September 2014 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [RFC][PATCH 00/15 v4] OXFW driver, a succesor to firewire-speakers
by Takashi Sakamoto 26 Oct '14

26 Oct '14

This patchset updates a part of my previous series: [alsa-devel] [RFC v3] [PATCH 00/52] Enhancement for support of firewire devices http://mailman.alsa-project.org/pipermail/alsa-devel/2014-January/071820.ht… This patchset is based on this series. (This series is under reviewing.) [alsa-devel] [PATCH 00/49 v4] Enhancement for support of Firewire devices http://mailman.alsa-project.org/pipermail/alsa-devel/2014-April/075841.html If you try this patchset, please apply the series in advance and apply this patchset. Or just use backport codes in my github repository: https://github.com/takaswie/snd-firewire-improve Or if you use Ubuntu 14.04, DKMS package is available from David's PPA. (Special thanks to David Henningsson.) https://launchpad.net/~diwic/+archive/snd-firewire-improve If you have Griffin FireWave, I would strongly request to test. Please see 'An issue for FireWave' in this message. == Background Currently, in ALSA, 'firewire-speakers' driver supports OXFW970/971 chipset which Oxford Semiconductor produced. But this driver has some restrictions: - Don't support MIDI substreams - Don't support substreams for PCM/MIDI capturing There are several devices which are based on OXFW970/971. Especially, devices which Behringer and Mackie produced support playback/capture PCM samples/MIDI messages. So firewire-speakers needs re-work to support these devices. This patchset renames 'firewire-speakers' to 'oxfw'. Maintainers already agreed to rename firewire-speakers to suitable name, in my first RFC in Jan 2014. == Supported devices Currently these devices are supported: * Griffin Firewave * LaCie Firewire Speakers * Behringer F-Control Audio 202 * Mackie(Loud) Onyx-i series (former models) * Mackie(Loud) Onyx Satellite * Mackie(Loud) Tapco Link.Firewire These devices can be supported but its IDs are unknown: * Mackie(Loud), d.2 pro * Mackie(Loud), d.4 pro * Mackie(Loud), U.420 * Mackie(Loud), U.420d When you have unknown devices, please inform me output of this command: $ hexdump -C /sys/bus/firewire/devices/fwX/config_rom (X is node id for your device. Tipically '1'.) I tested this driver with Behringer F-Control Audio 202. == Features - Capturing/Playbacking PCM samples/MIDI messages at supported sampling rates via ALSA PCM/MIDI interfaces - Retrieving firewire node information via ALSA hwdep interface - Locking/Unlocking kernel streaming via ALSA hwdep interface - Receiving notification at starting/stopping kernel streaming via ALSA hwdep interface == Solutions for reported regressions Two regressions were reported for my previous series: 1.Some names in card structure is trimmed. http://mailman.alsa-project.org/pipermail/alsa-devel/2014-February/073128.h… 2.The number of PCM channels are not detected correctly. http://mailman.alsa-project.org/pipermail/alsa-devel/2014-February/073145.h… The cause of issue 1 is that the device has too long names in its config rom. To solve this issue, for the driver, this patchset uses the same way which firewire-speakers uses, propper alias in device-specific structure. The cause of issue 2 is that the device has several format entries for the same sampling rate: http://mailman.alsa-project.org/pipermail/alsa-devel/2014-February/073561.h… To solve this issue, this patchset includes improved mechanism to detect stream formation. Additionally, this patchset adds new device entry for Mackie(Loud) Tapco Link.Firewire, refering to FFADO bug ticket 236: http://subversion.ffado.org/ticket/236 == An issue for FireWave I have an issue for Griffin Firewave. This device can handle AV/C Stream Format Information command and driver can get to know stream formations via the command. With Stefan's help, responses from FireWave against this command are clear. http://mailman.alsa-project.org/pipermail/alsa-devel/2014-February/073561.h… According to these responses, supported formations are: Input Stream to device: Rate PCM MIDI 32000 6 0 44100 6 0 48000 6 0 96000 6 0 32000 2 0 44100 2 0 48000 2 0 0 0 0 0 0 0 0 0 0 (I also expect to get this output from /proc/asound/FireWave/firewire/formation. I note it's order is not important.) But current 'firewire-speakers' has PCM constraints below: - 6ch at 32/44.1/48/96 kHz - 2ch at 48/96 kHz http://mailman.alsa-project.org/pipermail/alsa-devel/2014-February/073562.h… So this OXFW driver may lost a support for 2ch/96.0kHz for FireWave and gain 2ch/32.0kHz and 2ch/44.1kHz. I don't know exactly the reason of these gaps. So I strongly hope testers to check these two items: - FireWave really can handle 2ch/96kHz with firewire-speakers driver. - FireWave really can handle 2ch/32.0kHz and 2ch/44.1kHz with oxfw driver. I think a test with aplay is easy to execute: $ aplay -D hw:FireWave -f S32_LE -c 2 -r 96000 /dev/urandom $ aplay -D hw:FireWave -f S32_LE -c 2 -r 48000 /dev/urandom $ aplay -D hw:FireWave -f S32_LE -c 2 -r 44100 /dev/urandom $ aplay -D hw:FireWave -f S32_LE -c 2 -r 32000 /dev/urandom If 2ch/96kHz is apparently available, I'll change codes as a quirk. FYI, when I tested unavailable number of PCM channels with a hack, FCA202 playback PCM substreams but becomes freezed after stopping streaming. $ cat /var/log/syslog ... kernel: [10098.670390] snd_oxfw fw1.0: transaction failed: timeout ... I believe the other OXFW970/971 based devices have a similar behaviour. ================ Takashi Sakamoto (15): speakers: Rename to oxfw and rename some members oxfw: Move to its own directory oxfw: Split stream functionality to a new file and add a header file oxfw: Split PCM functionality to a new file oxfw: Split control functionality to a new file oxfw: Change the way to name card oxfw: Change the way to make PCM rules/constraints oxfw: Add proc interface for debugging purpose oxfw: Change the way to start stream oxfw: Add support for AV/C stream format command to get supported stream formation oxfw: Add a quirk for Griffin FireWave oxfw: Add support for Behringer/Mackie devices oxfw: Add support AMDTP in-stream and PCM capture oxfw: Add support for capture/playback MIDI messages oxfw: Add hwdep interface include/uapi/sound/asound.h | 3 +- include/uapi/sound/firewire.h | 3 +- sound/firewire/Kconfig | 18 +- sound/firewire/Makefile | 3 +- sound/firewire/oxfw/Makefile | 3 + sound/firewire/oxfw/oxfw.c | 284 +++++++++++++ sound/firewire/oxfw/oxfw.h | 141 +++++++ sound/firewire/oxfw/oxfw_command.c | 113 ++++++ sound/firewire/oxfw/oxfw_control.c | 283 +++++++++++++ sound/firewire/oxfw/oxfw_hwdep.c | 190 +++++++++ sound/firewire/oxfw/oxfw_midi.c | 168 ++++++++ sound/firewire/oxfw/oxfw_pcm.c | 367 +++++++++++++++++ sound/firewire/oxfw/oxfw_proc.c | 83 ++++ sound/firewire/oxfw/oxfw_stream.c | 658 ++++++++++++++++++++++++++++++ sound/firewire/speakers.c | 792 ------------------------------------- 15 files changed, 2308 insertions(+), 801 deletions(-) create mode 100644 sound/firewire/oxfw/Makefile create mode 100644 sound/firewire/oxfw/oxfw.c create mode 100644 sound/firewire/oxfw/oxfw.h create mode 100644 sound/firewire/oxfw/oxfw_command.c create mode 100644 sound/firewire/oxfw/oxfw_control.c create mode 100644 sound/firewire/oxfw/oxfw_hwdep.c create mode 100644 sound/firewire/oxfw/oxfw_midi.c create mode 100644 sound/firewire/oxfw/oxfw_pcm.c create mode 100644 sound/firewire/oxfw/oxfw_proc.c create mode 100644 sound/firewire/oxfw/oxfw_stream.c delete mode 100644 sound/firewire/speakers.c -- 1.8.3.2

3 34

[alsa-devel] [PATCH 0/5] Add Phytec pbab01 audio support
by Dmitry Lavnikevich 22 Oct '14

22 Oct '14

This patchset implements audio support on Phytec's phyFLEX-i.MX6 boards. This includes creating imx-tlv320aic3x machine driver, fixing tlv320aic3x driver playback speed issue and enabling audio for pbab01 itself.

