October 2017 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] Prepare to covert Codec/Platform into Component
by Kuninori Morimoto 09 May '18

09 May '18

Hi Mark, Lars-Peter I will post all prepare patches to convert Codec/Platform into Component. It has 3 steps. 1) add new necessary functions 2) remove/don't use codec hw_write/read 3) remove/don't use codec reg_cache If these are accepted, all prepares were completed. Next, I can post "convert Codec/Platform into Component" patch bomb. These are too many convert patches, to avoid review issue, I will post few of them as sample. 4) sample of don't use rtd->codec 5) sample of convert Platform into Component 6) sample of convert Codec into Component I will post some of "remove" patches too for each steps. I will re-post all "remove" patches if all are accepted. For your review, please consider below. If these are not good, all covert patch doesn't work. 1. use devm_snd_soc_register_component() and remove snd_soc_unregister_component() My patches is using devm_ version function, and removed unregister function. This is not a big deal 2. New flags. Because "Codec" and "CPU/Platform" are using different features, we need to use some new flags. .idle_bias_off/on .ignore_pmdown_time/pmdown_time These are because "CPU/Platform" and "Codec" are using different default value. "Codec" side convert patches are using these. .endianness .non_legacy_dai_naming These are because "Codec" only needs fixup format, and not use "legacy" DAI name. "Codec" side convert patches are using these I added its flags info on each patch. 3. rtd->platform rtd->platform will be removed. Now we can find all rtd connected component by using rtdcom_lookup. rtd->platform will be replaced to snd_soc_rtdcom_lookup(rtd, DRV_NAME); Here, DRV_NAME is platform's component driver name. 4. rtd->codec rtd->codec will be removed. In soc_bind_dai_link(), It is rtd->codec = rtd->codec_dai->codec; And now, DAI has codec and component pointer. So, rtd->codec will be replaced into rtd->codec_dai->component. Best regards --- Kuninori Morimoto

2 104

[alsa-devel] [PATCH 0/x] ASoC: replace platform to component
by Kuninori Morimoto 12 Feb '18

12 Feb '18

Hi Mark These are for replace "platform" to "component". It needs 3 steps I think. step1. "component" needs _add_ function, like "platform" step2. "component" level pcm_new/free support step3. replace platform to component We can get platform pointer from rtd->platform on current style. But these are very categorized pointer, in other words, non generic pointer. This cleanup is 1st step of merging all feature into component. I think new style wil be CPU + Codec + Platform = Component I think merging CPU into Component is already done. This patch set merges Platform feature into Component, and remove Platform. Merging Codec into Component is next step. This patch set will add new rtd connected component list. All CPU/Codec/Platform are connected to this list. And we can get each component pointer by using rtd and its driver name. Here, We can replace rtd->platform like below - struct device *dev = rtd->platform->dev; + struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRIVER_NAME); + struct device *dev = component->dev; - if(rtd->platform->pcm_new) - rtd->platform->pcm_new(yyy); + for_each_rtdcom(rtd, rtdcom) { + component = rtdcom->component; /* rtd connected CPU/Codec/Platform */ + if (component->pcm_new) + component->pcm_new(yyy); + } Now, only platform has pcm_new/free, but in new style, all component can have it. I will post step1/2/3 patch-set. step1 is normal patches. step2/3 are now still [RFC]. Best regards --- Kuninori Morimoto

2 23

[alsa-devel] [PATCH 4/6] alsa-lib:pcm: fix the hw_ptr update until the boundary available.
by sutar.mounesh＠gmail.com 19 Jan '18

