February 2016 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] a52: Make compatible with ffmpeg 3.0
by Anatol Pomozov 01 Apr '16

01 Apr '16

audioconvert.h has been deprecated a while ago and got removed in ffmpeg 3.0 (commit 2d40968dd3ff17b12f7). Signed-off-by: Anatol Pomozov <anatol.pomozov(a)gmail.com> --- a52/pcm_a52.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/a52/pcm_a52.c b/a52/pcm_a52.c index 88529eb..6fad77d 100644 --- a/a52/pcm_a52.c +++ b/a52/pcm_a52.c @@ -39,7 +39,7 @@ #endif #if LIBAVCODEC_VERSION_INT >= AV_VERSION_INT(53, 34, 0) -#include <libavutil/audioconvert.h> +#include <libavutil/channel_layout.h> #include <libavutil/mem.h> #define USE_AVCODEC_FRAME #endif -- 2.7.1

3 3

[alsa-devel] [PATCH] ASoC: rt5645: Add dmi_system_id "Google Setzer"
by John Lin 23 Mar '16

23 Mar '16

Add platform specific data for Setzer project. Signed-off-by: John Lin <john.lin(a)realtek.com> --- sound/soc/codecs/rt5645.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 93e8c90..75e5a4a 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3552,6 +3552,12 @@ static const struct dmi_system_id dmi_platform_intel_braswell[] = { DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"), }, }, + { + .ident = "Google Setzer", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"), + }, + }, { } }; -- 1.8.1.1.439.g50a6b54

2 1

[alsa-devel] [RFC PATCH 0/3] ASoC: pcm1792a: Add support for pcm1795 and pcm1796
by Michael Trimarchi 18 Mar '16

18 Mar '16

Those patches add support for pcm1795 and pcm1796. Both are compatible with the pcm1792a with a minor change for the pcm1795 Michael Trimarchi (3): ASoC: pcm1792a: Rename internal data and function to pcm179x ASoC: pcm1792a: Rename pcm1792a to pcm179x ASoC: pcm179x: Add support for pcm1795 and pcm1796 .../devicetree/bindings/sound/pcm1792a.txt | 18 -- .../devicetree/bindings/sound/pcm179x.txt | 18 ++ sound/soc/codecs/Kconfig | 6 +- sound/soc/codecs/Makefile | 4 +- sound/soc/codecs/pcm1792a.c | 271 ------------------ sound/soc/codecs/pcm1792a.h | 27 -- sound/soc/codecs/pcm179x.c | 314 +++++++++++++++++++++ sound/soc/codecs/pcm179x.h | 31 ++ 8 files changed, 368 insertions(+), 321 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/pcm1792a.txt create mode 100644 Documentation/devicetree/bindings/sound/pcm179x.txt delete mode 100644 sound/soc/codecs/pcm1792a.c delete mode 100644 sound/soc/codecs/pcm1792a.h create mode 100644 sound/soc/codecs/pcm179x.c create mode 100644 sound/soc/codecs/pcm179x.h -- 2.7.0

4 21

[alsa-devel] [PATCH 1/1] sst: select DW_DMAC_CORE since it's mandatory
by Andy Shevchenko 18 Mar '16

18 Mar '16

While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Signed-off-by: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> --- sound/soc/intel/Kconfig | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig index 05fde5e6e..bc5281e 100644 --- a/sound/soc/intel/Kconfig +++ b/sound/soc/intel/Kconfig @@ -35,15 +35,17 @@ config SND_SOC_INTEL_SST_ACPI config SND_SOC_INTEL_HASWELL tristate + select DW_DMAC_CORE + select SND_SOC_INTEL_SST config SND_SOC_INTEL_BAYTRAIL tristate + select DW_DMAC_CORE + select SND_SOC_INTEL_SST config SND_SOC_INTEL_HASWELL_MACH tristate "ASoC Audio DSP support for Intel Haswell Lynxpoint" depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM - depends on DW_DMAC_CORE - select SND_SOC_INTEL_SST select SND_SOC_INTEL_HASWELL select SND_SOC_RT5640 help @@ -55,8 +57,6 @@ config SND_SOC_INTEL_HASWELL_MACH config SND_SOC_INTEL_BYT_RT5640_MACH tristate "ASoC Audio driver for Intel Baytrail with RT5640 codec" depends on X86_INTEL_LPSS && I2C - depends on DW_DMAC_CORE - select SND_SOC_INTEL_SST select SND_SOC_INTEL_BAYTRAIL select SND_SOC_RT5640 help @@ -66,8 +66,6 @@ config SND_SOC_INTEL_BYT_RT5640_MACH config SND_SOC_INTEL_BYT_MAX98090_MACH tristate "ASoC Audio driver for Intel Baytrail with MAX98090 codec" depends on X86_INTEL_LPSS && I2C - depends on DW_DMAC_CORE - select SND_SOC_INTEL_SST select SND_SOC_INTEL_BAYTRAIL select SND_SOC_MAX98090 help @@ -76,10 +74,7 @@ config SND_SOC_INTEL_BYT_MAX98090_MACH config SND_SOC_INTEL_BROADWELL_MACH tristate "ASoC Audio DSP support for Intel Broadwell Wildcatpoint" - depends on X86_INTEL_LPSS && I2C && DW_DMAC && \ - I2C_DESIGNWARE_PLATFORM - depends on DW_DMAC_CORE - select SND_SOC_INTEL_SST + depends on X86_INTEL_LPSS && I2C && I2C_DESIGNWARE_PLATFORM select SND_SOC_INTEL_HASWELL select SND_SOC_RT286 help -- 2.5.1

2 2

[alsa-devel] [PATCH v3 00/22] Sharing media resources across ALSA and au0828 drivers
by Shuah Khan 17 Mar '16