10 44

[alsa-devel] [PATCH 1/2] MAINTAINERS: add atmel ssc driver maintainer entry
by Bo Shen 21 Oct '14

21 Oct '14

Signed-off-by: Bo Shen <voice.shen(a)atmel.com> --- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 3705430..c004e6f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1703,6 +1703,13 @@ M: Nicolas Ferre <nicolas.ferre(a)atmel.com> S: Supported F: drivers/spi/spi-atmel.* +ATMEL SSC DRIVER +M: Bo Shen <voice.shen(a)atmel.com> +L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) +S: Supported +F: drivers/misc/atmel-ssc.c +F: include/linux/atmel-ssc.h + ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS M: Nicolas Ferre <nicolas.ferre(a)atmel.com> L: linux-arm-kernel(a)lists.infradead.org (moderated for non-subscribers) -- 2.1.0.24.g4109c28

4 6

Re: [alsa-devel] [PATCH v2] ASoC: simple-card: add asoc_simple_card_parse_daifmt()
by Mark Brown 21 Oct '14

21 Oct '14

On Tue, Sep 23, 2014 at 07:29:34PM -0700, Kuninori Morimoto wrote: > > Hi Mark > > Should I re-send this patch ? Don't top post... I've been at Linaro Connect so haven't had a chance to look at it.

2 3

[alsa-devel] [TINYCOMPRESS][PATCH] crec: Fix error with opening file using O_CREAT
by Richard Fitzgerald 17 Oct '14

17 Oct '14

From: Ammar Zahid Ali Syed <ammar.zhd(a)googlemail.com> The code was not compiling when mode was not passed to open() while using O_CREAT offset. Passed mode to the open() alongwith O_CREAT to specify the attributes of file and fix compile issue. Signed-off-by: Ammar Zahid Ali Syed <ammar.zhd(a)googlemail.com> --- crec.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/crec.c b/crec.c index 31703c5..e3f189f 100644 --- a/crec.c +++ b/crec.c @@ -66,6 +66,8 @@ #include <stdbool.h> #include <getopt.h> #include <sys/time.h> +#include <sys/types.h> +#include <sys/stat.h> #define __force #define __bitwise #define __user @@ -256,7 +258,7 @@ void capture_samples(char *name, unsigned int card, unsigned int device, if (verbose) printf("%s: entry, reading %u bytes\n", __func__, length); - file = open(name, O_RDWR | O_CREAT); + file = open(name, O_RDWR | O_CREAT, S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP); if (file == -1) { fprintf(stderr, "Unable to open file '%s'\n", name); exit(EXIT_FAILURE); -- 1.7.2.5

2 1

[alsa-devel] How to select input from muxer in front of SSI on i.MX6
by Jean-Michel Hautbois 13 Oct '14

13 Oct '14

Hi, I am now working on making my audio path working completely. And I get some difficulties to write a DT for my needs. I join a picture which is not the reality but a simplified version of the board. I have a FPGA between my codecs and my i.MX6. This FPGA is responsible of lots of things, and in particular of muxing signals. I can program it in order to get the audio signal I want on the SSI I want (so sgtl5000 can ben on SSI1 or SSI2 or both). This path is not a single codec, but a multiple codec one. So I can have on SSI1 LineIn from sgtl5000 or audio from hdmi (adv7611). I don't know how to write it in DT, regarding audmux for instance, and the sound{} node... And I don't know how to drive all these peripherals (from arecord, I wish I have hw:0,0 is LineIn, hw:0;1 is HDMI, etc.). Any help would be appreciated :). Thanks, JM

3 7

[alsa-devel] [PATCH v3] ES938 support for ES18xx driver
by Ondrej Zary 13 Oct '14