19 Jan '18

From: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> For long time test case, the slave_hw_ptr will exceed the boundary and wraparound the slave_hw_ptr. This slave boundary wraparound will cause the rate->hw_ptr to wraparound irrespective of the rate->boundary availability and due to that the available size goes wrong. Hence, To get the correct available size, - Its necessary to increment the rate->hw_ptr upto the rate->boundary and then wraparound the rate->hw_ptr. - While handling fraction part of slave period, rounded value will be introduced by input_frames(). To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Signed-off-by: mahendran.k <mahendran.kuppusamy(a)in.bosch.com> Signed-off-by: Mounesh Sutar <mounesh_sutar(a)mentor.com> diff --git a/src/pcm/pcm_rate.c b/src/pcm/pcm_rate.c index 1f830dd..5bee77c 100644 --- a/src/pcm/pcm_rate.c +++ b/src/pcm/pcm_rate.c @@ -50,7 +50,7 @@ typedef struct _snd_pcm_rate snd_pcm_rate_t; struct _snd_pcm_rate { snd_pcm_generic_t gen; - snd_pcm_uframes_t appl_ptr, hw_ptr; + snd_pcm_uframes_t appl_ptr, hw_ptr, last_slave_hw_ptr; snd_pcm_uframes_t last_commit_ptr; snd_pcm_uframes_t orig_avail_min; snd_pcm_sw_params_t sw_params; @@ -563,14 +563,28 @@ static inline void snd_pcm_rate_sync_hwptr0(snd_pcm_t *pcm, snd_pcm_uframes_t sl { snd_pcm_rate_t *rate = pcm->private_data; + snd_pcm_sframes_t slave_hw_ptr_diff = slave_hw_ptr - rate->last_slave_hw_ptr; + snd_pcm_sframes_t last_slave_hw_ptr_frac; + if (pcm->stream != SND_PCM_STREAM_PLAYBACK) return; - /* FIXME: boundary overlap of slave hw_ptr isn't evaluated here! - * e.g. if slave rate is small... - */ - rate->hw_ptr = - (slave_hw_ptr / rate->gen.slave->period_size) * pcm->period_size + - rate->ops.input_frames(rate->obj, slave_hw_ptr % rate->gen.slave->period_size); + + if (slave_hw_ptr_diff < 0) + slave_hw_ptr_diff += rate->gen.slave->boundary; /* slave boundary wraparound */ + else if (slave_hw_ptr_diff == 0) + return; + last_slave_hw_ptr_frac = rate->last_slave_hw_ptr % rate->gen.slave->period_size; + /* While handling fraction part fo slave period, rounded value will be introduced by input_frames(). + * To eliminate rounding issue on rate->hw_ptr, subtract last rounded value from rate->hw_ptr and + * add new rounded value of present slave_hw_ptr fraction part to rate->hw_ptr. Hence, + * rate->hw_ptr += [ (no. of updated slave periods * pcm rate period size) - + * fractional part of last_slave_hw_ptr rounded value + + * fractional part of updated slave hw ptr's rounded value ] */ + rate->hw_ptr += ( + (((last_slave_hw_ptr_frac + slave_hw_ptr_diff) / rate->gen.slave->period_size) * pcm->period_size) - + rate->ops.input_frames(rate->obj, last_slave_hw_ptr_frac) + + rate->ops.input_frames(rate->obj, (last_slave_hw_ptr_frac + slave_hw_ptr_diff) % rate->gen.slave->period_size)); + rate->last_slave_hw_ptr = slave_hw_ptr; rate->hw_ptr %= pcm->boundary; } @@ -635,6 +649,7 @@ static int snd_pcm_rate_prepare(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; @@ -650,6 +665,7 @@ static int snd_pcm_rate_reset(snd_pcm_t *pcm) return err; *pcm->hw.ptr = 0; *pcm->appl.ptr = 0; + rate->last_slave_hw_ptr = 0; err = snd_pcm_rate_init(pcm); if (err < 0) return err; -- 1.7.9.5

3 2

[alsa-devel] [PATCH] ASoC: nuc900: Fix a loop timeout test
by Dan Carpenter 11 Dec '17

11 Dec '17

We should be finishing the loop with timeout set to zero but because this is a post-op we exit with timeout == -1. Fixes: 1082e2703a2d ("ASoC: NUC900/audio: add nuc900 audio driver support") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> diff --git a/sound/soc/nuc900/nuc900-ac97.c b/sound/soc/nuc900/nuc900-ac97.c index b6615affe571..fde974d52bb2 100644 --- a/sound/soc/nuc900/nuc900-ac97.c +++ b/sound/soc/nuc900/nuc900-ac97.c @@ -67,7 +67,7 @@ static unsigned short nuc900_ac97_read(struct snd_ac97 *ac97, /* polling the AC_R_FINISH */ while (!(AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_R_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout) { @@ -121,7 +121,7 @@ static void nuc900_ac97_write(struct snd_ac97 *ac97, unsigned short reg, /* polling the AC_W_FINISH */ while ((AUDIO_READ(nuc900_audio->mmio + ACTL_ACCON) & AC_W_FINISH) - && timeout--) + && --timeout) mdelay(1); if (!timeout)

2 1

[alsa-devel] Cherry Trail + RT5645 devices with a mono speaker ?
by Hans de Goede 08 Dec '17

