[Sound-open-firmware] [PATCH v5 4/4] vhost: add an RPMsg API
Mathieu Poirier
mathieu.poirier at linaro.org
Fri Sep 11 19:33:13 CEST 2020
On Fri, Sep 11, 2020 at 09:46:56AM +0200, Guennadi Liakhovetski wrote:
> Hi Mathieu,
>
> On Thu, Sep 10, 2020 at 11:22:11AM -0600, Mathieu Poirier wrote:
> > Good morning Guennadi,
> >
> > On Thu, Sep 10, 2020 at 10:38:54AM +0200, Guennadi Liakhovetski wrote:
> > > Hi Mathieu,
> > >
> > > On Wed, Sep 09, 2020 at 04:39:46PM -0600, Mathieu Poirier wrote:
> > > > Good afternoon,
> > > >
> > > > On Wed, Aug 26, 2020 at 07:46:36PM +0200, Guennadi Liakhovetski wrote:
> > > > > Linux supports running the RPMsg protocol over the VirtIO transport
> > > > > protocol, but currently there is only support for VirtIO clients and
> > > > > no support for a VirtIO server. This patch adds a vhost-based RPMsg
> > > > > server implementation.
> > > >
> > > > This changelog is very confusing... At this time the name service in the
> > > > remoteproc space runs as a server on the application processor. But from the
> > > > above the remoteproc usecase seems to be considered to be a client
> > > > configuration.
> > >
> > > I agree that this isn't very obvious. But I think it is common to call the
> > > host "a server" and guests "clients." E.g. in vhost.c in the top-of-thefile
> > > comment:
> >
> > Ok - that part we agree on.
> >
> > >
> > > * Generic code for virtio server in host kernel.
> > >
> > > I think the generic concept behind this notation is, that as guests boot,
> > > they send their requests to the host, e.g. VirtIO device drivers on guests
> > > send requests over VirtQueues to VirtIO servers on the host, which can run
> > > either in the user- or in the kernel-space. And I think you can follow that
> >
> > I can see that process taking place. After all virtIO devices on guests are
> > only stubs that need host support for access to HW.
> >
> > > logic in case of devices or remote processors too: it's the main CPU(s)
> > > that boot(s) and start talking to devices and remote processors, so in that
> > > sence devices are servers and the CPUs are their clients.
> >
> > In the remote processor case, the remoteproc core (application processor) sets up
> > the name service but does not initiate the communication with a remote
> > processor. It simply waits there for a name space request to come in from the
> > remote processor.
>
> Hm, I don't see that in two examples, that I looked at: mtk and virtio. In both
> cases the announcement seems to be directly coming from the application processor
> maybe after some initialisation.
>
Can you expand on that part - perhaps point me to the (virtio) code you are
referring to?
> > > And yes, the name-space announcement use-case seems confusing to me too - it
> > > reverts the relationship in a way: once a guest has booted and established
> > > connections to any rpmsg "devices," those send their namespace announcements
> > > back. But I think this can be regarded as server identification: you connect
> > > to a server and it replies with its identification and capabilities.
> >
> > Based on the above can I assume vhost_rpmsg_ns_announce() is sent from the
> > guest?
>
> No, it's "vhost_..." so it's running on the host.
Ok, that's better and confirms the usage of the VIRTIO_RPMSG_RESPONSE queue.
When reading your explanation above, I thought the term "those" referred to the
guest. In light of your explanation I now understand that "those" referred to
the rpmgs devices on the host.
In the above paragraph you write:
... "once a guest has booted and established connections to any rpmsg "devices",
those send their namespace announcements back".
I'd like to unpack a few things about this sentence:
1) In this context, how is a "connection" established between a guest and a host?
2) How does the guest now about the rpmsg devices it has made a connection to?
3) Why is a namespace announcement needed at all when guests are aware of the
rpmsg devices instantiated on the host, and have already connected to them?
> The host (the server, an
> analogue of the application processor, IIUC) sends NS announcements to guests.
I think we have just found the source of the confusion - in the remoteproc world
the application processor receives name announcements, it doesn't send them.
>
> > I saw your V7, something I will look into. In the mean time I need to bring
> > your attention to this set [1] from Arnaud. Please have a look as it will
> > impact your work.
> >
> > https://patchwork.kernel.org/project/linux-remoteproc/list/?series=338335
>
> Yes, I've had a look at that series, thanks for forwarding it to me. TBH I
> don't quite understand some choices there, e.g. creating a separate driver and
> then having to register devices just for the namespace announcement. I don't
> think creating virtual devices is taken easily in Linux. But either way I
> don't think our series conflict a lot, but I do hope that I can merge my
> series first, he'd just have to switch to using the header, that I'm adding.
> Hardly too many changes otherwise.
It is not the conflicts between the series that I wanted to highlight but the
fact that name service is in the process of becoming a driver on its own, and
with no dependence on the transport mechanism.
