[PATCH v2 2/3] ASoC: codecs: Add support for the Renesas IDT821034 codec

Christophe Leroy christophe.leroy at csgroup.eu
Mon Jan 23 08:53:49 CET 2023



Le 20/01/2023 à 10:50, Herve Codina a écrit :
> The Renesas IDT821034 codec is four channel PCM codec with on-chip
> filters and programmable gain setting.
> It also provides SLIC (Subscriber Line Interface Circuit) signals as
> GPIOs.
> 
> Signed-off-by: Herve Codina <herve.codina at bootlin.com>
> ---
>   sound/soc/codecs/Kconfig     |   12 +
>   sound/soc/codecs/Makefile    |    2 +
>   sound/soc/codecs/idt821034.c | 1200 ++++++++++++++++++++++++++++++++++
>   3 files changed, 1214 insertions(+)
>   create mode 100644 sound/soc/codecs/idt821034.c
> 
> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> index 0f9d71490075..67489b2ebd9f 100644
> --- a/sound/soc/codecs/Kconfig
> +++ b/sound/soc/codecs/Kconfig
> @@ -107,6 +107,7 @@ config SND_SOC_ALL_CODECS
>   	imply SND_SOC_HDAC_HDMI
>   	imply SND_SOC_HDAC_HDA
>   	imply SND_SOC_ICS43432
> +	imply SND_SOC_IDT821034
>   	imply SND_SOC_INNO_RK3036
>   	imply SND_SOC_ISABELLE
>   	imply SND_SOC_JZ4740_CODEC
> @@ -972,6 +973,17 @@ config SND_SOC_HDA
>   config SND_SOC_ICS43432
>   	tristate "ICS43423 and compatible i2s microphones"
>   
> +config SND_SOC_IDT821034
> +	tristate "Renesas IDT821034 quad PCM codec"
> +	depends on SPI
> +	select REGMAP_SPI

Is selecting regmap still necessary ?

> +	help
> +	  Enable support for the Renesas IDT821034 quad PCM with
> +	  programmable gain codec.
> +
> +	  To compile this driver as a module, choose M here: the module
> +	  will be called snd-soc-idt821034.
> +
>   config SND_SOC_INNO_RK3036
>   	tristate "Inno codec driver for RK3036 SoC"
>   	select REGMAP_MMIO
> diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile
> index 71d3ce5867e4..bcf95de654fd 100644
> --- a/sound/soc/codecs/Makefile
> +++ b/sound/soc/codecs/Makefile
> @@ -111,6 +111,7 @@ snd-soc-hdac-hdmi-objs := hdac_hdmi.o
>   snd-soc-hdac-hda-objs := hdac_hda.o
>   snd-soc-hda-codec-objs := hda.o hda-dai.o
>   snd-soc-ics43432-objs := ics43432.o
> +snd-soc-idt821034-objs := idt821034.o
>   snd-soc-inno-rk3036-objs := inno_rk3036.o
>   snd-soc-isabelle-objs := isabelle.o
>   snd-soc-jz4740-codec-objs := jz4740.o
> @@ -472,6 +473,7 @@ obj-$(CONFIG_SND_SOC_HDAC_HDMI) += snd-soc-hdac-hdmi.o
>   obj-$(CONFIG_SND_SOC_HDAC_HDA) += snd-soc-hdac-hda.o
>   obj-$(CONFIG_SND_SOC_HDA) += snd-soc-hda-codec.o
>   obj-$(CONFIG_SND_SOC_ICS43432)	+= snd-soc-ics43432.o
> +obj-$(CONFIG_SND_SOC_IDT821034)	+= snd-soc-idt821034.o
>   obj-$(CONFIG_SND_SOC_INNO_RK3036)	+= snd-soc-inno-rk3036.o
>   obj-$(CONFIG_SND_SOC_ISABELLE)	+= snd-soc-isabelle.o
>   obj-$(CONFIG_SND_SOC_JZ4740_CODEC)	+= snd-soc-jz4740-codec.o
> diff --git a/sound/soc/codecs/idt821034.c b/sound/soc/codecs/idt821034.c
> new file mode 100644
> index 000000000000..5eb93fec6042
> --- /dev/null
> +++ b/sound/soc/codecs/idt821034.c
> @@ -0,0 +1,1200 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// IDT821034 ALSA SoC driver
> +//
> +// Copyright 2022 CS GROUP France
> +//
> +// Author: Herve Codina <herve.codina at bootlin.com>
> +
> +#include <linux/bitrev.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <linux/spi/spi.h>
> +#include <sound/pcm_params.h>
> +#include <sound/soc.h>
> +#include <sound/tlv.h>
> +
> +#define IDT821034_NB_CHANNEL	4
> +
> +struct idt821034_amp {
> +	u16 gain;
> +	bool is_muted;
> +};
> +
> +struct idt821034 {
> +	struct spi_device *spi;
> +	struct mutex mutex;
> +	u8 spi_tx_buf; /* Cannot use stack area for SPI (dma-safe memory) */
> +	u8 spi_rx_buf; /* Cannot use stack area for SPI (dma-safe memory) */
> +	struct {
> +		u8 codec_conf;
> +		struct {
> +			u8 power;
> +			u8 tx_slot;
> +			u8 rx_slot;
> +			u8 slic_conf;
> +			u8 slic_control;
> +		} ch[IDT821034_NB_CHANNEL];
> +	} cache;
> +	struct {
> +		struct {
> +			struct idt821034_amp amp_out;
> +			struct idt821034_amp amp_in;
> +		} ch[IDT821034_NB_CHANNEL];
> +	} amps;
> +	int max_ch_playback;
> +	int max_ch_capture;
> +	struct gpio_chip gpio_chip;
> +};
> +
> +static int idt821034_8bit_write(struct idt821034 *idt821034, u8 val)
> +{
> +	struct spi_transfer xfer[] = {
> +		{
> +			.tx_buf = &idt821034->spi_tx_buf,
> +			.len = 1,
> +		}, {
> +			.cs_off = 1,
> +			.tx_buf = &idt821034->spi_tx_buf,
> +			.len = 1,
> +		}
> +	};
> +	int ret;
> +
> +	idt821034->spi_tx_buf = val;
> +
> +	dev_vdbg(&idt821034->spi->dev, "spi xfer wr 0x%x\n", val);
> +
> +	ret = spi_sync_transfer(idt821034->spi, xfer, 2);
> +	if (ret)
> +		return ret;
> +
> +	return 0;