08 Dec '17

Hi Pierre-Louis, Bard, I've been looking into getting some Cherry Trail + RT5645 devices with a mono speaker I have to work properly. Specifically the goal is to mix the right channel into the left output, so that sounds which are only played over the right channel do not get lost. I'm using this UCM file: https://github.com/plbossart/UCM/blob/master/byt-rt5640/HiFi Looking at the rtl5640 UCM file, getting the mono speaker to work (in a first simple attempt) should be as simple as replacing: cset "name='SPOR MIX SPKVOL R Switch' on" With cset "name='SPOL MIX SPKVOL R Switch' on" But this does not work, the speaker test sound for the right speaker is still silent (works with headphones). I've also looked into directly poking the RT5645_SPO_MIXER i2c register for testing, but when checking its value with the original unmodified UCM file: [root@localhost ~]# i2cget -y -f 1 0x1a 0x48 w 0x06c8 That is: 0xc806 as the output of i2cget "w" mode needs byteswapping. Note that both the RT5645_M_SV_L_SPM_L and RT5645_M_SV_R_SPM_L bits are already cleared, which is weird as this is before I've modified anything. Also the RT5645_M_SV_R_SPM_R bit is cleared, but that is expected. Even if I manually set reg 0x48 to 0x07c8 which AFAIK should enable output of both left and right channels on the left speaker I still only get sounds played on the left channel. Any insights / help with this would be very much welcome. Regards, Hans

2 7

[alsa-devel] [PATCH] ASoC: fsl_asrc: protect macro argument
by Stefan Agner 06 Dec '17

06 Dec '17

Protect macro argument with parentheses to avoid ambiguity. This fixes a warning seen with clang: warning: logical not is only applied to the left hand side of this comparison Signed-off-by: Stefan Agner <stefan(a)agner.ch> --- sound/soc/fsl/fsl_asrc.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h index 0f163abe4ba3..ec33dab4b909 100644 --- a/sound/soc/fsl/fsl_asrc.h +++ b/sound/soc/fsl/fsl_asrc.h @@ -57,7 +57,7 @@ #define REG_ASRDOC 0x74 #define REG_ASRDI(i) (REG_ASRDIA + (i << 3)) #define REG_ASRDO(i) (REG_ASRDOA + (i << 3)) -#define REG_ASRDx(x, i) (x == IN ? REG_ASRDI(i) : REG_ASRDO(i)) +#define REG_ASRDx(x, i) ((x) == IN ? REG_ASRDI(i) : REG_ASRDO(i)) #define REG_ASRIDRHA 0x80 #define REG_ASRIDRLA 0x84 -- 2.13.3

3 7

[alsa-devel] [PATCH] ASoC: fsl_ssi: Override bit clock rate based on slot number
by Nicolin Chen 26 Nov '17

