January 2008 - Alsa-devel - mailman.alsa-project.org

[alsa-devel] [ASoc] TDM over one SSC channel on AT91 possible?
by Friedrich Lobenstock 24 Jun '11

24 Jun '11

Hello! The background: I'm just designing an ATMEL AT91RM9200 based board which got two TLV320AIC33 on board. It is either possible to hook up the two TLV320AIC33 to a separate SSC (synchronous serial control) channel each or use one SSC channel and configure it for TDM (time division multiplex) mode. There is already a driver for TLV320AIC14k/TLV320AIC2k in the development tree, so adding support for the TLV320AIC33 should be feasible. What I'm not sure about is the fact if ASOC is prepared for using channels, especially SSC, in TDM mode. Is the core ASOC structure prepared to handle that? Would we be better off instantiate one drive twice each time with different parameters for the SSC channel? Thanks for any feedback. -- MfG / Regards Friedrich Lobenstock _________________________________________________________ SCOTTY Group Austria GmbH a SCOTTY Group plc company, http://www.scottygroup.com/ _________________________________________________________

4 3

[alsa-devel] [RFC] virtual master control for HD-audio
by Takashi Iwai 06 May '08

06 May '08

Hi, another thing I'd like to push into the next kernel is the virtual master volume control. As I posted in earlier posts, it adds virtual controls that have several slave controls with the same types, e.g. Front, Surround, Center, LFE, etc. Then these are adjusted simultaneously via the master control. It'd be appreciated if some one can test the patches with HD-audio h/w that has no master control yet (e.g. some STAC codecs). Note that this won't add the master volumes if there are no real volume controls. Some codecs have really no volume control, and this won't help for such devices. Two (and one for driver) patches will follow after this. Takashi

5 27

[alsa-devel] Altec Lansing FX5051 mixer
by Jeremy Nickurak 03 Apr '08

03 Apr '08

I recently purchased an Altec Lansing USB Surround speaker set. (It's a set of 5.1 speakers, with a built-in USB sound card). I've got about a week before the return policy expires and I'd have to return it. The mixer doesn't work at all w/linux kernel 2.6.22, everything is locked at 100% volume, which is pretty unhelpful, as it's the only way to adjust the volume. (no analog controls). Also, the digital control panel locks up when the speakers power up, further preventing any access to the volume controls. The device works out-of-the-box without any drivers under XP, so I have to so-far assume that alsa's usb-audio is missing something. Any thoughts as to what could be wrong? I'm more than happy to prod the device and submit any information I can extract about it, or even potentially opening the device up for remote access if a reputable developer is interested in examining it. -- Jeremy Nickurak -= Email/Jabber: atrus(a)rifetech.com =-

3 4

[alsa-devel] ALSA driver for Native Instruments sound hardware
by Daniel Mack 23 Mar '08

23 Mar '08

Hi, some months after the last posting, we finally managed to finish a new version of the ALSA driver for Native Instruments' external USB sound cards such as "Rig Kontrol 2", "Kore Kontroller", "Audio Kontrol 1" and "Audio 8 DJ". Compared to the last release, the following things were changed: - the streaming logic was completely reworked so that multiple substreams are handled correctly - a Linux input device layer was added to support the knobs, buttons and pedals on "Rig Kontrol 2" and "AudioKontrol 1" - workqueues were entirely removed from the code - most data structures are now allocated within one big struct to avoid multiple, smaller allocations - many more cleanups according to Clemens' reply on my last posting[1] The driver was properly tested with all the mentioned hardware on both record and playback channels. The patchset should apply to the current mecurial alsa-kernel tree. Please let me know what you think. Best regards, Daniel [1] http://article.gmane.org/gmane.linux.alsa.devel/34324/ Signed-off-by: Daniel Mack <daniel(a)caiaq.org> Signed-off-by: Karsten Wiese <fzu(a)wemgehoertderstaat.de>

