August 2015 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] ASoC: rt5640: fix line out no sound issue
by John Lin 11 Aug '15

11 Aug '15

The power for line out was not turned on when line out is enabled. So we add "LOUT amp" widget to turn on the power for line out. Signed-off-by: John Lin <john.lin(a)realtek.com> --- sound/soc/codecs/rt5640.c | 40 +++++++++++++++++++++++++++++++++++++--- 1 file changed, 37 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 7d488d8..3c5b496 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -985,6 +985,35 @@ static int rt5640_hp_event(struct snd_soc_dapm_widget *w, return 0; } +static int rt5640_lout_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + hp_amp_power_on(codec); + snd_soc_update_bits(codec, RT5640_PWR_ANLG1, + RT5640_PWR_LM, RT5640_PWR_LM); + snd_soc_update_bits(codec, RT5640_OUTPUT, + RT5640_L_MUTE | RT5640_R_MUTE, 0); + break; + + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, RT5640_OUTPUT, + RT5640_L_MUTE | RT5640_R_MUTE, + RT5640_L_MUTE | RT5640_R_MUTE); + snd_soc_update_bits(codec, RT5640_PWR_ANLG1, + RT5640_PWR_LM, 0); + break; + + default: + return 0; + } + + return 0; +} + static int rt5640_hp_power_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1180,13 +1209,16 @@ static const struct snd_soc_dapm_widget rt5640_dapm_widgets[] = { 0, rt5640_spo_l_mix, ARRAY_SIZE(rt5640_spo_l_mix)), SND_SOC_DAPM_MIXER("SPOR MIX", SND_SOC_NOPM, 0, 0, rt5640_spo_r_mix, ARRAY_SIZE(rt5640_spo_r_mix)), - SND_SOC_DAPM_MIXER("LOUT MIX", RT5640_PWR_ANLG1, RT5640_PWR_LM_BIT, 0, + SND_SOC_DAPM_MIXER("LOUT MIX", SND_SOC_NOPM, 0, 0, rt5640_lout_mix, ARRAY_SIZE(rt5640_lout_mix)), SND_SOC_DAPM_SUPPLY_S("Improve HP Amp Drv", 1, SND_SOC_NOPM, 0, 0, rt5640_hp_power_event, SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, rt5640_hp_event, SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_S("LOUT amp", 1, SND_SOC_NOPM, 0, 0, + rt5640_lout_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), SND_SOC_DAPM_SUPPLY("HP L Amp", RT5640_PWR_ANLG1, RT5640_PWR_HP_L_BIT, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("HP R Amp", RT5640_PWR_ANLG1, @@ -1501,8 +1533,10 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"HP R Playback", "Switch", "HP Amp"}, {"HPOL", NULL, "HP L Playback"}, {"HPOR", NULL, "HP R Playback"}, - {"LOUTL", NULL, "LOUT MIX"}, - {"LOUTR", NULL, "LOUT MIX"}, + + {"LOUT amp", NULL, "LOUT MIX"}, + {"LOUTL", NULL, "LOUT amp"}, + {"LOUTR", NULL, "LOUT amp"}, }; static const struct snd_soc_dapm_route rt5640_specific_dapm_routes[] = { -- 1.8.1.1.439.g50a6b54

2 1

[alsa-devel] [PATCH v5] ASoC: wm8960: update pll and clock setting function
by Zidan Wang 11 Aug '15

