August 2013 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] hda-intel missing mixer channels
by Orm Finnendahl 26 Aug '13

26 Aug '13

Hi, I sent this to alsa-user a week ago but didn't get any reply. Does anybody know, what is responsible for the missing faders? Did the driver change or is it some module loading mechanism in the distro which prevents the faders from showing up in alsamixer? This is so strange. Please help! -- Orm -------------------------------------------------------------------- Hi everybody, after the last update of Ubuntu (intrepid to jaunty) on my Lenovo Ideapad my microphone input doesn't work anymore (neither internal nor external). I found out that alsamixer lacks quite a lot of faders in the newer kernel/module compared to the older one. Some of the faders now unavailable were crucial for Mic input to work on the older system so I'd very much like to get them back ;-) Some more infos: Soundcard: Intel 82801G (ICH7 Family) Chip: Realtek ALC269 Module: snd_hda_intel (in both kernels) Older kernel: Ubuntu stock 2.6.27-14-generic Newer kernel: Ubuntu stock 2.6.28-13-rt Is there any way to make the missing controls available or did the driver change and I have to compile the older driver for the new kernel? Yours, Orm

2 3

[alsa-devel] [RFC PATCH 1/3] ALSA: hda - add flags and routines to get devices selection info for DP1.2 MST
by mengdong.lin＠intel.com 26 Aug '13

26 Aug '13

From: Mengdong Lin <mengdong.lin(a)intel.com> This patch adds flags and routines to get device list & selection info on a pin. To support Display Port 1.2 multi-stream transport (MST) over single DP port, a pin can support multiple devices. Please refer to HD-A spec Document Change Notificaton HDA040-A. A display audio codec can set flag "dp_mst" in its patch, indicating its pins can support MST. But at runtime, a pin may not be multi-streaming capable and report the device list is empty, depending on Gfx driver configuration. Signed-off-by: Mengdong Lin <mengdong.lin(a)intel.com> diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index fdbb09a..fb58291 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -666,6 +666,63 @@ int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux, } EXPORT_SYMBOL_HDA(snd_hda_get_conn_index); + +/* return DEVLIST_LEN parameter of the given widget */ +static unsigned int get_num_devices(struct hda_codec *codec, hda_nid_t nid) +{ + unsigned int wcaps = get_wcaps(codec, nid); + unsigned int parm; + + if (!codec->dp_mst || !(wcaps & AC_WCAP_DIGITAL) || + get_wcaps_type(wcaps) != AC_WID_PIN) + return 0; + + parm = snd_hda_param_read(codec, nid, AC_PAR_DEVLIST_LEN); + if (parm == -1 && codec->bus->rirb_error) + parm = 0; + return parm & AC_DEVLIST_LEN; +} + +/** + * snd_hda_get_devices - copy device list without cache + * @codec: the HDA codec + * @nid: NID of the pin to parse + * @dev_list: device list array + * @max_devices: max. number of devices to store + * + * Copy the device list. This info is dynamic and so not cached. + * Currently called only from hda_proc.c, so not exported. + */ +int snd_hda_get_devices(struct hda_codec *codec, hda_nid_t nid, + union hda_devlist_entry *dev_list, int max_devices) +{ + unsigned int parm; + int i, dev_len, devices; + + parm = get_num_devices(codec, nid); + if (!parm) /* not multi-stream capable */ + return 0; + + dev_len = parm + 1; + devices = 0; + + while (devices < dev_len) { + parm = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_DEVICE_LIST, devices); + if (parm == -1 && codec->bus->rirb_error) + break; + + for (i = 0; i < 8; i++) { + dev_list[devices].value = parm & 0x7; + parm >>= 4; + devices++; + if (devices >= dev_len) + break; + } + } + return devices; +} + /** * snd_hda_queue_unsol_event - add an unsolicited event to queue * @bus: the BUS diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 701c2e0..736b55a 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -94,6 +94,8 @@ enum { #define AC_VERB_GET_HDMI_DIP_XMIT 0x0f32 #define AC_VERB_GET_HDMI_CP_CTRL 0x0f33 #define AC_VERB_GET_HDMI_CHAN_SLOT 0x0f34 +#define AC_VERB_GET_DEVICE_SEL 0xf35 +#define AC_VERB_GET_DEVICE_LIST 0xf36 /* * SET verbs @@ -133,6 +135,7 @@ enum { #define AC_VERB_SET_HDMI_DIP_XMIT 0x732 #define AC_VERB_SET_HDMI_CP_CTRL 0x733 #define AC_VERB_SET_HDMI_CHAN_SLOT 0x734 +#define AC_VERB_SET_DEVICE_SEL 0x735 /* * Parameter IDs @@ -154,6 +157,7 @@ enum { #define AC_PAR_GPIO_CAP 0x11 #define AC_PAR_AMP_OUT_CAP 0x12 #define AC_PAR_VOL_KNB_CAP 0x13 +#define AC_PAR_DEVLIST_LEN 0x15 #define AC_PAR_HDMI_LPCM_CAP 0x20 /* @@ -795,6 +799,19 @@ struct hda_pcm { bool own_chmap; /* codec driver provides own channel maps */ }; +/* display pin's device list entry */ +union hda_devlist_entry { + unsigned int value; + struct { + unsigned int present_detect:1; + unsigned int eld_valid:1; + unsigned int inactive:1; + } bits; +}; + +#define AC_MAX_DEVLIST_LEN 64 +#define AC_DEVLIST_LEN 0x3f + /* codec information */ struct hda_codec { struct hda_bus *bus; @@ -885,6 +902,7 @@ struct hda_codec { unsigned int pcm_format_first:1; /* PCM format must be set first */ unsigned int epss:1; /* supporting EPSS? */ unsigned int cached_write:1; /* write only to caches */ + unsigned int dp_mst:1; /* support DP1.2 Multi-stream transport */ #ifdef CONFIG_PM unsigned int power_on :1; /* current (global) power-state */ unsigned int d3_stop_clk:1; /* support D3 operation without BCLK */ @@ -972,6 +990,8 @@ int snd_hda_override_conn_list(struct hda_codec *codec, hda_nid_t nid, int nums, const hda_nid_t *list); int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux, hda_nid_t nid, int recursive); +int snd_hda_get_devices(struct hda_codec *codec, hda_nid_t nid, + union hda_devlist_entry *dev_list, int max_devices); int snd_hda_query_supported_pcm(struct hda_codec *codec, hda_nid_t nid, u32 *ratesp, u64 *formatsp, unsigned int *bpsp); -- 1.8.1.2