Looks like you could just do:

	return spi_sync_transfer(idt821034->spi, xfer, 2);

> +}
> +
> +static int idt821034_8bit_read(struct idt821034 *idt821034, u8 valw, u8 *valr)
> +{
> +	struct spi_transfer xfer[] = {
> +		{
> +			.tx_buf = &idt821034->spi_tx_buf,
> +			.rx_buf = &idt821034->spi_rx_buf,
> +			.len = 1,
> +		}, {
> +			.cs_off = 1,
> +			.tx_buf = &idt821034->spi_tx_buf,
> +			.len = 1,
> +		}
> +	};
> +	int ret;
> +
> +	idt821034->spi_tx_buf = valw;
> +
> +	ret = spi_sync_transfer(idt821034->spi, xfer, 2);
> +	if (ret)
> +		return ret;
> +
> +	*valr = idt821034->spi_rx_buf;
> +
> +	dev_vdbg(&idt821034->spi->dev, "spi xfer wr 0x%x, rd 0x%x\n",
> +		 valw, *valr);
> +
> +	return 0;
> +}
> +
> +/* Available mode the programming sequence */

s/the/for/ ?

> +#define IDT821034_MODE_CODEC(_ch) (0x80 | ((_ch) << 2))
> +#define IDT821034_MODE_SLIC(_ch)  (0xD0 | ((_ch) << 2))
> +#define IDT821034_MODE_GAIN(_ch)  (0xC0 | ((_ch) << 2))
> +
> +/* Power values that can be used in 'power' (can be ORed) */
> +#define IDT821034_CONF_PWRUP_TX		BIT(1) /* from analog input to PCM */
> +#define IDT821034_CONF_PWRUP_RX		BIT(0) /* from PCM to analog output */
> +
> +static int idt821034_set_channel_power(struct idt821034 *idt821034, u8 ch, u8 power)
> +{
> +	u8 conf;
> +	int ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "set_channel_power(%u, 0x%x)\n", ch, power);
> +
> +	conf = IDT821034_MODE_CODEC(ch) | idt821034->cache.codec_conf;
> +
> +	if (power & IDT821034_CONF_PWRUP_RX) {
> +		ret = idt821034_8bit_write(idt821034, conf | IDT821034_CONF_PWRUP_RX);
> +		if (ret)
> +			return ret;
> +		ret = idt821034_8bit_write(idt821034, idt821034->cache.ch[ch].rx_slot);
> +		if (ret)
> +			return ret;
> +	}
> +	if (power & IDT821034_CONF_PWRUP_TX) {
> +		ret = idt821034_8bit_write(idt821034, conf | IDT821034_CONF_PWRUP_TX);
> +		if (ret)
> +			return ret;
> +		ret = idt821034_8bit_write(idt821034, idt821034->cache.ch[ch].tx_slot);
> +		if (ret)
> +			return ret;
> +	}
> +	if (!(power & (IDT821034_CONF_PWRUP_TX | IDT821034_CONF_PWRUP_RX))) {
> +		ret = idt821034_8bit_write(idt821034, conf);
> +		if (ret)
> +			return ret;
> +		ret = idt821034_8bit_write(idt821034, 0x00);
> +		if (ret)
> +			return ret;
> +	}

Can we refactor the three actions with an helper, that could also be 
reused for idt821034_set_codec_conf() and idt821034_set_channel_ts() and 
idt821034_set_slic_conf() and idt821034_write_slic_raw() and 
idt821034_set_gain_channel, something like for instance:

static int idt821034_set_conf(struct idt821034 *idt821034, u8 conf, u8 val)
{
	ret = idt821034_8bit_write(idt821034, conf);
	if (ret)
		return ret;
	return idt821034_8bit_write(idt821034, val);
}

