_ctrl_w = 0x01, + .ctrl_if = 1, + .ep_audio_r = 0x86, + .ep_audio_w = 0x02, + }, }; /* -- 2.7.4

3 3

[alsa-devel] [PATCH] ALSA: via82xx: Use common error handling code in snd_via82xx_create()
by SF Markus Elfring 19 Nov '17

19 Nov '17

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Tue, 22 Aug 2017 19:37:26 +0200 Add jump targets so that a bit of exception handling can be better reused at the end of this function. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring(a)users.sourceforge.net> --- sound/pci/via82xx_modem.c | 33 +++++++++++++++++++-------------- 1 file changed, 19 insertions(+), 14 deletions(-) diff --git a/sound/pci/via82xx_modem.c b/sound/pci/via82xx_modem.c index 55f79b2599e7..8659776887b2 100644 --- a/sound/pci/via82xx_modem.c +++ b/sound/pci/via82xx_modem.c @@ -1110,8 +1110,8 @@ static int snd_via82xx_create(struct snd_card *card, return err; if ((chip = kzalloc(sizeof(*chip), GFP_KERNEL)) == NULL) { - pci_disable_device(pci); - return -ENOMEM; + err = -ENOMEM; + goto disable_device; } spin_lock_init(&chip->reg_lock); @@ -1121,30 +1121,27 @@ static int snd_via82xx_create(struct snd_card *card, if ((err = pci_request_regions(pci, card->driver)) < 0) { kfree(chip); - pci_disable_device(pci); - return err; + goto disable_device; } chip->port = pci_resource_start(pci, 0); if (request_irq(pci->irq, snd_via82xx_interrupt, IRQF_SHARED, KBUILD_MODNAME, chip)) { dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq); - snd_via82xx_free(chip); - return -EBUSY; + err = -EBUSY; + goto free_chip; } chip->irq = pci->irq; if (ac97_clock >= 8000 && ac97_clock <= 48000) chip->ac97_clock = ac97_clock; synchronize_irq(chip->irq); - if ((err = snd_via82xx_chip_init(chip)) < 0) { - snd_via82xx_free(chip); - return err; - } + err = snd_via82xx_chip_init(chip); + if (err < 0) + goto free_chip; - if ((err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops)) < 0) { - snd_via82xx_free(chip); - return err; - } + err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); + if (err < 0) + goto free_chip; /* The 8233 ac97 controller does not implement the master bit * in the pci command register. IMHO this is a violation of the PCI spec. @@ -1153,6 +1150,14 @@ static int snd_via82xx_create(struct snd_card *card, *r_via = chip; return 0; + +disable_device: + pci_disable_device(pci); + goto exit; +free_chip: + snd_via82xx_free(chip); +exit: + return err; } -- 2.14.0

3 6

[alsa-devel] [PATCH 0/7] ALSA: Fine-tuning for several function implementations
by SF Markus Elfring 14 Nov '17

14 Nov '17

From: Markus Elfring <elfring(a)users.sourceforge.net> Date: Tue, 24 Jan 2017 11:02:34 +0100 Some update suggestions were taken into account from static source code analysis. Markus Elfring (7): seq: Delete unnecessary checks in snd_seq_ioctl_query_subs() seq: Delete unnecessary checks in snd_seq_ioctl_get_subscription() seq: Delete unnecessary checks in snd_seq_ioctl_unsubscribe_port() seq: Delete unnecessary checks in snd_seq_ioctl_subscribe_port() seq: Adjust 16 function calls together with a variable assignment dmasound_core: Move two assignments for the variable "ret" in state_open() dmasound_core: Adjust six function calls together with a variable assignment sound/core/seq/seq_clientmgr.c | 163 ++++++++++++++++++++----------------- sound/oss/dmasound/dmasound_core.c | 33 +++++--- 2 files changed, 109 insertions(+), 87 deletions(-) -- 2.11.0

2 9