[Sound-open-firmware] [PATCH 0/6] SSP-IPC: move SSP-specific fields

[Liam Girdwood]

On Wed, 2018-04-04 at 20:43 -0500, Pierre-Louis Bossart wrote:
> Align SSP fields definition with ALSA topology ones and
> group SSP-specific fields in single structure.
> 
> This is required before we enable DMIC, and will help
> add new SSP fields for always-on clocks, quirks, etc
> (exact definition WIP)
> 
> These patches were tested on Baytrail and compile-tested on APL.
> Due to the IPC change, kernel patches are required, available at: 
> https://github.com/plbossart/sound/tree/topic/sof-v4.14-rename-ssp
> No SOFT patches are necessary.
> 
> This patchset needs to be applied on top of the SOF renames.
> It follows the same order as the kernel patches to allow for
> some level of bisection across the two domains.
> 
> 
> Pierre-Louis Bossart (6):
>   uapi: ipc: align ipc.h with kernel
>   uapi: ipc: change DAI sample_valid_bits definition
>   uapi: ipc: align SSP IPC with kernel
>   uapi: ipc: remove zero-length array for DAI IPC
>   uapi: ipc: start moving SSP-specific fields into ssp structure
>   uapi: ipc: move sample_valid_bits to SSP definitions
> 
> 

All applied.

Thanks

Liam