11 Aug '15

Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang(a)freescale.com> --- sound/soc/codecs/wm8960.c | 220 +++++++++++++++++++++++++++++++++++++--------- sound/soc/codecs/wm8960.h | 1 + 2 files changed, 180 insertions(+), 41 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 1ed0720..e3b7d0c 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -48,6 +48,9 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30 +static bool is_pll_freq_available(unsigned int source, unsigned int target); +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out); /* * wm8960 register cache * We can't read the WM8960 register space when we are @@ -126,9 +129,12 @@ struct wm8960_priv { struct snd_soc_dapm_widget *rout1; struct snd_soc_dapm_widget *out3; bool deemph; - int playback_fs; + int lrclk; int bclk; int sysclk; + int clk_id; + int freq_in; + bool is_stream_in_use[2]; struct wm8960_data pdata; }; @@ -164,8 +170,8 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec) if (wm8960->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - wm8960->playback_fs) < - abs(deemph_settings[best] - wm8960->playback_fs)) + if (abs(deemph_settings[i] - wm8960->lrclk) < + abs(deemph_settings[best] - wm8960->lrclk)) best = i; } @@ -565,6 +571,9 @@ static struct { { 8000, 5 }, }; +/* -1 for reserved value */ +static const int sysclk_divs[] = { 1, -1, 2, -1 }; + /* Multiply 256 for internal 256 div */ static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 }; @@ -574,61 +583,110 @@ static const int bclk_divs[] = { 120, 160, 220, 240, 320, 320, 320 }; -static void wm8960_configure_clocking(struct snd_soc_codec *codec, - bool tx, int lrclk) +static int wm8960_configure_clocking(struct snd_soc_codec *codec) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int sysclk, bclk, lrclk, freq_out, freq_in; u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); - u16 iface2 = snd_soc_read(codec, WM8960_IFACE2); - u32 sysclk; - int i, j; + int i, j, k; if (!(iface1 & (1<<6))) { dev_dbg(codec->dev, "Codec is slave mode, no need to configure clock\n"); - return; + return 0; + } + + if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) { + dev_err(codec->dev, "No MCLK configured\n"); + return -EINVAL; } - if (!wm8960->sysclk) { - dev_dbg(codec->dev, "No SYSCLK configured\n"); - return; + freq_in = wm8960->freq_in; + bclk = wm8960->bclk; + lrclk = wm8960->lrclk; + /* + * If it's sysclk auto mode, check if the MCLK can provide sysclk or + * not. If MCLK can provide sysclk, using MCLK to provide sysclk + * directly. Otherwise, auto select a available pll out frequency + * and set PLL. + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) { + /* disable the PLL and using MCLK to provide sysclk */ + wm8960_set_pll(codec, 0, 0); + freq_out = freq_in; + } else if (wm8960->sysclk) { + freq_out = wm8960->sysclk; + } else { + dev_err(codec->dev, "No SYSCLK configured\n"); + return -EINVAL; } - if (!wm8960->bclk || !lrclk) { - dev_dbg(codec->dev, "No audio clocks configured\n"); - return; + /* check if the sysclk frequency is available. */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + sysclk = freq_out / sysclk_divs[i]; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + if (sysclk == dac_divs[j] * lrclk) { + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) + if (sysclk == bclk * bclk_divs[k] / 10) + break; + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + } + if (j != ARRAY_SIZE(dac_divs)) + break; } - for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) { - if (wm8960->sysclk == lrclk * dac_divs[i]) { - for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) { - sysclk = wm8960->bclk * bclk_divs[j] / 10; - if (wm8960->sysclk == sysclk) + if (i != ARRAY_SIZE(sysclk_divs)) { + goto configure_clock; + } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + /* get a available pll out frequency and set pll */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + sysclk = lrclk * dac_divs[j]; + freq_out = sysclk * sysclk_divs[i]; + + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) { + if (sysclk == bclk * bclk_divs[k] / 10 && + is_pll_freq_available(freq_in, freq_out)) { + wm8960_set_pll(codec, + freq_in, freq_out); break; + } else { + continue; + } } - if(j != ARRAY_SIZE(bclk_divs)) + if (k != ARRAY_SIZE(bclk_divs)) break; } + if (j != ARRAY_SIZE(dac_divs)) + break; } - if (i == ARRAY_SIZE(dac_divs)) { - dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk); - return; + if (i == ARRAY_SIZE(sysclk_divs)) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; } - /* - * configure frame clock. If ADCLRC configure as GPIO pin, DACLRC - * pin is used as a frame clock for ADCs and DACs. - */ - if (iface2 & (1<<6)) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (!tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, i << 6); +configure_clock: + /* configure sysclk clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1); + + /* configure frame clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6); /* configure bit clock */ - snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, j); + snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k); + + return 0; } static int wm8960_hw_params(struct snd_pcm_substream *substream, @@ -667,9 +725,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + wm8960->lrclk = params_rate(params); /* Update filters for the new rate */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - wm8960->playback_fs = params_rate(params); + if (tx) { wm8960_set_deemph(codec); } else { for (i = 0; i < ARRAY_SIZE(alc_rates); i++) @@ -682,7 +740,23 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface); - wm8960_configure_clocking(codec, tx, params_rate(params)); + wm8960->is_stream_in_use[tx] = true; + + if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_ON && + !wm8960->is_stream_in_use[!tx]) + return wm8960_configure_clocking(codec); + + return 0; +} + +static int wm8960_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + + wm8960->is_stream_in_use[tx] = false; return 0; } @@ -702,6 +776,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int ret; switch (level) { @@ -721,11 +796,22 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, } } + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + /* Set VMID to 2x50k */ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); break; @@ -780,6 +866,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int reg, ret; switch (level) { @@ -831,9 +918,21 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, return ret; } } + + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); @@ -892,6 +991,28 @@ struct _pll_div { u32 k:24; }; +static bool is_pll_freq_available(unsigned int source, unsigned int target) +{ + unsigned int Ndiv; + + if (source == 0 || target == 0) + return false; + + /* Scale up target to PLL operating frequency */ + target *= 4; + Ndiv = target / source; + + if (Ndiv < 6) { + source >>= 1; + Ndiv = target / source; + } + + if ((Ndiv < 6) || (Ndiv > 12)) + return false; + + return true; +} + /* The size in bits of the pll divide multiplied by 10 * to allow rounding later */ #define FIXED_PLL_SIZE ((1 << 24) * 10) @@ -943,10 +1064,9 @@ static int pll_factors(unsigned int source, unsigned int target, return 0; } -static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out) { - struct snd_soc_codec *codec = codec_dai->codec; u16 reg; static struct _pll_div pll_div; int ret; @@ -986,6 +1106,20 @@ static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, return 0; } +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->freq_in = freq_in; + + if (pll_id == WM8960_SYSCLK_AUTO) + return 0; + + return wm8960_set_pll(codec, freq_in, freq_out); +} + static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -1043,11 +1177,14 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, WM8960_SYSCLK_PLL); break; + case WM8960_SYSCLK_AUTO: + break; default: return -EINVAL; } wm8960->sysclk = freq; + wm8960->clk_id = clk_id; return 0; } @@ -1060,6 +1197,7 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, static const struct snd_soc_dai_ops wm8960_dai_ops = { .hw_params = wm8960_hw_params, + .hw_free = wm8960_hw_free, .digital_mute = wm8960_mute, .set_fmt = wm8960_set_dai_fmt, .set_clkdiv = wm8960_set_dai_clkdiv, diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h index 2d8163d..ab3220d 100644 --- a/sound/soc/codecs/wm8960.h +++ b/sound/soc/codecs/wm8960.h @@ -82,6 +82,7 @@ #define WM8960_SYSCLK_MCLK (0 << 0) #define WM8960_SYSCLK_PLL (1 << 0) +#define WM8960_SYSCLK_AUTO (2 << 0) #define WM8960_DAC_DIV_1 (0 << 3) #define WM8960_DAC_DIV_1_5 (1 << 3) -- 1.9.1

