March 2011 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH v2] sound/oss: remove offset from load_patch callbacks
by Dan Rosenberg 23 Mar '11

23 Mar '11

Was: [PATCH] sound/oss/midi_synth: prevent underflow, use of uninitialized value, and signedness issue The offset passed to midi_synth_load_patch() can be essentially arbitrary. If it's greater than the header length, this will result in a copy_from_user(dst, src, negative_val). While this will just return -EFAULT on x86, on other architectures this may cause memory corruption. Additionally, the length field of the sysex_info structure may not be initialized prior to its use. Finally, a signed comparison may result in an unintentionally large loop. On suggestion by Takashi Iwai, version two removes the offset argument from the load_patch callbacks entirely, which also resolves similar issues in opl3. Compile tested only. Signed-off-by: Dan Rosenberg <drosenberg(a)vsecurity.com> Cc: stable(a)kernel.org --- sound/oss/dev_table.h | 2 +- sound/oss/midi_synth.c | 27 ++++++++++++--------------- sound/oss/midi_synth.h | 2 +- sound/oss/opl3.c | 4 ++-- sound/oss/sequencer.c | 2 +- 5 files changed, 17 insertions(+), 20 deletions(-) diff --git a/sound/oss/dev_table.h b/sound/oss/dev_table.h index b7617be..0199a31 100644 --- a/sound/oss/dev_table.h +++ b/sound/oss/dev_table.h @@ -271,7 +271,7 @@ struct synth_operations void (*reset) (int dev); void (*hw_control) (int dev, unsigned char *event); int (*load_patch) (int dev, int format, const char __user *addr, - int offs, int count, int pmgr_flag); + int count, int pmgr_flag); void (*aftertouch) (int dev, int voice, int pressure); void (*controller) (int dev, int voice, int ctrl_num, int value); void (*panning) (int dev, int voice, int value); diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c index 3c09374..8d3611c 100644 --- a/sound/oss/midi_synth.c +++ b/sound/oss/midi_synth.c @@ -476,7 +476,7 @@ EXPORT_SYMBOL(midi_synth_hw_control); int midi_synth_load_patch(int dev, int format, const char __user *addr, - int offs, int count, int pmgr_flag) + int count, int pmgr_flag) { int orig_dev = synth_devs[dev]->midi_dev; @@ -491,16 +491,14 @@ midi_synth_load_patch(int dev, int format, const char __user *addr, if (!prefix_cmd(orig_dev, 0xf0)) return 0; + /* Invalid patch format */ if (format != SYSEX_PATCH) - { -/* printk("MIDI Error: Invalid patch format (key) 0x%x\n", format);*/ return -EINVAL; - } + + /* Patch header too short */ if (count < hdr_size) - { -/* printk("MIDI Error: Patch header too short\n");*/ return -EINVAL; - } + count -= hdr_size; /* @@ -508,16 +506,15 @@ midi_synth_load_patch(int dev, int format, const char __user *addr, * been transferred already. */ - if(copy_from_user(&((char *) &sysex)[offs], &(addr)[offs], hdr_size - offs)) + if (copy_from_user(&sysex, addr, hdr_size)) return -EFAULT; - - if (count < sysex.len) - { -/* printk(KERN_WARNING "MIDI Warning: Sysex record too short (%d<%d)\n", count, (int) sysex.len);*/ + + /* Sysex record too short */ + if ((unsigned)count < (unsigned)sysex.len) sysex.len = count; - } - left = sysex.len; - src_offs = 0; + + left = sysex.len; + src_offs = 0; for (i = 0; i < left && !signal_pending(current); i++) { diff --git a/sound/oss/midi_synth.h b/sound/oss/midi_synth.h index 6bc9d00..b64ddd6 100644 --- a/sound/oss/midi_synth.h +++ b/sound/oss/midi_synth.h @@ -8,7 +8,7 @@ int midi_synth_open (int dev, int mode); void midi_synth_close (int dev); void midi_synth_hw_control (int dev, unsigned char *event); int midi_synth_load_patch (int dev, int format, const char __user * addr, - int offs, int count, int pmgr_flag); + int count, int pmgr_flag); void midi_synth_panning (int dev, int channel, int pressure); void midi_synth_aftertouch (int dev, int channel, int pressure); void midi_synth_controller (int dev, int channel, int ctrl_num, int value); diff --git a/sound/oss/opl3.c b/sound/oss/opl3.c index 938c48c..a3bec38 100644 --- a/sound/oss/opl3.c +++ b/sound/oss/opl3.c @@ -820,7 +820,7 @@ static void opl3_hw_control(int dev, unsigned char *event) } static int opl3_load_patch(int dev, int format, const char __user *addr, - int offs, int count, int pmgr_flag) + int count, int pmgr_flag) { struct sbi_instrument ins; @@ -834,7 +834,7 @@ static int opl3_load_patch(int dev, int format, const char __user *addr, * What the fuck is going on here? We leave junk in the beginning * of ins and then check the field pretty close to that beginning? */ - if(copy_from_user(&((char *) &ins)[offs], addr + offs, sizeof(ins) - offs)) + if (copy_from_user(&ins, addr, sizeof(ins))) return -EFAULT; if (ins.channel < 0 || ins.channel >= SBFM_MAXINSTR) diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c index 5ea1098..2e842cb 100644 --- a/sound/oss/sequencer.c +++ b/sound/oss/sequencer.c @@ -241,7 +241,7 @@ int sequencer_write(int dev, struct file *file, const char __user *buf, int coun return -ENXIO; fmt = (*(short *) &event_rec[0]) & 0xffff; - err = synth_devs[dev]->load_patch(dev, fmt, buf, p + 4, c, 0); + err = synth_devs[dev]->load_patch(dev, fmt, buf, c, 0); if (err < 0) return err;

2 3

[alsa-devel] PROBLEM: Asoc driver in 2.6.37.3 for AT91SAM9260 / TLV320AIC3X is broken
by Prchal Jiří 23 Mar '11