> +
> +	idt821034->cache.ch[ch].power = power;
> +
> +	return 0;
> +}
> +
> +static u8 idt821034_get_channel_power(struct idt821034 *idt821034, u8 ch)
> +{
> +	return idt821034->cache.ch[ch].power;
> +}
> +
> +/* Codec configuration values that can be used in 'codec_conf' (can be ORed) */
> +#define IDT821034_CONF_ALAW_MODE	BIT(5)
> +#define IDT821034_CONF_DELAY_MODE	BIT(4)
> +
> +static int idt821034_set_codec_conf(struct idt821034 *idt821034, u8 codec_conf)
> +{
> +	u8 conf;
> +	u8 ts;
> +	int ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "set_codec_conf(0x%x)\n", codec_conf);
> +
> +	/* codec conf fields are common to all channel.
> +	 * Arbitrary use of channel 0 for this configuration.
> +	 */
> +
> +	/* Set Configuration Register */
> +	conf = IDT821034_MODE_CODEC(0) | codec_conf;
> +
> +	/* Update conf value and timeslot register value according
> +	 * to cache values
> +	 */
> +	if (idt821034->cache.ch[0].power & IDT821034_CONF_PWRUP_RX) {
> +		conf |= IDT821034_CONF_PWRUP_RX;
> +		ts = idt821034->cache.ch[0].rx_slot;
> +	} else if (idt821034->cache.ch[0].power & IDT821034_CONF_PWRUP_TX) {
> +		conf |= IDT821034_CONF_PWRUP_TX;
> +		ts = idt821034->cache.ch[0].tx_slot;
> +	} else {
> +		ts = 0x00;
> +	}
> +
> +	/* Write configuration register and time-slot register */
> +	ret = idt821034_8bit_write(idt821034, conf);
> +	if (ret)
> +		return ret;
> +	ret = idt821034_8bit_write(idt821034, ts);
> +	if (ret)
> +		return ret;
> +
> +	idt821034->cache.codec_conf = codec_conf;
> +	return 0;
> +}
> +
> +static u8 idt821034_get_codec_conf(struct idt821034 *idt821034)
> +{
> +	return idt821034->cache.codec_conf;
> +}
> +
> +/* Channel direction values that can be used in 'ch_dir' (can be ORed) */
> +#define IDT821034_CH_RX		BIT(0) /* from PCM to analog output */
> +#define IDT821034_CH_TX		BIT(1) /* from analog input to PCM */
> +
> +static int idt821034_set_channel_ts(struct idt821034 *idt821034, u8 ch, u8 ch_dir, u8 ts_num)
> +{
> +	u8 conf;
> +	int ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "set_channel_ts(%u, 0x%x, %d)\n", ch, ch_dir, ts_num);
> +
> +	conf = IDT821034_MODE_CODEC(ch) | idt821034->cache.codec_conf;
> +
> +	if (ch_dir & IDT821034_CH_RX) {
> +		if (idt821034->cache.ch[ch].power & IDT821034_CONF_PWRUP_RX) {
> +			ret = idt821034_8bit_write(idt821034, conf | IDT821034_CONF_PWRUP_RX);
> +			if (ret)
> +				return ret;
> +			ret = idt821034_8bit_write(idt821034, ts_num);
> +			if (ret)
> +				return ret;
> +		}
> +		idt821034->cache.ch[ch].rx_slot = ts_num;
> +	}
> +	if (ch_dir & IDT821034_CH_TX) {
> +		if (idt821034->cache.ch[ch].power & IDT821034_CONF_PWRUP_TX) {
> +			ret = idt821034_8bit_write(idt821034, conf | IDT821034_CONF_PWRUP_TX);
> +			if (ret)
> +				return ret;
> +			ret = idt821034_8bit_write(idt821034, ts_num);
> +			if (ret)
> +				return ret;
> +		}
> +		idt821034->cache.ch[ch].tx_slot = ts_num;
> +	}
> +
> +	return 0;
> +}
> +
> +/* SLIC direction values that can be used in 'slic_dir' (can be ORed) */
> +#define IDT821034_SLIC_IO1_IN       BIT(1)
> +#define IDT821034_SLIC_IO0_IN       BIT(0)
> +
> +static int idt821034_set_slic_conf(struct idt821034 *idt821034, u8 ch, u8 slic_dir)
> +{
> +	u8 conf;
> +	int ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "set_slic_conf(%u, 0x%x)\n", ch, slic_dir);
> +
> +	conf = IDT821034_MODE_SLIC(ch) | slic_dir;
> +	ret = idt821034_8bit_write(idt821034, conf);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_8bit_write(idt821034, idt821034->cache.ch[ch].slic_control);
> +	if (ret)
> +		return ret;
> +
> +	idt821034->cache.ch[ch].slic_conf = slic_dir;
> +
> +	return 0;
> +}
> +
> +static u8 idt821034_get_slic_conf(struct idt821034 *idt821034, u8 ch)
> +{
> +	return idt821034->cache.ch[ch].slic_conf;
> +}
> +
> +static int idt821034_write_slic_raw(struct idt821034 *idt821034, u8 ch, u8 slic_raw)
> +{
> +	u8 conf;
> +	int ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "write_slic_raw(%u, 0x%x)\n", ch, slic_raw);
> +
> +	/*
> +	 * On write, slic_raw is mapped as follow :
> +	 *   b4: O_4
> +	 *   b3: O_3
> +	 *   b2: O_2
> +	 *   b1: I/O_1
> +	 *   b0: I/O_0
> +	 */
> +
> +	conf = IDT821034_MODE_SLIC(ch) | idt821034->cache.ch[ch].slic_conf;
> +	ret = idt821034_8bit_write(idt821034, conf);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_8bit_write(idt821034, slic_raw);
> +	if (ret)
> +		return ret;
> +
> +	idt821034->cache.ch[ch].slic_control = slic_raw;
> +	return 0;
> +}
> +
> +static u8 idt821034_get_written_slic_raw(struct idt821034 *idt821034, u8 ch)
> +{
> +	return idt821034->cache.ch[ch].slic_control;
> +}
> +
> +static int idt821034_read_slic_raw(struct idt821034 *idt821034, u8 ch, u8 *slic_raw)
> +{
> +	u8 val;
> +	int ret;
> +
> +	/*
> +	 * On read, slic_raw is mapped as follow :
> +	 *   b7: I/O_0
> +	 *   b6: I/O_1
> +	 *   b5: O_2
> +	 *   b4: O_3
> +	 *   b3: O_4
> +	 *   b2: I/O1_0, I/O_0 from channel 1 (no matter ch value)
> +	 *   b1: I/O2_0, I/O_0 from channel 2 (no matter ch value)
> +	 *   b2: I/O3_0, I/O_0 from channel 3 (no matter ch value)
> +	 */
> +
> +	val = IDT821034_MODE_SLIC(ch) | idt821034->cache.ch[ch].slic_conf;
> +	ret = idt821034_8bit_write(idt821034, val);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_8bit_read(idt821034, idt821034->cache.ch[ch].slic_control, slic_raw);
> +	if (ret)
> +		return ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "read_slic_raw(%i) 0x%x\n", ch, *slic_raw);
> +
> +	return 0;
> +}
> +
> +/* Gain type values that can be used in 'gain_type' (cannot be ORed) */
> +#define IDT821034_GAIN_RX		(0 << 1) /* from PCM to analog output */
> +#define IDT821034_GAIN_TX		(1 << 1) /* from analog input to PCM */
> +
> +static int idt821034_set_gain_channel(struct idt821034 *idt821034, u8 ch,
> +				      u8 gain_type, u16 gain_val)
> +{
> +	u8 conf;
> +	int ret;
> +
> +	dev_dbg(&idt821034->spi->dev, "set_gain_channel(%u, 0x%x, 0x%x-%d)\n",
> +		ch, gain_type, gain_val, gain_val);
> +
> +	/*
> +	 * The gain programming coefficients should be calculated as:
> +	 *   Transmit : Coeff_X = round [ gain_X0dB × gain_X ]
> +	 *   Receive: Coeff_R = round [ gain_R0dB × gain_R ]
> +	 * where:
> +	 *   gain_X0dB = 1820;
> +	 *   gain_X is the target gain;
> +	 *   Coeff_X should be in the range of 0 to 8192.
