December 2010 - Alsa-devel - mailman.alsa-project.org

01 Dec '10

Hi. My name is Jose. The maya44 (pci) seems to be supported in snd-ice17xx drivers. But the new maya44e (pci express) is "only" recognized in my system as: root@debian:/home/co# lspci -vvv -s 04:00.0 04:00.0 Multimedia audio controller: Device 19fe:7000 (rev 03) Subsystem: Device 0e51:0001 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (40000ns max) Interrupt: pin A routed to IRQ 7 Region 0: Memory at fd9fc000 (32-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- I would like to help to make this card work. Best regards. Jose.

2 2

[alsa-devel] [PATCH 0/2] ASoC: sh: fsi-ak4642: modify patches
by Kuninori Morimoto 01 Dec '10

01 Dec '10

Dear Mark, Liam These are FSI-AK4642 modify patches. Kuninori Morimoto (2): ASoC: sh: fsi-ak4642: tidyup unnecessary variables ASoC: sh: fsi-ak4642: midify card name BTW, current Mark's for-2.6.38 branch has below issue ? ---------------------- /linux-2.6/sound/soc/soc-core.c: In function 'soc_probe_aux_dev': /linux-2.6/sound/soc/soc-core.c:1647: error: 'struct snd_soc_dapm_context' has no member named 'list' /linux-2.6/sound/soc/soc-core.c:1647: error: 'struct snd_soc_card' has no member named 'dapm_list' make[4]: *** [sound/soc/soc-core.o] Error 1 make[4]: *** Waiting for unfinished jobs.... ---------------------- Best regards -- Kuninori Morimoto

3 4

[alsa-devel] [PATCH] ASoC: Fix build failure in soc-core.c
by Jarkko Nikula 01 Dec '10

01 Dec '10

Commit 2eea392 "ASoC: Add support for optional auxiliary dailess codecs" causes a build failure in soc-core.c: soc_probe_aux_dev since code tries to access non-existing struct snd_soc_dapm_context and struct snd_soc_card members. Root cause for this was a double accident. Author sent the RFC patch from top of another patch set and the RFC got committed. Fix the build failure by removing the code line that depends on that another patch set. Signed-off-by: Jarkko Nikula <jhnikula(a)gmail.com> --- sound/soc/soc-core.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a7670d5..eb950f7 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1644,7 +1644,6 @@ static int soc_probe_aux_dev(struct snd_soc_card *card, int num) /* mark codec as probed and add to card codec list */ codec->probed = 1; list_add(&codec->card_list, &card->codec_dev_list); - list_add(&codec->dapm.list, &card->dapm_list); /* now that all clients have probed, initialise the DAI link */ if (aux_dev->init) { -- 1.7.2.3

3 2

[alsa-devel] [PATCH] ASoC: WM8731: Fix incorrect mask for bypass path disable
by Dimitris Papastamos 01 Dec '10

01 Dec '10

According to the datasheet the bypass path enable/disable is bit 3 therefore we need 0x8 and not 0x4. Signed-off-by: Dimitris Papastamos <dp(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8731.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c index a104145..94e0cf3 100644 --- a/sound/soc/codecs/wm8731.c +++ b/sound/soc/codecs/wm8731.c @@ -526,7 +526,7 @@ static int wm8731_probe(struct snd_soc_codec *codec) snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0); /* Disable bypass path by default */ - snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0); + snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0); snd_soc_add_controls(codec, wm8731_snd_controls, ARRAY_SIZE(wm8731_snd_controls)); -- 1.7.3.2

3 2

[alsa-devel] [PATCH 1/5] [RFC]intel_hdmi_audio:include header
by ramesh.babu＠intel.com 01 Dec '10