23 Mar '11

Hallo, at first I would like to apologize of sending this report to too many mails, but I can't find the right person / list. [2.] Full description of the problem/report: I try for almost 2 month to make kernel with alsa for my hardware. I first try version 2.6.37, now trying 2.6.37.3. My hw i similar to board afeb-9260, just with difference my codec is TLV320AIC3106 connected as slave with clock on BCLK. So I change file snd-soc-afeb9260.c, diff is attached, and Kconfig and Makefile too. In version 2.6.35.11 it works good, but MMC/SD card doesn't work. (Something is broken it that driver just in this version). I need to work sound and SD card. I thing the problem is somewhere between "tlv320aic3x-codec 0-001a: probe" and "i2c-core: driver [tlv320aic3x-codec] registered". In version 2.6.35.11 there is I2C communication, in 2.6.37 and higher nothing on I2C. I also try to put newer alsa 1.0.24 to kernel 2.6.37.3 without any improvement. Trying to put older alsa (but same version?) from kernel 2.6.35.11 to 2.6.37.3 produce soundcard, but when try to play kernel oops, "cannot dereference null pointer" and freezes. I try many versions of /* Digital audio interface glue - connects codec <--> CPU */ static struct snd_soc_dai_link afeb9260_dai = { .name = "TLV320AIC3X", //AIC3X .stream_name = "AIC3X", .cpu_dai_name = "atmel-ssc-dai.0", //atmel-ssc-dai .codec_dai_name = "tlv320aic3x-hifi", //aic3x, aic3x-hifi, tlv320aic3x .platform_name = "atmel-pcm-audio", //atmel_pcm-audio .codec_name = "tlv320aic3x-codec.0-001a", //tlv320aic3x-codec.0-0x1a .init = afeb9260_aic3x_init, .ops = &afeb9260_ops, }; but without any improvement. I really don't know what should I try at next, I thing I've tryed all. [3.] Keywords (i.e., modules, networking, kernel): ALSA, Asoc, soc, audio, sound, codec [4.] Kernel information [4.1.] Kernel version (from /proc/version): Linux version 2.6.37.3-cdu (prchal@prchal) (gcc version 4.4.5 (GCC) ) #26 PREEMPT Thu Mar 10 16:41:10 CET 2011 [4.2.] Kernel .config file: # # Automatically generated make config: don't edit # Linux/arm 2.6.37.3 Kernel Configuration # Thu Mar 10 16:40:55 2011 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_USES_GETTIMEOFFSET is not set CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y CONFIG_HAVE_IRQ_WORK=y # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" CONFIG_LOCALVERSION="-cdu" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_LZO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set # CONFIG_HAVE_GENERIC_HARDIRQS is not set # CONFIG_SPARSE_IRQ is not set # # RCU Subsystem # CONFIG_TREE_PREEMPT_RCU=y # CONFIG_TINY_RCU is not set # CONFIG_TINY_PREEMPT_RCU is not set CONFIG_PREEMPT_RCU=y # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=32 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y # CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # # CONFIG_PERF_EVENTS is not set # CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_COMPAT_BRK=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_CLK=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y CONFIG_LBDAF=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_INLINE_SPIN_TRYLOCK is not set # CONFIG_INLINE_SPIN_TRYLOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK is not set # CONFIG_INLINE_SPIN_LOCK_BH is not set # CONFIG_INLINE_SPIN_LOCK_IRQ is not set # CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set # CONFIG_INLINE_SPIN_UNLOCK is not set # CONFIG_INLINE_SPIN_UNLOCK_BH is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set # CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_READ_TRYLOCK is not set # CONFIG_INLINE_READ_LOCK is not set # CONFIG_INLINE_READ_LOCK_BH is not set # CONFIG_INLINE_READ_LOCK_IRQ is not set # CONFIG_INLINE_READ_LOCK_IRQSAVE is not set # CONFIG_INLINE_READ_UNLOCK is not set # CONFIG_INLINE_READ_UNLOCK_BH is not set # CONFIG_INLINE_READ_UNLOCK_IRQ is not set # CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set # CONFIG_INLINE_WRITE_TRYLOCK is not set # CONFIG_INLINE_WRITE_LOCK is not set # CONFIG_INLINE_WRITE_LOCK_BH is not set # CONFIG_INLINE_WRITE_LOCK_IRQ is not set # CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set # CONFIG_INLINE_WRITE_UNLOCK is not set # CONFIG_INLINE_WRITE_UNLOCK_BH is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set # CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set # CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_VEXPRESS is not set CONFIG_ARCH_AT91=y # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_MXC is not set # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_LPC32XX is not set # CONFIG_ARCH_MV78XX0 is not set # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_MMP is not set # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set # CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_TEGRA is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set # CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P64X0 is not set # CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_S5PV310 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_TCC_926 is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set # CONFIG_ARCH_U8500 is not set # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set # CONFIG_PLAT_SPEAR is not set CONFIG_HAVE_AT91_USART3=y CONFIG_HAVE_AT91_USART4=y CONFIG_HAVE_AT91_USART5=y # # Atmel AT91 System-on-Chip # # CONFIG_ARCH_AT91RM9200 is not set CONFIG_ARCH_AT91SAM9260=y # CONFIG_ARCH_AT91SAM9261 is not set # CONFIG_ARCH_AT91SAM9G10 is not set # CONFIG_ARCH_AT91SAM9263 is not set # CONFIG_ARCH_AT91SAM9RL is not set # CONFIG_ARCH_AT91SAM9G20 is not set # CONFIG_ARCH_AT91SAM9G45 is not set # CONFIG_ARCH_AT91CAP9 is not set # CONFIG_ARCH_AT572D940HF is not set # CONFIG_ARCH_AT91X40 is not set CONFIG_AT91_PMC_UNIT=y # # AT91SAM9260 Variants # # CONFIG_ARCH_AT91SAM9260_SAM9XE is not set # # AT91SAM9260 / AT91SAM9XE Board Type # # CONFIG_MACH_AT91SAM9260EK is not set CONFIG_MACH_CDU=y # CONFIG_MACH_CAM60 is not set # CONFIG_MACH_SAM9_L9260 is not set # CONFIG_MACH_AFEB9260 is not set # CONFIG_MACH_USB_A9260 is not set # CONFIG_MACH_QIL_A9260 is not set # CONFIG_MACH_CPU9260 is not set # CONFIG_MACH_FLEXIBITY is not set # # AT91SAM9260/AT91SAM9G20 boards # # CONFIG_MACH_SNAPPER_9260 is not set # # AT91 Board Options # # # AT91 Feature Selections # CONFIG_AT91_PROGRAMMABLE_CLOCKS=y CONFIG_AT91_TIMER_HZ=100 CONFIG_AT91_EARLY_DBGU=y # CONFIG_AT91_EARLY_USART0 is not set # CONFIG_AT91_EARLY_USART1 is not set # CONFIG_AT91_EARLY_USART2 is not set # CONFIG_AT91_EARLY_USART3 is not set # CONFIG_AT91_EARLY_USART4 is not set # CONFIG_AT91_EARLY_USART5 is not set # # Processor Type # CONFIG_CPU_ARM926T=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5TJ=y CONFIG_CPU_PABRT_LEGACY=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y # # Processor Features # CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set # CONFIG_CPU_CACHE_ROUND_ROBIN is not set CONFIG_ARM_L1_CACHE_SHIFT=5 # # Bus support # # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # # Kernel Features # CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_NEED_PER_CPU_KM=y CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_LEDS is not set CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set # CONFIG_SECCOMP is not set # CONFIG_CC_STACKPROTECTOR is not set # CONFIG_DEPRECATED_PARAM_STRUCT is not set # # Boot options # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" # CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set # CONFIG_AUTO_ZRELADDR is not set # # CPU Power Management # # CONFIG_CPU_IDLE is not set # # Floating point emulation # # # At least one emulation must be selected # CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_MULTIPLE_TABLES is not set # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set CONFIG_IP_PNP=y # CONFIG_IP_PNP_DHCP is not set CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_PHY_TIMESTAMPING is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set # CONFIG_WIRELESS is not set # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=1 # CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set # CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set # CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers # # CONFIG_MTD_CFI is not set # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLOCK2MTD is not set # # Disk-On-Chip Device Drivers # # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_ATMEL=y # CONFIG_MTD_NAND_ATMEL_ECC_HW is not set CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y # CONFIG_MTD_NAND_ATMEL_ECC_NONE is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set # CONFIG_BLK_DEV is not set CONFIG_MISC_DEVICES=y # CONFIG_AD525X_DPOT is not set # CONFIG_ATMEL_TCLIB is not set # CONFIG_ICS932S401 is not set CONFIG_ATMEL_SSC=y # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_BMP085 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_IWMC3200TOP is not set # # Texas Instruments shared transport line discipline # CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set # CONFIG_CHR_DEV_SCH is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_HAVE_NET_MACB=y CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_MII is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set # CONFIG_LXT_PHY is not set # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_BCM63XX_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_NATIONAL_PHY is not set # CONFIG_STE10XP is not set # CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MICREL_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MACB=y # CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set # CONFIG_DNET is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_KS8851_MLL is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_WLAN is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_IPHETH is not set # CONFIG_WAN is not set # # CAIF transport drivers # CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set CONFIG_PPP_ASYNC=y # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_MPPE=y # CONFIG_PPPOE