17 Mar '16

This patch series updates ALSA driver, and au0828 core driver to use Managed Media controller API and Media Controller API to share media resource (tuner). This Patch v3 series is based on linux_media master. This work addresses Mauro and Takashi's comments on Patch v2 series. Changes since Patch v2 series: - Added documentation for uapi and new MC interfaces 1. Ran make for documentation and Mauro's doc script. Thanks for sharing the script. - Updated commit logs as needed for clarity. - media: v4l-core add enable/disable source common interfaces Addressed comments - added static inlines in header file - media: dvb-frontend invoke enable/disable_source handlers Moved the patch after enable/disable handlers and left pipe in dvb_frontend_private - media: au0828 video remove au0828_enable_analog_tuner() and media: au0828 video change to use v4l_enable_media_source() 1. Collapsed these two patches - it doesn't make sense to keep them separate. Also added FIXME as per Mauro's suggestion. - media: au0828 change to use Managed Media Controller API 1. Added comment explaining the need for using udev->product instead of dev->board.name - media: au0828 add enable, disable source handlers 1. Changed to handle S-Video and Composite inputs. 2. Fixed a bug that lets Video in when ALSA holds the source. 3. Added comments to one FIXME for s_input changes. Fix is in progress and will send it in a day or two combined with other issues found in au0828 video in the way it handles input. Doesn't impact this routine, changes are all in au0828-video. - sound/usb: Use Media Controller API to share media resources 1. Addressed comments from Mauro and Takashi about void pointer use. 2. Fixed kbuildbot error when MEDIA_SUPPORT=m - Dropped media: Ensure media device unregister is done only once Device removal worked without any changes to media unregister path. This work isn't necessary. Shuah Khan (22): [media] Docbook: media-types.xml: Add ALSA Media Controller Intf types uapi/media.h: Declare interface types for ALSA [media] Docbook: media-types.xml: Add Audio Function Entities media: Add ALSA Media Controller function entities media: Media Controller register/unregister entity_notify API media: Media Controller enable/disable source handler API media: Media Controller export non locking __media_entity_setup_link() edia: Media Controller non-locking __media_entity_pipeline_start/stop() media: v4l-core add enable/disable source common interfaces media: Move au8522_media_pads enum to au8522.h from au8522_priv.h media: au8522 change to create MC pad for ALSA Audio Out media: au0828 Use au8522_media_pads enum for pad defines media: Change v4l-core to check if source is free media: au0828 change to use Managed Media Controller API media: au0828 handle media_init and media_register window media: au0828 create tuner to decoder link in disabled state media: au0828 disable tuner to demod link media: au0828-core register entity_notify hook media: au0828 add enable, disable source handlers media: dvb-frontend invoke enable/disable_source handlers media: au0828 video change to use v4l_enable_media_source() sound/usb: Use Media Controller API to share media resources Documentation/DocBook/media/v4l/media-types.xml | 52 ++++ drivers/media/dvb-core/dvb_frontend.c | 135 ++-------- drivers/media/dvb-frontends/au8522.h | 8 + drivers/media/dvb-frontends/au8522_decoder.c | 1 + drivers/media/dvb-frontends/au8522_priv.h | 8 - drivers/media/media-device.c | 42 +++ drivers/media/media-entity.c | 51 +++- drivers/media/usb/au0828/au0828-core.c | 325 ++++++++++++++++++++++-- drivers/media/usb/au0828/au0828-video.c | 102 +++----- drivers/media/usb/au0828/au0828.h | 6 + drivers/media/v4l2-core/Makefile | 1 + drivers/media/v4l2-core/v4l2-fh.c | 2 + drivers/media/v4l2-core/v4l2-ioctl.c | 30 +++ drivers/media/v4l2-core/v4l2-mc.c | 52 ++++ drivers/media/v4l2-core/videobuf2-core.c | 4 + include/media/media-device.h | 86 +++++++ include/media/media-entity.h | 19 ++ include/media/v4l2-dev.h | 1 + include/media/v4l2-mc.h | 65 +++++ include/uapi/linux/media.h | 17 ++ sound/usb/Kconfig | 4 + sound/usb/Makefile | 2 + sound/usb/card.c | 14 + sound/usb/card.h | 3 + sound/usb/media.c | 318 +++++++++++++++++++++++ sound/usb/media.h | 72 ++++++ sound/usb/mixer.h | 3 + sound/usb/pcm.c | 28 +- sound/usb/quirks-table.h | 1 + sound/usb/stream.c | 2 + sound/usb/usbaudio.h | 6 + 31 files changed, 1240 insertions(+), 220 deletions(-) create mode 100644 drivers/media/v4l2-core/v4l2-mc.c create mode 100644 sound/usb/media.c create mode 100644 sound/usb/media.h -- 2.5.0

5 46

[alsa-devel] [PATCH] ASoC: nau8825: add crosstalk suppression feature
by John Hsu 17 Mar '16