3 3

[alsa-devel] [PATCH v2 4/4] ALSA: hda - add device entry and inactive flag to unsolicited response
by mengdong.lin＠intel.com 25 Aug '13

25 Aug '13

From: Mengdong Lin <mengdong.lin(a)intel.com> This patch adds two fields to unsolicited response, according to spec HDA040-A: - Device Entry (bit 20:15) - Inactive (bit 2) and show the info in debug message. Signed-off-by: Mengdong Lin <mengdong.lin(a)intel.com> diff --git a/sound/pci/hda/hda_codec.h b/sound/pci/hda/hda_codec.h index 316076e..c578f5e 100644 --- a/sound/pci/hda/hda_codec.h +++ b/sound/pci/hda/hda_codec.h @@ -255,6 +255,11 @@ enum { #define AC_UNSOL_RES_TAG_SHIFT 26 #define AC_UNSOL_RES_SUBTAG (0x1f<<21) #define AC_UNSOL_RES_SUBTAG_SHIFT 21 +#define AC_UNSOL_RES_DE (0x3f<<15) /* Device Entry + * (for DP1.2 MST) + */ +#define AC_UNSOL_RES_DE_SHIFT 15 +#define AC_UNSOL_RES_IA (1<<2) /* Inactive (for DP1.2 MST) */ #define AC_UNSOL_RES_ELDV (1<<1) /* ELD Data valid (for HDMI) */ #define AC_UNSOL_RES_PD (1<<0) /* pinsense detect */ #define AC_UNSOL_RES_CP_STATE (1<<1) /* content protection */ diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 87ca984..895a0d3 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -959,6 +959,7 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) int pin_nid; int pin_idx; struct hda_jack_tbl *jack; + int dev_entry = (res & AC_UNSOL_RES_DE) >> AC_UNSOL_RES_DE_SHIFT; jack = snd_hda_jack_tbl_get_from_tag(codec, tag); if (!jack) @@ -967,8 +968,8 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) jack->jack_dirty = 1; _snd_printd(SND_PR_VERBOSE, - "HDMI hot plug event: Codec=%d Pin=%d Presence_Detect=%d ELD_Valid=%d\n", - codec->addr, pin_nid, + "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n", + codec->addr, pin_nid, dev_entry, !!(res & AC_UNSOL_RES_IA), !!(res & AC_UNSOL_RES_PD), !!(res & AC_UNSOL_RES_ELDV)); pin_idx = pin_nid_to_pin_index(spec, pin_nid); -- 1.8.1.2

1 0

[alsa-devel] [PATCH v2 3/4] ALSA: hda - Haswell codec exposes device list/select info on pins
by mengdong.lin＠intel.com 25 Aug '13