is not set # CONFIG_SLIP is not set CONFIG_SLHC=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # # CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_N_GSM is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_SERIAL_ATMEL_PDC=y # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_RAMOOPS is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y # CONFIG_I2C_MUX is not set # CONFIG_I2C_HELPER_AUTO is not set # CONFIG_I2C_SMBUS is not set # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support # # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_DESIGNWARE is not set CONFIG_I2C_GPIO=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y # CONFIG_SPI is not set # # PPS support # # CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # # CONFIG_GPIO_BASIC_MMIO is not set # CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_VX855 is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set # CONFIG_GPIO_SX150X is not set # CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # # # SPI GPIO expanders: # # # AC97 GPIO expanders: # # # MODULbus GPIO expanders: # # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set CONFIG_WATCHDOG=y CONFIG_WATCHDOG_NOWAYOUT=y # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set CONFIG_AT91SAM9X_WATCHDOG=y # CONFIG_MAX63XX_WATCHDOG is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set # CONFIG_MFD_SUPPORT is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # # Graphics support # # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y CONFIG_SOUND=y # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y CONFIG_SND_JACK=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y CONFIG_SND_DEBUG_VERBOSE=y CONFIG_SND_PCM_XRUN_DEBUG=y # CONFIG_SND_RAWMIDI_SEQ is not set # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set # CONFIG_SND_DRIVERS is not set # CONFIG_SND_ARM is not set # # Atmel devices (AVR32 and AT91) # # CONFIG_SND_ATMEL_AC97C is not set # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_ATMEL_SOC=y CONFIG_SND_ATMEL_SOC_SSC=y CONFIG_SND_AT91_SOC_CDU=y CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_TLV320AIC3X=y # CONFIG_SOUND_PRIME is not set # CONFIG_HID_SUPPORT is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HWA_HCD is not set # CONFIG_USB_MUSB_HDRC is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_UAS is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # # USB port drivers # # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ULPI is not set # CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_AT91 is not set CONFIG_MMC_ATMELMCI=y # CONFIG_MMC_USHC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y CONFIG_LEDS_GPIO_PLATFORM=y # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set CONFIG_LEDS_TRIGGERS=y # # LED Triggers # # CONFIG_LEDS_TRIGGER_TIMER is not set CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # # iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # # SPI RTC drivers # # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_AT91SAM9=y CONFIG_RTC_DRV_AT91SAM9_RTT=0 CONFIG_RTC_DRV_AT91SAM9_GPBR=0 # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y CONFIG_EXT4_FS_XATTR=y # CONFIG_EXT4_FS_POSIX_ACL is not set # CONFIG_EXT4_FS_SECURITY is not set # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y # CONFIG_FSNOTIFY is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set # CONFIG_FANOTIFY is not set # CONFIG_QUOTA is not set # CONFIG_QUOTACTL is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # # CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y CONFIG_JFFS2_FS_WBUF_VERIFY=y # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set # # Kernel hacking # CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set # CONFIG_LOCKUP_DETECTOR is not set # CONFIG_HARDLOCKUP_DETECTOR is not set # CONFIG_DETECT_HUNG_TASK is not set CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_KMEMLEAK is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set CONFIG_BKL=y # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_INFO_REDUCED is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_DETECTOR=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_RCU_CPU_STALL_DETECTOR_RUNNABLE=y CONFIG_RCU_CPU_STALL_VERBOSE=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_PAGE_POISONING is not set CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set # CONFIG_DYNAMIC_DEBUG is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set # CONFIG_STRICT_DEVMEM is not set CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set # CONFIG_OC_ETM is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set CONFIG_DEFAULT_SECURITY_DAC=y CONFIG_DEFAULT_SECURITY="" CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # # CONFIG_CRYPTO_CBC is not set # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_XTS is not set # # Hash modes # # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set # # Ciphers # CONFIG_CRYPTO_AES=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # # Random Number Generation # CONFIG_CRYPTO_ANSI_CPRNG=y CONFIG_CRYPTO_HW=y # CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y CONFIG_GENERIC_ATOMIC64=y [5.] Most recent kernel version which did not have the bug: Linux version 2.6.35.11-cdu (prchal@prchal) (gcc version 4.4.5 (GCC) ) #50 PREEMPT Thu Mar 10 16:47:25 CET 2011 [6.] Output of Oops.. message (if applicable) with symbolic information resolved (see Documentation/oops-tracing.txt) dmesg: Linux version 2.6.37.3-cdu (prchal@prchal) (gcc version 4.4.5 (GCC) ) #17 PREEMPT Thu Mar 10 15:06:24 CET 2011 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: CDU Memory policy: ECC disabled, Data cache writeback Clocks: PLLA overclocked, 210 MHz Clocks: CPU 210 MHz, master 105 MHz, main 6.000 MHz On node 0 totalpages: 16384 free_area_init_node: node 0, pgdat c036983c, node_mem_map c037b000 Normal zone: 128 pages used for memmap Normal zone: 0 pages reserved Normal zone: 16256 pages, LIFO batch:3 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env)ro,3M(linux),-(root) rw rootfstype=jffs2 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61364k/61364k available, 4172k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc4800000 - 0xfee00000 ( 934 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0021000 ( 100 kB) .text : 0xc0021000 - 0xc034812c (3229 kB) .data : 0xc034a000 - 0xc0369ee0 ( 128 kB) Preemptable hierarchical RCU implementation. NR_IRQS:192 AT91: 96 gpio irqs in 3 banks Console: colour dummy device 80x30 console [ttyS0] enabled Calibrating delay loop... 104.44 BogoMIPS (lpj=522240) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 i2c-core: driver [dummy] registered gpio_request: gpio-128 (busadrp) status -22 gpio_export_name: gpio128 status -22 gpio_request: gpio-130 (busadr5) status -22 gpio_export_name: gpio130 status -22 gpio_request: gpio-131 (busadr4) status -22 gpio_export_name: gpio131 status -22 gpio_request: gpio-132 (busadr3) status -22 gpio_export_name: gpio132 status -22 gpio_request: gpio-133 (busadr2) status -22 gpio_export_name: gpio133 status -22 gpio_request: gpio-134 (busadr1) status -22 gpio_export_name: gpio134 status -22 gpio_request: gpio-135 (busadr0) status -22 gpio_export_name: gpio135 status -22 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c i2c-0: adapter [i2c-gpio-1] registered i2c 0-001a: uevent i2c i2c-0: client [tlv320aic3x] registered with bus id 0-001a i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL) Advanced Linux Sound Architecture Driver Version 1.0.23. Switching to clocksource pit NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 JFFS2 version 2.2. (NAND) ÂŠ 2001-2006 Red Hat, Inc. msgmni has been set to 119 io scheduler noop registered (default) atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL atmel_usart.3: ttyS3 at MMIO 0xfffb8000 (irq = 8) is a ATMEL_SERIAL atmel_usart.4: ttyS4 at MMIO 0xfffd0000 (irq = 23) is a ATMEL_SERIAL ssc ssc.0: Atmel SSC device at 0xc4890000 (irq 14) ONFI flash detected ONFI param page 0 valid NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa1 (Micron NAND 128MiB 1,8V 8-bit) Scanning device for bad blocks 5 cmdlinepart partitions found on MTD device atmel_nand Creating 5 MTD partitions on "atmel_nand": 0x000000000000-0x000000040000 : "bootstrap" mtd: Giving out device 0 to bootstrap 0x000000040000-0x0000000c0000 : "uboot" mtd: Giving out device 1 to uboot 0x0000000c0000-0x000000100000 : "env" mtd: Giving out device 2 to env 0x000000100000-0x000000400000 : "linux" mtd: Giving out device 3 to linux 0x000000400000-0x000008000000 : "root" mtd: Giving out device 4 to root PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered MACB_mii_bus: probed eth0: Atmel MACB at 0xfffc4000 irq 21 (02:00:de:ad:be:ef) eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1) ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver at91_ohci at91_ohci: AT91 OHCI at91_ohci at91_ohci: new USB bus registered, assigned bus number 1 at91_ohci at91_ohci: irq 20, io mem 0x00500000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: AT91 OHCI usb usb1: Manufacturer: Linux 2.6.37.3-cdu ohci_hcd usb usb1: SerialNumber: at91 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0 i2c /dev entries driver i2c-core: driver [dev_driver] registered i2c-dev: adapter [i2c-gpio-1] registered as minor 0 AT91SAM9 Watchdog enabled (heartbeat=15 sec, nowayout=1) Registered led device: red Registered led device: green Registered led device: yellow Registered led device: blue tlv320aic3x-codec 0-001a: probe i2c-core: driver [tlv320aic3x-codec] registered ALSA device list: No soundcards found. TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: not present rtc-at91sam9 at91_rtt.0: setting system clock to 2011-03-10 14:19:41 UTC (1299766781) gpio_request: gpio-0 (mmc_detect) status -22 gpio_request: gpio-0 (mmc_wp) status -22 atmel_mci atmel_mci: Atmel MCI controller at 0xfffa8000 irq 9, 1 slots MTDSB: lookup_bdev() returned 0 MTDSB: New superblock for device 4 ("root") mmc0: host does not support reading read-only switch. assuming write-enable. mmc0: new SDHC card at