17 Mar '16

Add crosstalk signal suppression function. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- sound/soc/codecs/nau8825.c | 403 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/nau8825.h | 77 ++++++++- 2 files changed, 479 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index d270f63..81554be 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -82,6 +82,380 @@ static const struct nau8825_fll_attr fll_pre_scalar[] = { { 8, 0x3 }, }; +/* Crosstalk detection */ +#define LOG10_MAGIC 646456993 +#define GAIN_AUGMENT 22500 +#define SIDETONE_BASE 207000 + +static struct reg_default nau8825_xtalk_baktab[] = { + { NAU8825_REG_FLL6, 0 }, + { NAU8825_REG_CLK_DIVIDER, 0 }, + { NAU8825_REG_ADC_DGAIN_CTRL, 0 }, + { NAU8825_REG_HSVOL_CTRL, 0 }, + { NAU8825_REG_DACL_CTRL, 0 }, + { NAU8825_REG_DACR_CTRL, 0 }, + { NAU8825_REG_CLASSG_CTRL, 0 }, +}; + +static const struct reg_default nau8825_biq_reg[] = { + { NAU8825_REG_BIQ_CTRL, 0x0000 }, + { NAU8825_REG_BIQ_COF1, 0x009B }, + { NAU8825_REG_BIQ_COF2, 0x0006 }, + { NAU8825_REG_BIQ_COF3, 0xff66 }, + { NAU8825_REG_BIQ_COF4, 0x0000 }, + { NAU8825_REG_BIQ_COF5, 0xffb3 }, + { NAU8825_REG_BIQ_COF6, 0x0000 }, + { NAU8825_REG_BIQ_COF7, 0x009A }, + { NAU8825_REG_BIQ_COF8, 0x0006 }, + { NAU8825_REG_BIQ_COF9, 0xffb3 }, + { NAU8825_REG_BIQ_COF10, 0x8000 }, + { NAU8825_REG_BIQ_CTRL, 0x0010 }, +}; + +static const unsigned short logtable[256] = { + 0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7, + 0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508, + 0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6, + 0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37, + 0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f, + 0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41, + 0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1, + 0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142, + 0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68, + 0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355, + 0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c, + 0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490, + 0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3, + 0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507, + 0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe, + 0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca, + 0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c, + 0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7, + 0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c, + 0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c, + 0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a, + 0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065, + 0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730, + 0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc, + 0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469, + 0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9, + 0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c, + 0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765, + 0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83, + 0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387, + 0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973, + 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 +}; + +/** + * computes log10 of a value; the result is round off to 3 decimal. + * this function takes reference to dvb-math. + * + * @return log10(value) * 1000 + */ +static u32 nau8825_intlog10_dec3(u32 value) +{ + u32 msb, logentry, significand, interpolation, log10val; + u64 log2val; + + msb = fls(value) - 1; + significand = value << (31 - msb); + logentry = (significand >> 23) & 0xff; + interpolation = ((significand & 0x7fffff) * + ((logtable[(logentry + 1) & 0xff] - + logtable[logentry]) & 0xffff)) >> 15; + + log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation); + log10val = (log2val * LOG10_MAGIC) >> 31; + return log10val / ((1 << 24) / 1000); +} + +/** + * computes cross-talk sidetone with orignal and cross-talk signal + * + * @sig_org: orignal signal + * @sig_cros: cross-talk signal + * + * return cross-talk sidetone + */ +static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros) +{ + u32 gain, sidetone; + + if (unlikely(sig_org == 0) || unlikely(sig_cros == 0)) { + WARN_ON(1); + return 0; + } + + sig_org = nau8825_intlog10_dec3(sig_org); + sig_cros = nau8825_intlog10_dec3(sig_cros); + gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT; + sidetone = SIDETONE_BASE - gain * 2; + sidetone /= 1000; + + return sidetone; +} + +static void nau8825_xtalk_backup(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) + regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + &nau8825_xtalk_baktab[i].def); +} + +static void nau8825_xtalk_restore(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) + regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + nau8825_xtalk_baktab[i].def); +} + +static void nau8825_xtalk_biq_apply(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_biq_reg); i++) + regmap_write(nau8825->regmap, nau8825_biq_reg[i].reg, + nau8825_biq_reg[i].def); +} + +static void nau8825_xtalk_biq_cancel(struct nau8825 *nau8825) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(nau8825_biq_reg); i++) + regmap_write(nau8825->regmap, nau8825_biq_reg[i].reg, 0); +} + +static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDACL_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | + NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK | + NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR | + NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L | + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L | + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0); +} + +static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB); +} + +static void nau8825_xtalk_clock(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_DCO_EN, NAU8825_DCO_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, + NAU8825_CLK_SRC_VCO | 0x3); +} + +static void nau8825_xtalk_prepare(struct nau8825 *nau8825) +{ + /* backup value