25 Aug '13

From: Mengdong Lin <mengdong.lin(a)intel.com> This patch is only to allow codec proc file to expose devices list/select info for Haswell codec pins. Since Haswell Gfx driver cannot support DP1.2 MST now, so all pins' device list is empty, meaning no pin is multi-streaming capaple. Signed-off-by: Mengdong Lin <mengdong.lin(a)intel.com> diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 030ca86..87ca984 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -1989,8 +1989,10 @@ static int patch_generic_hdmi(struct hda_codec *codec) return -EINVAL; } codec->patch_ops = generic_hdmi_patch_ops; - if (codec->vendor_id == 0x80862807) + if (codec->vendor_id == 0x80862807) { codec->patch_ops.set_power_state = haswell_set_power_state; + codec->dp_mst = true; + } generic_hdmi_init_per_pins(codec); -- 1.8.1.2

1 0

[alsa-devel] [PATCH v2 2/4] ALSA: hda - add device list & select info of display pins to codec proc file
by mengdong.lin＠intel.com 25 Aug '13

25 Aug '13

From: Mengdong Lin <mengdong.lin(a)intel.com> If a display codec supports multi-stream transport on the pins, the pin's device list length and device entries will be exposed to codec proc file. Signed-off-by: Mengdong Lin <mengdong.lin(a)intel.com> diff --git a/sound/pci/hda/hda_proc.c b/sound/pci/hda/hda_proc.c index 9760f00..1806250 100644 --- a/sound/pci/hda/hda_proc.c +++ b/sound/pci/hda/hda_proc.c @@ -582,6 +582,38 @@ static void print_gpio(struct snd_info_buffer *buffer, print_nid_array(buffer, codec, nid, &codec->nids); } +static void print_device_list(struct snd_info_buffer *buffer, + struct hda_codec *codec, hda_nid_t nid) +{ + int i, curr = -1; + struct hda_devlist_entry dev_list[AC_MAX_DEVLIST_LEN]; + int devlist_len; + + devlist_len = snd_hda_get_devices(codec, nid, dev_list, + AC_MAX_DEVLIST_LEN); + snd_iprintf(buffer, " Devices: %d\n", devlist_len); + if (devlist_len <= 0) + return; + + curr = snd_hda_codec_read(codec, nid, 0, + AC_VERB_GET_DEVICE_SEL, 0); + + for (i = 0; i < devlist_len; i++) { + if (i == curr) + snd_iprintf(buffer, " *"); + else + snd_iprintf(buffer, " "); + + snd_iprintf(buffer, + "Dev %02d: PD = %ld, ELDV = %ld, IA = %ld\n", i, + dev_list[i].present_detect, dev_list[i].eld_valid, + dev_list[i].inactive); + } + + return 0; + +} + static void print_codec_info(struct snd_info_entry *entry, struct snd_info_buffer *buffer) { @@ -751,6 +783,9 @@ static void print_codec_info(struct snd_info_entry *entry, (wid_caps & AC_WCAP_DELAY) >> AC_WCAP_DELAY_SHIFT); + if (wid_type == AC_WID_PIN && codec->dp_mst) + print_device_list(buffer, codec, nid); + if (wid_caps & AC_WCAP_CONN_LIST) print_conn_list(buffer, codec, nid, wid_type, conn, conn_len); -- 1.8.1.2

1 0

[alsa-devel] [PATCH v5 0/2] Add freescale S/PDIF CPU DAI and machine drivers
by Nicolin Chen 24 Aug '13

24 Aug '13

Changelog: v4->v5: * Dropped rx/tx-clksrc-names DT bindings. * Use standard clock binding instead to pass the clock source list. * Update the compatible list by using "imx35", the first SoC that has spdif. v3->v4: * Use regmap for CPU DAI driver. * Use individual clock source for 32KHz, 44KHz, 48KHz playback. * Determine clock source configuration from 'clocks' entry. * Added imx53 to compatible list, merged imx6q and imx6dl in the list. * Improve the algorism of reverse_bits(). * Dropped the unneeded clk_put(). v2->v3: * Removed a wrong tag from the commit of patch-1. v1->v2: * Dropped one applied patch for spdif dummy codec drivers. * Use generic DMA DT binding. * Let spdif controller driver calculate the clock div. * Added one optional clock source for spdif tx. * Reivsed documentation accordingly. Nicolin Chen (2): ASoC: fsl: Add S/PDIF CPU DAI driver ASoC: fsl: Add S/PDIF machine driver .../devicetree/bindings/sound/fsl,spdif.txt | 76 ++ .../devicetree/bindings/sound/imx-audio-spdif.txt | 29 + sound/soc/fsl/Kconfig | 14 + sound/soc/fsl/Makefile | 4 + sound/soc/fsl/fsl_spdif.c | 1336 ++++++++++++++++++++ sound/soc/fsl/fsl_spdif.h | 224 ++++ sound/soc/fsl/imx-spdif.c | 134 ++ 7 files changed, 1817 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/fsl,spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 sound/soc/fsl/fsl_spdif.c create mode 100644 sound/soc/fsl/fsl_spdif.h create mode 100644 sound/soc/fsl/imx-spdif.c

