October 2008 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [PATCH] hda: comment typo fix
by Wu Fengguang 07 Oct '08

07 Oct '08

fix a typo in comment for process_unsol_events(). Signed-off-by: Wu Fengguang<wfg(a)linux.intel.com> --- diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c742e10..7717a92 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -314,7 +314,7 @@ int snd_hda_queue_unsol_event(struct hda_bus *bus, u32 res, u32 res_ex) } /* - * process queueud unsolicited events + * process queued unsolicited events */ static void process_unsol_events(struct work_struct *work) {

2 2

[alsa-devel] [PATCH] hda: comment typo fix
by Wu Fengguang 07 Oct '08

07 Oct '08

fix a typo in comment for is_in_nid_list(). Signed-off-by: Wu Fengguang <wfg(a)linux.intel.com> --- diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index c742e10..6268667 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2807,7 +2807,7 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, } /* - * Helper for automatic ping configuration + * Helper for automatic pin configuration */ static int is_in_nid_list(hda_nid_t nid, hda_nid_t *list)

1 0

[alsa-devel] [PATCH 1/1] ALSA: ASoC: add new param mux to dapm_mux_update_power
by Richard Zhao 07 Oct '08

07 Oct '08

Function dapm_mux_update_power needs enum index mux and register mask value val as parameters, but it only has a parameter val, and uses it as both val and mux. snd_soc_test_bits(widget->codec, e->reg, mask, val) val is register mask here, e->texts[val] but val should be enum index mux here. This patch adds a new param mux to fix it. Signed-off-by: Richard Zhao <linuxzsc(a)gmail.com> diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index c016426..9ca9c08 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -693,7 +693,7 @@ static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action) /* test and update the power status of a mux widget */ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget, struct snd_kcontrol *kcontrol, int mask, - int val, struct soc_enum* e) + int mux, int val, struct soc_enum *e) { struct snd_soc_dapm_path *path; int found = 0; @@ -709,12 +709,12 @@ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget, if (path->kcontrol != kcontrol) continue; - if (!path->name || ! e->texts[val]) + if (!path->name || !e->texts[mux]) continue; found = 1; /* we now need to match the string in the enum to the path */ - if (!(strcmp(path->name, e->texts[val]))) + if (!(strcmp(path->name, e->texts[mux]))) path->connect = 1; /* new connection */ else path->connect = 0; /* old connection must be powered down */ @@ -1291,7 +1291,7 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, mutex_lock(&widget->codec->mutex); widget->value = val; - dapm_mux_update_power(widget, kcontrol, mask, mux, e); + dapm_mux_update_power(widget, kcontrol, mask, mux, val, e); if (widget->event) { if (widget->event_flags & SND_SOC_DAPM_PRE_REG) { ret = widget->event(widget, -- 1.5.4.3

1 0

[alsa-devel] [PATCH 1/1] ALSA: ASoC: Fix wrong param when call snd_soc_test_bits
by Richard Zhao 06 Oct '08

06 Oct '08

Fix wrong param when call snd_soc_test_bits in function dapm_mux_update_power. Signed-off-by: Richard Zhao <linuxzsc(a)gmail.com> diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index c016426..9ca9c08 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -693,7 +693,7 @@ static void dbg_dump_dapm(struct snd_soc_codec* codec, const char *action) /* test and update the power status of a mux widget */ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget, struct snd_kcontrol *kcontrol, int mask, - int val, struct soc_enum* e) + int mux, int val, struct soc_enum *e) { struct snd_soc_dapm_path *path; int found = 0; @@ -709,12 +709,12 @@ static int dapm_mux_update_power(struct snd_soc_dapm_widget *widget, if (path->kcontrol != kcontrol) continue; - if (!path->name || ! e->texts[val]) + if (!path->name || !e->texts[mux]) continue; found = 1; /* we now need to match the string in the enum to the path */ - if (!(strcmp(path->name, e->texts[val]))) + if (!(strcmp(path->name, e->texts[mux]))) path->connect = 1; /* new connection */ else path->connect = 0; /* old connection must be powered down */ @@ -1291,7 +1291,7 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, mutex_lock(&widget->codec->mutex); widget->value = val; - dapm_mux_update_power(widget, kcontrol, mask, mux, e); + dapm_mux_update_power(widget, kcontrol, mask, mux, val, e); if (widget->event) { if (widget->event_flags & SND_SOC_DAPM_PRE_REG) { ret = widget->event(widget, -- 1.5.4.3

3 4

Re: [alsa-devel] [Alsa-user] [SOLVED] Re: snd_hda_intel on ALC662 (Classmate 2nd gen) does not mute and does not offer mic boost
by Vedran Miletić 06 Oct '08

06 Oct '08

http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=commit;h=ac… See diff of that commit for some hints. Or don't. I got it wrong. :-( Basically, you need to find out subsystem ID for your soundcard. "lspci -vnn" will be your friend here. You should find out something like this for your soundcard: 00:07.0 Audio device [0403]: nVidia Corporation Device [10de:0774] (rev a1) Subsystem: ASRock Incorporation Device [1849:3662] <------ THIS IS THE IMPORTANT ROW Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 Memory at f9e78000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel So I should have put 0x1849, 0x3662 for my souncard instead of 0x1849, 0x0774. I probably wouldn't notice, but now I will patch it. Thanks for asking! 2008/10/4 Pedro Pessoa <pessoa(a)angulosolido.pt>: > On Saturday 04 October 2008 17:54, Vedran Miletić wrote: >> Can you create a patch to add this device to quirks list? > > Sure! Let me know what I have to do. > > The quirks list is something that will make 'auto' load ECS? > > -- > Angulo Sólido - Tecnologias de Informação > http://angulosolido.pt > -- Vedran Miletić

