April 2009 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] ASoC updates for 2.6.30
by Mark Brown 24 Apr '09

24 Apr '09

The following changes since commit a1992db55d80297544a65160ddb98afba45f7759: Takashi Iwai (1): ASoC: remove non-existing referece to CONFIG_SND_SOC_CODEC_WM8991 are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git for-2.6.30 Mark Brown (4): ASoC: Fix offset of freqmode in WM8580 PLL configuration ASoC: Fix WM8580 volume update handling for large register changes Merge commit 'takashi/fix/asoc' into for-2.6.30 ASoC: s3c-i2s-v2 needs to declare a license for modular builds sound/soc/codecs/wm8580.c | 16 ++++++++++------ sound/soc/s3c24xx/s3c-i2s-v2.c | 3 ++- 2 files changed, 12 insertions(+), 7 deletions(-)

2 4

[alsa-devel] trouble with alsa, wolfson, and TI OMAP35xx McBSP
by twebb 23 Apr '09

23 Apr '09

I'm having difficulties getting a Wolfson codec running on McBSP1 of an OMAP 35xx. Here are the particulars: 1) Using Linux kernel 2.6.27-omap1, with an ALSA sound driver ported from a Wolfson supplied source tree labeled 2.6.29 (“dev” branch) 2) Using the TI OMAP3530 SOC married to a Wolfson WM8978 codec via McBSP1. I2C control, I2S pcm data. 3) We are running the codec digital block at 1.8V and the analog block at 3.3V 4) The WM8978 codec is synthesizing FCLK and BCLK, codec is the master. McBsp is the slave. 5) FCLK=44.1KHz, BCLK= 32 * FCLK, MCLK = 13Mhz 6) Framing is I2S stereo, 16 bit word I'm seeing two main problems: Problem 1: The WM8978 sample rate PLL does not seem to be stable while DCVDD = DBVDD = 1.8V. FCLK mean = 44.5KHz and jittering. Increasing DCVDD and DBVDD voltage above 2V increases PLL stability. We have a workaround for this for now. Problem 2: Test tone is being presented by the user application, providing a 1Khz tone sampled at 44.1Khz. The data are S16_LE, right channel only. Left channel is quiet. The data seems to slip back and forth from left to right channel. This is reproducable and verified with a scope trace. Anybody have any ideas what might be going wrong here? Traces for codec reg dump and mcbsp are attached. Thanks, twebb

9 11

[alsa-devel] [PATCH 0/3] ASoC: 4 channel support for twl4030 and omap-mcbsp - Try2
by Peter Ujfalusi 23 Apr '09

23 Apr '09

Hello, This series adds support for 4 channel DSP mode (A or B) to OMAP McBSP and also to the twl4030 codec driver. As an example the Beagle board file is modified to be able to use 4 channel mode. The change in twl4030 is made in a way, that it will not enable the 4 channel mode when the codec is in OPTION2 mode. Since some of the bits in the OPTION register are shared and have different effect in OPTION1 and OPTION2 modes, an extra care is taken to prevent unvanted modification to the register. Note: The series is on top of Mark's tree in regard of the twl4030 codec, so it is on top of the 'ASoC: TWL4030: Add VDL path support' from Joonyoung Shim. --- Peter Ujfalusi (2): ASoC: OMAP: Add 4 channel support to mcbsp ASoC: TWL4030: Add 4 channel TDM support Ujfalusi Peter (Nokia-D/Tampere) (1): ASoC: Beagle: Add support for 4 channel mode sound/soc/codecs/twl4030.c | 52 ++++++++++++++++++++++++++++++++++++++++- sound/soc/codecs/twl4030.h | 11 +++++++++ sound/soc/omap/omap-mcbsp.c | 5 ++- sound/soc/omap/omap3beagle.c | 26 ++++++++++++++------ 4 files changed, 82 insertions(+), 12 deletions(-)

2 5

[alsa-devel] [PATCH] alsa-info.sh: add command-line flag to print alsa info to stdout
by Luke Yelavich 23 Apr '09

23 Apr '09

Add the --stdout command-line flag to allow displaying the collected alsa information directly to standard output. This is useful for bug information collecting systems, such as Ubuntu's apport. Signed-off-by: Luke Yelavich <themuso(a)ubuntu.com> --- utils/alsa-info.sh | 34 +++++++++++++++++++++++++++++----- 1 files changed, 29 insertions(+), 5 deletions(-) diff --git a/utils/alsa-info.sh b/utils/alsa-info.sh index 0fff671..ee0de16 100755 --- a/utils/alsa-info.sh +++ b/utils/alsa-info.sh @@ -277,6 +277,12 @@ case "$1" in REPEAT="" shift ;; + --stdout) + DIALOG="" + NOUPLOAD="yes" + QUESTION="no" + TOSTDOUT="yes" + ;; esac done @@ -627,6 +633,17 @@ then fi fi ;; + --stdout) + NOUPLOAD="yes" + withdevices + withconfigs + withaplay + withamixer + withalsactl + withlsmod + cat $FILE + rm $FILE + ;; --about) echo "Written/Tested by the following users of #alsa on irc.freenode.net:" echo "" @@ -635,6 +652,7 @@ then echo " gnubien - Various script ideas / Testing" echo " GrueMaster - HDA Intel specific items / Testing" echo " olegfink - Script update function" + echo " TheMuso - display to stdout functionality" exit 0 ;; *) @@ -652,6 +670,8 @@ then echo " --no-upload (do not upload contents to remote server)" echo " --pastebin (use http://pastebin.ca) as remote server" echo " instead www.alsa-project.org" + echo " --stdout (print alsa information to standard output" + echo " instead of a file)" echo " --about (show some information about the script)" echo " --debug (will run the script as normal, but will not" echo " delete $FILE)" @@ -668,7 +688,9 @@ fi if [ -n "$NOUPLOAD" ]; then - mv $FILE $NFILE || exit 1 + if [ -z "$TOSTDOUT" ]; then + mv $FILE $NFILE || exit 1 + fi if [[ -n $DIALOG ]] then @@ -686,10 +708,12 @@ if [ -n "$NOUPLOAD" ]; then echo "Your ALSA information can be seen by looking in $NFILE" echo "" else - echo "You requested that your information was NOT automatically uploaded to the $WWWSERVICE" - echo "" - echo "Your ALSA information can be seen by looking in $NFILE" - echo "" + if [ -z "$TOSTDOUT" ]; then + echo "You requested that your information was NOT automatically uploaded to the $WWWSERVICE" + echo "" + echo "Your ALSA information can be seen by looking in $NFILE" + echo "" + fi fi fi -- 1.6.0.4