of specific register used by cross-talk */ + nau8825_xtalk_backup(nau8825); + nau8825_xtalk_clock(nau8825); + nau8825_xtalk_prepare_dac(nau8825); + nau8825_xtalk_prepare_adc(nau8825); + /* Config channel */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_MASK, NAU8825_DACR_CH_SEL_R); + /* Config headphone volume */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, 0x0492); + /* Config IIS parameter */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_DRV_MASK | NAU8825_I2S_BLK_DIV_MASK, + (0x2 << NAU8825_I2S_DRV_SFT) | 0x1); + /* Config crosstalk */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_THD_MASK | NAU8825_IMM_CYC_MASK | + NAU8825_IMM_DAC_SRC_MASK, (0x2 << NAU8825_IMM_THD_SFT) | + NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN); + regmap_update_bits(nau8825->regmap, + NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0); + nau8825_xtalk_biq_apply(nau8825); +} + +static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL | + NAU8825_JAMNODCLOW); + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_CHANRGE_PUMP_EN, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP | + NAU8825_BIAS_TESTDAC_EN, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0); + if (!nau8825->irq) + regmap_update_bits(nau8825->regmap, + NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_DACR, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0); +} + +static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); +} + +static void nau8825_xtalk_clean(struct nau8825 *nau8825) +{ + /* restore value of specific register for cross-talk */ + nau8825_xtalk_restore(nau8825); + nau8825_xtalk_clean_dac(nau8825); + nau8825_xtalk_clean_adc(nau8825); + regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK | NAU8825_I2S_DRV_MASK | + NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + nau8825_xtalk_biq_cancel(nau8825); +} + +static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL, + NAU8825_ADC_DIG_VOL_MASK, vol); + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_HPR_R2L: + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPR_IMP); + break; + case NAU8825_XTALK_HPL_R2L: + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPL_IMP); + break; + default: + break; + } + msleep(100); + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_EN, NAU8825_IMM_EN); +} + +static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825) +{ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0); +} + +static void nau8825_xtalk_measure(struct nau8825 *nau8825) +{ + u32 sidetone; + + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_DONE: + nau8825_xtalk_prepare(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L; + msleep(280); + nau8825_xtalk_imm_start(nau8825, 0x00d2); + break; + case NAU8825_XTALK_HPR_R2L: + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + nau8825_xtalk_imm_stop(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L; + nau8825_xtalk_imm_start(nau8825, 0x00ff); + break; + case NAU8825_XTALK_HPL_R2L: + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + nau8825_xtalk_imm_stop(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_IMM; + break; + case NAU8825_XTALK_IMM: + sidetone = nau8825_xtalk_sidetone( + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L], + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "cross-talk sidetone: %x\n", sidetone); + regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, + (sidetone << 8) | sidetone); + nau8825_xtalk_clean(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_DONE; + break; + default: + break; + } +} + +static void nau8825_xtalk_work(struct work_struct *work) +{ + struct nau8825 *nau8825 = container_of( + work, struct nau8825, xtalk_work); + + nau8825_xtalk_measure(nau8825); + if (nau8825->xtalk_state == NAU8825_XTALK_IMM) + nau8825_xtalk_measure(nau8825); +} + + static const struct reg_default nau8825_reg_defaults[] = { { NAU8825_REG_ENA_CTRL, 0x00ff }, { NAU8825_REG_IIC_ADDR_SET, 0x0 }, @@ -211,6 +585,7 @@ static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) case NAU8825_REG_RESET: case NAU8825_REG_IRQ_STATUS: case NAU8825_REG_INT_CLR_KEY_STATUS: + case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: case NAU8825_REG_IMM_RMS_L: case NAU8825_REG_IMM_RMS_R: case NAU8825_REG_I2C_DEVICE_ID: @@ -741,6 +1116,10 @@ static int nau8825_jack_insert(struct nau8825 *nau8825) regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg); mic_detected = (jack_status_reg >> 10) & 3; + if (mic_detected == 0x3) + nau8825->high_imped = 1; + else + nau8825->high_imped = 0; switch (mic_detected) { case 0: @@ -836,6 +1215,10 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { if (nau8825_is_jack_inserted(regmap)) { event |= nau8825_jack_insert(nau8825); + if (!nau8825->high_imped) { + nau8825->xtalk_state = NAU8825_XTALK_DONE; + schedule_work(&nau8825->xtalk_work); + } } else { dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n"); nau8825_eject_jack(nau8825); @@ -843,6 +1226,9 @@ static irqreturn_t nau8825_interrupt(int irq, void *data) event_mask |= SND_JACK_HEADSET; clear_irq = NAU8825_HEADSET_COMPLETION_IRQ; + } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { + schedule_work(&nau8825->xtalk_work); + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; } if (!clear_irq) @@ -901,6 +1287,11 @@ static void nau8825_init_regs(struct nau8825 *nau8825) /* Latch IIC LSB value */ regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001); + /* Config channel */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_MASK, NAU8825_DACR_CH_SEL_R); /* Enable Bias/Vmid */ regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, NAU8825_BIAS_VMID, NAU8825_BIAS_VMID); @@ -1007,6 +1398,17 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec) regmap_write(nau8825->regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0); nau8825_restart_jack_detection(nau8825->regmap); + INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work); + + return 0; +} + +static int nau8825_codec_remove(struct snd_soc_codec *codec) +{ + struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec); + + cancel_work_sync(&nau8825->xtalk_work); + return 