[PATCH v4 04/14] dt-bindings: dma: dw-axi-dmac: extend the number of interrupts

Conor Dooley conor at kernel.org
Fri Jul 1 21:22:50 CEST 2022


From: Conor Dooley <conor.dooley at microchip.com>

The Canaan k210 apparently has a Sysnopsys Designware AXI DMA
controller, but according to the documentation & devicetree it has 6
interrupts rather than the standard one. Support the 6 interrupt
configuration by unconditionally extending the binding to a maximum of
8 per-channel interrupts thereby matching the number of possible
channels.

Link: https://canaan-creative.com/wp-content/uploads/2020/03/kendryte_standalone_programming_guide_20190311144158_en.pdf #Page 51
Reviewed-by: Serge Semin <fancer.lancer at gmail.com>
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
 .../devicetree/bindings/dma/snps,dw-axi-dmac.yaml          | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
index 4324a94b26b2..98c2ab18d04f 100644
--- a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
@@ -34,7 +34,12 @@ properties:
       - const: axidma_apb_regs
 
   interrupts:
-    maxItems: 1
+    description: |
+      If the IP-core synthesis parameter DMAX_INTR_IO_TYPE is set to 1, this
+      will be per-channel interrupts. Otherwise, this is a single combined IRQ
+      for all channels.
+    minItems: 1
+    maxItems: 8
 
   clocks:
     items:
-- 
2.37.0



More information about the Alsa-devel mailing list