April 2008 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH 6/6] sound/drivers/dummy.c: fix negative snd_pcm_format_width() check
by Roel Kluin 16 Apr '08

16 Apr '08

bps is unsigned, a negative snd_pcm_format_width() return value is not noticed Signed-off-by: Roel Kluin <12o3l(a)tiscali.nl> --- diff --git a/sound/drivers/dummy.c b/sound/drivers/dummy.c index a240eae..1c88977 100644 --- a/sound/drivers/dummy.c +++ b/sound/drivers/dummy.c @@ -230,13 +230,14 @@ static int snd_card_dummy_pcm_prepare(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; struct snd_dummy_pcm *dpcm = runtime->private_data; - unsigned int bps; + int bps; + + bps = snd_pcm_format_width(runtime->format) * runtime->rate * + runtime->channels / 8; - bps = runtime->rate * runtime->channels; - bps *= snd_pcm_format_width(runtime->format); - bps /= 8; if (bps <= 0) return -EINVAL; + dpcm->pcm_bps = bps; dpcm->pcm_jiffie = bps / HZ; dpcm->pcm_size = snd_pcm_lib_buffer_bytes(substream);

2 1

[alsa-devel] How to kill thread server_job() in snd_pcm_open()
by Rong-Jhe 16 Apr '08

16 Apr '08

I found that the thread server_job() can not be killed by using snd_pcm_close (). The code in snd_pcm_direct_server_discard() is disabled, and then it can not send signal to kill the thread. Why the code is disabled? Is there any bugs if I enable the code?

3 4

[alsa-devel] no sound with snd-hda-intel - error docu
by Ulrich Breymann 16 Apr '08

