October 2014 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] Issue with hda_intel on i7+Z97 chipset
by Daniel Silverstone 10 Nov '14

10 Nov '14

Hi, Firstly, I hope this is a suitable way to report this issue. I am using Debian/Wheezy on a reasonably recent i7 based system which has a Z97 motherboard chipset. In Windows, sound is perfect, but in Linux it's very crackly (direct through alsa) and if I bring pulseaudio into the mix then it reports buffer/interrupt issues on the microphone along the lines of: Oct 19 16:03:33 listless pulseaudio[3780]: [alsa-source] alsa-source.c: ALSA woke us up to read new data from the device, but there was actually nothing to read! Oct 19 16:03:33 listless pulseaudio[3780]: [alsa-source] alsa-source.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. Oct 19 16:03:33 listless pulseaudio[3780]: [alsa-source] alsa-source.c: We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. Similar messages are shown for issues with playback: user.log.2.gz:Oct 18 21:50:25 listless pulseaudio[3780]: [alsa-sink] alsa-sink.c: ALSA woke us up to write new data to the device, but there was actually nothing to write! user.log.2.gz:Oct 18 21:50:25 listless pulseaudio[3780]: [alsa-sink] alsa-sink.c: Most likely this is a bug in the ALSA driver 'snd_hda_intel'. Please report this issue to the ALSA developers. user.log.2.gz:Oct 18 21:50:25 listless pulseaudio[3780]: [alsa-sink] alsa-sink.c: We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail. In both cases, sound exhibts crackles, pops, crunches, stalls, repeats etc. I can mitigate the issue by working one or more of the CPU cores hard with bzip2 -c </dev/urandom > /dev/null Of course, this makes my system fans run harder etc, which is a bit of a pain for me, and it's only masking the issue, not solving it. For reference, my motherboard's dmi shows: Manufacturer: Gigabyte Technology Co., Ltd. Product Name: Z97-D3H-CF And the CPU reports as: Family: Core i7 Manufacturer: Intel ID: C3 06 03 00 FF FB EB BF Signature: Type 0, Family 6, Model 60, Stepping 3 Version: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz The relevant PCI devices are: 00:03.0 0403: 8086:0c0c (rev 06) Subsystem: 8086:2010 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 51 Region 0: Memory at f7834000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel and 00:1b.0 0403: 8086:8ca0 Subsystem: 1458:a182 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at f7830000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel and it's possible that this kernel message is relevant: [ 17.248493] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 17.251735] hda-intel: Invalid position buffer, using LPIB read method instead. I have tried a number of bdl_pos_adj between 1 and 32 and I have tried enable_msi=1 Neither seem to have helped significantly. I am currently running 3.12-0.bpo.1-amd64 from Debian's wheezy-backports repository. Unfortunately anything newer seems to lock up during boot and I've not managed to track down what or why as yet. I was hoping that you may have some idea of what is going on and either some suggestions for improving my situation on 3.12 or else some desire for further debug data such that a newer kernel (once I can persuade one to boot) may perform better for me. Please let me know if you require further details from me in order to address this. Regards, Daniel. -- Daniel Silverstone http://www.digital-scurf.org/ PGP mail accepted and encouraged. Key Id: 3CCE BABE 206C 3B69

1 1

[alsa-devel] [PATCH 0/5 v2] ASoC: rsnd: Add Volume Ramp support
by Kuninori Morimoto 10 Nov '14

10 Nov '14

Hi Mark These are v2 of Renesas R-Car sound Volume Ramp support. It uses "Volume Ramp Up/Down Rate" on last patch instead of "Period". Because it is good match naming, and it was difficult to calculate real period time on this HW. Kuninori Morimoto (5): ASoC: rsnd: control DVC_DVUCR under rsnd_dvc_volume_update() ASoC: rsnd: move DVC_DVUER settings under rsnd_dvc_volume_update() ASoC: rsnd: enable multiple DVC valume settings ASoC: rsnd: enable single DVC valume settings ASoC: rsnd: Add Volume Ramp support sound/soc/sh/rcar/dvc.c | 126 +++++++++++++++++++++++++++++++++++++++------- sound/soc/sh/rcar/gen.c | 3 ++ sound/soc/sh/rcar/rsnd.h | 6 +++ 3 files changed, 116 insertions(+), 19 deletions(-) Best regards --- Kuninori Morimoto

2 21

[alsa-devel] Serial MIDI driver for PL011 - as found on BCM2835 hardware
by Kim Taylor 07 Nov '14

07 Nov '14

Hi, I've written a driver for raw MIDI using the PL011. It is obviously based on the snd-serial-u16550 module, with a couple of improvements: - I've implemented a drain() callback. - I've also implemented a half duplex mode based on a timer callback which was necessary for reliable communication with my eMagic Unitor 8 hardware. (Testing with a serial link to other hardware shows that the full duplex mode is also working.) It can be found here: https://github.com/kmtaylor/rpi_patches/blob/master/serial-pl011.c If you think it should be included in the ALSA repository, please let me know what to do next. Regards, Kim

4 6

[alsa-devel] [PATCH 0/6] ASoC/ARM: move Marvell Armada 370 DB to simple-audio-card
by Thomas Petazzoni 07 Nov '14

07 Nov '14

Hello, This set of patches moves the Marvell Armada 370 DB audio complex description from a custom audio machine driver to the simple-audio-card DT binding. The first three patches are meant to go through the ASoC tree, the last three patches are meant to go through the mvebu maintainers tree. Quick description of the patches: - First patch fixes a small issue in the cs42l51 driver following its split in two parts. - Second patch makes the cs42l51 user-selectable by adding a prompt to its Kconfig option. - Third patch gets rid of the machine driver. - Fourth patch removes some now incorrect pin-muxing selection in the Armada 370 DB platform. - Fifth patch actually switches to use the simple-audio-card DT binding on Armada 370 DB. - Sixth patch updates mvebu_v7_defconfig to select the relevant options to get audio to work. Note: obviously, after PATCH 3 is applied, the audio will no longer work until PATCH 5 is applied. But since those patches will anyway go through different trees, it is a bit inevitable. And it is not dramatically important, since audio support on Armada 370 DB is already broken since the split of the CS42L51 driver. Thanks, Thomas Thomas Petazzoni (6): ASoC: cs42l51: re-add of_match_table pointer ASoC: cs42l51: make driver user-selectable ASoC: kirkwood: get rid of armada-370-db driver ARM: mvebu: remove conflicting muxing on Armada 370 DB ARM: mvebu: use simple-card DT binding for audio on Armada 370 DB ARM: mvebu: update mvebu_v7_defconfig for Armada 370 audio arch/arm/boot/dts/armada-370-db.dts | 80 +++++++++++-------- arch/arm/boot/dts/armada-370.dtsi | 1 + arch/arm/configs/mvebu_v7_defconfig | 4 +- sound/soc/codecs/Kconfig | 2 +- sound/soc/codecs/cs42l51-i2c.c | 7 ++ sound/soc/codecs/cs42l51.c | 5 -- sound/soc/kirkwood/Kconfig | 13 +--- sound/soc/kirkwood/Makefile | 4 - sound/soc/kirkwood/armada-370-db.c | 148 ------------------------------------ 9 files changed, 63 insertions(+), 201 deletions(-) delete mode 100644 sound/soc/kirkwood/armada-370-db.c -- 2.0.0