2 2

[alsa-devel] [RFC PATCH 5/5] ASoC: simplify the SSP DMA parameters settings by run-time generation
by Eric Miao 23 Apr '09

23 Apr '09

The SSP DMA parameters can actually be easily generated at run-time since they are almost similar except for the FIFO width and direction. Another benefit is the re-use of information from 'struct ssp_device', like SSDR physical FIFO address and DRCMR register index for both directions. Signed-off-by: Eric Miao <eric.miao(a)marvell.com> --- sound/soc/pxa/pxa-ssp.c | 206 ++++++++++------------------------------------- 1 files changed, 43 insertions(+), 163 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index 2ce4fb6..fb7235b 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -50,139 +50,6 @@ struct ssp_priv { #endif }; -#define PXA2xx_SSP1_BASE 0x41000000 -#define PXA27x_SSP2_BASE 0x41700000 -#define PXA27x_SSP3_BASE 0x41900000 -#define PXA3xx_SSP4_BASE 0x41a00000 - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = { - .name = "SSP1 PCM Mono out", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(14), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = { - .name = "SSP1 PCM Mono in", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(13), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = { - .name = "SSP1 PCM Stereo out", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(14), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = { - .name = "SSP1 PCM Stereo in", - .dev_addr = PXA2xx_SSP1_BASE + SSDR, - .drcmr = &DRCMR(13), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = { - .name = "SSP2 PCM Mono out", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(16), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = { - .name = "SSP2 PCM Mono in", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(15), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = { - .name = "SSP2 PCM Stereo out", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(16), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = { - .name = "SSP2 PCM Stereo in", - .dev_addr = PXA27x_SSP2_BASE + SSDR, - .drcmr = &DRCMR(15), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = { - .name = "SSP3 PCM Mono out", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = { - .name = "SSP3 PCM Mono in", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = { - .name = "SSP3 PCM Stereo out", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = { - .name = "SSP3 PCM Stereo in", - .dev_addr = PXA27x_SSP3_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = { - .name = "SSP4 PCM Mono out", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = { - .name = "SSP4 PCM Mono in", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH2, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = { - .name = "SSP4 PCM Stereo out", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(67), - .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | - DCMD_BURST16 | DCMD_WIDTH4, -}; - -static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = { - .name = "SSP4 PCM Stereo in", - .dev_addr = PXA3xx_SSP4_BASE + SSDR, - .drcmr = &DRCMR(66), - .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | - DCMD_BURST16 | DCMD_WIDTH4, -}; - static void dump_registers(struct ssp_device *ssp) { dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", @@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp) ssp_read_reg(ssp, SSACD)); } -static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = { - { - &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in, - &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in, - }, - { - &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in, - &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in, - }, - { - &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in, - &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in, - }, - { - &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in, - &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in, - }, +struct pxa2xx_pcm_dma_data { + struct pxa2xx_pcm_dma_params params; + char name[20]; }; +static struct pxa2xx_pcm_dma_params * +ssp_get_dma_params(struct ssp_device *ssp, int stereo, int out) +{ + struct pxa2xx_pcm_dma_data *dma; + + dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL); + if (dma == NULL) + return NULL; + + snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id, + stereo ? "Stereo" : "Mono", out ? "out" : "in"); + + dma->params.name = dma->name; + dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx); + dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) : + (DCMD_INCTRGADDR | DCMD_FLOWSRC)) | + (stereo ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16; + dma->params.dev_addr = ssp->phys_base + SSDR; + + return &dma->params; +} + static int pxa_ssp_startup(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { @@ -225,6 +100,11 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream, clk_enable(priv->ssp->clk); ssp_disable(priv->ssp); } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } return ret; } @@ -239,6 +119,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream, ssp_disable(priv->ssp); clk_disable(priv->ssp->clk); } + + if (cpu_dai->dma_data) { + kfree(cpu_dai->dma_data); + cpu_dai->dma_data = NULL; + } } #ifdef CONFIG_PM @@ -611,25 +496,20 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; struct ssp_priv *priv = cpu_dai->private_data; struct ssp_device *ssp = priv->ssp; - int dma = 0, chn = params_channels(params); + int chn = params_channels(params); u32 sscr0; u32 sspsp; int width = snd_pcm_format_physical_width(params_format(params)); int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf; - /* select correct DMA params */ - if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) - dma = 1; /* capture DMA offset is 1,3 */ - /* Network mode with one active slot (ttsa == 1) can be used - * to force 16-bit frame width on the wire (for S16_LE), even - * with two channels. Use 16-bit DMA transfers for this case. - */ - if (((chn == 2) && (ttsa != 1)) || (width == 32)) - dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */ - - cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma]; + printk("%s\n", __func__); + /* generate correct DMA params */ + if (cpu_dai->dma_data) + kfree(cpu_dai->dma_data); - dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma); + cpu_dai->dma_data = ssp_get_dma_params(ssp, + ((chn == 2) && (ttsa != 1)) || (width == 32), + substream->stream == SNDRV_PCM_STREAM_PLAYBACK); /* we can only change the settings if the port is not in use */ if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) -- 1.6.0.4

3 12

[alsa-devel] [PATCH] keywest: Convert to new-style i2c driver
by Jean Delvare 23 Apr '09