3 2

[alsa-devel] [PATCH] ASoC: rsnd: Silence DMA slave ID compile warning on 64-bit
by Geert Uytterhoeven 11 Aug '15

11 Aug '15

On arm64: sound/soc/sh/rcar/dma.c: In function 'rsnd_dmaen_init': sound/soc/sh/rcar/dma.c:180:9: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (void *)id); ^ include/linux/dmaengine.h:1185:75: note: in definition of macro 'dma_request_channel' #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) ^ Add an intermediate cast to "uintptr_t" to kill the compile warning. Signed-off-by: Geert Uytterhoeven <geert+renesas(a)glider.be> --- sound/soc/sh/rcar/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/sh/rcar/dma.c b/sound/soc/sh/rcar/dma.c index 305b129298538850..bfbb8a5e93bdce6c 100644 --- a/sound/soc/sh/rcar/dma.c +++ b/sound/soc/sh/rcar/dma.c @@ -177,7 +177,7 @@ static int rsnd_dmaen_init(struct rsnd_dai_stream *io, dma_cap_set(DMA_SLAVE, mask); dmaen->chan = dma_request_channel(mask, shdma_chan_filter, - (void *)id); + (void *)(uintptr_t)id); } if (IS_ERR_OR_NULL(dmaen->chan)) { dmaen->chan = NULL; -- 1.9.1