16 Apr '08

Dear Alsa-Developers, unfortunately I hear no sound at all with SuSE Linux 10.3. Volume is switched on (kmix). The hardware is ok, it functions with Windows. For your information I append - the content of /proc/asound/card0/codec#2 (file intelcodec.txt) - the result of command 'amixer -i' (file amixer_i.txt) - the result of command 'lspci -nv' (file lspci_nv.txt) and here the short results of some other commands: lspci | grep -i audio: 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) lsmod | grep hda_intel: snd_hda_intel 285212 1 snd_pcm 94852 2 snd_pcm_oss,snd_hda_intel snd 70452 9 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_pcm,snd_timer snd_page_alloc 26248 2 snd_hda_intel,snd_pcm rpm -qa | grep kernel: kernel-bigsmp-2.6.22.5-31 kernel-source-2.6.22.5-31 linux-kernel-headers-2.6.22-19 cat /etc/modprobe.d/sound: options snd-hda-intel enable=1 index=0 # u1Nb.Eq+LVzceV9F:82801I (ICH9 Family) HD Audio Controller alias snd-card-0 snd-hda-intel I hope this can help you (and later me & others). Best regards Uli content of /proc/asound/card0/codec#2 : Codec: SigmaTel STAC9274D Address: 2 Vendor Id: 0x83847621 Subsystem Id: 0x80860519 Revision Id: 0x100201 No Modem Function Group found Default PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0 Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1 Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x57 0x57] Power: 0x0 Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x2b 0x2b] Power: 0x0 Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x2b 0x49] Power: 0x0 Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x1f 0x1f] Power: 0x0 Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0xff 0xff] Power: 0x0 Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x1b Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x1c Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo Power: 0x0 Connection: 1 0x1d Node 0x0a [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x0221401f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green Pin-ctls: 0xc0: OUT HP Connection: 3 0x02* 0x03 0x06 Node 0x0b [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x02a1902e: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 3 0x02* 0x03 0x06 Node 0x0c [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x01813021: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue Pin-ctls: 0x20: IN Connection: 1 0x03 Node 0x0d [Pin Complex] wcaps 0x400181: Stereo Pincap 0x08173f: IN OUT HP Detect Pin Default 0x01114010: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Green Pin-ctls: 0x40: OUT Connection: 1 0x02 Node 0x0e [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x01a19020: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink Pin-ctls: 0x24: IN Connection: 1 0x04 Node 0x0f [Pin Complex] wcaps 0x400181: Stereo Pincap 0x081737: IN OUT Detect Pin Default 0x01111012: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x05 Node 0x10 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x01117011: [Jack] Speaker at Ext Rear Conn = 1/8, Color = Yellow Pin-ctls: 0x40: OUT Connection: 1 0x04 Node 0x11 [Pin Complex] wcaps 0x400181: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x400000fb: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Connection: 1 0x03 Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x500000fe: [N/A] Line Out at Int N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Node 0x13 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x500001ff: [N/A] Line Out at Int N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Node 0x14 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x500001fd: [N/A] Line Out at Int N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 9 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11 Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 9 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11 Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00] Connection: 9 0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11 Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x15 Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x16 Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In Amp-In caps: N/A Amp-In vals: [0x00 0x00] Connection: 1 0x17 Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Connection: 3 0x18* 0x13 0x14 Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 3 0x19* 0x13 0x14 Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Connection: 3 0x1a* 0x13 0x14 Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital PCM: rates [0x7e0]: 44100 48000 88200 96000 176400 192000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x5]: PCM AC3 Connection: 1 0x22 Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x01452130: [Jack] SPDIF Out at Ext Rear Conn = Optical, Color = Grey Pin-ctls: 0x40: OUT Connection: 5 0x1e* 0x1f 0x1b 0x1c 0x1d Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital Pincap 0x0810024: IN EAPD Detect Pin Default 0x400000fc: [N/A] Line Out at Ext N/A Conn = Unknown, Color = Unknown Pin-ctls: 0x00: Power: 0x0 Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0 Amp-Out vals: [0x00] Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono Simple mixer control 'PCM',0 Capabilities: pvolume Playback channels: Front Left - Front Right Limits: Playback 0 - 255 Mono: Front Left: Playback 122 [48%] [-26.60dB] Front Right: Playback 122 [48%] [-26.60dB] Simple mixer control 'Front',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 87 [69%] [-30.00dB] [on] Front Right: Playback 87 [69%] [-30.00dB] [on] Simple mixer control 'Surround',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 31 [24%] [-72.00dB] [on] Front Right: Playback 31 [24%] [-72.00dB] [on] Simple mixer control 'Center',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 127 Mono: Playback 43 [34%] [-63.00dB] [on] Simple mixer control 'LFE',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined Playback channels: Mono Limits: Playback 0 - 127 Mono: Playback 73 [57%] [-40.50dB] [on] Simple mixer control 'Side',0 Capabilities: pvolume pswitch Playback channels: Front Left - Front Right Limits: Playback 0 - 127 Mono: Front Left: Playback 43 [34%] [-63.00dB] [on] Front Right: Playback 43 [34%] [-63.00dB] [on] Simple mixer control 'Line In as Output',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [off] Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'ADCMux',0 Capabilities: cswitch Capture channels: Front Left - Front Right Front Left: Capture [on] Front Right: Capture [on] Simple mixer control 'InMux',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 4 Front Left: Capture 0 [0%] [0.00dB] Front Right: Capture 0 [0%] [0.00dB] Simple mixer control 'InVol',0 Capabilities: cvolume Capture channels: Front Left - Front Right Limits: Capture 0 - 14 Front Left: Capture 0 [0%] [0.00dB] Front Right: Capture 0 [0%] [0.00dB] Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Mic' 'Front Mic' 'Line' Item0: 'Mic' 00:00.0 Class 0600: 8086:29e0 (rev 01) Subsystem: 8086:5442 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:01.0 Class 0604: 8086:29e1 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: e0000000-e2ffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Capabilities: [88] Subsystem: 8086:5442 Capabilities: [80] Power Management version 3 Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [140] Unknown (5) 00:19.0 Class 0200: 8086:294c (rev 02) Subsystem: 8086:0001 Flags: bus master, fast devsel, latency 0, IRQ 220 Memory at e3200000 (32-bit, non-prefetchable) [size=128K] Memory at e3224000 (32-bit, non-prefetchable) [size=4K] I/O ports at 30e0 [size=32] Capabilities: [c8] Power Management version 2 Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+ Capabilities: [e0] Vendor Specific Information 00:1a.0 Class 0c03: 8086:2937 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 30c0 [size=32] Capabilities: [50] Vendor Specific Information 00:1a.1 Class 0c03: 8086:2938 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 30a0 [size=32] Capabilities: [50] Vendor Specific Information 00:1a.2 Class 0c03: 8086:2939 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 17 I/O ports at 3080 [size=32] Capabilities: [50] Vendor Specific Information 00:1a.7 Class 0c03: 8086:293c (rev 02) (prog-if 20 [EHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 17 Memory at e3225400 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port Capabilities: [98] Vendor Specific Information 00:1b.0 Class 0403: 8086:293e (rev 02) Subsystem: 8086:0519 Flags: bus master, fast devsel, latency 0, IRQ 23 Memory at e3220000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) 00:1c.0 Class 0604: 8086:2940 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e3300000-e33fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:2940 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1c.4 Class 0604: 8086:2948 (rev 02) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: e3100000-e31fffff Capabilities: [40] Express Root Port (Slot+) IRQ 0 Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ Capabilities: [90] Subsystem: 8086:2948 Capabilities: [a0] Power Management version 2 Capabilities: [100] Virtual Channel Capabilities: [180] Unknown (5) 00:1d.0 Class 0c03: 8086:2934 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 20 I/O ports at 3060 [size=32] Capabilities: [50] Vendor Specific Information 00:1d.1 Class 0c03: 8086:2935 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 21 I/O ports at 3040 [size=32] Capabilities: [50] Vendor Specific Information 00:1d.2 Class 0c03: 8086:2936 (rev 02) (prog-if 00 [UHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at 3020 [size=32] Capabilities: [50] Vendor Specific Information 00:1d.7 Class 0c03: 8086:293a (rev 02) (prog-if 20 [EHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0, IRQ 20 Memory at e3225000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port Capabilities: [98] Vendor Specific Information 00:1e.0 Class 0604: 8086:244e (rev 92) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 Memory behind bridge: e3000000-e30fffff Capabilities: [50] Subsystem: 8086:5442 00:1f.0 Class 0601: 8086:2916 (rev 02) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information 00:1f.2 Class 0101: 8086:2920 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: 8086:5442 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18 I/O ports at 3458 [size=8] I/O ports at 346c [size=4] I/O ports at 3450 [size=8] I/O ports at 3468 [size=4] I/O ports at 3430 [size=16] I/O ports at 3420 [size=16] Capabilities: [70] Power Management version 3 Capabilities: [b0] Vendor Specific Information 00:1f.3 Class 0c05: 8086:2930 (rev 02) Subsystem: 8086:5442 Flags: medium devsel, IRQ 19 Memory at e3225800 (64-bit, non-prefetchable) [size=256] I/O ports at 3000 [size=32] 00:1f.5 Class 0101: 8086:2926 (rev 02) (prog-if 85 [Master SecO PriO]) Subsystem: 8086:5442 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18 I/O ports at 3448 [size=8] I/O ports at 3464 [size=4] I/O ports at 3440 [size=8] I/O ports at 3460 [size=4] I/O ports at 3410 [size=16] I/O ports at 3400 [size=16] Capabilities: [70] Power Management version 3 Capabilities: [b0] Vendor Specific Information 01:00.0 Class 0300: 10de:0402 (rev a1) (prog-if 00 [VGA]) Subsystem: 1458:3447 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at e2000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=256M] Memory at e0000000 (64-bit, non-prefetchable) [size=32M] I/O ports at 2000 [size=128] Capabilities: [60] Power Management version 2 Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [78] Express Endpoint IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting Capabilities: [600] Unknown (11) 03:00.0 Class 0101: 11ab:6121 (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: 8086:5442 Flags: bus master, fast devsel, latency 0, IRQ 16 I/O ports at 1018 [size=8] I/O ports at 1024 [size=4] I/O ports at 1010 [size=8] I/O ports at 1020 [size=4] I/O ports at 1000 [size=16] Memory at e3100000 (32-bit, non-prefetchable) [size=1K] Capabilities: [48] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable- Capabilities: [e0] Express Legacy Endpoint IRQ 0 Capabilities: [100] Advanced Error Reporting 04:03.0 Class 0c00: 104c:8023 (prog-if 10 [OHCI]) Subsystem: 8086:5442 Flags: bus master, medium devsel, latency 32, IRQ 21 Memory at e3004000 (32-bit, non-prefetchable) [size=2K] Memory at e3000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2

2 1

[alsa-devel] [PATCH] soc - wm9712: Remove unneeded AC97_EXTENDED_MID updates
by Mark Brown 16 Apr '08