23 Apr '09

The legacy i2c binding model is going away soon, so convert the ppc keywest sound driver to the new model or it will break. Signed-off-by: Jean Delvare <khali(a)linux-fr.org> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Takashi Iwai <tiwai(a)suse.de> --- Takashi, please push this patch to Linus quickly, as this is blocking the removal of the legacy i2c binding model, which is scheduled for 2.6.30. I did not get any test report for this one, but it's relatively simple so I am confident I got it right. sound/ppc/keywest.c | 82 +++++++++++++++++++++++++-------------------------- 1 file changed, 41 insertions(+), 41 deletions(-) --- linux-2.6.30-rc2.orig/sound/ppc/keywest.c 2009-04-20 22:40:27.000000000 +0200 +++ linux-2.6.30-rc2/sound/ppc/keywest.c 2009-04-20 22:47:34.000000000 +0200 @@ -33,26 +33,25 @@ static struct pmac_keywest *keywest_ctx; -static int keywest_attach_adapter(struct i2c_adapter *adapter); -static int keywest_detach_client(struct i2c_client *client); - -struct i2c_driver keywest_driver = { - .driver = { - .name = "PMac Keywest Audio", - }, - .attach_adapter = &keywest_attach_adapter, - .detach_client = &keywest_detach_client, -}; - - #ifndef i2c_device_name #define i2c_device_name(x) ((x)->name) #endif +static int keywest_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + i2c_set_clientdata(client, keywest_ctx); + return 0; +} + +/* + * This is kind of a hack, best would be to turn powermac to fixed i2c + * bus numbers and declare the sound device as part of platform + * initialization + */ static int keywest_attach_adapter(struct i2c_adapter *adapter) { - int err; - struct i2c_client *new_client; + struct i2c_board_info info; if (! keywest_ctx) return -EINVAL; @@ -60,46 +59,47 @@ static int keywest_attach_adapter(struct if (strncmp(i2c_device_name(adapter), "mac-io", 6)) return 0; /* ignored */ - new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL); - if (! new_client) - return -ENOMEM; - - new_client->addr = keywest_ctx->addr; - i2c_set_clientdata(new_client, keywest_ctx); - new_client->adapter = adapter; - new_client->driver = &keywest_driver; - new_client->flags = 0; - - strcpy(i2c_device_name(new_client), keywest_ctx->name); - keywest_ctx->client = new_client; + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "keywest", I2C_NAME_SIZE); + info.addr = keywest_ctx->addr; + keywest_ctx->client = i2c_new_device(adapter, &info); - /* Tell the i2c layer a new client has arrived */ - if (i2c_attach_client(new_client)) { - snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n"); - err = -ENODEV; - goto __err; - } - + /* + * Let i2c-core delete that device on driver removal. + * This is safe because i2c-core holds the core_lock mutex for us. + */ + list_add_tail(&keywest_ctx->client->detected, + &keywest_ctx->client->driver->clients); return 0; - - __err: - kfree(new_client); - keywest_ctx->client = NULL; - return err; } -static int keywest_detach_client(struct i2c_client *client) +static int keywest_remove(struct i2c_client *client) { + i2c_set_clientdata(client, NULL); if (! keywest_ctx) return 0; if (client == keywest_ctx->client) keywest_ctx->client = NULL; - i2c_detach_client(client); - kfree(client); return 0; } + +static const struct i2c_device_id keywest_i2c_id[] = { + { "keywest", 0 }, + { } +}; + +struct i2c_driver keywest_driver = { + .driver = { + .name = "PMac Keywest Audio", + }, + .attach_adapter = keywest_attach_adapter, + .probe = keywest_probe, + .remove = keywest_remove, + .id_table = keywest_i2c_id, +}; + /* exported */ void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c) { -- Jean Delvare

3 12

[alsa-devel] [RFC PATCH 4/5] ASoC: remove those unnecessary #ifdef CONFIG_PXA3xx .. #endif
by Eric Miao 23 Apr '09

23 Apr '09

These are unnecessary since the compiler is smart enough to optimize the code away if CONFIG_PXA3xx is not defined, when cpu_is_pxa3xx() will just be expanded to constant 0. Signed-off-by: Eric Miao <eric.miao(a)marvell.com> --- sound/soc/pxa/pxa-ssp.c | 15 --------------- 1 files changed, 0 insertions(+), 15 deletions(-) diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c index a65993c..2ce4fb6 100644 --- a/sound/soc/pxa/pxa-ssp.c +++ b/sound/soc/pxa/pxa-ssp.c @@ -360,24 +360,20 @@ static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, case PXA_SSP_AUDIO_DIV_SCDB: val = ssp_read_reg(ssp, SSACD); val &= ~SSACD_SCDB; -#if defined(CONFIG_PXA3xx) if (cpu_is_pxa3xx()) val &= ~SSACD_SCDX8; -#endif switch (div) { case PXA_SSP_CLK_SCDB_1: val |= SSACD_SCDB; break; case PXA_SSP_CLK_SCDB_4: break; -#if defined(CONFIG_PXA3xx) case PXA_SSP_CLK_SCDB_8: if (cpu_is_pxa3xx()) val |= SSACD_SCDX8; else return -EINVAL; break; -#endif default: return -EINVAL; } @@ -403,10 +399,8 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, struct ssp_device *ssp = priv->ssp; u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70; -#if defined(CONFIG_PXA3xx) if (cpu_is_pxa3xx()) ssp_write_reg(ssp, SSACDD, 0); -#endif switch (freq_out) { case 5622000: @@ -431,7 +425,6 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, break; default: -#ifdef CONFIG_PXA3xx /* PXA3xx has a clock ditherer which can be used to generate * a wider range of frequencies - calculate a value for it. */ @@ -452,8 +445,6 @@ static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, val, freq_out); break; } -#endif - return -EINVAL; } @@ -652,10 +643,8 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sscr0 = ssp_read_reg(ssp, SSCR0); switch (params_format(params)) { case SNDRV_PCM_FORMAT_S16_LE: -#ifdef CONFIG_PXA3xx if (cpu_is_pxa3xx()) sscr0 |= SSCR0_FPCKE; -#endif sscr0 |= SSCR0_DataSize(16); break; case SNDRV_PCM_FORMAT_S24_LE: @@ -682,7 +671,6 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, * needed for that mode are only available on PXA3xx. */ -#ifdef CONFIG_PXA3xx if (!cpu_is_pxa3xx()) return -EINVAL; @@ -691,9 +679,6 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, sspsp |= SSPSP_EDMYSTOP(3); sspsp |= SSPSP_DMYSTOP(3); sspsp |= SSPSP_DMYSTRT(1); -#else - return -EINVAL; -#endif } else { /* The frame width is the width the LRCLK is * asserted for; the delay is expressed in -- 1.6.0.4