address 1234 mmcblk0: mmc0:1234 SA04G 3.67 GiB mmcblk0: p1 Empty flash at 0x02446464 ends at 0x02446800 Empty flash at 0x0244b130 ends at 0x0244b800 Empty flash at 0x029c2fb4 ends at 0x029c3000 Empty flash at 0x029c86f8 ends at 0x029c8800 Empty flash at 0x029c9ae0 ends at 0x029ca000 Empty flash at 0x029d3d54 ends at 0x029d4000 Empty flash at 0x029d933c ends at 0x029d9800 Empty flash at 0x029de144 ends at 0x029de800 Empty flash at 0x069a8020 ends at 0x069a8800 Empty flash at 0x069afdc0 ends at 0x069b0000 jffs2_scan_dirent_node(): Node CRC failed on node at 0x069b6ff0: Read 0xffffffff, calculated 0x6055a656 Empty flash at 0x069b7020 ends at 0x069b7800 Empty flash at 0x069bdf40 ends at 0x069be000 Empty flash at 0x06b84fa8 ends at 0x06b85000 VFS: Mounted root (jffs2 filesystem) on device 31:4. Freeing init memory: 100K JFFS2 notice: (1) check_node_data: wrong data CRC in data node at 0x029c9060: read 0x5bfb4489, calculated 0x299d675. EXT4-fs (mmcblk0p1): recovery complete EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) eth0: link up (100/Full) [8.] Environment [8.1.] Software (add the output of the ver_linux script here) crosscompiling [8.2.] Processor information (from /proc/cpuinfo): Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 104.44 Features : swp half thumb fastmult edsp java CPU implementer : 0x41 CPU architecture: 5TEJ CPU variant : 0x0 CPU part : 0x926 CPU revision : 5 Hardware : CDU Revision : 0000 Serial : 0000000000000000 [8.3.] Module information (from /proc/modules): all in kernel [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) 00500000-005fffff : at91_ohci 00500000-005fffff : ohci_hcd 20000000-23ffffff : System RAM 20021000-203491ab : Kernel text 2034a000-2037ac7f : Kernel data 40000000-4fffffff : atmel_nand fefff200-fefff3ff : atmel_usart.0 fefff200-fefff3ff : atmel_serial fffa8000-fffabfff : atmel_mci fffb0000-fffb3fff : atmel_usart.1 fffb0000-fffb3fff : atmel_serial fffb4000-fffb7fff : atmel_usart.2 fffb4000-fffb7fff : atmel_serial fffb8000-fffbbfff : atmel_usart.3 fffb8000-fffbbfff : atmel_serial fffbc000-fffbffff : ssc.0 fffc4000-fffc7fff : macb fffd0000-fffd3fff : atmel_usart.4 fffd0000-fffd3fff : atmel_serial ffffe800-ffffe9ff : atmel_nand fffffd20-fffffd2f : at91_rtt.0 [8.7.] Other information that might be relevant to the problem (please look in /proc and include all information that you think to be relevant): dmesg of 2.6.35.11: Linux version 2.6.35.11-cdu (prchal@prchal) (gcc version 4.4.5 (GCC) ) #48 PREEMPT Thu Mar 10 15:13:00 CET 2011 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 CPU: VIVT data cache, VIVT instruction cache Machine: CDU Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 16384 free_area_init_node: node 0, pgdat c0371cfc, node_mem_map c0390000 Normal zone: 128 pages used for memmap Normal zone: 0 pages reserved Normal zone: 16256 pages, LIFO batch:3 Clocks: PLLA overclocked, 210 MHz Clocks: CPU 210 MHz, master 105 MHz, main 6.000 MHz Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: console=ttyS0,115200 root=/dev/mtdblock4 mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env)ro,3M(linux),-(root) rw rootfstype=jffs2 PID hash table entries: 256 (order: -2, 1024 bytes) Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61320k/61320k available, 4216k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc4800000 - 0xfee00000 ( 934 MB) lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc001f000 ( 92 kB) .text : 0xc001f000 - 0xc0338000 (3172 kB) .data : 0xc034e000 - 0xc0372320 ( 145 kB) Hierarchical RCU implementation. Verbose stalled-CPUs detection is disabled. NR_IRQS:192 AT91: 96 gpio irqs in 3 banks Console: colour dummy device 80x30 console [ttyS0] enabled Calibrating delay loop... 104.44 BogoMIPS (lpj=522240) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok devtmpfs: initialized NET: Registered protocol family 16 i2c-core: driver [dummy] registered gpio_request: gpio-128 (busadrp) status -22 gpio_request: gpio-130 (busadr5) status -22 gpio_request: gpio-131 (busadr4) status -22 gpio_request: gpio-132 (busadr3) status -22 gpio_request: gpio-133 (busadr2) status -22 gpio_request: gpio-134 (busadr1) status -22 gpio_request: gpio-135 (busadr0) status -22 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb i2c i2c-0: adapter [i2c-gpio-1] registered i2c 0-001a: uevent i2c i2c-0: client [tlv320aic3x] registered with bus id 0-001a i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL) Advanced Linux Sound Architecture Driver Version 1.0.23. Switching to clocksource pit NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 JFFS2 version 2.2. (NAND) ÂŠ 2001-2006 Red Hat, Inc. msgmni has been set to 119 alg: No test for stdrng (krng) io scheduler noop registered (default) atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL atmel_usart.3: ttyS3 at MMIO 0xfffb8000 (irq = 8) is a ATMEL_SERIAL atmel_usart.4: ttyS4 at MMIO 0xfffd0000 (irq = 23) is a ATMEL_SERIAL loop: module loaded mGine mflash driver, (c) 2008 mGine Co. ssc ssc.0: Atmel SSC device at 0xc4890000 (irq 14) NAND device: Manufacturer ID: 0x2c, Chip ID: 0xa1 (Micron NAND 128MiB 1,8V 8-bit) Scanning device for bad blocks 5 cmdlinepart partitions found on MTD device atmel_nand Creating 5 MTD partitions on "atmel_nand": 0x000000000000-0x000000040000 : "bootstrap" mtd: Giving out device 0 to bootstrap 0x000000040000-0x0000000c0000 : "uboot" mtd: Giving out device 1 to uboot 0x0000000c0000-0x000000100000 : "env" mtd: Giving out device 2 to env 0x000000100000-0x000000400000 : "linux" mtd: Giving out device 3 to linux 0x000000400000-0x000008000000 : "root" mtd: Giving out device 4 to root PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered PPP MPPE Compression module registered MACB_mii_bus: probed eth0: Atmel MACB at 0xfffc4000 irq 21 (02:00:de:ad:be:ef) eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1) ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver at91_ohci at91_ohci: AT91 OHCI at91_ohci at91_ohci: new USB bus registered, assigned bus number 1 at91_ohci at91_ohci: irq 20, io mem 0x00500000 usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: AT91 OHCI usb usb1: Manufacturer: Linux 2.6.35.11-cdu ohci_hcd usb usb1: SerialNumber: at91 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0 i2c /dev entries driver i2c-core: driver [dev_driver] registered i2c-dev: adapter [i2c-gpio-1] registered as minor 0 AT91SAM9 Watchdog enabled (heartbeat=15 sec, nowayout=0) Registered led device: red Registered led device: green Registered led device: yellow Registered led device: blue aic3x I2C Codec 0-001a: probe i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 No device for DAI tlv320aic3x i2c-core: driver [aic3x I2C Codec] registered No device for DAI atmel-ssc0 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 asoc: tlv320aic3x <-> atmel-ssc0 mapping ok ALSA device list: #0: AFEB9260 (tlv320aic3x) TCP cubic registered NET: Registered protocol family 17 VFP support v0.3: not present rtc-at91sam9 at91_rtt.0: setting system clock to 2011-03-10 14:13:40 UTC (1299766420) MTDSB: lookup_bdev() returned 0 MTDSB: New superblock for device 4 ("root") Empty flash at 0x02446464 ends at 0x02446800 Empty flash at 0x0244b130 ends at 0x0244b800 Empty flash at 0x029c2fb4 ends at 0x029c3000 Empty flash at 0x029c86f8 ends at 0x029c8800 Empty flash at 0x029c9ae0 ends at 0x029ca000 Empty flash at 0x029d3d54 ends at 0x029d4000 Empty flash at 0x029d933c ends at 0x029d9800 Empty flash at 0x029de144 ends at 0x029de800 Empty flash at 0x069a8020 ends at 0x069a8800 Empty flash at 0x069afdc0 ends at 0x069b0000 jffs2_scan_dirent_node(): Node CRC failed on node at 0x069b6ff0: Read 0xffffffff, calculated 0x6055a656 Empty flash at 0x069b7020 ends at 0x069b7800 Empty flash at 0x069bdf40 ends at 0x069be000 Empty flash at 0x06b84fa8 ends at 0x06b85000 VFS: Mounted root (jffs2 filesystem) on device 31:4. devtmpfs: mounted Freeing init memory: 92K JFFS2 notice: (1) check_node_data: wrong data CRC in data node at 0x029c9060: read 0x5bfb4489, calculated 0x299d675. eth0: link up (100/Full) i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 i2c i2c-0: master_xfer[0] W, addr=0x1a, len=2 JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x06b84788: read 0x5cd0398c, calculated 0x79b2602. JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x029c7d70: read 0x6258a55d, calculated 0x7b3d45f6. JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x069a7800: read 0x5cd0398c, calculated 0xd59c68aa. JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x029d89a0: read 0x865f1b6f, calculated 0xfe6d110c. JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x029dd874: read 0xa9e45a0, calculated 0xc8106360. JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x029d2fdc: read 0x8378e0a5, calculated 0xe157d191. JFFS2 notice: (316) check_node_data: wrong data CRC in data node at 0x069af138: read 0x6009610e, calculated 0x3d3910eb. [X.] Other notes, patches, fixes, workarounds: In older version 2.6.35.11 I had to set codec to have clock on BCLK. I thing this is not good way to set it, but it works. --- tmp/linux/linux-2.6.35.11/sound/soc/codecs/tlv320aic3x.c 2011-02-06 20:04:07.000000000 +0100 +++ arm/fw-cdu/linux/linux-2.6.35.11/sound/soc/codecs/tlv320aic3x.c 2011-03-08 15:20:07.942613211 +0100 @@ -911,6 +911,12 @@ found: data = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG); + + //nastavit externi hodiny na BCLK, jinak to neumim + // melo by se nastavit jen kdyz codec ma hodiny na BCLK + aic3x_write(codec, AIC3X_CLKGEN_CTRL_REG, 0xa2); + //*** + aic3x_write(codec, AIC3X_PLL_PROGA_REG, data | (pll_p << PLLP_SHIFT)); aic3x_write(codec, AIC3X_OVRF_STATUS_AND_PLLR_REG, pll_r << PLLR_SHIFT); aic3x_write(codec, AIC3X_PLL_PROGB_REG, pll_j << PLLJ_SHIFT); Thanks for any help. -- ************************************************** Jiøí Prchal vývojový pracovník AK signal Brno, a.s. Kulkova 26 61400 Brno Czech Republic tel: +420-545 233 484 kl. 215 fax: +420-545 233 487 www.aksignal.cz IÈO: 26245507 DIÈ: CZ26245507 GPS: 49°12'55.862"N, 16°39'14.723"E **************************************************