> +	 *   gain_R0dB = 2506;
> +	 *   gain_R is the target gain;
> +	 *   Coeff_R should be in the range of 0 to 8192.
> +	 *
> +	 * A gain programming coefficient is 14-bit wide and in binary format.
> +	 * The 7 Most Significant Bits of the coefficient is called
> +	 * GA_MSB_Transmit for transmit path, or is called GA_MSB_Receive for
> +	 * receive path; The 7 Least Significant Bits of the coefficient is
> +	 * called GA_LSB_ Transmit for transmit path, or is called
> +	 * GA_LSB_Receive for receive path.
> +	 *
> +	 * An example is given below to clarify the calculation of the
> +	 * coefficient. To program a +3 dB gain in transmit path and a -3.5 dB
> +	 * gain in receive path:
> +	 *
> +	 * Linear Code of +3dB = 10^(3/20)= 1.412537545
> +	 * Coeff_X = round (1820 × 1.412537545) = 2571
> +	 *                                      = 0b001010_00001011
> +	 * GA_MSB_Transmit = 0b0010100
> +	 * GA_LSB_Transmit = 0b0001011
> +	 *
> +	 * Linear Code of -3.5dB = 10^(-3.5/20) = 0.668343917
> +	 * Coeff_R= round (2506 × 0.668343917) = 1675
> +	 *                                     = 0b0001101_0001011
> +	 * GA_MSB_Receive = 0b0001101
> +	 * GA_LSB_Receive = 0b0001011
> +	 */
> +
> +	conf = IDT821034_MODE_GAIN(ch) | gain_type;
> +
> +	ret = idt821034_8bit_write(idt821034, conf | 0x00);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_8bit_write(idt821034, gain_val & 0x007F);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_8bit_write(idt821034, conf | 0x01);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_8bit_write(idt821034, (gain_val >> 7) & 0x7F);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +/* Id helpers used in controls and dapm */
> +#define IDT821034_DIR_OUT (1 << 3)
> +#define IDT821034_DIR_IN  (0 << 3)
> +#define IDT821034_ID(_ch, _dir) (((_ch) & 0x03) | (_dir))
> +#define IDT821034_ID_OUT(_ch) IDT821034_ID(_ch, IDT821034_DIR_OUT)
> +#define IDT821034_ID_IN(_ch)  IDT821034_ID(_ch, IDT821034_DIR_IN)
> +
> +#define IDT821034_ID_GET_CHAN(_id) ((_id) & 0x03)
> +#define IDT821034_ID_GET_DIR(_id) ((_id) & (1 << 3))
> +#define IDT821034_ID_IS_OUT(_id) (IDT821034_ID_GET_DIR(_id) == IDT821034_DIR_OUT)
> +
> +static int idt821034_kctrl_gain_get(struct snd_kcontrol *kcontrol,
> +				    struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value;
> +	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(component);
> +	int min = mc->min;
> +	int max = mc->max;
> +	unsigned int mask = (1 << fls(max)) - 1;
> +	unsigned int invert = mc->invert;
> +	int val;
> +	u8 ch;
> +
> +	ch = IDT821034_ID_GET_CHAN(mc->reg);
> +
> +	mutex_lock(&idt821034->mutex);
> +	if (IDT821034_ID_IS_OUT(mc->reg))
> +		val = idt821034->amps.ch[ch].amp_out.gain;
> +	else
> +		val = idt821034->amps.ch[ch].amp_in.gain;
> +	mutex_unlock(&idt821034->mutex);
> +
> +	ucontrol->value.integer.value[0] = val & mask;
> +	if (invert)
> +		ucontrol->value.integer.value[0] = max - ucontrol->value.integer.value[0];
> +	else
> +		ucontrol->value.integer.value[0] = ucontrol->value.integer.value[0] - min;
> +
> +	return 0;
> +}
> +
> +static int idt821034_kctrl_gain_put(struct snd_kcontrol *kcontrol,
> +				    struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value;
> +	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(component);
> +	struct idt821034_amp *amp;
> +	int min = mc->min;
> +	int max = mc->max;
> +	unsigned int mask = (1 << fls(max)) - 1;
> +	unsigned int invert = mc->invert;
> +	unsigned int val;
> +	int ret;
> +	u8 gain_type;
> +	u8 ch;
> +
> +	val = ucontrol->value.integer.value[0];
> +	if (val < 0)
> +		return -EINVAL;
> +	if (val > max - min)
> +		return -EINVAL;
> +
> +	if (invert)
> +		val = (max - val) & mask;
> +	else
> +		val = (val + min) & mask;
> +
> +	ch = IDT821034_ID_GET_CHAN(mc->reg);
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	if (IDT821034_ID_IS_OUT(mc->reg)) {
> +		amp = &idt821034->amps.ch[ch].amp_out;
> +		gain_type = IDT821034_GAIN_RX;
> +	} else {
> +		amp = &idt821034->amps.ch[ch].amp_in;
> +		gain_type = IDT821034_GAIN_TX;
> +	}
> +
> +	if (!amp->is_muted) {
> +		ret = idt821034_set_gain_channel(idt821034, ch, gain_type, val);
> +		if (ret)
> +			goto end;
> +	}
> +
> +	amp->gain = val;
> +	ret = 0;
> +end:
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static int idt821034_kctrl_mute_get(struct snd_kcontrol *kcontrol,
> +				    struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(component);
> +	int id = kcontrol->private_value;
> +	bool is_muted;
> +	u8 ch;
> +
> +	ch = IDT821034_ID_GET_CHAN(id);
> +
> +	mutex_lock(&idt821034->mutex);
> +	is_muted = IDT821034_ID_IS_OUT(id) ?
> +			idt821034->amps.ch[ch].amp_out.is_muted:
> +			idt821034->amps.ch[ch].amp_in.is_muted;
> +	mutex_unlock(&idt821034->mutex);
> +
> +	ucontrol->value.integer.value[0] = !is_muted;
> +
> +	return 0;
> +}
> +
> +static int idt821034_kctrl_mute_put(struct snd_kcontrol *kcontrol,
> +				    struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(component);
> +	int id = kcontrol->private_value;
> +	struct idt821034_amp *amp;
> +	bool is_mute;
> +	u8 gain_type;
> +	int ret;
> +	u8 ch;
> +
> +	ch = IDT821034_ID_GET_CHAN(id);
> +	is_mute = !ucontrol->value.integer.value[0];
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	if (IDT821034_ID_IS_OUT(id)) {
> +		amp = &idt821034->amps.ch[ch].amp_out;
> +		gain_type = IDT821034_GAIN_RX;
> +	} else {
> +		amp = &idt821034->amps.ch[ch].amp_in;
> +		gain_type = IDT821034_GAIN_TX;
> +	}
> +
> +	ret = idt821034_set_gain_channel(idt821034, ch, gain_type,
> +					 is_mute ? 0 : amp->gain);
> +	if (ret)
> +		goto end;
> +
> +	amp->is_muted = is_mute;
> +
> +	ret = 0;
> +end:
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static const DECLARE_TLV_DB_LINEAR(idt821034_gain_in, -6520, 1306);
> +#define IDT821034_GAIN_IN_MIN_RAW	1 /* -65.20 dB -> 10^(-65.2/20.0) * 1820 = 1 */
> +#define IDT821034_GAIN_IN_MAX_RAW	8191 /* 13.06 dB -> 10^(13.06/20.0) * 1820 = 8191 */
> +#define IDT821034_GAIN_IN_INIT_RAW	1820 /* 0dB -> 10^(0/20) * 1820 = 1820 */
> +
> +static const DECLARE_TLV_DB_LINEAR(idt821034_gain_out, -6798, 1029);
> +#define IDT821034_GAIN_OUT_MIN_RAW	1 /* -67.98 dB -> 10^(-67.98/20.0) * 2506 = 1*/
> +#define IDT821034_GAIN_OUT_MAX_RAW	8191 /* 10.29 dB -> 10^(10.29/20.0) * 2506 = 8191 */