2 1

[alsa-devel] [PATCH] ALSA: snd-usb-audio: support for Edirol UA-4FX device
by pedro.lopez.cabanillas＠gmail.com 06 Oct '08

06 Oct '08

From: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas(a)gmail.com> Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas(a)gmail.com> diff --git a/sound/usb/usbaudio.c b/sound/usb/usbaudio.c index c5cf682..05c7849 100644 --- a/sound/usb/usbaudio.c +++ b/sound/usb/usbaudio.c @@ -2996,12 +2996,12 @@ static int create_standard_audio_quirk(struct snd_usb_audio *chip, } /* - * Create a stream for an Edirol UA-700/UA-25 interface. The only way - * to detect the sample rate is by looking at wMaxPacketSize. + * Create a stream for an Edirol UA-700/UA-25/UA-4FX interface. + * The only way to detect the sample rate is by looking at wMaxPacketSize. */ -static int create_ua700_ua25_quirk(struct snd_usb_audio *chip, - struct usb_interface *iface, - const struct snd_usb_audio_quirk *quirk) +static int create_uaxx_quirk(struct snd_usb_audio *chip, + struct usb_interface *iface, + const struct snd_usb_audio_quirk *quirk) { static const struct audioformat ua_format = { .format = SNDRV_PCM_FORMAT_S24_3LE, @@ -3016,37 +3016,12 @@ static int create_ua700_ua25_quirk(struct snd_usb_audio *chip, struct audioformat *fp; int stream, err; - /* both PCM and MIDI interfaces have 2 altsettings */ - if (iface->num_altsetting != 2) + /* both PCM and MIDI interfaces have 2 or more altsettings */ + if (iface->num_altsetting < 2) return -ENXIO; alts = &iface->altsetting[1]; altsd = get_iface_desc(alts); - if (altsd->bNumEndpoints == 2) { - static const struct snd_usb_midi_endpoint_info ua700_ep = { - .out_cables = 0x0003, - .in_cables = 0x0003 - }; - static const struct snd_usb_audio_quirk ua700_quirk = { - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = &ua700_ep - }; - static const struct snd_usb_midi_endpoint_info ua25_ep = { - .out_cables = 0x0001, - .in_cables = 0x0001 - }; - static const struct snd_usb_audio_quirk ua25_quirk = { - .type = QUIRK_MIDI_FIXED_ENDPOINT, - .data = &ua25_ep - }; - if (chip->usb_id == USB_ID(0x0582, 0x002b)) - return snd_usb_create_midi_interface(chip, iface, - &ua700_quirk); - else - return snd_usb_create_midi_interface(chip, iface, - &ua25_quirk); - } - if (altsd->bNumEndpoints != 1) return -ENXIO; @@ -3376,9 +3351,9 @@ static int snd_usb_create_quirk(struct snd_usb_audio *chip, [QUIRK_MIDI_CME] = snd_usb_create_midi_interface, [QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk, [QUIRK_AUDIO_FIXED_ENDPOINT] = create_fixed_stream_quirk, - [QUIRK_AUDIO_EDIROL_UA700_UA25] = create_ua700_ua25_quirk, [QUIRK_AUDIO_EDIROL_UA1000] = create_ua1000_quirk, [QUIRK_AUDIO_EDIROL_UA101] = create_ua101_quirk, + [QUIRK_AUDIO_EDIROL_UAXX] = create_uaxx_quirk }; if (quirk->type < QUIRK_TYPE_COUNT) { diff --git a/sound/usb/usbaudio.h b/sound/usb/usbaudio.h index f3ca77f..36e4f7a 100644 --- a/sound/usb/usbaudio.h +++ b/sound/usb/usbaudio.h @@ -159,9 +159,9 @@ enum quirk_type { QUIRK_MIDI_US122L, QUIRK_AUDIO_STANDARD_INTERFACE, QUIRK_AUDIO_FIXED_ENDPOINT, - QUIRK_AUDIO_EDIROL_UA700_UA25, QUIRK_AUDIO_EDIROL_UA1000, QUIRK_AUDIO_EDIROL_UA101, + QUIRK_AUDIO_EDIROL_UAXX, QUIRK_TYPE_COUNT }; diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 3f68359..ad7a318 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -855,15 +855,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 1, - .type = QUIRK_AUDIO_EDIROL_UA700_UA25 + .type = QUIRK_AUDIO_EDIROL_UAXX }, { .ifnum = 2, - .type = QUIRK_AUDIO_EDIROL_UA700_UA25 + .type = QUIRK_AUDIO_EDIROL_UAXX }, { .ifnum = 3, - .type = QUIRK_AUDIO_EDIROL_UA700_UA25 + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0003, + .in_cables = 0x0003 + } }, { .ifnum = -1 @@ -1197,15 +1201,19 @@ YAMAHA_DEVICE(0x7010, "UB99"), .data = (const struct snd_usb_audio_quirk[]) { { .ifnum = 0, - .type = QUIRK_AUDIO_EDIROL_UA700_UA25 + .type = QUIRK_AUDIO_EDIROL_UAXX }, { .ifnum = 1, - .type = QUIRK_AUDIO_EDIROL_UA700_UA25 + .type = QUIRK_AUDIO_EDIROL_UAXX }, { .ifnum = 2, - .type = QUIRK_AUDIO_EDIROL_UA700_UA25 + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } }, { .ifnum = -1 @@ -1338,6 +1346,40 @@ YAMAHA_DEVICE(0x7010, "UB99"), } } }, +{ + /* + * This quirk is for the "Advanced Driver" mode. If off, the UA-4FX + * is standard compliant, but has only 16-bit PCM and no MIDI. + */ + USB_DEVICE(0x0582, 0x00a3), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "EDIROL", + .product_name = "UA-4FX", + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_EDIROL_UAXX + }, + { + .ifnum = 1, + .type = QUIRK_AUDIO_EDIROL_UAXX + }, + { + .ifnum = 2, + .type = QUIRK_MIDI_FIXED_ENDPOINT, + .data = & (const struct snd_usb_midi_endpoint_info) { + .out_cables = 0x0001, + .in_cables = 0x0001 + } + }, + { + .ifnum = -1 + } + } + } +}, /* TODO: add Edirol MD-P1 support */ { USB_DEVICE(0x582, 0x00a6), -- 1.5.2.4