0; } @@ -1326,6 +1728,7 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, static struct snd_soc_codec_driver nau8825_codec_driver = { .probe = nau8825_codec_probe, + .remove = nau8825_codec_remove, .set_sysclk = nau8825_set_sysclk, .set_pll = nau8825_set_pll, .set_bias_level = nau8825_set_bias_level, diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index 029134a..808474d 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -98,7 +98,13 @@ #define NAU8825_ENABLE_DACR_SFT 10 #define NAU8825_ENABLE_DACR (1 << NAU8825_ENABLE_DACR_SFT) #define NAU8825_ENABLE_DACL_SFT 9 +#define NAU8825_ENABLE_DACL (1 << NAU8825_ENABLE_DACL_SFT) #define NAU8825_ENABLE_ADC_SFT 8 +#define NAU8825_ENABLE_ADC (1 << NAU8825_ENABLE_ADC_SFT) +#define NAU8825_ENABLE_ADC_CLK_SFT 7 +#define NAU8825_ENABLE_ADC_CLK (1 << NAU8825_ENABLE_ADC_CLK_SFT) +#define NAU8825_ENABLE_DAC_CLK_SFT 6 +#define NAU8825_ENABLE_DAC_CLK (1 << NAU8825_ENABLE_DAC_CLK_SFT) #define NAU8825_ENABLE_SAR_SFT 1 /* CLK_DIVIDER (0x3) */ @@ -153,6 +159,7 @@ /* INTERRUPT_MASK (0xf) */ #define NAU8825_IRQ_OUTPUT_EN (1 << 11) #define NAU8825_IRQ_HEADSET_COMPLETE_EN (1 << 10) +#define NAU8825_IRQ_RMS_EN (1 << 8) #define NAU8825_IRQ_KEY_RELEASE_EN (1 << 7) #define NAU8825_IRQ_KEY_SHORT_PRESS_EN (1 << 5) #define NAU8825_IRQ_EJECT_EN (1 << 2) @@ -225,10 +232,13 @@ /* I2S_PCM_CTRL2 (0x1d) */ #define NAU8825_I2S_TRISTATE (1 << 15) /* 0 - normal mode, 1 - Hi-Z output */ +#define NAU8825_I2S_DRV_SFT 12 +#define NAU8825_I2S_DRV_MASK (0x3 << NAU8825_I2S_DRV_SFT) #define NAU8825_I2S_MS_SFT 3 #define NAU8825_I2S_MS_MASK (1 << NAU8825_I2S_MS_SFT) #define NAU8825_I2S_MS_MASTER (1 << NAU8825_I2S_MS_SFT) #define NAU8825_I2S_MS_SLAVE (0 << NAU8825_I2S_MS_SFT) +#define NAU8825_I2S_BLK_DIV_MASK 0x7 /* ADC_RATE (0x2b) */ #define NAU8825_ADC_SYNC_DOWN_SFT 0 @@ -247,22 +257,66 @@ #define NAU8825_DAC_OVERSAMPLE_128 2 #define NAU8825_DAC_OVERSAMPLE_32 4 +/* ADC_DGAIN_CTRL (0x30) */ +#define NAU8825_ADC_DAC_ST1_SFT 12 +#define NAU8825_ADC_DAC_ST1_MASK 0xf +#define NAU8825_ADC_DAC_ST2_SFT 8 +#define NAU8825_ADC_DAC_ST2_MASK 0xf +#define NAU8825_ADC_DIG_VOL_MASK 0xff + /* MUTE_CTRL (0x31) */ #define NAU8825_DAC_ZERO_CROSSING_EN (1 << 9) #define NAU8825_DAC_SOFT_MUTE (1 << 9) /* HSVOL_CTRL (0x32) */ #define NAU8825_HP_MUTE (1 << 15) +#define NAU8825_HP_MUTE_AUTO (1 << 14) +#define NAU8825_HPL_MUTE (1 << 13) +#define NAU8825_HPR_MUTE (1 << 12) +#define NAU8825_HPL_VOL_SFT 6 +#define NAU8825_HPL_VOL_MASK (0x3f << NAU8825_HPL_VOL_SFT) +#define NAU8825_HPR_VOL_SFT 0 +#define NAU8825_HPR_VOL_MASK (0x3f << NAU8825_HPR_VOL_SFT) /* DACL_CTRL (0x33) */ #define NAU8825_DACL_CH_SEL_SFT 9 +#define NAU8825_DACL_CH_SEL_MASK (0x1 << NAU8825_DACL_CH_SEL_SFT) +#define NAU8825_DACL_CH_SEL_L (0x0 << NAU8825_DACL_CH_SEL_SFT) +#define NAU8825_DACL_CH_SEL_R (0x1 << NAU8825_DACL_CH_SEL_SFT) /* DACR_CTRL (0x34) */ #define NAU8825_DACR_CH_SEL_SFT 9 +#define NAU8825_DACR_CH_SEL_MASK (0x1 << NAU8825_DACR_CH_SEL_SFT) +#define NAU8825_DACR_CH_SEL_L (0x0 << NAU8825_DACR_CH_SEL_SFT) +#define NAU8825_DACR_CH_SEL_R (0x1 << NAU8825_DACR_CH_SEL_SFT) + +/* IMM_MODE_CTRL (0x4C) */ +#define NAU8825_IMM_THD_SFT 8 +#define NAU8825_IMM_THD_MASK (0x3f << NAU8825_IMM_THD_SFT) +#define NAU8825_IMM_CYC_SFT 4 +#define NAU8825_IMM_CYC_MASK (0x3 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_1024 (0x0 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_2048 (0x1 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_4096 (0x2 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_CYC_8192 (0x3 << NAU8825_IMM_CYC_SFT) +#define NAU8825_IMM_EN (1 << 3) +#define NAU8825_IMM_DAC_SRC_MASK 0x7 +#define NAU8825_IMM_DAC_SRC_BIQ 0x0 +#define NAU8825_IMM_DAC_SRC_DRC 0x1 +#define NAU8825_IMM_DAC_SRC_MIX 0x2 +#define NAU8825_IMM_DAC_SRC_SIN 0x3 /* CLASSG_CTRL (0x50) */ #define NAU8825_CLASSG_TIMER_SFT 8 #define NAU8825_CLASSG_TIMER_MASK (0x3f << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_1ms (0x1 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_2ms (0x2 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_8ms (0x4 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_16ms (0x8 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_32ms (0x10 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_TIMER_64ms (0x20 << NAU8825_CLASSG_TIMER_SFT) +#define NAU8825_CLASSG_LDAC_EN (0x1 << 2) +#define NAU8825_CLASSG_RDAC_EN (0x1 << 1) #define NAU8825_CLASSG_EN (1 << 0) /* I2C_DEVICE_ID (0x58) */ @@ -271,7 +325,12 @@ #define NAU8825_SOFTWARE_ID_NAU8825 0x0 /* BIAS_ADJ (0x66) */ -#define NAU8825_BIAS_TESTDAC_EN (0x3 << 8) +#define NAU8825_BIAS_HPR_IMP (1 << 15) +#define NAU8825_BIAS_HPL_IMP (1 << 14) +#define NAU8825_BIAS_TESTDAC_SFT 8 +#define NAU8825_BIAS_TESTDAC_EN (0x3 << NAU8825_BIAS_TESTDAC_SFT) +#define NAU8825_BIAS_TESTDACR_EN (0x2 << NAU8825_BIAS_TESTDAC_SFT) +#define NAU8825_BIAS_TESTDACL_EN (0x1 << NAU8825_BIAS_TESTDAC_SFT) #define NAU8825_BIAS_VMID (1 << 6) #define NAU8825_BIAS_VMID_SEL_SFT 4 #define NAU8825_BIAS_VMID_SEL_MASK (3 << NAU8825_BIAS_VMID_SEL_SFT) @@ -290,6 +349,10 @@ #define NAU8825_POWERUP_ADCL (1 << 6) /* RDAC (0x73) */ +#define NAU8825_RDAC_EN_SFT 12 +#define NAU8825_RDAC_EN (0x3 << NAU8825_RDAC_EN_SFT) +#define NAU8825_RDAC_CLK_EN_SFT 8 +#define NAU8825_RDAC_CLK_EN (0x3 << NAU8825_RDAC_CLK_EN_SFT) #define NAU8825_RDAC_CLK_DELAY_SFT 4 #define NAU8825_RDAC_CLK_DELAY_MASK (0x7 << NAU8825_RDAC_CLK_DELAY_SFT) #define NAU8825_RDAC_VREF_SFT 2 @@ -333,12 +396,21 @@ enum { NAU8825_CLK_FLL_FS, }; +/* Crosstalk detection state */ +enum { + NAU8825_XTALK_HPR_R2L = 0, + NAU8825_XTALK_HPL_R2L, + NAU8825_XTALK_IMM, + NAU8825_XTALK_DONE, +}; + struct nau8825 { struct device *dev; struct regmap *regmap; struct snd_soc_dapm_context *dapm; struct snd_soc_jack *jack; struct clk *mclk; + struct work_struct xtalk_work; int irq; int mclk_freq; /* 0 - mclk is disabled */ int button_pressed; @@ -357,6 +429,9 @@ struct nau8825 { int key_debounce; int jack_insert_debounce; int jack_eject_debounce; + int xtalk_state; + int imp_rms[NAU8825_XTALK_IMM]; + int high_imped; }; int nau8825_enable_jack_detect(struct snd_soc_codec *codec, -- 2.6.4