3 5

[alsa-devel] AD1981B SoundMax
by Daniel Vogel 23 Apr '09

23 Apr '09

Hello Developers, sorry if this question is off topic on this list, but I don't know where else to send the question to. I'm currently developing an audio-application on an ARM board that is equipped with an AD1981B SoundMax chip. Everything works well except the build-in equalizer. Since it is impossible to get usable technical information from Analog-Device my last hope is to find someone on this list who has some experience with the chip in question. My problem started with the datasheet not telling the format of the fixed point numbers for biquad coefficients. It only states that they are 16 bit numbers with 16 bit resolution... Then, when I use an estimated value for a0 that is unequal from zero and all other coefficients are zero, in theory I should hear some sound when I play a PCM file (44.1kHz / 16Bit) . But there is only silence on the output when the equalizer is not muted. Is there something else I have to set up to make the equalizer output pass through? Looking forward for answers. ;-) Thanks in advance! Daniel GO Engineering GmbH - Stolzenbergstr. 13/IV - 76532 Baden-Baden Geschäftsführer: Helmut Gerstner, Dipl.-Ing. (FH) Ralf Wörner, Dipl.-Ing. (FH) Registergericht: Mannheim HRB 201811

1 0

[alsa-devel] [PATCH v2 1/1] ASoC: TWL4030: Add VDL path support
by Joonyoung Shim 23 Apr '09

