[Sound-open-firmware] thesof/crosstool-NG: Request to change makefile to regard common tool as dependencies

Liam Girdwood liam.r.girdwood at linux.intel.com
Mon Jun 25 17:36:52 CEST 2018


On Mon, 2018-06-25 at 14:24 +0000, Wang, Long1 wrote:
> So first of all, is it possible to regard those tools(autoconf, automake, gcc,
> gdb etc.) as dependencies? That means whether we can replace them by built-in
> commands in host such as in Clear Linux?
> 

Yes, probably - this can probably be changed in the config file ?

Liam

> Best Regards,
> Wang, Long
> 
> -----Original Message-----
> From: Liam Girdwood [mailto:liam.r.girdwood at linux.intel.com] 
> Sent: Monday, June 25, 2018 9:20 PM
> To: Wang, Long1 <long1.wang at intel.com>; Pan, Xiuli <xiuli.pan at linux.intel.com>
> ; Keyon Jie <yang.jie at linux.intel.com>; sound-open-firmware at alsa-project.org
> Cc: Li, Jocelyn <jocelyn.li at linux.intel.com>
> Subject: Re: [Sound-open-firmware] thesof/crosstool-NG: Request to change
> makefile to regard common tool as dependencies
> 
> On Mon, 2018-06-25 at 06:34 +0000, Wang, Long1 wrote:
> > Hi Liam,
> > 
> > 
> > 
> > Here I worked out a spec file to fit thesof/crosstool-NG in Clear 
> > Linux building environment.
> > 
> > It worked by adding below tar-balls and some changes.
> > 
> > But except for the crosstool-ng and xtensa-overlay, the others are 
> > common tool not real source.
> > 
> > Could you change the make file to regard those common tool as dependencies?
> > 
> > 
> > 
> > Source0  : 
> > https://github.com/thesofproject/crosstool-ng/archive/sof-v1.2-gcc8
> > .1.tar.gz
> > 
> > Source1  : 
> > https://github.com/thesofproject/xtensa-overlay/archive/sof-v1.2-gc
> > c8.1.zip
> > 
> > Source20 : https://ftpmirror.gnu.org/gnu/autoconf/autoconf-2.69.tar.xz
> > 
> > Source21 : 
> > https://ftpmirror.gnu.org/gnu/automake/automake-1.16.1.tar.xz
> > 
> > Source22 : https://gmplib.org/download/gmp/gmp-6.1.2.tar.xz
> > 
> > Source23 : http://www.mpfr.org/mpfr-3.1.6/mpfr-3.1.6.tar.xz
> > 
> > Source24 : http://isl.gforge.inria.fr/isl-0.19.tar.xz
> > 
> > Source25 : http://www.multiprecision.org/downloads/mpc-1.0.3.tar.gz
> > 
> > Source26 : http://downloads.sourceforge.net/project/expat/expat/2.2.5/expat-
> > 2.
> > 2.5.tar.bz2
> > 
> > Source27 : https://ftpmirror.gnu.org/gnu/ncurses/ncurses-6.0.tar.gz
> > 
> > Source28 : https://ftpmirror.gnu.org/gnu/binutils/binutils-2.30.tar.xz
> > 
> > Source29 : 
> > https://ftpmirror.gnu.org/gnu/gcc/gcc-8.1.0/gcc-8.1.0.tar.xz
> > 
> > Source30 : https://ftpmirror.gnu.org/gnu/gdb/gdb-8.1.tar.xz
> > 
> 
> Not sure I follow, care to send a patch ?
> 
> Thanks
> 
> Liam
> _______________________________________________
> Sound-open-firmware mailing list
> Sound-open-firmware at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/sound-open-firmware


More information about the Sound-open-firmware mailing list