[PATCH v2 09/20] hda: cs35l41: Always configure the DAI

Lucas Tanure tanureal at opensource.cirrus.com
Fri Mar 4 16:07:10 CET 2022


The Dai configuration is always the same and
should always configured during open.

Signed-off-by: Lucas Tanure <tanureal at opensource.cirrus.com>
---
 sound/pci/hda/cs35l41_hda.c | 10 ++--------
 1 file changed, 2 insertions(+), 8 deletions(-)

diff --git a/sound/pci/hda/cs35l41_hda.c b/sound/pci/hda/cs35l41_hda.c
index fe6f6a208d29..4c99dcac2dd7 100644
--- a/sound/pci/hda/cs35l41_hda.c
+++ b/sound/pci/hda/cs35l41_hda.c
@@ -111,8 +111,6 @@ static const struct reg_sequence cs35l41_reset_to_safe[] = {
 static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_no_bst = {
 	.probe		= cs35l41_reset_to_safe,
 	.num_probe	= ARRAY_SIZE(cs35l41_reset_to_safe),
-	.open		= cs35l41_hda_config,
-	.num_open	= ARRAY_SIZE(cs35l41_hda_config),
 	.prepare	= cs35l41_safe_to_active,
 	.num_prepare	= ARRAY_SIZE(cs35l41_safe_to_active),
 	.cleanup	= cs35l41_active_to_safe,
@@ -120,8 +118,6 @@ static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_no_bst = {
 };
 
 static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_ext_bst = {
-	.open		= cs35l41_hda_config,
-	.num_open	= ARRAY_SIZE(cs35l41_hda_config),
 	.prepare	= cs35l41_start_ext_vspk,
 	.num_prepare	= ARRAY_SIZE(cs35l41_start_ext_vspk),
 	.cleanup	= cs35l41_stop_ext_vspk,
@@ -129,8 +125,6 @@ static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_ext_bst = {
 };
 
 static const struct cs35l41_hda_reg_sequence cs35l41_hda_reg_seq_int_bst = {
-	.open		= cs35l41_hda_config,
-	.num_open	= ARRAY_SIZE(cs35l41_hda_config),
 	.prepare	= cs35l41_hda_start_bst,
 	.num_prepare	= ARRAY_SIZE(cs35l41_hda_start_bst),
 	.cleanup	= cs35l41_hda_stop_bst,
@@ -146,8 +140,8 @@ static void cs35l41_hda_playback_hook(struct device *dev, int action)
 
 	switch (action) {
 	case HDA_GEN_PCM_ACT_OPEN:
-		if (reg_seq->open)
-			ret = regmap_multi_reg_write(reg, reg_seq->open, reg_seq->num_open);
+		ret = regmap_multi_reg_write(reg, cs35l41_hda_config,
+					     ARRAY_SIZE(cs35l41_hda_config));
 		break;
 	case HDA_GEN_PCM_ACT_PREPARE:
 		if (reg_seq->prepare)
-- 
2.35.1



More information about the Alsa-devel mailing list