4 3

Re: [alsa-devel] ICH9 Sound
by Ronald Horn 06 Oct '08

06 Oct '08

Hello, all mixer levels are ok. I have several times checked all settings. I deinstalled and reinstalled the drivers in yast2, too. The phenomenon is that then a sound is playing, once an incredible noice is playing over the original sound. And this sound is stopping first about ten seconds after I closed the player. It's like an feedback loop. Greetings Ronald > ICH9 sound should be supported. And, as you see, your card is > detected. Perhaps the codec or that specific notebook isn't supported. > Are you sure mixer levels are adjusted properly? > > I'm using a HP Pavilion dv7-1045eg. The Problem is I have no sound, > > because there is no driver witch works. > > Here are some reports from my system: > > / > > lspci -nv/ > > 00:1b.0 0403: 8086:293e (rev 03) > > Subsystem: 103c:30f4 > > Flags: bus master, fast devsel, latency 0, IRQ 22 > > Memory at df300000 (64-bit, non-prefetchable) [size=16K] > > Capabilities: [50] Power Management version 2 > > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > > Queue=0/0 Enable+ > > Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 > > Capabilities: [100] Virtual Channel <?> > > Capabilities: [130] Root Complex Link <?> > > Kernel driver in use: HDA Intel > > Kernel modules: snd-hda-intel > > > > / > > cat /proc/asound/cards/ > > 0 [Intel ]: HDA-Intel - HDA Intel > > HDA Intel at 0xdf300000 irq 22 > > > > > > /head -n 1 /proc/asound/card0/codec*/ > > ==> /proc/asound/card0/codec#0 <== > > Codec: IDT 92HD71B7X > > ==> /proc/asound/card0/codec#2 <== > > Codec: Generic 10de ID 6 > > > > > > I'm using openSuse 11.0 with Kernel 2.6.25.16-0.1-pae. > > Maybe your project could develop some drivers.

1 0

[alsa-devel] [PATCH]ASoC: Create a common directory for AVR32 and ARM9 atmel boards.
by Sedji Gaouaou 06 Oct '08