01 Dec '10

From: Ramesh Babu K V <ramesh.babu(a)intel.com> This patch creates intel_mid_hdmi_audio.h file. This file contains Intel MID platform specific HDMI Audio register definitions, enums and structure definitions used in this driver. This also exposes interface function. Signed-off-by: Ramesh Babu K V <ramesh.babu(a)intel.com> Signed-off-by: Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com> --- .../drivers/intel_mid_hdmi/intel_mid_hdmi_audio.h | 424 ++++++++++++++++++++ 1 files changed, 424 insertions(+), 0 deletions(-) create mode 100644 sound/drivers/intel_mid_hdmi/intel_mid_hdmi_audio.h diff --git a/sound/drivers/intel_mid_hdmi/intel_mid_hdmi_audio.h b/sound/drivers/intel_mid_hdmi/intel_mid_hdmi_audio.h new file mode 100644 index 0000000..19e47ee --- /dev/null +++ b/sound/drivers/intel_mid_hdmi/intel_mid_hdmi_audio.h @@ -0,0 +1,424 @@ +/* + * intel_mid_hdmi_audio.h - Intel HDMI audio driver for MID + * + * Copyright (C) 2010 Intel Corp + * Authors: Sailaja Bandarupalli <sailaja.bandarupalli(a)intel.com> + * Ramesh Babu K V <ramesh.babu(a)intel.com> + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * ALSA driver for Intel MID HDMI audio controller + */ +#ifndef __INTEL_MID_HDMI_AUDIO_H +#define __INTEL_MID_HDMI_AUDIO_H + +#include <linux/types.h> +#include <sound/initval.h> +#include "../../../drivers/staging/mrst/drv/mdfld_hdmi_audio_if.h" +#include "../../../drivers/staging/mrst/drv/psb_intel_hdmi.h" + +#define HAD_DRIVER_VERSION "0.01.002" +#define HAD_MAX_DEVICES 1 +#define HAD_MIN_CHANNEL 1 +#define HAD_MAX_CHANNEL 8 +#define HAD_NUM_OF_RING_BUFS 4 +#define HAD_MIN_RATE 32000 +#define HAD_MAX_RATE 192000 +#define HAD_MAX_BUFFER (800*1024) +#define HAD_MIN_BUFFER (800*1024) +#define HAD_MAX_PERIODS 4 +#define HAD_MIN_PERIODS 1 +#define HAD_MAX_PERIOD_BYTES HAD_MAX_BUFFER +#define HAD_MIN_PERIOD_BYTES 32 +#define HAD_FIFO_SIZE 0 /* fifo not being used */ + +#define AUD_SAMPLE_RATE_32 HAD_MIN_RATE +#define AUD_SAMPLE_RATE_44_1 44100 +#define AUD_SAMPLE_RATE_48 48000 +#define AUD_SAMPLE_RATE_88_2 88200 +#define AUD_SAMPLE_RATE_96 96000 +#define AUD_SAMPLE_RATE_176_4 176400 +#define AUD_SAMPLE_RATE_192 HAD_MAX_RATE + +#define DRIVER_NAME "intelmid_hdmi_audio" +#define DIS_SAMPLE_RATE_25_2 25200 +#define DIS_SAMPLE_RATE_27 27000 +#define DIS_SAMPLE_RATE_54 54000 +#define DIS_SAMPLE_RATE_74_25 74250 +#define DIS_SAMPLE_RATE_148_5 148500 +#define REG_BIT_0 0x1 +#define REG_BIT_1 0x2 +#define REG_BIT_2 0x4 +#define REG_BIT_3 0x8 +#define REG_BIT_20 0x100000 +#define SET_BIT0 1 +#define CLEAR_BIT0 0 +#define REG_WIDTH 0x08 +#define MAX_HW_BUFS 0x04 +#define MAX_DIP_WORDS 16 +#define MAX_PERIODS 4 +#define INTEL_HAD "INTEL_HAD" + +/** + * enum had_status - Audio stream states + * + * @STREAM_INIT: Stream initialized + * @STREAM_RUNNING: Stream running + * @STREAM_PAUSED: Stream paused + * @STREAM_DROPPED: Stream dropped + * */ +enum had_stream_status { + STREAM_INIT = 0, + STREAM_RUNNING = 1, + STREAM_PAUSED = 2, + STREAM_DROPPED = 3 +}; + +/** + * enum intel_had_aud_buf_type - HDMI controller ring buffer types + * + * @HAD_BUF_TYPE_A: ring buffer A + * @HAD_BUF_TYPE_B: ring buffer B + * @HAD_BUF_TYPE_C: ring buffer C + * @HAD_BUF_TYPE_D: ring buffer D + */ +enum intel_had_aud_buf_type { + HAD_BUF_TYPE_A = 0, + HAD_BUF_TYPE_B = 1, + HAD_BUF_TYPE_C = 2, + HAD_BUF_TYPE_D = 3, +}; + +enum num_aud_ch { + CH_STEREO = 0, + CH_THREE_FOUR = 1, + CH_FIVE_SIX = 2, + CH_SEVEN_EIGHT = 3 +}; + +/*HDMI controller register offsets*/ +enum hdmi_ctrl_reg { + AUD_CONFIG = 0x69000, + AUD_CH_STATUS_0 = 0x69008, + AUD_CH_STATUS_1 = 0x6900C, + AUD_HDMI_CTS = 0x69010, + AUD_N_ENABLE = 0x69014, + AUD_SAMPLE_RATE = 0x69018, + AUD_BUF_CONFIG = 0x69020, + AUD_BUF_CH_SWAP = 0x69024, + AUD_BUF_A_ADDR = 0x69040, + AUD_BUF_A_LENGTH = 0x69044, + AUD_BUF_B_ADDR = 0x69048, + AUD_BUF_B_LENGTH = 0x6904c, + AUD_BUF_C_ADDR = 0x69050, + AUD_BUF_C_LENGTH = 0x69054, + AUD_BUF_D_ADDR = 0x69058, + AUD_BUF_D_LENGTH = 0x6905c, + AUD_CNTL_ST = 0x69060, + AUD_HDMI_STATUS = 0x69068, + AUD_HDMIW_INFOFR = 0x69114, +}; +/** + * union aud_cfg - Audio configuration offset - 69000 + * + * @cfg_regx: individual register bits + * @cfg_regval: full register value + * + * */ +union aud_cfg { + struct { + u32 aud_en:1; + u32 layout:1; + u32 fmt:2; + u32 num_ch:2; + u32 rsvd0:1; + u32 set:1; + u32 flat:1; + u32 val_bit:1; + u32 user_bit:1; + u32 underrun:1; + u32 rsvd1:20; + } cfg_regx; + u32 cfg_regval; +}; +/** + * union aud_ch_status_0 - Audio Channel Status 0 Attributes offset - 0x69008 + * + * @status_0_regx:individual register bits + * @status_0_regval:full register value + * + * */ +union aud_ch_status_0 { + struct { + u32 ch_status:1; + u32 lpcm_id:1; + u32 cp_info:1; + u32 format:3; + u32 mode:2; + u32 ctg_code:8; + u32 src_num:4; + u32 ch_num:4; + u32 samp_freq:4; + u32 clk_acc:2; + u32 rsvd:2; + } status_0_regx; + u32 status_0_regval; +}; + +/** + * union aud_ch_status_1 - Audio Channel Status 1 Attributes offset - 0x6900c + * + * @status_1_regx: individual register bits + * @status_1_regval: full register value + * + **/ +union aud_ch_status_1 { + struct { + u32 max_wrd_len:1; + u32 wrd_len:3; + u32 rsvd:28; + } status_1_regx; + u32 status_1_regval; +}; + +/** + * union aud_hdmi_cts - CTS register offset -0x69010 + * + * @cts_regx: individual register bits + * @cts_regval: full register value + * + * */ +union aud_hdmi_cts { + struct { + u32 cts_val:20; + u32 en_cts_prog:1; + u32 rsvd:11; + } cts_regx; + u32 cts_regval; +}; + +/** + * union aud_hdmi_n_enable - N register offset -0x69014 + * + * @n_regx: individual register bits + * @n_regval: full register value + * +*/ +union aud_hdmi_n_enable { + struct { + u32 n_val:20; + u32 en_n_prog:1; + u32 rsvd:11; + } n_regx; + u32 n_regval; +}; + +/** + * union aud_buf_config - Audio Buffer configurations offset -0x69020 + * + * @buf_cfg_regx: individual register bits + * @buf_cfgval: full register value + * +*/ +union aud_buf_config { + struct { + u32 fifo_width:8; + u32 rsvd0:8; + u32 aud_delay:8; + u32 rsvd1:8; + } buf_cfg_regx; + u32 buf_cfgval; +}; + +/** + * union aud_buf_ch_swap - Audio Sample Swapping offset - 0x69024 + * + * @buf_ch_swap_regx: individual register bits + * @buf_ch_swap_val: full register value + * + * */ +union aud_buf_ch_swap { + struct { + u32 first_0:3; + u32 second_0:3; + u32 first_1:3; + u32 second_1:3; + u32 first_2:3; + u32 second_2:3; + u32 first_3:3; + u32 second_3:3; + u32 rsvd:8; + } buf_ch_swap_regx; + u32 