2 1

[alsa-devel] [PATCH v2 0/3] topology: Add external API for building topology data
by Liam Girdwood 11 Aug '15

11 Aug '15

Currently we can build topology binary data files from topology text files. However it is sometimes necessary for DSP FW vendors to build topology binary data within a toolset and create topology binary data directly from within vendor tools. This series adds an API to the alsa-lib topology core so that vendor tools can create topology data directly. Changes since V1:- o Split out refactoring of OBJECT_TYPE to SND_TPLG_TYPE_ o Removed inclusing of type_compat.h from asoc.h Liam Girdwood (1): topology: rename OBJECT_TYPE_ to SND_TPLG_TYPE_ Mengdong Lin (2): topology: Add C templates structure for building topology from C programs topology: A API calls to directly build topology data from templates include/topology.h | 202 ++++++++++++++++++++++++++++ src/topology/builder.c | 38 +++--- src/topology/ctl.c | 329 +++++++++++++++++++++++++++++++++++++++++++--- src/topology/dapm.c | 223 ++++++++++++++++++++++++++----- src/topology/data.c | 10 +- src/topology/elem.c | 43 ++++-- src/topology/parser.c | 63 ++++++++- src/topology/pcm.c | 34 ++--- src/topology/text.c | 2 +- src/topology/tplg_local.h | 33 ++--- 10 files changed, 847 insertions(+), 130 deletions(-) -- 2.1.4

3 9

[alsa-devel] [RESEND PATCH] mfd: wm8994: Fix NULL pointer exception on missing pdata
by Inha Song 11 Aug '15

11 Aug '15

If we use the dev_get_platdata, pdata can be NULL in DT environments. Actually, NULL pointer exception is occurs with error messages like this: [ 1.226583] Unable to handle kernel NULL pointer dereference at virtual address 00000044 [ 1.467910] [<c02f1e38>] (wm8994_irq_init) from [<c02f1bd4>] (wm8994_i2c_probe+0x684/0x858) [ 1.476241] [<c02f1bd4>] (wm8994_i2c_probe) from [<c0371c78>] (i2c_device_probe+0x11c/0x17c) In wm8994-core, we already checked whether platform data is NULL and set the wm8994->pdata to platform data if platform data is not NULL. So, we can use wm8994->pdata instead of platform data. Signed-off-by: Inha Song <ideal.song(a)samsung.com> Acked-by: Charles Keepax <ckeepax(a)opensource.wolfsonmicro.com> --- drivers/mfd/wm8994-irq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c index 55c380a..55c59d9 100644 --- a/drivers/mfd/wm8994-irq.c +++ b/drivers/mfd/wm8994-irq.c @@ -193,7 +193,7 @@ int wm8994_irq_init(struct wm8994 *wm8994) { int ret; unsigned long irqflags; - struct wm8994_pdata *pdata = dev_get_platdata(wm8994->dev); + struct wm8994_pdata *pdata = &wm8994->pdata; if (!wm8994->irq) { dev_warn(wm8994->dev, -- 2.0.0.390.gcb682f8

2 1

[alsa-devel] [PATCH] topology: fix output file unlinking
by Liam Girdwood 11 Aug '15

11 Aug '15

Unlinking is unecessary as the old file will be overwritten with the new as intended. Signed-off-by: Liam Girdwood <liam.r.girdwood(a)linux.intel.com> --- src/topology/parser.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/src/topology/parser.c b/src/topology/parser.c index ed25bb8..5544517 100644 --- a/src/topology/parser.c +++ b/src/topology/parser.c @@ -266,9 +266,6 @@ int snd_tplg_build_file(snd_tplg_t *tplg, const char *infile, snd_config_t *cfg = NULL; int err = 0; - /* delete any old output files */ - unlink(outfile); - tplg->out_fd = open(outfile, O_RDWR | O_CREAT, S_IRWXU | S_IRWXG | S_IRWXO); if (tplg->out_fd < 0) { -- 2.1.4

2 2

[alsa-devel] [PATCH 0/2] ALSA: fireworks/firewire-lib: add support for recent firmware quirk
by Takashi Sakamoto 11 Aug '15