16 Apr '08

Signed-off-by: Mark Brown <broonie(a)opensource.wolfsonmicro.com> --- sound/soc/codecs/wm9712.c | 8 -------- 1 files changed, 0 insertions(+), 8 deletions(-) diff --git a/sound/soc/codecs/wm9712.c b/sound/soc/codecs/wm9712.c index 524f745..d2d79e1 100644 --- a/sound/soc/codecs/wm9712.c +++ b/sound/soc/codecs/wm9712.c @@ -581,22 +581,14 @@ static int wm9712_dapm_event(struct snd_soc_codec *codec, int event) switch (event) { case SNDRV_CTL_POWER_D0: /* full On */ - /* liam - maybe enable thermal shutdown */ - reg = ac97_read(codec, AC97_EXTENDED_MID) & 0xdfff; - ac97_write(codec, AC97_EXTENDED_MID, reg); - break; case SNDRV_CTL_POWER_D1: /* partial On */ case SNDRV_CTL_POWER_D2: /* partial On */ break; case SNDRV_CTL_POWER_D3hot: /* Off, with power */ - /* enable master bias and vmid */ - reg = ac97_read(codec, AC97_EXTENDED_MID) & 0xbbff; - ac97_write(codec, AC97_EXTENDED_MID, reg); ac97_write(codec, AC97_POWERDOWN, 0x0000); break; case SNDRV_CTL_POWER_D3cold: /* Off, without power */ /* disable everything including AC link */ - ac97_write(codec, AC97_EXTENDED_MID, 0xffff); ac97_write(codec, AC97_EXTENDED_MSTATUS, 0xffff); ac97_write(codec, AC97_POWERDOWN, 0xffff); break; -- 1.5.5

2 1

[alsa-devel] Releasing IRQs in older kernels
by Risto Suominen 16 Apr '08

16 Apr '08

I'd like to bring up a problem with using alsa-driver on older kernels. I already made a bug report regarding snd-powermac: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3883. It's possible that other drivers suffer from this, too. If I've understood it right, 1.0.16 should be usable on 2.2 kernels and newer. Well, it woudn't compile on 2.6.15-26-powerpc (Ubuntu 6.06.1 Dapper) without some patching. However, the real problem began, when I tried to unload the module. It seems that something has changed (when?) in the kernel's IRQ interface, and ALSA tries to make old code compatible with it by introducing snd_request/free_irq, to be used with older kernels. The idea is to distuingish between IRQs by the last parameter, usually chip's address. This leads to trouble when several IRQs come from the same chip, as is the case with snd-powermac. My conclusion: the drivers suffering from this should be identified, and some alternative way of handling IRQs correctly on different kernel versions should be developed. Risto

2 3

[alsa-devel] [PATCH 002/003] snd-powermac: AWACS and Screamer mixers for PM7500, Beige, and iMac SL
by Risto Suominen 16 Apr '08