>
> > > > And I don't see a server implementation per se... It is more like a client
> > > > implementation since vhost_rpmsg_announce() uses the RESPONSE queue, which sends
> > > > messages from host to guest.
> > > >
> > > > Perhaps it is my lack of familiarity with vhost terminology.
> > > >
> > > > >
> > > > > Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
> > > > > ---
> > > > > drivers/vhost/Kconfig | 7 +
> > > > > drivers/vhost/Makefile | 3 +
> > > > > drivers/vhost/rpmsg.c | 373 ++++++++++++++++++++++++++++++++++++
> > > > > drivers/vhost/vhost_rpmsg.h | 74 +++++++
> > > > > 4 files changed, 457 insertions(+)
> > > > > create mode 100644 drivers/vhost/rpmsg.c
> > > > > create mode 100644 drivers/vhost/vhost_rpmsg.h
> > > > >
> > > > > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
> > > > > index 587fbae06182..046b948fc411 100644
> > > > > --- a/drivers/vhost/Kconfig
> > > > > +++ b/drivers/vhost/Kconfig
> > > > > @@ -38,6 +38,13 @@ config VHOST_NET
> > > > > To compile this driver as a module, choose M here: the module will
> > > > > be called vhost_net.
> > > > >
> > > > > +config VHOST_RPMSG
> > > > > + tristate
> > > > > + select VHOST
> > > > > + help
> > > > > + Vhost RPMsg API allows vhost drivers to communicate with VirtIO
> > > > > + drivers, using the RPMsg over VirtIO protocol.
> > > >
> > > > I had to assume vhost drivers are running on the host and virtIO drivers on the
> > > > guests. This may be common knowledge for people familiar with vhosts but
> > > > certainly obscur for commoners Having a help section that is clear on what is
> > > > happening would remove any ambiguity.
> > >
> > > It is the terminology, yes, but you're right, the wording isn't very clear, will
> > > improve.
> > >
> > > > > +
> > > > > config VHOST_SCSI
> > > > > tristate "VHOST_SCSI TCM fabric driver"
> > > > > depends on TARGET_CORE && EVENTFD
> > > > > diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
> > > > > index f3e1897cce85..9cf459d59f97 100644
> > > > > --- a/drivers/vhost/Makefile
> > > > > +++ b/drivers/vhost/Makefile
> > > > > @@ -2,6 +2,9 @@
> > > > > obj-$(CONFIG_VHOST_NET) += vhost_net.o
> > > > > vhost_net-y := net.o
> > > > >
> > > > > +obj-$(CONFIG_VHOST_RPMSG) += vhost_rpmsg.o
> > > > > +vhost_rpmsg-y := rpmsg.o
> > > > > +
> > > > > obj-$(CONFIG_VHOST_SCSI) += vhost_scsi.o
> > > > > vhost_scsi-y := scsi.o
> > > > >
> > > > > diff --git a/drivers/vhost/rpmsg.c b/drivers/vhost/rpmsg.c
> > > > > new file mode 100644
> > > > > index 000000000000..c26d7a4afc6d
> > > > > --- /dev/null
> > > > > +++ b/drivers/vhost/rpmsg.c
> > > > > @@ -0,0 +1,373 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0-only
> > > > > +/*
> > > > > + * Copyright(c) 2020 Intel Corporation. All rights reserved.
> > > > > + *
> > > > > + * Author: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
> > > > > + *
> > > > > + * Vhost RPMsg VirtIO interface. It provides a set of functions to match the
> > > > > + * guest side RPMsg VirtIO API, provided by drivers/rpmsg/virtio_rpmsg_bus.c
> > > >
> > > > Again, very confusing. The changelog refers to a server implementation but to
> > > > me this refers to a client implementation, especially if rpmsg_recv_single() and
> > > > rpmsg_ns_cb() are used on the other side of the pipe.
> > >
> > > I think the above is correct. "Vhost" indicates, that this is running on the host.
> > > "match the guest side" means, that you can use this API on the host and it is
> > > designed to work together with the RPMsg VirtIO drivers running on guests, as
> > > implemented *on guests* by virtio_rpmsg_bus.c. Would "to work together" be a better
> > > description than "to match?"
> >
> > Lets forget about this part now and concentrate on the above conversation.
> > Things will start to make sense at one point.
>
> I've improved that description a bit, it was indeed rather clumsy.
Much appreciated - I'll take a look a V7 next week.
>
> [snip]
>
> > > > > diff --git a/drivers/vhost/vhost_rpmsg.h b/drivers/vhost/vhost_rpmsg.h
> > > > > new file mode 100644
> > > > > index 000000000000..30072cecb8a0
> > > > > --- /dev/null
> > > > > +++ b/drivers/vhost/vhost_rpmsg.h
> > > > > @@ -0,0 +1,74 @@
> > > > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > > > +/*
> > > > > + * Copyright(c) 2020 Intel Corporation. All rights reserved.