6 36

[alsa-devel] [PATCH 1/2] ASoC: fsl_spdif: Remove unnecessary dev_set_drvdata()
by Fabio Estevam 23 Aug '13

23 Aug '13

From: Fabio Estevam <fabio.estevam(a)freescale.com> Driver core clears the driver data to NULL after device_release or on probe failure, so just remove it. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- sound/soc/fsl/fsl_spdif.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c index 42a4382..bf58086 100644 --- a/sound/soc/fsl/fsl_spdif.c +++ b/sound/soc/fsl/fsl_spdif.c @@ -1184,7 +1184,7 @@ static int fsl_spdif_probe(struct platform_device *pdev) &spdif_priv->cpu_dai_drv, 1); if (ret) { dev_err(&pdev->dev, "failed to register DAI: %d\n", ret); - goto error_dev; + return ret; } ret = imx_pcm_dma_init(pdev); @@ -1197,8 +1197,6 @@ static int fsl_spdif_probe(struct platform_device *pdev) error_component: snd_soc_unregister_component(&pdev->dev); -error_dev: - dev_set_drvdata(&pdev->dev, NULL); return ret; } -- 1.8.1.2

1 1

[alsa-devel] [PATCH] ASoC: simple-card: Provide owner and MODULE_ALIAS()
by Fabio Estevam 23 Aug '13

23 Aug '13

From: Fabio Estevam <fabio.estevam(a)freescale.com> Add .owner field and also MODULE_ALIAS(), so that auto module loading can work. Signed-off-by: Fabio Estevam <fabio.estevam(a)freescale.com> --- sound/soc/generic/simple-card.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/generic/simple-card.c b/sound/soc/generic/simple-card.c index 6cf8355..8c49147 100644 --- a/sound/soc/generic/simple-card.c +++ b/sound/soc/generic/simple-card.c @@ -105,6 +105,7 @@ static int asoc_simple_card_remove(struct platform_device *pdev) static struct platform_driver asoc_simple_card = { .driver = { .name = "asoc-simple-card", + .owner = THIS_MODULE, }, .probe = asoc_simple_card_probe, .remove = asoc_simple_card_remove, @@ -112,6 +113,7 @@ static struct platform_driver asoc_simple_card = { module_platform_driver(asoc_simple_card); +MODULE_ALIAS("platform:asoc-simple-card"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("ASoC Simple Sound Card"); MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx(a)renesas.com>"); -- 1.8.1.2

1 0

[alsa-devel] [PATCH V3] ASoC: rt5640: change widget sequence for depop
by bardliao＠realtek.com 23 Aug '13

