April 2008 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 001/003] snd-powermac: enable headphone detection
by Risto Suominen 15 Apr '08

15 Apr '08

From: Risto Suominen <Risto.Suominen at gmail.com> Enable port change interrupt while initialising AWACS, Screamer, and Burgundy chipsets. Signed-off-by: Risto Suominen <Risto.Suominen at gmail.com> --- Kernel version 2.6.25-rc8 (probably any 2.6) --- sound/ppc/pmac.c.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/pmac.c 2008-04-07 12:18:47.503077312 +0300 @@ -214,7 +214,7 @@ static int snd_pmac_pcm_prepare(struct s int rate_index; long offset; struct pmac_stream *astr; - + rec->dma_size = snd_pcm_lib_buffer_bytes(subs); rec->period_size = snd_pcm_lib_period_bytes(subs); rec->nperiods = rec->dma_size / rec->period_size; @@ -643,7 +643,7 @@ static int snd_pmac_pcm_close(struct snd /* reset constraints */ astr->cur_freqs = chip->freqs_ok; astr->cur_formats = chip->formats_ok; - + return 0; } @@ -1063,6 +1063,10 @@ static int __init snd_pmac_detect(struct else { struct pci_dev *pdev = NULL; +#ifndef for_each_pci_dev +#define for_each_pci_dev(d) \ + while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL) +#endif for_each_pci_dev(pdev) { struct device_node *np = pci_device_to_OF_node(pdev); if (np && np == macio->of_node) { @@ -1300,9 +1304,9 @@ int __init snd_pmac_new(struct snd_card snd_pmac_sound_feature(chip, 1); - /* reset */ - if (chip->model == PMAC_AWACS) - out_le32(&chip->awacs->control, 0x11); + /* reset & enable interrupts */ + if (chip->model <= PMAC_BURGUNDY) + out_le32(&chip->awacs->control, chip->control_mask); /* Powerbooks have odd ways of enabling inputs such as an expansion-bay CD or sound from an internal modem

2 2

[alsa-devel] ac97_bus: exports duplicate symbol ac97_bus_type (owned by kernel)
by Vitaly V. Ch 15 Apr '08

15 Apr '08

#modprobe snd_via82xx #dmesg|tail ac97_bus: exports duplicate symbol ac97_bus_type (owned by kernel) snd_ac97_codec: disagrees about version of symbol ac97_bus_type snd_ac97_codec: Unknown symbol ac97_bus_type snd_via82xx: Unknown symbol snd_ac97_resume snd_via82xx: Unknown symbol snd_ac97_set_rate snd_via82xx: Unknown symbol snd_ac97_update_bits snd_via82xx: Unknown symbol snd_ac97_mixer snd_via82xx: Unknown symbol snd_ac97_bus snd_via82xx: Unknown symbol snd_ac97_update_power snd_via82xx: Unknown symbol snd_ac97_suspend snd_via82xx: Unknown symbol snd_ac97_get_short_name snd_via82xx: Unknown symbol snd_ac97_tune_hardware any ideas? \\wbr Vitaly

1 0

[alsa-devel] PXA AC97 updates
by Mark Brown 15 Apr '08

15 Apr '08

This patch series fixes a bug in the currently queued conversion of the PXA AC97 drivers to the clock API and adds support for AC97 on PXA3xx SoCs. Takashi, since these changes build on things currently queued in the ARM tree for 2.6.26, including ARM-specific changes, it's probably best to merge via there if that's OK?

3 10

Re: [alsa-devel] no front speaker sound with ALC262
by Rene Dohmen 15 Apr '08

15 Apr '08

Tobin, Did you receive the unit? I'm wondering if you had some progress already. Greets, Rene Op Mar 31, 2008, om 3:30 PM heeft Tobin Davis het volgende geschreven: > Yes, it would. Hmmm > > Well, I hope they send the unit today. > > Tobin > > On Mon, 2008-03-31 at 13:57 +0200, Rene Dohmen wrote: >> >> with the preinstalled win XP the sound is working OK. >> So that would rule out hardware problems with the soundcard. >> >> >> Rene >> >> >> >> >> >> >> Op Mar 28, 2008, om 7:28 PM heeft Tobin Davis het volgende >> geschreven: >> >>> I'm still waiting for my demo unit from Tangent. Latest update >>> is they think it may be a hardware issue (missing a resistor). I >>> should know more Monday. If this is the case, then the driver >>> should work with very minor modifications (subsystem ID addition). >>> >>> Tobin >>> >>> >>> On Tue, 2008-03-25 at 11:40 +0100, Rene Dohmen wrote: >>>> >>>> Op Mar 22, 2008, om 8:09 PM heeft Tobin Davis het volgende >>>> geschreven: >>>> >>>>> Rene, don't bother bugging Tangent. I have a demo unit on the >>>>> way. My first priority is getting the driver working. >>>>> >>>>> Tangent really won't help much - their a distributor, not the >>>>> OEM. This is an MSI Crystal 945 in a Tangent shell. >>>>> >>>> >>>> >>>> I know that the system is actually a Crystal 945. I got the >>>> touchscreen working via a dev driver from salt (so not tangent) >>>> On the mainboard there is a conenctor: JFP1that goes to the >>>> ms4088 board. The mainboard connects to: >>>> - power led >>>> - hdd led >>>> - speakers >>>> - main power switch >>>> >>>> >>>> I can provide you with some photoos if you like. >>>> >>>> >>>> As stated earlier: the sound is working by with very low volume >>>> levels >>>> >>>> >>>> >>>> >>>>> If you want to try something, see if the bios can be reflashed >>>>> with the Crystal 945 firmware. >>>>> >>>> >>>> >>>> I sound working with the original crystal? I don't think tangent >>>> has flshed their BIOS to another version. >>>> In the crystal 945 specs I found that the're using a Realtek >>>> ALC262 with azalia codec, maybe this helps. >>>> >>>> >>>> Rene >>>> >>>> >>>> >>>>> As to the speaker board, where on the main board is it >>>>> mounted? Is the header labeled? How many pins? It sounds >>>>> like the speakers may be on the front panel header, which would >>>>> make them function like headphones. Or this board is custom >>>>> build for this application and I don't know what I'm talking >>>>> about. >>>>> >>>>> Tobin >>>>> >>>>> >>>>> On Sat, 2008-03-22 at 18:59 +0100, Rene Dohmen wrote: >>>>>> >>>>>> Hi Guys, >>>>>> >>>>>> I'm glad t o read that there are other people with the same >>>>>> problem >>>>>> on the same system. >>>>>> I just opened my Tangent 8000S and it has indeed a MSI mainboard: >>>>>> MS7290. The speakers are connected to a small custom board: >>>>>> MS-4088 >>>>>> There's no extra chip on this customboard and the board is >>>>>> directly >>>>>> connected to the mainboard. So probably the signal leaving the >>>>>> mainboard in amplified already. (or there's a amplifier >>>>>> builtin the >>>>>> speakers) >>>>>> >>>>>> Next week i'll have some time to put tangent under some more >>>>>> pressure >>>>>> for info, so maybe that will speed up things a little bit. >>>>>> >>>>>> Grz Rene >>>>>> >>>>>> _______________________________________________ >>>>>> Alsa-devel mailing list >>>>>> Alsa-devel(a)alsa-project.org >>>>>> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel >>>>> -- Tobin Davis >>>>> >>>>> love, n.: >>>>> When you don't want someone too close--because you're very >>>>> sensitive >>>>> to pleasure. >>>> >>> -- Tobin Davis >>> >>> I can hire one half of the working class to kill the other half. >>> -- Jay Gould >> >> > -- Tobin Davis > > He is no lawyer who cannot take two sides.