5 17

[alsa-devel] [PATCH 0/8] ASoC: rsnd: add Volume Ramp support
by Kuninori Morimoto 06 Nov '14

06 Nov '14

Hi Mark These patches add Volume Ramp support on Renesas R-Car sound driver. Kuninori Morimoto (8): ASoC: rsnd: tidyup debug information when read/write ASoC: rsnd: tidyup RSND_DVC_VOLUME_NUM to RSND_DVC_CHANNELS ASoC: rsnd: add struct rsnd_dvc_cfg and control DVC settings ASoC: rsnd: control DVC_DVUCR under rsnd_dvc_volume_update() ASoC: rsnd: move DVC_DVUER settings under rsnd_dvc_volume_update() ASoC: rsnd: enable multiple DVC valume settings ASoC: rsnd: enable single DVC valume settings ASoC: rsnd: Add Volume Ramp support sound/soc/sh/rcar/dvc.c | 155 ++++++++++++++++++++++++++++++++++------------ sound/soc/sh/rcar/gen.c | 30 ++++++--- sound/soc/sh/rcar/rsnd.h | 6 ++ 3 files changed, 145 insertions(+), 46 deletions(-) Best regards --- Kuninori Morimoto

2 24

[alsa-devel] [PATCH] ASoC: rt5677: Use specific r/w function for DSP mode
by Oder Chiou 04 Nov '14