> +#define IDT821034_GAIN_OUT_INIT_RAW	2506 /* 0dB -> 10^(0/20) * 2506 = 2506 */
> +
> +static const struct snd_kcontrol_new idt821034_controls[] = {
> +	/* DAC volume control */
> +	SOC_SINGLE_RANGE_EXT_TLV("DAC0 Playback Volume", IDT821034_ID_OUT(0), 0,
> +				 IDT821034_GAIN_OUT_MIN_RAW, IDT821034_GAIN_OUT_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_out),
> +	SOC_SINGLE_RANGE_EXT_TLV("DAC1 Playback Volume", IDT821034_ID_OUT(1), 0,
> +				 IDT821034_GAIN_OUT_MIN_RAW, IDT821034_GAIN_OUT_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_out),
> +	SOC_SINGLE_RANGE_EXT_TLV("DAC2 Playback Volume", IDT821034_ID_OUT(2), 0,
> +				 IDT821034_GAIN_OUT_MIN_RAW, IDT821034_GAIN_OUT_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_out),
> +	SOC_SINGLE_RANGE_EXT_TLV("DAC3 Playback Volume", IDT821034_ID_OUT(3), 0,
> +				 IDT821034_GAIN_OUT_MIN_RAW, IDT821034_GAIN_OUT_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_out),
> +
> +	/* DAC mute control */
> +	SOC_SINGLE_BOOL_EXT("DAC0 Playback Switch", IDT821034_ID_OUT(0),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +	SOC_SINGLE_BOOL_EXT("DAC1 Playback Switch", IDT821034_ID_OUT(1),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +	SOC_SINGLE_BOOL_EXT("DAC2 Playback Switch", IDT821034_ID_OUT(2),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +	SOC_SINGLE_BOOL_EXT("DAC3 Playback Switch", IDT821034_ID_OUT(3),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +
> +	/* ADC volume control */
> +	SOC_SINGLE_RANGE_EXT_TLV("ADC0 Capture Volume", IDT821034_ID_IN(0), 0,
> +				 IDT821034_GAIN_IN_MIN_RAW, IDT821034_GAIN_IN_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_in),
> +	SOC_SINGLE_RANGE_EXT_TLV("ADC1 Capture Volume", IDT821034_ID_IN(1), 0,
> +				 IDT821034_GAIN_IN_MIN_RAW, IDT821034_GAIN_IN_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_in),
> +	SOC_SINGLE_RANGE_EXT_TLV("ADC2 Capture Volume", IDT821034_ID_IN(2), 0,
> +				 IDT821034_GAIN_IN_MIN_RAW, IDT821034_GAIN_IN_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_in),
> +	SOC_SINGLE_RANGE_EXT_TLV("ADC3 Capture Volume", IDT821034_ID_IN(3), 0,
> +				 IDT821034_GAIN_IN_MIN_RAW, IDT821034_GAIN_IN_MAX_RAW,
> +				 0, idt821034_kctrl_gain_get, idt821034_kctrl_gain_put,
> +				 idt821034_gain_in),
> +
> +	/* ADC mute control */
> +	SOC_SINGLE_BOOL_EXT("ADC0 Capture Switch", IDT821034_ID_IN(0),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +	SOC_SINGLE_BOOL_EXT("ADC1 Capture Switch", IDT821034_ID_IN(1),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +	SOC_SINGLE_BOOL_EXT("ADC2 Capture Switch", IDT821034_ID_IN(2),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +	SOC_SINGLE_BOOL_EXT("ADC3 Capture Switch", IDT821034_ID_IN(3),
> +			    idt821034_kctrl_mute_get, idt821034_kctrl_mute_put),
> +};
> +
> +static int idt821034_power_event(struct snd_soc_dapm_widget *w,
> +				 struct snd_kcontrol *kcontrol, int event)
> +{
> +	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(component);
> +	unsigned int id = w->shift;
> +	u8 power, mask;
> +	int ret;
> +	u8 ch;
> +
> +	ch = IDT821034_ID_GET_CHAN(id);
> +	mask = IDT821034_ID_IS_OUT(id) ? IDT821034_CONF_PWRUP_RX : IDT821034_CONF_PWRUP_TX;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	power = idt821034_get_channel_power(idt821034, ch);
> +	if (SND_SOC_DAPM_EVENT_ON(event))
> +		power |= mask;
> +	else
> +		power &= ~mask;
> +	ret = idt821034_set_channel_power(idt821034, ch, power);
> +
> +	mutex_unlock(&idt821034->mutex);
> +
> +	return ret;
> +}
> +
> +static const struct snd_soc_dapm_widget idt821034_dapm_widgets[] = {
> +	SND_SOC_DAPM_DAC_E("DAC0", "Playback", SND_SOC_NOPM, IDT821034_ID_OUT(0), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_DAC_E("DAC1", "Playback", SND_SOC_NOPM, IDT821034_ID_OUT(1), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_DAC_E("DAC2", "Playback", SND_SOC_NOPM, IDT821034_ID_OUT(2), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_DAC_E("DAC3", "Playback", SND_SOC_NOPM, IDT821034_ID_OUT(3), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +
> +	SND_SOC_DAPM_OUTPUT("OUT0"),
> +	SND_SOC_DAPM_OUTPUT("OUT1"),
> +	SND_SOC_DAPM_OUTPUT("OUT2"),
> +	SND_SOC_DAPM_OUTPUT("OUT3"),
> +
> +	SND_SOC_DAPM_DAC_E("ADC0", "Capture", SND_SOC_NOPM, IDT821034_ID_IN(0), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_DAC_E("ADC1", "Capture", SND_SOC_NOPM, IDT821034_ID_IN(1), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_DAC_E("ADC2", "Capture", SND_SOC_NOPM, IDT821034_ID_IN(2), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +	SND_SOC_DAPM_DAC_E("ADC3", "Capture", SND_SOC_NOPM, IDT821034_ID_IN(3), 0,
> +			   idt821034_power_event,
> +			   SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
> +
> +	SND_SOC_DAPM_INPUT("IN0"),
> +	SND_SOC_DAPM_INPUT("IN1"),
> +	SND_SOC_DAPM_INPUT("IN2"),
> +	SND_SOC_DAPM_INPUT("IN3"),
> +};
> +
> +static const struct snd_soc_dapm_route idt821034_dapm_routes[] = {
> +	{ "OUT0", NULL, "DAC0" },
> +	{ "OUT1", NULL, "DAC1" },
> +	{ "OUT2", NULL, "DAC2" },
> +	{ "OUT3", NULL, "DAC3" },
> +
> +	{ "ADC0", NULL, "IN0" },
> +	{ "ADC1", NULL, "IN1" },
> +	{ "ADC2", NULL, "IN2" },
> +	{ "ADC3", NULL, "IN3" },
> +};
> +
> +static int idt821034_dai_set_tdm_slot(struct snd_soc_dai *dai,
> +				      unsigned int tx_mask, unsigned int rx_mask,
> +				      int slots, int width)
> +{
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(dai->component);
> +	unsigned int mask;
> +	u8 slot;
> +	int ret;
> +	u8 ch;
> +
> +	switch (width) {
> +	case 0: /* Not set -> default 8 */
> +	case 8:
> +		break;
> +	default:
> +		dev_err(dai->dev, "tdm slot width %d not supported\n", width);
> +		return -EINVAL;
> +	}
> +
> +	mask = tx_mask;
> +	slot = 0;
> +	ch = 0;
> +	while (mask && ch < IDT821034_NB_CHANNEL) {
> +		if (mask & 0x1) {
> +			mutex_lock(&idt821034->mutex);
> +			ret = idt821034_set_channel_ts(idt821034, ch, IDT821034_CH_RX, slot);
> +			mutex_unlock(&idt821034->mutex);
> +			if (ret) {
> +				dev_err(dai->dev, "ch%u set tx tdm slot failed (%d)\n",
> +					ch, ret);
> +				return ret;
> +			}
> +			ch++;
> +		}
> +		mask >>= 1;
> +		slot++;
> +	}
> +	if (mask) {
> +		dev_err(dai->dev, "too much tx slots defined (mask = 0x%x) support max %d\n",
> +			tx_mask, IDT821034_NB_CHANNEL);
> +		return -EINVAL;
> +	}