26 Nov '17

The set_sysclk() now is used to override the output bit clock rate. But this is not a common way to implement a set_dai_sysclk(). And this creates a problem when a general machine driver (simple-card for example) tries to do set_dai_sysclk() by passing an input clock rate for the baud clock instead of setting the bit clock rate as fsl_ssi driver expected. So this patch solves this problem by firstly removing set_sysclk() since the hw_params() can calculate the bit clock rate. Secondly, in order not to break those TDM use cases which previously might have been using set_sysclk() to override the bit clock rate, this patch changes the driver to override it based on the slot number. The patch also removes an obsolete comment of the dir parameter. Signed-off-by: Nicolin Chen <nicoleotsuka(a)gmail.com> --- sound/soc/fsl/fsl_ssi.c | 26 ++++++++------------------ 1 file changed, 8 insertions(+), 18 deletions(-) diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 64598d1..3657c88 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -197,12 +197,12 @@ struct fsl_ssi_soc_data { * @use_dma: DMA is used or FIQ with stream filter * @use_dual_fifo: DMA with support for both FIFOs used * @fifo_deph: Depth of the SSI FIFOs + * @slots: number of slots * @rxtx_reg_val: Specific register settings for receive/transmit configuration * * @clk: SSI clock * @baudclk: SSI baud clock for master mode * @baudclk_streams: Active streams that are using baudclk - * @bitclk_freq: bitclock frequency set by .set_dai_sysclk * * @dma_params_tx: DMA transmit parameters * @dma_params_rx: DMA receive parameters @@ -233,12 +233,12 @@ struct fsl_ssi_private { bool use_dual_fifo; bool has_ipg_clk_name; unsigned int fifo_depth; + unsigned int slots; struct fsl_ssi_rxtx_reg_val rxtx_reg_val; struct clk *clk; struct clk *baudclk; unsigned int baudclk_streams; - unsigned int bitclk_freq; /* regcache for volatile regs */ u32 regcache_sfcsr; @@ -700,8 +700,7 @@ static void fsl_ssi_shutdown(struct snd_pcm_substream *substream, * Note: This function can be only called when using SSI as DAI master * * Quick instruction for parameters: - * freq: Output BCLK frequency = samplerate * 32 (fixed) * channels - * dir: SND_SOC_CLOCK_OUT -> TxBCLK, SND_SOC_CLOCK_IN -> RxBCLK. + * freq: Output BCLK frequency = samplerate * 32 (fixed) * slots (or channels) */ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai, @@ -716,9 +715,9 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, unsigned int freq; bool baudclk_is_used; - /* Prefer the explicitly set bitclock frequency */ - if (ssi_private->bitclk_freq) - freq = ssi_private->bitclk_freq; + /* Generate bit clock based on the slot or channel number */ + if (ssi_private->slots) + freq = ssi_private->slots * 32 * params_rate(hw_params); else freq = params_channels(hw_params) * 32 * params_rate(hw_params); @@ -805,16 +804,6 @@ static int fsl_ssi_set_bclk(struct snd_pcm_substream *substream, return 0; } -static int fsl_ssi_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - struct fsl_ssi_private *ssi_private = snd_soc_dai_get_drvdata(cpu_dai); - - ssi_private->bitclk_freq = freq; - - return 0; -} - /** * fsl_ssi_hw_params - program the sample size * @@ -1121,6 +1110,8 @@ static int fsl_ssi_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, u32 tx_mask, regmap_update_bits(regs, CCSR_SSI_SCR, CCSR_SSI_SCR_SSIEN, val); + ssi_private->slots = slots; + return 0; } @@ -1191,7 +1182,6 @@ static const struct snd_soc_dai_ops fsl_ssi_dai_ops = { .hw_params = fsl_ssi_hw_params, .hw_free = fsl_ssi_hw_free, .set_fmt = fsl_ssi_set_dai_fmt, - .set_sysclk = fsl_ssi_set_dai_sysclk, .set_tdm_slot = fsl_ssi_set_dai_tdm_slot, .trigger = fsl_ssi_trigger, }; -- 2.7.4

4 10

[alsa-devel] LADSPA ALSA plugin
by Robert Bielik 26 Nov '17

26 Nov '17

Hi all, Started experimenting with using LADSPA plugins with the ALSA LADSPA PCM plugin, and it works nicely. However, it seems only the PCM is interface is exposed from the plugin. Question is if there is a way to expose the LADSPA plugin parameters directly to alsamixer ? Regards /Rob

1 1

Re: [alsa-devel] KASAN: use-after-free Read in snd_timer_user_info_compat
by Takashi Iwai 21 Nov '17

21 Nov '17

On Fri, 27 Oct 2017 10:34:01 +0200, syzbot wrote: > > Hello, > > syzkaller hit the following crash on > 33d930e59a98fa10a0db9f56c7fa2f21a4aef9b9 > git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/master > compiler: gcc (GCC) 7.1.1 20170620 > .config is attached > Raw console output is attached. > > syzkaller reproducer is attached. See https://goo.gl/kgGztJ > for information about syzkaller reproducers > > > BUG: KASAN: use-after-free in > snd_timer_user_info_compat.isra.6+0x46c/0x480 > sound/core/timer_compat.c:71 > Read of size 8 at addr ffff8801d0dd9d00 by task syz-executor0/3342 OK, this is a real bug, and obviously a forgotten code path from the previous fixes. The patch below should address it, but I checked only compile-tested, so far. Let me know if it really works. thanks, Takashi -- 8< -- From: Takashi Iwai <tiwai(a)suse.de> Subject: [PATCH] ALSA: timer: Add missing mutex lock for compat ioctls The races among ioctl and other operations were protected by the commit af368027a49a ("ALSA: timer: Fix race among timer ioctls") and later fixes, but one code path was forgotten in the scenario: the 32bit compat ioctl. As syzkaller recently spotted, a very similar use-after-free may happen with the combination of compat ioctls. The fix is simply to apply the same ioctl_lock to the compat_ioctl callback, too. Fixes: af368027a49a ("ALSA: timer: Fix race among timer ioctls") Reference: http://lkml.kernel.org/r/089e082686ac9b482e055c832617@google.com Reported-by: syzbot <bot+e5f3c9783e7048a74233054febbe9f1bdf54b6da(a)syzkaller.appspotmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- sound/core/timer_compat.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/sound/core/timer_compat.c b/sound/core/timer_compat.c index 6a437eb66115..59127b6ef39e 100644 --- a/sound/core/timer_compat.c +++ b/sound/core/timer_compat.c @@ -133,7 +133,8 @@ enum { #endif /* CONFIG_X86_X32 */ }; -static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, unsigned long arg) +static long __snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, + unsigned long arg) { void __user *argp = compat_ptr(arg); @@ -153,7 +154,7 @@ static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, uns case SNDRV_TIMER_IOCTL_PAUSE: case SNDRV_TIMER_IOCTL_PAUSE_OLD: case SNDRV_TIMER_IOCTL_NEXT_DEVICE: - return snd_timer_user_ioctl(file, cmd, (unsigned long)argp); + return __snd_timer_user_ioctl(file, cmd, (unsigned long)argp); case SNDRV_TIMER_IOCTL_GPARAMS32: return snd_timer_user_gparams_compat(file, argp); case SNDRV_TIMER_IOCTL_INFO32: @@ -167,3 +168,15 @@ static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, uns } return -ENOIOCTLCMD; } + +static long snd_timer_user_ioctl_compat(struct file *file, unsigned int cmd, + unsigned long arg) +{ + struct snd_timer_user *tu = file->private_data; + long ret; + + mutex_lock(&tu->ioctl_lock); + ret = __snd_timer_user_ioctl_compat(file, cmd, arg); + mutex_unlock(&tu->ioctl_lock); + return ret; +} -- 2.14.2