23 Aug '13

From: Bard Liao <bardliao(a)realtek.com> Signed-off-by: Bard Liao <bardliao(a)realtek.com> --- I removed RT5640_[LR]_MUTE bits control in rt5640_hp_event. And moved the required delay for hp depop to rt5640_hp_post_event. This delay time is for waitting for the codec finish the depop process. You will not haer anything if you play a very short sound without this delay. So I put it in post_event. And I think it is fine if hp is unmute during playback without this delay. I use rt5640->hp_mute to record the "HP Amp"'s status. However, I think it is better to use a dapm API for that purpose. But I don't know if there is a suitable API for it. Can anyone give me some advice? Thanks in advance. --- sound/soc/codecs/rt5640.c | 217 ++++++++++++++++++++++++++++++++++------------ sound/soc/codecs/rt5640.h | 12 +++ 2 files changed, 175 insertions(+), 54 deletions(-) diff --git a/sound/soc/codecs/rt5640.c b/sound/soc/codecs/rt5640.c index 4db7314..c26a8f8 100644 --- a/sound/soc/codecs/rt5640.c +++ b/sound/soc/codecs/rt5640.c @@ -50,8 +50,6 @@ static const struct regmap_range_cfg rt5640_ranges[] = { static struct reg_default init_list[] = { {RT5640_PR_BASE + 0x3d, 0x3600}, - {RT5640_PR_BASE + 0x1c, 0x0D21}, - {RT5640_PR_BASE + 0x1b, 0x0000}, {RT5640_PR_BASE + 0x12, 0x0aa8}, {RT5640_PR_BASE + 0x14, 0x0aaa}, {RT5640_PR_BASE + 0x20, 0x6110}, @@ -384,15 +382,11 @@ static const SOC_ENUM_SINGLE_DECL( static const struct snd_kcontrol_new rt5640_snd_controls[] = { /* Speaker Output Volume */ - SOC_DOUBLE("Speaker Playback Switch", RT5640_SPK_VOL, - RT5640_L_MUTE_SFT, RT5640_R_MUTE_SFT, 1, 1), SOC_DOUBLE("Speaker Channel Switch", RT5640_SPK_VOL, RT5640_VOL_L_SFT, RT5640_VOL_R_SFT, 1, 1), SOC_DOUBLE_TLV("Speaker Playback Volume", RT5640_SPK_VOL, RT5640_L_VOL_SFT, RT5640_R_VOL_SFT, 39, 1, out_vol_tlv), /* Headphone Output Volume */ - SOC_DOUBLE("HP Playback Switch", RT5640_HP_VOL, - RT5640_L_MUTE_SFT, RT5640_R_MUTE_SFT, 1, 1), SOC_DOUBLE("HP Channel Switch", RT5640_HP_VOL, RT5640_VOL_L_SFT, RT5640_VOL_R_SFT, 1, 1), SOC_DOUBLE_TLV("HP Playback Volume", RT5640_HP_VOL, @@ -737,6 +731,22 @@ static const struct snd_kcontrol_new rt5640_mono_mix[] = { RT5640_M_BST1_MM_SFT, 1, 1), }; +static const struct snd_kcontrol_new spk_l_enable_control = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5640_SPK_VOL, + RT5640_L_MUTE_SFT, 1, 1); + +static const struct snd_kcontrol_new spk_r_enable_control = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5640_SPK_VOL, + RT5640_R_MUTE_SFT, 1, 1); + +static const struct snd_kcontrol_new hp_l_enable_control = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5640_HP_VOL, + RT5640_L_MUTE_SFT, 1, 1); + +static const struct snd_kcontrol_new hp_r_enable_control = + SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5640_HP_VOL, + RT5640_R_MUTE_SFT, 1, 1); + /* Stereo ADC source */ static const char * const rt5640_stereo_adc1_src[] = { "DIG MIX", "ADC" @@ -868,33 +878,6 @@ static const SOC_ENUM_SINGLE_DECL( static const struct snd_kcontrol_new rt5640_sdi_mux = SOC_DAPM_ENUM("SDI select", rt5640_sdi_sel_enum); -static int spk_event(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = w->codec; - struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); - - switch (event) { - case SND_SOC_DAPM_POST_PMU: - regmap_update_bits(rt5640->regmap, RT5640_PWR_DIG1, - 0x0001, 0x0001); - regmap_update_bits(rt5640->regmap, RT5640_PR_BASE + 0x1c, - 0xf000, 0xf000); - break; - - case SND_SOC_DAPM_PRE_PMD: - regmap_update_bits(rt5640->regmap, RT5640_PR_BASE + 0x1c, - 0xf000, 0x0000); - regmap_update_bits(rt5640->regmap, RT5640_PWR_DIG1, - 0x0001, 0x0000); - break; - - default: - return 0; - } - return 0; -} - static int rt5640_set_dmic1_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -943,6 +926,117 @@ static int rt5640_set_dmic2_event(struct snd_soc_dapm_widget *w, return 0; } +void hp_amp_power_on(struct snd_soc_codec *codec) +{ + struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); + + /* depop parameters */ + regmap_update_bits(rt5640->regmap, RT5640_PR_BASE + + RT5640_CHPUMP_INT_REG1, 0x0700, 