Alsa-devel December 2009

alsa-devel@alsa-project.org

114 participants
232 discussions

[alsa-devel] [PATCH 2/3] ASoC: fsi: Add fsi_get_dai to get snd_soc_dai
by Kuninori Morimoto 28 Dec '09

28 Dec '09

Signed-off-by: Kuninori Morimoto <morimoto.kuninori(a)renesas.com> --- sound/soc/sh/fsi.c | 10 ++++++++-- 1 files changed, 8 insertions(+), 2 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 4337afc..099fc8c 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -210,11 +210,17 @@ static int fsi_is_port_a(struct fsi_priv *fsi) return fsi->master->base == fsi->base; } -static struct fsi_priv *fsi_get_priv(struct snd_pcm_substream *substream) +static struct snd_soc_dai *fsi_get_dai(struct snd_pcm_substream *substream) { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct snd_soc_dai_link *machine = rtd->dai; - struct snd_soc_dai *dai = machine->cpu_dai; + + return machine->cpu_dai; +} + +static struct fsi_priv *fsi_get_priv(struct snd_pcm_substream *substream) +{ + struct snd_soc_dai *dai = fsi_get_dai(substream); return dai->private_data; } -- 1.6.3.3

1 0

[alsa-devel] [PATCH 0/3] ASoC: fsi: Add over/under run error operatoin
by Kuninori Morimoto 28 Dec '09

28 Dec '09

Dear Mark These patches add over/under run error settlement support Kuninori Morimoto (3): ASoC: fsi: Add over_period flag to prevent the misunderstanding ASoC: fsi: Add fsi_get_dai to get snd_soc_dai ASoC: fsi: Add over/under run error settlement 1st patch modify un-understandable operation. 2nd patch add new function for 3rd patch Best regards -- Kuninori Morimoto

1 0

[alsa-devel] [PATCH 3/3] sound: usb-audio: relax urb data align. restriction HVR-950Q and HVR-850 only
by johnsgruber＠gmail.com 27 Dec '09

27 Dec '09

From: John S. Gruber <JohnSGruber(a)gmail.com> Detect the HVR-950Q HVR-850 urb data alignment quirk using usbquirk.h rather than using a case statement in snd_usb_audio_probe. Signed-off-by: John S. Gruber <JohnSGruber(a)gmail.com> --- sound/usb/usbaudio.c | 30 ++++++------ sound/usb/usbaudio.h | 1 + sound/usb/usbquirks.h | 114 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 130 insertions(+), 15 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index be6f017..0cfff95 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -3152,6 +3152,18 @@ static int ignore_interface_quirk(struct snd_usb_audio *chip, return 0; } +/* + * Allow alignment on audio sub-slot (channel samples) rather than + * on audio slots (audio frames) + */ +static int create_align_transfer_quirk(struct snd_usb_audio *chip, + struct usb_interface *iface, + const struct snd_usb_audio_quirk *quirk) +{ + chip->txfr_quirk = 1; + return 1; /* Continue with creating streams and mixer */ +} + /* * boot quirks @@ -3326,7 +3338,8 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, [QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk, - [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk + [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk, + [QUIRK_AUDIO_ALIGN_TRANSFER] = create_align_transfer_quirk }; if (quirk->type < QUIRK_TYPE_COUNT) { @@ -3580,20 +3593,7 @@ static void *snd_usb_audio_probe(struct usb_device *dev, } } - switch (chip->usb_id) { - case USB_ID(0x2040, 0x7200): /* Hauppage hvr950Q */ - case USB_ID(0x2040, 0x7221): /* Hauppage hvr950Q */ - case USB_ID(0x2040, 0x7222): /* Hauppage hvr950Q */ - case USB_ID(0x2040, 0x7223): /* Hauppage hvr950Q */ - case USB_ID(0x2040, 0x7224): /* Hauppage hvr950Q */ - case USB_ID(0x2040, 0x7225): /* Hauppage hvr950Q */ - case USB_ID(0x2040, 0x7230): /* Hauppage hvr850 */ - case USB_ID(0x2040, 0x7250): /* Hauppage hvr950Q */ - chip->txfr_quirk = 1; - break; - default: - chip->txfr_quirk = 0; - } + chip->txfr_quirk = 0; err = 1; /* continue */ if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) { /* need some special handlings */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 228da06..9c88f60 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -161,6 +161,7 @@ enum quirk_type { QUIRK_AUDIO_FIXED_ENDPOINT, QUIRK_AUDIO_EDIROL_UA1000, QUIRK_AUDIO_EDIROL_UAXX, + QUIRK_AUDIO_ALIGN_TRANSFER, QUIRK_TYPE_COUNT }; diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index bd6706c..65bbd22 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -2074,6 +2074,120 @@ YAMAHA_DEVICE(0x7010, "UB99"), } }, +/* Hauppauge HVR-950Q and HVR-850 */ +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7200), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7201), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7202), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7203), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7204), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7205), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7250), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-950Q", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, +{ + USB_DEVICE_VENDOR_SPEC(0x2040, 0x7230), + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL, + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .vendor_name = "Hauppauge", + .product_name = "HVR-850", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_AUDIO_ALIGN_TRANSFER, + } +}, + { /* * Some USB MIDI devices don't have an audio control interface, -- 1.6.3.3