4 10

Re: [alsa-devel] a7839e96 (PNP: increase max resources) breaks my ALSA intel8x0 sound card
by Robert Hancock 27 Feb '08

27 Feb '08

Avuton Olrich wrote: > With v2.6.24 my second ALSA sound device stopped working. > > After bisection it says this was the offending commit. > > a7839e960675b549f06209d18283d5cee2ce9261 is first bad commit > commit a7839e960675b549f06209d18283d5cee2ce9261 > Author: Zhao Yakui <yakui.zhao(a)intel.com> > Date: Wed Nov 28 16:21:21 2007 -0800 > > PNP: increase the maximum number of resources > > On some systems the number of resources(IO,MEM) returnedy by PNP device is > greater than the PNP constant, for example motherboard devices. It brings > that some resources can't be reserved and resource confilicts. This will > cause PCI resources are assigned wrongly in some systems, and cause hang. > This is a regression since we deleted ACPI motherboard driver and use PNP > system driver. > > [akpm(a)linux-foundation.org: fix text and coding-style a bit] > Signed-off-by: Li Shaohua <shaohua.li(a)intel.com> > Signed-off-by: Zhao Yakui <yakui.zhao(a)intel.com> > Cc: Bjorn Helgaas <bjorn.helgaas(a)hp.com> > Cc: Thomas Renninger <trenn(a)suse.de> > Cc: <stable(a)kernel.org> > Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> > Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> > > The audio device is 00:1b.0 (see my lspci -vvv output), the other > audio device works fine. > > http://avuton.googlepages.com/v2.6-before (dmesg revision before) > http://avuton.googlepages.com/v2.6-after (dmesg broken revision) > http://avuton.googlepages.com/lspci-vvv > http://avuton.googlepages.com/config (from the broken revision) > http://avuton.googlepages.com/iomem > http://avuton.googlepages.com/ioports Here's why the driver fails to load: [ 31.133060] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 31.133141] PCI: Unable to reserve mem region #1:4000@febf8000 for device 0000:00:1b.0 [ 31.133197] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 31.133244] HDA Intel: probe of 0000:00:1b.0 failed with error -16 The iomem location of the HDA controller conflicts with this reservation by the BIOS: [ 22.906654] system 00:08: iomem range 0xfebfa000-0xfebfac00 has been reserved There was a patch floating around to ignore PnPACPI reservations which conflict with PCI BARs, which appears to be what's happening in this case. That patch originally worked for any board, but was later made specific to a certain Supermicro motherboard which had the sata_nv controller MMIO regions marked as reserved, preventing the driver from loading. We may need a more general solution. See: https://bugzilla.redhat.com/show_bug.cgi?id=313491

5 24

Re: [alsa-devel] hdsp rpm support
by kgrill＠chello.at 25 Feb '08

25 Feb '08

I started to work on this about a year ago, but had to stop because my son took the card to Istanbul where he spent a year studying. I'll get back to it in the next days, and depending on how much has changed in the meantime I may get something ready by the end of January. regards kg

3 4

[alsa-devel] Notebook Toshiba satellite x200-21g with realtek snd-hda-intel audio device still not supported (codec ALC268)
by Daniele (Mastro) 19 Feb '08