11 Aug '15

Some users have reported current ALSA Fireworks driver stops packet streaming due to detecting discontinuity. [alsa-devel] ALSA snd-fireworks Echo AudioFire 2 http://mailman.alsa-project.org/pipermail/alsa-devel/2014-August/080379.html [alsa-devel] AudioFire4 quirk http://mailman.alsa-project.org/pipermail/alsa-devel/2015-July/095697.html Linux 3.16 or later have this issue. As long as I investigate, this issue depends on firmware version installed in these devices. While, it's not clear that which version of firmwares for which model has this quirk. At least, firmware version 5.7.0, 5.7.3 and 5.8.0 for AudioFire2/AudioFire4/AudioFirePre8 have this quirk. This patchset applies a solution for this issue, with my assumption that 'the same firmware binary has the same quirk'. These models, AudioFire8 (since Jul 2009) and Gibson Robot Interface Pack (RIP) series uses the same firmware binary in driver package. If possible, the second patch should be applied to all of stable kernels. This patchset updates my previous RFC: [alsa-devel] [RFC][PATCH 0/2] ALSA: fireworks/firewire-lib: add support for recent firmware quirk http://mailman.alsa-project.org/pipermail/alsa-devel/2015-August/095849.html Takashi Sakamoto (2): Revert "ALSA: fireworks: add support for AudioFire2 quirk" ALSA: fireworks/firewire-lib: add support for recent firmware quirk sound/firewire/amdtp.c | 5 +++-- sound/firewire/amdtp.h | 2 ++ sound/firewire/fireworks/fireworks.c | 10 ++++++++-- sound/firewire/fireworks/fireworks.h | 2 +- sound/firewire/fireworks/fireworks_stream.c | 12 +++++++++--- 5 files changed, 23 insertions(+), 8 deletions(-) -- 2.1.4

2 7

[alsa-devel] [PATCH v4] ASoC: wm8960: update pll and clock setting function
by Zidan Wang 11 Aug '15

