[PATCH] ALSA: hda/hdmi: run eld notify in delay work

[Lu, Brent]

> >
> > During resolution change, display driver would disable HDMI audio then
> > enable it in a short time. There is possibility that eld notify for
> > HDMI audio enable is called when previous runtime suspend is still
> > running. In this case, the elf nofity just returns and not updating
> > the status of corresponding HDMI pin/port. Here we move the eld nofity
> > to a delay work so we don't lose it.
> >
> > Signed-off-by: Brent Lu <brent.lu at intel.com>
> 
> We have already a dedicated per-pin work for the delayed ELD check.
> Can we reuse it instead of inventing yet another work?
> More work needs more cares, and better to avoid unless really needed (e.g.
> you forgot cleanup at suspend/removal in this patch).
> 
> 
> thanks,
> 
> Takashi

Hi Takashi,

I've checked the hdmi_repoll_eld() and check_presence_and_report() function to see
if we can reuse the per-pin work. I've some questions about reusing the per-pin work:

1. hdmi_repoll_eld() calls snd_hda_jack_tbl_get_mst() function while
   check_presence_and_report() doesn't. Is it ok? 
2. snd_hdac_i915_set_bclk() is called in intel_pin_eld_notify() function. Since it's
   skipped, we need to call it in the per-pin work. Need to add a flag in hdmi_spec_per_pin
   to indicate this situation.
3. We can schedule the per-pin work in intel_pin_eld_notify() when snd_hdac_is_in_pm()
   returns true but there is no guarantee the runtime suspend will finished when the per-pin
  work is schedule to run.

static void hdmi_repoll_eld(struct work_struct *work)
{
	struct hdmi_spec_per_pin *per_pin =
	container_of(to_delayed_work(work), struct hdmi_spec_per_pin, work);
	struct hda_codec *codec = per_pin->codec;
	struct hdmi_spec *spec = codec->spec;
	struct hda_jack_tbl *jack;

	jack = snd_hda_jack_tbl_get_mst(codec, per_pin->pin_nid,
					per_pin->dev_id);
	if (jack)
		jack->jack_dirty = 1;

	if (per_pin->repoll_count++ > 6)
		per_pin->repoll_count = 0;

	mutex_lock(&spec->pcm_lock);
	hdmi_present_sense(per_pin, per_pin->repoll_count);
	mutex_unlock(&spec->pcm_lock);
}

static void check_presence_and_report(struct hda_codec *codec, hda_nid_t nid,
				      int dev_id)
{
	struct hdmi_spec *spec = codec->spec;
	int pin_idx = pin_id_to_pin_index(codec, nid, dev_id);

	if (pin_idx < 0)
		return;
	mutex_lock(&spec->pcm_lock);
	hdmi_present_sense(get_pin(spec, pin_idx), 1);
	mutex_unlock(&spec->pcm_lock);
}

Regards,
Brent