23 Apr '09

Add DAPMs for VDL(Voice Down Link) path. To support VDL path, we have to change DAPMs of outputs(Earpiece, PreDrive Left/Right, Headset Left/Right, Carkit Left/Right) from mux to mixer. Signed-off-by: Joonyoung Shim <jy0922.shim(a)samsung.com> --- sound/soc/codecs/twl4030.c | 256 ++++++++++++++++++++++---------------------- 1 files changed, 126 insertions(+), 130 deletions(-) diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index cc2968c..fdf88df 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -321,104 +321,60 @@ static void twl4030_power_down(struct snd_soc_codec *codec) } /* Earpiece */ -static const char *twl4030_earpiece_texts[] = - {"Off", "DACL1", "DACL2", "DACR1"}; - -static const unsigned int twl4030_earpiece_values[] = - {0x0, 0x1, 0x2, 0x4}; - -static const struct soc_enum twl4030_earpiece_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7, - ARRAY_SIZE(twl4030_earpiece_texts), - twl4030_earpiece_texts, - twl4030_earpiece_values); - -static const struct snd_kcontrol_new twl4030_dapm_earpiece_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_earpiece_enum); +static const struct snd_kcontrol_new twl4030_dapm_earpiece_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_EAR_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_EAR_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_EAR_CTL, 2, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_EAR_CTL, 3, 1, 0), +}; /* PreDrive Left */ -static const char *twl4030_predrivel_texts[] = - {"Off", "DACL1", "DACL2", "DACR2"}; - -static const unsigned int twl4030_predrivel_values[] = - {0x0, 0x1, 0x2, 0x4}; - -static const struct soc_enum twl4030_predrivel_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7, - ARRAY_SIZE(twl4030_predrivel_texts), - twl4030_predrivel_texts, - twl4030_predrivel_values); - -static const struct snd_kcontrol_new twl4030_dapm_predrivel_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_predrivel_enum); +static const struct snd_kcontrol_new twl4030_dapm_predrivel_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDL_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PREDL_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDL_CTL, 2, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDL_CTL, 3, 1, 0), +}; /* PreDrive Right */ -static const char *twl4030_predriver_texts[] = - {"Off", "DACR1", "DACR2", "DACL2"}; - -static const unsigned int twl4030_predriver_values[] = - {0x0, 0x1, 0x2, 0x4}; - -static const struct soc_enum twl4030_predriver_enum = - SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7, - ARRAY_SIZE(twl4030_predriver_texts), - twl4030_predriver_texts, - twl4030_predriver_values); - -static const struct snd_kcontrol_new twl4030_dapm_predriver_control = -SOC_DAPM_VALUE_ENUM("Route", twl4030_predriver_enum); +static const struct snd_kcontrol_new twl4030_dapm_predriver_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PREDR_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PREDR_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PREDR_CTL, 2, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PREDR_CTL, 3, 1, 0), +}; /* Headset Left */ -static const char *twl4030_hsol_texts[] = - {"Off", "DACL1", "DACL2"}; - -static const struct soc_enum twl4030_hsol_enum = - SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1, - ARRAY_SIZE(twl4030_hsol_texts), - twl4030_hsol_texts); - -static const struct snd_kcontrol_new twl4030_dapm_hsol_control = -SOC_DAPM_ENUM("Route", twl4030_hsol_enum); +static const struct snd_kcontrol_new twl4030_dapm_hsol_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_HS_SEL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_HS_SEL, 2, 1, 0), +}; /* Headset Right */ -static const char *twl4030_hsor_texts[] = - {"Off", "DACR1", "DACR2"}; - -static const struct soc_enum twl4030_hsor_enum = - SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4, - ARRAY_SIZE(twl4030_hsor_texts), - twl4030_hsor_texts); - -static const struct snd_kcontrol_new twl4030_dapm_hsor_control = -SOC_DAPM_ENUM("Route", twl4030_hsor_enum); +static const struct snd_kcontrol_new twl4030_dapm_hsor_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_HS_SEL, 3, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_HS_SEL, 4, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_HS_SEL, 5, 1, 0), +}; /* Carkit Left */ -static const char *twl4030_carkitl_texts[] = - {"Off", "DACL1", "DACL2"}; - -static const struct soc_enum twl4030_carkitl_enum = - SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1, - ARRAY_SIZE(twl4030_carkitl_texts), - twl4030_carkitl_texts); - -static const struct snd_kcontrol_new twl4030_dapm_carkitl_control = -SOC_DAPM_ENUM("Route", twl4030_carkitl_enum); +static const struct snd_kcontrol_new twl4030_dapm_carkitl_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKL_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioL1", TWL4030_REG_PRECKL_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioL2", TWL4030_REG_PRECKL_CTL, 2, 1, 0), +}; /* Carkit Right */ -static const char *twl4030_carkitr_texts[] = - {"Off", "DACR1", "DACR2"}; - -static const struct soc_enum twl4030_carkitr_enum = - SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1, - ARRAY_SIZE(twl4030_carkitr_texts), - twl4030_carkitr_texts); - -static const struct snd_kcontrol_new twl4030_dapm_carkitr_control = -SOC_DAPM_ENUM("Route", twl4030_carkitr_enum); +static const struct snd_kcontrol_new twl4030_dapm_carkitr_controls[] = { + SOC_DAPM_SINGLE("Voice", TWL4030_REG_PRECKR_CTL, 0, 1, 0), + SOC_DAPM_SINGLE("AudioR1", TWL4030_REG_PRECKR_CTL, 1, 1, 0), + SOC_DAPM_SINGLE("AudioR2", TWL4030_REG_PRECKR_CTL, 2, 1, 0), +}; /* Handsfree Left */ static const char *twl4030_handsfreel_texts[] = - {"Voice", "DACL1", "DACL2", "DACR2"}; + {"Voice", "AudioL1", "AudioL2", "AudioR2"}; static const struct soc_enum twl4030_handsfreel_enum = SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0, @@ -430,7 +386,7 @@ SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum); /* Handsfree Right */ static const char *twl4030_handsfreer_texts[] = - {"Voice", "DACR1", "DACR2", "DACL2"}; + {"Voice", "AudioR1", "AudioR2", "AudioL2"}; static const struct soc_enum twl4030_handsfreer_enum = SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0, @@ -829,6 +785,12 @@ static DECLARE_TLV_DB_SCALE(digital_fine_tlv, -6300, 100, 1); static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0); /* + * Voice Downlink GAIN volume control: + * from -37 to 12 dB in 1 dB steps (mute instead of -37 dB) + */ +static DECLARE_TLV_DB_SCALE(digital_voice_downlink_tlv, -3700, 100, 1); + +/* * Analog playback gain * -24 dB to 12 dB in 2 dB steps */ @@ -892,6 +854,16 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL, 1, 1, 0), + /* Common voice downlink gain controls */ + SOC_SINGLE_TLV("DAC Voice