13 Oct '14

Add support for ES938 3-D Audio Effects Processor found on some ES18xx (and possibly other) sound cards, doing bass/treble and 3D control. ES938 is controlled by MIDI SysEx commands sent through card's MPU401 port. The code opens/closes the MIDI device everytime a mixer control value is changed so userspace apps can still use the MIDI port. Changing the mixer controls will fail when the MIDI port is open by an application. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> --- Changes in v3: - constify buf argument to snd_rawmidi_kernel_write - remove double if from probe - spelling fix Changes in v2: - debug message when ES938 detected - reworked sysex messages to use structs - ktime instead of jiffies for timeout --- sound/isa/Kconfig | 4 + sound/isa/Makefile | 2 + sound/isa/es18xx.c | 13 +++- sound/isa/es938.c | 217 ++++++++++++++++++++++++++++++++++++++++++++++++++++ sound/isa/es938.h | 48 ++++++++++++ 5 files changed, 283 insertions(+), 1 deletion(-) create mode 100644 sound/isa/es938.c create mode 100644 sound/isa/es938.h diff --git a/sound/isa/Kconfig b/sound/isa/Kconfig index 0216475..db0b678 100644 --- a/sound/isa/Kconfig +++ b/sound/isa/Kconfig @@ -17,6 +17,9 @@ config SND_SB16_DSP select SND_PCM select SND_SB_COMMON +config SND_ES938 + tristate + menuconfig SND_ISA bool "ISA sound devices" depends on ISA && ISA_DMA_API @@ -183,6 +186,7 @@ config SND_ES18XX select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM + select SND_ES938 help Say Y here to include support for ESS AudioDrive ES18xx chips. diff --git a/sound/isa/Makefile b/sound/isa/Makefile index 9a15f14..d59e0bf 100644 --- a/sound/isa/Makefile +++ b/sound/isa/Makefile @@ -8,6 +8,7 @@ snd-als100-objs := als100.o snd-azt2320-objs := azt2320.o snd-cmi8328-objs := cmi8328.o snd-cmi8330-objs := cmi8330.o +snd-es938-objs := es938.o snd-es18xx-objs := es18xx.o snd-opl3sa2-objs := opl3sa2.o snd-sc6000-objs := sc6000.o @@ -19,6 +20,7 @@ obj-$(CONFIG_SND_ALS100) += snd-als100.o obj-$(CONFIG_SND_AZT2320) += snd-azt2320.o obj-$(CONFIG_SND_CMI8328) += snd-cmi8328.o obj-$(CONFIG_SND_CMI8330) += snd-cmi8330.o +obj-$(CONFIG_SND_ES938) += snd-es938.o obj-$(CONFIG_SND_ES18XX) += snd-es18xx.o obj-$(CONFIG_SND_OPL3SA2) += snd-opl3sa2.o obj-$(CONFIG_SND_SC6000) += snd-sc6000.o diff --git a/sound/isa/es18xx.c b/sound/isa/es18xx.c index 6faaac6..72dad69 100644 --- a/sound/isa/es18xx.c +++ b/sound/isa/es18xx.c @@ -96,6 +96,7 @@ #define SNDRV_LEGACY_FIND_FREE_IRQ #define SNDRV_LEGACY_FIND_FREE_DMA #include <sound/initval.h> +#include "es938.h" #define PFX "es18xx: " @@ -122,6 +123,7 @@ struct snd_es18xx { struct snd_pcm_substream *playback_b_substream; struct snd_rawmidi *rmidi; + struct snd_es938 es938; struct snd_kcontrol *hw_volume; struct snd_kcontrol *hw_switch; @@ -2167,7 +2169,16 @@ static int snd_audiodrive_probe(struct snd_card *card, int dev) return err; } - return snd_card_register(card); + err = snd_card_register(card); + if (err < 0) + return err; + + /* no error if this fails because ES938 is optional */ + if (mpu_port[dev] > 0 && mpu_port[dev] != SNDRV_AUTO_PORT && + snd_es938_init(&chip->es938, card, 0, 0) == 0) + snd_printk(KERN_DEBUG "found ES938 audio processor\n"); + + return 0; } static int snd_es18xx_isa_match(struct device *pdev, unsigned int dev) diff --git a/sound/isa/es938.c b/sound/isa/es938.c new file mode 100644 index 0000000..75d1fbe --- /dev/null +++ b/sound/isa/es938.c @@ -0,0 +1,217 @@ +/* + * Driver for ESS ES938 3-D Audio Effects Processor + * Copyright (c) 2014 Ondrej Zary + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <sound/asoundef.h> +#include <sound/control.h> +#include <sound/core.h> +#include <sound/rawmidi.h> +#include "es938.h" + +MODULE_AUTHOR("Ondrej Zary"); +MODULE_DESCRIPTION("ESS ES938"); +MODULE_LICENSE("GPL"); + +static int snd_es938_read_reg(struct snd_es938 *chip, u8 reg, u8 *out) +{ + int i = 0, res; + const struct snd_es938_sysex_reg req = { + .midi_cmd = MIDI_CMD_COMMON_SYSEX, + .id = ES938_ID, + .cmd = ES938_CMD_REG_R, + .reg = reg, + .midi_end = MIDI_CMD_COMMON_SYSEX_END, + }; + struct snd_es938_sysex_regval reply = { }; + u8 *p = (void *)&reply; + ktime_t end_time; + + snd_rawmidi_kernel_write(chip->rfile.output, + (const void *)&req, sizeof(req)); + + end_time = ktime_add_ms(ktime_get(), 100); + while (i < sizeof(reply)) { + res = snd_rawmidi_kernel_read(chip->rfile.input, p + i, + sizeof(reply) - i); + if (res > 0) + i += res; + if (ktime_after(ktime_get(), end_time)) + return -1; + } + + /* check if the reply is ours and has SYSEX_END at the end */ + if (memcmp(&reply, &req, sizeof(req) - 1) || + reply.midi_end != MIDI_CMD_COMMON_SYSEX_END) + return -1; + + if (out) + *out = reply.val; + + return 0; +} + +static void snd_es938_write_reg(struct snd_es938 *chip, u8 reg, u8 val) +{ + const struct snd_es938_sysex_regval req = { + .midi_cmd = MIDI_CMD_COMMON_SYSEX, + .id = ES938_ID, + .cmd = ES938_CMD_REG_W, + .reg = reg, + .val = val, + .midi_end = MIDI_CMD_COMMON_SYSEX_END, + }; + + snd_rawmidi_kernel_write(chip->rfile.output, + (const void *)&req, sizeof(req)); + chip->regs[reg] = val; +} + +#define ES938_MIXER(xname, xindex, reg, shift, mask) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ +.info = snd_es938_info_mixer, \ +.get = snd_es938_get_mixer, .put = snd_es938_put_mixer, \ +.private_value = reg | (shift << 8) | (mask << 16) } + +#define ES938_MIXER_TLV(xname, xindex, reg, shift, mask, xtlv) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex, \ +.access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, \ +.info = snd_es938_info_mixer, \ +.get = snd_es938_get_mixer, .put = snd_es938_put_mixer, \ +.private_value = reg | (shift << 8) | (mask << 16), \ +.tlv = { .p = (xtlv) } } + +static const DECLARE_TLV_DB_SCALE(db_scale_tone, -900, 300, 0); + +static struct snd_kcontrol_new snd_es938_controls[] = { +ES938_MIXER_TLV("Tone Control - Bass", 0, ES938_REG_TONE, 0, 7, db_scale_tone), +ES938_MIXER_TLV("Tone Control - Treble", 0, ES938_REG_TONE, 4, 7, db_scale_tone), +ES938_MIXER("3D Control - Level", 0, ES938_REG_SPATIAL, 1, 63), +ES938_MIXER("3D Control - Switch", 0, ES938_REG_SPATIAL_EN, 0, 1), +}; + +int snd_es938_init(struct snd_es938 *chip, struct snd_card *card, int device, + int subdevice) +{ + int ret, i; + + ret = snd_rawmidi_kernel_open(card, device, subdevice, + SNDRV_RAWMIDI_LFLG_OPEN | SNDRV_RAWMIDI_LFLG_APPEND, + &chip->rfile); + if (ret < 0) { + snd_printk(KERN_WARNING "es938: unable to open MIDI device\n"); + return ret; + } + + /* try to read a register to detect chip presence */ + if (snd_es938_read_reg(chip, ES938_REG_MISC, NULL) < 0) { + ret = -ENODEV; + goto err; + } + + /* write default values (there's no reset) */ + snd_es938_write_reg(chip, ES938_REG_MISC, 0x49); + snd_es938_write_reg(chip, ES938_REG_TONE, 0x33); + /* reserved bit 0 must be set for 3D to work */ + snd_es938_write_reg(chip, ES938_REG_SPATIAL, 0x01); + /* datasheet specifies invalid value 0x00 as default */ + snd_es938_write_reg(chip, ES938_REG_SPATIAL_EN, 0x02); + snd_es938_write_reg(chip, ES938_REG_POWER, 0x0e); + + strlcat(card->mixername, " + ES938", sizeof(card->mixername)); + for (i = 0; i < ARRAY_SIZE(snd_es938_controls); i++) { + ret = snd_ctl_add(card, + snd_ctl_new1(&snd_es938_controls[i], chip)); + if (ret < 0) + goto err; + } + + chip->card = card; + chip->device = device; + chip->subdevice = subdevice; +err: + snd_rawmidi_kernel_release(&chip->rfile); + + return ret; +} +EXPORT_SYMBOL(snd_es938_init); + +int snd_es938_info_mixer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + int mask = (kcontrol->private_value >> 16) & 0xff; + + uinfo->type = mask == 1 ? SNDRV_CTL_ELEM_TYPE_BOOLEAN : + SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = mask; + return 0; +} +EXPORT_SYMBOL(snd_es938_info_mixer); + +int snd_es938_get_mixer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_es938 *chip = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int shift = (kcontrol->private_value >> 8) & 0xff; + int mask = (kcontrol->private_value >> 16) & 0xff; + u8 val = chip->regs[reg]; + + ucontrol->value.integer.value[0] = (val >> shift) & mask; + return 0; +} +EXPORT_SYMBOL(snd_es938_get_mixer); + +int snd_es938_put_mixer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_es938 *chip = snd_kcontrol_chip(kcontrol); + int reg = kcontrol->private_value & 0xff; + int shift = (kcontrol->private_value >> 8) & 0xff; + int mask = (kcontrol->private_value >> 16) & 0xff; + u8 val = ucontrol->value.integer.value[0] & mask; + u8 oldval = chip->regs[reg]; + u8 newval; + int err; + + mask <<= shift; + val <<= shift; + + newval = (oldval & ~mask) | val; + if (newval == oldval) + return 0; + + /* this will fail if the MIDI port is used by an application */ + err = snd_rawmidi_kernel_open(chip->card, chip->device, + chip->subdevice, + SNDRV_RAWMIDI_LFLG_OPEN | SNDRV_RAWMIDI_LFLG_APPEND, + &chip->rfile); + if (err < 0) + return err; + + snd_es938_write_reg(chip, reg, newval); + + snd_rawmidi_kernel_release(&chip->rfile); + + return 1; +} +EXPORT_SYMBOL(snd_es938_put_mixer); diff --git a/sound/isa/es938.h b/sound/isa/es938.h new file mode 100644 index 0000000..08148ff --- /dev/null +++ b/sound/isa/es938.h @@ -0,0 +1,48 @@ +#include <sound/tlv.h> + +#define ES938_ID 0x7b + +#define ES938_CMD_REG_R 0x7e +#define ES938_CMD_REG_W 0x7f + +#define ES938_REG_MISC 0 +#define ES938_REG_TONE 1 +#define ES938_REG_SPATIAL 5 +#define ES938_REG_SPATIAL_EN 6 +#define ES938_REG_POWER 7 + +struct snd_es938 { + u8 regs[8]; + struct snd_card *card; + int device; + int subdevice; + struct snd_rawmidi_file rfile; +}; + +struct snd_es938_sysex_reg { + u8 midi_cmd; + u8 zeros[2]; + u8 id; + u8 cmd; + u8 reg; + u8 midi_end; +}; + +struct snd_es938_sysex_regval { + u8 midi_cmd; + u8 zeros[2]; + u8 id; + u8 cmd; + u8 reg; + u8 val; + u8 midi_end; +}; + +int snd_es938_init(struct snd_es938 *chip, struct snd_card *card, int device, + int subdevice); +int snd_es938_info_mixer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo); +int snd_es938_get_mixer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); +int snd_es938_put_mixer(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol); -- Ondrej Zary