0x0200); + regmap_update_bits(rt5640->regmap, RT5640_DEPOP_M2, + RT5640_DEPOP_MASK, RT5640_DEPOP_MAN); + regmap_update_bits(rt5640->regmap, RT5640_DEPOP_M1, + RT5640_HP_CP_MASK | RT5640_HP_SG_MASK | RT5640_HP_CB_MASK, + RT5640_HP_CP_PU | RT5640_HP_SG_DIS | RT5640_HP_CB_PU); + regmap_write(rt5640->regmap, RT5640_PR_BASE + RT5640_HP_DCC_INT1, + 0x9f00); + /* headphone amp power on */ + regmap_update_bits(rt5640->regmap, RT5640_PWR_ANLG1, + RT5640_PWR_FV1 | RT5640_PWR_FV2, 0); + regmap_update_bits(rt5640->regmap, RT5640_PWR_ANLG1, + RT5640_PWR_HA, + RT5640_PWR_HA); + usleep_range(10000, 15000); + regmap_update_bits(rt5640->regmap, RT5640_PWR_ANLG1, + RT5640_PWR_FV1 | RT5640_PWR_FV2 , + RT5640_PWR_FV1 | RT5640_PWR_FV2); +} + +static void rt5640_pmu_depop(struct snd_soc_codec *codec) +{ + struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); + + regmap_update_bits(rt5640->regmap, RT5640_DEPOP_M2, + RT5640_DEPOP_MASK | RT5640_DIG_DP_MASK, + RT5640_DEPOP_AUTO | RT5640_DIG_DP_EN); + regmap_update_bits(rt5640->regmap, RT5640_CHARGE_PUMP, + RT5640_PM_HP_MASK, RT5640_PM_HP_HV); + + regmap_update_bits(rt5640->regmap, RT5640_DEPOP_M3, + RT5640_CP_FQ1_MASK | RT5640_CP_FQ2_MASK | RT5640_CP_FQ3_MASK, + (RT5640_CP_FQ_192_KHZ << RT5640_CP_FQ1_SFT) | + (RT5640_CP_FQ_12_KHZ << RT5640_CP_FQ2_SFT) | + (RT5640_CP_FQ_192_KHZ << RT5640_CP_FQ3_SFT)); + + regmap_write(rt5640->regmap, RT5640_PR_BASE + + RT5640_MAMP_INT_REG2, 0x1c00); + regmap_update_bits(rt5640->regmap, RT5640_DEPOP_M1, + RT5640_HP_CP_MASK | RT5640_HP_SG_MASK, + RT5640_HP_CP_PD | RT5640_HP_SG_EN); + regmap_update_bits(rt5640->regmap, RT5640_PR_BASE + + RT5640_CHPUMP_INT_REG1, 0x0700, 0x0400); +} + +static int rt5640_hp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + rt5640_pmu_depop(codec); + rt5640->hp_mute = 0; + break; + + case SND_SOC_DAPM_PRE_PMD: + rt5640->hp_mute = 1; + usleep_range(70000, 75000); + break; + + default: + return 0; + } + + return 0; +} + +static int rt5640_hp_power_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + hp_amp_power_on(codec); + break; + default: + return 0; + } + + return 0; +} + +static int rt5640_hp_post_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct rt5640_priv *rt5640 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + if (!rt5640->hp_mute) + usleep_range(80000, 85000); + + break; + + default: + return 0; + } + + return 0; +} + static const struct snd_soc_dapm_widget rt5640_dapm_widgets[] = { SND_SOC_DAPM_SUPPLY("PLL1", RT5640_PWR_ANLG2, RT5640_PWR_PLL_BIT, 0, NULL, 0), @@ -1132,15 +1226,28 @@ static const struct snd_soc_dapm_widget rt5640_dapm_widgets[] = { rt5640_mono_mix, ARRAY_SIZE(rt5640_mono_mix)), SND_SOC_DAPM_SUPPLY("Improve MONO Amp Drv", RT5640_PWR_ANLG1, RT5640_PWR_MA_BIT, 0, NULL, 0), - SND_SOC_DAPM_SUPPLY("Improve HP Amp Drv", RT5640_PWR_ANLG1, - SND_SOC_NOPM, 0, NULL, 0), - SND_SOC_DAPM_PGA("HP L Amp", RT5640_PWR_ANLG1, + SND_SOC_DAPM_SUPPLY_S("Improve HP Amp Drv", 1, SND_SOC_NOPM, + 0, 0, rt5640_hp_power_event, SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_PGA_S("HP Amp", 1, SND_SOC_NOPM, 0, 0, + rt5640_hp_event, + SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), + SND_SOC_DAPM_SUPPLY("HP L Amp", RT5640_PWR_ANLG1, RT5640_PWR_HP_L_BIT, 0, NULL, 0), - SND_SOC_DAPM_PGA("HP R Amp", RT5640_PWR_ANLG1, + SND_SOC_DAPM_SUPPLY("HP R Amp", RT5640_PWR_ANLG1, RT5640_PWR_HP_R_BIT, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("Improve SPK Amp Drv", RT5640_PWR_DIG1, - SND_SOC_NOPM, 0, spk_event, - SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU), + RT5640_PWR_CLS_D_BIT, 0, NULL, 0), + + /* Output Switch */ + SND_SOC_DAPM_SWITCH("Speaker L Playback", SND_SOC_NOPM, 0, 0, + &spk_l_enable_control), + SND_SOC_DAPM_SWITCH("Speaker R Playback", SND_SOC_NOPM, 0, 0, + &spk_r_enable_control), + SND_SOC_DAPM_SWITCH("HP L Playback", SND_SOC_NOPM, 0, 0, + &hp_l_enable_control), + SND_SOC_DAPM_SWITCH("HP R Playback", SND_SOC_NOPM, 0, 0, + &hp_r_enable_control), + SND_SOC_DAPM_POST("HP Post", rt5640_hp_post_event), /* Output Lines */ SND_SOC_DAPM_OUTPUT("SPOLP"), SND_SOC_DAPM_OUTPUT("SPOLN"), @@ -1381,9 +1488,11 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"HPO MIX L", "HPO MIX DAC2 