2 4

[alsa-devel] [PATCH] ASoC: nau8825: fix interrupt fails and unstable after resume
by John Hsu 16 Mar '16

16 Mar '16

This patch is to fix interrupt fails when resume back. In solution, we add IRQ re-initiation, and reconstruct suspend and resume with set_bias_level function. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- sound/soc/codecs/nau8825.c | 42 ++++++++++++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index 504c969..2e2e11a 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -1092,6 +1092,36 @@ static int nau8825_set_sysclk(struct snd_soc_codec *codec, int clk_id, return nau8825_configure_sysclk(nau8825, clk_id, freq); } +static int nau8825_resume_setup(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + /* IRQ Output Enable */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_OUTPUT_EN, NAU8825_IRQ_OUTPUT_EN); + + /* Enable internal VCO needed for interruptions */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); + + /* Enable DDACR needed for interrupts */ + regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR, NAU8825_ENABLE_DACR); + + /* Chip needs one FSCLK cycle in order to generate interrupts, + * as we cannot guarantee one will be provided by the system. Turning + * master mode on then off enables us to generate that FSCLK cycle + * with a minimum of contention on the clock bus. + */ + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + + nau8825_restart_jack_detection(regmap); + + return 0; +} + static int nau8825_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { @@ -1121,6 +1151,8 @@ static int nau8825_set_bias_level(struct snd_soc_codec *codec, "Failed to sync cache: %d\n", ret); return ret; } + if (nau8825->irq) + nau8825_resume_setup(nau8825); } break; @@ -1330,24 +1362,22 @@ static int nau8825_i2c_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int nau8825_suspend(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); struct nau8825 *nau8825 = dev_get_drvdata(dev); + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(nau8825->dapm); - disable_irq(client->irq); + disable_irq(nau8825->irq); + snd_soc_codec_force_bias_level(codec, SND_SOC_BIAS_OFF); regcache_cache_only(nau8825->regmap, true); - regcache_mark_dirty(nau8825->regmap); return 0; } static int nau8825_resume(struct device *dev) { - struct i2c_client *client = to_i2c_client(dev); struct nau8825 *nau8825 = dev_get_drvdata(dev); regcache_cache_only(nau8825->regmap, false); - regcache_sync(nau8825->regmap); - enable_irq(client->irq); + enable_irq(nau8825->irq); return 0; } -- 2.6.4