1 0

[alsa-devel] [PATCH 2/3] sound: usb-audio: relax urb data align. restriction HVR-950Q and HVR-850 only
by johnsgruber＠gmail.com 27 Dec '09

27 Dec '09

From: John S. Gruber <JohnSGruber(a)gmail.com> Addressing audio quality problem. In sound/usb/usbaudio.c, for the Hauppage HVR-950Q and HVR-850 only, change retire_capture_urb to allow transfers on audio sub-slot boundaries rather than audio slots boundaries. With these devices the left and right channel samples can be split between two different urbs. Throwing away extra channel samples causes a sound quality problem for stereo streams as the left and right channels are swapped repeatedly, perhaps many times per second. Urbs unaligned on sub-slot boundaries are still truncated to the next lowest stride (audio slot) to retain synchronization on samples even though left/right channel synchronization may be lost in this case. Detect the quirk using a case statement in snd_usb_audio_probe. BugLink: https://bugs.launchpad.net/ubuntu/+bug/495745 Signed-off-by: John S. Gruber <JohnSGruber(a)gmail.com> --- sound/usb/usbaudio.c | 29 +++++++++++++++++++++++++++-- sound/usb/usbaudio.h | 1 + 2 files changed, 28 insertions(+), 2 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 1ba8f41..be6f017 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -169,6 +169,7 @@ struct snd_usb_substream { unsigned int curpacksize; /* current packet size in bytes (for capture) */ unsigned int curframesize; /* current packet size in frames (for capture) */ unsigned int fill_max: 1; /* fill max packet size always */ + unsigned int txfr_quirk:1; /* allow sub-frame alignment */ unsigned int fmt_type; /* USB audio format type (1-3) */ unsigned int running: 1; /* running status */ @@ -353,14 +354,23 @@ static int retire_capture_urb(struct snd_usb_substream *subs, snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status); // continue; } - frames = urb->iso_frame_desc[i].actual_length / stride; - bytes = frames * stride; + bytes = urb->iso_frame_desc[i].actual_length; + frames = bytes / stride; + if (!subs->txfr_quirk) + bytes = frames * stride; + if (bytes % (runtime->sample_bits >> 3) != 0) { + int oldbytes = bytes; + bytes = frames * stride; + snd_printdd(KERN_ERR "Corrected urb data len. %d->%d\n", + oldbytes, bytes); + } /* update the current pointer */ spin_lock_irqsave(&subs->lock, flags); oldptr = subs->hwptr_done; subs->hwptr_done += bytes; if (subs->hwptr_done >= runtime->buffer_size * stride) subs->hwptr_done -= runtime->buffer_size * stride; + frames = (bytes + (oldptr % stride)) / stride; subs->transfer_done += frames; if (subs->transfer_done >= runtime->period_size) { subs->transfer_done -= runtime->period_size; @@ -2189,6 +2199,7 @@ static void init_substream(struct snd_usb_stream *as, int stream, struct audiofo subs->stream = as; subs->direction = stream; subs->dev = as->chip->dev; + subs->txfr_quirk = as->chip->txfr_quirk; if (snd_usb_get_speed(subs->dev) == USB_SPEED_FULL) { subs->ops = audio_urb_ops[stream]; } else { @@ -3569,6 +3580,20 @@ static void *snd_usb_audio_probe(struct usb_device *dev, } } + switch (chip->usb_id) { + case USB_ID(0x2040, 0x7200): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7221): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7222): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7223): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7224): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7225): /* Hauppage hvr950Q */ + case USB_ID(0x2040, 0x7230): /* Hauppage hvr850 */ + case USB_ID(0x2040, 0x7250): /* Hauppage hvr950Q */ + chip->txfr_quirk = 1; + break; + default: + chip->txfr_quirk = 0; + } err = 1; /* continue */ if (quirk && quirk->ifnum != QUIRK_NO_INTERFACE) { /* need some special handlings */ diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index 9826337..228da06 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -125,6 +125,7 @@ struct snd_usb_audio { struct snd_card *card; u32 usb_id; int shutdown; + unsigned int txfr_quirk:1; /* Subframe boundaries on transfers */ int num_interfaces; int num_suspended_intf; -- 1.6.3.3