Digital Downlink Volume", + TWL4030_REG_VRXPGA, 0, 0x31, 0, digital_voice_downlink_tlv), + + SOC_SINGLE_TLV("DAC Voice Analog Downlink Volume", + TWL4030_REG_VDL_APGA_CTL, 3, 0x12, 1, analog_tlv), + + SOC_SINGLE("DAC Voice Analog Downlink Switch", + TWL4030_REG_VDL_APGA_CTL, 1, 1, 0), + /* Separate output gain controls */ SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume", TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL, @@ -956,6 +928,8 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_NOPM, 0, 0), SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("DAC Voice", "Voice Playback", + TWL4030_REG_AVDAC_CTL, 4, 0), /* Analog PGAs */ SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL, @@ -966,6 +940,8 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { 0, 0, NULL, 0), SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL, 0, 0, NULL, 0), + SND_SOC_DAPM_PGA("VDL_APGA", TWL4030_REG_VDL_APGA_CTL, + 0, 0, NULL, 0), /* Analog bypasses */ SND_SOC_DAPM_SWITCH_E("Right1 Analog Loopback", SND_SOC_NOPM, 0, 0, @@ -998,26 +974,35 @@ static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { SND_SOC_DAPM_MIXER("Analog L2 Playback Mixer", TWL4030_REG_AVDAC_CTL, 3, 0, NULL, 0), - /* Output MUX controls */ + /* Output MIXER controls */ /* Earpiece */ - SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_earpiece_control), + SND_SOC_DAPM_MIXER("Earpiece Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_earpiece_controls[0], + ARRAY_SIZE(twl4030_dapm_earpiece_controls)), /* PreDrivL/R */ - SND_SOC_DAPM_VALUE_MUX("PredriveL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_predrivel_control), - SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_predriver_control), + SND_SOC_DAPM_MIXER("PredriveL Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_predrivel_controls[0], + ARRAY_SIZE(twl4030_dapm_predrivel_controls)), + SND_SOC_DAPM_MIXER("PredriveR Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_predriver_controls[0], + ARRAY_SIZE(twl4030_dapm_predriver_controls)), /* HeadsetL/R */ - SND_SOC_DAPM_MUX_E("HeadsetL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_hsol_control, headsetl_event, - SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), - SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_hsor_control), + SND_SOC_DAPM_MIXER_E("HeadsetL Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_hsol_controls[0], + ARRAY_SIZE(twl4030_dapm_hsol_controls), headsetl_event, + SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_MIXER("HeadsetR Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_hsor_controls[0], + ARRAY_SIZE(twl4030_dapm_hsor_controls)), /* CarkitL/R */ - SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_carkitl_control), - SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0, - &twl4030_dapm_carkitr_control), + SND_SOC_DAPM_MIXER("CarkitL Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_carkitl_controls[0], + ARRAY_SIZE(twl4030_dapm_carkitl_controls)), + SND_SOC_DAPM_MIXER("CarkitR Mixer", SND_SOC_NOPM, 0, 0, + &twl4030_dapm_carkitr_controls[0], + ARRAY_SIZE(twl4030_dapm_carkitr_controls)), + + /* Output MUX controls */ /* HandsfreeL/R */ SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0, &twl4030_dapm_handsfreel_control, handsfree_event, @@ -1082,50 +1067,61 @@ static const struct snd_soc_dapm_route intercon[] = { {"ARXL2_APGA", NULL, "Analog L2 Playback Mixer"}, {"ARXR2_APGA", NULL, "Analog R2 Playback Mixer"}, + {"VDL_APGA", NULL, "DAC Voice"}, + /* Internal playback routings */ /* Earpiece */ - {"Earpiece Mux", "DACL1", "ARXL1_APGA"}, - {"Earpiece Mux", "DACL2", "ARXL2_APGA"}, - {"Earpiece Mux", "DACR1", "ARXR1_APGA"}, + {"Earpiece Mixer", "Voice", "VDL_APGA"}, + {"Earpiece Mixer", "AudioL1", "ARXL1_APGA"}, + {"Earpiece Mixer", "AudioL2", "ARXL2_APGA"}, + {"Earpiece Mixer", "AudioR1", "ARXR1_APGA"}, /* PreDrivL */ - {"PredriveL Mux", "DACL1", "ARXL1_APGA"}, - {"PredriveL Mux", "DACL2", "ARXL2_APGA"}, - {"PredriveL Mux", "DACR2", "ARXR2_APGA"}, + {"PredriveL Mixer", "Voice", "VDL_APGA"}, + {"PredriveL Mixer", "AudioL1", "ARXL1_APGA"}, + {"PredriveL Mixer", "AudioL2", "ARXL2_APGA"}, + {"PredriveL Mixer", "AudioR2", "ARXR2_APGA"}, /* PreDrivR */ - {"PredriveR Mux", "DACR1", "ARXR1_APGA"}, - {"PredriveR Mux", "DACR2", "ARXR2_APGA"}, - {"PredriveR Mux", "DACL2", "ARXL2_APGA"}, + {"PredriveR Mixer", "Voice", "VDL_APGA"}, + {"PredriveR Mixer", "AudioR1", "ARXR1_APGA"}, + {"PredriveR Mixer", "AudioR2", "ARXR2_APGA"}, + {"PredriveR Mixer", "AudioL2", "ARXL2_APGA"}, /* HeadsetL */ - {"HeadsetL Mux", "DACL1", "ARXL1_APGA"}, - {"HeadsetL Mux", "DACL2", "ARXL2_APGA"}, + {"HeadsetL Mixer", "Voice", "VDL_APGA"}, + {"HeadsetL Mixer", "AudioL1", "ARXL1_APGA"}, + {"HeadsetL Mixer", "AudioL2", "ARXL2_APGA"}, /* HeadsetR */ - {"HeadsetR Mux", "DACR1", "ARXR1_APGA"}, - {"HeadsetR Mux", "DACR2", "ARXR2_APGA"}, + {"HeadsetR Mixer", "Voice", "VDL_APGA"}, + {"HeadsetR Mixer", "AudioR1", "ARXR1_APGA"}, + {"HeadsetR Mixer", "AudioR2", "ARXR2_APGA"}, /* CarkitL */ - {"CarkitL Mux", "DACL1", "ARXL1_APGA"}, - {"CarkitL Mux", "DACL2", "ARXL2_APGA"}, + {"CarkitL Mixer", "Voice", "VDL_APGA"}, + {"CarkitL Mixer", "AudioL1", "ARXL1_APGA"}, + {"CarkitL Mixer", "AudioL2", "ARXL2_APGA"}, /* CarkitR */ - {"CarkitR Mux", "DACR1", "ARXR1_APGA"}, - {"CarkitR Mux", "DACR2", "ARXR2_APGA"}, + {"CarkitR Mixer", "Voice", "VDL_APGA"}, + {"CarkitR Mixer", "AudioR1", "ARXR1_APGA"}, + {"CarkitR Mixer", "AudioR2", "ARXR2_APGA"}, /* HandsfreeL */ - {"HandsfreeL Mux", "DACL1", "ARXL1_APGA"}, - {"HandsfreeL Mux", "DACL2", "ARXL2_APGA"}, - {"HandsfreeL Mux", "DACR2", "ARXR2_APGA"}, + {"HandsfreeL Mux", "Voice", "VDL_APGA"}, + {"HandsfreeL Mux", "AudioL1", "ARXL1_APGA"}, + {"HandsfreeL Mux", "AudioL2", "ARXL2_APGA"}, + {"HandsfreeL Mux", "AudioR2", "ARXR2_APGA"}, /* HandsfreeR */ - {"HandsfreeR Mux", "DACR1", "ARXR1_APGA"}, - {"HandsfreeR Mux", "DACR2", "ARXR2_APGA"}, - {"HandsfreeR Mux", "DACL2", "ARXL2_APGA"}, + {"HandsfreeR Mux", "Voice", "VDL_APGA"}, + {"HandsfreeR Mux", "AudioR1", "ARXR1_APGA"}, + {"HandsfreeR Mux", "AudioR2", "ARXR2_APGA"}, + {"HandsfreeR Mux", "AudioL2", "ARXL2_APGA"}, /* outputs */ {"OUTL", NULL, "ARXL2_APGA"}, {"OUTR", NULL, "ARXR2_APGA"}, - {"EARPIECE", NULL, "Earpiece Mux"}, - {"PREDRIVEL", NULL, "PredriveL Mux"}, - {"PREDRIVER", NULL, "PredriveR Mux"}, - {"HSOL", NULL, "HeadsetL Mux"}, - {"HSOR", NULL, "HeadsetR Mux"}, - {"CARKITL", NULL, "CarkitL Mux"}, - {"CARKITR", NULL, "CarkitR Mux"}, + {"EARPIECE", NULL, "Earpiece Mixer"}, + {"PREDRIVEL", NULL, "PredriveL Mixer"}, + {"PREDRIVER", NULL, "PredriveR Mixer"}, + {"HSOL", NULL, "HeadsetL Mixer"}, + {"HSOR", NULL, "HeadsetR Mixer"}, + {"CARKITL", NULL, "CarkitL Mixer"}, + {"CARKITR", NULL, "CarkitR Mixer"}, {"HFL", NULL, "HandsfreeL Mux"}, {"HFR", NULL, "HandsfreeR Mux"}, -- 1.5.6.3