2 1

[alsa-devel] dB, dB and more dB....
by Tom Watson 15 Apr '08

15 Apr '08

I find all of this an interesting discussion, and it looks like: 1) People want to hear some output. 2) "Pro" people don't want to blow up speakers. <soapbox> As was said before it is all relative. I wrote an application using ALSA and also needed to allow it to play back CDs at the same level. What I did was take a sample WAV file and burn it to a CD. It had several levels, from full scale, and 3dB (divide by 2) down. It was quite informative for setting mixer levels. I needed it because, while I was using an "add-in" board (M-Audio Revo 7.1), the CD drive was connected to the internal motherboard input place. I used a small jumper plug to connect the output of the motherboard audio out to the Revo7.1 board "in" and setup mixers accordingly. I ended up using a scope to get the levels correct, without overloading (distorting) the audio path. Quite informative. It seems that all of us have differing ideas on "what to expect" when it comes to audio interfaces. Twenty years ago, these problems really didn't exist, since computer audio was in its infancy, but now audio is everywhere, and it muct be accounted for. Alsa's implementation of having audio MUTED on initialization (startup) is a good one, and many distributions have init scripts that take over from there, restoring old values. While not ideal (just set the audio to where I want it!), it is about the best we can do. The "pro" guy who doesn't want to blow up his speakers, I can only offer a suggestion. What do you do when plugging in and out "normal" audio equipment. Most of the time I turn down the level control since my big fat fingers will end up touching the tip/ring of the audio connector and LOTS of hum results. If you don't do this, you may have a PEBKAC problem which I (or any other developer) can solve. I think we are all chasing a problem that really doesn't exist. As for dB, some people refer to 0dB as "full scale". Some refer to it as 0 VU. Some make it out to be 1-v p-p. Go figure. The biggest problem is that crazy people think "louder" is better. It isn't! A small "white paper" on the subject (part of ALSA?) with an agreed upon "introduction to computer audio" might be a good place to start. Hopefully no more than a couple of pages in terms that everyone can understand. </soapbox> -- Tom Watson tsw(a)johana.com ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

2 1

[alsa-devel] [PATCH] ASoC: Add support for 19.2 MHz MCLK in TLV320AIC3X
by Jarkko Nikula 15 Apr '08

15 Apr '08

Signed-off-by: Jarkko Nikula <jarkko.nikula(a)nokia.com> --- sound/soc/codecs/tlv320aic3x.c | 11 +++++++++++ 1 files changed, 11 insertions(+), 0 deletions(-) diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c index e6a730b..630684f 100644 --- a/sound/soc/codecs/tlv320aic3x.c +++ b/sound/soc/codecs/tlv320aic3x.c @@ -661,42 +661,52 @@ struct aic3x_rate_divs { static const struct aic3x_rate_divs aic3x_divs[] = { /* 8k */ {12000000, 8000, 48000, 0xa, 16, 3840}, + {19200000, 8000, 48000, 0xa, 10, 2400}, {22579200, 8000, 48000, 0xa, 8, 7075}, {33868800, 8000, 48000, 0xa, 5, 8049}, /* 11.025k */ {12000000, 11025, 44100, 0x6, 15, 528}, + {19200000, 11025, 44100, 0x6, 9, 4080}, {22579200, 11025, 44100, 0x6, 8, 0}, {33868800, 11025, 44100, 0x6, 5, 3333}, /* 16k */ {12000000, 16000, 48000, 0x4, 16, 3840}, + {19200000, 16000, 48000, 0x4, 10, 2400}, {22579200, 16000, 48000, 0x4, 8, 7075}, {33868800, 16000, 48000, 0x4, 5, 8049}, /* 22.05k */ {12000000, 22050, 44100, 0x2, 15, 528}, + {19200000, 22050, 44100, 0x2, 9, 4080}, {22579200, 22050, 44100, 0x2, 8, 0}, {33868800, 22050, 44100, 0x2, 5, 3333}, /* 32k */ {12000000, 32000, 48000, 0x1, 16, 3840}, + {19200000, 32000, 48000, 0x1, 10, 2400}, {22579200, 32000, 48000, 0x1, 8, 7075}, {33868800, 32000, 48000, 0x1, 5, 8049}, /* 44.1k */ {12000000, 44100, 44100, 0x0, 15, 528}, + {19200000, 44100, 44100, 0x0, 9, 4080}, {22579200, 44100, 44100, 0x0, 8, 0}, {33868800, 44100, 44100, 0x0, 5, 3333}, /* 48k */ {12000000, 48000, 48000, 0x0, 16, 3840}, + {19200000, 48000, 48000, 0x0, 10, 2400}, {22579200, 48000, 48000, 0x0, 8, 7075}, {33868800, 48000, 48000, 0x0, 5, 8049}, /* 64k */ {12000000, 64000, 96000, 0x1, 16, 3840}, + {19200000, 64000, 96000, 0x1, 10, 2400}, {22579200, 64000, 96000, 0x1, 8, 7075}, {33868800, 64000, 96000, 0x1, 5, 8049}, /* 88.2k */ {12000000, 88200, 88200, 0x0, 15, 528}, + {19200000, 88200, 88200, 0x0, 9, 4080}, {22579200, 88200, 88200, 0x0, 8, 0}, {33868800, 88200, 88200, 0x0, 5, 3333}, /* 96k */ {12000000, 96000, 96000, 0x0, 16, 3840}, + {19200000, 96000, 96000, 0x0, 10, 2400}, {22579200, 96000, 96000, 0x0, 8, 7075}, {33868800, 96000, 96000, 0x0, 5, 8049}, }; @@ -818,6 +828,7 @@ static int aic3x_set_dai_sysclk(struct snd_soc_codec_dai *codec_dai, switch (freq) { case 12000000: + case 19200000: case 22579200: case 33868800: aic3x->sysclk = freq; -- 1.5.4.4