04 Nov '14

In DSP mode, the register r/w should use the specific function to access that is invoked by address mapping of the DSP. The MX-65[1] is for switching DSP or codec mode. Signed-off-by: Oder Chiou <oder_chiou(a)realtek.com> --- sound/soc/codecs/rt5677.c | 222 ++++++++++++++++++++++++++++++---------------- sound/soc/codecs/rt5677.h | 2 + 2 files changed, 149 insertions(+), 75 deletions(-) diff --git a/sound/soc/codecs/rt5677.c b/sound/soc/codecs/rt5677.c index 413bccb..74f65ff 100644 --- a/sound/soc/codecs/rt5677.c +++ b/sound/soc/codecs/rt5677.c @@ -539,53 +539,113 @@ static bool rt5677_readable_register(struct device *dev, unsigned int reg) } } +static int rt5677_hw_read(void *context, unsigned int reg, unsigned int *val) +{ + struct i2c_client *client = context; + struct i2c_msg xfer[2]; + u8 r[1]; + u8 data[2]; + int ret; + + /* Write register */ + r[0] = reg & 0xff; + xfer[0].addr = client->addr; + xfer[0].flags = 0; + xfer[0].len = 1; + xfer[0].buf = &r[0]; + + /* Read data */ + xfer[1].addr = client->addr; + xfer[1].flags = I2C_M_RD; + xfer[1].len = 2; + xfer[1].buf = data; + + ret = i2c_transfer(client->adapter, xfer, 2); + if (ret != 2) { + dev_err(&client->dev, "i2c_transfer() returned %d\n", ret); + return -EIO; + } + + *val = (data[0] << 8) | data[1]; + + dev_dbg(&client->dev, "read %02x => %04x\n", reg, *val); + + return 0; +} + +static int rt5677_hw_write(void *context, unsigned int reg, unsigned int val) +{ + struct i2c_client *client = context; + u8 data[3]; + int ret; + + data[0] = reg & 0xff; + data[1] = (0xff00 & val) >> 8; + data[2] = val & 0xff; + + dev_dbg(&client->dev, "write %02x = %04x\n", reg, val); + + ret = i2c_master_send(client, data, 3); + if (ret == 3) + return 0; + if (ret < 0) + return ret; + else + return -EIO; +} + /** * rt5677_dsp_mode_i2c_write_addr - Write value to address on DSP mode. - * @codec: SoC audio codec device. + * @rt5677: Private Data. * @addr: Address index. * @value: Address data. * * * Returns 0 for success or negative error code. */ -static int rt5677_dsp_mode_i2c_write_addr(struct snd_soc_codec *codec, +static int rt5677_dsp_mode_i2c_write_addr(struct rt5677_priv *rt5677, unsigned int addr, unsigned int value, unsigned int opcode) { - struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *client = rt5677->i2c; int ret; mutex_lock(&rt5677->dsp_cmd_lock); - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_MSB, addr >> 16); + ret = rt5677_hw_write(client, RT5677_DSP_I2C_ADDR_MSB, addr >> 16); if (ret < 0) { - dev_err(codec->dev, "Failed to set addr msb value: %d\n", ret); + dev_err(&client->dev, "Failed to set addr msb value: %d\n", + ret); goto err; } - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_LSB, + ret = rt5677_hw_write(client, RT5677_DSP_I2C_ADDR_LSB, addr & 0xffff); if (ret < 0) { - dev_err(codec->dev, "Failed to set addr lsb value: %d\n", ret); + dev_err(&client->dev, "Failed to set addr lsb value: %d\n", + ret); goto err; } - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_DATA_MSB, + ret = rt5677_hw_write(client, RT5677_DSP_I2C_DATA_MSB, value >> 16); if (ret < 0) { - dev_err(codec->dev, "Failed to set data msb value: %d\n", ret); + dev_err(&client->dev, "Failed to set data msb value: %d\n", + ret); goto err; } - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_DATA_LSB, + ret = rt5677_hw_write(client, RT5677_DSP_I2C_DATA_LSB, value & 0xffff); if (ret < 0) { - dev_err(codec->dev, "Failed to set data lsb value: %d\n", ret); + dev_err(&client->dev, "Failed to set data lsb value: %d\n", + ret); goto err; } - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_OP_CODE, opcode); + ret = rt5677_hw_write(client, RT5677_DSP_I2C_OP_CODE, opcode); if (ret < 0) { - dev_err(codec->dev, "Failed to set op code value: %d\n", ret); + dev_err(&client->dev, "Failed to set op code value: %d\n", + ret); goto err; } @@ -597,42 +657,45 @@ err: /** * rt5677_dsp_mode_i2c_read_addr - Read value from address on DSP mode. - * @codec: SoC audio codec device. + * rt5677: Private Data. * @addr: Address index. * @value: Address data. * + * * Returns 0 for success or negative error code. */ static int rt5677_dsp_mode_i2c_read_addr( - struct snd_soc_codec *codec, unsigned int addr, unsigned int *value) + struct rt5677_priv *rt5677, unsigned int addr, unsigned int *value) { - struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); + struct i2c_client *client = rt5677->i2c; int ret; unsigned int msb, lsb; mutex_lock(&rt5677->dsp_cmd_lock); - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_MSB, addr >> 16); + ret = rt5677_hw_write(client, RT5677_DSP_I2C_ADDR_MSB, addr >> 16); if (ret < 0) { - dev_err(codec->dev, "Failed to set addr msb value: %d\n", ret); + dev_err(&client->dev, "Failed to set addr msb value: %d\n", + ret); goto err; } - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_LSB, + ret = rt5677_hw_write(client, RT5677_DSP_I2C_ADDR_LSB, addr & 0xffff); if (ret < 0) { - dev_err(codec->dev, "Failed to set addr lsb value: %d\n", ret); + dev_err(&client->dev, "Failed to set addr lsb value: %d\n", + ret); goto err; } - ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_OP_CODE , 0x0002); + ret = rt5677_hw_write(client, RT5677_DSP_I2C_OP_CODE , 0x0002); if (ret < 0) { - dev_err(codec->dev, "Failed to set op code value: %d\n", ret); + dev_err(&client->dev, "Failed to set op code value: %d\n", ret); goto err; } - regmap_read(rt5677->regmap, RT5677_DSP_I2C_DATA_MSB, &msb); - regmap_read(rt5677->regmap, RT5677_DSP_I2C_DATA_LSB, &lsb); + rt5677_hw_read(client, RT5677_DSP_I2C_DATA_MSB, &msb); + rt5677_hw_read(client, RT5677_DSP_I2C_DATA_LSB, &lsb); *value = (msb << 16) | lsb; err: @@ -643,17 +706,17 @@ err: /** * rt5677_dsp_mode_i2c_write - Write register on DSP mode. - * @codec: SoC audio codec device. + * rt5677: Private Data. * @reg: Register index. * @value: Register data. * * * Returns 0 for success or negative error code. */ -static int rt5677_dsp_mode_i2c_write(struct snd_soc_codec *codec, +static int rt5677_dsp_mode_i2c_write(struct rt5677_priv *rt5677, unsigned int reg, unsigned int