buf_ch_swap_val; +}; + +/** + * union aud_buf_addr - Address for Audio Buffer + * + * @buf_addr_regx: individual register bits + * @buf_addr_val: full register value + * + * */ +union aud_buf_addr { + struct { + u32 valid:1; + u32 intr_en:1; + u32 rsvd:4; + u32 addr:26; + } buf_addr_regx; + u32 buf_addr_val; +}; +/** + * union aud_buf_len - Length of Audio Buffer + * + * @buf_len_regx: individual register bits + * @buf_len_val: full register value + * + * */ +union aud_buf_len { + struct { + u32 buf_len:20; + u32 rsvd:12; + } buf_len_regx; + u32 buf_len_val; +}; + +/** + * union aud_ctrl_st - Audio Control State Register offset 0x69060 + * + * @ctrl_regx: individual register bits + * @ctrl_val: full register value + * + * */ +union aud_ctrl_st { + struct { + u32 ram_addr:4; + u32 eld_ack:1; + u32 eld_addr:4; + u32 eld_buf_size:5; + u32 eld_valid:1; + u32 cp_ready:1; + u32 dip_freq:2; + u32 dip_idx:3; + u32 dip_en_sta:4; + u32 rsvd:7; + } ctrl_regx; + u32 ctrl_val; +}; +/** + * union aud_info_frame1 - Audio HDMI Widget Data Island Packet offset 0x69114 + * + * @fr1_regx: individual register bits + * @fr1_val: full register value + * + * */ +union aud_info_frame1 { + struct { + u32 pkt_type:8; + u32 ver_num:8; + u32 len:5; + u32 rsvd:11; + } fr1_regx; + u32 fr1_val; +}; +/** + * union aud_info_frame2 - DIP frame 2 + * + * @fr2_regx: individual register bits + * @fr2_val: full register value + * + */ +union aud_info_frame2 { + struct { + u32 chksum:8; + u32 chnl_cnt:3; + u32 rsvd0:1; + u32 coding_type:4; + u32 smpl_size:2; + u32 smpl_freq:3; + u32 rsvd1:3; + u32 format:8; + } fr2_regx; + u32 fr2_val; +}; +/** + * union aud_info_frame3 - DIP frame 3 + * + * @fr3_regx: individual register bits + * @fr3_val: full register value + * + */ +union aud_info_frame3 { + struct { + u32 chnl_alloc:8; + u32 rsvd0:3; + u32 lsv:4; + u32 dm_inh:1; + u32 rsvd1:16; + } fr3_regx; + u32 fr3_val; +}; + + +struct pcm_stream_info { + int str_id; + void *had_substream; + void (*period_elapsed) (void *had_substream); + u32 buffer_ptr; + u64 buffer_rendered; + u32 ring_buf_size; + int sfreq; +}; + +struct ring_buf_info { + uint32_t buf_addr; + uint32_t buf_size; + uint8_t is_valid; +}; + +struct had_stream_pvt { + enum had_stream_status stream_status; + int stream_ops; + struct snd_pcm_substream *substream; + ssize_t dbg_cum_bytes; +}; + +struct had_callback_ops { + had_event_call_back intel_had_event_call_back; +}; + +/*HAD Driver context*/ +struct snd_intelhad { + struct snd_card *card; /*holds details of snd_card*/ + int card_index; /*card index in alsa*/ + char *card_id; /*name of card*/ + /*holds regsiters read/write callbacks*/ + struct hdmi_audio_registers_ops *reg_ops; + /*holds caps get/set callbacks*/ + struct hdmi_audio_query_set_ops *query_ops; + int playback_cnt; + struct ring_buf_info buf_info[HAD_NUM_OF_RING_BUFS]; + struct pcm_stream_info stream_info; + hdmi_eeld_t eeld; + enum intel_had_aud_buf_type curr_buf; + int valid_buf_cnt; +}; +int had_event_handler(enum had_event_type event_type, void *data); +extern struct snd_intelhad *intelhaddata; +extern struct snd_pcm_ops snd_intelhad_playback_ops; +extern int hdmi_card_index; +extern char *hdmi_card_id; +#endif -- 1.6.2.5