5 10

[alsa-devel] No sound captured with SGTL5000 on i.MX6 in I²S master mode
by Jean-Michel Hautbois 10 Oct '14

10 Oct '14

Hi, Sorry if double posting, I have not received confirmation on subscription yesterday... So I try again :/. I have a custom i.MX6 board, and have a sgtl5000 connected on it. I would like to have it used in master mode (it is used only for audio capture) but I get a "pcm_read:2031: read error: Input/output error" when using arecord. I have checked my signals and I get something on I²S which seems to be good. I launch : $> arecord -f cd -Dhw:0,0 -v -V stereo Receive Frame Sync is 44.1KHz Receive Clock Signal is ~1MHz (I can be more precise if needed) Data Receive is present, only when arecord is launched. It stops when there is no capture asked. Both clocks are still present even when no arecord is running. This suggests, for me, that master mode is working. So, I don't know why I can't get any data to my arecord. Is this a left/right justified master mode ? Anything else ? I am wondering if I forgot something in my DT or if I need to do something else : sound { compatible = "fsl,imx6q-vbx3-sgtl5000", "fsl,imx-audio-sgtl5000"; model = "imx6q-vbx3-sgtl5000"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = "LINE_IN", "Line In Jack"; mux-int-port = <1>; mux-ext-port = <5>; }; &audmux { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; status = "okay"; }; &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 201>; VDDA-supply = <&vgen6_reg>; VDDIO-supply = <&vgen6_reg>; sysclk = <24000000>; }; }; &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; imx6qdl-vbx3 { pinctrl_audmux: audmuxgrp { fsl,pins = < MX6QDLPAD_DISP0_DAT13__AUD5_RXFS 0x130b0 MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x130b0 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 >; }; }; &ssi1 { status = "okay"; codec-handle = <&codec>; fsl,mode = "i2s-master"; fsl,ssi-asynchronous; /* Not sure about it, but does not change anything */ }; Here is the dmesg part : [ 6.026803] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 6.129380] imx-sgtl5000 sound: snd_soc_register_card failed (-517) [ 6.248849] platform sound: Driver imx-sgtl5000 requests probe deferral [ 6.311643] sgtl5000 1-000a: Using internal LDO instead of VDDD [ 6.393196] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok And the user space commands : $> arecord -l **** List of CAPTURE Hardware Devices **** card 0: imx6qvbx3sgtl50 [imx6q-vbx3-sgtl5000], device 0: HiFi sgtl5000-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 $> arecord -v -V stereo -fdat -D hw:0,0 somefile.wav Recording WAVE 'somefile.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo Hardware PCM card 0 'imx6q-vbx3-sgtl5000' device 0 subdevice 0 Its setup is: stream : CAPTURE access : RW_INTERLEAVED format : S16_LE subformat : STD channels : 2 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 16384 period_size : 4096 period_time : 85333 tstamp_mode : NONE period_step : 1 avail_min : 4096 period_event : 0 start_threshold : 1 stop_threshold : 16384 silence_threshold: 0 silence_size : 0 boundary : 1073741824 appl_ptr : 0 hw_ptr : 0 arecord: pcm_read:2031: read error: Input/output error The kernel is 3.17-rc5. Thanks for reading all this, and for any advice :). JM

4 35

[alsa-devel] HDA: Missing Dock LineIn/Out with Lenovo L440 on Pro Dock
by Sascha Wilde 08 Oct '14

