[PATCH] soundwire: cadence: recheck device0 attachment after status change

[Vinod Koul]

On 20-04-22, 10:30, Bard Liao wrote:
> From: Pierre-Louis Bossart <pierre-louis.bossart at linux.intel.com>
> 
> This patch adds a status check after device0 attachment to solve race
> conditions observed during attachment with multiple devices per link
> 
> The sequence is the following
> 
> 1) deviceA attaches as device0
> 
> 2) the hardware detects a device0 status change and throws an
>  interrupt.
> 
> 3) the interrupt handler schedules the work function
> 
> 4) the workqueue starts, we read the status
> slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0);
> slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1);
> 
> we deal with the status change and program deviceA device number to a
> non-zero value.
> 
> 5) deviceB attaches as device0, the device0 status seen by the
> hardware does not change.
> 
> 6) we clear the CDNS_MCP_SLAVE_INTSTAT0/1 registers -> we will never detect
> deviceB!
> 
> This patch suggest re-checking in a loop the device0 status with a
> PING frame, i.e. using the real device0 status instead of information
> on status changes.

Applied, thanks

-- 
~Vinod