11 Aug '15

Add sysclk auto mode. When it's sysclk auto mode, if the MCLK is available for clock configure, using MCLK to provide sysclk directly, otherwise, search a available pll out frequcncy and set pll. Configure clock in hw_params may cause problems when using bypass style paths without hw_params in machine driver getting called. So add configure clock to set_bias_level. Signed-off-by: Zidan Wang <zidan.wang(a)freescale.com> --- sound/soc/codecs/wm8960.c | 220 +++++++++++++++++++++++++++++++++++++--------- sound/soc/codecs/wm8960.h | 1 + 2 files changed, 180 insertions(+), 41 deletions(-) diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c index 1ed0720..e7ee49a 100644 --- a/sound/soc/codecs/wm8960.c +++ b/sound/soc/codecs/wm8960.c @@ -48,6 +48,9 @@ #define WM8960_DISOP 0x40 #define WM8960_DRES_MASK 0x30 +static bool is_pll_freq_available(unsigned int source, unsigned int target); +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out); /* * wm8960 register cache * We can't read the WM8960 register space when we are @@ -126,9 +129,12 @@ struct wm8960_priv { struct snd_soc_dapm_widget *rout1; struct snd_soc_dapm_widget *out3; bool deemph; - int playback_fs; + int lrclk; int bclk; int sysclk; + int clk_id; + int freq_in; + bool is_stream_in_use[2]; struct wm8960_data pdata; }; @@ -164,8 +170,8 @@ static int wm8960_set_deemph(struct snd_soc_codec *codec) if (wm8960->deemph) { best = 1; for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) { - if (abs(deemph_settings[i] - wm8960->playback_fs) < - abs(deemph_settings[best] - wm8960->playback_fs)) + if (abs(deemph_settings[i] - wm8960->lrclk) < + abs(deemph_settings[best] - wm8960->lrclk)) best = i; } @@ -565,6 +571,9 @@ static struct { { 8000, 5 }, }; +/* -1 for reserved value */ +static const int sysclk_divs[] = { 1, -1, 2, -1 }; + /* Multiply 256 for internal 256 div */ static const int dac_divs[] = { 256, 384, 512, 768, 1024, 1408, 1536 }; @@ -574,61 +583,110 @@ static const int bclk_divs[] = { 120, 160, 220, 240, 320, 320, 320 }; -static void wm8960_configure_clocking(struct snd_soc_codec *codec, - bool tx, int lrclk) +static int wm8960_configure_clocking(struct snd_soc_codec *codec) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + int sysclk, bclk, lrclk, freq_out, freq_in; u16 iface1 = snd_soc_read(codec, WM8960_IFACE1); - u16 iface2 = snd_soc_read(codec, WM8960_IFACE2); - u32 sysclk; - int i, j; + int i, j, k; if (!(iface1 & (1<<6))) { dev_dbg(codec->dev, "Codec is slave mode, no need to configure clock\n"); - return; + return 0; + } + + if (wm8960->clk_id != WM8960_SYSCLK_MCLK && !wm8960->freq_in) { + dev_err(codec->dev, "No MCLK configured\n"); + return -EINVAL; } - if (!wm8960->sysclk) { - dev_dbg(codec->dev, "No SYSCLK configured\n"); - return; + freq_in = wm8960->freq_in; + bclk = wm8960->bclk; + lrclk = wm8960->lrclk; + /* + * If it's sysclk auto mode, check if the MCLK can provide sysclk or + * not. If MCLK can provide sysclk, using MCLK to provide sysclk + * directly. Otherwise, auto select a available pll out frequency + * and set PLL. + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO) { + /* disable the PLL and using MCLK to provide sysclk */ + wm8960_set_pll(codec, 0, 0); + freq_out = freq_in; + } else if (wm8960->sysclk) { + freq_out = wm8960->sysclk; + } else { + dev_err(codec->dev, "No SYSCLK configured\n"); + return -EINVAL; } - if (!wm8960->bclk || !lrclk) { - dev_dbg(codec->dev, "No audio clocks configured\n"); - return; + /* check if the sysclk frequency is available. */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + sysclk = freq_out / sysclk_divs[i]; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + if (sysclk == dac_divs[j] * lrclk) { + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) + if (sysclk == bclk * bclk_divs[k] / 10) + break; + if (k != ARRAY_SIZE(bclk_divs)) + break; + } + } + if (j != ARRAY_SIZE(dac_divs)) + break; } - for (i = 0; i < ARRAY_SIZE(dac_divs); ++i) { - if (wm8960->sysclk == lrclk * dac_divs[i]) { - for (j = 0; j < ARRAY_SIZE(bclk_divs); ++j) { - sysclk = wm8960->bclk * bclk_divs[j] / 10; - if (wm8960->sysclk == sysclk) + if (i != ARRAY_SIZE(sysclk_divs)) { + goto configure_clock; + } else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; + } + /* get a available pll out frequency and set pll */ + for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) { + if (sysclk_divs[i] == -1) + continue; + for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) { + sysclk = lrclk * dac_divs[j]; + freq_out = sysclk * sysclk_divs[i]; + + for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) { + if (sysclk == bclk * bclk_divs[k] / 10 && + is_pll_freq_available(freq_in, freq_out)) { + wm8960_set_pll(codec, + freq_in, freq_out); break; + } else { + continue; + } } - if(j != ARRAY_SIZE(bclk_divs)) + if (k != ARRAY_SIZE(bclk_divs)) break; } + if (j != ARRAY_SIZE(dac_divs)) + break; } - if (i == ARRAY_SIZE(dac_divs)) { - dev_err(codec->dev, "Unsupported sysclk %d\n", wm8960->sysclk); - return; + if (i == ARRAY_SIZE(sysclk_divs)) { + dev_err(codec->dev, "failed to configure clock\n"); + return -EINVAL; } - /* - * configure