2 3

[alsa-devel] Patchmix-style application for EMU cards
by Camilo Polymeris 15 Apr '08

15 Apr '08

Hello I am working on a graphical mixing/routing application for the Emu10k series of semi-pro soundcards, but I am having trouble figuring out the routing mechanism of the driver, specially the "Multichannel PCM" part. Is there any technical documentation on this card I could read (I haven't found any), or maybe the driver developer can help me out? Thanks, Camilo.

1 0

[alsa-devel] line6usb in alsa
by Aldrin Martoq 15 Apr '08

15 Apr '08

There is a "driver" which I long wanted to be in official alsa: line6usb. http://www.tanzband-scream.at/line6/ While the code exists, I looked at it and in my opinion it's not ready for inclusion in alsa. For example, there is some MIDI code which belongs to userspace but it's in the kernel module. I have already contacted the maintainer of the project, so we can make this happen. My question are: - what "communication" steps do we need to put this code here? - do we have to put the initial line6usb support in one single patch or a step by step is preferred? - once the code is here, how can we improve it or make changes? - any other trap we could avoid right now? any suggestion of how can we make this the smoothest way possible? Thanks a lot! -- Aldrin Martoq Episodio 002 (Lunes 24 Marzo)! http://aldrinvideopodcast.podshow.com/

1 0

[alsa-devel] via82xx: how to get microphone working?
by Németh Márton 14 Apr '08

14 Apr '08

Hi, I have a Clevo D410J laptop with the following integrated sound card: 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50) Subsystem: CLEVO/KAPOK Computer Unknown device 4702 Flags: medium devsel, IRQ 20 I/O ports at 1400 [size=256] Capabilities: [c0] Power Management version 2 Kernel driver in use: VIA 82xx Audio Kernel modules: snd-via82xx There is also an integrated modem which also appears in kmix/alsamixer: 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80) Subsystem: CLEVO/KAPOK Computer Unknown device 4702 Flags: medium devsel, IRQ 20 I/O ports at 1800 [size=256] Capabilities: [d0] Power Management version 2 Kernel driver in use: VIA 82xx Modem Kernel modules: snd-via82xx-modem I am using Linux 2.6.23. I enabled the microphone input, increased the microphone record level to maximum, and enabled "Mic Boost". I can hear my voice through the speakers, but I cannot record sound (for example Skype cannot record my sound). The playback is working fine without any problem. Is there any setting I miss? $ lsmod |grep snd snd_via82xx 22572 1 snd_mpu401_uart 7064 1 snd_via82xx snd_seq_oss 29328 0 snd_seq_midi 6432 0 snd_seq_midi_event 6536 2 snd_seq_oss,snd_seq_midi snd_via82xx_modem 11408 1 snd_ac97_codec 95676 2 snd_via82xx,snd_via82xx_modem ac97_bus 2432 1 snd_ac97_codec snd_pcm_oss 38208 0 snd_mixer_oss 14216 1 snd_pcm_oss snd_seq 45752 5 snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_pcm 69420 4 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss snd_timer 19356 2 snd_seq,snd_pcm snd_rawmidi 19136 2 snd_mpu401_uart,snd_seq_midi snd_seq_device 6932 4 snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi snd 45476 16 snd_via82xx,snd_mpu401_uart,snd_seq_oss,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_seq,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device snd_page_alloc 8072 3 snd_via82xx,snd_via82xx_modem,snd_pcm soundcore 6496 1 snd Regards, Márton Németh

2 2

[alsa-devel] [PATCH 003/003] snd-powermac: Burgundy mixers for B&W and iMac
by Risto Suominen 14 Apr '08