2 8

[alsa-devel] [PATCH] ASoC: nau8825: extend FLL function
by John Hsu 10 Mar '16

10 Mar '16

Extend FLL clock source from MCLK/BCLK/FS. Modify FLL calculation and parameter setting. Signed-off-by: John Hsu <KCHSU0(a)nuvoton.com> --- sound/soc/codecs/nau8825.c | 128 ++++++++++++++++++++++++++++++++------------- sound/soc/codecs/nau8825.h | 21 ++++++-- 2 files changed, 108 insertions(+), 41 deletions(-) diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c index c1b87c5..504c969 100644 --- a/sound/soc/codecs/nau8825.c +++ b/sound/soc/codecs/nau8825.c @@ -31,7 +31,7 @@ #include "nau8825.h" #define NAU_FREF_MAX 13500000 -#define NAU_FVCO_MAX 100000000 +#define NAU_FVCO_MAX 124000000 #define NAU_FVCO_MIN 90000000 struct nau8825_fll { @@ -874,8 +874,8 @@ static int nau8825_codec_probe(struct snd_soc_codec *codec) static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, struct nau8825_fll *fll_param) { - u64 fvco; - unsigned int fref, i; + u64 fvco, fvco_max; + unsigned int fref, i, fvco_sel; /* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing * freq_in by 1, 2, 4, or 8 using FLL pre-scalar. @@ -900,18 +900,23 @@ static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, fll_param->ratio = fll_ratio[i].val; /* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs. - * FDCO must be within the 90MHz - 100MHz or the FFL cannot be + * FDCO must be within the 90MHz - 124MHz or the FFL cannot be * guaranteed across the full range of operation. * FDCO = freq_out * 2 * mclk_src_scaling */ + fvco_max = 0; + fvco_sel = ARRAY_SIZE(mclk_src_scaling); for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { fvco = 256 * fs * 2 * mclk_src_scaling[i].param; - if (NAU_FVCO_MIN < fvco && fvco < NAU_FVCO_MAX) - break; + if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && + fvco_max < fvco) { + fvco_max = fvco; + fvco_sel = i; + } } - if (i == ARRAY_SIZE(mclk_src_scaling)) + if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel) return -EINVAL; - fll_param->mclk_src = mclk_src_scaling[i].val; + fll_param->mclk_src = mclk_src_scaling[fvco_sel].val; /* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional * input based on FDCO, FREF and FLL ratio. @@ -926,7 +931,8 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, struct nau8825_fll *fll_param) { regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, - NAU8825_CLK_MCLK_SRC_MASK, fll_param->mclk_src); + NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, + NAU8825_CLK_SRC_MCLK | fll_param->mclk_src); regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, NAU8825_FLL_RATIO_MASK, fll_param->ratio); /* FLL 16-bit fractional input */ @@ -939,10 +945,25 @@ static void nau8825_fll_apply(struct nau8825 *nau8825, NAU8825_FLL_REF_DIV_MASK, fll_param->clk_ref_div); /* select divided VCO input */ regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, - NAU8825_FLL_FILTER_SW_MASK, 0x0000); - /* FLL sigma delta modulator enable */ - regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, - NAU8825_SDM_EN_MASK, NAU8825_SDM_EN); + NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF); + /* Disable free-running mode */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); + if (fll_param->fll_frac) { + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_FILTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN, NAU8825_SDM_EN); + } else { + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU); + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_SDM_EN, 0); + } } /* freq_out must be 256*Fs in order to achieve the best performance */ @@ -970,6 +991,36 @@ static int nau8825_set_pll(struct snd_soc_codec *codec, int pll_id, int source, return 0; } +static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq) +{ + int ret = 0; + + /* We selected MCLK source but the clock itself managed externally */ + if (!nau8825->mclk) + return 0; + + if (!nau8825->mclk_freq) { + ret = clk_prepare_enable(nau8825->mclk); + if (ret) { + dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); + return ret; + } + } + + if (nau8825->mclk_freq != freq) { + nau8825->mclk_freq = freq; + + freq = clk_round_rate(nau8825->mclk, freq); + ret = clk_set_rate(nau8825->mclk, freq); + if (ret) { + dev_err(nau8825->dev, "Unable to set mclk rate\n"); + return ret; + } + } + + return 0; +} + static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, unsigned int freq) { @@ -981,29 +1032,9 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK); regmap_update_bits(regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); - - /* We selected MCLK source but the clock itself managed externally */ - if (!nau8825->mclk) - break; - - if (!nau8825->mclk_freq) { - ret = clk_prepare_enable(nau8825->mclk); - if (ret) { - dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); - return ret; - } - } - - if (nau8825->mclk_freq != freq) { - nau8825->mclk_freq = freq; - - freq = clk_round_rate(nau8825->mclk, freq); - ret = clk_set_rate(nau8825->mclk, freq); - if (ret) { - dev_err(nau8825->dev, "Unable to set mclk rate\n"); - return ret; - } - } + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; break; case NAU8825_CLK_INTERNAL: @@ -1011,7 +1042,32 @@ static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, NAU8825_DCO_EN); regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; + case NAU8825_CLK_FLL_MCLK: + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_MCLK); + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; + + break; + case NAU8825_CLK_FLL_BLK: + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_BLK); + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + break; + case NAU8825_CLK_FLL_FS: + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK, NAU8825_FLL_CLK_SRC_FS); if (nau8825->mclk_freq) { clk_disable_unprepare(nau8825->mclk); nau8825->mclk_freq = 0; diff --git a/sound/soc/codecs/nau8825.h b/sound/soc/codecs/nau8825.h index dff8edb..8237693 100644 --- a/sound/soc/codecs/nau8825.h +++ b/sound/soc/codecs/nau8825.h @@ -112,20 +112,28 @@ /* FLL3 (0x06) */ #define NAU8825_FLL_INTEGER_MASK (0x3ff << 0) +#define NAU8825_FLL_CLK_SRC_SFT 10 +#define NAU8825_FLL_CLK_SRC_MASK (0x3 << NAU8825_FLL_CLK_SRC_SFT) +#define NAU8825_FLL_CLK_SRC_MCLK (0 << NAU8825_FLL_CLK_SRC_SFT) +#define NAU8825_FLL_CLK_SRC_BLK (0x2 << NAU8825_FLL_CLK_SRC_SFT) +#define NAU8825_FLL_CLK_SRC_FS (0x3 << NAU8825_FLL_CLK_SRC_SFT) /* FLL4 (0x07) */ #define NAU8825_FLL_REF_DIV_MASK (0x3 << 10) /* FLL5 (0x08) */ -#define NAU8825_FLL_FILTER_SW_MASK (0x1 << 14) +#define NAU8825_FLL_PDB_DAC_EN (0x1 << 15) +#define NAU8825_FLL_LOOP_FTR_EN (0x1 << 14) +#define NAU8825_FLL_CLK_SW_MASK (0x1 << 13) +#define NAU8825_FLL_CLK_SW_N2 (0x1 << 13) +#define NAU8825_FLL_CLK_SW_REF (0x0 << 13) +#define NAU8825_FLL_FTR_SW_MASK (0x1 << 12) +#define NAU8825_FLL_FTR_SW_ACCU (0x1 << 12) +#define NAU8825_FLL_FTR_SW_FILTER (0x0 << 12) /* FLL6 (0x9) */ -#define NAU8825_DCO_EN_MASK (0x1 << 15) #define NAU8825_DCO_EN (0x1 << 15) -#define NAU8825_DCO_DIS (0x0 << 15) -#define NAU8825_SDM_EN_MASK (0x1 << 14) #define NAU8825_SDM_EN (0x1 << 14) -#define NAU8825_SDM_DIS (0x0 << 14) /* HSD_CTRL (0xc) */ #define NAU8825_HSD_AUTO_MODE (1 << 6) @@ -306,6 +314,9 @@ enum { NAU8825_CLK_MCLK = 0, NAU8825_CLK_INTERNAL, + NAU8825_CLK_FLL_MCLK, + NAU8825_CLK_FLL_BLK, + NAU8825_CLK_FLL_FS, }; struct nau8825 { -- 2.6.4