08 Oct '14

Hi *, using a Lenovo L440 Laptop on a Lenovo Pro Dock the combined line-in/out jack at the docking station can not be used for output (input untested). Output on the internal combined line-in/out jack works, as well as output on the internal speakers. Its intel-hda with Realtek ALC292. For more details see alsa-info.sh output below. Loading the driver with model=lenovo-dock does not help. I guess quirks for the pins leading to the external dock jack are missing. Please let me know if you need any further information. Any help highly appreciated. :) cheers sascha Output of alsa-info follows: ---------------------------------------------------------------------->8- upload=true&script=true&cardinfo= !!################################ !!ALSA Information Script v 0.4.63 !!################################ !!Script ran on: Fri Jun 6 10:54:38 UTC 2014 !!Linux Distribution !!------------------ Arch Linux \r (\l) NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/" !!DMI Information !!--------------- Manufacturer: LENOVO Product Name: 20ATCTO1WW Product Version: ThinkPad L440 Firmware Version: J4ET62WW(1.62) !!Kernel Information !!------------------ Kernel release: 3.14.5-1-ARCH Operating System: GNU/Linux Architecture: x86_64 Processor: unknown SMP Enabled: Yes !!ALSA Version !!------------ Driver version: k3.14.5-1-ARCH Library version: 1.0.27.2 Utilities version: 1.0.27.2 !!Loaded ALSA modules !!------------------- snd_hda_intel snd_hda_intel snd_usb_audio thinkpad_acpi !!Sound Servers on this system !!---------------------------- Jack: Installed - Yes (/usr/bin/jackd) Running - No !!Soundcards recognised by ALSA !!----------------------------- 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf2530000 irq 48 1 [PCH ]: HDA-Intel - HDA Intel PCH HDA Intel PCH at 0xf2534000 irq 45 2 [Q9000 ]: USB-Audio - QuickCam Pro 9000 Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:14.0-9.1, high speed 29 [ThinkPadEC ]: ThinkPad EC - ThinkPad Console Audio Control ThinkPad Console Audio Control at EC reg 0x30, fw unknown !!PCI Soundcards installed in the system !!-------------------------------------- 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) !!Advanced information - PCI Vendor/Device/Subsystem ID's !!------------------------------------------------------- 00:03.0 0403: 8086:0c0c (rev 06) Subsystem: 17aa:501e -- 00:1b.0 0403: 8086:8c20 (rev 05) Subsystem: 17aa:501e !!Modprobe options (Sound related) !!-------------------------------- snd_hda_intel: model=lenovo-dock !!Loaded sound module options !!--------------------------- !!Module: snd_hda_intel align_buffer_size : -1 bdl_pos_adj : 32,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : lenovo-dock,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y !!Module: snd_hda_intel align_buffer_size : -1 bdl_pos_adj : 32,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y enable_msi : -1 id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 model : lenovo-dock,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 power_save : 0 power_save_controller : Y probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 single_cmd : N snoop : Y !!Module: snd_usb_audio autoclock : Y device_setup : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null) ignore_ctl_error : N index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 pid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 vid : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1 !!Module: thinkpad_acpi brightness_enable : 2 brightness_mode : 4 enable : Y experimental : 0 fan_control : N force_load : N id : ThinkPadEC index : -536870912 volume_capabilities : 0 volume_control : N volume_mode : 3 !!HDA-Intel Codec information !!--------------------------- --startcollapse-- Codec: Intel Haswell HDMI Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x80862807 Subsystem Id: 0x80860101 Revision Id: 0x100000 No Modem Function Group found Default PCM: rates [0x0]: bits [0x0]: formats [0x0]: Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D3 CLKSTOP EPSS Power: setting=D0, actual=D0, Clock-stop-OK GPIO: io=0, o=0, i=0, unsolicited=0, wake=0 Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital Converter: stream=0, channel=0 Digital: Enabled KAE Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000 bits [0x1e]: 16 20 24 32 formats [0x5]: PCM AC3 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=0, device=0 Control: name="IEC958 Playback Pro Mask", index=0, device=0 Control: name="IEC958 Playback Default", index=0, device=0 Control: name="IEC958 Playback Switch", index=0, device=0 Control: name="ELD", index=0, device=3 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560010: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=01, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=1, device=0 Control: name="IEC958 Playback Pro Mask", index=1, device=0 Control: name="IEC958 Playback Default", index=1, device=0 Control: name="IEC958 Playback Switch", index=1, device=0 Control: name="ELD", index=0, device=7 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560020: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=02, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0 Control: name="IEC958 Playback Con Mask", index=2, device=0 Control: name="IEC958 Playback Pro Mask", index=2, device=0 Control: name="IEC958 Playback Default", index=2, device=0 Control: name="IEC958 Playback Switch", index=2, device=0 Control: name="ELD", index=0, device=8 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0b000094: OUT Detect HBR HDMI DP Pin Default 0x18560030: [Jack] Digital Out at Int HDMI Conn = Digital, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Pin-ctls: 0x00: Unsolicited: tag=03, enabled=1 Power states: D0 D3 EPSS Power: setting=D0, actual=D0 Devices: 0 Connection: 0 In-driver Connection: 3 0x02 0x03 0x04 Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono Codec: Realtek ALC292 Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0292 Subsystem Id: 0x17aa501e Revision Id: 0x100001 No Modem Function Group found Default PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A State of AFG node 0x01: Power states: D0 D1 D2 D3 CLKSTOP EPSS Power: setting=D0, actual=D0 GPIO: io=5, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[4]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC292 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x3d 0x3d] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Speaker Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x3d 0x3d] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 IEC Coding Type: 0x0 PCM: rates [0x5f0]: 32000 44100 48000 88200 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x97 0x97] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In Control: name="Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Capture Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="ALC292 Analog", type="Audio", device=0 Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1 Amp-In vals: [0x27 0x27] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x22 Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Control: name="Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Beep Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Control: name="Beep Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=4, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 5 0x18 0x19 0x1a 0x1b 0x1d Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x80] [0x00] Connection: 2 0x02 0x03 Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Control: name="Internal Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Internal Mic Phantom Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x02 0x02] Pincap 0x00000020: IN Pin Default 0x90a60130: [Fixed] Mic at Int N/A Conn = Digital, Color = Unknown DefAssociation = 0x3, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x13 [Pin Complex] wcaps 0x40040b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000020: IN Pin Default 0x40000000: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown DefAssociation = 0x0, Sequence = 0x0 Pin-ctls: 0x00: Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Speaker Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Speaker Phantom Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00010010: OUT EAPD EAPD 0x2: EAPD Pin Default 0x90170110: [Fixed] Speaker at Int N/A Conn = Analog, Color = Unknown DefAssociation = 0x1, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c 0x0d* Node 0x15 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Control: name="Headphone Jack", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x0321101f: [Jack] HP Out at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x1, Sequence = 0xf Pin-ctls: 0xc0: OUT HP Unsolicited: tag=01, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x16 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x0001001c: OUT HP EAPD Detect EAPD 0x2: EAPD Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00000024: IN Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In Control: name="Mic Boost Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Mic Jack", index=0, device=0 Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Pincap 0x00003724: IN Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x03a11020: [Jack] Mic at Ext Left Conn = 1/8, Color = Black DefAssociation = 0x2, Sequence = 0x0 Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=02, enabled=1 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x00003734: IN OUT Detect Vref caps: HIZ 50 GRD 80 100 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 2 0x0c* 0x0d Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1d [Pin Complex] wcaps 0x400400: Mono Pincap 0x00000020: IN Pin Default 0x40738105: [N/A] Modem Hand at Ext N/A Conn = ATAPI, Color = Purple DefAssociation = 0x0, Sequence = 0x5 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital Pincap 0x00000014: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=124 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 8 0x18 0x19 0x1a 0x1b 0x1d 0x0b 0x12* 0x13 Node 0x23 [Audio Selector] wcaps 0x300101: Stereo Connection: 6 0x18* 0x19 0x1a 0x1b 0x1d 0x0b Node 0x24 [Vendor Defined Widget] wcaps 0xf00000: Mono --endcollapse-- !!USB Mixer information !!