Switch", "DAC L2"}, {"HPO MIX L", "HPO MIX DAC1 Switch", "DAC L1"}, {"HPO MIX L", "HPO MIX HPVOL Switch", "HPOVOL L"}, + {"HPO MIX L", NULL, "HP L Amp"}, {"HPO MIX R", "HPO MIX DAC2 Switch", "DAC R2"}, {"HPO MIX R", "HPO MIX DAC1 Switch", "DAC R1"}, {"HPO MIX R", "HPO MIX HPVOL Switch", "HPOVOL R"}, + {"HPO MIX R", NULL, "HP R Amp"}, {"LOUT MIX", "DAC L1 Switch", "DAC L1"}, {"LOUT MIX", "DAC R1 Switch", "DAC R1"}, @@ -1396,13 +1505,15 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"Mono MIX", "OUTVOL L Switch", "OUTVOL L"}, {"Mono MIX", "BST1 Switch", "BST1"}, - {"HP L Amp", NULL, "HPO MIX L"}, - {"HP R Amp", NULL, "HPO MIX R"}, + {"HP Amp", NULL, "HPO MIX L"}, + {"HP Amp", NULL, "HPO MIX R"}, - {"SPOLP", NULL, "SPOL MIX"}, - {"SPOLN", NULL, "SPOL MIX"}, - {"SPORP", NULL, "SPOR MIX"}, - {"SPORN", NULL, "SPOR MIX"}, + {"Speaker L Playback", "Switch", "SPOL MIX"}, + {"Speaker R Playback", "Switch", "SPOR MIX"}, + {"SPOLP", NULL, "Speaker L Playback"}, + {"SPOLN", NULL, "Speaker L Playback"}, + {"SPORP", NULL, "Speaker R Playback"}, + {"SPORN", NULL, "Speaker R Playback"}, {"SPOLP", NULL, "Improve SPK Amp Drv"}, {"SPOLN", NULL, "Improve SPK Amp Drv"}, @@ -1412,8 +1523,10 @@ static const struct snd_soc_dapm_route rt5640_dapm_routes[] = { {"HPOL", NULL, "Improve HP Amp Drv"}, {"HPOR", NULL, "Improve HP Amp Drv"}, - {"HPOL", NULL, "HP L Amp"}, - {"HPOR", NULL, "HP R Amp"}, + {"HP L Playback", "Switch", "HP Amp"}, + {"HP R Playback", "Switch", "HP Amp"}, + {"HPOL", NULL, "HP L Playback"}, + {"HPOR", NULL, "HP R Playback"}, {"LOUTL", NULL, "LOUT MIX"}, {"LOUTR", NULL, "LOUT MIX"}, {"MONOP", NULL, "Mono MIX"}, @@ -1792,17 +1905,13 @@ static int rt5640_set_bias_level(struct snd_soc_codec *codec, RT5640_PWR_BG | RT5640_PWR_VREF2, RT5640_PWR_VREF1 | RT5640_PWR_MB | RT5640_PWR_BG | RT5640_PWR_VREF2); - mdelay(10); + usleep_range(10000, 15000); snd_soc_update_bits(codec, RT5640_PWR_ANLG1, RT5640_PWR_FV1 | RT5640_PWR_FV2, RT5640_PWR_FV1 | RT5640_PWR_FV2); regcache_sync(rt5640->regmap); snd_soc_update_bits(codec, RT5640_DUMMY1, 0x0301, 0x0301); - snd_soc_update_bits(codec, RT5640_DEPOP_M1, - 0x001d, 0x0019); - snd_soc_update_bits(codec, RT5640_DEPOP_M2, - 0x2000, 0x2000); snd_soc_update_bits(codec, RT5640_MICBIAS, 0x0030, 0x0030); } @@ -1846,8 +1955,6 @@ static int rt5640_probe(struct snd_soc_codec *codec) rt5640_set_bias_level(codec, SND_SOC_BIAS_OFF); snd_soc_update_bits(codec, RT5640_DUMMY1, 0x0301, 0x0301); - snd_soc_update_bits(codec, RT5640_DEPOP_M1, 0x001d, 0x0019); - snd_soc_update_bits(codec, RT5640_DEPOP_M2, 0x2000, 0x2000); snd_soc_update_bits(codec, RT5640_MICBIAS, 0x0030, 0x0030); snd_soc_update_bits(codec, RT5640_DSP_PATH2, 0xfc00, 0x0c00); @@ -2069,6 +2176,8 @@ static int rt5640_i2c_probe(struct i2c_client *i2c, regmap_update_bits(rt5640->regmap, RT5640_IN3_IN4, RT5640_IN_DF2, RT5640_IN_DF2); + rt5640->hp_mute = 1; + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_rt5640, rt5640_dai, ARRAY_SIZE(rt5640_dai)); if (ret < 0) diff --git a/sound/soc/codecs/rt5640.h b/sound/soc/codecs/rt5640.h index c48286d..5e8df25a 100644 --- a/sound/soc/codecs/rt5640.h +++ b/sound/soc/codecs/rt5640.h @@ -145,6 +145,8 @@ /* Index of Codec Private Register definition */ +#define RT5640_CHPUMP_INT_REG1 0x24 +#define RT5640_MAMP_INT_REG2 0x37 #define RT5640_3D_SPK 0x63 #define RT5640_WND_1 0x6c #define RT5640_WND_2 0x6d @@ -153,6 +155,7 @@ #define RT5640_WND_5 0x70 #define RT5640_WND_8 0x73 #define RT5640_DIP_SPK_INF 0x75 +#define RT5640_HP_DCC_INT1 0x77 #define RT5640_EQ_BW_LOP 0xa0 #define RT5640_EQ_GN_LOP 0xa1 #define RT5640_EQ_FC_BP1 0xa2 @@ -1201,6 +1204,14 @@ #define RT5640_CP_FQ2_SFT 4 #define RT5640_CP_FQ3_MASK (0x7) #define RT5640_CP_FQ3_SFT 0 +#define RT5640_CP_FQ_1_5_KHZ 0 +#define RT5640_CP_FQ_3_KHZ 1 +#define RT5640_CP_FQ_6_KHZ 2 +#define RT5640_CP_FQ_12_KHZ 3 +#define RT5640_CP_FQ_24_KHZ 4 +#define RT5640_CP_FQ_48_KHZ 5 +#define RT5640_CP_FQ_96_KHZ 6 +#define RT5640_CP_FQ_192_KHZ 7 /* HPOUT charge pump (0x91) */ #define RT5640_OSW_L_MASK (0x1 << 11) @@ -2087,6 +2098,7 @@ struct rt5640_priv { int pll_out; int dmic_en; + bool hp_mute; }; #endif -- 1.8.1.1.439.g50a6b54