16 Apr '08

From: Risto Suominen <Risto.Suominen at gmail.com> Add mixer controls and correct headphone detection bits for PowerMacs 7300/7500 (AWACS) and G3 Beige (Screamer), and iMac G3 Slot-loading (Screamer). Signed-off-by: Risto Suominen <Risto.Suominen at gmail.com> --- Kernel version 2.6.25-rc8 (probably any 2.6) --- sound/ppc/awacs.c.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/awacs.c 2008-04-07 11:24:08.108621048 +0300 @@ -141,7 +141,7 @@ static int snd_pmac_awacs_info_volume(st uinfo->value.integer.max = 15; return 0; } - + static int snd_pmac_awacs_get_volume(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -267,7 +267,8 @@ static int snd_pmac_awacs_put_switch(str static void awacs_set_cuda(int reg, int val) { struct adb_request req; - cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, 0x8a, reg, val); + cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC, 0x8a, + reg, val); while (! req.complete) cuda_poll(); } @@ -289,11 +290,11 @@ static void awacs_amp_set_tone(struct aw /* * vol = 0 - 31 (attenuation), 32 = mute bit, stereo */ -static int awacs_amp_set_vol(struct awacs_amp *amp, int index, int lvol, int rvol, - int do_check) +static int awacs_amp_set_vol(struct awacs_amp *amp, int index, + int lvol, int rvol, int do_check) { if (do_check && amp->amp_vol[index][0] == lvol && - amp->amp_vol[index][1] == rvol) + amp->amp_vol[index][1] == rvol) return 0; awacs_set_cuda(3 + index, lvol); awacs_set_cuda(5 + index, rvol); @@ -337,7 +338,7 @@ static int snd_pmac_awacs_info_volume_am uinfo->value.integer.max = 31; return 0; } - + static int snd_pmac_awacs_get_volume_amp(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -361,8 +362,10 @@ static int snd_pmac_awacs_put_volume_amp snd_assert(amp, return -EINVAL); snd_assert(index >= 0 && index <= 1, return -EINVAL); - vol[0] = (31 - (ucontrol->value.integer.value[0] & 31)) | (amp->amp_vol[index][0] & 32); - vol[1] = (31 - (ucontrol->value.integer.value[1] & 31)) | (amp->amp_vol[index][1] & 32); + vol[0] = (31 - (ucontrol->value.integer.value[0] & 31)) + | (amp->amp_vol[index][0] & 32); + vol[1] = (31 - (ucontrol->value.integer.value[1] & 31)) + | (amp->amp_vol[index][1] & 32); return awacs_amp_set_vol(amp, index, vol[0], vol[1], 1); } @@ -374,8 +377,10 @@ static int snd_pmac_awacs_get_switch_amp struct awacs_amp *amp = chip->mixer_data; snd_assert(amp, return -EINVAL); snd_assert(index >= 0 && index <= 1, return -EINVAL); - ucontrol->value.integer.value[0] = (amp->amp_vol[index][0] & 32) ? 0 : 1; - ucontrol->value.integer.value[1] = (amp->amp_vol[index][1] & 32) ? 0 : 1; + ucontrol->value.integer.value[0] = (amp->amp_vol[index][0] & 32) + ? 0 : 1; + ucontrol->value.integer.value[1] = (amp->amp_vol[index][1] & 32) + ? 0 : 1; return 0; } @@ -389,8 +394,10 @@ static int snd_pmac_awacs_put_switch_amp snd_assert(amp, return -EINVAL); snd_assert(index >= 0 && index <= 1, return -EINVAL); - vol[0] = (ucontrol->value.integer.value[0] ? 0 : 32) | (amp->amp_vol[index][0] & 31); - vol[1] = (ucontrol->value.integer.value[1] ? 0 : 32) | (amp->amp_vol[index][1] & 31); + vol[0] = (ucontrol->value.integer.value[0] ? 0 : 32) + | (amp->amp_vol[index][0] & 31); + vol[1] = (ucontrol->value.integer.value[1] ? 0 : 32) + | (amp->amp_vol[index][1] & 31); return awacs_amp_set_vol(amp, index, vol[0], vol[1], 1); } @@ -403,7 +410,7 @@ static int snd_pmac_awacs_info_tone_amp( uinfo->value.integer.max = 14; return 0; } - + static int snd_pmac_awacs_get_tone_amp(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -445,7 +452,7 @@ static int snd_pmac_awacs_info_master_am uinfo->value.integer.max = 99; return 0; } - + static int snd_pmac_awacs_get_master_amp(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol) { @@ -493,14 +500,14 @@ static struct snd_kcontrol_new snd_pmac_ .private_value = AMP_CH_HD, }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Tone Control - Bass", + .name = "Tone Control - Bass Playback Volume", .info = snd_pmac_awacs_info_tone_amp, .get = snd_pmac_awacs_get_tone_amp, .put = snd_pmac_awacs_put_tone_amp, .private_value = 0, }, { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Tone Control - Treble", + .name = "Tone Control - Treble Playback Volume", .info = snd_pmac_awacs_info_tone_amp, .get = snd_pmac_awacs_get_tone_amp, .put = snd_pmac_awacs_put_tone_amp, @@ -544,7 +551,7 @@ static int snd_pmac_screamer_mic_boost_i uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = 1; uinfo->value.integer.min = 0; - uinfo->value.integer.max = 2; + uinfo->value.integer.max = 3; return 0; } @@ -552,16 +559,14 @@ static int snd_pmac_screamer_mic_boost_g struct snd_ctl_elem_value *ucontrol) { struct snd_pmac *chip = snd_kcontrol_chip(kcontrol); - int val; + int val = 0; unsigned long flags; spin_lock_irqsave(&chip->reg_lock, flags); if (chip->awacs_reg[6] & MASK_MIC_BOOST) - val = 2; - else if (chip->awacs_reg[0] & MASK_GAINLINE) - val = 1; - else - val = 0; + val |= 2; + if (chip->awacs_reg[0] & MASK_GAINLINE) + val |= 1; spin_unlock_irqrestore(&chip->reg_lock, flags); ucontrol->value.integer.value[0] = val; return 0; @@ -578,11 +583,10 @@ static int snd_pmac_screamer_mic_boost_p spin_lock_irqsave(&chip->reg_lock, flags); val0 = chip->awacs_reg[0] & ~MASK_GAINLINE; val6 = chip->awacs_reg[6] & ~MASK_MIC_BOOST; - if (ucontrol->value.integer.value[0] > 0) { + if (ucontrol->value.integer.value[0] & 1) val0 |= MASK_GAINLINE; - if (ucontrol->value.integer.value[0] > 1) - val6 |= MASK_MIC_BOOST; - } + if (ucontrol->value.integer.value[0] & 2) + val6 |= MASK_MIC_BOOST; if (val0 != chip->awacs_reg[0]) { snd_pmac_awacs_write_reg(chip, 0, val0); changed = 1; @@ -599,9 +603,32 @@ static int snd_pmac_screamer_mic_boost_p * lists of mixer elements */ static struct snd_kcontrol_new snd_pmac_awacs_mixers[] __initdata = { - AWACS_VOLUME("Master Playback Volume", 2, 6, 1), AWACS_SWITCH("Master Capture Switch", 1, SHIFT_LOOPTHRU, 0), - AWACS_VOLUME("Capture Volume", 0, 4, 0), + AWACS_VOLUME("Master Capture Volume", 0, 4, 0), +/* AWACS_SWITCH("Unknown Playback Switch", 6, SHIFT_PAROUT0, 0), */ +}; + +static struct snd_kcontrol_new snd_pmac_screamer_mixers_beige[] __initdata = { + AWACS_VOLUME("Master Playback