> > > > > + *
> > > > > + * Author: Guennadi Liakhovetski <guennadi.liakhovetski at linux.intel.com>
> > > > > + */
> > > > > +
> > > > > +#ifndef VHOST_RPMSG_H
> > > > > +#define VHOST_RPMSG_H
> > > > > +
> > > > > +#include <linux/uio.h>
> > > > > +#include <linux/virtio_rpmsg.h>
> > > > > +
> > > > > +#include "vhost.h"
> > > > > +
> > > > > +/* RPMsg uses two VirtQueues: one for each direction */
> > > > > +enum {
> > > > > + VIRTIO_RPMSG_RESPONSE, /* RPMsg response (host->guest) buffers */
> > > > > + VIRTIO_RPMSG_REQUEST, /* RPMsg request (guest->host) buffers */
> > > > > + /* Keep last */
> > > > > + VIRTIO_RPMSG_NUM_OF_VQS,
> > > > > +};
> > > > > +
> > > > > +struct vhost_rpmsg_ept;
> > > > > +
> > > > > +struct vhost_rpmsg_iter {
> > > > > + struct iov_iter iov_iter;
> > > > > + struct rpmsg_hdr rhdr;
> > > > > + struct vhost_virtqueue *vq;
> > > > > + const struct vhost_rpmsg_ept *ept;
> > > > > + int head;
> > > > > + void *priv;
> > > >
> > > > I don't see @priv being used anywhere.
> > >
> > > That's logical: this is a field, private to the API users, so the core shouldn't
> > > use it :-) It's used in later patches.
> >
> > That is where structure documentation is useful. I will let Michael decide what
> > he wants to do.
>
> I can add some kerneldoc documentation there, no problem.
>
> > Thanks for the feedback,
>
> Thanks for your reviews! I'd very much like to close all the still open points
> and merge the series ASAP.
>
> Thanks
> Guennadi
>
> > Mathieu
> >
> > >
> > > >
> > > > > +};
> > > > > +
> > > > > +struct vhost_rpmsg {
> > > > > + struct vhost_dev dev;
> > > > > + struct vhost_virtqueue vq[VIRTIO_RPMSG_NUM_OF_VQS];
> > > > > + struct vhost_virtqueue *vq_p[VIRTIO_RPMSG_NUM_OF_VQS];
> > > > > + const struct vhost_rpmsg_ept *ept;
> > > > > + unsigned int n_epts;
> > > > > +};
> > > > > +
> > > > > +struct vhost_rpmsg_ept {
> > > > > + ssize_t (*read)(struct vhost_rpmsg *, struct vhost_rpmsg_iter *);
> > > > > + ssize_t (*write)(struct vhost_rpmsg *, struct vhost_rpmsg_iter *);
> > > > > + int addr;
> > > > > +};
> > > > > +
> > > > > +static inline size_t vhost_rpmsg_iter_len(const struct vhost_rpmsg_iter *iter)
> > > > > +{
> > > > > + return iter->rhdr.len;
> > > > > +}
> > > >
> > > > Again, I don't see where this is used.
> > >
> > > This is exported API, it's used by users.
> > >
> > > > > +
> > > > > +#define VHOST_RPMSG_ITER(_vq, _src, _dst) { \
> > > > > + .rhdr = { \
> > > > > + .src = cpu_to_vhost32(_vq, _src), \
> > > > > + .dst = cpu_to_vhost32(_vq, _dst), \
> > > > > + }, \
> > > > > + }
> > > >
> > > > Same.
> > >
> > > ditto.
> > >
> > > Thanks
> > > Guennadi
> > >
> > > > Thanks,
> > > > Mathieu
> > > >
> > > > > +
> > > > > +void vhost_rpmsg_init(struct vhost_rpmsg *vr, const struct vhost_rpmsg_ept *ept,
> > > > > + unsigned int n_epts);
> > > > > +void vhost_rpmsg_destroy(struct vhost_rpmsg *vr);
> > > > > +int vhost_rpmsg_ns_announce(struct vhost_rpmsg *vr, const char *name,
> > > > > + unsigned int src);
> > > > > +int vhost_rpmsg_start_lock(struct vhost_rpmsg *vr,
> > > > > + struct vhost_rpmsg_iter *iter,
> > > > > + unsigned int qid, ssize_t len);
> > > > > +size_t vhost_rpmsg_copy(struct vhost_rpmsg *vr, struct vhost_rpmsg_iter *iter,
> > > > > + void *data, size_t size);
> > > > > +int vhost_rpmsg_finish_unlock(struct vhost_rpmsg *vr,
> > > > > + struct vhost_rpmsg_iter *iter);
> > > > > +
> > > > > +#endif
> > > > > --
> > > > > 2.28.0
> > > > >
More information about the Sound-open-firmware
mailing list