2 5

[alsa-devel] [PATCH RFC v5 0/8] Implement generic ASoC HDMI codec and use it in tda998x
by Jyri Sarha 08 Mar '16

08 Mar '16

There is very little change to this series since the RFC v4, but because of the recent interest on the hdmi-codec patch I decided to send another version of the series. Changes since RFC v4, - Rebased on top of the latest drm-next branch - Split the hdmi-codec abort functionality into a separate patch for better visibility of what it is all about - This does not affect the tda998x patches as the abort functionality is not used - Drop S18_3* formats from I2S_FORMATS and add a comment about formats not supported by HDMI There was also some comments about the DT ports binding for tda998x by Jean-Francois Moine. However I did not have time to come up with alternative approach. All in all my tda998x patches should be considered more as a proof of concept for the hdmi-codec part, rather than a serious attempt to get those patches in. However, all comments to those patch are more than welcome as they will help me to come up with something that could finally get merged. Changes since RFC v3, ASoC side: - Add "ALSA: pcm: add IEC958 channel status helper for hw_params" - Add "tda998x: Improve tda998x_configure_audio() audio related pdata" - use snd_pcm_create_iec958_consumer_hw_params() to construct the stream header - Remove set_clk() callback from hdmi-codec. It is not needed for now. - Refer to stream header in AIF as specified in HDMI standard - Set current_stream to NULL only after video side audio_shutdown() has been called. Avoid potential race if video side attempts to abort audio at the same time. - No need to have video side device pointer in the hdmi codec's pdata as it is found from dev->parent. - Fix hdmi-codec enum: DAI_ID_I2C > DAI_ID_I2S - Improve audio_startup API comment - Make improved checkpatch happy - BUG_ON > WARN_ON - put */ ending the block comment to a separate line DRM side: - Fix tda998x get_eld() locking - Change tda998x audio parameters in pdata to more generic, that can be readily used in tda998x_audio_config() - Rename and restructure audio port related private data members to be more descriptive - Require audio configuration trough ASoC hdmi-codec if HDMI audio is configured trough DT binding. DTS: - Increase McASP fifo usage form 1 to 32 The binding for tda998x is taken from Jean Francois' patch series[1] on the same subject. The implementation of the of-node parsing has some minor changes from my self. Here is what I think at least could or should still be done, but non of that stuff does not sounds critical right now. Missing from tda998x driver side - hdmi_codec_ops audio_startup() implementation for audio abort support - multi channel audio support (I would need specs and preferably some HW to test for this). Missing from ASoC side generic implementation: - channel_allocation handling is completely left for the video side driver, see if ASoC side could help in any way - snd_soc_jack functionality to handle hdmi cable plug/unplug events [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095596.html Best regards, Jyri Jean-Francois Moine (1): drm/i2c: tda998x: Add support of a DT graph of ports Jyri Sarha (7): ALSA: pcm: add IEC958 channel status helper for hw_params ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders ASoC: hdmi-codec: Add audio abort() callback for video side to use drm/i2c: tda998x: Remove include/sound/tda998x.h and fix graph parsing drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata drm/i2c: tda998x: Register ASoC HDMI codec for audio functionality ARM: dts: am335x-boneblack: Add HDMI audio support .../devicetree/bindings/display/bridge/tda998x.txt | 51 +++ arch/arm/boot/dts/am335x-boneblack.dts | 90 ++++- drivers/gpu/drm/i2c/Kconfig | 1 + drivers/gpu/drm/i2c/tda998x_drv.c | 300 ++++++++++++--- include/drm/i2c/tda998x.h | 24 +- include/sound/hdmi-codec.h | 104 ++++++ include/sound/pcm_iec958.h | 2 + sound/core/pcm_iec958.c | 52 ++- sound/soc/codecs/Kconfig | 6 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/hdmi-codec.c | 411 +++++++++++++++++++++ 11 files changed, 964 insertions(+), 79 deletions(-) create mode 100644 include/sound/hdmi-codec.h create mode 100644 sound/soc/codecs/hdmi-codec.c -- 1.9.1

7 27

[alsa-devel] [PATCH 0/9] ASoC: wm*: Fix enum ctl accesses
by Takashi Iwai 08 Mar '16

08 Mar '16

Hi, here is a patchset for correcting the wrong access types to the enum ctl values in various wm* codec drivers. I didn't put Cc to stable. If they might be used for 64 bit architectures, it's a real problem. In that case, feel free to put Cc to stable. thanks, Takashi === Takashi Iwai (9): ASoC: wm8753: Fix enum ctl accesses in a wrong type ASoC: wm8904: Fix enum ctl accesses in a wrong type ASoC: wm8958: Fix enum ctl accesses in a wrong type ASoC: wm8983: Fix enum ctl accesses in a wrong type ASoC: wm8985: Fix enum ctl accesses in a wrong type ASoC: wm8994: Fix enum ctl accesses in a wrong type ASoC: wm8996: Fix enum ctl accesses in a wrong type ASoC: wm9081: Fix enum ctl accesses in a wrong type ASoC: wm_adsp: Fix enum ctl accesses in a wrong type sound/soc/codecs/wm8753.c | 6 +++--- sound/soc/codecs/wm8904.c | 4 ++-- sound/soc/codecs/wm8958-dsp2.c | 8 ++++---- sound/soc/codecs/wm8983.c | 14 +++++++------- sound/soc/codecs/wm8985.c | 14 +++++++------- sound/soc/codecs/wm8994.c | 4 ++-- sound/soc/codecs/wm8996.c | 2 +- sound/soc/codecs/wm9081.c | 8 ++++---- sound/soc/codecs/wm_adsp.c | 8 ++++---- 9 files changed, 34 insertions(+), 34 deletions(-) -- 2.7.2

3 19