14 Apr '08

From: Risto Suominen <Risto.Suominen at gmail.com> Add mixer controls and correct headphone detection bits for PowerMac G3 B&W and iMac G3 Tray-loading, both having Burgundy chipset. Signed-off-by: Risto Suominen <Risto.Suominen at gmail.com> --- Kernel version 2.6.25-rc8 (probably any 2.6) --- sound/ppc/burgundy.c.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/burgundy.c 2008-04-07 12:00:20.893307568 +0300 @@ -102,7 +102,8 @@ snd_pmac_burgundy_rcw(struct snd_pmac *c } static void -snd_pmac_burgundy_wcb(struct snd_pmac *chip, unsigned int addr, unsigned int val) +snd_pmac_burgundy_wcb(struct snd_pmac *chip, unsigned int addr, + unsigned int val) { out_le32(&chip->awacs->codec_ctrl, addr + 0x300000 + (val & 0xff)); snd_pmac_burgundy_busy_wait(chip); @@ -126,8 +127,11 @@ snd_pmac_burgundy_rcb(struct snd_pmac *c return val; } +#define BASE2ADDR(base) ((base) << 12) +#define ADDR2BASE(addr) ((addr) >> 12) + /* - * Burgundy volume: 0 - 100, stereo + * Burgundy volume: 0 - 100, stereo, word reg */ static void snd_pmac_burgundy_write_volume(struct snd_pmac *chip, unsigned int address, @@ -168,13 +172,6 @@ snd_pmac_burgundy_read_volume(struct snd volume[1] = 0; } - -/* - */ - -#define BASE2ADDR(base) ((base) << 12) -#define ADDR2BASE(addr) ((addr) >> 12) - static int snd_pmac_burgundy_info_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo) { @@ -191,8 +188,8 @@ static int snd_pmac_burgundy_get_volume( struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); int shift = (kcontrol->private_value >> 8) & 0xff; - snd_pmac_burgundy_read_volume(chip, addr, ucontrol->value.integer.value, - shift); + snd_pmac_burgundy_read_volume(chip, addr, + ucontrol->value.integer.value, shift); return 0; } @@ -204,24 +201,163 @@ static int snd_pmac_burgundy_put_volume( int shift = (kcontrol->private_value >> 8) & 0xff; long nvoices[2]; - snd_pmac_burgundy_write_volume(chip, addr, ucontrol->value.integer.value, - shift); + snd_pmac_burgundy_write_volume(chip, addr, + ucontrol->value.integer.value, shift); snd_pmac_burgundy_read_volume(chip, addr, nvoices, shift); return (nvoices[0] != ucontrol->value.integer.value[0] || nvoices[1] != ucontrol->value.integer.value[1]); } -#define BURGUNDY_VOLUME(xname, xindex, addr, shift) \ +#define BURGUNDY_VOLUME_W(xname, xindex, addr, shift) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex,\ .info = snd_pmac_burgundy_info_volume,\ .get = snd_pmac_burgundy_get_volume,\ .put = snd_pmac_burgundy_put_volume,\ .private_value = ((ADDR2BASE(addr) & 0xff) | ((shift) << 8)) } -/* lineout/speaker */ +/* + * Burgundy volume: 0 - 100, stereo, 2-byte reg + */ +static void +snd_pmac_burgundy_write_volume_2b(struct snd_pmac *chip, unsigned int address, + long *volume, int off) +{ + int lvolume, rvolume; + + off |= off << 2; + lvolume = volume[0] ? volume[0] + BURGUNDY_VOLUME_OFFSET : 0; + rvolume = volume[1] ? volume[1] + BURGUNDY_VOLUME_OFFSET : 0; + + snd_pmac_burgundy_wcb(chip, address + off, lvolume); + snd_pmac_burgundy_wcb(chip, address + off + 0x500, rvolume); +} + +static void +snd_pmac_burgundy_read_volume_2b(struct snd_pmac *chip, unsigned int address, + long *volume, int off) +{ + volume[0] = snd_pmac_burgundy_rcb(chip, address + off); + if (volume[0] >= BURGUNDY_VOLUME_OFFSET) + volume[0] -= BURGUNDY_VOLUME_OFFSET; + else + volume[0] = 0; + volume[1] = snd_pmac_burgundy_rcb(chip, address + off + 0x100); + if (volume[1] >= BURGUNDY_VOLUME_OFFSET) + volume[1] -= BURGUNDY_VOLUME_OFFSET; + else + volume[1] = 0; +} + +static int snd_pmac_burgundy_info_volume_2b(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = 2; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 100; + return 0; +} + +static int snd_pmac_burgundy_get_volume_2b(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); + unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); + int off = kcontrol->private_value & 0x300; + snd_pmac_burgundy_read_volume_2b(chip, addr, + ucontrol->value.integer.value, off); + return 0; +} + +static int snd_pmac_burgundy_put_volume_2b(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); + unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); + int off = kcontrol->private_value & 0x300; + long nvoices[2]; + + snd_pmac_burgundy_write_volume_2b(chip, addr, + ucontrol->value.integer.value, off); + snd_pmac_burgundy_read_volume_2b(chip, addr, nvoices, off); + return (nvoices[0] != ucontrol->value.integer.value[0] || + nvoices[1] != ucontrol->value.integer.value[1]); +} + +#define BURGUNDY_VOLUME_2B(xname, xindex, addr, off) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex,\ + .info = snd_pmac_burgundy_info_volume_2b,\ + .get = snd_pmac_burgundy_get_volume_2b,\ + .put = snd_pmac_burgundy_put_volume_2b,\ + .private_value = ((ADDR2BASE(addr) & 0xff) | ((off) << 8)) } + +/* + * Burgundy gain/attenuation: 0 - 15, mono/stereo, byte reg + */ +static int snd_pmac_burgundy_info_gain(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) +{ + int stereo = (kcontrol->private_value >> 24) & 1; + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = stereo + 1; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 15; + return 0; +} + +static