value) { - return rt5677_dsp_mode_i2c_write_addr(codec, 0x18020000 + reg * 2, + return rt5677_dsp_mode_i2c_write_addr(rt5677, 0x18020000 + reg * 2, value, 0x0001); } @@ -661,57 +724,33 @@ static int rt5677_dsp_mode_i2c_write(struct snd_soc_codec *codec, * rt5677_dsp_mode_i2c_read - Read register on DSP mode. * @codec: SoC audio codec device. * @reg: Register index. + * @value: Register data. * * - * Returns Register value. + * Returns 0 for success or negative error code. */ -static unsigned int rt5677_dsp_mode_i2c_read( - struct snd_soc_codec *codec, unsigned int reg) +static int rt5677_dsp_mode_i2c_read( + struct rt5677_priv *rt5677, unsigned int reg, unsigned int *value) { - unsigned int value = 0; + int ret = rt5677_dsp_mode_i2c_read_addr(rt5677, 0x18020000 + reg * 2, + value); - rt5677_dsp_mode_i2c_read_addr(codec, 0x18020000 + reg * 2, &value); + *value &= 0xffff; - return value; + return ret; } -/** - * rt5677_dsp_mode_i2c_update_bits - update register on DSP mode. - * @codec: audio codec - * @reg: register index. - * @mask: register mask - * @value: new value - * - * - * Returns 1 for change, 0 for no change, or negative error code. - */ -static int rt5677_dsp_mode_i2c_update_bits(struct snd_soc_codec *codec, - unsigned int reg, unsigned int mask, unsigned int value) +static void rt5677_set_dsp_mode(struct snd_soc_codec *codec, bool on) { - unsigned int old, new; - int change, ret; - - ret = rt5677_dsp_mode_i2c_read(codec, reg); - if (ret < 0) { - dev_err(codec->dev, "Failed to read reg: %d\n", ret); - goto err; - } + struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec); - old = ret; - new = (old & ~mask) | (value & mask); - change = old != new; - if (change) { - ret = rt5677_dsp_mode_i2c_write(codec, reg, new); - if (ret < 0) { - dev_err(codec->dev, - "Failed to write reg: %d\n", ret); - goto err; - } + if (on) { + regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1, 0x2, 0x2); + rt5677->is_dsp_mode = true; + } else { + regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1, 0x2, 0x0); + rt5677->is_dsp_mode = false; } - return change; - -err: - return ret; } static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on) @@ -733,9 +772,14 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on) RT5677_LDO1_SEL_MASK, 0x0); regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG2, RT5677_PWR_LDO1, RT5677_PWR_LDO1); - regmap_write(rt5677->regmap, RT5677_GLB_CLK2, 0x0080); + regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK1, + RT5677_MCLK_SRC_MASK, RT5677_MCLK2_SRC); + regmap_update_bits(rt5677->regmap, RT5677_GLB_CLK2, + RT5677_PLL2_PR_SRC_MASK | RT5677_DSP_CLK_SRC_MASK, + RT5677_PLL2_PR_SRC_MCLK2 | RT5677_DSP_CLK_SRC_BYPASS); regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x07ff); - regmap_write(rt5677->regmap, RT5677_PWR_DSP1, 0x07ff); + regmap_write(rt5677->regmap, RT5677_PWR_DSP1, 0x07fd); + rt5677_set_dsp_mode(codec, true); ret = request_firmware(&rt5677->fw1, RT5677_FIRMWARE1, codec->dev); @@ -751,8 +795,7 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on) release_firmware(rt5677->fw2); } - rt5677_dsp_mode_i2c_update_bits(codec, RT5677_PWR_DSP1, 0x1, - 0x0); + regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1, 0x1, 0x0); regcache_cache_bypass(rt5677->regmap, false); regcache_cache_only(rt5677->regmap, true); @@ -762,9 +805,9 @@ static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on) regcache_cache_only(rt5677->regmap, false); regcache_cache_bypass(rt5677->regmap, true); - rt5677_dsp_mode_i2c_update_bits(codec, RT5677_PWR_DSP1, 0x1, - 0x1); - rt5677_dsp_mode_i2c_write(codec, RT5677_PWR_DSP1, 0x0001); + regmap_update_bits(rt5677->regmap, RT5677_PWR_DSP1, 0x1, 0x1); + rt5677_set_dsp_mode(codec, false); + regmap_write(rt5677->regmap, RT5677_PWR_DSP1, 0x0001); regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec); @@ -3804,6 +3847,32 @@ static int rt5677_resume(struct snd_soc_codec *codec) #define rt5677_resume NULL #endif +static int rt5677_read(void *context, unsigned int reg, unsigned int *val) +{ + struct i2c_client *client = context; + struct rt5677_priv *rt5677 = i2c_get_clientdata(client); + + if (rt5677->is_dsp_mode) + rt5677_dsp_mode_i2c_read(rt5677, reg, val); + else + rt5677_hw_read(context, reg, val); + + return 0; +} + +static int rt5677_write(void *context, unsigned int reg, unsigned int val) +{ + struct i2c_client *client = context; + struct rt5677_priv *rt5677 = i2c_get_clientdata(client); + + if (rt5677->is_dsp_mode) + rt5677_dsp_mode_i2c_write(rt5677, reg, val); + else + rt5677_hw_write(context, reg, val); + + return 0; +} + #define RT5677_STEREO_RATES SNDRV_PCM_RATE_8000_96000 #define RT5677_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \ SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8) @@ -3938,6 +4007,8 @@ static const struct regmap_config rt5677_regmap = { .volatile_reg = rt5677_volatile_register, .readable_reg = rt5677_readable_register, + .reg_read = rt5677_read, + .reg_write = rt5677_write, .cache_type = REGCACHE_RBTREE, .reg_defaults = rt5677_reg, @@ -4063,6 +4134,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, return -ENOMEM; i2c_set_clientdata(i2c, rt5677); + rt5677->i2c = i2c; if (pdata) rt5677->pdata = *pdata; @@ -4094,7 +4166,7 @@ static int rt5677_i2c_probe(struct i2c_client *i2c, msleep(10); } - rt5677->regmap = devm_regmap_init_i2c(i2c, &rt5677_regmap); + rt5677->regmap = devm_regmap_init(&i2c->dev, NULL, i2c, &rt5677_regmap); if (IS_ERR(rt5677->regmap)) { ret = PTR_ERR(rt5677->regmap); dev_err(&i2c->dev, "Failed to allocate register map: %d\n", diff --git a/sound/soc/codecs/rt5677.h b/sound/soc/codecs/rt5677.h index d2c743c..ab81659f 100644 --- a/sound/soc/codecs/rt5677.h +++ b/sound/soc/codecs/rt5677.h @@ -1599,6 +1599,7 @@ struct rt5677_priv { struct regmap *regmap; const struct firmware *fw1, *fw2; struct mutex dsp_cmd_lock; + struct i2c_client *i2c; int sysclk; int sysclk_src; @@ -1614,6 +1615,7 @@ struct rt5677_priv { #endif bool dsp_vad_en; struct regmap_irq_chip_data *irq_data; + bool is_dsp_mode; }; #endif /* __RT5677_H__ */ -- 1.8.1.1.439.g50a6b54

