[Sound-open-firmware] MinnowBoard FW fails to boot

[Liam Girdwood]

On Fri, 2019-03-22 at 17:03 +0100, Guennadi Liakhovetski wrote:
> Hi,
> 
> Is MinnowBoard supposed to work with the current sources?
> 

Yes.

> I tried 2 boards: an older Max and a new Turbot with the same
> result. After upgrading the BIOS to 1.0 and configuring it as
> described on
> https://thesofproject.github.io/latest/getting_started/setup/setup_minnowboard_turbot.html
> and installing the ACPI scripts, I see the following in dmesg:
> 
> [    7.858284] sof-audio-acpi 80860F28:01: ACPI DSP detected
> [    7.858293] sof-audio-acpi 80860F28:01: BYT-CR not detected
> [    7.858417] sof-audio-acpi 80860F28:01: probing SOF DSP device....
> [    7.858437] sof-audio-acpi 80860F28:01: sof_probe_work entry
> [    7.858442] sof-audio-acpi 80860F28:01: LPE PHY base at 0x90a00000 size
> 0x200000
> [    7.858495] sof-audio-acpi 80860F28:01: LPE VADDR 000000005df3cd39
> [    7.858498] sof-audio-acpi 80860F28:01: IMR base at 0x20000000 size
> 0x100000
> [    7.858525] sof-audio-acpi 80860F28:01: IMR VADDR 00000000c1d6001c
> [    7.858530] sof-audio-acpi 80860F28:01: using IRQ 29
> [    7.861914] sof-audio-acpi 80860F28:01: loading firmware
> [    7.903934] sof-audio-acpi 80860F28:01: header size=0xc9a4 modules=0x1
> abi=0x1 size=16
> [    7.903980] sof-audio-acpi 80860F28:01: new module size 0xc998 blocks 0x11
> type 0x0
> [    7.903984] sof-audio-acpi 80860F28:01: block 0 type 0x1 size 0xf0
> ==>  offset 0xc0000
> [    7.904148] sof-audio-acpi 80860F28:01: block 1 type 0x1 size 0x16c
> ==>  offset 0xc0400
> [    7.904454] sof-audio-acpi 80860F28:01: block 2 type 0x1 size 0x8
> ==>  offset 0xc057c
> [    7.904461] sof-audio-acpi 80860F28:01: block 3 type 0x1 size 0x8
> ==>  offset 0xc059c
> [    7.904468] sof-audio-acpi 80860F28:01: block 4 type 0x1 size 0x8
> ==>  offset 0xc05bc
> [    7.904475] sof-audio-acpi 80860F28:01: block 5 type 0x1 size 0x8
> ==>  offset 0xc05dc
> [    7.904481] sof-audio-acpi 80860F28:01: block 6 type 0x1 size 0x8
> ==>  offset 0xc05fc
> [    7.904488] sof-audio-acpi 80860F28:01: block 7 type 0x1 size 0x4
> ==>  offset 0xc061c
> [    7.904492] sof-audio-acpi 80860F28:01: block 8 type 0x1 size 0x8
> ==>  offset 0xc063c
> [    7.904498] sof-audio-acpi 80860F28:01: block 9 type 0x1 size 0x4
> ==>  offset 0xc0658
> [    7.904502] sof-audio-acpi 80860F28:01: block 10 type 0x1 size 0x18
> ==>  offset 0xc065c
> [    7.904522] sof-audio-acpi 80860F28:01: block 11 type 0x1 size 0x8
> ==>  offset 0xc067c
> [    7.904529] sof-audio-acpi 80860F28:01: block 12 type 0x1 size 0xad20
> ==>  offset 0xc06a0
> [    7.942341] sof-audio-acpi 80860F28:01: block 13 type 0x2 size 0xc34
> ==>  offset 0x100008
> [    7.945002] sof-audio-acpi 80860F28:01: block 14 type 0x2 size 0x8
> ==>  offset 0x100c3c
> [    7.945009] sof-audio-acpi 80860F28:01: block 15 type 0x2 size 0xc50
> ==>  offset 0x100c48
> [    7.947695] sof-audio-acpi 80860F28:01: block 16 type 0x2 size 0x6c
> ==>  offset 0x101f20
> [    7.947797] sof-audio-acpi 80860F28:01: booting DSP firmware
> [    7.993488] intel_rapl: Found RAPL domain package
> [    7.993491] intel_rapl: Found RAPL domain core
> [    9.037666] sof-audio-acpi 80860F28:01: error:  unable to run DSP firmware
> [    9.038008] sof-audio-acpi 80860F28:01: error: unexpected fault 0xffffffff
> trace 0xffffffff
> [    9.038094] sof-audio-acpi 80860F28:01: error: failed to reset DSP
> [    9.038159] sof-audio-acpi 80860F28:01: error: failed to boot DSP firmware
> -19
> [    9.038266] sof-audio-acpi 80860F28:01: error: sof_probe_work failed err:
> -19

Looks like a driver regression, since 0xffffffff means PCI address space is
powered OFF when it should be ON.

Can you log as a regression on GH.

Thanks

Liam