> +	idt821034->max_ch_playback = ch;
> +
> +	mask = rx_mask;
> +	slot = 0;
> +	ch = 0;
> +	while (mask && ch < IDT821034_NB_CHANNEL) {
> +		if (mask & 0x1) {
> +			mutex_lock(&idt821034->mutex);
> +			ret = idt821034_set_channel_ts(idt821034, ch, IDT821034_CH_TX, slot);
> +			mutex_unlock(&idt821034->mutex);
> +			if (ret) {
> +				dev_err(dai->dev, "ch%u set rx tdm slot failed (%d)\n",
> +					ch, ret);
> +				return ret;
> +			}
> +			ch++;
> +		}
> +		mask >>= 1;
> +		slot++;
> +	}
> +	if (mask) {
> +		dev_err(dai->dev, "too much rx slots defined (mask = 0x%x) support max %d\n",
> +			rx_mask, IDT821034_NB_CHANNEL);
> +		return -EINVAL;
> +	}
> +	idt821034->max_ch_capture = ch;
> +
> +	return 0;
> +}
> +
> +static int idt821034_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
> +{
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(dai->component);
> +	u8 conf;
> +	int ret;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	conf = idt821034_get_codec_conf(idt821034);
> +
> +	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
> +	case SND_SOC_DAIFMT_DSP_A:
> +		conf |= IDT821034_CONF_DELAY_MODE;
> +		break;
> +	case SND_SOC_DAIFMT_DSP_B:
> +		conf &= ~IDT821034_CONF_DELAY_MODE;
> +		break;
> +	default:
> +		dev_err(dai->dev, "Unsupported DAI format 0x%x\n",
> +			fmt & SND_SOC_DAIFMT_FORMAT_MASK);
> +		ret = -EINVAL;
> +		goto end;
> +	}
> +	ret = idt821034_set_codec_conf(idt821034, conf);
> +end:
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static int idt821034_dai_hw_params(struct snd_pcm_substream *substream,
> +				   struct snd_pcm_hw_params *params,
> +				   struct snd_soc_dai *dai)
> +{
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(dai->component);
> +	u8 conf;
> +	int ret;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	conf = idt821034_get_codec_conf(idt821034);
> +
> +	switch (params_format(params)) {
> +	case SNDRV_PCM_FORMAT_A_LAW:
> +		conf |= IDT821034_CONF_ALAW_MODE;
> +		break;
> +	case SNDRV_PCM_FORMAT_MU_LAW:
> +		conf &= ~IDT821034_CONF_ALAW_MODE;
> +		break;
> +	default:
> +		dev_err(dai->dev, "Unsupported PCM format 0x%x\n",
> +			params_format(params));
> +		ret = -EINVAL;
> +		goto end;
> +	}
> +	ret = idt821034_set_codec_conf(idt821034, conf);
> +end:
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static const unsigned int idt821034_sample_bits[] = {8};
> +
> +static struct snd_pcm_hw_constraint_list idt821034_sample_bits_constr = {
> +	.list = idt821034_sample_bits,
> +	.count = ARRAY_SIZE(idt821034_sample_bits),
> +};
> +
> +static int idt821034_dai_startup(struct snd_pcm_substream *substream,
> +				 struct snd_soc_dai *dai)
> +{
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(dai->component);
> +	unsigned int max_ch = 0;
> +	int ret;
> +
> +	max_ch = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
> +		idt821034->max_ch_playback : idt821034->max_ch_capture;
> +
> +	/*
> +	 * Disable stream support (min = 0, max = 0) if no timeslots were
> +	 * configured otherwise, limit the number of channels to those
> +	 * configured.
> +	 */
> +	ret = snd_pcm_hw_constraint_minmax(substream->runtime, SNDRV_PCM_HW_PARAM_CHANNELS,
> +					   max_ch ? 1 : 0, max_ch);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = snd_pcm_hw_constraint_list(substream->runtime, 0, SNDRV_PCM_HW_PARAM_SAMPLE_BITS,
> +					 &idt821034_sample_bits_constr);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static u64 idt821034_dai_formats[] = {
> +	SND_SOC_POSSIBLE_DAIFMT_DSP_A	|
> +	SND_SOC_POSSIBLE_DAIFMT_DSP_B,
> +};
> +
> +static const struct snd_soc_dai_ops idt821034_dai_ops = {
> +	.startup      = idt821034_dai_startup,
> +	.hw_params    = idt821034_dai_hw_params,
> +	.set_tdm_slot = idt821034_dai_set_tdm_slot,
> +	.set_fmt      = idt821034_dai_set_fmt,
> +	.auto_selectable_formats     = idt821034_dai_formats,
> +	.num_auto_selectable_formats = ARRAY_SIZE(idt821034_dai_formats),
> +};
> +
> +static struct snd_soc_dai_driver idt821034_dai_driver = {
> +	.name = "idt821034",
> +	.playback = {
> +		.stream_name = "Playback",
> +		.channels_min = 1,
> +		.channels_max = IDT821034_NB_CHANNEL,
> +		.rates = SNDRV_PCM_RATE_8000,
> +		.formats = SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW,
> +	},
> +	.capture = {
> +		.stream_name = "Capture",
> +		.channels_min = 1,
> +		.channels_max = IDT821034_NB_CHANNEL,
> +		.rates = SNDRV_PCM_RATE_8000,
> +		.formats = SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW,
> +	},
> +	.ops = &idt821034_dai_ops,
> +};
> +
> +static int idt821034_reset_audio(struct idt821034 *idt821034)
> +{
> +	int ret;
> +	u8 i;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	ret = idt821034_set_codec_conf(idt821034, 0);
> +	if (ret)
> +		goto end;
> +
> +	for (i = 0; i < IDT821034_NB_CHANNEL; i++) {
> +		idt821034->amps.ch[i].amp_out.gain = IDT821034_GAIN_OUT_INIT_RAW;
> +		idt821034->amps.ch[i].amp_out.is_muted = false;
> +		ret = idt821034_set_gain_channel(idt821034, i, IDT821034_GAIN_RX,
> +						 idt821034->amps.ch[i].amp_out.gain);
> +		if (ret)
> +			goto end;
> +
> +		idt821034->amps.ch[i].amp_in.gain = IDT821034_GAIN_IN_INIT_RAW;
> +		idt821034->amps.ch[i].amp_in.is_muted = false;
> +		ret = idt821034_set_gain_channel(idt821034, i, IDT821034_GAIN_TX,
> +						 idt821034->amps.ch[i].amp_in.gain);
> +		if (ret)
> +			goto end;
> +
> +		ret = idt821034_set_channel_power(idt821034, i, 0);
> +		if (ret)
> +			goto end;
> +	}
> +
> +	ret = 0;
> +end:
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static int idt821034_component_probe(struct snd_soc_component *component)
> +{
> +	struct idt821034 *idt821034 = snd_soc_component_get_drvdata(component);
> +	int ret;
> +
> +	/* reset idt821034 audio part*/
> +	ret = idt821034_reset_audio(idt821034);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static const struct snd_soc_component_driver idt821034_component_driver = {
> +	.probe			= idt821034_component_probe,
> +	.controls		= idt821034_controls,
> +	.num_controls		= ARRAY_SIZE(idt821034_controls),
> +	.dapm_widgets		= idt821034_dapm_widgets,
> +	.num_dapm_widgets	= ARRAY_SIZE(idt821034_dapm_widgets),
> +	.dapm_routes		= idt821034_dapm_routes,
> +	.num_dapm_routes	= ARRAY_SIZE(idt821034_dapm_routes),
> +	.endianness		= 1,
> +};
> +
> +#if IS_ENABLED(CONFIG_GPIOLIB)