--------------------- --startcollapse-- USB Mixer: usb_id=0x046d0990, ctrlif=2, ctlerr=0 Card: Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:14.0-9.1, high speed Unit: 5 Control: name="Mic Capture Volume", index=0 Info: id=5, control=2, cmask=0x0, channels=1, type="S16" Volume: min=4608, max=7680, dBmin=1800, dBmax=3000 Unit: 5 Control: name="Mic Capture Switch", index=0 Info: id=5, control=1, cmask=0x0, channels=1, type="INV_BOOLEAN" Volume: min=0, max=1, dBmin=0, dBmax=0 --endcollapse-- !!ALSA Device nodes !!----------------- crw-rw----+ 1 root audio 116, 11 Jun 5 09:35 /dev/snd/controlC0 crw-rw----+ 1 root audio 116, 6 Jun 5 09:35 /dev/snd/controlC1 crw-rw----+ 1 root audio 116, 13 Jun 6 12:38 /dev/snd/controlC2 crw-rw----+ 1 root audio 116, 2 Jun 5 09:35 /dev/snd/controlC29 crw-rw----+ 1 root audio 116, 10 Jun 5 09:35 /dev/snd/hwC0D0 crw-rw----+ 1 root audio 116, 5 Jun 5 09:35 /dev/snd/hwC1D0 crw-rw----+ 1 root audio 116, 9 Jun 5 09:35 /dev/snd/pcmC0D3p crw-rw----+ 1 root audio 116, 8 Jun 5 09:35 /dev/snd/pcmC0D7p crw-rw----+ 1 root audio 116, 7 Jun 5 09:35 /dev/snd/pcmC0D8p crw-rw----+ 1 root audio 116, 4 Jun 6 11:41 /dev/snd/pcmC1D0c crw-rw----+ 1 root audio 116, 3 Jun 6 12:38 /dev/snd/pcmC1D0p crw-rw----+ 1 root audio 116, 12 Jun 6 12:38 /dev/snd/pcmC2D0c crw-rw----+ 1 root audio 116, 1 Jun 5 17:36 /dev/snd/seq crw-rw----+ 1 root audio 116, 33 Jun 5 09:35 /dev/snd/timer /dev/snd/by-id: total 0 drwxr-xr-x 2 root root 60 Jun 6 12:38 . drwxr-xr-x 4 root root 360 Jun 6 12:38 .. lrwxrwxrwx 1 root root 12 Jun 6 12:38 usb-046d_0990_2648235F-02 -> ../controlC2 /dev/snd/by-path: total 0 drwxr-xr-x 2 root root 120 Jun 6 12:38 . drwxr-xr-x 4 root root 360 Jun 6 12:38 .. lrwxrwxrwx 1 root root 12 Jun 5 09:35 pci-0000:00:03.0 -> ../controlC0 lrwxrwxrwx 1 root root 12 Jun 6 12:38 pci-0000:00:14.0-usb-0:9.1:1.2 -> ../controlC2 lrwxrwxrwx 1 root root 12 Jun 5 09:35 pci-0000:00:1b.0 -> ../controlC1 lrwxrwxrwx 1 root root 13 Jun 5 09:35 platform-thinkpad_acpi -> ../controlC29 !!ALSA configuration files !!------------------------ !!System wide config file (/etc/asound.conf) pcm.!default { type plug slave.pcm { type asym playback.pcm "mixout" capture.pcm "mixin" } } pcm.mixout { type dmix ipc_key 1024 slave { pcm "hw:1,0" } bindings { 0 0 1 1 } } pcm.mixin { type dsnoop ipc_key 1234 slave { pcm "hw:1,0" } } ctl.!default { type hw card PCH } !!Aplay/Arecord output !!-------------------- APLAY **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC292 Analog [ALC292 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 ARECORD **** List of CAPTURE Hardware Devices **** card 1: PCH [HDA Intel PCH], device 0: ALC292 Analog [ALC292 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 2: Q9000 [QuickCam Pro 9000], device 0: USB Audio [USB Audio] Subdevices: 1/1 Subdevice #0: subdevice #0 !!Amixer output !!------------- !!-------Mixer controls for card 0 [HDMI] Card hw:0 'HDMI'/'HDA Intel HDMI at 0xf2530000 irq 48' Mixer name : 'Intel Haswell HDMI' Components : 'HDA:80862807,80860101,00100000' Controls : 21 Simple ctrls : 3 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!-------Mixer controls for card 1 [PCH] Card hw:1 'PCH'/'HDA Intel PCH at 0xf2534000 irq 45' Mixer name : 'Realtek ALC292' Components : 'HDA:10ec0292,17aa501e,00100001' Controls : 21 Simple ctrls : 9 Simple mixer control 'Master',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 87 Mono: Playback 61 [70%] [-19.50dB] [on] Simple mixer control 'Headphone',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on] Simple mixer control 'Speaker',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 87 Mono: Front Left: Playback 87 [100%] [0.00dB] [on] Front Right: Playback 87 [100%] [0.00dB] [on] Simple mixer control 'Mic',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 0 [0%] [0.00dB] Front Right: 0 [0%] [0.00dB] Simple mixer control 'Beep',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Front Left: Playback 0 [0%] [-34.50dB] [off] Front Right: Playback 0 [0%] [-34.50dB] [off] Simple mixer control 'Capture',0 Capabilities: cvolume cswitch Capture channels: Front Left - Front Right Limits: Capture 0 - 63 Front Left: Capture 39 [62%] [12.00dB] [on] Front Right: Capture 39 [62%] [12.00dB] [on] Simple mixer control 'Auto-Mute Mode',0 Capabilities: enum Items: 'Disabled' 'Enabled' Item0: 'Enabled' Simple mixer control 'Internal Mic Boost',0 Capabilities: volume Playback channels: Front Left - Front Right Capture channels: Front Left - Front Right Limits: 0 - 3 Front Left: 2 [67%] [24.00dB] Front Right: 2 [67%] [24.00dB] !!-------Mixer controls for card 2 [Q9000] Card hw:2 'Q9000'/'Logitech, Inc. QuickCam Pro 9000 at usb-0000:00:14.0-9.1, high speed' Mixer name : 'USB Mixer' Components : 'USB046d:0990' Controls : 3 Simple ctrls : 1 Simple mixer control 'Mic',0 Capabilities: cvolume cvolume-joined cswitch cswitch-joined Capture channels: Mono Limits: Capture 0 - 3072 Mono: Capture 1536 [50%] [24.00dB] [on] !!-------Mixer controls for card 29 [ThinkPadEC] Card hw:29 'ThinkPadEC'/'ThinkPad Console Audio Control at EC reg 0x30, fw unknown' Mixer name : 'ThinkPad EC (unknown)' Components : '' Controls : 1 Simple ctrls : 1 Simple mixer control 'Console',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] !!Alsactl output !!-------------- --startcollapse-- state.HDMI { control.1 { iface CARD name 'HDMI/DP,pcm=3 Jack' value false comment { access read type BOOLEAN count 1 } } control.2 { iface MIXER name 'IEC958 Playback Con Mask' value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.3 { iface MIXER name 'IEC958 Playback Pro Mask' value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.4 { iface MIXER name 'IEC958 Playback Default' value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.5 { iface MIXER name 'IEC958 Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.6 { iface PCM device 3 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.7 { iface CARD name 'HDMI/DP,pcm=7 Jack' value false comment { access read type BOOLEAN count 1 } } control.8 { iface MIXER name 'IEC958 Playback Con Mask' index 1 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.9 { iface MIXER name 'IEC958 Playback Pro Mask' index 1 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.10 { iface MIXER name 'IEC958 Playback Default' index 1 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.11 { iface MIXER name 'IEC958 Playback Switch' index 1 value true comment { access 'read write' type BOOLEAN count 1 } } control.12 { iface PCM device 7 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.13 { iface CARD name 'HDMI/DP,pcm=8 Jack' value false comment { access read type BOOLEAN count 1 } } control.14 { iface MIXER name 'IEC958 Playback Con Mask' index 2 value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.15 { iface MIXER name 'IEC958 Playback Pro Mask' index 2 value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access read type IEC958 count 1 } } control.16 { iface MIXER name 'IEC958 Playback Default' index 2 value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000' comment { access 'read write' type IEC958 count 1 } } control.17 { iface MIXER name 'IEC958 Playback Switch' index 2 value true comment { access 'read write' type BOOLEAN count 1 } } control.18 { iface PCM device 8 name ELD value '' comment { access 'read volatile' type BYTES count 0 } } control.19 { iface PCM device 3 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.20 { iface PCM device 7 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } control.21 { iface PCM device 8 name 'Playback Channel Map' value.0 0 value.1 0 value.2 0 value.3 0 value.4 0 value.5 0 value.6 0 value.7 0 comment { access 'read write' type INTEGER count 8 range '0 - 36' } } } state.PCH { control.1 { iface MIXER name 'Headphone Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.2 { iface MIXER name 'Headphone Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.3 { iface MIXER name 'Speaker Playback Volume' value.0 87 value.1 87 comment { access 'read write' type INTEGER count 2 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 0 dbvalue.1 0 } } control.4 { iface MIXER name 'Speaker Playback Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.5 { iface MIXER name 'Mic Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.6 { iface MIXER name 'Mic Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.7 { iface MIXER name 'Auto-Mute Mode' value Enabled comment { access 'read write' type ENUMERATED count 1 item.0 Disabled item.1 Enabled } } control.8 { iface MIXER name 'Capture Volume' value.0 39 value.1 39 comment { access 'read write' type INTEGER count 2 range '0 - 63' dbmin -1725 dbmax 3000 dbvalue.0 1200 dbvalue.1 1200 } } control.9 { iface MIXER name 'Capture Switch' value.0 true value.1 true comment { access 'read write' type BOOLEAN count 2 } } control.10 { iface MIXER name 'Mic Boost Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3000 dbvalue.0 0 dbvalue.1 0 } } control.11 { iface MIXER name 'Internal Mic Boost Volume' value.0 2 value.1 2 comment { access 'read write' type INTEGER count 2 range '0 - 3' dbmin 0 dbmax 3600 dbvalue.0 2400 dbvalue.1 2400 } } control.12 { iface MIXER name 'Master Playback Volume' value 61 comment { access 'read write' type INTEGER count 1 range '0 - 87' dbmin -6525 dbmax 0 dbvalue.0 -1950 } } control.13 { iface MIXER name 'Master Playback Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.14 { iface CARD name 'Mic Jack' value false comment { access read type BOOLEAN count 1 } } control.15 { iface CARD name 'Internal Mic Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.16 { iface CARD name 'Headphone Jack' value true comment { access read type BOOLEAN count 1 } } control.17 { iface CARD name 'Speaker Phantom Jack' value true comment { access read type BOOLEAN count 1 } } control.18 { iface MIXER name 'Beep Playback Volume' value.0 0 value.1 0 comment { access 'read write' type INTEGER count 2 range '0 - 31' dbmin -3450 dbmax 1200 dbvalue.0 -3450 dbvalue.1 -3450 } } control.19 { iface MIXER name 'Beep Playback Switch' value.0 false value.1 false comment { access 'read write' type BOOLEAN count 2 } } control.20 { iface PCM name 'Playback Channel Map' value.0 3 value.1 4 comment { access read type INTEGER count 2 range '0 - 36' } } control.21 { iface PCM name 'Capture Channel Map' value.0 0 value.1 0 comment { access read type INTEGER count 2 range '0 - 36' } } } state.Q9000 { control.1 { iface PCM name 'Capture Channel Map' value 0 comment { access read type INTEGER count 1 range '0 - 36' } } control.2 { iface MIXER name 'Mic Capture Switch' value true comment { access 'read write' type BOOLEAN count 1 } } control.3 { iface MIXER name 'Mic Capture Volume' value 1536 comment { access 'read write' type INTEGER count 1 range '0 - 3072' dbmin 1800 dbmax 3000 dbvalue.0 2400 } } } state.ThinkPadEC { control.1 { iface MIXER name 'Console Playback Switch' value true comment { access read type BOOLEAN count 1 } } } --endcollapse-- !!All Loaded Modules !!------------------ Module rtsx_pci_sdmmc mmc_core ctr ccm uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_dummy snd_hrtimer snd_seq snd_seq_device usb_storage nls_iso8859_1 nls_cp437 vfat fat btusb bluetooth 6lowpan_iphc snd_hda_codec_hdmi joydev iTCO_wdt mousedev iTCO_vendor_support i915 arc4 iwlmvm coretemp x86_pkg_temp_thermal intel_powerclamp drm_kms_helper mac80211 kvm_intel drm iwlwifi cfg80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel kvm microcode evdev thinkpad_acpi mac_hid nvram led_class intel_gtt hwmon serio_raw i2c_i801 i2c_algo_bit i2c_core psmouse pcspkr rtsx_pci_ms memstick tpm_tis tpm snd_hda_codec mei_me mei thermal rfkill e1000e shpchp wmi snd_hwdep snd_pcm snd_timer snd battery button soundcore video ptp lpc_ich ac pps_core processor vboxnetflt vboxnetadp pci_stub vboxpci vboxdrv ext4 crc16 mbcache jbd2 hid_generic usbhid hid dm_crypt dm_mod sr_mod sd_mod crc_t10dif cdrom crct10dif_pclmul crct10dif_common crc32_pclmul crc32c_intel ghash_clmulni_intel atkbd libps2 ahci aesni_intel libahci aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd libata ehci_pci ehci_hcd xhci_hcd scsi_mod rtsx_pci usbcore usb_common i8042 serio !!Sysfs Files !!----------- /sys/class/sound/hwC0D0/init_pin_configs: 0x05 0x18560010 0x06 0x18560010 0x07 0x18560010 /sys/class/sound/hwC0D0/driver_pin_configs: /sys/class/sound/hwC0D0/user_pin_configs: /sys/class/sound/hwC0D0/init_verbs: /sys/class/sound/hwC0D0/hints: /sys/class/sound/hwC1D0/init_pin_configs: 0x12 0x90a60130 0x13 0x40000000 0x14 0x90170110 0x15 0x0321101f 0x16 0x411111f0 0x18 0x411111f0 0x19 0x411111f0 0x1a 0x03a11020 0x1b 0x411111f0 0x1d 0x40738105 0x1e 0x411111f0 /sys/class/sound/hwC1D0/driver_pin_configs: /sys/class/sound/hwC1D0/user_pin_configs: /sys/class/sound/hwC1D0/init_verbs: /sys/class/sound/hwC1D0/hints: !!ALSA/HDA dmesg !!-------------- [ 24.883012] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10 [ 24.920888] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 24.945919] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 24.952007] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13 [ 24.952314] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12 [ 24.953189] cfg80211: Calling CRDA to update world regulatory domain -- [ 27.821545] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 27.822590] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X [ 27.870131] mousedev: PS/2 mouse device common for all mice -- [ 27.999737] Adding 8388604k swap on /dev/mapper/vg0-swap. Priority:-1 extents:1 across:8388604k FS [ 28.066542] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18 [ 28.066845] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17 [ 28.067107] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16 [ 28.360819] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off -- [ 43.023277] sd 5:0:0:1: [sdc] Attached SCSI removable disk [ 3583.280102] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 3641.367542] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) -- [32892.031210] usb_audio: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 [32892.031612] usbcore: registered new interface driver snd-usb-audio [32892.042989] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0990) -- [33399.436941] usb usb2: root hub lost power or was reset [33399.437037] snd_hda_intel 0000:00:03.0: irq 41 for MSI/MSI-X [33399.437179] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X -- [33399.437386] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [33399.439612] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [33399.439616] usb usb4: root hub lost power or was reset -- [33399.833408] eDP powered off while attempting aux channel communication. [33399.833512] Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_dummy snd_hrtimer snd_seq snd_seq_device usb_storage nls_iso8859_1 nls_cp437 vfat fat btusb bluetooth 6lowpan_iphc snd_hda_codec_hdmi joydev iTCO_wdt mousedev iTCO_vendor_support i915 arc4 iwlmvm coretemp x86_pkg_temp_thermal intel_powerclamp drm_kms_helper mac80211 kvm_intel drm iwlwifi cfg80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel kvm microcode evdev thinkpad_acpi mac_hid nvram led_class intel_gtt hwmon serio_raw i2c_i801 i2c_algo_bit i2c_core psmouse pcspkr rtsx_pci_ms memstick tpm_tis tpm snd_hda_codec mei_me mei thermal rfkill e1000e shpchp wmi snd_hwdep snd_pcm snd_timer snd battery button soundcore video ptp lpc_ich [33399.833609] ac pps_core processor vboxnetflt(O) vboxnetadp(O) pci_stub vboxpci(O) vboxdrv(O) ext4 crc16 mbcache jbd2 hid_generic usbhid hid dm_crypt dm_mod sr_mod sd_mod crc_t10dif cdrom crct10dif_pclmul crct10dif_common rtsx_pci_sdmmc crc32_pclmul crc32c_intel ghash_clmulni_intel mmc_core atkbd libps2 ahci aesni_intel libahci aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd libata ehci_pci ehci_hcd xhci_hcd scsi_mod rtsx_pci usbcore usb_common i8042 serio -- [33399.834171] eDP powered off while attempting aux channel communication. [33399.834261] Modules linked in: uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_dummy snd_hrtimer snd_seq snd_seq_device usb_storage nls_iso8859_1 nls_cp437 vfat fat btusb bluetooth 6lowpan_iphc snd_hda_codec_hdmi joydev iTCO_wdt mousedev iTCO_vendor_support i915 arc4 iwlmvm coretemp x86_pkg_temp_thermal intel_powerclamp drm_kms_helper mac80211 kvm_intel drm iwlwifi cfg80211 snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel kvm microcode evdev thinkpad_acpi mac_hid nvram led_class intel_gtt hwmon serio_raw i2c_i801 i2c_algo_bit i2c_core psmouse pcspkr rtsx_pci_ms memstick tpm_tis tpm snd_hda_codec mei_me mei thermal rfkill e1000e shpchp wmi snd_hwdep snd_pcm snd_timer snd battery button soundcore video ptp lpc_ich [33399.834316] ac pps_core processor vboxnetflt(O) vboxnetadp(O) pci_stub vboxpci(O) vboxdrv(O) ext4 crc16 mbcache jbd2 hid_generic usbhid hid dm_crypt dm_mod sr_mod sd_mod crc_t10dif cdrom crct10dif_pclmul crct10dif_common rtsx_pci_sdmmc crc32_pclmul crc32c_intel ghash_clmulni_intel mmc_core atkbd libps2 ahci aesni_intel libahci aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd libata ehci_pci ehci_hcd xhci_hcd scsi_mod rtsx_pci usbcore usb_common i8042 serio -- [33689.287384] PM: early resume of devices complete after 0.090 msecs [33689.287501] snd_hda_intel 0000:00:03.0: irq 41 for MSI/MSI-X [33689.287620] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X -- [33689.287661] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [33689.288519] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [33689.607497] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) -- [39741.199147] PM: early restore of devices complete after 0.277 msecs [39741.331890] snd_hda_intel 0000:00:03.0: irq 41 for MSI/MSI-X [39741.334458] usb usb1: root hub lost power or was reset -- [39741.335190] usb usb3: root hub lost power or was reset [39741.335279] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X [39741.335338] usb usb4: root hub lost power or was reset -- [45131.719540] usb usb2: root hub lost power or was reset [45131.719647] snd_hda_intel 0000:00:03.0: irq 41 for MSI/MSI-X [45131.719774] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X -- [45131.720005] usb usb4: root hub lost power or was reset [45131.720403] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [45131.723605] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X ---------------------------------------------------------------------->8- -- Sascha Wilde OpenPGP key: 4BB86568 http://www.intevation.de/~wilde/ http://www.intevation.de/ Intevation GmbH, Neuer Graben 17, 49074 Osnabrück; AG Osnabrück, HR B 18998 Geschäftsführer: Frank Koormann, Bernhard Reiter, Dr. Jan-Oliver Wagner