2 1

[alsa-devel] [PATCH] SoC: intel: byt: Introduce new custom IN2 map
by Carlo Caione 21 Nov '17

21 Nov '17

From: Carlo Caione <carlo(a)endlessm.com> Introduce a new custom dapm routes map to quirk platforms with the internal mic connected to IN2P. Signed-off-by: Carlo Caione <carlo(a)endlessm.com> --- sound/soc/intel/boards/bytcr_rt5651.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 3076bfc0db5e..1dad5c98c9ef 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -37,6 +37,7 @@ enum { BYT_RT5651_DMIC_MAP, BYT_RT5651_IN1_MAP, + BYT_RT5651_IN2_MAP, }; #define BYT_RT5651_MAP(quirk) ((quirk) & GENMASK(7, 0)) @@ -58,6 +59,8 @@ static void log_quirks(struct device *dev) dev_info(dev, "quirk DMIC_MAP enabled"); if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN1_MAP) dev_info(dev, "quirk IN1_MAP enabled"); + if (BYT_RT5651_MAP(byt_rt5651_quirk) == BYT_RT5651_IN2_MAP) + dev_info(dev, "quirk IN2_MAP enabled"); if (byt_rt5651_quirk & BYT_RT5651_DMIC_EN) dev_info(dev, "quirk DMIC enabled"); if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) @@ -143,7 +146,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { {"ssp2 Rx", NULL, "AIF1 Capture"}, {"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */ - {"IN2P", NULL, "Headset Mic"}, {"Headphone", NULL, "HPOL"}, {"Headphone", NULL, "HPOR"}, {"Speaker", NULL, "LOUTL"}, @@ -151,15 +153,23 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = { }; static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic_map[] = { + {"IN2P", NULL, "Headset Mic"}, {"DMIC L1", NULL, "Internal Mic"}, {"DMIC R1", NULL, "Internal Mic"}, }; static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = { {"Internal Mic", NULL, "micbias1"}, + {"IN2P", NULL, "Headset Mic"}, {"IN1P", NULL, "Internal Mic"}, }; +static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_map[] = { + {"Internal Mic", NULL, "micbias1"}, + {"IN1P", NULL, "Headset Mic"}, + {"IN2P", NULL, "Internal Mic"}, +}; + static const struct snd_kcontrol_new byt_rt5651_controls[] = { SOC_DAPM_PIN_SWITCH("Headphone"), SOC_DAPM_PIN_SWITCH("Headset Mic"), @@ -246,6 +256,10 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) custom_map = byt_rt5651_intmic_in1_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map); break; + case BYT_RT5651_IN2_MAP: + custom_map = byt_rt5651_intmic_in2_map; + num_routes = ARRAY_SIZE(byt_rt5651_intmic_in2_map); + break; default: custom_map = byt_rt5651_intmic_dmic_map; num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic_map); -- 2.14.2

3 5