Volume", 2, 6, 1), + AWACS_VOLUME("Play-through Playback Volume", 5, 6, 1), + AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), + AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_LINE, 0), +}; + +static struct snd_kcontrol_new snd_pmac_screamer_mixers_imac[] __initdata = { + AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), + AWACS_VOLUME("Master Playback Volume", 5, 6, 1), + AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), +}; + +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac7500[] __initdata = { + AWACS_VOLUME("Line out Playback Volume", 2, 6, 1), + AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), + AWACS_SWITCH("Line Capture Switch", 0, SHIFT_MUX_MIC, 0), +}; + +static struct snd_kcontrol_new snd_pmac_awacs_mixers_pmac[] __initdata = { + AWACS_VOLUME("Master Playback Volume", 2, 6, 1), AWACS_SWITCH("CD Capture Switch", 0, SHIFT_MUX_CD, 0), }; @@ -621,35 +648,61 @@ static struct snd_kcontrol_new snd_pmac_ static struct snd_kcontrol_new snd_pmac_awacs_master_sw __initdata = AWACS_SWITCH("Master Playback Switch", 1, SHIFT_HDMUTE, 1); +static struct snd_kcontrol_new snd_pmac_awacs_master_sw_imac __initdata = +AWACS_SWITCH("Line out Playback Switch", 1, SHIFT_HDMUTE, 1); + static struct snd_kcontrol_new snd_pmac_awacs_mic_boost[] __initdata = { - AWACS_SWITCH("Mic Boost", 0, SHIFT_GAINLINE, 0), + AWACS_SWITCH("Mic Boost Capture Switch", 0, SHIFT_GAINLINE, 0), }; static struct snd_kcontrol_new snd_pmac_screamer_mic_boost[] __initdata = { { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Mic Boost", + .name = "Mic Boost Capture Volume", .info = snd_pmac_screamer_mic_boost_info, .get = snd_pmac_screamer_mic_boost_get, .put = snd_pmac_screamer_mic_boost_put, }, }; +static struct snd_kcontrol_new snd_pmac_awacs_mic_boost_pmac7500[] __initdata = +{ + AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0), +}; + +static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_beige[] __initdata = +{ + AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0), + AWACS_SWITCH("CD Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0), +}; + +static struct snd_kcontrol_new snd_pmac_screamer_mic_boost_imac[] __initdata = +{ + AWACS_SWITCH("Line Boost Capture Switch", 0, SHIFT_GAINLINE, 0), + AWACS_SWITCH("Mic Boost Capture Switch", 6, SHIFT_MIC_BOOST, 0), +}; + static struct snd_kcontrol_new snd_pmac_awacs_speaker_vol[] __initdata = { AWACS_VOLUME("PC Speaker Playback Volume", 4, 6, 1), }; + static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw __initdata = AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_SPKMUTE, 1); +static struct snd_kcontrol_new snd_pmac_awacs_speaker_sw_imac __initdata = +AWACS_SWITCH("PC Speaker Playback Switch", 1, SHIFT_PAROUT1, 0); + /* * add new mixer elements to the card */ -static int build_mixers(struct snd_pmac *chip, int nums, struct snd_kcontrol_new *mixers) +static int build_mixers(struct snd_pmac *chip, int nums, + struct snd_kcontrol_new *mixers) { int i, err; for (i = 0; i < nums; i++) { - if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&mixers[i], chip))) < 0) + if ((err = snd_ctl_add(chip->card, + snd_ctl_new1(&mixers[i], chip))) < 0) return err; } return 0; @@ -699,8 +752,10 @@ static void snd_pmac_awacs_resume(struct #ifdef PMAC_AMP_AVAIL if (chip->mixer_data) { struct awacs_amp *amp = chip->mixer_data; - awacs_amp_set_vol(amp, 0, amp->amp_vol[0][0], amp->amp_vol[0][1], 0); - awacs_amp_set_vol(amp, 1, amp->amp_vol[1][0], amp->amp_vol[1][1], 0); + awacs_amp_set_vol(amp, 0, + amp->amp_vol[0][0], amp->amp_vol[0][1], 0); + awacs_amp_set_vol(amp, 1, + amp->amp_vol[1][0], amp->amp_vol[1][1], 0); awacs_amp_set_tone(amp, amp->amp_tone[0], amp->amp_tone[1]); awacs_amp_set_master(amp, amp->amp_master); } @@ -708,6 +763,14 @@ static void snd_pmac_awacs_resume(struct } #endif /* CONFIG_PM */ +#define IS_PM7500 (machine_is_compatible("AAPL,7500")) +#define IS_BEIGE (machine_is_compatible("AAPL,Gossamer")) +#define IS_IMAC (machine_is_compatible("PowerMac2,1") \ + || machine_is_compatible("PowerMac2,2") \ + || machine_is_compatible("PowerMac4,1")) + +static int imac; + #ifdef PMAC_SUPPORT_AUTOMUTE /* * auto-mute stuffs @@ -750,9 +813,16 @@ static void snd_pmac_awacs_update_automu } else #endif { - int reg = chip->awacs_reg[1] | (MASK_HDMUTE|MASK_SPKMUTE); + int reg = chip->awacs_reg[1] + | (MASK_HDMUTE | MASK_SPKMUTE); + if (imac) { + reg &= ~MASK_SPKMUTE; + reg &= ~MASK_PAROUT1; + } if (snd_pmac_awacs_detect_headphone(chip)) reg &= ~MASK_HDMUTE; + else if (imac) + reg |= MASK_PAROUT1; else reg &= ~MASK_SPKMUTE; if (do_notify && reg == chip->awacs_reg[1]) @@ -778,8 +848,11 @@ static void snd_pmac_awacs_update_automu int __init snd_pmac_awacs_init(struct snd_pmac *chip) { + int pm7500 = IS_PM7500; + int beige = IS_BEIGE; int err, vol; + imac = IS_IMAC; /* looks like MASK_GAINLINE triggers something, so we set here * as start-up */ @@ -787,7 +860,7 @@ snd_pmac_awacs_init(struct snd_pmac *chi chip->awacs_reg[1] = MASK_CMUTE | MASK_AMUTE; /* FIXME: Only machines with external SRS module need MASK_PAROUT */ if (chip->has_iic || chip->device_id == 0x5 || - /*chip->_device_id == 0x8 || */ + /* chip->_device_id == 0x8 || */ chip->device_id == 0xb) chip->awacs_reg[1] |= MASK_PAROUT; /* get default volume from nvram */ @@ -798,8 +871,10 @@ snd_pmac_awacs_init(struct snd_pmac *chi chip->awacs_reg[2] = vol; chip->awacs_reg[4] = vol; if (chip->model == PMAC_SCREAMER) { - chip->awacs_reg[5] = vol; /* FIXME: screamer has loopthru vol control */ - chip->awacs_reg[6] = MASK_MIC_BOOST; /* FIXME: maybe should be vol << 3 for PCMCIA speaker */ + /* FIXME: screamer has loopthru vol control */ + chip->awacs_reg[5] = vol; + /* FIXME: maybe should be vol << 3 for PCMCIA speaker */ + chip->awacs_reg[6] = MASK_MIC_BOOST; chip->awacs_reg[7] = 0; } @@ -815,7 +890,8 @@ snd_pmac_awacs_init(struct snd_pmac *chi return -ENOMEM; chip->mixer_data = amp; chip->mixer_free = awacs_amp_free; - awacs_amp_set_vol(amp, 0, 63, 63, 0); /* mute and zero vol */ + /* mute and zero vol */ + awacs_amp_set_vol(amp, 0, 63, 63, 0); awacs_amp_set_vol(amp, 1, 63, 63, 0); awacs_amp_set_tone(amp, 7, 7); /* 0 dB */ awacs_amp_set_master(amp, 79); /* 0 dB */ @@ -826,20 +902,25 @@ snd_pmac_awacs_init(struct snd_pmac *chi /* set headphone-jack detection bit */ switch (chip->model) { case PMAC_AWACS: - chip->hp_stat_mask = 0x04; + chip->hp_stat_mask = pm7500 ? MASK_HDPCONN + : MASK_LOCONN; break; case PMAC_SCREAMER: switch (chip->device_id) { case 0x08: - /* 1 = side jack, 2 = front jack */ - chip->hp_stat_mask = 0x03; + case 0x0B: + chip->hp_stat_mask = imac + ? MASK_LOCONN_IMAC | + MASK_HDPLCONN_IMAC | + MASK_HDPRCONN_IMAC + : MASK_HDPCONN; break; case 0x00: case 0x05: - chip->hp_stat_mask = 0x04; + chip->hp_stat_mask = MASK_LOCONN; break; default: - chip->hp_stat_mask = 0x08; + chip->hp_stat_mask = MASK_HDPCONN; break; } break; @@ -857,15 +938,37 @@ snd_pmac_awacs_init(struct snd_pmac *chi if ((err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_mixers), snd_pmac_awacs_mixers)) < 0) return err; - if (chip->model == PMAC_SCREAMER) + if (beige) + ; + else if (chip->model == PMAC_SCREAMER) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mixers2), snd_pmac_screamer_mixers2); - else + else if (!pm7500) err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_mixers2), snd_pmac_awacs_mixers2); if (err < 0) return err; - chip->master_sw_ctl = snd_ctl_new1(&snd_pmac_awacs_master_sw, chip); + if (pm7500) + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_mixers_pmac7500), + snd_pmac_awacs_mixers_pmac7500); + else if (beige) + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mixers_beige), + snd_pmac_screamer_mixers_beige); + else if (imac) + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mixers_imac), + snd_pmac_screamer_mixers_imac); + else + err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_mixers_pmac), + snd_pmac_awacs_mixers_pmac); + if (err < 0) + return err; + chip->master_sw_ctl = snd_ctl_new1((pm7500 || imac) + ? &snd_pmac_awacs_master_sw_imac + : &snd_pmac_awacs_master_sw, chip); if ((err = snd_ctl_add(chip->card, chip->master_sw_ctl)) < 0) return err; #ifdef PMAC_AMP_AVAIL @@ -876,35 +979,58 @@ snd_pmac_awacs_init(struct snd_pmac *chi * screamer registers. * in this case, it seems the route C is not used. */ - if ((err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_amp_vol), + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_amp_vol), snd_pmac_awacs_amp_vol)) < 0) return err; /* overwrite */ - chip->master_sw_ctl = snd_ctl_new1(&snd_pmac_awacs_amp_hp_sw, chip); + chip->master_sw_ctl = snd_ctl_new1(&snd_pmac_awacs_amp_hp_sw, + chip); if ((err = snd_ctl_add(chip->card, chip->master_sw_ctl)) < 0) return err; - chip->speaker_sw_ctl = snd_ctl_new1(&snd_pmac_awacs_amp_spk_sw, chip); + chip->speaker_sw_ctl = snd_ctl_new1(&snd_pmac_awacs_amp_spk_sw, + chip); if ((err = snd_ctl_add(chip->card, chip->speaker_sw_ctl)) < 0) return err; } else #endif /* PMAC_AMP_AVAIL */ { /* route A = headphone, route C = speaker */ - if ((err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_speaker_vol), + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_speaker_vol), snd_pmac_awacs_speaker_vol)) < 0) return err; - chip->speaker_sw_ctl = snd_ctl_new1(&snd_pmac_awacs_speaker_sw, chip); + chip->speaker_sw_ctl = snd_ctl_new1(imac + ? &snd_pmac_awacs_speaker_sw_imac + : &snd_pmac_awacs_speaker_sw, chip); if ((err = snd_ctl_add(chip->card, chip->speaker_sw_ctl)) < 0) return err; } - if (chip->model == PMAC_SCREAMER) { - if ((err = build_mixers(chip, ARRAY_SIZE(snd_pmac_screamer_mic_boost), - snd_pmac_screamer_mic_boost)) < 0) + if (beige) { + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mic_boost_beige), + snd_pmac_screamer_mic_boost_beige)) < 0) + return err; + } else if (imac) { + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mic_boost_imac), + snd_pmac_screamer_mic_boost_imac)) < 0) + return err; + } else if (chip->model == PMAC_SCREAMER) { + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_screamer_mic_boost), + snd_pmac_screamer_mic_boost)) < 0) + return err; + } else if (pm7500) { + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_mic_boost_pmac7500), + snd_pmac_awacs_mic_boost_pmac7500)) < 0) return err; } else { - if ((err = build_mixers(chip, ARRAY_SIZE(snd_pmac_awacs_mic_boost), - snd_pmac_awacs_mic_boost)) < 0) + if ((err = build_mixers(chip, + ARRAY_SIZE(snd_pmac_awacs_mic_boost), + snd_pmac_awacs_mic_boost)) < 0) return err; } --- sound/ppc/awacs.h.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/awacs.h 2008-04-07 11:26:58.198763416 +0300 @@ -116,6 +116,11 @@ struct awacs_regs { #define MASK_HDMUTE MASK_AMUTE #define SHIFT_HDMUTE 9 #define MASK_PAROUT (0x3 << 10) /* Parallel Out (???) */ +#define MASK_PAROUT0 (0x1 << 10) /* Parallel Out (???) */ +#define MASK_PAROUT1 (0x1 << 11) /* Parallel Out (enable speaker) */ +#define SHIFT_PAROUT 10 +#define SHIFT_PAROUT0 10 +#define SHIFT_PAROUT1 11 #define SAMPLERATE_48000 (0x0 << 3) /* 48 or 44.1 kHz */ #define SAMPLERATE_32000 (0x1 << 3) /* 32 or 29.4 kHz */ @@ -152,8 +157,15 @@ struct awacs_regs { #define MASK_REVISION (0xf << 12) /* Revision Number */ #define MASK_MFGID (0xf << 8) /* Mfg. ID */ #define MASK_CODSTATRES (0xf << 4) /* bits 4 - 7 reserved */ -#define MASK_INPPORT (0xf) /* Input Port */ -#define MASK_HDPCONN 8 /* headphone plugged in */ +#define MASK_INSENSE (0xf) /* port sense bits: */ +#define MASK_HDPCONN 8 /* headphone plugged in */ +#define MASK_LOCONN 4 /* line-out plugged in */ +#define MASK_LICONN 2 /* line-in plugged in */ +#define MASK_MICCONN 1 /* microphone plugged in */ +#define MASK_LICONN_IMAC 8 /* line-in plugged in */ +#define MASK_HDPRCONN_IMAC 4 /* headphone right plugged in */ +#define MASK_HDPLCONN_IMAC 2 /* headphone left plugged in */ +#define MASK_LOCONN_IMAC 1 /* line-out plugged in */ /* Clipping Count Reg Bit Masks */ /* -------- ----- --- --- ----- */ @@ -163,7 +175,8 @@ struct awacs_regs { /* DBDMA ChannelStatus Bit Masks */ /* ----- ------------- --- ----- */ #define MASK_CSERR (0x1 << 7) /* Error */ -#define MASK_EOI (0x1 << 6) /* End of Input -- only for Input Channel */ +#define MASK_EOI (0x1 << 6) /* End of Input -- + only for Input Channel */ #define MASK_CSUNUSED (0x1f << 1) /* bits 1-5 not used */ #define MASK_WAIT (0x1) /* Wait */