frame clock. If ADCLRC configure as GPIO pin, DACLRC - * pin is used as a frame clock for ADCs and DACs. - */ - if (iface2 & (1<<6)) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, i << 3); - else if (!tx) - snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, i << 6); +configure_clock: + /* configure sysclk clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 3 << 1, i << 1); + + /* configure frame clock */ + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 3, j << 3); + snd_soc_update_bits(codec, WM8960_CLOCK1, 0x7 << 6, j << 6); /* configure bit clock */ - snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, j); + snd_soc_update_bits(codec, WM8960_CLOCK2, 0xf, k); + + return 0; } static int wm8960_hw_params(struct snd_pcm_substream *substream, @@ -667,9 +725,9 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, return -EINVAL; } + wm8960->lrclk = params_rate(params); /* Update filters for the new rate */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - wm8960->playback_fs = params_rate(params); + if (tx) { wm8960_set_deemph(codec); } else { for (i = 0; i < ARRAY_SIZE(alc_rates); i++) @@ -682,7 +740,23 @@ static int wm8960_hw_params(struct snd_pcm_substream *substream, /* set iface */ snd_soc_write(codec, WM8960_IFACE1, iface); - wm8960_configure_clocking(codec, tx, params_rate(params)); + wm8960->is_stream_in_use[tx] = true; + + if (codec->dapm.bias_level == SND_SOC_BIAS_ON && + !wm8960->is_stream_in_use[!tx]) + return wm8960_configure_clocking(codec); + + return 0; +} + +static int wm8960_hw_free(struct snd_pcm_substream *substream, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; + + wm8960->is_stream_in_use[tx] = false; return 0; } @@ -702,6 +776,7 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int ret; switch (level) { @@ -721,11 +796,22 @@ static int wm8960_set_bias_level_out3(struct snd_soc_codec *codec, } } + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + /* Set VMID to 2x50k */ snd_soc_update_bits(codec, WM8960_POWER1, 0x180, 0x80); break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); break; @@ -780,6 +866,7 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + u16 pm2 = snd_soc_read(codec, WM8960_POWER2); int reg, ret; switch (level) { @@ -831,9 +918,21 @@ static int wm8960_set_bias_level_capless(struct snd_soc_codec *codec, return ret; } } + + ret = wm8960_configure_clocking(codec); + if (ret) + return ret; + break; case SND_SOC_BIAS_ON: + /* + * If it's sysclk auto mode, and the pll is enabled, + * disable the pll + */ + if (wm8960->clk_id == WM8960_SYSCLK_AUTO && (pm2 & 0x1)) + wm8960_set_pll(codec, 0, 0); + if (!IS_ERR(wm8960->mclk)) clk_disable_unprepare(wm8960->mclk); @@ -892,6 +991,28 @@ struct _pll_div { u32 k:24; }; +static bool is_pll_freq_available(unsigned int source, unsigned int target) +{ + unsigned int Ndiv; + + if (source == 0 || target == 0) + return false; + + /* Scale up target to PLL operating frequency */ + target *= 4; + Ndiv = target / source; + + if (Ndiv < 6) { + source >>= 1; + Ndiv = target / source; + } + + if ((Ndiv < 6) || (Ndiv > 12)) + return false; + + return true; +} + /* The size in bits of the pll divide multiplied by 10 * to allow rounding later */ #define FIXED_PLL_SIZE ((1 << 24) * 10) @@ -943,10 +1064,9 @@ static int pll_factors(unsigned int source, unsigned int target, return 0; } -static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, - int source, unsigned int freq_in, unsigned int freq_out) +static int wm8960_set_pll(struct snd_soc_codec *codec, + unsigned int freq_in, unsigned int freq_out) { - struct snd_soc_codec *codec = codec_dai->codec; u16 reg; static struct _pll_div pll_div; int ret; @@ -986,6 +1106,20 @@ static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, return 0; } +static int wm8960_set_dai_pll(struct snd_soc_dai *codec_dai, int pll_id, + int source, unsigned int freq_in, unsigned int freq_out) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec); + + wm8960->freq_in = freq_in; + + if (pll_id == WM8960_SYSCLK_AUTO) + return 0; + + return wm8960_set_pll(codec, freq_in, freq_out); +} + static int wm8960_set_dai_clkdiv(struct snd_soc_dai *codec_dai, int div_id, int div) { @@ -1043,11 +1177,14 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, snd_soc_update_bits(codec, WM8960_CLOCK1, 0x1, WM8960_SYSCLK_PLL); break; + case WM8960_SYSCLK_AUTO: + break; default: return -EINVAL; } wm8960->sysclk = freq; + wm8960->clk_id = clk_id; return 0; } @@ -1060,6 +1197,7 @@ static int wm8960_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id, static const struct snd_soc_dai_ops wm8960_dai_ops = { .hw_params = wm8960_hw_params, + .hw_free = wm8960_hw_free, .digital_mute = wm8960_mute, .set_fmt = wm8960_set_dai_fmt, .set_clkdiv = wm8960_set_dai_clkdiv, diff --git a/sound/soc/codecs/wm8960.h b/sound/soc/codecs/wm8960.h index 2d8163d..ab3220d 100644 --- a/sound/soc/codecs/wm8960.h +++ b/sound/soc/codecs/wm8960.h @@ -82,6 +82,7 @@ #define WM8960_SYSCLK_MCLK (0 << 0) #define WM8960_SYSCLK_PLL (1 << 0) +#define WM8960_SYSCLK_AUTO (2 << 0) #define WM8960_DAC_DIV_1 (0 << 3) #define WM8960_DAC_DIV_1_5 (1 << 3) -- 1.9.1