int snd_pmac_burgundy_get_gain(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); + unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); + int stereo = (kcontrol->private_value >> 24) & 1; + int atten = (kcontrol->private_value >> 25) & 1; + int oval; + + oval = snd_pmac_burgundy_rcb(chip, addr); + if (atten) + oval = ~oval & 0xff; + ucontrol->value.integer.value[0] = oval & 0xf; + if (stereo) + ucontrol->value.integer.value[1] = (oval >> 4) & 0xf; + return 0; +} -static int snd_pmac_burgundy_info_switch_out(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) +static int snd_pmac_burgundy_put_gain(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); + unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); + int stereo = (kcontrol->private_value >> 24) & 1; + int atten = (kcontrol->private_value >> 25) & 1; + int oval, val; + + oval = snd_pmac_burgundy_rcb(chip, addr); + if (atten) + oval = ~oval & 0xff; + val = ucontrol->value.integer.value[0]; + if (stereo) + val |= ucontrol->value.integer.value[1] << 4; + else + val |= ucontrol->value.integer.value[0] << 4; + if (atten) + val = ~val & 0xff; + snd_pmac_burgundy_wcb(chip, addr, val); + return val != oval; +} + +#define BURGUNDY_VOLUME_B(xname, xindex, addr, stereo, atten) \ +{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex,\ + .info = snd_pmac_burgundy_info_gain,\ + .get = snd_pmac_burgundy_get_gain,\ + .put = snd_pmac_burgundy_put_gain,\ + .private_value = (ADDR2BASE(addr) | ((stereo) << 24) | ((atten) << 25)) } + +/* + * Burgundy switch: 0/1, mono/stereo, word reg + */ +static int snd_pmac_burgundy_info_switch_w(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) { int stereo = (kcontrol->private_value >> 24) & 1; uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; @@ -231,111 +367,207 @@ static int snd_pmac_burgundy_info_switch return 0; } -static int snd_pmac_burgundy_get_switch_out(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +static int snd_pmac_burgundy_get_switch_w(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) { struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); - int lmask = kcontrol->private_value & 0xff; - int rmask = (kcontrol->private_value >> 8) & 0xff; + unsigned int addr = BASE2ADDR((kcontrol->private_value >> 16) & 0xff); + int lmask = 1 << (kcontrol->private_value & 0xff); + int rmask = 1 << ((kcontrol->private_value >> 8) & 0xff); int stereo = (kcontrol->private_value >> 24) & 1; - int val = snd_pmac_burgundy_rcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES); + int val = snd_pmac_burgundy_rcw(chip, addr); ucontrol->value.integer.value[0] = (val & lmask) ? 1 : 0; if (stereo) ucontrol->value.integer.value[1] = (val & rmask) ? 1 : 0; return 0; } -static int snd_pmac_burgundy_put_switch_out(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +static int snd_pmac_burgundy_put_switch_w(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) { struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); - int lmask = kcontrol->private_value & 0xff; - int rmask = (kcontrol->private_value >> 8) & 0xff; + unsigned int addr = BASE2ADDR((kcontrol->private_value >> 16) & 0xff); + int lmask = 1 << (kcontrol->private_value & 0xff); + int rmask = 1 << ((kcontrol->private_value >> 8) & 0xff); int stereo = (kcontrol->private_value >> 24) & 1; int val, oval; - oval = snd_pmac_burgundy_rcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES); - val = oval & ~(lmask | rmask); + oval = snd_pmac_burgundy_rcw(chip, addr); + val = oval & ~(lmask | (stereo ? rmask : 0)); if (ucontrol->value.integer.value[0]) val |= lmask; if (stereo && ucontrol->value.integer.value[1]) val |= rmask; - snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, val); + snd_pmac_burgundy_wcw(chip, addr, val); return val != oval; } -#define BURGUNDY_OUTPUT_SWITCH(xname, xindex, lmask, rmask, stereo) \ +#define BURGUNDY_SWITCH_W(xname, xindex, addr, lbit, rbit, stereo) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex,\ - .info = snd_pmac_burgundy_info_switch_out,\ - .get = snd_pmac_burgundy_get_switch_out,\ - .put = snd_pmac_burgundy_put_switch_out,\ - .private_value = ((lmask) | ((rmask) << 8) | ((stereo) << 24)) } - -/* line/speaker output volume */ -static int snd_pmac_burgundy_info_volume_out(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_info *uinfo) + .info = snd_pmac_burgundy_info_switch_w,\ + .get = snd_pmac_burgundy_get_switch_w,\ + .put = snd_pmac_burgundy_put_switch_w,\ + .private_value = ((lbit) | ((rbit) << 8)\ + | (ADDR2BASE(addr) << 16) | ((stereo) << 24)) } + +/* + * Burgundy switch: 0/1, mono/stereo, byte reg, bit mask + */ +static int snd_pmac_burgundy_info_switch_b(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_info *uinfo) { int stereo = (kcontrol->private_value >> 24) & 1; - uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = stereo + 1; uinfo->value.integer.min = 0; - uinfo->value.integer.max = 15; + uinfo->value.integer.max = 1; return 0; } -static int snd_pmac_burgundy_get_volume_out(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +static int snd_pmac_burgundy_get_switch_b(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) { struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); - unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); + unsigned int addr = BASE2ADDR((kcontrol->private_value >> 16) & 0xff); + int lmask = kcontrol->private_value & 0xff; + int rmask = (kcontrol->private_value >> 8) & 0xff; int stereo = (kcontrol->private_value >> 24) & 1; - int oval; - - oval = ~snd_pmac_burgundy_rcb(chip, addr) & 0xff; - ucontrol->value.integer.value[0] = oval & 0xf; + int val = snd_pmac_burgundy_rcb(chip, addr); + ucontrol->value.integer.value[0] = (val & lmask) ? 