3 4

[alsa-devel] Problem and dirty Fix for hda-intel on ALC892
by Ilya Demyanov 23 Mar '11

23 Mar '11

I confirm this bug on 2.6.38 (debian sid) for hda-intel on ALC883 my alsa-info: http://www.alsa-project.org/db/?f=de285de868e6da935a9e2aad545c7f1bc0afa2aa

1 1

[alsa-devel] [PATCH] sound/oss/midi_synth: prevent underflow, use of uninitialized value, and signedness issue
by Dan Rosenberg 23 Mar '11

23 Mar '11

The offset passed to midi_synth_load_patch() can be essentially arbitrary. If it's greater than the header length, this will result in a copy_from_user(dst, src, negative_val). While this will just return -EFAULT on x86, on other architectures this may cause memory corruption. Additionally, the length field of the sysex_info structure may not be initialized prior to its use. Finally, a signed comparison may result in an unintentionally large loop. This patch fixes all these issues, as well as some cleanup to prevent checkpatch.pl from complaining. Signed-off-by: Dan Rosenberg <drosenberg(a)vsecurity.com> Cc: stable(a)kernel.org --- sound/oss/midi_synth.c | 27 ++++++++++++++------------- 1 files changed, 14 insertions(+), 13 deletions(-) diff --git a/sound/oss/midi_synth.c b/sound/oss/midi_synth.c index 3c09374..3500f80 100644 --- a/sound/oss/midi_synth.c +++ b/sound/oss/midi_synth.c @@ -491,16 +491,18 @@ midi_synth_load_patch(int dev, int format, const char __user *addr, if (!prefix_cmd(orig_dev, 0xf0)) return 0; + /* Invalid patch format */ if (format != SYSEX_PATCH) - { -/* printk("MIDI Error: Invalid patch format (key) 0x%x\n", format);*/ return -EINVAL; - } + + /* Patch header too short */ if (count < hdr_size) - { -/* printk("MIDI Error: Patch header too short\n");*/ return -EINVAL; - } + + /* Offset too high */ + if (offs > offsetof(struct sysex_info, len) || offs < 0) + return -EINVAL; + count -= hdr_size; /* @@ -510,14 +512,13 @@ midi_synth_load_patch(int dev, int format, const char __user *addr, if(copy_from_user(&((char *) &sysex)[offs], &(addr)[offs], hdr_size - offs)) return -EFAULT; - - if (count < sysex.len) - { -/* printk(KERN_WARNING "MIDI Warning: Sysex record too short (%d<%d)\n", count, (int) sysex.len);*/ + + /* Sysex record too short */ + if ((unsigned)count < (unsigned)sysex.len) sysex.len = count; - } - left = sysex.len; - src_offs = 0; + + left = sysex.len; + src_offs = 0; for (i = 0; i < left && !signal_pending(current); i++) {

2 3

[alsa-devel] ASoC updates for 2.6.39
by Mark Brown 23 Mar '11

23 Mar '11

The following changes since commit e58a8947b0264ec1f43ce5deef563b72acf1284f: Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc (2011-03-16 12:14:46 +0100) are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.39 Marek Belisko (1): ASoC: mini2440: Fix uda134x codec problem. Mark Brown (3): Merge branch 'topic/asoc' of git://git.kernel.org/.../tiwai/sound-2.6 into for-2.6.39 ASoC: Remove bogus check for register validity in debugfs write ASoC: Support !REGULATOR build for sgtl5000 arch/arm/mach-s3c2440/mach-mini2440.c | 7 +++++++ sound/soc/codecs/sgtl5000.c | 14 ++++++++++++++ sound/soc/codecs/uda134x.c | 3 ++- sound/soc/samsung/s3c24xx_uda134x.c | 3 ++- sound/soc/soc-core.c | 2 -- 5 files changed, 25 insertions(+), 4 deletions(-)

2 1

[alsa-devel] pci/hda/patch_via.c - broken between 2.6.36 and 2.6.37 (bisected)
by Wolfgang Scheicher 23 Mar '11