1 0

[alsa-devel] [PATCH 1/3] sound: usb-audio: make buffer pointer based on bytes instead on frames
by johnsgruber＠gmail.com 27 Dec '09

27 Dec '09

From: Clemens Ladisch <clemens(a)ladisch.de> Since there are devices that do not align the size of their data packets to frame boundaries, the driver needs to be able to keep track of partial frames. This patch prepares for support for such devices by changing the hwptr_done variable from a frame counter to a byte counter. Signed-off-by: Clemens Ladisch <clemens(a)ladisch.de> --- sound/usb/usbaudio.c | 76 ++++++++++++++++++++++++------------------------- 1 files changed, 37 insertions(+), 39 deletions(-) diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index 31b63ea..1ba8f41 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -173,7 +173,7 @@ struct snd_usb_substream { unsigned int running: 1; /* running status */ - unsigned int hwptr_done; /* processed frame position in the buffer */ + unsigned int hwptr_done; /* processed byte position in the buffer */ unsigned int transfer_done; /* processed frames since last period update */ unsigned long active_mask; /* bitmask of active urbs */ unsigned long unlink_mask; /* bitmask of unlinked urbs */ @@ -342,7 +342,7 @@ static int retire_capture_urb(struct snd_usb_substream *subs, unsigned long flags; unsigned char *cp; int i; - unsigned int stride, len, oldptr; + unsigned int stride, frames, bytes, oldptr; int period_elapsed = 0; stride = runtime->frame_bits >> 3; @@ -353,29 +353,28 @@ static int retire_capture_urb(struct snd_usb_substream *subs, snd_printd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status); // continue; } - len = urb->iso_frame_desc[i].actual_length / stride; - if (! len) - continue; + frames = urb->iso_frame_desc[i].actual_length / stride; + bytes = frames * stride; /* update the current pointer */ spin_lock_irqsave(&subs->lock, flags); oldptr = subs->hwptr_done; - subs->hwptr_done += len; - if (subs->hwptr_done >= runtime->buffer_size) - subs->hwptr_done -= runtime->buffer_size; - subs->transfer_done += len; + subs->hwptr_done += bytes; + if (subs->hwptr_done >= runtime->buffer_size * stride) + subs->hwptr_done -= runtime->buffer_size * stride; + subs->transfer_done += frames; if (subs->transfer_done >= runtime->period_size) { subs->transfer_done -= runtime->period_size; period_elapsed = 1; } spin_unlock_irqrestore(&subs->lock, flags); /* copy a data chunk */ - if (oldptr + len > runtime->buffer_size) { - unsigned int cnt = runtime->buffer_size - oldptr; - unsigned int blen = cnt * stride; - memcpy(runtime->dma_area + oldptr * stride, cp, blen); - memcpy(runtime->dma_area, cp + blen, len * stride - blen); + if (oldptr + bytes > runtime->buffer_size * stride) { + unsigned int bytes1 = + runtime->buffer_size * stride - oldptr; + memcpy(runtime->dma_area + oldptr, cp, bytes1); + memcpy(runtime->dma_area, cp + bytes1, bytes - bytes1); } else { - memcpy(runtime->dma_area + oldptr * stride, cp, len * stride); + memcpy(runtime->dma_area + oldptr, cp, bytes); } } if (period_elapsed) @@ -562,24 +561,24 @@ static int prepare_playback_urb(struct snd_usb_substream *subs, struct snd_pcm_runtime *runtime, struct urb *urb) { - int i, stride, offs; - unsigned int counts; + int i, stride; + unsigned int counts, frames, bytes; unsigned long flags; int period_elapsed = 0; struct