19 Feb '08

hi all i'm new to this mailing list i've bought a laptop and i would like to help you supporting my sound card what works: 2 speaker, low volume (it should be a 5+1 audio card) what doesn't -) low volume -) inoperating headphone jack -) not working mic -) no subwoofer -) may be some other stuff not tested ( SPDIF? hardware midi?) with speaker-test -t wav -c 6 only front left/right channel works my kernel is a debian kernel Linux Luffy 2.6.23-1-686-bigmem #1 SMP Wed Dec 5 02:42:05 UTC 2007 i686 GNU/Linux alsa 1.0.15 drivers (compiled with debian-way: module-assistant a-i alsa-source) i've already tried all the option i could think about auto (default) toshiba 3stacks 3stacks-6ch 3stacks-6ch-dig neither one has better/worst behavior I've checked the module has toke those option by cat /sys/module/snd_hda_intel/parameters/model anyway I've read the ALSA-Configuration.txt shipped with kernel and for Codec ALC268 it only has 4 options ALC268 3stack 3-stack model toshiba Toshiba A205 acer Acer laptops auto auto-config reading BIOS (default) I've googled a bit and i found out that the Toshiba A205 has completely different problem.. the sound doesn't work with it.. reading the changelog from 1.0.14 to 1.0.15 (alsa) it say: Added the proper model=toshiba for Toshiba A305 with ALC268 codec. so i think my audio card is an unknown model the laptop is brand new and i only found this model in Italy anyway i think that the same audio card is shipped with the Toshiba Satellite x205-S7483 witch is an american laptop some info about the audio card: lspci -n 00:1b.0 0403: 8086:284b (rev 03) lspci -vvv 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Toshiba America Info Systems Unknown device ff00 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at f6600000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5) cat /proc/asound/card0/codec#0 Codec: Realtek ALC268 Address: 0 Vendor Id: 0x10ec0268 Subsystem Id: 0x1179ff0a Revision Id: 0x100003 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x40 0x40] PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital PCM: rates [0x5e0]: 44100 48000 88200 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Audio Input] wcaps 0x100111: Stereo PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x100111: Stereo PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] Connection: 1 0x02 Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] Connection: 2 0x02 0x1d Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] Connection: 3 0x03 0x1d 0x02 Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Node 0x13 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081003c: IN OUT HP EAPD Detect Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x40: OUT Connection: 1 0x0f Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x081003c: IN OUT HP EAPD Detect Pin Default 0x0221101f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0xc0: OUT HP Connection: 1 0x10 Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x00: Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083734: IN OUT Detect Pin Default 0x02a11830: [Jack] Mic at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x24: IN Connection: 1 0x02 Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0 Amp-In vals: Pincap 0x083724: IN Detect Pin Default 0x99a30931: [Fixed] Mic at Int ATAPI Conn = ATAPI, Color = Unknown Pin-ctls: 0x24: IN Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0 Amp-In vals: [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083734: IN OUT Detect Pin Default 0x0281103e: [Jack] Line In at Ext Front Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Connection: 1 0x02 Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x4016852d: [N/A] Speaker at Ext N/A Conn = Digital, Color = Purple Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital Pincap 0x0810: OUT Pin Default 0x02451120: [Jack] SPDIF Out at Ext Front Conn = Optical, Color = Black Pin-ctls: 0x40: OUT Connection: 1 0x06 Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x1f 0x1f] Connection: 7 0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12 Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1 Amp-Out vals: [0x8a 0x8a] Connection: 7 0x18 0x19 0x1a* 0x1c 0x14 0x15 0x13 many of this think doesn't mean a thing to me but i will be glad to help you if you ask.. i don't mind compiling some other driver/kernel/tool for this just ask me one last note: searching the internet i've found this page: https://wiki.ubuntu.com/Gutsy_Intel_HD_Audio_Controller if you go down you find that the Toshiba Satellite x205-S7483 has the exact same problem here. I think they have the same card searching the Realtek web site i didn't find any 6 channel audio card with the ALC268 codec may be this mean the ALC268 is not the right codec for my audio card or this is a really new model/heavily Toshiba modified device i've already filed a bug https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3659 please ask me if you need any more info or want me to do some test thanks you all for your work ps: i've subscribed to vger mailing list, what's the right mailing list for alsa-devel? -- Daniele Segato

3 29

[alsa-devel] Digital-Out (Toslink) on HDA-Intal (AD1986A)?
by Martin Egge 12 Feb '08

12 Feb '08

Hi, is there any way to use the digital output via toslink on my Samsung P50 notebook? It has an integrated Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller. The soundchip is supported via HDA-Intel and the codec is Analog Devices AD1986A. If the digital output is not supported at the moment, I'd like to help the developers with information, testing an even coding. You can find all alsa related information about my system at [1] Regards Martin [1] http://pastebin.ca/852506