06 Oct '08

Create a common directory for AVR32 and ARM9 atmel boards to unify atmel audio DAI. Signed-off-by: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> --- sound/soc/Kconfig | 3 +- sound/soc/Makefile | 2 +- sound/soc/atmel/Kconfig | 43 ++ sound/soc/atmel/Makefile | 15 + sound/soc/atmel/atmel-pcm.c | 484 +++++++++++++++++++++++ sound/soc/atmel/atmel-pcm.h | 86 ++++ sound/soc/atmel/atmel_ssc_dai.c | 803 ++++++++++++++++++++++++++++++++++++++ sound/soc/atmel/atmel_ssc_dai.h | 121 ++++++ sound/soc/atmel/playpaq_wm8510.c | 523 +++++++++++++++++++++++++ sound/soc/atmel/sam9g20_wm8731.c | 329 ++++++++++++++++ 10 files changed, 2406 insertions(+), 3 deletions(-) create mode 100644 sound/soc/atmel/Kconfig create mode 100644 sound/soc/atmel/Makefile create mode 100644 sound/soc/atmel/atmel-pcm.c create mode 100644 sound/soc/atmel/atmel-pcm.h create mode 100644 sound/soc/atmel/atmel_ssc_dai.c create mode 100644 sound/soc/atmel/atmel_ssc_dai.h create mode 100644 sound/soc/atmel/playpaq_wm8510.c create mode 100644 sound/soc/atmel/sam9g20_wm8731.c diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 4dfda66..615ebf0 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -23,8 +23,7 @@ config SND_SOC_AC97_BUS bool # All the supported Soc's -source "sound/soc/at32/Kconfig" -source "sound/soc/at91/Kconfig" +source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index d849349..4d475c3 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,5 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/ obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/ diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 0000000..170d9da --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,43 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the AT91 SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 0000000..f54a7cc --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,15 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c new file mode 100644 index 0000000..6d317d2 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.c @@ -0,0 +1,484 @@ +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/dma-mapping.h> +#include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" + + +/*--------------------------------------------------------------------------*\ + * Hardware definition +\*--------------------------------------------------------------------------*/ +/* TODO: These values were taken from the AT91 platform driver, check + * them against real values for AT32 + */ +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, +}; + + +/*--------------------------------------------------------------------------*\ + * Data types +\*--------------------------------------------------------------------------*/ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ + size_t period_size; + + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ + + /* PDC register save */ + u32 pdc_xpr_save; + u32 pdc_xcr_save; + u32 pdc_xnpr_save; + u32 pdc_xncr_save; +}; + + +/*--------------------------------------------------------------------------*\ + * Helper functions +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) +{ + struct snd_pcm_substream *substream = pcm->streams[stream].substream; + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) + return -ENOMEM; + + buf->bytes = size; + return 0; +} +/*--------------------------------------------------------------------------*\ + * ISR +\*--------------------------------------------------------------------------*/ +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + static int count = 0; + + count++; + + if (ssc_sr & params->mask->ssc_endbuf) { + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); + + /* re-start the PDC */ + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + } + + if (ssc_sr & params->mask->ssc_endx) { + /* Load the PDC next pointer and counter registers */ + prtd->period_ptr += prtd->period_size; + if (prtd->period_ptr >= prtd->dma_buffer_end) + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + } + + snd_pcm_period_elapsed(substream); +} + + +/*--------------------------------------------------------------------------*\ + * PCM operations +\*--------------------------------------------------------------------------*/ +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct snd_soc_pcm_runtime *rtd = substream->private_data; + + /* this may get called several times by oss emulation + * with different params */ + + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); + runtime->dma_bytes = params_buffer_bytes(params); + + prtd->params = rtd->dai->cpu_dai->dma_data; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; + + prtd->dma_buffer = runtime->dma_addr; + prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; + prtd->period_size = params_period_bytes(params); + + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); + return 0; +} + +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + if (params != NULL) { + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_disable); + prtd->params->dma_intr_handler = NULL; + } + + return 0; +} + +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + + ssc_writex(params->ssc->regs, SSC_IDR, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + return 0; +} + +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct snd_pcm_runtime *rtd = substream->runtime; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + int ret = 0; + + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + prtd->period_ptr = prtd->dma_buffer; + + ssc_writex(params->ssc->regs, params->pdc->xpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xcr, + prtd->period_size / params->pdc_xfer_size); + + prtd->period_ptr += prtd->period_size; + ssc_writex(params->ssc->regs, params->pdc->xnpr, + prtd->period_ptr); + ssc_writex(params->ssc->regs, params->pdc->xncr, + prtd->period_size / params->pdc_xfer_size); + + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); + + ssc_writex(params->ssc->regs, SSC_IER, + params->mask->ssc_endx | params->mask->ssc_endbuf); + ssc_writex(params->ssc->regs, SSC_PDC_PTCR, + params->mask->pdc_enable); + + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); + break; /* SNDRV_PCM_TRIGGER_START */ + + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_disable); + break; + + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, + params->mask->pdc_enable); + break; + + default: + ret = -EINVAL; + } + + return ret; +} + +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; + dma_addr_t ptr; + snd_pcm_uframes_t x; + + ptr = (dma_addr_t) ssc_readx(params->ssc->regs, params->pdc->xpr); + x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); + + if (x == runtime->buffer_size) + x = 0; + + return x; +} + +static int atmel_pcm_open(struct snd_pcm_substream *substream) +{ + struct snd_pcm_runtime *runtime = substream->runtime; + struct atmel_runtime_data *prtd; + int ret = 0; + + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); + + /* ensure that buffer size is a multiple of period size */ + ret = snd_pcm_hw_constraint_integer(runtime, + SNDRV_PCM_HW_PARAM_PERIODS); + if (ret < 0) + goto out; + + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); + if (prtd == NULL) { + ret = -ENOMEM; + goto out; + } + runtime->private_data = prtd; + + out: + return ret; +} + +static int atmel_pcm_close(struct snd_pcm_substream *substream) +{ + struct atmel_runtime_data *prtd = substream->runtime->private_data; + + kfree(prtd); + return 0; +} + +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) +{ + return remap_pfn_range(vma, vma->vm_start, + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); +} + +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, +}; + + +/*--------------------------------------------------------------------------*\ + * ASoC platform driver +\*--------------------------------------------------------------------------*/ +static u64 atmel_pcm_dmamask = 0xffffffff; + +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) +{ + int ret = 0; + + if (!card->dev->dma_mask) + card->dev->dma_mask = &atmel_pcm_dmamask; + if (!card->dev->coherent_dma_mask) + card->dev->coherent_dma_mask = 0xffffffff; + + if (dai->playback.channels_min) { + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); + if (ret) + goto out; + } + + if (dai->capture.channels_min) { + pr_debug("at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); + if (ret) + goto out; + } + out: + return ret; +} + +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) +{ + struct snd_pcm_substream *substream; + struct snd_dma_buffer *buf; + int stream; + + for (stream = 0; stream < 2; stream++) { + substream = pcm->streams[stream].substream; + if (!substream) + continue; + + buf = &substream->dma_buffer; + if (!buf->area) + continue; + dma_free_coherent(pcm->card->dev, buf->bytes, + buf->area, buf->addr); + buf->area = NULL; + } +} + +#ifdef CONFIG_PM +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* disable the PDC and save the PDC registers */ + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); + + prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); + prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); + prtd->pdc_xnpr_save = ssc_readx(params->ssc->regs, params->pdc->xnpr); + prtd->pdc_xncr_save = ssc_readx(params->ssc->regs, params->pdc->xncr); + + return 0; +} + +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct snd_pcm_runtime *runtime = dai->runtime; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; + + if (!runtime) + return 0; + + prtd = runtime->private_data; + params = prtd->params; + + /* restore the PDC registers and enable the PDC */ + ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); + ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); + ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); + return 0; +} +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, +}; +EXPORT_SYMBOL_GPL(atmel_soc_platform); + +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("Atmel PCM module"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 0000000..ec9b282 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 0000000..2ed1575 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,803 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + if (ssc_p->initialized) { + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} +#if 0 +/* + * Record the SSC system clock rate. + */ +static int atmel_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + /* + * The only clock supplied to the SSC is the AT91 master clock, + * which is only used if the SSC is generating BCLK and/or + * LRC clocks. + */ + switch (clk_id) { + case ATMEL_SYSCLK_MCK: + atmel_ssc_sysclk = freq; + break; + default: + return -EINVAL; + } + + return 0; +} +#endif +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou(a)atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 0000000..a828746 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,121 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino(a)endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood(a)wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */ diff --git a/sound/soc/atmel/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c new file mode 100644 index 0000000..7e6560b --- /dev/null +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -0,0 +1,523 @@ +/* sound/soc/at32/playpaq_wm8510.c + * ASoC machine driver for PlayPaq using WM8510 codec + * + * Copyright (C) 2008 Long Range Systems + * Geoffrey Wossum <gwossum(a)acm.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code is largely inspired by sound/soc/at91/eti_b1_wm8731.c + * + * NOTE: If you don't have the AT32 enhanced portmux configured (which + * isn't currently in the mainline or Atmel patched kernel), you will + * need to set the MCLK pin (PA30) to peripheral A in your board initialization + * code. Something like: + * at32_select_periph(GPIO_PIN_PA(30), GPIO_PERIPH_A, 0); + * + */ + +/* #define DEBUG */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/at32ap700x.h> +#include <mach/portmux.h> + +#include "../codecs/wm8510.h" +#include "at32-pcm.h" +#include "at32-ssc.h" + + +/*-------------------------------------------------------------------------*\ + * constants +\*-------------------------------------------------------------------------*/ +#define MCLK_PIN GPIO_PIN_PA(30) +#define MCLK_PERIPH GPIO_PERIPH_A + + +/*-------------------------------------------------------------------------*\ + * data types +\*-------------------------------------------------------------------------*/ +/* SSC clocking data */ +struct ssc_clock_data { + /* CMR div */ + unsigned int cmr_div; + + /* Frame period (as needed by xCMR.PERIOD) */ + unsigned int period; + + /* The SSC clock rate these settings where calculated for */ + unsigned long ssc_rate; +}; + + +/*-------------------------------------------------------------------------*\ + * module data +\*-------------------------------------------------------------------------*/ +static struct clk *_gclk0; +static struct clk *_pll0; + +#define CODEC_CLK (_gclk0) + + +/*-------------------------------------------------------------------------*\ + * Sound SOC operations +\*-------------------------------------------------------------------------*/ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE +static struct ssc_clock_data playpaq_wm8510_calc_ssc_clock( + struct snd_pcm_hw_params *params, + struct snd_soc_dai *cpu_dai) +{ + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + struct ssc_clock_data cd; + unsigned int rate, width_bits, channels; + unsigned