2 3

[alsa-devel] [PATCH 001b/003] snd-powermac: style pmac.c
by Risto Suominen 16 Apr '08

16 Apr '08

From: Risto Suominen <Risto.Suominen(a)gmail.com> Coding style corrections for pmac.c. Signed-off-by: Risto Suominen <Risto.Suominen(a)gmail.com> --- Kernel version 2.6.25-rc8 (probably any 2.6) --- sound/ppc/pmac.c.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/pmac.c 2008-04-07 12:18:47.503077312 +0300 @@ -214,7 +214,7 @@ static int snd_pmac_pcm_prepare(struct s int rate_index; long offset; struct pmac_stream *astr; - + rec->dma_size = snd_pcm_lib_buffer_bytes(subs); rec->period_size = snd_pcm_lib_period_bytes(subs); rec->nperiods = rec->dma_size / rec->period_size; @@ -643,7 +643,7 @@ static int snd_pmac_pcm_close(struct snd /* reset constraints */ astr->cur_freqs = chip->freqs_ok; astr->cur_formats = chip->formats_ok; - + return 0; }

1 0

[alsa-devel] [PATCH 001a/003] snd-powermac: enable headphone detection
by Risto Suominen 16 Apr '08

16 Apr '08

From: Risto Suominen <Risto.Suominen(a)gmail.com> Enable port change interrupt while initialising AWACS, Screamer, and Burgundy chipsets. Signed-off-by: Risto Suominen <Risto.Suominen(a)gmail.com> --- Kernel version 2.6.25-rc8 (probably any 2.6) --- sound/ppc/pmac.c.orig 2008-04-05 17:45:08.000000000 +0300 +++ sound/ppc/pmac.c 2008-04-07 12:18:47.503077312 +0300 @@ -1300,9 +1304,9 @@ int __init snd_pmac_new(struct snd_card snd_pmac_sound_feature(chip, 1); - /* reset */ - if (chip->model == PMAC_AWACS) - out_le32(&chip->awacs->control, 0x11); + /* reset & enable interrupts */ + if (chip->model <= PMAC_BURGUNDY) + out_le32(&chip->awacs->control, chip->control_mask); /* Powerbooks have odd ways of enabling inputs such as an expansion-bay CD or sound from an internal modem

1 0

[alsa-devel] [Fwd: Another unknown bt878]
by John R. 16 Apr '08

16 Apr '08

This card is sold as the PV-981. I tried various digital_rate settings. -------- Original Message -------- Subject: Another unknown bt878 Date: Mon, 14 Apr 2008 23:17:47 -0500 From: John R. <johnr(a)wowway.com> To: alsa-devel(a)alsa-project.org Sound doesn't work on my bt878 based card. Let me know what other information is needed... kernel 2.6.24.2: Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa00:0x1460 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel(a)alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:00.1[A] -> GSI 18 (level, low) -> IRQ 18 Apr 14 20:28:38 server kernel: bt87x0: Using board 0, analog, digital (rate 32000 Hz) Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa01:0x1461 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel(a)alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:01.1[A] -> GSI 19 (level, low) -> IRQ 19 Apr 14 20:28:38 server kernel: bt87x1: Using board 0, analog, digital (rate 32000 Hz) Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa02:0x1462 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel(a)alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:02.1[A] -> GSI 16 (level, low) -> IRQ 16 Apr 14 20:28:38 server kernel: bt87x2: Using board 0, analog, digital (rate 3200 0 Hz) Apr 14 20:28:38 server kernel: unknown card 0x878-0xaa03:0x1463 Apr 14 20:28:38 server kernel: please mail id, board name, and, if it works, the correct digital_rate option to <alsa-devel(a)alsa-project.org> Apr 14 20:28:38 server kernel: ACPI: PCI Interrupt 0000:05:03.1[A] -> GSI 17 (level, low) -> IRQ 17 Apr 14 20:28:38 server kernel: bt87x3: Using board 0, analog, digital (rate 32000 Hz) lspci: 05:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 05:03.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 05:03.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) at boot: bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 bttv0: Bt878 (rev 17) at 0000:05:00.0, irq: 18, latency: 64, mmio: 0xdfcfe000 bttv0: detected: Provideo PV150A-1 [card=98], PCI subsystem ID is aa00:1460 bttv0: using: ProVideo PV150 [card=98,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv0: tuner absent bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (1). ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 19 (level, low) -> IRQ 19 bttv1: Bt878 (rev 17) at 0000:05:01.0, irq: 19, latency: 64, mmio: 0xdfcfc000 bttv1: detected: Provideo PV150A-2 [card=98], PCI subsystem ID is aa01:1461 bttv1: using: ProVideo PV150 [card=98,autodetected] bttv1: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv1: tuner absent bttv1: registered device video1 bttv1: registered device vbi1 bttv1: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (2). ACPI: PCI Interrupt 0000:05:02.0[A] -> GSI 16 (level, low) -> IRQ 16 bttv2: Bt878 (rev 17) at 0000:05:02.0, irq: 16, latency: 64, mmio: 0xdfcfa000 bttv2: detected: Provideo PV150A-3 [card=98], PCI subsystem ID is aa02:1462 bttv2: using: ProVideo PV150 [card=98,autodetected] bttv2: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv2: tuner absent bttv2: registered device video2 bttv2: registered device vbi2 bttv2: PLL: 28636363 => 35468950 .. ok bttv: Bt8xx card found (3). ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 17 (level, low) -> IRQ 17 bttv3: Bt878 (rev 17) at 0000:05:03.0, irq: 17, latency: 64, mmio: 0xdfcf8000 bttv3: detected: Provideo PV150A-4 [card=98], PCI subsystem ID is aa03:1463 bttv3: using: ProVideo PV150 [card=98,autodetected] bttv3: gpio: en=00000000, out=00000000 in=00ffffff [init] bttv3: tuner absent bttv3: registered device video3 bttv3: registered device vbi3 bttv3: PLL: 28636363 => 35468950 .. ok

1 0

[alsa-devel] snd_ctl_elem_write fails -EPERM if snd_pcm is open
by Bouterse, Bob 15 Apr '08