snd_urb_ctx *ctx = urb->context; stride = runtime->frame_bits >> 3; - offs = 0; + frames = 0; urb->dev = ctx->subs->dev; /* we need to set this at each time */ urb->number_of_packets = 0; spin_lock_irqsave(&subs->lock, flags); for (i = 0; i < ctx->packets; i++) { counts = snd_usb_audio_next_packet_size(subs); /* set up descriptor */ - urb->iso_frame_desc[i].offset = offs * stride; + urb->iso_frame_desc[i].offset = frames * stride; urb->iso_frame_desc[i].length = counts * stride; - offs += counts; + frames += counts; urb->number_of_packets++; subs->transfer_done += counts; if (subs->transfer_done >= runtime->period_size) { @@ -589,7 +588,7 @@ static int prepare_playback_urb(struct snd_usb_substream *subs, if (subs->transfer_done > 0) { /* FIXME: fill-max mode is not * supported yet */ - offs -= subs->transfer_done; + frames -= subs->transfer_done; counts -= subs->transfer_done; urb->iso_frame_desc[i].length = counts * stride; @@ -599,7 +598,7 @@ static int prepare_playback_urb(struct snd_usb_substream *subs, if (i < ctx->packets) { /* add a transfer delimiter */ urb->iso_frame_desc[i].offset = - offs * stride; + frames * stride; urb->iso_frame_desc[i].length = 0; urb->number_of_packets++; } @@ -609,26 +608,25 @@ static int prepare_playback_urb(struct snd_usb_substream *subs, if (period_elapsed) /* finish at the period boundary */ break; } - if (subs->hwptr_done + offs > runtime->buffer_size) { + bytes = frames * stride; + if (subs->hwptr_done + bytes > runtime->buffer_size * stride) { /* err, the transferred area goes over buffer boundary. */ - unsigned int len = runtime->buffer_size - subs->hwptr_done; + unsigned int bytes1 = + runtime->buffer_size * stride - subs->hwptr_done; memcpy(urb->transfer_buffer, - runtime->dma_area + subs->hwptr_done * stride, - len * stride); - memcpy(urb->transfer_buffer + len * stride, - runtime->dma_area, - (offs - len) * stride); + runtime->dma_area + subs->hwptr_done, bytes1); + memcpy(urb->transfer_buffer + bytes1, + runtime->dma_area, bytes - bytes1); } else { memcpy(urb->transfer_buffer, - runtime->dma_area + subs->hwptr_done * stride, - offs * stride); + runtime->dma_area + subs->hwptr_done, bytes); } - subs->hwptr_done += offs; - if (subs->hwptr_done >= runtime->buffer_size) - subs->hwptr_done -= runtime->buffer_size; - runtime->delay += offs; + subs->hwptr_done += bytes; + if (subs->hwptr_done >= runtime->buffer_size * stride) + subs->hwptr_done -= runtime->buffer_size * stride; + runtime->delay += frames; spin_unlock_irqrestore(&subs->lock, flags); - urb->transfer_buffer_length = offs * stride; + urb->transfer_buffer_length = bytes; if (period_elapsed) snd_pcm_period_elapsed(subs->pcm_substream); return 0; @@ -901,18 +899,18 @@ static int wait_clear_urbs(struct snd_usb_substream *subs) /* - * return the current pcm pointer. just return the hwptr_done value. + * return the current pcm pointer. just based on the hwptr_done value. */ static snd_pcm_uframes_t snd_usb_pcm_pointer(struct snd_pcm_substream *substream) { struct snd_usb_substream *subs; - snd_pcm_uframes_t hwptr_done; + unsigned int hwptr_done; subs = (struct snd_usb_substream *)substream->runtime->private_data; spin_lock(&subs->lock); hwptr_done = subs->hwptr_done; spin_unlock(&subs->lock); - return hwptr_done; + return hwptr_done / (substream->runtime->frame_bits >> 3); } -- 1.6.3.3