2 2

[alsa-devel] [PATCH/alsa-lib] conf/ucm: PAZ00: add Toshiba AC100/Dynabook AZ new config
by zombah 07 Oct '14

07 Oct '14

Recent mainline kernels threat Toshiba AC100 audio hardware as hw:PAZ00 vs old hw:tegraalc5632. This patch adds config files for new hw name and include them to makefiles. Signed-off-by: zombah <zombah(a)gmail.com> --- configure.ac | 1 + src/conf/ucm/Makefile.am | 2 +- src/conf/ucm/PAZ00/HiFi.conf | 45 +++++++++++++++++++++++++++++ src/conf/ucm/PAZ00/Makefile.am | 4 +++ src/conf/ucm/PAZ00/PAZ00.conf | 39 +++++++++++++++++++++++++ src/conf/ucm/PAZ00/Record.conf | 65 ++++++++++++++++++++++++++++++++++++++++++ 6 files changed, 155 insertions(+), 1 deletion(-) create mode 100644 src/conf/ucm/PAZ00/HiFi.conf create mode 100644 src/conf/ucm/PAZ00/Makefile.am create mode 100644 src/conf/ucm/PAZ00/PAZ00.conf create mode 100644 src/conf/ucm/PAZ00/Record.conf diff --git a/configure.ac b/configure.ac index b8353a0..734163c 100644 --- a/configure.ac +++ b/configure.ac @@ -653,6 +653,7 @@ AC_OUTPUT(Makefile doc/Makefile doc/pictures/Makefile doc/doxygen.cfg \ src/conf/ucm/PandaBoardES/Makefile \ src/conf/ucm/SDP4430/Makefile \ src/conf/ucm/tegraalc5632/Makefile \ + src/conf/ucm/PAZ00/Makefile \ modules/Makefile modules/mixer/Makefile modules/mixer/simple/Makefile \ alsalisp/Makefile aserver/Makefile \ test/Makefile test/lsb/Makefile \ diff --git a/src/conf/ucm/Makefile.am b/src/conf/ucm/Makefile.am index e089dde..bde89df 100644 --- a/src/conf/ucm/Makefile.am +++ b/src/conf/ucm/Makefile.am @@ -1 +1 @@ -SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 +SUBDIRS=DAISY-I2S PandaBoard PandaBoardES SDP4430 tegraalc5632 PAZ00 diff --git a/src/conf/ucm/PAZ00/HiFi.conf b/src/conf/ucm/PAZ00/HiFi.conf new file mode 100644 index 0000000..275516d --- /dev/null +++ b/src/conf/ucm/PAZ00/HiFi.conf @@ -0,0 +1,45 @@ +SectionVerb { + EnableSequence [ + cdev "hw:PAZ00" + + cset "name='Speaker Playback Switch' on" + cset "name='Int Spk Switch' on" + cset "name='Speaker Mix DAC2SPK Playback Switch' on" + ] + DisableSequence [ + cset "name='Speaker Playback Switch' off" + cset "name='Int Spk Switch' off" + cset "name='Speaker Mix DAC2SPK Playback Switch' off" + ] +} + +SectionDevice."Headset".0 { + Comment "3.5mm Headset" + + Value { + JackName "Paz00 Headset Jack" + } + + EnableSequence [ + cdev "hw:PAZ00" + + # Internal speaker + cset "name='Int Spk Switch' off" + + # Headphones + cset "name='Headphone Playback Switch' on" + cset "name='HPL Mix DACL2HP Playback Switch' on" + cset "name='HPR Mix DACR2HP Playback Switch' on" + ] + DisableSequence [ + cdev "hw:PAZ00" + + # Headphones + cset "name='Headphone Playback Switch' off" + cset "name='HPL Mix DACL2HP Playback Switch' off" + cset "name='HPR Mix DACR2HP Playback Switch' off" + + # Internal speaker + cset "name='Int Spk Switch' on" + ] +} diff --git a/src/conf/ucm/PAZ00/Makefile.am b/src/conf/ucm/PAZ00/Makefile.am new file mode 100644 index 0000000..1bf98a6 --- /dev/null +++ b/src/conf/ucm/PAZ00/Makefile.am @@ -0,0 +1,4 @@ +alsaconfigdir = @ALSA_CONFIG_DIR@ +ucmdir = $(alsaconfigdir)/ucm/PAZ00 +ucm_DATA = PAZ00.conf HiFi.conf Record.conf +EXTRA_DIST = $(ucm_DATA) diff --git a/src/conf/ucm/PAZ00/PAZ00.conf b/src/conf/ucm/PAZ00/PAZ00.conf new file mode 100644 index 0000000..8b9d904 --- /dev/null +++ b/src/conf/ucm/PAZ00/PAZ00.conf @@ -0,0 +1,39 @@ +Comment "PAZ00 alc5632" + +ValueDefaults { + PlaybackCTL "hw:0" + CaptureCTL "hw:0" +} + +SectionDefaults [ + cdev "hw:PAZ00" + + cset "name='Master Playback Switch' on" + cset "name='Master Playback Volume' 44,44" + cset "name='Headphone Playback Volume' 21,21" + cset "name='Speaker Playback Volume' 21,21" + cset "name='SpeakerOut Mux' 2" + cset "name='SpeakerOut N Mux' LN/-R" + cset "name='AB-D Amp Mux' 0" + cset "name='Left Headphone Mux' 1" + cset "name='Right Headphone Mux' 1" + cset "name='DMIC Boost Capture Volume' 4" + cset "name='Rec Capture Volume' 24" + + # Fix external mic record volumes + cset "name='Mic 1 Boost Volume' 0" + cset "name='Mic 2 Boost Volume' 0" + cset "name='Mic1 Playback Volume' 0" + cset "name='Mic2 Playback Volume' 0" + cset "name='Rec Capture Volume' 0" +] + +SectionUseCase."HiFi" { + File "HiFi.conf" + Comment "Music playback" +} + +SectionUseCase."Record" { + File "Record.conf" + Comment "Playback and capture" +} diff --git a/src/conf/ucm/PAZ00/Record.conf b/src/conf/ucm/PAZ00/Record.conf new file mode 100644 index 0000000..568e2fb --- /dev/null +++ b/src/conf/ucm/PAZ00/Record.conf @@ -0,0 +1,65 @@ +SectionVerb { + EnableSequence [ + cdev "hw:PAZ00" + + cset "name='Speaker Playback Switch' on" + cset "name='Int Spk Switch' on" + cset "name='Speaker Mix DAC2SPK Playback Switch' on" + + cset "name='DMICL Mix DMICL2ADC Capture Switch' on" + cset "name='DMIC En Capture Switch' on" + cset "name='DMIC PreFilter Capture Switch' on" + ] + DisableSequence [ + cset "name='Speaker Playback Switch' off" + cset "name='Int Spk Switch' off" + cset "name='Speaker Mix DAC2SPK Playback Switch' off" + + cset "name='DMICL Mix DMICL2ADC Capture Switch' off" + cset "name='DMIC En Capture Switch' off" + cset "name='DMIC PreFilter Capture Switch' off" + ] +} + +SectionDevice."Headset".0 { + Comment "3.5mm Headset" + + Value { + JackName "Paz00 Headset Jack" + } + + EnableSequence [ + cdev "hw:PAZ00" + + # Internal speaker + cset "name='Int Spk Switch' off" + + # Internal mic + cset "name='DMIC En Capture Switch' off" + + # Headphones + cset "name='Headphone Playback Switch' on" + cset "name='HPL Mix DACL2HP Playback Switch' on" + cset "name='HPR Mix DACR2HP Playback Switch' on" + + # External min + cset "name='Left Capture Mix MIC12REC_L Capture Switch' on" + ] + DisableSequence [ + cdev "hw:PAZ00" + + # Headphones + cset "name='Headphone Playback Switch' off" + cset "name='HPL Mix DACL2HP Playback Switch' off" + cset "name='HPR Mix DACR2HP Playback Switch' off" + + # External mic + cset "name='Left Capture Mix MIC12REC_L Capture Switch' on" + + # Internal speaker + cset "name='Int Spk Switch' on" + + # Internal mic + cset "name='DMIC En Capture Switch' on" + ] +} -- 2.0.1

2 1