15 Apr '08

I am trying to sent IEC958 status bits on a VT1708A HAD-INTEL codec while audio is being output. snd_ctl_elem_write returns -EPERM from linux-2.6.24.3/sound/core/control.c:769 . Is there some way I can do this? FYI using iecset will also give you an: # iecset copywrite on snd_ctl_elem_write: Operation not permitted I am using alsa-lib-1.0.14a $uname -a Linux vision-vs 2.6.24.3 #1 SMP Fri Mar 28 09:35:45 EDT 2008 i686 unknown $ gcc -v Target: x86_64-linux-gnu Configured with: ../src/configure -v --enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr --enable-shared --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --enable-nls --with-gxx-include-dir=/usr/include/c++/4.2 --program-suffix=-4.2 --enable-clocale=gnu --enable-libstdcxx-debug --enable-mpfr --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu Thread model: posix gcc version 4.2.3 20071123 (prerelease) (Debian 4.2.2-4) If it helps, here is the code I am using to set the bits. I modeled this after the iecset.c code. Everything opens fine, it is the final call to "snd_ctl_elem_write(this->ctl_handle, cval))" that fails. static int ao_alsa_set_spdif_status(ao_driver_t *this_gen, snd_aes_iec958_t* iec958) { alsa_driver_t *this = (alsa_driver_t *) this_gen; config_values_t *config = this->class->xine->config; char *pcm_device; snd_ctl_card_info_t *hw_info; int err; snd_pcm_info_t *pcm_info; int card; char card_name[20]; snd_ctl_elem_list_t *clist; snd_ctl_elem_id_t *cid; snd_ctl_elem_value_t *cval; unsigned int controls, cidx; const char *spdif_str = SND_CTL_NAME_IEC958("", PLAYBACK, DEFAULT); int opened_audio=0; llprintf(LOG_TRACE_ENTER, "Entered\n"); if(!this->ctl_handle) { if (!this->audio_fd) { pcm_device = config->lookup_entry(config, "audio.device.alsa_passthrough_device")->str_value; llprintf(LOG_MIXER,"Calling local_snd_pcm_open(%s)\n", pcm_device); err=local_snd_pcm_open(&this->audio_fd, pcm_device, SND_PCM_STREAM_PLAYBACK, 1); /* NON-BLOCK mode */ if ( err <0 ) { xine_log (this->class->xine, XINE_LOG_MSG, _("local_snd_pcm_open() failed:%d:%s\n"), err, snd_strerror(err)); return -1; } opened_audio = 1; } snd_pcm_info_alloca(&pcm_info); snd_pcm_info(this->audio_fd, pcm_info); card = snd_pcm_info_get_card(pcm_info); llprintf(LOG_MIXER,"snd_pcm_info_get_card() returned %d\n", card); if(card < 0){ sprintf(card_name, "default"); } else{ sprintf(card_name, "hw:CARD=%i", card); } if (opened_audio && this->audio_fd) { snd_pcm_close(this->audio_fd); this->audio_fd = NULL; opened_audio = 0; } llprintf(LOG_MIXER,"Calling snd_ctl_open(%s)\n", card_name); if ( (err = snd_ctl_open (&this->ctl_handle, card_name, 0)) < 0 ) { xprintf (this->class->xine, XINE_VERBOSITY_DEBUG, "%s: snd_ctl_open(): %s\n", LOG_MODULE, snd_strerror(err)); return -1; } } snd_ctl_card_info_alloca(&hw_info); if ( (err = snd_ctl_card_info (this->ctl_handle, hw_info)) < 0 ) { xprintf (this->class->xine, XINE_VERBOSITY_DEBUG, "%s: snd_ctl_card_info(): %s\n", LOG_MODULE, snd_strerror(err)); snd_ctl_close(this->ctl_handle); this->ctl_handle = 0; return -1; } /* set the spdif status bits */ snd_ctl_elem_list_alloca(&clist); if ((err = snd_ctl_elem_list(this->ctl_handle, clist)) < 0) { xprintf (this->class->xine, XINE_VERBOSITY_DEBUG, "snd_ctl_elem_list(): %s\n", snd_strerror(err)); snd_ctl_close(this->ctl_handle); this->ctl_handle = 0; return -1; } if ((err = snd_ctl_elem_list_alloc_space(clist, snd_ctl_elem_list_get_count(clist))) < 0) { xprintf (this->class->xine, XINE_VERBOSITY_DEBUG, "snd_ctl_elem_list_alloc_space(): %s\n", snd_strerror(err)); snd_ctl_close(this->ctl_handle); return -1; } if ((err = snd_ctl_elem_list(this->ctl_handle, clist)) < 0) { xprintf (this->class->xine, XINE_VERBOSITY_DEBUG, "snd_ctl_elem_list(): %s\n", snd_strerror(err)); snd_ctl_close(this->ctl_handle); this->ctl_handle = 0; return -1; } controls = snd_ctl_elem_list_get_used(clist); for (cidx = 0; cidx < controls; cidx++) { if (!strcmp(snd_ctl_elem_list_get_name(clist, cidx), spdif_str)) break; } if (cidx >= controls) { fprintf(stderr, "control \"%s\" not found\n", spdif_str); snd_ctl_close(this->ctl_handle); this->ctl_handle = 0; return -1; } snd_ctl_elem_id_alloca(&cid); snd_ctl_elem_list_get_id(clist, cidx, cid); snd_ctl_elem_value_alloca(&cval); snd_ctl_elem_value_set_id(cval, cid); llprintf(LOG_MIXER,"Writing AES0=0x%02x,AES1=0x%02x,AES2=0x%02x,AES3=0x%02x\n", iec958->status[0], iec958->status[1], iec958->status[2], iec958->status[3]); /* store the values */ snd_ctl_elem_value_set_iec958(cval, iec958); if ((err = snd_ctl_elem_write(this->ctl_handle, cval)) < 0) { xprintf (this->class->xine, XINE_VERBOSITY_DEBUG, "snd_ctl_elem_write(): %s\n", snd_strerror(err)); snd_ctl_close(this->ctl_handle); this->ctl_handle = 0; } llprintf(LOG_MIXER,"snd_ctl_elem_write() returrned %d\n",err); /*-------------------------------------------------------*/ /*snd_ctl_close (this->ctl_handle);*/ return 0; } ---------------------------------------------------- Bob Bouterse Sr. Software Engineer D&M Holdings Inc.

2 1