#ifdef CONFIG_GPIOLIB ?

Is that #if section needed at all ? Isn't it possible to have it all the 
time and check IS_ENABLED(CONFIG_GPIOLIB) in the probe before calling 
the init ? Something like :

         if (IS_ENABLED(CONFIG_GPIOLIB))
		return idt821034_gpio_init(idt821034);
	return 0;

> +#define IDT821034_GPIO_OFFSET_TO_SLIC_CHANNEL(_offset) (((_offset) / 5) % 4)
> +#define IDT821034_GPIO_OFFSET_TO_SLIC_MASK(_offset)    BIT((_offset) % 5)
> +
> +static void idt821034_chip_gpio_set(struct gpio_chip *c, unsigned int offset, int val)
> +{
> +	u8 ch = IDT821034_GPIO_OFFSET_TO_SLIC_CHANNEL(offset);
> +	u8 mask = IDT821034_GPIO_OFFSET_TO_SLIC_MASK(offset);
> +	struct idt821034 *idt821034 = gpiochip_get_data(c);
> +	u8 slic_raw;
> +	int ret;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	slic_raw = idt821034_get_written_slic_raw(idt821034, ch);
> +	if (val)
> +		slic_raw |= mask;
> +	else
> +		slic_raw &= ~mask;
> +	ret = idt821034_write_slic_raw(idt821034, ch, slic_raw);
> +	if (ret) {
> +		dev_err(&idt821034->spi->dev, "set gpio %d (%u, 0x%x) failed (%d)\n",
> +			offset, ch, mask, ret);
> +	}
> +
> +	mutex_unlock(&idt821034->mutex);
> +}
> +
> +static int idt821034_chip_gpio_get(struct gpio_chip *c, unsigned int offset)
> +{
> +	u8 ch = IDT821034_GPIO_OFFSET_TO_SLIC_CHANNEL(offset);
> +	u8 mask = IDT821034_GPIO_OFFSET_TO_SLIC_MASK(offset);
> +	struct idt821034 *idt821034 = gpiochip_get_data(c);
> +	u8 slic_raw;
> +	int ret;
> +
> +	mutex_lock(&idt821034->mutex);
> +	ret = idt821034_read_slic_raw(idt821034, ch, &slic_raw);
> +	mutex_unlock(&idt821034->mutex);
> +	if (ret) {
> +		dev_err(&idt821034->spi->dev, "get gpio %d (%u, 0x%x) failed (%d)\n",
> +			offset, ch, mask, ret);
> +		return ret;
> +	}
> +
> +	/*
> +	 * SLIC IOs are read in reverse order compared to write.
> +	 * Reverse the read value here in order to have IO0 at lsb (ie same
> +	 * order as write)
> +	 */
> +	return !!(bitrev8(slic_raw) & mask);
> +}
> +
> +static int idt821034_chip_get_direction(struct gpio_chip *c, unsigned int offset)
> +{
> +	u8 ch = IDT821034_GPIO_OFFSET_TO_SLIC_CHANNEL(offset);
> +	u8 mask = IDT821034_GPIO_OFFSET_TO_SLIC_MASK(offset);
> +	struct idt821034 *idt821034 = gpiochip_get_data(c);
> +	u8 slic_dir;
> +
> +	mutex_lock(&idt821034->mutex);
> +	slic_dir = idt821034_get_slic_conf(idt821034, ch);
> +	mutex_unlock(&idt821034->mutex);
> +
> +	return slic_dir & mask ? GPIO_LINE_DIRECTION_IN : GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int idt821034_chip_direction_input(struct gpio_chip *c, unsigned int offset)
> +{
> +	u8 ch = IDT821034_GPIO_OFFSET_TO_SLIC_CHANNEL(offset);
> +	u8 mask = IDT821034_GPIO_OFFSET_TO_SLIC_MASK(offset);
> +	struct idt821034 *idt821034 = gpiochip_get_data(c);
> +	u8 slic_conf;
> +	int ret;
> +
> +	/* Only IO0 and IO1 can be set as input */
> +	if (mask & ~(IDT821034_SLIC_IO1_IN | IDT821034_SLIC_IO0_IN))
> +		return -EPERM;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	slic_conf = idt821034_get_slic_conf(idt821034, ch) | mask;
> +
> +	ret = idt821034_set_slic_conf(idt821034, ch, slic_conf);
> +	if (ret) {
> +		dev_err(&idt821034->spi->dev, "dir in gpio %d (%u, 0x%x) failed (%d)\n",
> +			offset, ch, mask, ret);
> +	}
> +
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static int idt821034_chip_direction_output(struct gpio_chip *c, unsigned int offset, int val)
> +{
> +	u8 ch = IDT821034_GPIO_OFFSET_TO_SLIC_CHANNEL(offset);
> +	u8 mask = IDT821034_GPIO_OFFSET_TO_SLIC_MASK(offset);
> +	struct idt821034 *idt821034 = gpiochip_get_data(c);
> +	u8 slic_conf;
> +	int ret;
> +
> +	idt821034_chip_gpio_set(c, offset, val);
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	slic_conf = idt821034_get_slic_conf(idt821034, ch) & ~mask;
> +
> +	ret = idt821034_set_slic_conf(idt821034, ch, slic_conf);
> +	if (ret) {
> +		dev_err(&idt821034->spi->dev, "dir in gpio %d (%u, 0x%x) failed (%d)\n",
> +			offset, ch, mask, ret);
> +	}
> +
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static int idt821034_reset_gpio(struct idt821034 *idt821034)
> +{
> +	int ret;
> +	u8 i;
> +
> +	mutex_lock(&idt821034->mutex);
> +
> +	/* IO0 and IO1 as input for all channels and output IO set to 0 */
> +	for (i = 0; i < IDT821034_NB_CHANNEL; i++) {
> +		ret = idt821034_set_slic_conf(idt821034, i,
> +					      IDT821034_SLIC_IO1_IN | IDT821034_SLIC_IO0_IN);
> +		if (ret)
> +			goto end;
> +
> +		ret = idt821034_write_slic_raw(idt821034, i, 0);
> +		if (ret)
> +			goto end;
> +
> +	}
> +	ret = 0;
> +end:
> +	mutex_unlock(&idt821034->mutex);
> +	return ret;
> +}
> +
> +static int idt821034_gpio_init(struct idt821034 *idt821034)
> +{
> +	int ret;
> +
> +	ret = idt821034_reset_gpio(idt821034);
> +	if (ret)
> +		return ret;
> +
> +	idt821034->gpio_chip.owner = THIS_MODULE;