3 2

[alsa-devel] [RFC PATCH 2/5] pxa: remove deprecated corgi_{ssp, lcd}.c
by Eric Miao 23 Apr '09

23 Apr '09

Signed-off-by: Eric Miao <eric.miao(a)marvell.com> --- arch/arm/mach-pxa/Kconfig | 8 - arch/arm/mach-pxa/Makefile | 1 - arch/arm/mach-pxa/corgi_lcd.c | 288 ---------------------------------------- arch/arm/mach-pxa/corgi_ssp.c | 275 -------------------------------------- arch/arm/mach-pxa/sharpsl_pm.c | 9 +- 5 files changed, 2 insertions(+), 579 deletions(-) delete mode 100644 arch/arm/mach-pxa/corgi_lcd.c delete mode 100644 arch/arm/mach-pxa/corgi_ssp.c diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a225658..d52d8a3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -88,14 +88,6 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. -config CORGI_SSP_DEPRECATED - bool - select PXA_SSP - help - This option will include corgi_ssp.c and corgi_lcd.c - that corgi_ts.c and other legacy drivers (corgi_bl.c - and sharpsl_pm.c) may depend on. - config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 4bcebf7..eb89363 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -41,7 +41,6 @@ obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o obj-$(CONFIG_MACH_H5000) += h5000.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o -obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c deleted file mode 100644 index d9b9631..0000000 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ /dev/null @@ -1,288 +0,0 @@ -/* - * linux/arch/arm/mach-pxa/corgi_lcd.c - * - * Corgi/Spitz LCD Specific Code - * - * Copyright (C) 2005 Richard Purdie - * - * Connectivity: - * Corgi - LCD to ATI Imageon w100 (Wallaby) - * Spitz - LCD to PXA Framebuffer - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/module.h> -#include <linux/string.h> -#include <mach/corgi.h> -#include <mach/hardware.h> -#include <mach/sharpsl.h> -#include <mach/spitz.h> -#include <asm/hardware/scoop.h> -#include <asm/mach/sharpsl_param.h> -#include "generic.h" - -/* Register Addresses */ -#define RESCTL_ADRS 0x00 -#define PHACTRL_ADRS 0x01 -#define DUTYCTRL_ADRS 0x02 -#define POWERREG0_ADRS 0x03 -#define POWERREG1_ADRS 0x04 -#define GPOR3_ADRS 0x05 -#define PICTRL_ADRS 0x06 -#define POLCTRL_ADRS 0x07 - -/* Register Bit Definitions */ -#define RESCTL_QVGA 0x01 -#define RESCTL_VGA 0x00 - -#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ -#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ -#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ - -#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ -#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ -#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ - -#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ -#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ -#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ -#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ -#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ - -#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ -#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ -#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ - -#define PICTRL_INIT_STATE 0x01 -#define PICTRL_INIOFF 0x02 -#define PICTRL_POWER_DOWN 0x04 -#define PICTRL_COM_SIGNAL_OFF 0x08 -#define PICTRL_DAC_SIGNAL_OFF 0x10 - -#define POLCTRL_SYNC_POL_FALL 0x01 -#define POLCTRL_EN_POL_FALL 0x02 -#define POLCTRL_DATA_POL_FALL 0x04 -#define POLCTRL_SYNC_ACT_H 0x08 -#define POLCTRL_EN_ACT_L 0x10 - -#define POLCTRL_SYNC_POL_RISE 0x00 -#define POLCTRL_EN_POL_RISE 0x00 -#define POLCTRL_DATA_POL_RISE 0x00 -#define POLCTRL_SYNC_ACT_L 0x00 -#define POLCTRL_EN_ACT_H 0x00 - -#define PHACTRL_PHASE_MANUAL 0x01 -#define DEFAULT_PHAD_QVGA (9) -#define DEFAULT_COMADJ (125) - -/* - * This is only a psuedo I2C interface. We can't use the standard kernel - * routines as the interface is write only. We just assume the data is acked... - */ -static void lcdtg_ssp_i2c_send(u8 data) -{ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); - udelay(10); -} - -static void lcdtg_i2c_send_bit(u8 data) -{ - lcdtg_ssp_i2c_send(data); - lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(data); -} - -static void lcdtg_i2c_send_start(u8 base) -{ - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base); -} - -static void lcdtg_i2c_send_stop(u8 base) -{ - lcdtg_ssp_i2c_send(base); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); - lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); -} - -static void lcdtg_i2c_send_byte(u8 base, u8 data) -{ - int i; - for (i = 0; i < 8; i++) { - if (data & 0x80) - lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); - else - lcdtg_i2c_send_bit(base); - data <<= 1; - } -} - -static void lcdtg_i2c_wait_ack(u8 base) -{ - lcdtg_i2c_send_bit(base); -} - -static void lcdtg_set_common_voltage(u8 base_data, u8 data) -{ - /* Set Common Voltage to M62332FP via I2C */ - lcdtg_i2c_send_start(base_data); - lcdtg_i2c_send_byte(base_data, 0x9c); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, 0x00); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_byte(base_data, data); - lcdtg_i2c_wait_ack(base_data); - lcdtg_i2c_send_stop(base_data); -} - -/* Set Phase Adjust */ -static void lcdtg_set_phadadj(int mode) -{ - int adj; - switch(mode) { - case 480: - case 640: - /* Setting for VGA */ - adj = sharpsl_param.phadadj; - if (adj < 0) { - adj = PHACTRL_PHASE_MANUAL; - } else { - adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; - } - break; - case 240: - case 320: - default: - /* Setting for QVGA */ - adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; - break; - } - - corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); -} - -static int lcd_inited; - -void corgi_lcdtg_hw_init(int mode) -{ - if (!lcd_inited) { - int comadj; - - /* Initialize Internal Logic & Port */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE - | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); - - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - /* VDD(+8V), SVSS(-4V) ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - mdelay(3); - - /* DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* INIB = H, INI = L */ - /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); - - /* Set Common Voltage */ - comadj = sharpsl_param.comadj; - if (comadj < 0) - comadj = DEFAULT_COMADJ; - lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); - - /* VCC5 ON, DAC ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | - POWER0_COM_OFF | POWER0_VCC5_ON); - - /* GVSS(-8V) ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - mdelay(2); - - /* COM SIGNAL ON (PICTL[3] = L) */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); - - /* COM ON, DAC ON, VCC5_ON */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON - | POWER0_COM_ON | POWER0_VCC5_ON); - - /* VW ON, GVSS ON, VDD ON */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* Signals output enable */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); - - /* Set Phase Adjust */ - lcdtg_set_phadadj(mode); - - /* Initialize for Input Signals from ATI */ - corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE - | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); - udelay(1000); - - lcd_inited=1; - } else { - lcdtg_set_phadadj(mode); - } - - switch(mode) { - case 480: - case 640: - /* Set Lcd Resolution (VGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); - break; - case 240: - case 320: - default: - /* Set Lcd Resolution (QVGA) */ - corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); - break; - } -} - -void