[RFC PATCH v2 1/6] ASoC: dt-bindings: Convert rt5659 bindings to YAML schema

[Krzysztof Kozlowski]

On 28/03/2022 08:14, Sameer Pujar wrote:
> Convert rt5659.txt DT binding to YAML schema. This binding is applicable
> to rt5658 and rt5659 audio CODECs.
> 
> Signed-off-by: Sameer Pujar <spujar at nvidia.com>
> Cc: Oder Chiou <oder_chiou at realtek.com>
> ---
>  .../devicetree/bindings/sound/realtek,rt5659.yaml  | 112 +++++++++++++++++++++
>  Documentation/devicetree/bindings/sound/rt5659.txt |  89 ----------------
>  2 files changed, 112 insertions(+), 89 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5659.yaml
>  delete mode 100644 Documentation/devicetree/bindings/sound/rt5659.txt
> 
> diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml
> new file mode 100644
> index 0000000..3bd9b6f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/realtek,rt5659.yaml
> @@ -0,0 +1,112 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/realtek,rt5659.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RT5658 and RT5659 audio CODECs
> +
> +description: This device supports I2C only.
> +
> +maintainers:
> +  - Oder Chiou <oder_chiou at realtek.com>
> +
> +allOf:
> +  - $ref: name-prefix.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - realtek,rt5658
> +      - realtek,rt5659
> +
> +  reg:
> +    description: The I2C address of the device

Skip the description, it's obvious.

> +    maxItems: 1
> +
> +  interrupts:
> +    description: The CODEC's interrupt output

Ditto.

> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Master clock (MCLK) to the CODEC
> +
> +  clock-names:
> +    items:
> +      - const: mclk
> +
> +  realtek,in1-differential:
> +    description: MIC1 input is differntial and not single-ended.

typo (differential)

> +    type: boolean
> +
> +  realtek,in3-differential:
> +    description: MIC3 input is differntial and not single-ended.
> +    type: boolean
> +
> +  realtek,in4-differential:
> +    description: MIC3 input is differntial and not single-ended.

MIC4?

> +    type: boolean
> +
> +  realtek,dmic1-data-pin:
> +    description: DMIC1 data pin usage
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum:
> +      - 0 # dmic1 is not used
> +      - 1 # using IN2N pin as dmic1 data pin
> +      - 2 # using GPIO5 pin as dmic1 data pin
> +      - 3 # using GPIO9 pin as dmic1 data pin
> +      - 4 # using GPIO11 pin as dmic1 data pin
> +
> +  realtek,dmic2-data-pin:
> +    description: DMIC2 data pin usage
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum:
> +      - 0 # dmic2 is not used
> +      - 1 # using IN2P pin as dmic2 data pin
> +      - 2 # using GPIO6 pin as dmic2 data pin
> +      - 3 # using GPIO10 pin as dmic2 data pin
> +      - 4 # using GPIO12 pin as dmic2 data pin
> +
> +  realtek,jd-src:
> +    description: Jack detect source
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum:
> +      - 0 # No JD is used
> +      - 1 # using JD3 as JD source
> +      - 2 # JD source for Intel HDA header
> +
> +  realtek,ldo1-en-gpios:
> +    description: The GPIO that controls the CODEC's LDO1_EN pin.

maxItems

> +
> +  realtek,reset-gpios:
> +    description: The GPIO that controls the CODEC's RESET pin.

maxItems

What about the ports node?


Best regards,
Krzysztof