1 0

[alsa-devel] CONFIG_GCD is never defined in the latest alsa-driver
by Ozan Çağlayan 26 Dec '09

26 Dec '09

Hi, Compiling the latest alsa-driver with kernel > 2.6.31 results in gcd() symbol duplication. Although there's a check in configure for linux/gcd.h, no boolean is adjusted according to that. In acore/wrappers.c, gcd() is exported if CONFIG_GCD is not defined which seems always the case for now. Something like the following fixes the problem for me: Index: alsa-driver/acore/wrappers.c =================================================================== --- alsa-driver.orig/acore/wrappers.c +++ alsa-driver/acore/wrappers.c @@ -339,7 +339,7 @@ char *compat_skip_spaces(const char *str EXPORT_SYMBOL(compat_skip_spaces); #endif /* < 2.6.33 */ -#ifndef CONFIG_GCD +#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 31) /* Greatest common divisor */ unsigned long gcd(unsigned long a, unsigned long b) { @@ -356,4 +356,4 @@ unsigned long gcd(unsigned long a, unsig return b; } EXPORT_SYMBOL(gcd); -#endif /* !CONFIG_GCD */ +#endif Thanks!

2 3

[PATCH] Don't define gcd() when already exists
by Takashi Iwai 26 Dec '09

26 Dec '09

Define compatible gcd() only when linux/gcd. doesn't exist. CONFIG_GCD isn't defined for 2.6.31/32, so it can'be used reliablty as the compile condition. Reported-by: Ozan Çağlayan <ozan(a)pardus.org.tr> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> --- acore/wrappers.c | 3 +++ include/gcd_compat.h | 1 + 2 files changed, 4 insertions(+), 0 deletions(-) diff --git a/acore/wrappers.c b/acore/wrappers.c index e9478bd..68750a7 100644 --- a/acore/wrappers.c +++ b/acore/wrappers.c @@ -340,6 +340,8 @@ EXPORT_SYMBOL(compat_skip_spaces); #endif /* < 2.6.33 */ #ifndef CONFIG_GCD +#include <linux/gcd.h> +#ifdef CONFIG_SND_COMPAT_GCD /* Greatest common divisor */ unsigned long gcd(unsigned long a, unsigned long b) { @@ -356,4 +358,5 @@ unsigned long gcd(unsigned long a, unsigned long b) return b; } EXPORT_SYMBOL(gcd); +#endif /* CONFIG_SND_COMPAT_GCD */ #endif /* !CONFIG_GCD */ diff --git a/include/gcd_compat.h b/include/gcd_compat.h index beeda05..daedab1 100644 --- a/include/gcd_compat.h +++ b/include/gcd_compat.h @@ -1,6 +1,7 @@ #ifndef _LINUX_GCD_H #define _LINUX_GCD_H +#define CONFIG_SND_COMPAT_GCD unsigned long gcd(unsigned long a, unsigned long b); #endif /* _LINUX_GCD_H */ -- 1.6.5.7

1 0

[alsa-devel] [PATCH] sound/arm: Fix build failure caused by missing struct aaci definition
by Peter Huewe 26 Dec '09

26 Dec '09

From: Peter Huewe <peterhuewe(a)gmx.de> This patch fixes a build failure introduced by the patch ALSA: AACI: factor common hw_params logic into aaci_pcm_hw_params [1] by adding/moving the aaci struct to the right position. The patch mentioned above merged common source parts into one function, but unfortunately left out the aaci struct and consequently caused a build failure e.g. for arm versatile_config [2] References: [1] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdi… [2] http://kisskb.ellerman.id.au/kisskb/buildresult/1893605/ Patch against Linus' tree. Signed-off-by: Peter Huewe <peterhuewe(a)gmx.de> --- sound/arm/aaci.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-) diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c index c569986..656e474 100644 --- a/sound/arm/aaci.c +++ b/sound/arm/aaci.c @@ -441,6 +441,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { int err; + struct aaci *aaci = substream->private_data; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { @@ -560,7 +561,6 @@ static int aaci_pcm_open(struct snd_pcm_substream *substream) static int aaci_pcm_playback_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; unsigned int channels = params_channels(params); int ret; @@ -659,7 +659,6 @@ static struct snd_pcm_ops aaci_playback_ops = { static int aaci_pcm_capture_hw_params(struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) { - struct aaci *aaci = substream->private_data; struct aaci_runtime *aacirun = substream->runtime->private_data; int ret; -- 1.6.4.4