corgi_lcdtg_suspend(void) -{ - /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ - mdelay(34); - - /* (1)VW OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); - - /* (2)COM OFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); - - /* (3)Set Common Voltage Bias 0V */ - lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); - - /* (4)GVSS OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); - - /* (5)VCC5 OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (6)Set PDWN, INIOFF, DACOFF */ - corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | - PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); - - /* (7)DAC OFF */ - corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); - - /* (8)VDD OFF */ - corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); - - lcd_inited = 0; -} - diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c deleted file mode 100644 index a5ee707..0000000 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ /dev/null @@ -1,275 +0,0 @@ -/* - * SSP control code for Sharp Corgi devices - * - * Copyright (c) 2004-2005 Richard Purdie - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <mach/hardware.h> -#include <asm/mach-types.h> - -#include <mach/ssp.h> -#include <mach/pxa2xx-gpio.h> -#include <mach/regs-ssp.h> -#include "sharpsl.h" - -static DEFINE_SPINLOCK(corgi_ssp_lock); -static struct ssp_dev corgi_ssp_dev; -static struct ssp_state corgi_ssp_state; -static struct corgissp_machinfo *ssp_machinfo; - -/* - * There are three devices connected to the SSP interface: - * 1. A touchscreen controller (TI ADS7846 compatible) - * 2. An LCD controller (with some Backlight functionality) - * 3. A battery monitoring IC (Maxim MAX1111) - * - * Each device uses a different speed/mode of communication. - * - * The touchscreen is very sensitive and the most frequently used - * so the port is left configured for this. - * - * Devices are selected using Chip Selects on GPIOs. - */ - -/* - * ADS7846 Routines - */ -unsigned long corgi_ssp_ads7846_putget(ulong data) -{ - unsigned long flag; - u32 ret = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, &ret); - - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return ret; -} - -/* - * NOTE: These functions should always be called in interrupt context - * and use the _lock and _unlock functions. They are very time sensitive. - */ -void corgi_ssp_ads7846_lock(void) -{ - spin_lock(&corgi_ssp_lock); - if (ssp_machinfo->cs_ads7846 >= 0) - GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); -} - -void corgi_ssp_ads7846_unlock(void) -{ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); - spin_unlock(&corgi_ssp_lock); -} - -void corgi_ssp_ads7846_put(ulong data) -{ - ssp_write_word(&corgi_ssp_dev,data); -} - -unsigned long corgi_ssp_ads7846_get(void) -{ - u32 ret = 0; - ssp_read_word(&corgi_ssp_dev, &ret); - return ret; -} - -EXPORT_SYMBOL(corgi_ssp_ads7846_putget); -EXPORT_SYMBOL(corgi_ssp_ads7846_lock); -EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); -EXPORT_SYMBOL(corgi_ssp_ads7846_put); -EXPORT_SYMBOL(corgi_ssp_ads7846_get); - - -/* - * LCD/Backlight Routines - */ -unsigned long corgi_ssp_dac_put(ulong data) -{ - unsigned long flag, sscr1 = SSCR1_SPH; - u32 tmp; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - - if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) - sscr1 = 0; - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); - ssp_enable(&corgi_ssp_dev); - - if (ssp_machinfo->cs_lcdcon >= 0) - GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - ssp_write_word(&corgi_ssp_dev,data); - /* Read null data back from device to prevent SSP overflow */ - ssp_read_word(&corgi_ssp_dev, &tmp); - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - return 0; -} - -void corgi_ssp_lcdtg_send(u8 adrs, u8 data) -{ - corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); -} - -void corgi_ssp_blduty_set(int duty) -{ - corgi_ssp_lcdtg_send(0x02,duty); -} - -EXPORT_SYMBOL(corgi_ssp_lcdtg_send); -EXPORT_SYMBOL(corgi_ssp_blduty_set); - -/* - * Max1111 Routines - */ -int corgi_ssp_max1111_get(ulong data) -{ - unsigned long flag; - long voltage = 0, voltage1 = 0, voltage2 = 0; - - spin_lock_irqsave(&corgi_ssp_lock, flag); - if (ssp_machinfo->cs_max1111 >= 0) - GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); - ssp_enable(&corgi_ssp_dev); - - udelay(1); - - /* TB1/RB1 */ - ssp_write_word(&corgi_ssp_dev,data); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ - - /* TB12/RB2 */ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); - - /* TB13/RB3*/ - ssp_write_word(&corgi_ssp_dev,0); - ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); - - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); - spin_unlock_irqrestore(&corgi_ssp_lock, flag); - - if (voltage1 & 0xc0 || voltage2 & 0x3f) - voltage = -1; - else - voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); - - return voltage; -} - -EXPORT_SYMBOL(corgi_ssp_max1111_get); - -/* - * Support Routines - */ - -void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) -{ - ssp_machinfo = machinfo; -} - -static int __init corgi_ssp_probe(struct platform_device *dev) -{ - int ret; - - /* Chip Select - Disable All */ - if (ssp_machinfo->cs_lcdcon >= 0) - pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_max1111 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); - if (ssp_machinfo->cs_ads7846 >= 0) - pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); - - ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); - - if (ret) - printk(KERN_ERR "Unable to register SSP handler!\n"); - else { - ssp_disable(&corgi_ssp_dev); - ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); - ssp_enable(&corgi_ssp_dev); - } - - return ret; -} - -static int corgi_ssp_remove(struct platform_device *dev) -{ - ssp_exit(&corgi_ssp_dev); - return 0; -} - -static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) -{ - ssp_flush(&corgi_ssp_dev); - ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); - - return 0; -} - -static int corgi_ssp_resume(struct platform_device *dev) -{ - if (ssp_machinfo->cs_lcdcon >= 0) - GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ - if (ssp_machinfo->cs_max1111 >= 0) - GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ - if (ssp_machinfo->cs_ads7846 >= 0) - GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ - ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); - ssp_enable(&corgi_ssp_dev); - - return 0; -} - -static struct platform_driver corgissp_driver = { - .probe = corgi_ssp_probe, - .remove = corgi_ssp_remove, - .suspend = corgi_ssp_suspend, - .resume = corgi_ssp_resume, - .driver = { - .name = "corgi-ssp", - }, -}; - -int __init corgi_ssp_init(void) -{ - return platform_driver_register(&corgissp_driver); -} - -arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 16b4ec6..007ff5e 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -126,22 +126,17 @@ struct battery_thresh spitz_battery_levels_noac[] = { /* * Read MAX1111 ADC */ +extern int max1111_read_channel(int); + int sharpsl_pm_pxa_read_max1111(int channel) { if (machine_is_tosa()) // Ugly, better move this function into another module return 0; -#ifdef CONFIG_CORGI_SSP_DEPRECATED - return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 - | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); -#else - extern int max1111_read_channel(int); - /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ return max1111_read_channel(channel >> 1); -#endif } void sharpsl_pm_pxa_init(void) -- 1.6.0.4

1 0