2 2

[alsa-devel] [PATCH 1/3] ASoC: fsl-sai: add 32 bit word length support
by Zidan Wang 11 Aug '15

11 Aug '15

Add 32 bit word length support. Signed-off-by: Zidan Wang <zidan.wang(a)freescale.com> --- sound/soc/fsl/fsl_sai.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 0662809..40280ce 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -1,5 +1,5 @@ /* - * Copyright 2012-2013 Freescale Semiconductor, Inc. + * Copyright 2012-2015 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -13,7 +13,8 @@ #define FSL_SAI_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ SNDRV_PCM_FMTBIT_S20_3LE |\ - SNDRV_PCM_FMTBIT_S24_LE) + SNDRV_PCM_FMTBIT_S24_LE |\ + SNDRV_PCM_FMTBIT_S32_LE) /* SAI Register Map Register */ #define FSL_SAI_TCSR 0x00 /* SAI Transmit Control */ -- 1.9.1

3 8

[alsa-devel] [PATCH] jack: Fixing a small memory leak
by Valentin Corfu 11 Aug '15

11 Aug '15

A small memory leak can be observed when using alsa-plugins (jack). Check the following valgrind log: ... ==1034== 8 bytes in 1 blocks are definitely lost in loss record 7 of 108 ==1034== at 0x4027E5A: calloc (in /usr/lib/valgrind/vgpreload_memcheck-x86-linux.so) ==1034== by 0x4035102: snd_pcm_jack_prepare (in /usr/lib/alsa-lib/libasound_module_pcm_jack.so) ==1034== by 0x40D07AB: snd_pcm_ioplug_prepare (pcm_ioplug.c:145) ==1034== by 0x4084961: snd_pcm_prepare (pcm.c:1052) ==1034== by 0x409DDB4: snd_pcm_plugin_prepare (pcm_plugin.c:162) ==1034== by 0x4084961: snd_pcm_prepare (pcm.c:1052) ==1034== by 0x409DDB4: snd_pcm_plugin_prepare (pcm_plugin.c:162) ==1034== by 0x4084961: snd_pcm_prepare (pcm.c:1052) ==1034== by 0x4084A1D: snd_pcm_hw_params (pcm.c:838) ==1034== by 0x4090013: snd_pcm_set_params (pcm.c:8053) ==1034== by 0x80486EB: main (in /root/pcm_min_ok) ... ==1034== LEAK SUMMARY: ==1034== definitely lost: 8 bytes in 1 blocks ==1034== indirectly lost: 0 bytes in 0 blocks ==1034== possibly lost: 31,311 bytes in 1,630 blocks ==1034== still reachable: 5,619 bytes in 24 blocks ==1034== suppressed: 0 bytes in 0 blocks ... Signed-off-by: Valentin Corfu <corfuvalentin(a)gmail.com> --- jack/pcm_jack.c | 1 + 1 file changed, 1 insertion(+) diff --git a/jack/pcm_jack.c b/jack/pcm_jack.c index 568ec43..de9c46e 100644 --- a/jack/pcm_jack.c +++ b/jack/pcm_jack.c @@ -103,6 +103,7 @@ static void snd_pcm_jack_free(snd_pcm_jack_t *jack) if (jack->io.poll_fd >= 0) close(jack->io.poll_fd); free(jack->areas); + free(jack->ports); free(jack); } } -- 1.9.1

2 2