23 Mar '11

After the mentioned Kernel upgrade quite a view things went wrong on my hardware ( http://www.asrock.com/mb/overview.asp?Model=890GM%20Pro3 ): * Microphone doesn't work anymore. neither the front mic nor the rear one. Tried all thinkable settings. * Increasing Microphone levels leads to some strange internal feedback. That means, at some point when the feedback starts, it just starts, but i have no clue what audio source did actually trigger it. * Touching the mixer channel "Smart 5.1" in alsamixer makes alsamicer crash. After quite some days of frustration and the inability to get help i however managed to learn how to build a kernel and how to git bisect. So this is what i did: root@Blackrock ~src/alsa-kernel (git)-[7b315bb...|bisect] # git bisect log git bisect start '--' 'sound/pci' # bad: [81a2f603f94d6da108ddd8e3535294445097f730] ALSA: ac97: replace open- coded, error-prone stuff with AC97 bit defines git bisect bad 81a2f603f94d6da108ddd8e3535294445097f730 # good: [f6f94e2ab1b33f0082ac22d71f66385a60d8157f] Linux 2.6.36 git bisect good f6f94e2ab1b33f0082ac22d71f66385a60d8157f # bad: [28c4edb71d21623f1e47422194d865d2b6712fd4] ALSA: HDA: Rename "Int Mic" to "Internal Mic" git bisect bad 28c4edb71d21623f1e47422194d865d2b6712fd4 # bad: [0e7adbe263f89ea2ef15b5af5e80a812b2a85025] ALSA: hda - Disable sticky PCM stream assignment for AD codecs git bisect bad 0e7adbe263f89ea2ef15b5af5e80a812b2a85025 # bad: [5637edb2e1c2d13b276748508ae17f319fb7f066] ALSA: HDA: Sort CXT5066 quirk table git bisect bad 5637edb2e1c2d13b276748508ae17f319fb7f066 # bad: [18675e4283f575594d55ef1239c14ab5b4de53b6] ALSA: hda - Add fixup for FSC Celsius H270 git bisect bad 18675e4283f575594d55ef1239c14ab5b4de53b6 # good: [eea7dc932bfa802ad0377755ea821f416f4f8623] ALSA: hda - Use new inputs[] field to parse input-pins for STAC/IDT codecs git bisect good eea7dc932bfa802ad0377755ea821f416f4f8623 # bad: [263d0328c46995d8e4fb478005177839104483d2] ALSA: hda - Improve input control names for IDT/STAC codecs git bisect bad 263d0328c46995d8e4fb478005177839104483d2 # bad: [9737731d64bfa64ab4fc04b46ae5b650f6432222] Merge branch 'fix/hda' into topic/hda git bisect bad 9737731d64bfa64ab4fc04b46ae5b650f6432222 # bad: [7b315bb4980448250c80a7464c256b54d546cb26] ALSA: hda - Use new inputs[] field to parse input-pins for VIA codecs git bisect bad 7b315bb4980448250c80a7464c256b54d546cb26 root@Blackrock ~src/alsa-kernel (git)-[7b315bb...|bisect] # git bisect bad 7b315bb4980448250c80a7464c256b54d546cb26 is the first bad commit commit 7b315bb4980448250c80a7464c256b54d546cb26 Author: Takashi Iwai <tiwai(a)suse.de> Date: Mon Aug 30 13:06:30 2010 +0200 ALSA: hda - Use new inputs[] field to parse input-pins for VIA codecs Signed-off-by: Takashi Iwai <tiwai(a)suse.de> :040000 040000 fb32bef12d78f90f00020cf375fddd36be1cdfbe 02f61291093ce6c7c8e7e1bd98fd87f9338702a1 M sound Oh, and here are debug infos from when i first tried to report the problem: bad: http://www.alsa-project.org/db/?f=0f29e6de98ea9fefae5c6e2adb43ff8f8eede697 good: http://www.alsa-project.org/db/?f=11290fe50066e9bcd6a244f2c83b1c66c9dd201b I hope someone can take it from here. I'm not much more than a user. Just because i managed to build a kernel doesn't mean i can fix this bug. Wolfgang Scheicher

5 13

[alsa-devel] [PATCH 1/2] ALSA: VIA HDA: Add support for VT1705
by Lydia Wang 23 Mar '11

23 Mar '11

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: VIA HDA: Add support for VT1705. Add support for VT1705 codec, which is similiar with VT1708S except it has 6 channels output. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> --- sound/pci/hda/patch_via.c | 100 ++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 87 insertions(+), 13 deletions(-) --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -3181,7 +3181,8 @@ int imux_is_smixer; unsigned int parm; int is_8ch = 0; - if (spec->codec_type != VT1708B_4CH) + if ((spec->codec_type != VT1708B_4CH) && + (codec->vendor_id != 0x11064397)) is_8ch = 1; /* SW0 (17h) = stereo mixer */ @@ -3220,6 +3221,16 @@ AC_VERB_SET_POWER_STATE, parm); snd_hda_codec_write(codec, 0x24, 0, AC_VERB_SET_POWER_STATE, parm); + } else if (codec->vendor_id == 0x11064397) { + /* PW7(23h), SW2(27h), AOW2(25h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x23, &parm); + if (spec->smart51_enabled) + set_pin_power_state(codec, 0x1a, &parm); + snd_hda_codec_write(codec, 0x27, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x25, 0, + AC_VERB_SET_POWER_STATE, parm); } /* PW 3/4/7 (1ch/1dh/23h) */ @@ -3239,7 +3250,9 @@ AC_VERB_SET_POWER_STATE, parm); snd_hda_codec_write(codec, 0x27, 0, AC_VERB_SET_POWER_STATE, parm); - } + } else if (codec->vendor_id == 0x11064397 && spec->hp_independent_mode) + snd_hda_codec_write(codec, 0x25, 0, + AC_VERB_SET_POWER_STATE, parm); } static int patch_vt1708S(struct hda_codec *codec); @@ -3414,6 +3427,18 @@ { } }; +static struct hda_verb vt1705_uniwill_init_verbs[] = { + {0x1d, AC_VERB_SET_UNSOLICITED_ENABLE, + AC_USRSP_EN | VIA_HP_EVENT | VIA_JACK_EVENT}, + {0x19, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x1a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x1b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x1e, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x23, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + { } +}; + static struct hda_pcm_stream vt1708S_pcm_analog_playback = { .substreams = 2, .channels_min = 2, @@ -3427,6 +3452,19 @@ }, }; +static struct hda_pcm_stream vt1705_pcm_analog_playback = { + .substreams = 2, + .channels_min = 2, + .channels_max = 6, + .nid = 0x10, /* NID to query formats and rates */ + .ops = { + .open = via_playback_pcm_open, + .prepare = via_playback_multi_pcm_prepare, + .cleanup = via_playback_multi_pcm_cleanup, + .close = via_pcm_open_close + }, +}; + static struct hda_pcm_stream vt1708S_pcm_analog_capture = { .substreams = 2, .channels_min = 2, @@ -3473,7 +3511,10 @@ spec->multiout.dac_nids[i] = 0x10; break; case AUTO_SEQ_CENLFE: - spec->multiout.dac_nids[i] = 0x24; + if (spec->codec->vendor_id == 0x11064397) + spec->multiout.dac_nids[i] = 0x25; + else + spec->multiout.dac_nids[i] = 0x24; break; case AUTO_SEQ_SURROUND: spec->multiout.dac_nids[i] = 0x11; @@ -3489,22 +3530,28 @@ if (cfg->line_outs == 1) { spec->multiout.num_dacs = 3; spec->multiout.dac_nids[AUTO_SEQ_SURROUND] = 0x11; - spec->multiout.dac_nids[AUTO_SEQ_CENLFE] = 0x24; + if (spec->codec->vendor_id == 0x11064397) + spec->multiout.dac_nids[AUTO_SEQ_CENLFE] = 0x25; + else + spec->multiout.dac_nids[AUTO_SEQ_CENLFE] = 0x24; } return 0; } /* add playback controls from the parsed DAC table */ -static int vt1708S_auto_create_multi_out_ctls(struct via_spec *spec, +static int vt1708S_auto_create_multi_out_ctls(struct hda_codec *codec, const struct auto_pin_cfg *cfg) { + struct via_spec *spec = codec->spec; char name[32]; static const char * const chname[4] = { "Front", "Surround", "C/LFE", "Side" }; - hda_nid_t nid_vols[] = {0x10, 0x11, 0x24, 0x25}; - hda_nid_t nid_mutes[] = {0x1C, 0x18, 0x26, 0x27}; + hda_nid_t nid_vols[2][4] = { {0x10, 0x11, 0x24, 0x25}, + {0x10, 0x11, 0x25, 0} }; + hda_nid_t nid_mutes[2][4] = { {0x1C, 0x18, 0x26, 0x27}, + {0x1C, 0x18, 0x27, 0} }; hda_nid_t nid, nid_vol, nid_mute; int i, err; @@ -3515,8 +3562,15 @@ if (!nid && i > AUTO_SEQ_CENLFE) continue; - nid_vol = nid_vols[i]; - nid_mute = nid_mutes[i]; + if (codec->vendor_id == 0x11064397) { + nid_vol = nid_vols[1][i]; + nid_mute = nid_mutes[1][i]; + } else { + nid_vol = nid_vols[0][i]; + nid_mute = nid_mutes[0][i]; + } + if (!nid_vol && !nid_mute) + continue; if (i == AUTO_SEQ_CENLFE) { /* Center/LFE */ @@ -3670,7 +3724,7 @@ if (!spec->autocfg.line_outs && !spec->autocfg.hp_pins[0]) return 0; /* can't find valid BIOS pin config */ - err = vt1708S_auto_create_multi_out_ctls(spec, &spec->autocfg); + err = vt1708S_auto_create_multi_out_ctls(codec, &spec->autocfg); if (err < 0) return err; err = vt1708S_auto_create_hp_ctls(spec, spec->autocfg.hp_pins[0]); @@ -3737,17 +3791,29 @@ } spec->init_verbs[spec->num_iverbs++] = vt1708S_volume_init_verbs; - spec->init_verbs[spec->num_iverbs++] = vt1708S_uniwill_init_verbs; + if (codec->vendor_id == 0x11064397) + spec->init_verbs[spec->num_iverbs++] = + vt1705_uniwill_init_verbs; + else + spec->init_verbs[spec->num_iverbs++] = + vt1708S_uniwill_init_verbs; if (codec->vendor_id == 0x11060440) spec->stream_name_analog = "VT1818S Analog"; + else if (codec->vendor_id == 0x11064397) + spec->stream_name_analog = "VT1705 Analog"; else spec->stream_name_analog = "VT1708S Analog"; - spec->stream_analog_playback = &vt1708S_pcm_analog_playback; + if (codec->vendor_id == 0x11064397) + spec->stream_analog_playback = &vt1705_pcm_analog_playback; + else + spec->stream_analog_playback = &vt1708S_pcm_analog_playback; spec->stream_analog_capture = &vt1708S_pcm_analog_capture; if (codec->vendor_id == 0x11060440) spec->stream_name_digital = "VT1818S Digital"; + else if (codec->vendor_id == 0x11064397) + spec->stream_name_digital = "VT1705 Digital"; else spec->stream_name_digital = "VT1708S Digital"; spec->stream_digital_playback = &vt1708S_pcm_digital_playback; @@ -3785,6 +3851,14 @@ spec->stream_name_analog = "VT1818S Analog"; spec->stream_name_digital = "VT1818S Digital"; } + /* correct names for VT1705 */ + if (codec->vendor_id == 0x11064397) { + kfree(codec->chip_name); + codec->chip_name = kstrdup("VT1705", GFP_KERNEL); + snprintf(codec->bus->card->mixername, + sizeof(codec->bus->card->mixername), + "%s %s", codec->vendor_name, codec->chip_name); + } spec->set_widgets_power_state = set_widgets_power_state_vt1708B; return 0; } @@ -6003,7 +6077,7 @@ .patch = patch_vt1708S}, { .id = 0x11063397, .name = "VT1708S", .patch = patch_vt1708S}, - { .id = 0x11064397, .name = "VT1708S", + { .id = 0x11064397, .name = "VT1705", .patch = patch_vt1708S}, { .id = 0x11065397, .name = "VT1708S", .patch = patch_vt1708S},