2 5

[alsa-devel] [PATCH v6] ASoC: dapm: add code to configure dai link parameters
by Nikesh Oswal 04 Nov '14

04 Nov '14

dai-link params for codec-codec links were fixed. The fixed link between codec and another chip which may be another codec, baseband, bluetooth codec etc may require run time configuaration changes. This change provides an optional alsa control to select one of the params from a list of params. Signed-off-by: Nikesh Oswal <nikesh(a)opensource.wolfsonmicro.com> --- include/sound/soc-dapm.h | 3 + include/sound/soc.h | 1 + sound/soc/soc-core.c | 6 +- sound/soc/soc-dapm.c | 143 ++++++++++++++++++++++++++++++++++++++++++++-- 4 files changed, 146 insertions(+), 7 deletions(-) diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 6b59471..3ee031e 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -378,6 +378,7 @@ int snd_soc_dapm_link_dai_widgets(struct snd_soc_card *card); void snd_soc_dapm_connect_dai_link_widgets(struct snd_soc_card *card); int snd_soc_dapm_new_pcm(struct snd_soc_card *card, const struct snd_soc_pcm_stream *params, + unsigned int num_params, struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink); @@ -531,6 +532,8 @@ struct snd_soc_dapm_widget { void *priv; /* widget specific data */ struct regulator *regulator; /* attached regulator */ const struct snd_soc_pcm_stream *params; /* params for dai links */ + unsigned int num_params; /* number of params for dai links */ + unsigned int params_select; /* currently selected param for dai link */ /* dapm control */ int reg; /* negative reg = no direct dapm */ diff --git a/include/sound/soc.h b/include/sound/soc.h index ed9e2d7..51c6c4f 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -906,6 +906,7 @@ struct snd_soc_dai_link { int be_id; /* optional ID for machine driver BE identification */ const struct snd_soc_pcm_stream *params; + unsigned int num_params; unsigned int dai_fmt; /* format to set on init */ diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index b87d7d8..1db2168 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1461,7 +1461,8 @@ static int soc_link_dai_widgets(struct snd_soc_card *card, capture_w = cpu_dai->capture_widget; if (play_w && capture_w) { ret = snd_soc_dapm_new_pcm(card, dai_link->params, - capture_w, play_w); + dai_link->num_params, capture_w, + play_w); if (ret != 0) { dev_err(card->dev, "ASoC: Can't link %s to %s: %d\n", play_w->name, capture_w->name, ret); @@ -1473,7 +1474,8 @@ static int soc_link_dai_widgets(struct snd_soc_card *card, capture_w = codec_dai->capture_widget; if (play_w && capture_w) { ret = snd_soc_dapm_new_pcm(card, dai_link->params, - capture_w, play_w); + dai_link->num_params, capture_w, + play_w); if (ret != 0) { dev_err(card->dev, "ASoC: Can't link %s to %s: %d\n", play_w->name, capture_w->name, ret); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index cdc837e..68f6057 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -729,6 +729,36 @@ static int dapm_new_pga(struct snd_soc_dapm_widget *w) return 0; } +/* create new dapm dai link control */ +static int dapm_new_dai_link(struct snd_soc_dapm_widget *w) +{ + int i, ret; + struct snd_kcontrol *kcontrol; + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_card *card = dapm->card->snd_card; + + /* skip control creation for links with 1 config */ + if (w->num_params == 1) + return 0; + + /* add kcontrol */ + for (i = 0; i < w->num_kcontrols; i++) { + kcontrol = snd_soc_cnew(&w->kcontrol_news[i], w, + w->name, NULL); + ret = snd_ctl_add(card, kcontrol); + if (ret < 0) { + dev_err(dapm->dev, + "ASoC: failed to add widget %s dapm kcontrol %s: %d\n", + w->name, w->kcontrol_news[i].name, ret); + return ret; + } + kcontrol->private_data = w; + w->kcontrols[i] = kcontrol; + } + + return 0; +} + /* reset 'walked' bit for each dapm path */ static void dapm_clear_walk_output(struct snd_soc_dapm_context *dapm, struct list_head *sink) @@ -2664,6 +2694,9 @@ int snd_soc_dapm_new_widgets(struct snd_soc_card *card) case snd_soc_dapm_out_drv: dapm_new_pga(w); break; + case snd_soc_dapm_dai_link: + dapm_new_dai_link(w); + break; default: break; } @@ -3142,6 +3175,9 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, source = source_p->source->priv; sink = sink_p->sink->priv; + /* Select the configuration set by alsa control */ + config += w->params_select; + /* Be a little careful as we don't want to overflow the mask array */ if (config->formats) { fmt = ffs(config->formats) - 1; @@ -3222,8 +3258,35 @@ out: return ret; } +static int snd_soc_dapm_dai_link_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_widget *w = snd_kcontrol_chip(kcontrol); + + ucontrol->value.integer.value[0] = w->params_select; + + return 0; +} + +static int snd_soc_dapm_dai_link_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_dapm_widget *w = snd_kcontrol_chip(kcontrol); + + if (ucontrol->value.integer.value[0] == w->params_select) + return 0; + + if (ucontrol->value.integer.value[0] >= w->num_params) + return -EINVAL; + + w->params_select = ucontrol->value.integer.value[0]; + + return 0; +} + int snd_soc_dapm_new_pcm(struct snd_soc_card *card, const struct snd_soc_pcm_stream *params, + unsigned int num_params, struct snd_soc_dapm_widget *source, struct snd_soc_dapm_widget *sink) { @@ -3231,14 +3294,48 @@ int snd_soc_dapm_new_pcm(struct snd_soc_card *card, struct snd_soc_dapm_widget *w; size_t len; char *link_name; - int ret; + int ret, count; + unsigned long private_value; + const char **w_param_text; + struct soc_enum w_param_enum[] = { + SOC_ENUM_SINGLE(0, 0, 0, NULL), + }; + struct snd_kcontrol_new kcontrol_dai_link[] = { + SOC_ENUM_EXT(NULL, w_param_enum[0], + snd_soc_dapm_dai_link_get, + snd_soc_dapm_dai_link_put), + }; + const struct snd_soc_pcm_stream *config = params; + + w_param_text = kcalloc(num_params, sizeof(char *), GFP_KERNEL); + if (!w_param_text) + return -ENOMEM; len = strlen(source->name) + strlen(sink->name) + 2; link_name = devm_kzalloc(card->dev, len, GFP_KERNEL); - if (!link_name) - return -ENOMEM; + if (!link_name) { + ret = -ENOMEM; + goto outfree_w_param; + } + snprintf(link_name, len, "%s-%s", source->name, sink->name); + for (count = 0 ; count < num_params; count++) { + if (!config->stream_name) + dev_warn(card->dapm.dev, + "ASoC: anonymous config %d for dai link %s\n", + count, link_name); + w_param_text[count] = kmemdup((void *)(config->stream_name), + strlen(config->stream_name) + 1, GFP_KERNEL); + if (!w_param_text[count]) { + ret = -ENOMEM; + goto outfree_link_name; + } + config++; + } + w_param_enum[0].items = num_params; + w_param_enum[0].texts = w_param_text; + memset(&template, 0, sizeof(template)); template.reg = SND_SOC_NOPM; template.id = snd_soc_dapm_dai_link; @@ -3246,6 +3343,25 @@ int snd_soc_dapm_new_pcm(struct snd_soc_card *card, template.event = snd_soc_dai_link_event; template.event_flags = SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD; + template.num_kcontrols = 1; + private_value = + (unsigned long) kmemdup((void *)(kcontrol_dai_link[0].private_value), + sizeof(struct soc_enum), GFP_KERNEL); + if (!private_value) { + dev_err(card->dev, "ASoC: Failed to create control for %s widget\n", + link_name); + ret = -ENOMEM; + goto outfree_link_name; + } + kcontrol_dai_link[0].private_value = private_value; + template.kcontrol_news = kmemdup(&kcontrol_dai_link[0], + sizeof(struct snd_kcontrol_new), GFP_KERNEL); + if (!template.kcontrol_news) { + dev_err(card->dev, "ASoC: Failed to create control for %s widget\n", + link_name); + ret = -ENOMEM; + goto outfree_private_value; + } dev_dbg(card->dev, "ASoC: adding %s widget\n", link_name); @@ -3253,15 +3369,32 @@ int snd_soc_dapm_new_pcm(struct snd_soc_card *card, if (!w) { dev_err(card->dev, "ASoC: Failed to create %s widget\n", link_name); - return -ENOMEM; + ret = -ENOMEM; + goto outfree_kcontrol_news; } w->params = params; + w->num_params = num_params; ret = snd_soc_dapm_add_path(&card->dapm, source, w, NULL, NULL); if (ret) - return ret; + goto outfree_w; return snd_soc_dapm_add_path(&card->dapm, w, sink, NULL, NULL); + +outfree_w: + kfree(w); +outfree_kcontrol_news: + kfree(template.kcontrol_news); +outfree_private_value: + kfree((void *)private_value); +outfree_link_name: + kfree(link_name); +outfree_w_param: + for (count = 0 ; count < num_params; count++) + kfree(w_param_text[count]); + kfree(w_param_text); + + return ret; } int snd_soc_dapm_new_dai_widgets(struct snd_soc_dapm_context *dapm, -- 1.7.9.5

2 1

[alsa-devel] [PATCH v5 0/3] Add Phytec pbab01 audio support
by Dmitry Lavnikevich 04 Nov '14

04 Nov '14

By mistake previous patchset versions was sent as in-reply-to to previous patchset versions, so they may have been lost among other mails. One of pathces was already applied by Mark Brown, here is 3 patches implementing audio support on Phytec phyFLEX-i.MX6 boards. This patchset version only renames audio card name to OnboardTLV320AIC3007 (on request from Phytec). Patches are based on branch for-next of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git