int bitrate, ssc_div; + unsigned actual_rate; + + + /* + * Figure out required bitrate + */ + rate = params_rate(params); + channels = params_channels(params); + width_bits = snd_pcm_format_physical_width(params_format(params)); + bitrate = rate * width_bits * channels; + + + /* + * Figure out required SSC divider and period for required bitrate + */ + cd.ssc_rate = clk_get_rate(ssc->clk); + ssc_div = cd.ssc_rate / bitrate; + cd.cmr_div = ssc_div / 2; + if (ssc_div & 1) { + /* round cmr_div up */ + cd.cmr_div++; + } + cd.period = width_bits - 1; + + + /* + * Find actual rate, compare to requested rate + */ + actual_rate = (cd.ssc_rate / (cd.cmr_div * 2)) / (2 * (cd.period + 1)); + pr_debug("playpaq_wm8510: Request rate = %d, actual rate = %d\n", + rate, actual_rate); + + + return cd; +} +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + +static int playpaq_wm8510_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct at32_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + unsigned int pll_out = 0, bclk = 0, mclk_div = 0; + int ret; + + + /* Due to difficulties with getting the correct clocks from the AT32's + * PLL0, we're going to let the CODEC be in charge of all the clocks + */ +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); +#else + struct ssc_clock_data cd; + const unsigned int fmt = (SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); +#endif + + if (ssc == NULL) { + pr_warning("playpaq_wm8510_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + + /* + * Figure out PLL and BCLK dividers for WM8510 + */ + switch (params_rate(params)) { + case 48000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 44100: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_1; + bclk = WM8510_BCLKDIV_8; + break; + + case 22050: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_2; + bclk = WM8510_BCLKDIV_8; + break; + + case 16000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_3; + bclk = WM8510_BCLKDIV_8; + break; + + case 11025: + pll_out = 11289600; + mclk_div = WM8510_MCLKDIV_4; + bclk = WM8510_BCLKDIV_8; + break; + + case 8000: + pll_out = 12288000; + mclk_div = WM8510_MCLKDIV_6; + bclk = WM8510_BCLKDIV_8; + break; + + default: + pr_warning("playpaq_wm8510: Unsupported sample rate %d\n", + params_rate(params)); + return -EINVAL; + } + + + /* + * set CPU and CODEC DAI configuration + */ + ret = snd_soc_dai_set_fmt(codec_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CODEC DAI format (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_fmt(cpu_dai, fmt); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU DAI format (%d)\n", + ret); + return ret; + } + + + /* + * Set CPU clock configuration + */ +#if defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + cd = playpaq_wm8510_calc_ssc_clock(params, cpu_dai); + pr_debug("playpaq_wm8510: cmr_div = %d, period = %d\n", + cd.cmr_div, cd.period); + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_CMR_DIV, cd.cmr_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CPU CMR_DIV (%d)\n", + ret); + return ret; + } + ret = snd_soc_dai_set_clkdiv(cpu_dai, AT32_SSC_TCMR_PERIOD, + cd.period); + if (ret < 0) { + pr_warning("playpaq_wm8510: " + "Failed to set CPU transmit period (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + /* + * Set CODEC clock configuration + */ + pr_debug("playpaq_wm8510: " + "pll_in = %ld, pll_out = %u, bclk = %x, mclk = %x\n", + clk_get_rate(CODEC_CLK), pll_out, bclk, mclk_div); + + +#if !defined CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_BCLKDIV, bclk); + if (ret < 0) { + pr_warning + ("playpaq_wm8510: Failed to set CODEC DAI BCLKDIV (%d)\n", + ret); + return ret; + } +#endif /* CONFIG_SND_AT32_SOC_PLAYPAQ_SLAVE */ + + + ret = snd_soc_dai_set_pll(codec_dai, 0, + clk_get_rate(CODEC_CLK), pll_out); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC DAI PLL (%d)\n", + ret); + return ret; + } + + + ret = snd_soc_dai_set_clkdiv(codec_dai, WM8510_MCLKDIV, mclk_div); + if (ret < 0) { + pr_warning("playpaq_wm8510: Failed to set CODEC MCLKDIV (%d)\n", + ret); + return ret; + } + + + return 0; +} + + + +static struct snd_soc_ops playpaq_wm8510_ops = { + .hw_params = playpaq_wm8510_hw_params, +}; + + + +static const struct snd_soc_dapm_widget playpaq_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + + + +static const char *intercon[][3] = { + /* speaker connected to SPKOUT */ + {"Ext Spk", NULL, "SPKOUTP"}, + {"Ext Spk", NULL, "SPKOUTN"}, + + {"Mic Bias", NULL, "Int Mic"}, + {"MICN", NULL, "Mic Bias"}, + {"MICP", NULL, "Mic Bias"}, + + /* Terminator */ + {NULL, NULL, NULL}, +}; + + + +static int playpaq_wm8510_init(struct snd_soc_codec *codec) +{ + int i; + + /* + * Add DAPM widgets + */ + for (i = 0; i < ARRAY_SIZE(playpaq_dapm_widgets); i++) + snd_soc_dapm_new_control(codec, &playpaq_dapm_widgets[i]); + + + + /* + * Setup audio path interconnects + */ + for (i = 0; intercon[i][0] != NULL; i++) { + snd_soc_dapm_connect_input(codec, + intercon[i][0], + intercon[i][1], intercon[i][2]); + } + + + /* always connected pins */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + snd_soc_dapm_sync(codec); + + + + /* Make CSB show PLL rate */ + snd_soc_dai_set_clkdiv(codec->dai, WM8510_OPCLKDIV, + WM8510_OPCLKDIV_1 | 4); + + return 0; +} + + + +static struct snd_soc_dai_link playpaq_wm8510_dai = { + .name = "WM8510", + .stream_name = "WM8510 PCM", + .cpu_dai = &at32_ssc_dai[0], + .codec_dai = &wm8510_dai, + .init = playpaq_wm8510_init, + .ops = &playpaq_wm8510_ops, +}; + + + +static struct snd_soc_machine snd_soc_machine_playpaq = { + .name = "LRS_PlayPaq_WM8510", + .dai_link = &playpaq_wm8510_dai, + .num_links = 1, +}; + + + +static struct wm8510_setup_data playpaq_wm8510_setup = { + .i2c_bus = 0, + .i2c_address = 0x1a, +}; + + + +static struct snd_soc_device playpaq_wm8510_snd_devdata = { + .machine = &snd_soc_machine_playpaq, + .platform = &at32_soc_platform, + .codec_dev = &soc_codec_dev_wm8510, + .codec_data = &playpaq_wm8510_setup, +}; + +static struct platform_device *playpaq_snd_device; + + +static int __init playpaq_asoc_init(void) +{ + int ret = 0; + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + + /* + * Configure MCLK for WM8510 + */ + _gclk0 = clk_get(NULL, "gclk0"); + if (IS_ERR(_gclk0)) { + _gclk0 = NULL; + goto err_gclk0; + } + _pll0 = clk_get(NULL, "pll0"); + if (IS_ERR(_pll0)) { + _pll0 = NULL; + goto err_pll0; + } + if (clk_set_parent(_gclk0, _pll0)) { + pr_warning("snd-soc-playpaq: " + "Failed to set PLL0 as parent for DAC clock\n"); + goto err_set_clk; + } + clk_set_rate(CODEC_CLK, 12000000); + clk_enable(CODEC_CLK); + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_select_periph(MCLK_PIN, MCLK_PERIPH, 0); +#endif + + + /* + * Create and register platform device + */ + playpaq_snd_device = platform_device_alloc("soc-audio", 