[PATCH v2 1/3] ASoC: hdmi-codec: Add event handler for hdmi TX

Jiaxin Yu (俞家鑫) Jiaxin.Yu at mediatek.com
Mon Nov 28 16:07:22 CET 2022


On Fri, 2022-11-25 at 12:18 +0000, Mark Brown wrote:
> On Fri, Nov 25, 2022 at 05:44:11PM +0800, Jiaxin Yu wrote:
>
> > +/*
> > + * PCM trigger callback.
> > + * Mandatory
> > + */
> > +int (*trigger)(struct device *dev, int cmd);
> > +
>
> Making this mandatory would break all existing users, though...
>
Yes, it should be described as optional.

> > +switch (event) {
> > +case SND_SOC_DAPM_PRE_PMU:
> > +if (hcp->hcd.ops->trigger)
> > +hcp->hcd.ops->trigger(component->dev->parent,
> > SNDRV_PCM_TRIGGER_START);
>
> ..it's not actually mandatory so it's just the comment that's wrong.

Agreed.

> I'm a little unclear why this is being implemented as a DAPM
> operation
> rather than having the driver forward the PCM trigger op if it's
> needed?
> Or alternatively if a DAPM callback is needed why not provide one
> directly rather than hooking into the trigger function - that's going
> to
> be called out of sequence with the rest of DAPM and be potentially
> confusing given the very different environments that trigger and DAPM
> operations run in.  A quick glance at the it6505 driver suggests it'd
> be
> happier with a DAPM callback.

Let me describe the hardware connection about mt8186 with it6505(hdmi)
and rt1015p(speakers).

                       ==>it6505
                     =
DL1(FE) ==>I2S3(BE) =
                     =
                       ==>rt1015p

They shared the same one i2s port, but we'd like to control them
separately. So if hdmi-codec use the PCM trigger op, whne we turn on
the speaker, hdmi-codec's PCM trigger op is also executed, resulting in
sound on both devices.
Is there another way to control them separately? Thank you.




************* MEDIATEK Confidentiality Notice
 ********************
The information contained in this e-mail message (including any
attachments) may be confidential, proprietary, privileged, or otherwise
exempt from disclosure under applicable laws. It is intended to be
conveyed only to the designated recipient(s). Any use, dissemination,
distribution, printing, retaining or copying of this e-mail (including its
attachments) by unintended recipient(s) is strictly prohibited and may
be unlawful. If you are not an intended recipient of this e-mail, or believe

that you have received this e-mail in error, please notify the sender
immediately (by replying to this e-mail), delete any and all copies of
this e-mail (including any attachments) from your system, and do not
disclose the content of this e-mail to any other person. Thank you!


More information about the Alsa-devel mailing list