3 6

[alsa-devel] [PATCH] ASoC: rt286: reduce power consumption
by bardliao＠realtek.com 04 Nov '14

04 Nov '14

From: Bard Liao <bardliao(a)realtek.com> This patch will optimize the power consumption of rt286. Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- sound/soc/codecs/rt286.c | 211 ++++++++++++++++++++++++++++++++++------------- 1 file changed, 155 insertions(+), 56 deletions(-) diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c index 4aa555c..97daa80 100644 --- a/sound/soc/codecs/rt286.c +++ b/sound/soc/codecs/rt286.c @@ -36,11 +36,13 @@ struct rt286_priv { struct regmap *regmap; + struct snd_soc_codec *codec; struct rt286_platform_data pdata; struct i2c_client *i2c; struct snd_soc_jack *jack; struct delayed_work jack_detect_work; int sys_clk; + int clk_id; struct reg_default *index_cache; }; @@ -298,7 +300,6 @@ static int rt286_support_power_controls[] = { static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) { unsigned int val, buf; - int i; *hp = false; *mic = false; @@ -309,67 +310,44 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) if (*hp) { /* power on HV,VERF */ regmap_update_bits(rt286->regmap, - RT286_POWER_CTRL1, 0x1001, 0x0); + RT286_DC_GAIN, 0x200, 0x200); + + snd_soc_dapm_force_enable_pin(&rt286->codec->dapm, + "HV"); + snd_soc_dapm_force_enable_pin(&rt286->codec->dapm, + "VREF"); /* power LDO1 */ - regmap_update_bits(rt286->regmap, - RT286_POWER_CTRL2, 0x4, 0x4); - regmap_write(rt286->regmap, RT286_SET_MIC1, 0x24); - regmap_read(rt286->regmap, RT286_CBJ_CTRL2, &val); + snd_soc_dapm_force_enable_pin(&rt286->codec->dapm, + "LDO1"); + snd_soc_dapm_sync(&rt286->codec->dapm); - msleep(200); - i = 40; - while (((val & 0x0800) == 0) && (i > 0)) { - regmap_read(rt286->regmap, - RT286_CBJ_CTRL2, &val); - i--; - msleep(20); - } + regmap_write(rt286->regmap, RT286_SET_MIC1, 0x24); + msleep(50); - if (0x0400 == (val & 0x0700)) { - *mic = false; + regmap_update_bits(rt286->regmap, + RT286_CBJ_CTRL1, 0xfcc0, 0xd400); + msleep(300); + regmap_read(rt286->regmap, RT286_CBJ_CTRL2, &val); - regmap_write(rt286->regmap, - RT286_SET_MIC1, 0x20); - /* power off HV,VERF */ - regmap_update_bits(rt286->regmap, - RT286_POWER_CTRL1, 0x1001, 0x1001); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL3, 0xc000, 0x0000); - regmap_update_bits(rt286->regmap, - RT286_CBJ_CTRL1, 0x0030, 0x0000); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL2, 0xc000, 0x0000); - } else if ((0x0200 == (val & 0x0700)) || - (0x0100 == (val & 0x0700))) { + if (0x0070 == (val & 0x0070)) { *mic = true; - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL3, 0xc000, 0x8000); - regmap_update_bits(rt286->regmap, - RT286_CBJ_CTRL1, 0x0030, 0x0020); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL2, 0xc000, 0x8000); } else { - *mic = false; + regmap_update_bits(rt286->regmap, + RT286_CBJ_CTRL1, 0xfcc0, 0xe400); + msleep(300); + regmap_read(rt286->regmap, + RT286_CBJ_CTRL2, &val); + if (0x0070 == (val & 0x0070)) + *mic = true; + else + *mic = false; } - - regmap_update_bits(rt286->regmap, - RT286_MISC_CTRL1, - 0x0060, 0x0000); - } else { - regmap_update_bits(rt286->regmap, - RT286_MISC_CTRL1, - 0x0060, 0x0020); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL3, - 0xc000, 0x8000); regmap_update_bits(rt286->regmap, - RT286_CBJ_CTRL1, - 0x0030, 0x0020); - regmap_update_bits(rt286->regmap, - RT286_A_BIAS_CTRL2, - 0xc000, 0x8000); + RT286_DC_GAIN, 0x200, 0x0); + } else { *mic = false; + regmap_write(rt286->regmap, RT286_SET_MIC1, 0x20); } } else { regmap_read(rt286->regmap, RT286_GET_HP_SENSE, &buf); @@ -378,6 +356,12 @@ static int rt286_jack_detect(struct rt286_priv *rt286, bool *hp, bool *mic) *mic = buf & 0x80000000; } + snd_soc_dapm_disable_pin(&rt286->codec->dapm, "HV"); + snd_soc_dapm_disable_pin(&rt286->codec->dapm, "VREF"); + if (!