0); + if (playpaq_snd_device == NULL) { + ret = -ENOMEM; + goto err_device_alloc; + } + + platform_set_drvdata(playpaq_snd_device, &playpaq_wm8510_snd_devdata); + playpaq_wm8510_snd_devdata.dev = &playpaq_snd_device->dev; + + ret = platform_device_add(playpaq_snd_device); + if (ret) { + pr_warning("playpaq_wm8510: platform_device_add failed (%d)\n", + ret); + goto err_device_add; + } + + return 0; + + +err_device_add: + if (playpaq_snd_device != NULL) { + platform_device_put(playpaq_snd_device); + playpaq_snd_device = NULL; + } +err_device_alloc: +err_set_clk: + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } +err_pll0: + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } +err_gclk0: + if (ssc != NULL) { + ssc_free(ssc); + ssc = NULL; + } +err_ssc: + return ret; +} + + +static void __exit playpaq_asoc_exit(void) +{ + struct at32_ssc_info *ssc_p = playpaq_wm8510_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + if (_gclk0 != NULL) { + clk_put(_gclk0); + _gclk0 = NULL; + } + if (_pll0 != NULL) { + clk_put(_pll0); + _pll0 = NULL; + } + +#if defined CONFIG_AT32_ENHANCED_PORTMUX + at32_free_pin(MCLK_PIN); +#endif + + platform_device_unregister(playpaq_snd_device); + playpaq_snd_device = NULL; +} + +module_init(playpaq_asoc_init); +module_exit(playpaq_asoc_exit); + +MODULE_AUTHOR("Geoffrey Wossum <gwossum(a)acm.org>"); +MODULE_DESCRIPTION("ASoC machine driver for LRS PlayPaq"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 0000000..4e191df --- /dev/null +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,329 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou(a)atmel.com> + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino <fmandarino(a)endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + int ret; + + /* codec system clock is supplied by PCK0, set to 12MHz */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + + dev_dbg(rtd->socdev->dev, "shutdown"); +} + +static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct atmel_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + int ret; + + unsigned int rate; + int cmr_div, period; + + if (ssc == NULL) { + printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* + * The SSC clock dividers depend on the sample rate. The CMR.DIV + * field divides the system master clock MCK to drive the SSC TK + * signal which provides the codec BCLK. The TCMR.PERIOD and + * RCMR.PERIOD fields further divide the BCLK signal to drive + * the SSC TF and RF signals which provide the codec DACLRC and + * ADCLRC clocks. + * + * The dividers were determined through trial and error, where a + * CMR.DIV value is chosen such that the resulting BCLK value is + * divisible, or almost divisible, by (2 * sample rate), and then + * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. + */ + rate = params_rate(params); + + switch (rate) { + case 8000: + cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */ + period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */ + break; + case 11025: + cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */ + period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */ + break; + case 16000: + cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */ + period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */ + break; + case 22050: + cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */ + period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */ + break; + case 32000: + cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */ + period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */ + break; + case 44100: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */ + break; + case 48000: + cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */ + period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */ + break; + case 88200: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */ + break; + case 96000: + cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */ + period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */ + break; + default: + printk(KERN_WARNING "unsupported rate %d" + " on at91sam9g20ek board\n", rate); + return -EINVAL; + } + + /* set the MCK divider for BCLK */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div); + if (ret < 0) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* set the BCLK divider for DACLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_TCMR_PERIOD, period); + } else { + /* set the BCLK divider for ADCLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_RCMR_PERIOD, period); + } + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops at91sam9g20ek_ops = { + .startup = at91sam9g20ek_startup, + .hw_params = at91sam9g20ek_hw_params, + .shutdown = at91sam9g20ek_shutdown, +}; + + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec) +{ + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + /* Add specific widgets */ + snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets, + ARRAY_SIZE(at91sam9g20ek_dapm_widgets)); + /* Set up specific audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + /* not connected */ + snd_soc_dapm_disable_pin(codec, "RLINEIN"); + snd_soc_dapm_disable_pin(codec, "LLINEIN"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &wm8731_dai, + .init = at91sam9g20ek_wm8731_init, + .ops = &at91sam9g20ek_ops, +}; + +static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { + .name = "WM8731", + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, +}; + +static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_device at91sam9g20ek_snd_devdata = { + .machine = &snd_soc_machine_at91sam9g20ek, + .platform = &atmel_soc_platform, + .codec_dev = &soc_codec_dev_wm8731, + .codec_data = &at91sam9g20ek_wm8731_setup, +}; + +static struct platform_device *at91sam9g20ek_snd_device; + +static int __init at91sam9g20ek_init(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + int ret; + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); + if (!at91sam9g20ek_snd_device) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + ret = -ENOMEM; + } + + platform_set_drvdata(at91sam9g20ek_snd_device, + &at91sam9g20ek_snd_devdata); + at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev; + + ret = platform_device_add(at91sam9g20ek_snd_device); + if (ret) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + platform_device_put(at91sam9g20ek_snd_device); + } + + return ret; + +err_ssc: + return ret; +} + +static void __exit at91sam9g20ek_exit(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + platform_device_unregister(at91sam9g20ek_snd_device); + at91sam9g20ek_snd_device = NULL; +} + +module_init(at91sam9g20ek_init); +module_exit(at91sam9g20ek_exit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou(a)atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_LICENSE("GPL"); -- 1.5.3.7