Is the owner really needed ?

> +	idt821034->gpio_chip.label = dev_name(&idt821034->spi->dev);
> +	idt821034->gpio_chip.parent = &idt821034->spi->dev;
> +	idt821034->gpio_chip.base = -1;
> +	idt821034->gpio_chip.ngpio = 5 * 4; /* 5 GPIOs on 4 channels */
> +	idt821034->gpio_chip.get_direction = idt821034_chip_get_direction;
> +	idt821034->gpio_chip.direction_input = idt821034_chip_direction_input;
> +	idt821034->gpio_chip.direction_output = idt821034_chip_direction_output;
> +	idt821034->gpio_chip.get = idt821034_chip_gpio_get;
> +	idt821034->gpio_chip.set = idt821034_chip_gpio_set;
> +	idt821034->gpio_chip.can_sleep = true;
> +
> +	return devm_gpiochip_add_data(&idt821034->spi->dev, &idt821034->gpio_chip,
> +				      idt821034);
> +}
> +#else /* IS_ENABLED(CONFIG_GPIOLIB) */
> +static int idt821034_gpio_init(struct idt821034 *idt821034)
> +{
> +	return 0;
> +}
> +#endif
> +
> +static int idt821034_spi_probe(struct spi_device *spi)
> +{
> +	struct idt821034 *idt821034;
> +	int ret;
> +
> +	spi->bits_per_word = 8;
> +	ret = spi_setup(spi);
> +	if (ret < 0)
> +		return ret;
> +
> +	idt821034 = devm_kzalloc(&spi->dev, sizeof(*idt821034), GFP_KERNEL);
> +	if (!idt821034)
> +		return -ENOMEM;
> +
> +	idt821034->spi = spi;
> +
> +	mutex_init(&idt821034->mutex);
> +
> +	spi_set_drvdata(spi, idt821034);
> +
> +	ret = devm_snd_soc_register_component(&spi->dev, &idt821034_component_driver,
> +					      &idt821034_dai_driver, 1);
> +	if (ret)
> +		return ret;
> +
> +	ret = idt821034_gpio_init(idt821034);
> +	if (ret)
> +		return ret;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id idt821034_of_match[] = {
> +	{ .compatible = "renesas,idt821034", },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, idt821034_of_match);
> +
> +static const struct spi_device_id idt821034_id_table[] = {
> +	{ "idt821034", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(spi, idt821034_id_table);
> +
> +static struct spi_driver idt821034_spi_driver = {
> +	.driver  = {
> +		.name   = "idt821034",
> +		.of_match_table = idt821034_of_match,
> +	},
> +	.id_table = idt821034_id_table,
> +	.probe  = idt821034_spi_probe,
> +};
> +
> +module_spi_driver(idt821034_spi_driver);
> +
> +MODULE_AUTHOR("Herve Codina <herve.codina at bootlin.com>");
> +MODULE_DESCRIPTION("IDT821034 ALSA SoC driver");
> +MODULE_LICENSE("GPL");


More information about the Alsa-devel mailing list