3 4

Re: [alsa-devel] usb-audio: Reloop Play support (TI TUSB3200AC)
by Daniel Mack 23 Aug '13

23 Aug '13

[Please do not drop the mailing list address] On 19.10.2012 15:45, Didier 'Ptitjes' Villevalois wrote: > On ven., 2012-10-19 at 15:20 +0200, Daniel Mack wrote: >> On 19.10.2012 15:09, Didier 'Ptitjes' Villevalois wrote: >>> Hello, >>> >>> I've bought a Reloop Play usb soundcard and I'd like to make it work >>> with ALSA. >>> >>> It is a 4-channels USB soundcard. It is currently correctly recognized >>> by ALSA as a 4-channels soundcard and I can correctly open the channels >>> and feed them with audio. However, no audio is output by the box. >> >> You're most probably affected by a regression in the driver that was >> fixes in 3.6.0 and 3.5.5 (and all later kernels). Could you please try >> one of these and tell us if that works? > > Sure, I'll do that now (I'm currently using 3.5.4 + mbp8,3 patches). > I guess 3.5.7 is OK ? I'm building it now and will reboot on that. Any kernel >= 3.6.0 and 3.5.5 should be ok. >>> It seems to contain a Texas Instrument TUSB3200AC chipset (same chipset >>> as the Maya44 USB and Hercules DJ console). I guess the problem is a >>> firmware problem but I don't know what to do about it. >>> >>> I've got a MacOS X driver that works correctly, if that of any help. (I >>> suppose the Windows driver works too but I don't have any Windows at >>> hand.) >> >> Did you install any vendor driver on OS X or does it just work with the >> one that ships with the OS? > > Yep, I had to install the Vendor-provided driver. What was the effect without that special driver? Could you see the device listed in the AudioMIDISetup? Could you stream audio? IOW, is the effect you see there comparable to how your Linux box behaves? You could try and remove that driver again and see what happens. > But it seems the > built-in USB soundcard support on MacOS is very poor. No it's not. In fact, it's actually very good. Vendors who keep their hardware compliant to the USB audio spec don't have to ship any driver at all. And this is how it should be on Linux, too. > Also the mpkg install file (inside the provided install dmg file) was > called something like "firmware0_and_driver.mpkg". This is why I > suspected a firmware problem. However I tried to look at the package > content and did not find any .bin file or whatever could be a standalone > firmware file. Maybe it is embedded in the driver install executable. Maybe, but they could also write the firmware permanently to the device once with that tool. That would be perfect for Linux users. Daniel

3 10