[Sound-open-firmware] [PATCH v2 4/7] ssp: switch dai format form PCM B mode to normal I2S mode
Liam Girdwood
liam.r.girdwood at linux.intel.com
Thu Dec 22 12:20:55 CET 2016
On Thu, 2016-12-22 at 17:27 +0800, Keyon Jie wrote:
> it is configured from host/codec side that using I2S mode, so
> switch it.
> ---
> src/ipc/intel-ipc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/src/ipc/intel-ipc.c b/src/ipc/intel-ipc.c
> index 1fdd73f..8d33830 100644
> --- a/src/ipc/intel-ipc.c
> +++ b/src/ipc/intel-ipc.c
> @@ -561,7 +561,7 @@ static uint32_t ipc_device_set_formats(uint32_t header)
>
> /* setup the DAI HW config - TODO hard coded due to IPC limitations */
> dai_dev->dai_config.mclk = config_req.clock_frequency;
> - dai_dev->dai_config.format = DAI_FMT_DSP_B | DAI_FMT_CONT |
> + dai_dev->dai_config.format = DAI_FMT_I2S | DAI_FMT_CONT |
> DAI_FMT_NB_NF | DAI_FMT_CBS_CFS;
> dai_dev->dai_config.frame_size = 32; /* TODO 16bit stereo hard coded */
> dai_dev->dai_config.bclk_fs = 32; /* 32 BCLKs per frame - */
Ok, so this is to match the existing upstream machine drivers ? We do
need to revisit this so it can be programmed at runtime.
Liam
More information about the Sound-open-firmware
mailing list