1 : 0; if (stereo) - ucontrol->value.integer.value[1] = (oval >> 4) & 0xf; + ucontrol->value.integer.value[1] = (val & rmask) ? 1 : 0; return 0; } -static int snd_pmac_burgundy_put_volume_out(struct snd_kcontrol *kcontrol, - struct snd_ctl_elem_value *ucontrol) +static int snd_pmac_burgundy_put_switch_b(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) { struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); - unsigned int addr = BASE2ADDR(kcontrol->private_value & 0xff); + unsigned int addr = BASE2ADDR((kcontrol->private_value >> 16) & 0xff); + int lmask = kcontrol->private_value & 0xff; + int rmask = (kcontrol->private_value >> 8) & 0xff; int stereo = (kcontrol->private_value >> 24) & 1; - unsigned int oval, val; - - oval = ~snd_pmac_burgundy_rcb(chip, addr) & 0xff; - val = ucontrol->value.integer.value[0] & 15; - if (stereo) - val |= (ucontrol->value.integer.value[1] & 15) << 4; - else - val |= val << 4; - val = ~val & 0xff; + int val, oval; + oval = snd_pmac_burgundy_rcb(chip, addr); + val = oval & ~(lmask | rmask); + if (ucontrol->value.integer.value[0]) + val |= lmask; + if (stereo && ucontrol->value.integer.value[1]) + val |= rmask; snd_pmac_burgundy_wcb(chip, addr, val); return val != oval; } -#define BURGUNDY_OUTPUT_VOLUME(xname, xindex, addr, stereo) \ +#define BURGUNDY_SWITCH_B(xname, xindex, addr, lmask, rmask, stereo) \ { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, .index = xindex,\ - .info = snd_pmac_burgundy_info_volume_out,\ - .get = snd_pmac_burgundy_get_volume_out,\ - .put = snd_pmac_burgundy_put_volume_out,\ - .private_value = (ADDR2BASE(addr) | ((stereo) << 24)) } + .info = snd_pmac_burgundy_info_switch_b,\ + .get = snd_pmac_burgundy_get_switch_b,\ + .put = snd_pmac_burgundy_put_switch_b,\ + .private_value = ((lmask) | ((rmask) << 8)\ + | (ADDR2BASE(addr) << 16) | ((stereo) << 24)) } +/* + * Burgundy mixers + */ static struct snd_kcontrol_new snd_pmac_burgundy_mixers[] __initdata = { - BURGUNDY_VOLUME("Master Playback Volume", 0, MASK_ADDR_BURGUNDY_MASTER_VOLUME, 8), - BURGUNDY_VOLUME("Line Playback Volume", 0, MASK_ADDR_BURGUNDY_VOLLINE, 16), - BURGUNDY_VOLUME("CD Playback Volume", 0, MASK_ADDR_BURGUNDY_VOLCD, 16), - BURGUNDY_VOLUME("Mic Playback Volume", 0, MASK_ADDR_BURGUNDY_VOLMIC, 16), - BURGUNDY_OUTPUT_VOLUME("PC Speaker Playback Volume", 0, MASK_ADDR_BURGUNDY_ATTENHP, 0), - /*BURGUNDY_OUTPUT_VOLUME("PCM Playback Volume", 0, MASK_ADDR_BURGUNDY_ATTENLINEOUT, 1),*/ - BURGUNDY_OUTPUT_VOLUME("Headphone Playback Volume", 0, MASK_ADDR_BURGUNDY_ATTENSPEAKER, 1), -}; -static struct snd_kcontrol_new snd_pmac_burgundy_master_sw __initdata = -BURGUNDY_OUTPUT_SWITCH("Headphone Playback Switch", 0, BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); -static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw __initdata = -BURGUNDY_OUTPUT_SWITCH("PC Speaker Playback Switch", 0, BURGUNDY_OUTPUT_INTERN, 0, 0); + BURGUNDY_VOLUME_W("Master Playback Volume", 0, + MASK_ADDR_BURGUNDY_MASTER_VOLUME, 8), + BURGUNDY_VOLUME_W("CD Capture Volume", 0, + MASK_ADDR_BURGUNDY_VOLCD, 16), + BURGUNDY_VOLUME_2B("Input Capture Volume", 0, + MASK_ADDR_BURGUNDY_VOLMIX01, 2), + BURGUNDY_VOLUME_2B("Mixer Playback Volume", 0, + MASK_ADDR_BURGUNDY_VOLMIX23, 0), + BURGUNDY_VOLUME_B("CD Gain Capture Volume", 0, + MASK_ADDR_BURGUNDY_GAINCD, 1, 0), + BURGUNDY_SWITCH_W("Master Capture Switch", 0, + MASK_ADDR_BURGUNDY_OUTPUTENABLES, 24, 0, 0), + BURGUNDY_SWITCH_W("CD Capture Switch", 0, + MASK_ADDR_BURGUNDY_CAPTURESELECTS, 0, 16, 1), + BURGUNDY_SWITCH_W("CD Playback Switch", 0, + MASK_ADDR_BURGUNDY_OUTPUTSELECTS, 0, 16, 1), +/* BURGUNDY_SWITCH_W("Loop Capture Switch", 0, + * MASK_ADDR_BURGUNDY_CAPTURESELECTS, 8, 24, 1), + * BURGUNDY_SWITCH_B("Mixer out Capture Switch", 0, + * MASK_ADDR_BURGUNDY_HOSTIFAD, 0x02, 0, 0), + * BURGUNDY_SWITCH_B("Mixer Capture Switch", 0, + * MASK_ADDR_BURGUNDY_HOSTIFAD, 0x01, 0, 0), + * BURGUNDY_SWITCH_B("PCM out Capture Switch", 0, + * MASK_ADDR_BURGUNDY_HOSTIFEH, 0x02, 0, 0), + */ BURGUNDY_SWITCH_B("PCM Capture Switch", 0, + MASK_ADDR_BURGUNDY_HOSTIFEH, 0x01, 0, 0) +}; +static struct snd_kcontrol_new snd_pmac_burgundy_mixers_imac[] __initdata = { + BURGUNDY_VOLUME_W("Line in Capture Volume", 0, + MASK_ADDR_BURGUNDY_VOLLINE, 16), + BURGUNDY_VOLUME_W("Mic Capture Volume", 0, + MASK_ADDR_BURGUNDY_VOLMIC, 16), + BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0, + MASK_ADDR_BURGUNDY_GAINLINE, 1, 0), + BURGUNDY_VOLUME_B("Mic Gain Capture Volume", 0, + MASK_ADDR_BURGUNDY_GAINMIC, 1, 0), + BURGUNDY_VOLUME_B("PC Speaker Playback Volume", 0, + MASK_ADDR_BURGUNDY_ATTENSPEAKER, 1, 1), + BURGUNDY_VOLUME_B("Line