*hp) + snd_soc_dapm_disable_pin(&rt286->codec->dapm, "LDO1"); + snd_soc_dapm_sync(&rt286->codec->dapm); + return 0; } @@ -415,6 +399,17 @@ int rt286_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) } EXPORT_SYMBOL_GPL(rt286_mic_detect); +static int is_mclk_mode(struct snd_soc_dapm_widget *source, + struct snd_soc_dapm_widget *sink) +{ + struct rt286_priv *rt286 = snd_soc_codec_get_drvdata(source->codec); + + if (rt286->clk_id == RT286_SCLK_S_MCLK) + return 1; + else + return 0; +} + static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -6350, 50, 0); static const DECLARE_TLV_DB_SCALE(mic_vol_tlv, 0, 1000, 0); @@ -568,7 +563,84 @@ static int rt286_adc_event(struct snd_soc_dapm_widget *w, return 0; } +static int rt286_vref_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, + RT286_CBJ_CTRL1, 0x0400, 0x0000); + mdelay(50); + break; + default: + return 0; + } + + return 0; +} + +static int rt286_ldo2_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + snd_soc_update_bits(codec, RT286_POWER_CTRL2, 0x38, 0x08); + break; + case SND_SOC_DAPM_PRE_PMD: + snd_soc_update_bits(codec, RT286_POWER_CTRL2, 0x38, 0x30); + break; + default: + return 0; + } + + return 0; +} + +static int rt286_mic1_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL3, 0xc000, 0x8000); + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL2, 0xc000, 0x8000); + break; + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL3, 0xc000, 0x0000); + snd_soc_update_bits(codec, + RT286_A_BIAS_CTRL2, 0xc000, 0x0000); + break; + default: + return 0; + } + + return 0; +} + static const struct snd_soc_dapm_widget rt286_dapm_widgets[] = { + SND_SOC_DAPM_SUPPLY_S("HV", 1, RT286_POWER_CTRL1, + 12, 1, NULL, 0), + SND_SOC_DAPM_SUPPLY("VREF", RT286_POWER_CTRL1, + 0, 1, rt286_vref_event, SND_SOC_DAPM_PRE_PMU), + SND_SOC_DAPM_SUPPLY_S("LDO1", 1, RT286_POWER_CTRL2, + 2, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY_S("LDO2", 2, RT286_POWER_CTRL1, + 13, 1, rt286_ldo2_event, SND_SOC_DAPM_PRE_PMD | + SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_SUPPLY("MCLK MODE", RT286_PLL_CTRL1, + 5, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("MIC1 Input Buffer", SND_SOC_NOPM, + 0, 0, rt286_mic1_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + /* Input Lines */ SND_SOC_DAPM_INPUT("DMIC1 Pin"), SND_SOC_DAPM_INPUT("DMIC2 Pin"), @@ -642,6 +714,25 @@ static const struct snd_soc_dapm_widget rt286_dapm_widgets[] = { }; static const struct snd_soc_dapm_route rt286_dapm_routes[] = { + {"ADC 0", NULL, "MCLK MODE", is_mclk_mode}, + {"ADC 1", NULL, "MCLK MODE", is_mclk_mode}, + {"Front", NULL, "MCLK MODE", is_mclk_mode}, + {"Surround", NULL, "MCLK MODE", is_mclk_mode}, + + {"HP Power", NULL, "LDO1"}, + {"HP Power", NULL, "LDO2"}, + + {"MIC1", NULL, "LDO1"}, + {"MIC1", NULL, "LDO2"}, + {"MIC1", NULL, "HV"}, + {"MIC1", NULL, "VREF"}, + {"MIC1", NULL, "MIC1 Input Buffer"}, + + {"SPO", NULL, "LDO1"}, + {"SPO", NULL, "LDO2"}, + {"SPO", NULL, "HV"}, + {"SPO", NULL, "VREF"}, + {"DMIC1", NULL, "DMIC1 Pin"}, {"DMIC2", NULL, "DMIC2 Pin"}, {"DMIC1", NULL, "DMIC Receiver"}, @@ -880,6 +971,7 @@ static int rt286_set_dai_sysclk(struct snd_soc_dai *dai, } rt286->sys_clk = freq; + rt286->clk_id = clk_id; return 0; } @@ -915,13 +1007,18 @@ static int rt286_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_ON: mdelay(10); + snd_soc_update_bits(codec, + RT286_CBJ_CTRL1, 0x0400, 0x0400); + snd_soc_update_bits(codec, + RT286_DC_GAIN, 0x200, 0x0); + break; case SND_SOC_BIAS_STANDBY: snd_soc_write(codec, RT286_SET_AUDIO_POWER, AC_PWRST_D3); snd_soc_update_bits(codec, - RT286_DC_GAIN, 0x200, 0x0); + RT286_CBJ_CTRL1, 0x0400, 0x0000); break; default: @@ -962,6 +1059,7 @@ static int rt286_probe(struct snd_soc_codec *codec) { struct rt286_priv *rt286 = snd_soc_codec_get_drvdata(codec); + rt286->codec = codec; codec->dapm.bias_level = SND_SOC_BIAS_OFF; if (rt286->i2c->irq) { @@ -1152,7 +1250,6 @@ static int rt286_i2c_probe(struct i2c_client *i2c, if (!rt286->pdata.cbj_en) { regmap_write(rt286->regmap, RT286_CBJ_CTRL2, 0x0000); regmap_write(rt286->regmap, RT286_MIC1_DET_CTRL, 0x0816); - regmap_write(rt286->regmap, RT286_MISC_CTRL1, 0x0000); regmap_update_bits(rt286->regmap, RT286_CBJ_CTRL1, 0xf000, 0xb000); } else { @@ -1169,8 +1266,10 @@ static int rt286_i2c_probe(struct i2c_client *i2c, mdelay(10); - /*Power down LDO2*/ - regmap_update_bits(rt286->regmap, RT286_POWER_CTRL2, 0x8, 0x0); + regmap_write(rt286->regmap, RT286_MISC_CTRL1, 0x0000); + /*Power down LDO, VREF*/ + regmap_update_bits(rt286->regmap, RT286_POWER_CTRL2, 0xc, 0x0); + regmap_update_bits(rt286->regmap, RT286_POWER_CTRL1, 0x1001, 0x1001); /*Set depop parameter*/ regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL2, 0x403a, 0x401a); -- 1.8.1.1.439.g50a6b54