5 21

[alsa-devel] [PATCH] ASoC: ak4535: Improve readability for setting mute
by Axel Lin 01 Dec '10

01 Dec '10

The mute/unmute is controled by SMUTE (Soft Mute Control bit): 0: Normal Operation (Default) 1: DAC outputs soft-muted I think this change improves readability. Signed-off-by: Axel Lin <axel.lin(a)gmail.com> --- sound/soc/codecs/ak4535.c | 10 +++++----- 1 files changed, 5 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/ak4535.c b/sound/soc/codecs/ak4535.c index 7367545..8b38739 100644 --- a/sound/soc/codecs/ak4535.c +++ b/sound/soc/codecs/ak4535.c @@ -366,9 +366,9 @@ static int ak4535_set_dai_fmt(struct snd_soc_dai *codec_dai, static int ak4535_mute(struct snd_soc_dai *dai, int mute) { struct snd_soc_codec *codec = dai->codec; - u16 mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC) & 0xffdf; + u16 mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC); if (!mute) - ak4535_write(codec, AK4535_DAC, mute_reg); + ak4535_write(codec, AK4535_DAC, mute_reg & ~0x20); else ak4535_write(codec, AK4535_DAC, mute_reg | 0x20); return 0; @@ -381,11 +381,11 @@ static int ak4535_set_bias_level(struct snd_soc_codec *codec, switch (level) { case SND_SOC_BIAS_ON: - mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC) & 0xffdf; - ak4535_write(codec, AK4535_DAC, mute_reg); + mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC); + ak4535_write(codec, AK4535_DAC, mute_reg & ~0x20); break; case SND_SOC_BIAS_PREPARE: - mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC) & 0xffdf; + mute_reg = ak4535_read_reg_cache(codec, AK4535_DAC); ak4535_write(codec, AK4535_DAC, mute_reg | 0x20); break; case SND_SOC_BIAS_STANDBY: -- 1.7.2

2 1

[alsa-devel] [PATCH 1/2] ASoC: Correct event flags for WM8958 AIF DACs
by Mark Brown 01 Dec '10

01 Dec '10

We need a post notification as we need to shut down the MBC after the data stops flowing rather than before. Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm8994.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index e4aab94..c9e5f38 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1205,10 +1205,10 @@ SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", "AIF1 Capture", 0, WM8994_POWER_MANAGEMENT_4, 8, 0), SND_SOC_DAPM_AIF_IN_E("AIF1DAC1L", NULL, 0, WM8994_POWER_MANAGEMENT_5, 9, 0, wm8958_aif_ev, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_IN_E("AIF1DAC1R", NULL, 0, WM8994_POWER_MANAGEMENT_5, 8, 0, wm8958_aif_ev, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_OUT("AIF1ADC2L", "AIF1 Capture", 0, WM8994_POWER_MANAGEMENT_4, 11, 0), @@ -1216,10 +1216,10 @@ SND_SOC_DAPM_AIF_OUT("AIF1ADC2R", "AIF1 Capture", 0, WM8994_POWER_MANAGEMENT_4, 10, 0), SND_SOC_DAPM_AIF_IN_E("AIF1DAC2L", NULL, 0, WM8994_POWER_MANAGEMENT_5, 11, 0, wm8958_aif_ev, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_IN_E("AIF1DAC2R", NULL, 0, WM8994_POWER_MANAGEMENT_5, 10, 0, wm8958_aif_ev, - SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), + SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_MIXER("AIF1ADC1L Mixer", SND_SOC_NOPM, 0, 0, aif1adc1l_mix, ARRAY_SIZE(aif1adc1l_mix)), -- 1.7.1

2 2

[alsa-devel] Unable to open CAPTURE device
by Irfan Shaikh 01 Dec '10

01 Dec '10

Hello, I have connected ipod to my hardware (using USB) and i want to read the audio pcm data from ipod. I am running following section of code to detect connection of ipod. But i am not finding any capture device connected. Am i giving some wrong name of capture device ? If wrong how can i find correct name of Audio Capture device. /***********************************************************************************************************************************************/ const char *capture_device="plughw:1,0"; while((retVal = snd_pcm_open( &pcm_capture, (const char *)capture_device, SND_PCM_STREAM_CAPTURE, 1))!=0) { if (retVal != 0){ printf("Opening Capture device FAILED\n"); printf("Still waiting for Capture device to be connected\n"); usleep(5000); } } /***********************************************************************************************************************************************/ OUTPUT : Opening Capture device FAILED Still waiting for Capture device to be connected ALSA lib pcm_hw.c:1433:(_snd_pcm_hw_open) Invalid value for card Opening Capture device FAILED Still waiting for Capture device to be connected ALSA lib pcm_hw.c:1433:(_snd_pcm_hw_open) Invalid value for card Opening Capture device FAILED Still waiting for Capture device to be connected ALSA lib pcm_hw.c:1433:(_snd_pcm_hw_open) Invalid value for card Opening Capture device FAILED Still waiting for Capture device to be connected ALSA lib pcm_hw.c:1433:(_snd_pcm_hw_open) Invalid value for card Opening Capture device FAILED Still waiting for Capture device to be connected . . . . . . . /*Continues*/ . . . . . . . . . . . . . Regards SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email. Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html

2 4