2 39

[alsa-devel] Intel ICH7/Realtek ALC262 on MSI MS-7290 (Crystal 945)
by Matthew R. Hurne 11 Feb '08

11 Feb '08

Greetings, I am running Linux on an MSI Crystal 945, which has a highly-integrated MS-7290 mainboard. This board includes an Intel ICH7 southbridge and a Realtek ALC262 codec. The board has integrated microphone, line-in and line-out jacks (labeled AUDIO-JK1 on the board). In addition, the unit has internal speakers. The speakers are connected to an MSI MS-4088; a small board which also hosts the unit's power button. The MS-4088 is connected to the MS-7290 mainboard with some bundled wires. ALSA appears to accurately determine that the unit has an ICH7 and ALC262, and I am able to use alsamixer to adjust levels. I am also able to use aplay without any reported errors. However, no audio is heard from the units internal speakers. I have passed every possible model (as listed in ALSA-Configuration.txt) to the ALSA driver (snd-hda-intel), to no avail. For some of the models (or perhaps all; I unfortunately did not pay close attention to this detail), audio IS heard through headphones plugged in to the unit's line-out jack. However, the audio heard is at an extremely low volume, even if all the mixer levels are unmuted and set to 100%. Note that if the driver is loaded without specifying a model, or when specifying "model=auto", I see the following from dmesg: hda_codec: Unknown model for ALC262, trying auto-probe from BIOS... I have tried the following versions of ALSA: 1.0.14, 1.0.15, 1.0.16rc1. The unit is running Linux kernel version 2.6.15.7-kiosk-1; it is vanilla 2.6.15.7 patched for unionfs, squashfs and bootsplash. I am attaching the contents of /proc/asound/card0/codec#0 and lspci -vv. I also have a graph generated by codecgraph, but won't attach it now since it will cause my message to be large enough to await moderator approval. The version of GCC used to compile ALSA is 3.3.5: root@kiosk:~# gcc -v Reading specs from /usr/lib/gcc-lib/i486-slackware-linux/3.3.5/specs Configured with: ../gcc-3.3.5/configure --prefix=/usr --enable-shared --enable-threads=posix --enable-__cxa_atexit --disable-checking --with-gnu-ld --verbose --target=i486-slackware-linux --host=i486-slackware-linux Thread model: posix gcc version 3.3.5 I would not be surprised if this is a board configuration the ALSA team has not yet dealt with. As far as I can tell, the MS-7290 was designed specifically for the Crystal 945 barebones unit, so its probably not in widespread use. Is there someone who would be willing to work with me to get this working? Just let me know what you need, and I'll do my best to provide it. BTW, I did have to "hack" the alsa-driver 1.0.16rc1 source to get the various ALSA kernel modules to load (removed unresolved references to do_posix_clock_monotonic_gettime; I think tiwai's fix in include/adriver.h could be applied elsewhere, but I just removed the references altogether). Regards, -- Matthew Hurne Versatile Systems, Inc. 717.919.9102 matthew.hurne(a)versatile.com Codec: Realtek ALC262 Address: 0 Vendor Id: 0x10ec0262 Subsystem Id: 0x1462043d Revision Id: 0x100202 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=4, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1 IO[1]: enable=1, dir=1, wake=0, sticky=0, data=1 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0 Node 0x02 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x11: Stereo Converter: stream=0, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital Converter: stream=0, channel=0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Node 0x07 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x24 Node 0x08 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x23 Node 0x09 [Audio Input] wcaps 0x10011b: Stereo Amp-In Amp-In caps: ofs=0x08, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x00 0x00] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0x6]: 16 20 formats [0x1]: PCM Connection: 1 0x22 Node 0x0a [Audio Input] wcaps 0x100391: Stereo Digital Converter: stream=0, channel=0 SDI-Select: 0 Digital: Digital category: 0x0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0x1e]: 16 20 24 32 formats [0x1]: PCM Unsolicited: tag=00, enabled=0 Connection: 1 0x1f Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x81 0x81] [0x81 0x81] [0x81 0x81] Connection: 8 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 Node 0x0c [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x02 0x0b Node 0x0d [Audio Mixer] wcaps 0x20010f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00 0x00] Connection: 2 0x03 0x0b Node 0x0e [Audio Mixer] wcaps 0x20010e: Mono Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00] [0x00] Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=0 Amp-Out vals: [0x00] Connection: 2 0x02 0x0b Node 0x0f [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x12 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x00: Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x083e: IN OUT HP Detect Trigger Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x083e: IN OUT HP Detect Trigger Pin Default 0x0121411f: [Jack] HP Out at Ext Rear Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Misc = NO_PRESENCE Pin-ctls: 0xc0: OUT HP Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80] Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Connection: 1 0x0e Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 Pin Default 0x01a19920: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x2, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x24: IN VREF_80 Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x19 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 Pin Default 0x0181312f: [Jack] Line In at Ext Rear Conn = 1/8, Color = Blue DefAssociation = 0x2, Sequence = 0xf Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x1b [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0 Amp-In vals: [0x00 0x00] [0x00 0x00] Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x80 0x80] Pincap 0x08173e: IN OUT HP Detect Trigger Vref caps: HIZ 50 GRD 80 Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=00, enabled=0 Connection: 2 0x0c* 0x0d Node 0x1c [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1d [Pin Complex] wcaps 0x400000: Mono Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x40: OUT Unsolicited: tag=00, enabled=0 Connection: 1 0x06 Node 0x1f [Pin Complex] wcaps 0x400280: Mono Digital Pincap 0x0820: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE Pin-ctls: 0x20: IN Unsolicited: tag=00, enabled=0 Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono Processing caps: benign=0, ncoeff=17 Node 0x21 [Volume Knob Widget] wcaps 0x600080: Mono Volume-Knob: delta=0, steps=32, direct=0, val=64 Unsolicited: tag=00, enabled=0 Connection: 0 Node 0x22 [Audio Selector] wcaps 0x300101: Stereo Connection: 10 0x18* 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b 0x12 Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b Node 0x24 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] Connection: 9 0x18 0x19 0x1a 0x1b 0x1c 0x1d 0x14 0x15 0x0b 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 02) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] #09 [5109] 00:02.0 VGA compatible controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) (prog-if 00 [VGA]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at ff00 [size=8] Region 2: Memory at b0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at fdf80000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller: Intel Corporation 945G Integrated Graphics Controller (rev 02) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Region 0: Memory at fde80000 (32-bit, non-prefetchable) [disabled] [size=512K] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] #10 [0091] 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fdc00000-fdcfffff Prefetchable memory behind bridge: 00000000fdd00000-00000000fdd00000 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [40] #10 [0141] Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 3 Region 4: I/O ports at fe00 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at fd00 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 9 Region 4: I/O ports at fc00 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at fb00 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 3 Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=02, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: cc000000-d7ffffff Prefetchable memory behind bridge: 00000000fdb00000-00000000fdb00000 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] #09 [100c] 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 80 [Master]) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 0 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at fa00 [size=16] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 11 Region 4: I/O ports at 0500 [size=32] 01:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, cache line size 10 Interrupt: pin A routed to IRQ 10 Region 0: Memory at fdce0000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at df00 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] #10 [0001] 02:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin A routed to IRQ 10 Region 0: Memory at d7fff000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=03, subordinate=06, sec-latency=176 Memory window 0: cc000000-cdfff000 (prefetchable) Memory window 1: ce000000-cffff000 I/O window 0: 0000e000-0000e0ff I/O window 1: 0000e400-0000e4ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 02:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 82) Subsystem: Micro-Star International Co., Ltd.: Unknown device 2900 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 168 Interrupt: pin B routed to IRQ 5 Region 0: Memory at d7ffd000 (32-bit, non-prefetchable) [size=4K] Bus: primary=02, secondary=07, subordinate=0a, sec-latency=176 Memory window 0: d0000000-d1fff000 (prefetchable) Memory window 1: d2000000-d3fff000 I/O window 0: 0000e800-0000e8ff I/O window 1: 0000ec00-0000ecff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001