3 3

[alsa-devel] [PATCHv4] ASoC: simple-card: binding: update binding to support the new style.
by Xiubo Li 04 Nov '14

04 Nov '14

This patch will split the DT binding into old style and new style, the new style will be easier to add many DAI links from old single DAI link DTs. This patch will maintian compatibility with the old DTs. Signed-off-by: Xiubo Li <Li.Xiubo(a)freescale.com> --- Changes in v4: - Follow Jyri's advice. - Fix some small words or sentences errors. - Fix discription of the commit commnet. - Apply against the current code. - Add Notes. .../devicetree/bindings/sound/simple-card.txt | 215 ++++++++++++++------- 1 file changed, 148 insertions(+), 67 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt index c2e9841..5fe0796 100644 --- a/Documentation/devicetree/bindings/sound/simple-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-card.txt @@ -1,15 +1,19 @@ -Simple-Card: +Device-Tree bindings for Simple Card Simple-Card specifies audio DAI connections of SoC <-> codec. -Required properties: +=== Top level's properties and subnodes === +*** Required properties *** - compatible : "simple-audio-card" -Optional properties: - +*** Optional properties *** - simple-audio-card,name : User specified audio sound card name, one string property. +- simple-audio-card,format : CPU/CODEC common audio format. + "i2s", "right_j", "left_j" , "dsp_a" + "dsp_b", "ac97", "pdm", "msb", "lsb" + (This is used for single DAI link & old style.) - simple-audio-card,widgets : Please refer to widgets.txt. - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the @@ -17,63 +21,99 @@ Optional properties: source. - simple-audio-card,mclk-fs : Multiplication factor between stream rate and codec mclk. - -Optional subnodes: - -- simple-audio-card,dai-link : Container for dai-link level - properties and the CPU and CODEC - sub-nodes. This container may be - omitted when the card has only one - DAI link. See the examples and the - section bellow. - -Dai-link subnode properties and subnodes: - -If dai-link subnode is omitted and the subnode properties are directly -under "sound"-node the subnode property and subnode names have to be -prefixed with "simple-audio-card,"-prefix. - -Required dai-link subnodes: - -- cpu : CPU sub-node -- codec : CODEC sub-node - -Optional dai-link subnode properties: - +- simple-audio-card,frame-master : Indicates DAI link frame master. One phandle to a + CODEC DAI node. + (This is used for single DAI link & old style.) +- simple-audio-card,bitclock-master : Indicates DAI link bit clock master. One phandle to + a CODEC DAI node. + (This is used for single DAI link & old style.) + +*** Optional subnodes *** +- simple-audio-card,dai-link : Container for DAI link level properties and the CPU + and CODEC nodes. This container may be omitted + when the card has only one DAI link and using the old + style. See the examples and the section bellow. +- simple-audio-card,cpu : CPU DAI node. + (This is used for single DAI link & old style.) +- simple-audio-card,codec : CODEC DAI node. + (This is used for single DAI link & old style.) + +=== DAI link node's properties and its subnodes === + +*** Required subnodes *** +- cpu : CPU DAI node. +- codec : CODEC DAI node. + +*** Optional properties *** - format : CPU/CODEC common audio format. "i2s", "right_j", "left_j" , "dsp_a" "dsp_b", "ac97", "pdm", "msb", "lsb" -- frame-master : Indicates dai-link frame master. - phandle to a cpu or codec subnode. -- bitclock-master : Indicates dai-link bit clock master. - phandle to a cpu or codec subnode. -- bitclock-inversion : bool property. Add this if the - dai-link uses bit clock inversion. -- frame-inversion : bool property. Add this if the - dai-link uses frame clock inversion. - -For backward compatibility the frame-master and bitclock-master -properties can be used as booleans in codec subnode to indicate if the -codec is the dai-link frame or bit clock master. In this case there -should be no dai-link node, the same properties should not be present -at sound-node level, and the bitclock-inversion and frame-inversion -properties should also be placed in the codec node if needed. - -Required CPU/CODEC subnodes properties: - -- sound-dai : phandle and port of CPU/CODEC - -Optional CPU/CODEC subnodes properties: - +- frame-master : Indicates DAI link frame master. One phandle to a + CODEC DAI node. + (This is One boolean property for old style.) +- bitclock-master : Indicates DAI link bit clock master. One phandle to + a CODEC DAI node. + (This is one boolean property for old style.) + +For backward compatibility, the frame-master and bitclock-master +can be used as boolean properties in CPU/CODEC DAI node indicating +that the CODEC DAI is the DAI link frame master and bit clock master. +In this case there should be no DAI link level nodes or boolean +properties of them. + +For all the properties in DAI link level will be applied to both +CPU and CODEC DAIs. + +=== CPU/CODEC DAI node's properties and its subnodes === + +*** Required properties *** +- sound-dai : One phandle and port of CPU/CODEC DAI device node. + +*** Optional properties *** +- bitclock-inversion : Boolean property. Add this if the DAI device uses bit + clock inversion. +- frame-inversion : Boolean property. Add this if the DAI device uses frame + clock inversion. +- frame-master : Boolean property. Add this if the CODEC DAI device is + frame master. + (This is used for single DAI link & old style.) +- bitclock-master : Boolean property. Add this if the CODEC DAI device is + bit clock master. + (This is used for single DAI link & old style.) - dai-tdm-slot-num : Please refer to tdm-slot.txt. - dai-tdm-slot-width : Please refer to tdm-slot.txt. -- clocks / system-clock-frequency : specify subnode's clock if needed. - it can be specified via "clocks" if system has - clock node (= common clock), or "system-clock-frequency" - (if system doens't support common clock) +- clocks / system-clock-frequency : Specify CPU/CODEC DAI's clock if needed. It can + be specified via "clocks" if system has clock node + (= common clock), or "system-clock-frequency"(if system + doens't support common clock) + +=== Notes === +*** DAI hardware clock masters *** +For [prefix]frame-master and [prefix]bitclock-master, which prefix +is "simple-audio-card,", are both wrt the CODEC DAI. If the CODEC DAI +is bit clock and frame master then the CPU DAI will be bit clock and +frame slave, and vice versa. + +=== Examples === +*** CPU & CODEC DAI DT nodes *** +&i2c0 { + ak4648: ak4648@12 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + }; +}; -Example 1 - single DAI link: +sh_fsi2: sh_fsi2@ec230000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; +}; +Example 1 - single DAI link & old style: +bitclock-master and frame-master as phandles. sound { compatible = "simple-audio-card"; simple-audio-card,name = "VF610-Tower-Sound-Card"; @@ -91,6 +131,7 @@ sound { simple-audio-card,cpu { sound-dai = <&sh_fsi2 0>; + bitclock-inversion; }; dailink0_master: simple-audio-card,codec { @@ -99,24 +140,64 @@ sound { }; }; -&i2c0 { - ak4648: ak4648@12 { - #sound-dai-cells = <0>; - compatible = "asahi-kasei,ak4648"; - reg = <0x12>; +Example 2 - single DAI link & old style: +bitclock-master and frame-master as boolean properties. +sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "VF610-Tower-Sound-Card"; + simple-audio-card,format = "left_j"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; }; -}; -sh_fsi2: sh_fsi2@ec230000 { - #sound-dai-cells = <1>; - compatible = "renesas,sh_fsi2"; - reg = <0xec230000 0x400>; - interrupt-parent = <&gic>; - interrupts = <0 146 0x4>; + simple-audio-card,codec { + sound-dai = <&ak4648>; + clocks = <&osc>; + bitclock-master; + frame-master; + bitclock-inversion; + }; }; -Example 2 - many DAI links: +Example 3 - single DAI link & new style: +sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "VF610-Tower-Sound-Card"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "External Speaker"; + simple-audio-card,routing = + "MIC_IN", "Microphone Jack", + "Headphone Jack", "HP_OUT", + "External Speaker", "LINE_OUT"; + + simple-audio-card,dai-link { + format = "i2s"; + bitclock-master = <&dailink0_master>; + frame-master = <&dailink0_master>; + cpu { + sound-dai = <&sh_fsi2 0>; + frame-inversion; + }; + dailink0_master: codec { + sound-dai = <&ak4648>; + clocks = <&osc>; + frame-inversion; + }; + }; +}; +Example 4 - many DAI links: sound { compatible = "simple-audio-card"; simple-audio-card,name = "Cubox Audio"; -- 2.1.0.27.g96db324

2 1