4 16

[alsa-devel] TASCAM US122L
by Fernando Perfumo 06 Oct '08

06 Oct '08

Hello all, following is an extract of kern.log when connecting and disconecting a TASCAM US122L : ( the pcm part of the us122L does not appear in /proc/asound/... but only the midi part. kernel : 2.6.27-rc5-git11, alsa-driver-1.0.18rc3 compiled separately of the kernel sources, alsa-lib-1.0.18rc3 and alsa-utils-1.0.18rc3 ) I'd appreciate some ideas about the segfault in alsactl and the ausence of the pcm functionality.. Thanks many, Fernando. Oct 6 14:18:17 64studio kernel: usb 2-1: new high speed USB device using ehci_hcd and address 10 Oct 6 14:18:17 64studio kernel: usb 2-1: config 1 interface 1 altsetting 1 bulk endpoint 0x83 has invalid maxpacket 9 Oct 6 14:18:17 64studio kernel: usb 2-1: configuration #1 chosen from 1 choice Oct 6 14:18:17 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/us122l.c:538: ffff880037942000:0 Oct 6 14:18:17 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/us122l.c:538: ffff88005e018000:1 Oct 6 14:18:17 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/us122l.c:103: 0 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/us122l.c:103: 0 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:61: idle=-18 ul=1518 ps=1536 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:61: idle=0 ul=1554 ps=1536 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:714: 23 106 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:738: 1 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:61: idle=-12 ul=1524 ps=1536 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:61: idle=-30 ul=1518 ps=1536 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 0 6 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 0 11 46 0 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 0 88 46 -6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 0 176 46 -12 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 0 253 46 -18 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 1518 6 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 1518 11 46 0 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 1518 242 46 -6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 3036 6 47 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 4590 5 46 0 Oct 6 14:18:18 .... .............................................................. Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 44538 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:738: 3 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 46056 5 47 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 50688 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-ker.................................. ......................................................................................................................................................................... Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 93696 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 95220 5 47 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:738: 3 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 99846 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb.............................................................. ...................................................................................................................................................................... Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 153576 5 47 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 158208 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 165882 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:552: 173556 5 46 6 Oct 6 14:18:18 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:738: 3 Oct 6 14:18:19 64studio last message repeated 2 times Oct 6 14:18:19 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usbmidi.c:1368: created 1 output and 1 input ports Oct 6 14:18:19 64studio kernel: alsactl[25592]: segfault at 0 ip 00007fb5c9e2f5a0 sp 00007fffd26840b8 error 4 in libc-2.3.6.so[7fb5c9dbd000+121000] Oct 6 14:18:19 64studio kernel: alsactl[25594]: segfault at 0 ip 00007fc0e9fc45a0 sp 00007ffff2819238 error 4 in libc-2.3.6.so[7fc0e9f52000+121000] Oct 6 14:18:19 64studio kernel: alsactl[25670]: segfault at 0 ip 00007fd7550975a0 sp 00007fff5d8ee318 error 4 in libc-2.3.6.so[7fd755025000+121000] Oct 6 14:18:19 64studio kernel: alsactl[25671]: segfault at 0 ip 00007f2ab8cc65a0 sp 00007fffc151cf38 error 4 in libc-2.3.6.so[7f2ab8c54000+121000] Oct 6 14:18:47 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:456: underrun, status=4294967225 Oct 6 14:18:47 64studio kernel: ALSA /usr/src/alsa-driver-1.0.18rc3/usb/usx2y/../../alsa-kernel/usb/usx2y/usb_stream.c:456: underrun, status=4294967225 Oct 6 14:18:47 64studio kernel: usb 2-1: USB disconnect, address 10

2 1

[alsa-devel] [PATCH] [ALSA] Allow setting codec register with sys filesystem
by Troy Kisky 06 Oct '08

06 Oct '08

i.e. echo 6 59 >/sys/devices/platform/soc-audio.0/codec_reg will set register 0x06 to a value of 0x59 Signed-off-by: Troy Kisky <troy.kisky(a)boundarydevices.com> diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index ad38113..df23b23 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -1002,7 +1002,33 @@ static ssize_t codec_reg_show(struct device *dev, return count; } -static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL); + +static ssize_t codec_reg_write(struct device *dev, + struct device_attribute *attr, const char *buf, size_t count) +{ + char *start = (char *)buf; + unsigned long reg, value; + int step = 1; + struct snd_soc_device *devdata = dev_get_drvdata(dev); + struct snd_soc_codec *codec = devdata->codec; + + if (codec->reg_cache_step) + step = codec->reg_cache_step; + + while (*start == ' ') + start++; + reg = simple_strtoul(start, &start, 16); + if ((reg >= codec->reg_cache_size) || (reg % step)) + return -EINVAL; + while (*start == ' ') + start++; + if (strict_strtoul(start, 16, &value)) + return -EINVAL; + codec->write(codec, reg, value); + return start - buf; +} + +static DEVICE_ATTR(codec_reg, 0644, codec_reg_show, codec_reg_write); /** * snd_soc_new_ac97_codec - initailise AC97 device -- 1.5.4.3

3 3