4 10

[alsa-devel] [PATCH] SND_SEQ_BLOCK and SND_SEQ_PORT_CAP_NONE defines
by Aldrin Martoq 07 Feb '08

07 Feb '08

Hey hackers, While developing pyalsa sequencer API, I found that sometimes 0 is used instead of a #defined value or constant. In my opinion, given that the alsa API is opaque (hides internal structure and provides methods for accessing them), we should define those missing "constants" for being consistent. So far I found: SND_SEQ_BLOCK 0 (blocking mode) SND_SEQ_PORT_CAP_NONE (the port defines no access capabilites) BTW, Thanks Jaroslav for putting my code; I will send 3rd patch for covering the missing items of the python API sequencer when I'll finish it. Signed-off-by: Aldrin Martoq <amartoq(a)dcc.uchile.cl> --- diff --git a/include/seq.h b/include/seq.h --- a/include/seq.h +++ b/include/seq.h @@ -56,7 +56,8 @@ typedef struct _snd_seq snd_seq_t; /** * sequencer opening mode */ -#define SND_SEQ_NONBLOCK 0x0001 /**< non-blocking mode (flag to open mode) */ +#define SND_SEQ_BLOCK 0x0000 /**< blocking opening mode (flag for #snd_seq_open, #snd_seq_nonblock) */ +#define SND_SEQ_NONBLOCK 0x0001 /**< non-blocking opening mode (flag for #snd_seq_open, #snd_seq_nonblock) */ /** sequencer handle type */ typedef enum _snd_seq_type { @@ -204,6 +205,7 @@ typedef struct _snd_seq_port_info snd_se #define SND_SEQ_PORT_SYSTEM_ANNOUNCE 1 /**< system announce port */ /** port capabilities (32 bits) */ +#define SND_SEQ_PORT_CAP_NONE (0<<0) /**< port has no access capabilities */ #define SND_SEQ_PORT_CAP_READ (1<<0) /**< readable from this port */ #define SND_SEQ_PORT_CAP_WRITE (1<<1) /**< writable to this port */ diff --git a/src/seq/seq.c b/src/seq/seq.c --- a/src/seq/seq.c +++ b/src/seq/seq.c @@ -958,7 +958,7 @@ static int snd_seq_open_noupdate(snd_seq * \note Internally, these are translated to \c O_WRONLY, \c O_RDONLY and * \c O_RDWR respectively and used as the second argument to the C library * open() call. - * \param mode Optional modifier. Can be either 0, or + * \param mode Optional modifier. Can be either #SND_SEQ_BLOCK, or * #SND_SEQ_NONBLOCK, which will make read/write operations * non-blocking. This can also be set later using #snd_seq_nonblock(). * \return 0 on success otherwise a negative error code @@ -2161,8 +2161,9 @@ void snd_seq_port_info_set_timestamp_que * Each port has the capability bit-masks to specify the access capability * of the port from other clients. * The capability bit flags are defined as follows: + * - #SND_SEQ_PORT_CAP_NONE No access capabilities * - #SND_SEQ_PORT_CAP_READ Readable from this port - * - #SND_SEQ_PORT_CAP_WRITE Writable to this port. + * - #SND_SEQ_PORT_CAP_WRITE Writable to this port * - #SND_SEQ_PORT_CAP_SYNC_READ For synchronization (not implemented) * - #SND_SEQ_PORT_CAP_SYNC_WRITE For synchronization (not implemented) * - #SND_SEQ_PORT_CAP_DUPLEX Read/write duplex access is supported -- Aldrin Martoq

3 4