2 1

Re: [alsa-devel] [PATCH] Recognise and use subdevice 0x3061 found in some HP dv6 notebooks.
by Kunal Gangakhedkar 26 Dec '09

26 Dec '09

On Wednesday 23 Dec 2009 12:02:47 am Kunal Gangakhedkar wrote: > On Monday 14 Dec 2009 4:02:58 pm Takashi Iwai wrote: > > At Mon, 14 Dec 2009 15:53:54 +0530, > > Kunal Gangakhedkar wrote: > > > > > > On Monday 14 Dec 2009 3:37:14 pm Takashi Iwai wrote: > > > > At Mon, 14 Dec 2009 00:29:42 +0530, > > > > Kunal Gangakhedkar wrote: > > > > > > > > > > Obvious patch. > > > > > Recently bought an HP Pavilion dv6-1110ax notebook. The modparm 'model=hp-dv5' > > > > > works, but I thought it was better if it were natively supported. > > > > > > > > > > Also, the 'hp_detect=1' hint > > > > > (echo "hp_detect = 1" > /sys/class/sound/hwC0D0/hints) works nicely to mute the > > > > > speakers when using the headphone jack(s). Is there any way to automatically > > > > > enable this? > > > > > > > > This is weird. hp_detect is basically always set unless you clear > > > > explicitly. I guess it's simply a known IRQ problem on HP dv > > > > laptops. It requires MSI. > > > > > > > > Anyway, could you test the very latest kernel without your patch and > > > > confirm that the change is still needed? > > > > > > > > > > The patch wasn't about hp_detect. It was to get the subdev recognised natively so that > > > you don't need the 'model=hp-dv5' modparm. > > > > Yeah, I know. But the speaker-muting should work even without > > hp_detect=1 hints. The IRQ thingy was only about the auto-muting. > > > > Also, with the latest version, the device might work even without the > > extra model option (as the auto-parser got improved). I'd like to > > avoid unneeded quirk lines as much as possible, so that's why I asked > > to check the latest one. > > > > > I'll try with enable_msi modparm as well without trying the hp_detect hint and let you know > > > about it. Will also try the latest kernel. > > > > Thanks! > > > > > > Takashi > > > > Sorry for the late reply - was busy with office work. > Just built the kernel from your git (sound-2.6.git) master > (as of commit 07e23a669544942a9154b64c583bdef014f66a15). > > This new driver didn't require 'model=hp-dv5' modparm - it did detect and > use my card properly; so, my patch is not needed anymore, I guess :) > > However, the hp_detect=1 problem still persists :(. > I had to use the "echo 'hp_detect=1' > /sys/class/sound/hwC0D0/hints" > method to get the auto-muting to work. > It's also true with enable_msi=1 modparm. > > Anything more you want me to try? > > Thanks, > Kunal > Also, "spec->gpio_led = 0x08" in patch_sigmatel.c seems to enable the colour changing (orange/white) of the mute/unmute button. I got this info from ubuntu's lucid kernel which somehow enabled the behaviour. But, it was missing from the sound-2.6.git master kernel that I built. I'll do more digging to see why it isn't working in the git kernel. This is the code that I copied from lucid kernel into linux-backports-modules that enabled the led behaviour: if ((codec->subsystem_id >> 16) == PCI_VENDOR_ID_HP) { const struct dmi_device *dev = NULL; while ((dev = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, NULL, dev))) { if (strcmp(dev->name, "HP_Mute_LED_1")) { switch (codec->vendor_id) { case 0x111d7608: spec->gpio_led = 0x01; break; case 0x111d7600: case 0x111d7601: case 0x111d7602: case 0x111d7603: /* <-- My codec STAC 92HD75B3X5 */ spec->gpio_led = 0x08; break; } break; } } } Thanks, Kunal

2 4

[alsa-devel] [PATCH] jazz16: refine dma and irq selection
by Krzysztof Helt 25 Dec '09

