[PATCH] ASoC: dt-bindings: atmel-i2s: Convert to json-schema

Ryan.Wanner at microchip.com Ryan.Wanner at microchip.com
Wed Jul 13 18:25:38 CEST 2022


From: Ryan Wanner <Ryan.Wanner at microchip.com>

Convert atmel i2s devicetree binding to json-schema.
Change file name to match json-schema naming.

Signed-off-by: Ryan Wanner <Ryan.Wanner at microchip.com>
---
 .../bindings/sound/atmel,sama5d2-i2s.yaml     | 83 +++++++++++++++++++
 .../devicetree/bindings/sound/atmel-i2s.txt   | 46 ----------
 2 files changed, 83 insertions(+), 46 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
 delete mode 100644 Documentation/devicetree/bindings/sound/atmel-i2s.txt

diff --git a/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
new file mode 100644
index 000000000000..1cadc476565c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel,sama5d2-i2s.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/atmel,sama5d2-i2s.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel I2S controller
+
+maintainers:
+  - Nicolas Ferre <nicolas.ferre at microchip.com>
+  - Alexandre Belloni <alexandre.belloni at bootlin.com>
+  - Claudiu Beznea <claudiu.beznea at microchip.com>
+
+description:
+  Atmel I2S (Inter-IC Sound Controller) bus is the standard
+  interface for connecting audio devices, such as audio codecs.
+
+properties:
+  compatible:
+    const: atmel,sama5d2-i2s
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    description:
+      Only the peripheral clock (pclk) is required. The generated clock (gclk)
+      and the I2S mux clock (muxclk) are optional and should only be set together,
+      when Master Mode is required.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: gclk
+      - const: muxclk
+    minItems: 1
+
+  dmas:
+    description:
+      Should be one per channel name listed in the dma-names property.
+    maxItems: 2
+
+  dma-names:
+    items:
+      - const: tx
+      - const: rx
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/dma/at91.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2s at f8050000 {
+        compatible = "atmel,sama5d2-i2s";
+        reg = <0xf8050000 0x300>;
+        interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+        dmas = <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(31))>,
+               <&dma0
+                (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+                AT91_XDMAC_DT_PERID(32))>;
+        dma-names = "tx", "rx";
+        clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
+        clock-names = "pclk", "gclk", "muxclk";
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_i2s0_default>;
+    };
diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
deleted file mode 100644
index 40549f496a81..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-i2s.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Atmel I2S controller
-
-Required properties:
-- compatible:     Should be "atmel,sama5d2-i2s".
-- reg:            Should be the physical base address of the controller and the
-                  length of memory mapped region.
-- interrupts:     Should contain the interrupt for the controller.
-- dmas:           Should be one per channel name listed in the dma-names property,
-                  as described in atmel-dma.txt and dma.txt files.
-- dma-names:      Two dmas have to be defined, "tx" and "rx".
-                  This IP also supports one shared channel for both rx and tx;
-                  if this mode is used, one "rx-tx" name must be used.
-- clocks:         Must contain an entry for each entry in clock-names.
-                  Please refer to clock-bindings.txt.
-- clock-names:    Should be one of each entry matching the clocks phandles list:
-                  - "pclk" (peripheral clock) Required.
-                  - "gclk" (generated clock) Optional (1).
-                  - "muxclk" (I2S mux clock) Optional (1).
-
-Optional properties:
-- pinctrl-0:      Should specify pin control groups used for this controller.
-- princtrl-names: Should contain only one value - "default".
-
-
-(1) : Only the peripheral clock is required. The generated clock and the I2S
-      mux clock are optional and should only be set together, when Master Mode
-      is required.
-
-Example:
-
-	i2s at f8050000 {
-		compatible = "atmel,sama5d2-i2s";
-		reg = <0xf8050000 0x300>;
-		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(31))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(32))>;
-		dma-names = "tx", "rx";
-		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&i2s0muxck>;
-		clock-names = "pclk", "gclk", "muxclk";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2s0_default>;
-	};
-- 
2.34.1



More information about the Alsa-devel mailing list