2 1

[alsa-devel] snd-bt87x unknown soundcard, detected but no sound.
by Grzegorz Orciuch 23 Mar '11

23 Mar '11

Hi, I've the TV card which is Kworld KW-TV878RF and tv module bttv gives the vision well. It registers also the sound device in lspci -vv: ---- 01:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 3 Region 0: Memory at f8000000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data pcilib: sysfs_read_vpd: read failed: Connection timed out Not readable Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- ----- then I load the module snd-bt87x with no argument, then it says the card is not detected. Then I load the module as "modprobe snd-bt87x load_all=1 digital_rate=44100" (also 32k is not giving sound) ---- ALSA sound/pci/bt87x.c:866: unknown card 0x878-0x00:0x00 ALSA sound/pci/bt87x.c:869: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel(a)alsa-project.org> Bt87x 0000:01:08.1: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ALSA sound/pci/bt87x.c:937: bt87x0: Using board 0, analog, digital (rate 44100 Hz) ----- Can you somehow help me ? Now I'm going to connect audio-out with soundblaster line-in, as workaround. BR, Gregory

1 0

[alsa-devel] ALC888 model detection on MSI GX740 laptop
by K900 23 Mar '11

23 Mar '11

Filed everything in the bugtracker. https://bugtrack.alsa-project.org/alsa-bug/view.php?id=5321 If you need any more info, email me or comment there.

2 1

[alsa-devel] [PATCH 2/2] ALSA: VIA HDA: Add support for VT1802
by Lydia Wang 23 Mar '11