out Playback Volume", 0, + MASK_ADDR_BURGUNDY_ATTENLINEOUT, 1, 1), + BURGUNDY_VOLUME_B("Headphone Playback Volume", 0, + MASK_ADDR_BURGUNDY_ATTENHP, 1, 1), + BURGUNDY_SWITCH_W("Line in Capture Switch", 0, + MASK_ADDR_BURGUNDY_CAPTURESELECTS, 1, 17, 1), + BURGUNDY_SWITCH_W("Mic Capture Switch", 0, + MASK_ADDR_BURGUNDY_CAPTURESELECTS, 2, 18, 1), + BURGUNDY_SWITCH_W("Line in Playback Switch", 0, + MASK_ADDR_BURGUNDY_OUTPUTSELECTS, 1, 17, 1), + BURGUNDY_SWITCH_W("Mic Playback Switch", 0, + MASK_ADDR_BURGUNDY_OUTPUTSELECTS, 2, 18, 1), + BURGUNDY_SWITCH_B("Mic Boost Capture Switch", 0, + MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) +}; +static struct snd_kcontrol_new snd_pmac_burgundy_mixers_pmac[] __initdata = { + BURGUNDY_VOLUME_W("Line in Capture Volume", 0, + MASK_ADDR_BURGUNDY_VOLMIC, 16), + BURGUNDY_VOLUME_B("Line in Gain Capture Volume", 0, + MASK_ADDR_BURGUNDY_GAINMIC, 1, 0), + BURGUNDY_VOLUME_B("PC Speaker Playback Volume", 0, + MASK_ADDR_BURGUNDY_ATTENMONO, 0, 1), + BURGUNDY_VOLUME_B("Line out Playback Volume", 0, + MASK_ADDR_BURGUNDY_ATTENSPEAKER, 1, 1), + BURGUNDY_SWITCH_W("Line in Capture Switch", 0, + MASK_ADDR_BURGUNDY_CAPTURESELECTS, 2, 18, 1), + BURGUNDY_SWITCH_W("Line in Playback Switch", 0, + MASK_ADDR_BURGUNDY_OUTPUTSELECTS, 2, 18, 1), +/* BURGUNDY_SWITCH_B("Line in Boost Capture Switch", 0, + * MASK_ADDR_BURGUNDY_INPBOOST, 0x40, 0x80, 1) */ +}; +static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_imac __initdata = +BURGUNDY_SWITCH_B("Master Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_OUTPUT_LEFT | BURGUNDY_LINEOUT_LEFT | BURGUNDY_HP_LEFT, + BURGUNDY_OUTPUT_RIGHT | BURGUNDY_LINEOUT_RIGHT | BURGUNDY_HP_RIGHT, 1); +static struct snd_kcontrol_new snd_pmac_burgundy_master_sw_pmac __initdata = +BURGUNDY_SWITCH_B("Master Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_OUTPUT_INTERN + | BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); +static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_imac __initdata = +BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); +static struct snd_kcontrol_new snd_pmac_burgundy_speaker_sw_pmac __initdata = +BURGUNDY_SWITCH_B("PC Speaker Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_OUTPUT_INTERN, 0, 0); +static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_imac __initdata = +BURGUNDY_SWITCH_B("Line out Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_LINEOUT_LEFT, BURGUNDY_LINEOUT_RIGHT, 1); +static struct snd_kcontrol_new snd_pmac_burgundy_line_sw_pmac __initdata = +BURGUNDY_SWITCH_B("Line out Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_OUTPUT_LEFT, BURGUNDY_OUTPUT_RIGHT, 1); +static struct snd_kcontrol_new snd_pmac_burgundy_hp_sw_imac __initdata = +BURGUNDY_SWITCH_B("Headphone Playback Switch", 0, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, + BURGUNDY_HP_LEFT, BURGUNDY_HP_RIGHT, 1); #ifdef PMAC_SUPPORT_AUTOMUTE @@ -347,19 +579,30 @@ static int snd_pmac_burgundy_detect_head return (in_le32(&chip->awacs->codec_stat) & chip->hp_stat_mask) ? 1 : 0; } -static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, int do_notify) +static void snd_pmac_burgundy_update_automute(struct snd_pmac *chip, + int do_notify) { if (chip->auto_mute) { + int imac = machine_is_compatible("iMac"); int reg, oreg; - reg = oreg = snd_pmac_burgundy_rcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES); - reg &= ~(BURGUNDY_OUTPUT_LEFT | BURGUNDY_OUTPUT_RIGHT | BURGUNDY_OUTPUT_INTERN); + reg = oreg = snd_pmac_burgundy_rcb(chip, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES); + reg &= imac ? ~(BURGUNDY_OUTPUT_LEFT | BURGUNDY_OUTPUT_RIGHT + | BURGUNDY_HP_LEFT | BURGUNDY_HP_RIGHT) + : ~(BURGUNDY_OUTPUT_LEFT | BURGUNDY_OUTPUT_RIGHT + | BURGUNDY_OUTPUT_INTERN); if (snd_pmac_burgundy_detect_headphone(chip)) - reg |= BURGUNDY_OUTPUT_LEFT | BURGUNDY_OUTPUT_RIGHT; + reg |= imac ? (BURGUNDY_HP_LEFT | BURGUNDY_HP_RIGHT) + : (BURGUNDY_OUTPUT_LEFT + | BURGUNDY_OUTPUT_RIGHT); else - reg |= BURGUNDY_OUTPUT_INTERN; + reg |= imac ? (BURGUNDY_OUTPUT_LEFT + | BURGUNDY_OUTPUT_RIGHT) + : (BURGUNDY_OUTPUT_INTERN); if (do_notify && reg == oreg) return; - snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, reg); + snd_pmac_burgundy_wcb(chip, + MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, reg); if (do_notify) { snd_ctl_notify(chip->card, SNDRV_CTL_EVENT_MASK_VALUE, &chip->master_sw_ctl->id); @@ -378,6 +621,7 @@ static void snd_pmac_burgundy_update_aut */ int __init snd_pmac_burgundy_init(struct snd_pmac *chip) { + int imac = machine_is_compatible("iMac"); int i, err; /* Checks to see the chip is alive and kicking */ @@ -386,7 +630,7 @@ int __init snd_pmac_burgundy_init(struct return 1; } - snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_OUTPUTENABLES, + snd_pmac_burgundy_wcw(chip, MASK_ADDR_BURGUNDY_OUTPUTENABLES, DEF_BURGUNDY_OUTPUTENABLES); snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_MORE_OUTPUTENABLES, DEF_BURGUNDY_MORE_OUTPUTENABLES); @@ -396,7 +640,8 @@ int __init snd_pmac_burgundy_init(struct snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_INPSEL21, DEF_BURGUNDY_INPSEL21); snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_INPSEL3, - DEF_BURGUNDY_INPSEL3); + imac ? DEF_BURGUNDY_INPSEL3_IMAC + : DEF_BURGUNDY_INPSEL3_PMAC); snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_GAINCD, DEF_BURGUNDY_GAINCD); snd_pmac_burgundy_wcb(chip, MASK_ADDR_BURGUNDY_GAINLINE, @@ -422,23 +667,51 @@ int __init snd_pmac_burgundy_init(struct snd_pmac_burgundy_wcw(chip, MASK_ADDR_BURGUNDY_VOLMIC, DEF_BURGUNDY_VOLMIC); - if (chip->hp_stat_mask == 0) + if (chip->hp_stat_mask == 0) { /* set headphone-jack detection bit */ - chip->hp_stat_mask = 0x04; - + if (imac) + chip->hp_stat_mask = BURGUNDY_HPDETECT_IMAC_UPPER + | BURGUNDY_HPDETECT_IMAC_LOWER + | BURGUNDY_HPDETECT_IMAC_SIDE; + else + chip->hp_stat_mask = BURGUNDY_HPDETECT_PMAC_BACK; + } /* * build burgundy mixers */ strcpy(chip->card->mixername, "PowerMac Burgundy"); for (i = 0; i < ARRAY_SIZE(snd_pmac_burgundy_mixers); i++) { - if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_pmac_burgundy_mixers[i], chip))) < 0) + if ((err = snd_ctl_add(chip->card, + snd_ctl_new1(&snd_pmac_burgundy_mixers[i], chip))) < 0) + return err; + } + for (i = 0; i < (imac ? ARRAY_SIZE(snd_pmac_burgundy_mixers_imac) + : ARRAY_SIZE(snd_pmac_burgundy_mixers_pmac)); i++) { + if ((err = snd_ctl_add(chip->card, + snd_ctl_new1(imac ? &snd_pmac_burgundy_mixers_imac[i] + : &snd_pmac_burgundy_mixers_pmac[i], chip))) < 0) return err; } - chip->master_sw_ctl = snd_ctl_new1(&snd_pmac_burgundy_master_sw, chip); + chip->master_sw_ctl = snd_ctl_new1(imac + ? &snd_pmac_burgundy_master_sw_imac + : &snd_pmac_burgundy_master_sw_pmac, chip); if ((err = snd_ctl_add(chip->card, chip->master_sw_ctl)) < 0) return err; - chip->speaker_sw_ctl = snd_ctl_new1(&snd_pmac_burgundy_speaker_sw, chip); + chip->master_sw_ctl = snd_ctl_new1(imac + ? &snd_pmac_burgundy_line_sw_imac + : &snd_pmac_burgundy_line_sw_pmac, chip); + if ((err = snd_ctl_add(chip->card, chip->master_sw_ctl)) < 0) + return err; + if (imac) { + chip->master_sw_ctl = snd_ctl_new1( + &snd_pmac_burgundy_hp_sw_imac, chip); + if ((err = snd_ctl_add(chip->card, chip->master_sw_ctl)) < 0) + return err; + } + chip->speaker_sw_ctl = snd_ctl_new1(imac + ? &snd_pmac_burgundy_speaker_sw_imac + : &snd_pmac_burgundy_speaker_sw_pmac, chip); if ((err = snd_ctl_add(chip->card, chip->speaker_sw_ctl)) < 0) return err; #ifdef PMAC_SUPPORT_AUTOMUTE --- sound/ppc/burgundy.h.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/burgundy.h 2008-04-05 22:02:44.000000000 +0300 @@ -22,6 +22,7 @@ #ifndef __BURGUNDY_H #define __BURGUNDY_H +#define MASK_ADDR_BURGUNDY_INPBOOST (0x10 << 12) #define MASK_ADDR_BURGUNDY_INPSEL21 (0x11 << 12) #define MASK_ADDR_BURGUNDY_INPSEL3 (0x12 << 12) @@ -35,7 +36,10 @@ #define MASK_ADDR_BURGUNDY_VOLCH3 (0x22 << 12) #define MASK_ADDR_BURGUNDY_VOLCH4 (0x23 << 12) +#define MASK_ADDR_BURGUNDY_CAPTURESELECTS (0x2A << 12) #define MASK_ADDR_BURGUNDY_OUTPUTSELECTS (0x2B << 12) +#define MASK_ADDR_BURGUNDY_VOLMIX01 (0x2D << 12) +#define MASK_ADDR_BURGUNDY_VOLMIX23 (0x2E << 12) #define MASK_ADDR_BURGUNDY_OUTPUTENABLES (0x2F << 12) #define MASK_ADDR_BURGUNDY_MASTER_VOLUME (0x30 << 12) @@ -45,6 +49,10 @@ #define MASK_ADDR_BURGUNDY_ATTENSPEAKER (0x62 << 12) #define MASK_ADDR_BURGUNDY_ATTENLINEOUT (0x63 << 12) #define MASK_ADDR_BURGUNDY_ATTENHP (0x64 << 12) +#define MASK_ADDR_BURGUNDY_ATTENMONO (0x65 << 12) + +#define MASK_ADDR_BURGUNDY_HOSTIFAD (0x78 << 12) +#define MASK_ADDR_BURGUNDY_HOSTIFEH (0x79 << 12) #define MASK_ADDR_BURGUNDY_VOLCD (MASK_ADDR_BURGUNDY_VOLCH1) #define MASK_ADDR_BURGUNDY_VOLLINE (MASK_ADDR_BURGUNDY_VOLCH2) @@ -59,21 +67,22 @@ /* These are all default values for the burgundy */ #define DEF_BURGUNDY_INPSEL21 (0xAA) -#define DEF_BURGUNDY_INPSEL3 (0x0A) +#define DEF_BURGUNDY_INPSEL3_IMAC (0x0A) +#define DEF_BURGUNDY_INPSEL3_PMAC (0x05) #define DEF_BURGUNDY_GAINCD (0x33) #define DEF_BURGUNDY_GAINLINE (0x44) #define DEF_BURGUNDY_GAINMIC (0x44) #define DEF_BURGUNDY_GAINMODEM (0x06) -/* Remember: lowest volume here is 0x9b */ +/* Remember: lowest volume here is 0x9B (155) */ #define DEF_BURGUNDY_VOLCD (0xCCCCCCCC) #define DEF_BURGUNDY_VOLLINE (0x00000000) #define DEF_BURGUNDY_VOLMIC (0x00000000) #define DEF_BURGUNDY_VOLMODEM (0xCCCCCCCC) -#define DEF_BURGUNDY_OUTPUTSELECTS (0x010f010f) -#define DEF_BURGUNDY_OUTPUTENABLES (0x0A) +#define DEF_BURGUNDY_OUTPUTSELECTS (0x010F010F) +#define DEF_BURGUNDY_OUTPUTENABLES (0x0100000A) /* #define DEF_BURGUNDY_MASTER_VOLUME (0xFFFFFFFF) */ /* too loud */ #define DEF_BURGUNDY_MASTER_VOLUME (0xDDDDDDDD) @@ -84,12 +93,22 @@ #define DEF_BURGUNDY_ATTENLINEOUT (0xCC) #define DEF_BURGUNDY_ATTENHP (0xCC) -/* OUTPUTENABLES bits */ +/* MORE_OUTPUTENABLES bits */ #define BURGUNDY_OUTPUT_LEFT 0x02 #define BURGUNDY_OUTPUT_RIGHT 0x04 +#define BURGUNDY_LINEOUT_LEFT 0x08 +#define BURGUNDY_LINEOUT_RIGHT 0x10 +#define BURGUNDY_HP_LEFT 0x20 +#define BURGUNDY_HP_RIGHT 0x40 #define BURGUNDY_OUTPUT_INTERN 0x80 -/* volume offset */ +/* Headphone detection bits */ +#define BURGUNDY_HPDETECT_PMAC_BACK 0x04 +#define BURGUNDY_HPDETECT_IMAC_SIDE 0x04 +#define BURGUNDY_HPDETECT_IMAC_UPPER 0x08 +#define BURGUNDY_HPDETECT_IMAC_LOWER 0x01 + +/* Volume offset */ #define BURGUNDY_VOLUME_OFFSET 155 #endif /* __BURGUNDY_H */

1 0