25 Dec '09

From: Krzysztof Helt <krzysztof.h1(a)wp.pl> Narrow the dma and irq selection after the DOS driver. Add ALSA configuration description as well. Signed-off-by: Krzysztof Helt <krzysztof.h1(a)wp.pl> --- The dma8 must be 8-bit otherwise the 8-bit sound played through 16-bit dma has metalic noise. The 8-bit DMA cannot play 16-bit sound. Documentation/sound/alsa/ALSA-Configuration.txt | 15 +++++++++++++++ sound/isa/sb/jazz16.c | 21 ++++++++++++++++++++- sound/isa/sb/sb8_main.c | 3 ++- 3 files changed, 37 insertions(+), 2 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 8923597..92b0975 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1123,6 +1123,21 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports multiple cards, autoprobe and ISA PnP. + Module snd-jazz16 + ------------------- + + Module for Media Vision Jazz16 chipset. The chipset consists of 3 chips: + MVD1216 + MVA416 + MVA514. + + port - port # for SB DSP chip (0x210,0x220,0x230,0x240,0x250,0x260) + irq - IRQ # for SB DSP chip (3,5,7,9,10,15) + dma8 - DMA # for SB DSP chip (1,3) + dma16 - DMA # for SB DSP chip (5,7) + mpu_port - MPU-401 port # (0x300,0x310,0x320,0x330) + mpu_irq - MPU-401 irq # (2,3,5,7) + + This module supports multiple cards. + Module snd-korg1212 ------------------- diff --git a/sound/isa/sb/jazz16.c b/sound/isa/sb/jazz16.c index d52966b..8d21a3f 100644 --- a/sound/isa/sb/jazz16.c +++ b/sound/isa/sb/jazz16.c @@ -189,10 +189,29 @@ static int __devinit snd_jazz16_match(struct device *devptr, unsigned int dev) if (port[dev] == SNDRV_AUTO_PORT) { snd_printk(KERN_ERR "please specify port\n"); return 0; + } else if (port[dev] == 0x200 || (port[dev] & ~0x270)) { + snd_printk(KERN_ERR "incorrect port specified\n"); + return 0; + } + if (dma8[dev] != SNDRV_AUTO_DMA && + dma8[dev] != 1 && dma8[dev] != 3) { + snd_printk(KERN_ERR "dma8 must be 1 or 3\n"); + return 0; } if (dma16[dev] != SNDRV_AUTO_DMA && dma16[dev] != 5 && dma16[dev] != 7) { - snd_printk(KERN_ERR "dma16 must be 5 or 7"); + snd_printk(KERN_ERR "dma16 must be 5 or 7\n"); + return 0; + } + if (mpu_port[dev] != SNDRV_AUTO_PORT && + (mpu_port[dev] & ~0x030) != 0x300) { + snd_printk(KERN_ERR "incorrect mpu_port specified\n"); + return 0; + } + if (mpu_irq[dev] != SNDRV_AUTO_DMA && + mpu_irq[dev] != 2 && mpu_irq[dev] != 3 && + mpu_irq[dev] != 5 && mpu_irq[dev] != 7) { + snd_printk(KERN_ERR "mpu_irq must be 2, 3, 5 or 7\n"); return 0; } return 1; diff --git a/sound/isa/sb/sb8_main.c b/sound/isa/sb/sb8_main.c index 3222aed..7d84c9f 100644 --- a/sound/isa/sb/sb8_main.c +++ b/sound/isa/sb/sb8_main.c @@ -510,7 +510,8 @@ static int snd_sb8_open(struct snd_pcm_substream *substream) } switch (chip->hardware) { case SB_HW_JAZZ16: - runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE; + if (chip->dma16 == 5 || chip->dma16 == 7) + runtime->hw.formats |= SNDRV_PCM_FMTBIT_S16_LE; runtime->hw.rates |= SNDRV_PCM_RATE_8000_48000; runtime->hw.rate_min = 4000; runtime->hw.rate_max = 50000; -- 1.6.4 ---------------------------------------------------------------------- Sprawdz sekrety swojego biorytmu. Kliknij >> http://link.interia.pl/f2534

2 1

← Newer
1
2
3
4
5
6
7
8
9
...
24
Older →

Jump to page:

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

Alsa-devel December 2009