[PATCH v1 2/2] dt-bindings: ASoC: simple-card: Add system-clock-id property

Aidan MacDonald aidanmacdonald.0x0 at gmail.com
Wed Oct 26 16:48:21 CEST 2022


Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org> writes:

> And the remaining piece I don't get is that these are not bindings for
> codec, but for sound audio card. You want to set "system-clock-id"
> property for audio card, while putting clock from codec, which will be
> used to pass back to the codec... so it is a property of the codec, not
> of the audio card. IOW, NAU8821_CLK_* does not configure here the clock
> of the system, but only, only clock of the codec.

The system clock is controlled at the DAI level, it's specific to one
DAI on one component. The simple-card device node has sub-nodes for the
DAI links, and each DAI link node has sub-nodes for the DAIs within the
link. "system-clock-id" is a property on the DAI nodes, so it's not a
card-level property, just one part of the overall card definition.

Since the clock ID is something defined by the codec it would naturally
be a value defined by the codec, but the *configuration* of the codec is
part of the sound card because it depends on how everything is connected
together. If you used the same codec in a different machine it would
have a different configuration.

Regards,
Aidan


More information about the Alsa-devel mailing list