23 Mar '11

From: Lydia Wang <lydiawang(a)viatech.com.cn> Subject: ALSA: VIA HDA: Add support for VT1802. Add support for VT1802 codec, which is similiar with VT2002P except VT1802 has no Class-D and has some different pin widget id. Signed-off-by: Lydia Wang <lydiawang(a)viatech.com.cn> --- sound/pci/hda/patch_via.c | 195 ++++++++++++++++++++++++++++++++++++++-------- 1 file changed, 163 insertions(+), 32 deletions(-) --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -98,9 +98,15 @@ VT1716S, VT2002P, VT1812, + VT1802, CODEC_TYPES, }; +#define VT2002P_COMPATIBLE(spec) \ + ((spec)->codec_type == VT2002P ||\ + (spec)->codec_type == VT1812 ||\ + (spec)->codec_type == VT1802) + struct via_spec { /* codec parameterization */ struct snd_kcontrol_new *mixers[6]; @@ -221,6 +227,8 @@ codec_type = VT1812; else if (dev_id == 0x0440) codec_type = VT1708S; + else if ((dev_id & 0xfff) == 0x446) + codec_type = VT1802; else codec_type = UNKNOWN; return codec_type; @@ -749,8 +757,7 @@ || spec->codec_type == VT1702 || spec->codec_type == VT1718S || spec->codec_type == VT1716S - || spec->codec_type == VT2002P - || spec->codec_type == VT1812) { + || VT2002P_COMPATIBLE(spec)) { activate_ctl(codec, "Headphone Playback Volume", spec->hp_independent_mode); activate_ctl(codec, "Headphone Playback Switch", @@ -788,6 +795,7 @@ nid = 0x34; break; case VT2002P: + case VT1802: nid = 0x35; break; case VT1812: @@ -1071,6 +1079,7 @@ break; case VT2002P: case VT1812: + case VT1802: nid_mixer = 0x21; start_idx = 0; end_idx = 2; @@ -1135,6 +1144,7 @@ break; case VT2002P: case VT1812: + case VT1802: verb = 0xf93; parm = enable ? 0x00 : 0xe0; /* 0x00: 4/40x, 0xe0: 1x */ break; @@ -2151,7 +2161,8 @@ via_auto_init_multi_out(codec); via_auto_init_hp_out(codec); via_auto_init_analog_input(codec); - if (spec->codec_type == VT2002P || spec->codec_type == VT1812) { + + if (VT2002P_COMPATIBLE(spec)) { via_hp_bind_automute(codec); } else { via_hp_automute(codec); @@ -5291,6 +5302,57 @@ {0x1, 0xfb8, 0x88}, { } }; +static struct hda_verb vt1802_volume_init_verbs[] = { + /* + * Unmute ADC0-1 and set the default input to mic-in + */ + {0x8, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x9, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + + /* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback + * mixer widget + */ + /* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */ + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, + + /* MUX Indices: Mic = 0 */ + {0x1e, AC_VERB_SET_CONNECT_SEL, 0}, + {0x1f, AC_VERB_SET_CONNECT_SEL, 0}, + + /* PW9 Output enable */ + {0x2d, AC_VERB_SET_PIN_WIDGET_CONTROL, AC_PINCTL_OUT_EN}, + + /* Enable Boost Volume backdoor */ + {0x1, 0xfb9, 0x24}, + + /* MW0/1/4/8: un-mute index 0 (MUXx), un-mute index 1 (MW9) */ + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + {0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)}, + + /* set MUX0/1/4/8 = 0 (AOW0) */ + {0x34, AC_VERB_SET_CONNECT_SEL, 0}, + {0x35, AC_VERB_SET_CONNECT_SEL, 0}, + {0x38, AC_VERB_SET_CONNECT_SEL, 0}, + {0x3c, AC_VERB_SET_CONNECT_SEL, 0}, + + /* set PW0 index=0 (MW0) */ + {0x24, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Enable AOW0 to MW9 */ + {0x1, 0xfb8, 0x88}, + { } +}; static struct hda_verb vt2002P_uniwill_init_verbs[] = { @@ -5303,6 +5365,16 @@ {0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, { } }; +static struct hda_verb vt1802_uniwill_init_verbs[] = { + {0x25, AC_VERB_SET_UNSOLICITED_ENABLE, + AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT}, + {0x28, AC_VERB_SET_UNSOLICITED_ENABLE, + AC_USRSP_EN | VIA_JACK_EVENT | VIA_BIND_HP_EVENT}, + {0x29, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x2a, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + {0x2b, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | VIA_JACK_EVENT}, + { } +}; static struct hda_pcm_stream vt2002P_pcm_analog_playback = { .substreams = 2, @@ -5359,10 +5431,15 @@ const struct auto_pin_cfg *cfg) { int err; + hda_nid_t sw_nid; if (!cfg->line_out_pins[0]) return -1; + if (spec->codec_type == VT1802) + sw_nid = 0x28; + else + sw_nid = 0x26; /* Line-Out: PortE */ err = via_add_control(spec, VIA_CTL_WIDGET_VOL, @@ -5372,7 +5449,7 @@ return err; err = via_add_control(spec, VIA_CTL_WIDGET_BIND_PIN_MUTE, "Master Front Playback Switch", - HDA_COMPOSE_AMP_VAL(0x26, 3, 0, HDA_OUTPUT)); + HDA_COMPOSE_AMP_VAL(sw_nid, 3, 0, HDA_OUTPUT)); if (err < 0) return err; @@ -5507,21 +5584,41 @@ /* AOW0 (8h)*/ snd_hda_codec_write(codec, 0x8, 0, AC_VERB_SET_POWER_STATE, parm); - /* PW4 (26h), MW4 (1ch), MUX4(37h) */ - parm = AC_PWRST_D3; - set_pin_power_state(codec, 0x26, &parm); - snd_hda_codec_write(codec, 0x1c, 0, - AC_VERB_SET_POWER_STATE, parm); - snd_hda_codec_write(codec, 0x37, 0, - AC_VERB_SET_POWER_STATE, parm); + if (spec->codec_type == VT1802) { + /* PW4 (28h), MW4 (18h), MUX4(38h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x28, &parm); + snd_hda_codec_write(codec, 0x18, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x38, 0, + AC_VERB_SET_POWER_STATE, parm); + } else { + /* PW4 (26h), MW4 (1ch), MUX4(37h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x26, &parm); + snd_hda_codec_write(codec, 0x1c, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x37, 0, + AC_VERB_SET_POWER_STATE, parm); + } - /* PW1 (25h), MW1 (19h), MUX1(35h), AOW1 (9h) */ - parm = AC_PWRST_D3; - set_pin_power_state(codec, 0x25, &parm); - snd_hda_codec_write(codec, 0x19, 0, - AC_VERB_SET_POWER_STATE, parm); - snd_hda_codec_write(codec, 0x35, 0, - AC_VERB_SET_POWER_STATE, parm); + if (spec->codec_type == VT1802) { + /* PW1 (25h), MW1 (15h), MUX1(35h), AOW1 (9h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x25, &parm); + snd_hda_codec_write(codec, 0x15, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x35, 0, + AC_VERB_SET_POWER_STATE, parm); + } else { + /* PW1 (25h), MW1 (19h), MUX1(35h), AOW1 (9h) */ + parm = AC_PWRST_D3; + set_pin_power_state(codec, 0x25, &parm); + snd_hda_codec_write(codec, 0x19, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x35, 0, + AC_VERB_SET_POWER_STATE, parm); + } if (spec->hp_independent_mode) snd_hda_codec_write(codec, 0x9, 0, @@ -5534,22 +5631,35 @@ parm = AC_PWRST_D3; set_pin_power_state(codec, 0x24, &parm); parm = present ? AC_PWRST_D3 : AC_PWRST_D0; - snd_hda_codec_write(codec, 0x18, 0, - AC_VERB_SET_POWER_STATE, parm); + if (spec->codec_type == VT1802) + snd_hda_codec_write(codec, 0x14, 0, + AC_VERB_SET_POWER_STATE, parm); + else + snd_hda_codec_write(codec, 0x18, 0, + AC_VERB_SET_POWER_STATE, parm); snd_hda_codec_write(codec, 0x34, 0, AC_VERB_SET_POWER_STATE, parm); /* Mono Out */ present = snd_hda_jack_detect(codec, 0x26); parm = present ? AC_PWRST_D3 : AC_PWRST_D0; - /* PW15 (31h), MW8(17h), MUX8(3bh) */ - snd_hda_codec_write(codec, 0x31, 0, - AC_VERB_SET_POWER_STATE, parm); - snd_hda_codec_write(codec, 0x17, 0, - AC_VERB_SET_POWER_STATE, parm); - snd_hda_codec_write(codec, 0x3b, 0, - AC_VERB_SET_POWER_STATE, parm); - + if (spec->codec_type == VT1802) { + /* PW15 (33h), MW8(1ch), MUX8(3ch) */ + snd_hda_codec_write(codec, 0x33, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x1c, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x3c, 0, + AC_VERB_SET_POWER_STATE, parm); + } else { + /* PW15 (31h), MW8(17h), MUX8(3bh) */ + snd_hda_codec_write(codec, 0x31, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x17, 0, + AC_VERB_SET_POWER_STATE, parm); + snd_hda_codec_write(codec, 0x3b, 0, + AC_VERB_SET_POWER_STATE, parm); + } /* MW9 (21h) */ if (imux_is_smixer || !is_aa_path_mute(codec)) snd_hda_codec_write(codec, 0x21, 0, @@ -5580,14 +5690,31 @@ "from BIOS. Using genenic mode...\n"); } - spec->init_verbs[spec->num_iverbs++] = vt2002P_volume_init_verbs; - spec->init_verbs[spec->num_iverbs++] = vt2002P_uniwill_init_verbs; + if (spec->codec_type == VT1802) + spec->init_verbs[spec->num_iverbs++] = + vt1802_volume_init_verbs; + else + spec->init_verbs[spec->num_iverbs++] = + vt2002P_volume_init_verbs; - spec->stream_name_analog = "VT2002P Analog"; + if (spec->codec_type == VT1802) + spec->init_verbs[spec->num_iverbs++] = + vt1802_uniwill_init_verbs; + else + spec->init_verbs[spec->num_iverbs++] = + vt2002P_uniwill_init_verbs; + + if (spec->codec_type == VT1802) + spec->stream_name_analog = "VT1802 Analog"; + else + spec->stream_name_analog = "VT2002P Analog"; spec->stream_analog_playback = &vt2002P_pcm_analog_playback; spec->stream_analog_capture = &vt2002P_pcm_analog_capture; - spec->stream_name_digital = "VT2002P Digital"; + if (spec->codec_type == VT1802) + spec->stream_name_digital = "VT1802 Digital"; + else + spec->stream_name_digital = "VT2002P Digital"; spec->stream_digital_playback = &vt2002P_pcm_digital_playback; if (!spec->adc_nids && spec->input_mux) { @@ -6118,6 +6245,10 @@ { .id = 0x11060448, .name = "VT1812", .patch = patch_vt1812}, { .id = 0x11060440, .name = "VT1818S", .patch = patch_vt1708S}, + { .id = 0x11060446, .name = "VT1802", + .patch = patch_vt2002P}, + { .id = 0x11068446, .name = "VT1802", + .patch = patch_vt2002P}, {} /* terminator */ };

1 0