[PATCH v2] ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register

Chancel Liu chancel.liu at nxp.com
Wed Nov 9 13:13:54 CET 2022


DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.

Signed-off-by: Chancel Liu <chancel.liu at nxp.com>
---
 sound/soc/codecs/wm8962.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index b4b4355c6728..b901e4c65e8a 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -2503,6 +2503,14 @@ static void wm8962_configure_bclk(struct snd_soc_component *component)
 		snd_soc_component_update_bits(component, WM8962_CLOCKING2,
 				WM8962_SYSCLK_ENA_MASK, WM8962_SYSCLK_ENA);
 
+	/* DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
+	 * correct frequency of LRCLK and BCLK. Sometimes the read-only value
+	 * can't be updated timely after enabling SYSCLK. This results in wrong
+	 * calculation values. Delay is introduced here to wait for newest
+	 * value from register. The time of the delay should be at least
+	 * 500~1000us according to test.
+	 */
+	usleep_range(500, 1000);
 	dspclk = snd_soc_component_read(component, WM8962_CLOCKING1);
 
 	if (snd_soc_component_get_bias_level(component) != SND_SOC_BIAS_ON)
-- 
2.25.1



More information about the Alsa-devel mailing list